When choosing SCADA Internationalyou get solutions that are:• Made for the wind sector• Customized• Scalable• Open• Reliable• And support your business model
Upgrade your Old Technology
OneView® Park Control Unit
The Master ControlThe OneView® PCU will act as the Master Control and secure that the turbines are in the correct state at all times: If one sensor or partner system requires a specific turbine to be stopped, then the OneView® PCU will stop the turbine, and as long as the stop command is still true, no sensor or partner system will be able to start or reset the turbine and in this way overrule this stop command.
OneView® Park Control Unit (PCU) is SCADA International’s advanced solution for control of a single wind turbine or for multiple wind turbines and can distinguish between multiple owners. It interacts with Utility, Trader and all available data and sensors. OneView® PCU is designed for all kinds of grid code requirements, direct trading and secured for future demands. So no matter if you are investing in a Park Controller for the first time or need to replace or upgrade your existing solution, e.g. an Oltec FÜ, the OneView® PCU is the right choice.
Park Control Unit
Handling set points and multiple sensorsThe OneView® PCU makes it possible to comply with legislative and local requirements and handles full park and turbine control, also in combination with existing additional options e.g. ice detection, shadow detection, bat control, noise control, aviation light and more. The OneView® PCU supports past used interfaces as well as modern and new technologies for interfacing setpoints with utility and other systems, flexible and modularly extendable.
Features• One master system and several subsystems acting
as distributed I/O’s• Extended capabilities for automatic control• Higher availability and administration on a new level• 100% compliant with OneView® SCADA or other
Software systems• Upgrade to handle more input simultaneously, e.g.
Further signals from turbine beside standard signal list
Utility Active Power Set point Trader Active Power Set point Manual Remote Commands Ice Detection Input Shadow Detection Input Bat Control Input Noise Control Input Aviation Light Input Ready for implementing additional
sensors
Benefits• Modern Remote control of wind parks• Safe upgrade also for old parks• Secure communication over the internet• Improved earnings due to higher availability• A flexible and secure solution for direct trading• Increased earnings due to a more efficient business
operation
Stand-alone or OneView® SCADA integratedThe OneView® PCU can easily be implemented as an asset into the OneView® SCADA solution i.e. all data from the OneView® PCU can be presented in the One View® SCADA solution and the event information used for calculating lost production and availability.
The OneView® PCU can also be used as a stand-alone solution where the data are accessible on an open communication interface: Live data and the event log from the PCU can be accessed via OPC UA and the same applies to remote commands such as Start, Stop, Reset and active power set points.
Denmark (HQ) United Kingdom USASCADA International Inc.319 SW Washington St, Suite 1000US-Portland, OR 97204Tel: +1 503 922 4723
www.scada-international.com
Germany
Mail: [email protected] • Follow us on Twitter and LinkedIn
PolandSCADA International Sp.z o.o.ul. Mokronoska 2PL-52-407 WroclawTel: +48 71 324 16 54
Since its foundation in 2006, SCADA International has grown to be a leading solution provider within the global
industry. With an extensive track record and deep roots in the Danish wind heritage our services span the entire value chain including SCADA Hardware Solutions, Software Solutions, Installlation & Commisssioning, Consulting and Value Adding Services.
Headquartered in Denmark, SCADA International employs close to 100 wind and SCADA specialists at of fices in Germany, Poland, Ukraine, United Kingdom and USA. The company is certified according to ISO 9001, ISO 14001 and OHSAS 18001.
When choosing SCADA International you get solutions that are:
Why our customers choose SCADA InternationalAn increasing number of companies in the renewable sector in Europe and North America choose SCADA International as their partner when it comes to SCADA systems and SCADA installation, surveillance, support and maintenance.
Company references• Afaplan• Aldesa Nowa Energia• Centrica Renewables
Energy• DONG Energy• E.ON• EDF Energies Nouvelles
• Enel• Energia Renewables• Eneria• ESB International• Eurowind Energy• GE Wind Energy• Nexus Energie
• Nordex• Ostwind• PGE Energia Natury• RegEnPro• ScottishPower• SEMCO Maritime• Senvion
•• Customized• Scalable• Open• Reliable• And support your business model
• Siemens• STEAG New Energies• Suzlon Energy• TransAlta Corporation• Vestas• VATTENFALL• WKN AG