TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED
Personal GPS Tracker User Manual
TL-102 User Manual
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED
Contents
1. INTRODUCTION ............................................................................. 1
2. NEW CONTENTS ............................................................................. 2
3. MAIN FEATURES ............................................................................ 2
4. APPLICATIONS ............................................................................... 2
5. SPECIFICATION ............................................................................... 3
6. START OPERATION ......................................................................... 3
7. MAIN FUNCTIONS INSTRUCTIONS .................................................. 4
8. GPS TRACKING PLATFORM ........................................................... 10
9. NOTE ........................................................................................... 11
10. SMS COMMANDS LIST ................................................................. 12
11. COMMON ALARM NOTES ............................................................ 14
12. EXTERNAL INTERFACE DEFINITION DESCRIPTION ......................... 15
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 1
1. Introduction
The GPS tracking system is an integrated GPS/GSM/GPRS device that achieves
real-time location tracking and anti - theft function. The positioning system can
automatically obtain the longitude and latitude coordinate data of person, pet,
vehicles and various information collected by the device. This data is transmitted
to the monitoring platform through the built-in GPRS module and is compatible
with various monitoring software. The data can also be feedback to the user via
a GSM text message. Users can positioning and monitor remote targets with a
free Google earth map.
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 2
2. New Contents
2.1 Easy Install: It is very light, you can fix it by 3M tape.
2.2 Tamper alarm, It has light sensor, if some move it, you will get message
2.3 Position accuracy combines the GPS info and GSM base station info.
2.4 Bluetooth: it integrate Bluetooth function.
3. Main Features
Tracker Software
2G/3G Network
Setting device by phone
Real-time tracking
Playback historical tracking
ACC detection and cut off ACC function
Machine burglar alarm
ADC input
SOS alert/Fall down/Geo-fence alarm
Speeding alarm/Low battery alarm
Bluetooth settings parameters
OTA firmware upgrade
Accept ODM and OEM
Tracking platform and Android App
Based on Google map or Google earth
Support more than 10000 users
Easy to manage
Online navigation
Real-time tracking function
Set the discontinuous locating function
Playback historical tracking
SOS alert
Speeding alarm
Geo-fence alarm
Distance measurement
4. Applications
Protect the Child/Elderly/Disabled/Pet
Personal Management
Car Rental/Smell Car Team Management
Tracking System for Express/Carriers/Logistics
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 3
5. Specification
Content Specs
Dimension 45mm * 90mm * 15mm
Bluetooth 4.0
Network GSM/GPRS
Band 2G: 850/900/1800/1900Mhz
SIM Card Type Micro SIM Card
GPS chip MTK
GPS sensitivity
Cold start:-148dBm
Warm start:-163dBm
Hot start: -165dBm
GPS accuracy Static: 2.5m, Speed: 0.1m/s
Input voltage 9-36V
Analog input 0-12V
ACC detection input 0-12V,access to the charged ACC terminal
ACC control output Open drain output, need external relay
Start time
Cold start: 31s
Warm start: 26s
Hot start: 1s
Battery Chargeable 3.7V 140mAH
Operation temperature -20°C to +65°C
Humidity 5%--95% non-condensing
6. Start Operation
The following is the device structure diagram:
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 4
Front side Black side
1 2 3 6
4 5 7
1 GSM indicator light
2 Power switch
3 GPS indicator light
4 SIM slot
5 USB port
6 External cable
7 Light sensor
Standing outside, hold the device where it has a clear and unobstructed view of
the sky. Switch the device on or off, press and hold the side ‘On/Off’ button, all
four lights will flash.
7. Main Functions Instructions
7.1 Install SIM card
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 5
7.1.1. Remove the cover of the case and insert the SIM card into the card slot, as
shown above;
7.1.2. Close the case
7.2. External wiring
Marked by the line logo in the car, if not used, please use electrical tape wraps to
protect it.
7.3 Serial port tool installation
7.3.1 Install USB driver, open PL2303_v118.exe, and restart the computer after install
successful.
7.3.2 See if the port configuration is successful in the “computer”-“device manager”,
as the below picture in the left:
7.3.3 Start the serial port tool and set, as the below picture in the right:
7.4 SOCKET tool installation
Start SOCKET software, protocol selection TCP SERVER, according to the default IP
address settings, modify the local port number, click connect as the following
picture:
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 6
7.5 Machine Function Setting
Through the USB serial port settings, place the machine in the base, and through
the data cable to connect the base with the USB converter, and then set the
machine through the serial port functions. It also can pass SMS or GPRS SOCKET
network debugging assistant to set the machine function.
7.6 Restore factory setting
Send command “SET1”via USB, or send command “RESET!”via SMS, or send command
“:RESET!#”via GPRS.
7.7. Set SMS password
Send the command "SETH + new password" through the USB serial port tool or
send the command "password + H + new password" via SMS or send the command
"123456 + H + new password #" via SOCKET, The factory password is 123456, And
the new password must be six digits.
