© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 1111
PIPELINE INTEGRITY MANAGEMENT SYSTEM
(PIMS)
N Bose BabuN Bose BabuN Bose BabuN Bose Babu
General Manager (TS and O&M), Director , GITL/GIGLGeneral Manager (TS and O&M), Director , GITL/GIGLGeneral Manager (TS and O&M), Director , GITL/GIGLGeneral Manager (TS and O&M), Director , GITL/GIGL
Disclaimer :Disclaimer :Disclaimer :Disclaimer :Disclaimer :Disclaimer :Disclaimer :Disclaimer :
The views and opinions expressed are The views and opinions expressed are solely those of the presenter and do not solely those of the presenter and do not represent the views or opinions of any represent the views or opinions of any company or entity that the presenter is company or entity that the presenter is associated.associated.
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 2222
Objective: Objective: Objective: Objective: Objective: Objective: Objective: Objective: Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures Prevention of Pipeline failures through Integrity Management System.through Integrity Management System.through Integrity Management System.through Integrity Management System.through Integrity Management System.through Integrity Management System.through Integrity Management System.through Integrity Management System.
What happens when disaster strikes…What happens when disaster strikes…
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 3333
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 4444
What is Integrity Management System?What is Integrity Management System?What is Integrity Management System?What is Integrity Management System?
““““AAAA comprehensive,comprehensive,comprehensive,comprehensive, systematicsystematicsystematicsystematic andandandand integratedintegratedintegratedintegrated
processprocessprocessprocess thatthatthatthat includesincludesincludesincludes allallallall thethethethe activitiesactivitiesactivitiesactivities thatthatthatthat areareareare
requiredrequiredrequiredrequired totototo preventpreventpreventprevent aaaa failure”failure”failure”failure”
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 5555
Background of Integrity Management Background of Integrity Management Background of Integrity Management Background of Integrity Management
•ASMEASMEASMEASME BBBB31313131....8888 S,S,S,S, waswaswaswas ffffirstirstirstirst issuedissuedissuedissued inininin 2001200120012001 ---- this standard
was non-mandatory and is designed to supplement
ASME-B 31.8 and applies to onshore pipelines that
transport Natural Gas.
•PNGRB regulation for Integrity Management System
notified in the year 2012.
Why do we need IMS ?Why do we need IMS ?Why do we need IMS ?Why do we need IMS ?
•ToToToTo definedefinedefinedefine aaaa systemicsystemicsystemicsystemic approachapproachapproachapproach....
•ToToToTo identifyidentifyidentifyidentify thethethethe potentialpotentialpotentialpotential riskriskriskrisk bybybyby waywaywayway ofofofof threatsthreatsthreatsthreats andandandand
applyingapplyingapplyingapplying preventivepreventivepreventivepreventive methodsmethodsmethodsmethods....
•AnyAnyAnyAny failurefailurefailurefailure ofofofof pipelinepipelinepipelinepipeline whatwhatwhatwhat sosososo everevereverever reasonsreasonsreasonsreasons maymaymaymay resultresultresultresult
inininin losslosslossloss ofofofof commoditycommoditycommoditycommodity (Natural(Natural(Natural(Natural Gas),Gas),Gas),Gas), effecteffecteffecteffect onononon
environment,environment,environment,environment, losslosslossloss ofofofof propertypropertypropertyproperty andandandand lifelifelifelife....
•TheTheTheThe reputationreputationreputationreputation ofofofof thethethethe organizationorganizationorganizationorganization bebebebe atatatat stakestakestakestake....
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 6666
Integrity Management System: Integrity Management System: Integrity Management System: Integrity Management System: Integrity Management System: Integrity Management System: Integrity Management System: Integrity Management System: is a life cycle approachis a life cycle approachis a life cycle approachis a life cycle approachis a life cycle approachis a life cycle approachis a life cycle approachis a life cycle approach
• It involves all aspects of the Pipeline system right
from Design, Construction, Operation &
Maintenance (O&M) and Integrity Management.
