1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Annual Industry ReportIndustry Expert Panel Submissions
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
2
On Target with Antibody Drug Conjugates
Summary of market predictions
Lymphoma indication
of innovator companies
linker chemistries
portion of this supply chain
“In the past a major failing with ADCs has been that cytotoxic agents were simply not active enough to kill the target cell with such a small amount of payload - o.o1% - however new technologies that improve antibody and antigen conjugation could hold the key to really unlocking their potential. Over the next 10 years we will see ADCs with higher penetration rates, and even products designed for indications beyond cancer – like in!ammation” Vijay Shah
Introduction
anticipated.
ANNUAL INDUSTRY REPORT
PANEL MEMBER
Vijay Shah, Executive Director & Chief Operating O"cer of Piramal Enterprises CO-AUTHOR
Mark Wright, Site Lead, Grangemouth, UK, Piramal Enterprises
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
in!ammation.
Market Potential
products and maintain market position is attractive to
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Targeted Therapies
the treatment severely limits therapeutic success. Greater
the success rate remained low with the "rst monoclonal
did not seem to recruit the immune system to destroy
second looked to direct radioisotopes to the tumour via the
licensed to treat.
irradiation of healthy tissue.1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Improving drug properties
Linker choices
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
area of research.
Forming the links
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Toxin selection
narrow therapeutic window for these compounds.
cap mushroom.
Manufacturing challenges
whether the success of the recent commercialised products
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Drug Regulatory Scrutiny & the Pharmaceutical Industry
Summary of Market Predictions
of safety and quality
the last three years indicates that while many instances of
landscape and meet requirements
comprehensive over the next "ve years
and safety standards
awareness and inadequate appreciation of these continually
ANNUAL INDUSTRY REPORT
PANEL MEMBER
Dilip Shah, CEO, Vision Consulting Group
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
to formulations have increased. It is evident from these
Table 1 Warning Letters by Office of Manufacturing & Product Quality, US FDA
No Issue 2010 2011 2012 2013* Total
A Active Pharmaceutical Ingredients (APIs)
1 Mfg facility inspection 2 8 5 1 16
2 Deviations from cGMP 5 5
3 Change notification - 1 1
Total APIs 7 9 5 1 22
B Finished Pharmaceuticals (Formulations)
1 Mfg facility inspection 2 2
2 Violations of cGMP 5 10 16 12(a) 43
Total Formulations 7 10 16 12 45
Total API + Formulations 14 19 21 13 67 Source: www.fda.gov (a) Includes API Mfg Facility Inspection of one Unit
* To 30 June Only Table 1 shows that during the last 3.5 years warning letters relating to APIs, which largely concern manufacturing facility inspection, have decreased, whereas those relating to formulations have increased. It is evident from these figures that the detection of cGMP violations at formulation units is growing alarmingly. A further analysis of this data shows that 66 companies received a warning letter during the 42-month period, with one company, Apotex, receiving two. Prominent names among those on the receiving end of warning letters highlight both innovators and generics companies, including Boehringer Ingelheim, Hospira, Merck KGaA, Novartis, Novo Nordisk, Sanofi Aventis, SmithKline Beecham, Teva and Wyeth Lederle. Indian companies, which account for 40% of DMFs to date and 37% of ANDAs in 2012, accounted for 12% of the warning letters. ________________________________________________________________________ � Website: http//www.vision-india.com, Email: [email protected] A similar analysis of warning letters issued by the Office of Drug Security, Integrity and Recalls during the same period (Table 2) provides another useful insight, and suggests that internet marketing is still eluding regulatory oversight.
Table 2 Warning Letters by Office of Drug Security, Integrity & Recalls, US FDA
No Issue 2010 2011 2012 2013* Total 1 Internet Marketing of Unapproved and
Misbranded Drugs - 2 6 - 8
Source: www.fda.gov
* Up to 30 June Only The study also examined Drug Recalls, Market Withdrawals & Safety Alerts during the 42-month period, as shown in Table 3.
