Presentation Schedule Presentation Schedule
Introduction Student info Sensor info Device info Communication RoboAL3 RoboAL4 References
Revised Sept.21 2010
02:39 PM 1
IntroductionIntroductionExperiences
Started to working for University of Ottawa in 1986 15 years with University of Ottawa Haz- Mat Team 10 years with Clarence-Rockland Fire Dept.
02:39 PM 2
Student info.Student info. % of lab marks can be deducted if rules and regulation are
not followed ex: by not cleaning up your bench or sliding your chairs
back underneath bench top.
Students are responsible for their own extra parts ex: if you want to add a sensor or device that the dept. doesn’t have you are responsible for the purchase and delivery of that part, on rare occasion did the school purchase those parts.
Back packs off bench tops TA’s will have student # based on station # Important issue regarding the design of a new project is to
do a current analysis before the start of your design
02:39 PM 3
Setup a leader among your team so that you are better organized.
Do not wait before starting your project, start now !
Prepare yourself before coming to the lab.
It doesn’t work ! Ask yourself if it is software or hardware, use the scope to trouble shoot your problems.
Fuses keeps on blowing, do not replace with lager one.
Do not cut any servo, battery and other device connectors. If you must please come and see me first.
No design must exceed 50 volts, ex: do not work with 120 volts AC.
I can give you what I have regarding metal, wood and plastic recycled pieces and do some cuts or holes with my band saw and drill press for you.
PLEASE DO NOT ask to barrow my own personal tools. If you need to do a task with a special tool that I have then I shall do it for you. You can purchase inexpensive tools from Dollar store
02:39 PM 4
Work station setupWork station setup
02:39 PM 5
High power class I Blue ToothHigh power class I Blue Tooth
TRENDnet TBW-102UBUser manual at http://www.trendnet.com/en/products/TBW-102UB.htm
02:39 PM 6
Proper instrumentation settingsProper instrumentation settingsOscilloscope
02:39 PM 7
Power supplyPower supply
02:39 PM 8
Soldering stationSoldering station
02:39 PM 9
Spot WelderSpot Welder
02:39 PM 10
3 in 1 Metal Forming Machine3 in 1 Metal Forming Machine
02:39 PM 11
Metal TransformationMetal Transformation
02:39 PM 12
SensorsSensorsSonar Polaroid 6500 (Long Range) www.acroname.com
Uses TOF (time of flight) technology Accurate range 15 cm – 10 m Function is to bring high the “init” signal (ping) and then measure the elapsed time
until TOF, “echo” signal goes high The “echo” output is an open collector therefore use 4.7 K pull up resistor between the
output “echo” and Vcc. May require a 1000 micro farad electrolytic Cap at 50 Volts Install a 0.1 micro farad capacitor in C7 on the board a must have Caution ! 200 Volts p-p on transducer leads
02:39 PM 13
Ultrasonic Ranger SRF04 (Mid Range) www.acroname.com
Also uses TOF Range is 3 cm- 3 m Logic lines used to trigger the pulse and echo Compact, perfect for robot applications
02:39 PM 14
Sharp GP2D02 IR (Short Range) www.acroname.com
Uses triangulation theory for output results Range 10 cm – 80 cm 8 bit serial output Has a position sensitive detector (PSD) Wiring identification Vout: yellow, Vcc: Red, Vin: Green , Gnd: Black Use diode 1N914 Vin: anode, output: cathode to FPG/HC12 etc.