IMP IMP IMP IMP IMP IMP IMP IMP -------- Process Flow DiagramProcess Flow DiagramProcess Flow DiagramProcess Flow DiagramProcess Flow DiagramProcess Flow DiagramProcess Flow DiagramProcess Flow Diagram
Identifying potential Identifying potential Identifying potential Identifying potential
pipeline impact by pipeline impact by pipeline impact by pipeline impact by
threatthreatthreatthreat
Gathering, reviewing, Gathering, reviewing, Gathering, reviewing, Gathering, reviewing,
and integrating dataand integrating dataand integrating dataand integrating data
Risk AssessmentRisk AssessmentRisk AssessmentRisk Assessment
All threats All threats All threats All threats
evaluatedevaluatedevaluatedevaluated
Integrity AssessmentIntegrity AssessmentIntegrity AssessmentIntegrity Assessment
Responses to integrity Responses to integrity Responses to integrity Responses to integrity
assessments and assessments and assessments and assessments and
NONONONO
YESYESYESYES
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 7777
1. Document Program
Plan, Implementing
Proceudre, and
Qualfification Criteria
2. Identity covered tasks and related
evaluation methods
3. Identify persons performing covered tasks
4. Evaluated and Quality persons, Performing
covered tasks, Including recognizing and reacting to
abnormal operating conditions
6. Monitor program performance identify and
analyze potential improvements
7. Maintain program records
5. Continued / Periodic Evaluation of persons
performing covered tasks
8. Manage Change
9. Field
Verification
Inspection
Should
person be
reevaluate
d?
YES
NO
No Longer Qualified
Documentation Flow ChartDocumentation Flow ChartDocumentation Flow ChartDocumentation Flow ChartDocumentation Flow ChartDocumentation Flow ChartDocumentation Flow ChartDocumentation Flow Chart
Collection of DataCollection of DataCollection of DataCollection of DataCollection of DataCollection of DataCollection of DataCollection of Data
Gathering, Reviewing and Integrating DataGathering, Reviewing and Integrating Data
Data RequirementsData Requirements
Data Sources ( from where )Data Sources ( from where )
Data Collection, Review and AnalysisData Collection, Review and Analysis
Data IntegrationData Integration
“Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a “Complete and Accurate data is the key to a successful IMP program”successful IMP program”successful IMP program”successful IMP program”successful IMP program”successful IMP program”successful IMP program”successful IMP program”
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 8888
Integrity Management Program ElementsIntegrity Management Program Elements
Integrity Integrity Integrity Integrity Management Management Management Management
Program Program Program Program ElementsElementsElementsElements
Integrity Management
Plan
Performance Plan
Communication Plan
Management of
Change
Quality Control Plan
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 9999
Integrity Management PlanIntegrity Management PlanIntegrity Management PlanIntegrity Management PlanIntegrity Management PlanIntegrity Management PlanIntegrity Management PlanIntegrity Management Plan
Development of PlanDevelopment of Plan
Updating the PlanUpdating the Plan
Plan FrameworkPlan Framework
Gathering, Reviewing and Integrating DataGathering, Reviewing and Integrating Data
Assess RiskAssess Risk
Integrity AssessmentIntegrity Assessment
Responses to Integrity Assessment, Responses to Integrity Assessment, Mitigation (Repair and Prevention), and Mitigation (Repair and Prevention), and IntervalsIntervals
Performance PlanPerformance PlanPerformance PlanPerformance PlanPerformance PlanPerformance PlanPerformance PlanPerformance Plan
Help an operator answer the following Help an operator answer the following Questions:Questions:
Were all integrity management program Were all integrity management program objectives accomplished?objectives accomplished?
Were pipeline integrity and safety effectively Were pipeline integrity and safety effectively improved through the integrity management improved through the integrity management planplan
Performance Measures CharacteristicsPerformance Measures Characteristics
Process or Activity MeasuresProcess or Activity Measures
Operational MeasuresOperational Measures
Direct Integrity MeasuresDirect Integrity Measures
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11110000
Continue…Continue…
Performance Measurement MethodologyPerformance Measurement Methodology
Performance MeasurementPerformance Measurement
IntraIntra--systemsystem
Industry BasedIndustry Based
Performance ImprovementPerformance Improvement
Communication PlanCommunication PlanCommunication PlanCommunication PlanCommunication PlanCommunication PlanCommunication PlanCommunication Plan
External CommunicationExternal Communication
Landowners and Tenants long the RightsLandowners and Tenants long the Rights--ofof--wayway
Public Officials other than Emergency Public Officials other than Emergency RespondersResponders
Local and Regional Emergency RespondersLocal and Regional Emergency Responders
General PublicGeneral Public
Internal CommunicationInternal Communication
Operator management and other appropriate Operator management and other appropriate operator personnel MUST understand and operator personnel MUST understand and support the Integrity Management Plansupport the Integrity Management Plan
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11111111
Management of Change PlanManagement of Change PlanManagement of Change PlanManagement of Change PlanManagement of Change PlanManagement of Change PlanManagement of Change PlanManagement of Change Plan
Reason for changeReason for change
Authority for approving ChangesAuthority for approving Changes
Analysis of ImplicationsAnalysis of Implications
Acquisition of required work permitsAcquisition of required work permits
DocumentationDocumentationDocumentationDocumentationDocumentationDocumentationDocumentationDocumentationDocument is a KEY to QUALITY… in other words…Document is a KEY to QUALITY… in other words…
““If it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happenIf it isn’t documented, it didn’t happen.”.”