7.8. Set the authorized phone number
Send the command "SETA1 + phone number" through the USB serial port tool, or
send the command "password + A1 + phone number" via SMS or send the
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 7
command "123456 + A1 + phone number #" via SOCKET. The factory password is
123456, and A1 is the first number, which can be set to A8 at most.
7.9 Set GPRS TCP / IP connection address
IP Connection: Send the command "SETC + APN +, + IP +: + Port" via USB serial port;
or send the command "password + C + APN +, + IP +: + Port" via SMS or send the
command via SOCKET ": 123456 + C + APN +, + IP +: + Port #" The APN can be
obtained from the local operator.
Domain Name Connection: Send the command "SETRhttp: // + Domain +; Port" via
the USB serial port tool; or send the command "password + Rhttp: // + Domain +; +
Port" via SMS or send the command via SOCKET: 123456 + Rhttp: // + Domain +; +
Port # ".
7.10 Turn GPRS on or off
Send SMS "password + D" via SMS to enable GPRS connection. If GPRS is connected,
you can send SOCKET command "123456 + D" to reconnect; send SMS "password +
E" via SMS or send "123456 + E "to turn off the GPRS connection.
7.11 Single positioning
Send the command "password + F" via SMS, or send the command "123456 + F #"
via SOCKET. After the device receives the command successfully, it will start GPS to
get the latest coordinates and reply to SMS or GPRS. If you get a GPS failure, up to
four minutes will reply with invalid information.
7.12 Turn on continuous positioning
Send the command "SET + M1, + xxxy" via USB serial port, send the command
"password + M1, + xxxy" via SMS, or send the command "123456 + M1, + xxxy #"
via SOCKET. While XXX represents three times, y is S/M/H (second/minute/time),
for example, SETM1, 005M means to send a location information every 5 minutes.
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 8
7.13 Set the SOS/BMA calls for one-way monitoring
Send the command "SETU2" via the USB serial port tool, or send the command
"password + U2" via SMS, or send the command ": 123456 + U2 #" via GPRS.
7.14 Shut off and resume ACC function
Send the command "SETT1" via the USB serial port tool, or send the command
"123456 T1" via SMS or send the command "123456 T1 #" via SOCKET to cut off
the ACC, Send the command "SETT0" via the USB serial port tool, or send the
command "123456T0" via SMS or send the command ": 123456T0 #" via SOCKET to
recover the ACC.( Note: Only after the car has been turned off as well as unplug the
key this will take effect.)
7.15 OTA wireless firmware upgrade
Send the command "password + UV" via SMS, or send the command ": 123456 +
UV #" via GRPS, the device will automatically enter the firmware upgrade.
If you need to set up to upgrade a firmware version, you can add a version after the
command UV. For example, "123456UV02" indicates that you are upgrading to
version 02 firmware.
Note that using the OTA firmware upgrade method, make sure that the battery
charge is above 50%, otherwise OTA upgrade will not be performed until the
charge is over 50%.
If OTA fails to upgrade three times, the OTA upgrade will be canceled.
If the OTA upgrade is successful, the machine reboots twice for new firmware
upgrades and new firmware backups.
7.16 USB online firmware upgrade
7.16.1 Plug the USB cable into the USB port of device and connect to the PC via a
USB converter.
7.16.2 Open the USB serial port tool, set the serial port
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 9
according to the picture of right.
7.16.3 Click "Open File" to import the latest firmware
(file format is bin)
7.16.4 Send command "SETUV"
7.16.5 The device will reply "OK".
7.16.6 When the device sends the command "MCU Is Ready Now!" It means the
machine
is Ready to send bin file within ten seconds.
7.16.7 When the device is successfully received, it will enter the firmware upgrade.
Do not operate the device again.
7.16.8 The device restarts twice after the firmware is successfully received to enter
the new firmware upgrade and new firmware backup.
7.16.9 If the command "SETUV" is sent and the device does not
report the "OK" command, the machine may exit the
setting mode when it times out. You can insert the USB
cable again and send the command "SETUV".
7.16.10 After receiving the command "SETUV", the device will
have three chances to execute the firmware upgrade. If all
three upgrades fail, the upgrade will be canceled.
7.17 Bluetooth setting parameters
After the device is powered on normally, parameters of device can be set on the
phone, the specific operation is as follows:
Open the phone Bluetooth, and then search the device, after the search is
complete, you can see the device named 15 IMEI is displayed on the list, and then
click to enter the pairing. After the pairing is successful, you can send the file to the
device. When the file succeed in transfer , the machine will finish automatically
parameter settings. The file is in text format (suffix .txt). The content must be
entered in a specified format (one line for each item, ending with a comma, or
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 10
ending with a comma if there is no parameter), as shown below
8. GPS tracking platform
Platform address: www.glotracking.com
You can login our platform or download Android App
The platform is based on Google map, whose function is very powerful. Users can
select functions according to their needs.