Table 1 Warning Letters by Office of Manufacturing & Product Quality, US FDA
No Issue 2010 2011 2012 2013* Total
A Active Pharmaceutical Ingredients (APIs)
1 Mfg facility inspection 2 8 5 1 16
2 Deviations from cGMP 5 5
3 Change notification - 1 1
Total APIs 7 9 5 1 22
B Finished Pharmaceuticals (Formulations)
1 Mfg facility inspection 2 2
2 Violations of cGMP 5 10 16 12(a) 43
Total Formulations 7 10 16 12 45
Total API + Formulations 14 19 21 13 67 Source: www.fda.gov (a) Includes API Mfg Facility Inspection of one Unit
* To 30 June Only Table 1 shows that during the last 3.5 years warning letters relating to APIs, which largely concern manufacturing facility inspection, have decreased, whereas those relating to formulations have increased. It is evident from these figures that the detection of cGMP violations at formulation units is growing alarmingly. A further analysis of this data shows that 66 companies received a warning letter during the 42-month period, with one company, Apotex, receiving two. Prominent names among those on the receiving end of warning letters highlight both innovators and generics companies, including Boehringer Ingelheim, Hospira, Merck KGaA, Novartis, Novo Nordisk, Sanofi Aventis, SmithKline Beecham, Teva and Wyeth Lederle. Indian companies, which account for 40% of DMFs to date and 37% of ANDAs in 2012, accounted for 12% of the warning letters. ________________________________________________________________________ � Website: http//www.vision-india.com, Email: [email protected] A similar analysis of warning letters issued by the Office of Drug Security, Integrity and Recalls during the same period (Table 2) provides another useful insight, and suggests that internet marketing is still eluding regulatory oversight.
Table 2 Warning Letters by Office of Drug Security, Integrity & Recalls, US FDA
No Issue 2010 2011 2012 2013* Total 1 Internet Marketing of Unapproved and
Misbranded Drugs - 2 6 - 8
Source: www.fda.gov
* Up to 30 June Only The study also examined Drug Recalls, Market Withdrawals & Safety Alerts during the 42-month period, as shown in Table 3.
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
How Many, and For What?
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Table 3
Drug Recalls, Market Withdrawals & Safety Alerts by Reason, US FDA
No Reason/Problem 2010 2011 2012 2013* Total % of Total 1 Undeclared ingredient;
including sildenafil, acetaminophen, dexamethasone, diclofenac, etc.
17 14 8 9 48 27.0
2 Visible particulates; including fungal microbial contaminants, precipitation/crystallization, brass particulates, etc.
0 12 15 11 38 21.3
3 Unapproved drugs 1 2 7 4 14 7.9
4 Sterility 0 0 4 10 14 7.9
5 Deviations in fill volume, Size/Thickness of Tabs, variations in tablet strength, etc.
0 3 7 1 11 6.2
6 Packaging error; including mislabeled/incorrectly labeled bottles, and bottles containing wrong drugs, etc.
0 6 3 1 10 5.6
7 Quality control and manufacturing processes, insufficiencies in the development of the manufacturing process or non-compliance with drug manufacturing requirements
1 1 0 1 3 1.7
8 Equipment cleaning, leading to product containing trace amounts of other drugs
0 1 0 1 2 1.1
9 Others; including contamination, odour, impurity, leaking container, difficulty in using measure dosing system, etc.
0 18 13 7 38 21.3
Total 19 57 57 45 178 100.0
Source: www.fda.gov * Up to 30 June 2013
Further analysis of Drug Recalls, Market Withdrawals & Safety Alerts, by company, is presented in Table 4 below:
Table 4 Drug Recalls, Market Withdrawals & Safety Alerts by Company, US FDA
No Frequency 2010 2011 2012 2013* Total % of Total
1 1 Time 17 24 30 25 96 80 2 2 Times 1 4 3 6 14 12 3 3 Times 2 1 1 4 3 4 4 Times 1 1 2 2 5 5 Times 1 1 1 6 > 5 Times 2 1 3 2 Total 19 33 36 32 120 100
Table 3
Drug Recalls, Market Withdrawals & Safety Alerts by Reason, US FDA
No Reason/Problem 2010 2011 2012 2013* Total % of Total 1 Undeclared ingredient;
including sildenafil, acetaminophen, dexamethasone, diclofenac, etc.