Communication of change to affected Communication of change to affected partiesparties
Time limitationsTime limitations
Qualification of staffQualification of staff
Quality Control PlanQuality Control PlanQuality Control PlanQuality Control PlanQuality Control PlanQuality Control PlanQuality Control PlanQuality Control Plan
Def: Documentation proof that the operator Def: Documentation proof that the operator meets all the requirements of their integrity meets all the requirements of their integrity management programmanagement program
Requirements of QCP:Requirements of QCP:
DocumentationDocumentation
ImplementationImplementation
MaintenanceMaintenance
Responsibilities and Authorities shall be Responsibilities and Authorities shall be CLEARCLEARCLEARCLEARCLEARCLEARCLEARCLEAR
Requirement of Requirement of CompetentCompetentCompetentCompetentCompetentCompetentCompetentCompetent PersonnelPersonnel
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11112222
Risk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk Identification
RISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * ConsequencesRISK = Probability * Consequences
Any Pipeline segment the Risk Identification is a MUSTAny Pipeline segment the Risk Identification is a MUST
Risk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk IdentificationRisk Identification
The Risk can be categorized into three levels:The Risk can be categorized into three levels:
Low = 1 Low = 1 Low = 1 Low = 1 Low = 1 Low = 1 Low = 1 Low = 1 (Rural location, little or no population, small (Rural location, little or no population, small diameter pipe low operating pressure.)diameter pipe low operating pressure.)
Medium = 2 Medium = 2 Medium = 2 Medium = 2 Medium = 2 Medium = 2 Medium = 2 Medium = 2 (Residential location, medium diameter pipe, (Residential location, medium diameter pipe, and medium operating pressure.)and medium operating pressure.)
High = 3 High = 3 High = 3 High = 3 High = 3 High = 3 High = 3 High = 3 (Mostly multi(Mostly multi--story buildings, Large diameter story buildings, Large diameter pipe, and High operating pressure.)pipe, and High operating pressure.)
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11113333
Risk Ranking MatrixRisk Ranking Matrix
FREQUENTYFREQUENTYFREQUENTYFREQUENTY LOWLOWLOWLOW MEDIUMMEDIUMMEDIUMMEDIUM HIGHHIGHHIGHHIGH
Consequence
Low 1 x 1 1 x 2 1 x 3
Medium 2 x 1 2 x 2 2 x 3
High 3 x 1 3 x 2 3 x 3
Risk AssessmentRisk AssessmentRisk AssessmentRisk AssessmentRisk AssessmentRisk AssessmentRisk AssessmentRisk Assessment
“A“A systematicsystematic processprocess inin whichwhich potentialpotentialhazardshazards fromfrom facilityfacility operationoperation areareidentified,identified, andand thethe likelihoodlikelihood andandconsequencesconsequences ofof potentialpotential adverseadverse eventseventsareare estimated”estimated” –– ManagementManagement isis thatthat howhowresourcesresources areare allocatedallocated..
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11114444
What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??What Can A Risk Assessment Do??
Where will the next failure happen?
Where are the hot spots?
How many failures next year?
What is the best use of my resource?
What are the priorities?
When will a failure occur?
•“A risk assessment, no matter what method, cannot be precise because risk “A risk assessment, no matter what method, cannot be precise because risk “A risk assessment, no matter what method, cannot be precise because risk “A risk assessment, no matter what method, cannot be precise because risk
is not a precise concept.”is not a precise concept.”is not a precise concept.”is not a precise concept.”