02:39 PM 15
Single Chip Rate GyroSingle Chip Rate Gyro
Used extensively to sense angular rate or rate of rotation. Plus or minus 300 degrees per second Analog device www.analog.com
ADXRS300EBADXRS300EB
02:39 PM 16
Vti sca1000 accelerometerVti sca1000 accelerometer 2-axis measurement; X-Y measurement and Z-Y measurement Measuring range ±1.7g,±4g Interchangeable with SCA610/620 SPI compatible digital output Internal temperature sensor, accessible via SPI Qualified according to AEC Q-100
02:39 PM 17
Devantech Digital Compass www.acroname.com
3-4 degrees of accuracy Output PWM (1 ms to 37 ms) Uses Philips KMZ51 magnetic field sensor Wiring identification Pin0:Gnd, Pin1:5v, Pin4: PWM output
02:39 PM 18
Optic Sensor TRA-01 (line tracker)
• Sensor type = Reflective IR • IR sensor = Combined IR LED and detector • I/O required = Three digital lines (inputs) • Minimum range = Almost touching the floor • Maximum range = 1/2" from floor • Input voltage = 5vdc regulated • Current requirements = 50-65mA • PC board size = 2.3" x .75"
02:39 PM 19
Temperature sensor (Newark part # 50F7748)
4.7 k ohms at room temperature Sensitive to the touch
+5 Voltage regulators
T0220 package rated at 1 amp Pin1: input, Pin2:Gnd
Pin3:output
T03 package rated at 3 amps
02:39 PM 20
Hamamastu P5587 Photo reflector
Fast TTL output Miniature package Only 12 mA, current draw
Incremental wheel encoders
• 64 increments
• 5.6 degrees per increments
• self adhesive
• 3.3 cm in diameter
02:39 PM 21
DevicesDevicesFutaba FP-S148 Servo Motors
Uses PWM Freq. is 33 Hz Range limits 2.2 ms – 0.8 ms with a stop time of 1.26 ms on average 42 oz-in of torque Voltage input 4 – 8 Vdc Wiring identification Vcc: red, Control: white, Gnd: black Note: Do not exceed 33 Hz motor will be damaged as a result !
02:39 PM 22
CommunicationCommunication
Blue tooth class II (MCB3100) www.drrobot.com
• Class 2 Bluetooth compatible • On-board communication stack• Effective range: 15 meters indoor, 45 meters outdoor • Support UART data rate: 921.6/460.8/115.2kbps
Serial interface MCR3210P
•1 M bits/sec data rate •RTS/CTS handshaking •Single 3.3 V power supply •9-pin DSUB connector as DTE
02:39 PM 23
Blue Tooth class I MCB3101 www.drrobot.com
Output Interface UART Compliant Bluetooth Specification v1.1 Transmission Power Class 1 (max 18dBm) Receiving Signal Range -84 to -20dBm Effective range: 120 meters (Default Antenna)
02:39 PM 24
The ZeroG 802.11 PICtail Plus Daughter Board is a demonstration board for evaluating Wi-Fi connectivity using PIC microcontrollers and the ZeroG ZG2100M module. This product is compatible with the Explorer 16 Development Board and other Microchip development platforms with the PICtail/PICtail Plus connector
02:39 PM 25
PerformanceIndoor/Urban range: Up to 100 ft (30 m)
Outdoor/RF line-of-sight range: up to 300 ft (100 m) RF data rate: 250 Kbps
Interface data rate: Up to 115.2 Kbps Operating frequency: 2.4 GHz Receiver sensitivity: -92 dBm
PowerSupply voltage: 2.8 - 3.4 V
Transmit current: 45 mA (@ 3.3 V) Receive current: 50 mA (@ 3.3 V) Power-down sleep current: <10 µA
General Frequency band: 2.4000 - 2.4835 GHz
Serial data interface: 3V CMOS UART - No configuration required
Physical Properties Size: 0.960 in x 1.087 in (2.438 cm x 2.761 cm)
Weight: 0.10 oz (3g) - w/ U.FL. connector
XBee Starter kit XB24-DKSXBee Starter kit XB24-DKS
http://www.digi.com/products/wireless/point-multipoint/xbee-series1-module.jsp02:39 PM 26
Devantech SP03 Speech Synthesizer module www.acroname.com
Serial interface Built in speaker Stores up to 30 phrases (up to 1925 characters total) PIC processor for easy communication Winbond WTS701 speech chip I2C bus interface and parallel interface (I2C: 2 wire bi-directional serial bus)
02:39 PM 27
RFID Reader & ProgrammerRFID Reader & Programmer