17 14 8 9 48 27.0
2 Visible particulates; including fungal microbial contaminants, precipitation/crystallization, brass particulates, etc.
0 12 15 11 38 21.3
3 Unapproved drugs 1 2 7 4 14 7.9
4 Sterility 0 0 4 10 14 7.9
5 Deviations in fill volume, Size/Thickness of Tabs, variations in tablet strength, etc.
0 3 7 1 11 6.2
6 Packaging error; including mislabeled/incorrectly labeled bottles, and bottles containing wrong drugs, etc.
0 6 3 1 10 5.6
7 Quality control and manufacturing processes, insufficiencies in the development of the manufacturing process or non-compliance with drug manufacturing requirements
1 1 0 1 3 1.7
8 Equipment cleaning, leading to product containing trace amounts of other drugs
0 1 0 1 2 1.1
9 Others; including contamination, odour, impurity, leaking container, difficulty in using measure dosing system, etc.
0 18 13 7 38 21.3
Total 19 57 57 45 178 100.0
Source: www.fda.gov * Up to 30 June 2013
Further analysis of Drug Recalls, Market Withdrawals & Safety Alerts, by company, is presented in Table 4 below:
Table 4 Drug Recalls, Market Withdrawals & Safety Alerts by Company, US FDA No Frequency 2010 2011 2012 2013* Total % of Total
1 1 Time 17 24 30 25 96 80
2 2 Times 1 4 3 6 14 12
3 3 Times 2 1 1 4 3
4 4 Times 1 1 2 2
5 5 Times 1 1 1
6 > 5 Times 2 1 3 2
Total 19 33 36 32 120 100
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
11
Not Learning from Mistakes
one violation.
Also of concern is the types of default that are on the rise.
industry. It is noteworthy that these incidents declined
and quality medicines.
Attempts to Beat the System
Cultural Change And Communication
wide. It is a slow process that will require patience and
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
12
make more e#ort to communicate the rationale of the
Barriers to Market Entry
which will ultimately reduce competition.
Another point to consider is the need for and likelihood of
thus likely that the industry will have to continue to have to
will push up the price of medicines as companies face
competition.
What’s the Solution?
auditors can only expose technical de"ciencies and help
implementation of processes that could address causative
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Implementing Health- and Science-Based Risk Assessment for Multi-Product Manufacturing
Summary of market predictions
facilities
approach to risk assessment within the next "ve yearssimilar mode of action
manufacture in dedicated facilities
Introduction
ANNUAL INDUSTRY REPORT
PANEL MEMBER
Dr. Mark Carver, Senior Vice President Research & Development and Innovation
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Draft Guidelines Could Prevent Some Biologics from Entering Clinical Trials
few years.
So What’s The Problem?
into shared facilities should carry out an assessment of all relevant product and process characteristics to evaluate
was that the risk assessment should include input from a
maintain patient and operator safety and assure product 1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
in shared facilities.
adverse e#ects are anticipated if individuals are exposed to
expertise to determine.
where likely doses of products are known.
Acceptable Daily Exposure (ADE)no adverse e!ects
(UFc
NOAFL
BWUFc
MF
PK
Permitted Daily Exposure (PDE)
to cause an adverse e#ect if an individual is exposed at or
F1
F2F3
F4
F5
of the toxicity.
Figure 1: Health-Based Limits
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
So Why is a Health-Based Limits Approach Problematic for Some IMPs?
cases where scienti"c data does not support threshold
of parameters are frequently not known when decisions to proceed to manufacture are taken. Important examples
molecules often require the manufacture of early
studies.
calculations.
clinical phase.
developmental products will never make it to clinical trials.
Towards a Solution: Potency Toxicity and Banding
lower failure rate than small molecule pharmaceuticals in
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
handled.
the potential potency of molecules even when there is
Figure 2: Potency of Biologics (Recombinant Proteins)
Lethal Toxins
0.00001
0.0001
0.001
ADE
Indicative
n.b. ADE values and banding boundaries are indicative and are only presented for illustrative purposes.