Risk Assessment Risk Assessment Risk Assessment Risk Assessment Risk Assessment Risk Assessment Risk Assessment Risk Assessment -------- Technical ApproachesTechnical ApproachesTechnical ApproachesTechnical ApproachesTechnical ApproachesTechnical ApproachesTechnical ApproachesTechnical Approaches
• • KnowledgeKnowledgeKnowledgeKnowledgeKnowledgeKnowledgeKnowledgeKnowledge--------basedbasedbasedbasedbasedbasedbasedbased
–– Subject Matter Experts develop ranking based on experienceSubject Matter Experts develop ranking based on experience
• Scenario• Scenario• Scenario• Scenario• Scenario• Scenario• Scenario• Scenario--------based based based based based based based based
–– Events analysis, fault trees, or failureEvents analysis, fault trees, or failure--modemode--andand--effects analysiseffects analysis
• Relative Risk Model • Relative Risk Model • Relative Risk Model • Relative Risk Model • Relative Risk Model • Relative Risk Model • Relative Risk Model • Relative Risk Model
–– Numerical score from algorithm that uses weighting factors on Numerical score from algorithm that uses weighting factors on multiple attributes, based on actual datamultiple attributes, based on actual data
• Probabilistic Model • Probabilistic Model • Probabilistic Model • Probabilistic Model • Probabilistic Model • Probabilistic Model • Probabilistic Model • Probabilistic Model
–– Detailed statistical data about actual attributes used to estimate Detailed statistical data about actual attributes used to estimate absolute riskabsolute risk
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11115555
Identify high consequence areas
HCA’s
Are pipelines located in high consequence areas?
Report this information. Evaluate pipelines periodically for new
high consequence areas.
Identify pipeline threats and perform risk assessments
Conduct baseline assessments, assessing pipelines with the greatest risk first.
Repair or replace any defective pipeline segments.
Perform preventive and mitigative measures.
Reassess pipelines as required.
Risk Mitigation Process for NG PipelinesRisk Mitigation Process for NG PipelinesRisk Mitigation Process for NG PipelinesRisk Mitigation Process for NG Pipelines
NO YES
Direct Assessment : Direct Assessment : Direct Assessment : Direct Assessment : Direct Assessment : Direct Assessment : Direct Assessment : Direct Assessment : Hydro testingHydro testingHydro testingHydro testingHydro testingHydro testingHydro testingHydro testing
All pipelines shall be hydro tested to 1.25 to 1.5 All pipelines shall be hydro tested to 1.25 to 1.5 times of Design Pressure before putting into times of Design Pressure before putting into operations.operations.
Hydro test Planning;Hydro test Planning;
Minimum pressure test requirements are given in the Minimum pressure test requirements are given in the regulations, as well as in industry standards and regulations, as well as in industry standards and recommended practices.recommended practices.
API 1110 “Pressure Testing of Liquid Petroleum API 1110 “Pressure Testing of Liquid Petroleum Pipelines”.Pipelines”.Several threats can be removed by Hydro testing.Several threats can be removed by Hydro testing.
The higher the test pressures the better safety factor.The higher the test pressures the better safety factor.
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11116666
Pipeline Threats Pipeline Threats
Different Threats Different Threats Different Threats Different Threats Different Threats Different Threats Different Threats Different Threats
• External Corrosion
• Internal Corrosion
• Stress Corrosion Cracking (SCC)
Time Dependent
• Manufacturing Related DefectsManufacturing Related DefectsManufacturing Related DefectsManufacturing Related Defects
•Defective pipe seam
•Defective pipe
• Welding/Fabrication RelatedWelding/Fabrication RelatedWelding/Fabrication RelatedWelding/Fabrication Related
•Defective pipe girth weld
•Defective fabrication weld
•Wrinkle bend or buckle
•Stripped threads/broken pipe/coupling failure
• EquipmentEquipmentEquipmentEquipment
•Gasket O-ring failure
•Control/Relief equipment malfunction
•Seal/pump packing failure
•Miscellaneous
Stable
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11117777
Threats…Threats…Threats…Threats…Threats…Threats…Threats…Threats…
Time IndependentTime IndependentTime IndependentTime IndependentTime IndependentTime IndependentTime IndependentTime IndependentThird party / Mechanical damageThird party / Mechanical damage
Damage inflicted by first, second, or third parties Damage inflicted by first, second, or third parties (instantaneous/immediate failure)(instantaneous/immediate failure)
Previously damaged pipe (delayed failure mode)Previously damaged pipe (delayed failure mode)
VandalismVandalism
Incorrect operationsIncorrect operations
Weather related outside forceWeather related outside force
Cold weatherCold weather
LightningLightning
Heavy rains or floodsHeavy rains or floods
Earth MovementsEarth Movements
Mechanical DamagesMechanical DamagesMechanical DamagesMechanical DamagesMechanical DamagesMechanical DamagesMechanical DamagesMechanical Damages--the best defense against threat is the best defense against threat is PreventionPreventionPreventionPreventionPreventionPreventionPreventionPrevention
WorldWorld widewide approxapprox.. 3535%% ofof CrossCross countrycountry pipelinespipelinesincidentsincidents areare causedcaused duedue toto MechanicalMechanical DamagesDamages
IndiaIndia –– “_?_”“_?_”“_?_”“_?_”“_?_”“_?_”“_?_”“_?_” ,, USUS –– 3535%%,, EuropeEurope –– 5050%%
PNGRBPNGRB isis nownow maintainingmaintaining thethe datadata ofof pipelinepipeline failuresfailures..
