2. About Assign Assign was founded in 2005 and today is an
expanding consultancy with 70 personnel We work with projects both
onsite at our customers and in our own offices . Our offices are
located in Gothenburg and Trollhttan. Assign is certified to ISO
9001:2008 Medical Technology Sanitary Expanding Off-shore Present
Automotive areas areas Process- / Energy Food Ship Aerospace
Kontakt: Kontakt: www.assign.se [email protected][email protected]
+46 70 422 93 03 + 46 70 598 11 39
3. What we offer and our locations Product Design Design (CAE)
and Calculation Main office in Gothenburg New offices El- /
Electronics - Around Stockholm Manufacturing Engineering - South of
Sweden Production technique Quality Logistics Robots Technical
information Project management We are a selected partner to
University West and PTC (Production Technology Center) in
Trollhttan, where we also have our local office.Our Norwegian
business is run by our daughter company Assign Solutions located in
Oslo. Kontakt: Kontakt: www-assign.se [email protected][email protected] +46 70 422 93 03 070 598 11 39
4. Reference Assignment Product Development SAAB Aerosystems
Gripen NG Assignment in cooperation with Semcon Caran AB Design of
cable harnesses and brackets Design and geometry assurance of
cables and electrical devices Investigation of potential new device
placements and their affects on other systems and aerodynamics etc.
Design tool: Catia V5Gripen NG (Next Generation) Proposed version
with new engine,increased fuel capacity, higher payload, upgraded
avionics andother improvements
5. Reference AssignmentProduct DevelopmentSAAB Aerosystems -
Gripen NG Assignment in cooperation with Semcon Caran AB Assignment
covers: Fuel installation Hydraulics installation Main frame
(HSM-parts, sheet metal) Design tool: Catia V5Gripen NG (Next
Generation) Proposed version with new engine,increased fuel
capacity, higher payload, upgraded avionics andother
improvements
6. Reference Assignment Mechanical Design and Production
Drawings SAAB Aerostructure Project Horizon Assignment in
cooperation with Semcon Caran AB. Redesign of Aircraft SAAB 2000 to
enable installation of radar Erieye. Extension of rear fine.
Modification of existing parts and designing new parts for the fine
structure. Design of new covers and brackets for rocket sensors on
the outer skin of the aircraft.SAAB 2000 with radar Erieye Design
tool: Catia V4
7. Reference AssignmentMechanical Design and Product
DevelopmentSAAB Aerosystems - Skeldar V150 Assignment in
cooperation with Semcon Caran AB Designing complete main frame and
engine frame in aspects of loads and vibrations Packing and
installation of various components Engine Fuel System Cooling
system Avionics Design tool: Catia V5Skeldar V-150 is a lightweight
unmanned helicopter, designed formilitary and commercial
applications
8. Current Reference AssignmentAssign working with CAE at Volvo
Aero We are at engineering level involved in CAE calculation for
products of today as well as for the future.
9. Current Reference AssignmentAssign working with Porsche
Engineering - Working with Porsche Engineering in their pre-study
for new Porsche automobiles. - Packaging and concept design for the
next generation electric vehicles - Design tool. Catia V5
10. Reference AssignmentProduct DevelopmentAutomotive supplier
Front seat structure Development and design of front seat
structures for the next generations passenger cars. Development of
details, specific for customers, for the load-bearing structure (e.
g. chassis side plates), integration of standard components and
coordination of customer interfaces. Kinematic calculations are
used to assure the design in the complete adjustment area. Design
tool: Catia V5, Kontakt: Kontakt: www-assign.se [email protected][email protected] +46 70 422 93 03 070 598 11 39
11. Current Reference AssignmentAssign working with the future
at VCC Chassis Development and design of Chassis components for the
next generations passenger cars at VCC. Responsible at a component
engineering level to co-ordinate the design / development,cost and
timing of the next generation Chassis platform Plus ensuring
quality is maintained thoughtout the process. Kontakt: Kontakt:
www-assign.se [email protected][email protected] +46 70 422 93 03
070 598 11 39
12. Current Reference AssignmentAssign working with the new V40
at VCC - Overall software responsibility of Central Electronics
Module - Covering basic and advanced Body and Security Electronics
functionality - Developing the Gateway of the LIN and CAN networks
- Software strategy, planning and implementation jointly with HW/SW
supplier Kontakt: Kontakt: www-assign.se [email protected][email protected] +46 70 422 93 03 070 598 11 39
13. Current Reference AssignmentAssign working with the future
V40 at VCC - Studio Engineering - Covering all aspects of the
vehicle based in the design Dept. - Working with the Designer as an
aid for Engineering input. - Making sure the end product is as
close to the Designers vision as possible. - Working tool: Catia
V5, TCE Kontakt: Kontakt: www-assign.se [email protected][email protected] +46 70 422 93 03 070 598 11 39
14. Current Reference AssignmentAssign working with the new
Volvo Truck - Responsibility for the cooling package, expansion
tank and radiator bug screen - Developing new components for the
next truck generation -Covering design of sheet metal and plastic
parts. - Design tool. Pro-engineer Kontakt: Kontakt: www-assign.se
[email protected][email protected] +46 70 422 93 03 070 598 11
39
15. Assigns goal for 2012 Building on our past and boosting
Assigns aviation portfolioof clients, assignments and competence
using our substantialglobal network of contacts via professional
social networking and also via more traditional means. From there
to maintain and support our clients and assigned competence.
Kontakt: Kontakt: www-assign.se [email protected][email protected]
+46 70 422 93 03 070 598 11 39
16. A selection of our customers and partners plus companies
where we currently carry out assignmentsWe are currently in
discussion with Kontaktuppgifter Referensuppdrag Kontakt: Kontakt:
www-assign.se [email protected][email protected] +46 70 422 93 03
070 598 11 39