0.01
0.1
10
100
1,000
10,000
1
ToxinsApoptosis signals
Cytokinesgrowth factors etc
Antibodies,atibody fragments
Insulins
B
C
D
Botulinum Toxins
e.g TNFa
InterferonsInterleukins
Growth factors
InsulinsmAbsAntibody Fragments
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
Lethal Toxins
0.00001
0.0001
0.001
ADE
Indicative
Cleaning acceptance criteriaincreasingly stringent
at each banding boundary
n.b. ADE values and banding boundaries are indicative and are only presented for illustrative purposes.
0.01
0.1
10
100
1,000
10,000
1
ToxinsApoptosis signals
Cytokinesgrowth factors etc
Antibodies,atibody fragments
Insulins
A
B
C
D
Botulinum Toxins
e.g TNFa
InterferonsInterleukins
Growth factors
InsulinsmAbsAntibody Fragments
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
Figure 3 : Potency of biologics – possible ‘banding’ scheme
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
out as part of each new product introduction to con"rm
Towards a Solution: Potency Toxicity and Banding
are put in place to minimise the risk to personnel and patients Even when there is only partial data on early phase
interested parties is required.
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
References
manufacture of di#erent medicinal products in shared facilities
development of a structured approach to select chemical
1 www.pharmaevolution.com
PHARMA INSIGHTS:FORMULATION AND INGREDIENTS
Few would dispute the fact that pharmaceutical formulation has become increasingly challenging. The difficulties all start with the ingredients used to make finished drugs. As more Active Pharmaceutical Ingredient (API) and excipient manufacturing moves offshore, particularly to India and China, there have been increasing complaints of variable quality and tightening supply.
Ingredients have never officially been covered by existing pharmaceutical good manufacturing practices (GMPs), although different countries follow guidelines set by WHO, as well as ICH Q7.
Supply chain disasters of 2008, the heparin recalls and tainted glycerin tragedies, focused attention on the lack of systematic and harmonized global quality control standards for pharmaceutical ingredients.
Sweeping regulations in Europe and the US, namely the Falsified Medicines Directive and the FDA Safety and Innovation Act, aim to address this need, and improve the safety and quality of APIs and ingredients.
Globalization of the market has also heightened awareness that the world’s regulators couldn’t possibly inspect every pharmaceutical ingredients plant or all the new API and ingredient manufacturing facilities coming online. Regulatory authorities, including EMA and FDA, collaborated on some API plant inspections, and have recognized a role for independent third-party auditors for API and ingredients facilities.
This has led to the development of formal cGMP guidelines for excipients and new options such as third-party supplier auditing and qualification programs.
But formulation challenges continue, all along the
pharmaceutical value chain. The unit operations that precede formulation can be extremely difficult to control.
In addition, many developmental products now in the pipeline are insoluble or difficult to work with. “The Venus de Milo is 10 times more soluble in water than many APIs,” noted Shaukat Ali, technical sales manager of BASF’s Pharma Ingredients and Services at a Catalent Applied Drug Delivery Institute training event on June 12.
He said that most APIs now commercially available are insoluble, as well as the growing number of t in the pipeline. “What cannot be dissolved cannot be absorbed, and cannot cure.” Click here for an article on absorption modeling.
CPhI and CPhI PharmaEvolution.com surveyed readers on their experiences and challenges in formulation and ingredients sourcing and management. Responses from 123 industry professionals suggest main areas of concern and overall trends.
Brian Carlin, Director, Open Innovation, at FMC BioPolymer, an expert in excipients; Girish Malhotra, President of Epcot International, an API expert, and Emil Ciurczak, independent NIR spectroscopist and PAT expert; all on CPhI’s Advisory Board; and Irwin Silverstein, VP and COO of IPEA, commented on the overall results, which are summarized in this brief report. IPEA was the first third-party excipient auditing organization, which, together with the Pharmaceutical Quality Group, drafted the cGMP requirements for excipient suppliers.
India The Main Source Of APIs And Ingredients
On the ingredients sourcing side, survey respondents say they are getting most of their APIs and ingredients from India, and, when they partner or outsource any activities, they are
Survey Suggests a Need for Greater Control of Formulation & Ingredient Management CPhI’s first survey on formulation suggests that drugmakers communicate more closely with suppliers, and betterunderstand and control their processes
Introduction
ANNUAL INDUSTRY REPORT
www.cphi.com | www.pharmaevolution.com