HeavyHeavy penaltiespenalties bebe imposedimposed onon thethe agenciesagencies whowhodamagedamage thethe pipelinespipelines andand thethe amountamount recoveredrecovered toto bebespendspend forfor trainingtraining thethe serviceservice providersproviders andand alsoalso totoprovideprovide awarenessawareness toto thethe locallocal publicpublic..
If there are two or more ways to do something,
and one of those ways can result in a catastrophe,
then someone will do it…!!!
((((Murphy’s Law of Catastrophe )Murphy’s Law of Catastrophe )Murphy’s Law of Catastrophe )Murphy’s Law of Catastrophe )
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11118888
Steps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline RepairSteps in Pipeline Repair
Restore backfill and reRestore backfill and reRestore backfill and reRestore backfill and re----pressurizepressurizepressurizepressurize
Allow fillers and adhesives to cure per manufacturer’s RecommendationsAllow fillers and adhesives to cure per manufacturer’s RecommendationsAllow fillers and adhesives to cure per manufacturer’s RecommendationsAllow fillers and adhesives to cure per manufacturer’s Recommendations
Install repairInstall repairInstall repairInstall repair
Clean, dress, inspect, and prepare pipe (surface preparation critical)Clean, dress, inspect, and prepare pipe (surface preparation critical)Clean, dress, inspect, and prepare pipe (surface preparation critical)Clean, dress, inspect, and prepare pipe (surface preparation critical)
Calculate required number of composite wraps (see code or manufacturer’s Calculate required number of composite wraps (see code or manufacturer’s Calculate required number of composite wraps (see code or manufacturer’s Calculate required number of composite wraps (see code or manufacturer’s guidelines for respective repair type)guidelines for respective repair type)guidelines for respective repair type)guidelines for respective repair type)
Assess severity of damage (e.g. corrosion, mechanical damage, etc.) and Assess severity of damage (e.g. corrosion, mechanical damage, etc.) and Assess severity of damage (e.g. corrosion, mechanical damage, etc.) and Assess severity of damage (e.g. corrosion, mechanical damage, etc.) and determine if and which repair is possibledetermine if and which repair is possibledetermine if and which repair is possibledetermine if and which repair is possible
Locate damageLocate damageLocate damageLocate damage
DoDoDoDo youyouyouyou knowknowknowknow “what“what“what“what datadatadatadata youyouyouyou wantwantwantwant totototo collectcollectcollectcollect whenwhenwhenwhentheretheretherethere isisisis anyanyanyany excavationexcavationexcavationexcavation onononon BuriedBuriedBuriedBuried PipelinePipelinePipelinePipeline ????????
Yes
You are really You are really You are really You are really LUCKY !!LUCKY !!LUCKY !!LUCKY !!
No
CoatingCoatingCoatingCoating thickness,thickness,thickness,thickness, bondingbondingbondingbonding (peel(peel(peel(peel test),test),test),test), pipepipepipepipe wallwallwallwallthickness,thickness,thickness,thickness, buriedburiedburiedburied conditions,conditions,conditions,conditions, depthdepthdepthdepth ofofofof pipelinepipelinepipelinepipeline....
Do not forget to take a photograph before back fill.Do not forget to take a photograph before back fill.Do not forget to take a photograph before back fill.Do not forget to take a photograph before back fill.
Keep dig sheet ready in futureKeep dig sheet ready in futureKeep dig sheet ready in futureKeep dig sheet ready in future
•Note: Note: Note: Note: Collect as much information as possible whenever you Collect as much information as possible whenever you Collect as much information as possible whenever you Collect as much information as possible whenever you
excavate the pipelineexcavate the pipelineexcavate the pipelineexcavate the pipeline
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 11119999
Do we have competent personnel Do we have competent personnel Do we have competent personnel Do we have competent personnel Do we have competent personnel Do we have competent personnel Do we have competent personnel Do we have competent personnel for assigned task ?for assigned task ?for assigned task ?for assigned task ?for assigned task ?for assigned task ?for assigned task ?for assigned task ?