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 11
9. Note
Please follow the instructions below to extend the service life of the tracker.
1. Please follow the instructions to select the appropriate type of SIM card and
follow the instructions to properly install the SIM card.
2. Please keep the surface of the tracker dry. Any liquid will damage the circuit in
the tracker.
3. Avoid using or storing the tracker in dusty areas.
4. Avoid using the tracker in extreme conditions of high temperature and low
temperature.
5. Carefully operate the tracker to avoid violent vibration or shaking the tracker.
6. Clean the tracker with a dry cloth to avoid touching the tracker with chemicals
or unclean cloth.
7. Do not graffiti tracker, which may cause some foreign objects to stay between
the parts of tracker.
8. Do not disassemble or reconfigure the tracker.
9. Please use the original battery and charger, if the use of other batteries or
chargers may cause unnecessary losses.
10. Do not disassemble or refit the use of other antennas, which may interfere with
transmission and increase radiation.
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 12
10. SMS commands list
Function Command Example
Set
authorized number 123456AX,phone number
123456A1,+86158000000
X means the number(1-8)
Delete authorized
number 123456AX,D
123456A1,D
X means the number(1-8)
Ask for IMEI and
Hardware and Software
version
123456B
Set the APN,IP and port 123456CAPN,IP:Port
123456C3gnet,119.122.101.91:9289
you can get the APN from your local
GSM provider. If you want to delete all
Settings: 123456C,
Open GPRS 123456D SMS Only
Close GPRS 123456E Turn off GPRS
Get position by SMS 123456F
Query user Settings 123456G SMS Only
Change SMS password 123456Hxxxxxx 123456H999999
Set GEO fence
123456Ix,y,z,
aabbccddefffgghhiijkkllmmn
nepppqqrrss
123456I1,1,1,51113525N009125670E
50241115N011011173E
x=NO. of the GEO-fence(1-5),
y=1 means on, y=0 means off
z=0 means go in, z=1 means go out
e=N means the north latitude, e=S
means the south latitude
j=E means the east longitude, j=W
means the west longitude
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 13
Set the speeding alarm 123456Jx,yyy
123456J1,080
x=1 means on, x=0 means off
yyy means the alarm speed, it should
be 0-255
Setting the local time
zone 123456Lxyy 123456L+08
Reset RTC time 123456L1,year month day,
hour minute second 123456L1,171013,114530
Set continuous tracking 123456Mx,yyyz
123456M1,005M
x=1 means on, x=0 means off
yyy means time interval. (001-255)
Z means time unit,z=S means second,
z=M means minute, z=H means hour
Set GPRS heartbeat
time. 123456M2,xxxS
123456M2,180
xxx=second(020-255)
Set the low battery
alarm 123456Nx,yy
123456N1,30
x=1 means on, x=0 means off
yy means low electronic number (<45)
Set the username and
password for APN 123456O&&&,@@@
123456Ointernet,internet123
&&&:username
&&&:pass word
Set displacement alarm 123456Px,yyy
123456P1,050
x=1 means on, x=0 means off
yyy: Deviation from current
coordinate distance (<250,unit:10m)
The machine will send the alarm
message when the distance of the
locator moves beyond the set value.
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 14
Set up the GPRS
domain name, port. 123456Rhttp://Domain:Port
123456Rhttp://liaohong.vicp.net:6000
Remove the GPRS
domain name, port. 123456R;
Cut off ACC 123456T1
Recover ACC 123456T0
OTA update 123456UVxxxx
123456UV
xxxx: Represents an upgraded version
without a suffix to upgrade to the
latest version.
factory data reset SET1 This instruction can only be set via
USB.
factory data reset RESET! This command can only be set by SMS
or GPRS.
The machine is reset RESET!1 This command can only be set by SMS
or GPRS.
Note:
The format of USB setting command is “SET + command”.
The format of SMS setting command is “password + command”, and the original
default password is 123456.
The format of GPRS setting command is “123456 + command + #”.
11. Common alarm notes
ALM-B: External loss of alarm
ALM-C: Access to external alarm
ALM-D: Low power alarm
ALM-E: Long-term No GPS signal alarm
ALM-G: GEO alarm
TOPLOVO INDUSTRIAL CO., LIMITED
As a leading manufacturer of GPS Tracker since 2004
Copyright© 2018 --- TOPLOVO INDUSTRIAL CO., LIMITED 15
ALM-H: Displacement alarm
ALM-K: OTA upgrade succeeded
ALM-O: Machine theft alarm
ALM-R: Machine Recovery Alarm
ALM-U: OTA upgrade failed
ALM-V: speeding alarm
12. External Interface Definition Description
Line No. Color Name Remarks
1 Black external car battery negative
2 White ADC input 0-12V 0-12V
3 Brown ACC control output ACC requires an external relay
4 yellow ACC detection input
5 red External car battery positive Support 9-36V
External relay wiring diagram:
TL102 External cable