Personal Qualification for all critical Personal Qualification for all critical activities is very essential…activities is very essential…
(Pl Ref. B31.8Q for personnel qualification)(Pl Ref. B31.8Q for personnel qualification)
What is Competency Matrix…???What is Competency Matrix…???
Why do we need this ???Why do we need this ???
NoteNoteNoteNoteNoteNoteNoteNote:: oneone personperson cancan dodo supervisionsupervision onlyonlyofof “n”“n” numbernumber ofof personnelpersonnel OROROROROROROROR inin aaparticularparticular areaarea
Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.Pipeline Integrity Management Related Web Sites.
www.egig.nl www.egig.nl www.egig.nl www.egig.nl www.egig.nl www.egig.nl www.egig.nl www.egig.nl –––––––– European Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry DatabaseEuropean Gas Industry Database
http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ http://primis.phmsa.dot.gov/comm/ -------- Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration Pipeline & Hazardous Materials Administration
www.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.orgwww.pipelineawareness.org –––––––– Pipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public AwarenessPipeline Association for Public Awareness
www.cga.orgwww.cga.orgwww.cga.orgwww.cga.orgwww.cga.orgwww.cga.orgwww.cga.orgwww.cga.org –––––––– Common Ground AllianceCommon Ground AllianceCommon Ground AllianceCommon Ground AllianceCommon Ground AllianceCommon Ground AllianceCommon Ground AllianceCommon Ground Alliance
www.cgawww.cgawww.cgawww.cgawww.cgawww.cgawww.cgawww.cga--------dirt.orgdirt.orgdirt.orgdirt.orgdirt.orgdirt.orgdirt.orgdirt.org –––––––– Common Ground Alliance Common Ground Alliance Common Ground Alliance Common Ground Alliance Common Ground Alliance Common Ground Alliance Common Ground Alliance Common Ground Alliance –––––––– DIRT ReportsDIRT ReportsDIRT ReportsDIRT ReportsDIRT ReportsDIRT ReportsDIRT ReportsDIRT Reports
http://http://http://http://http://http://http://http://--------api.orgapi.orgapi.orgapi.orgapi.orgapi.orgapi.orgapi.org--------pipelinepipelinepipelinepipelinepipelinepipelinepipelinepipeline--------standards.index standards.index standards.index standards.index standards.index standards.index standards.index standards.index –––––––– American Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute StandardsAmerican Petroleum Institute Standards
http://http://http://http://http://http://http://http://--------cstools.asme.org cstools.asme.org cstools.asme.org cstools.asme.org cstools.asme.org cstools.asme.org cstools.asme.org cstools.asme.org –––––––– ASME Codes & StandardsASME Codes & StandardsASME Codes & StandardsASME Codes & StandardsASME Codes & StandardsASME Codes & StandardsASME Codes & StandardsASME Codes & Standards
http://http://http://http://http://http://http://http://--------primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ primis.phmsa.dot.gov/gasimp/ -------- PHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity ManagementPHMSA Gas Integrity Management
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 22220000
SummarySummary
Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Global experience shows that the Integrity Management program approach has proven in Management program approach has proven in Management program approach has proven in Management program approach has proven in Management program approach has proven in Management program approach has proven in Management program approach has proven in Management program approach has proven in prevention of incidents.prevention of incidents.prevention of incidents.prevention of incidents.prevention of incidents.prevention of incidents.prevention of incidents.prevention of incidents.
The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by The Quality of Pipelines are getting better day by day. day. day. day. day. day. day. day.
By effective By effective By effective By effective By effective By effective By effective By effective implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity implementation of Pipeline Integrity Management System, reduce Management System, reduce Management System, reduce Management System, reduce Management System, reduce Management System, reduce Management System, reduce Management System, reduce the risk of pipeline the risk of pipeline the risk of pipeline the risk of pipeline the risk of pipeline the risk of pipeline the risk of pipeline the risk of pipeline failures.failures.failures.failures.failures.failures.failures.failures.
Question & AnswersQuestion & AnswersQuestion & AnswersQuestion & Answers
you can reach me at you can reach me at you can reach me at you can reach me at [email protected]@[email protected]@gspc.in
© 2004 Microsoft Corporation. All rights reserved.
This presentation is for informational purposes only. Microsoft makes no warranties, express or implied, in this summary. 22221111
Thank you…Jaihind