Read/write ISO15693 RFID Tags Read ISO14443A RFID Tags Operates at 13.25MHz Anti-collision, continuous read and Quiet features Serial port connection to PC. Suitable for use with USB adapters Power requirements: 6-9VDC PSU with barrel connector or 5V direct
input Antenna detector to detect RF signal strength API software for easy integration with your own programs VB.net Project example Extensive Documentation on CD
http://www.kanda.com
02:39 PM 28
Altera FPGA DE2 interfacesAltera FPGA DE2 interfaces
LCD display Terasic TRDB-LCM Camera Terasic TRDB-DC2
http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=39&No=5002:39 PM 29
CMUCam2CMUCam2
02:39 PM 30
CMUCAM2-CMUCAM2+ CAMERA www.seattlerobotics.com
Track user defined color blobs at up to 50 fps Track motion using frame differencing at 26 fps Find the centroid of any tracking data Gather mean color and variance data Gather a 28 bin histogram of each color channel Manipulate horizontal pixel differenced images Arbitrary image windowing Adjust the camera’s image properties Dump a raw image Up to 160 X 255 resolution Support multiple baud rates Control 5 servos outputs Slave parallel image processing mode off of single camera bus Automatically use servos to do two axis color tracking B/W analog video output (Pal or NTSC) Flexible output packet customization Multiple pass image processing on a buffered image02:39 PM 31
02:39 PM 32
Altera Cyclone boardAltera Cyclone board Nios embedded processor Cyclone EP1C20 device 10/100 Ethernet on board CompactFlash Two UART Connectors 1 Mbyte SRAM, 16 Mbyte SDRAM, 8 Mbyte Flash Memory Quartus II Design software with SOPC builder
02:39 PM 33
Altera DE2Altera DE2 Altera Cyclone II (2C35) FPGA with 35,000 LE’s 16 Mbite serial configuration device Built-in USB Blaster TV Decoder for NTSC/PAL Multiformat system 24 bit CD quality Audio CODEC VGA DAC (10 bit DAC) USB Host and Device Ethernet 10/100 Mbps SRAM,SDRAM,Flash,SD Card connector RS-232, IrDA,PS/2 16X2 LCD Panel
02:39 PM 34
Motorola Adapt9S12DP256 Motorola Adapt9S12DP256 Microcontroller boardMicrocontroller board
Two 50 pin connectors bring out all I/O pins of the MCU RS-232 transceiver provide for both SCI channels 16 Mhz crystal, but internal bus can run up to 24 Mhz Accommodates optional user supplied oscillator Back ground debug Mode Program in C, Basic, and Assembler, etc..
02:39 PM 35
Features• Includes PIC24FJ128GA010 and the dsPIC33FJ256GP710 DSC DigitalSignal Controller PIMs (100-pin version) or the PIC24FJ64GA004 PIM (44-pin version).• Alpha-numeric 16 x 2 LCD display• Interfaces to MPLAB ICD 2, MPLAB REAL ICE, USB, and RS-232• Includes Microchip's TC1047A high accuracy, analog output temperature sensor• Expansion connector to access full devices pin-out and bread board prototyping area
Microchip Explorer 16 Development Board
02:39 PM 36
MICROCHIP PICkit MICROCHIP PICkit microcontrollermicrocontroller
Easy low cost way to start development Uses selected Flash-base PIC microcontrollers MPLAB IDE Software USB interface www.microchip.com
02:39 PM 37
New New
Overview
The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 (datasheet) or ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable .
Arduino Duemilanove
02:39 PM 38
Summary
Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA (do not exceed)
DC Current for 3.3V Pin 50 mA (do not exceed)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
• Provides Wi-Fi connectivity to your Arduino-based project• Uses SPI for host communication (max speed 25MHz)• 16Mbit serial flash for storing web pages and other data• External antenna
WiFi shield
02:39 PM 39
Apple Iphone 3G 16 Gig
Apple IMac 20”
New tools
02:39 PM 40
RoboAl3RoboAl3
02:39 PM 41
RoboAl3 FeaturesRoboAl3 Features Altera’s Cyclone board (EP1C20) with LCD display Cmucam 2+ with pan and tilt turret Powerful solenoid, shoot puck 2 feet an average with aprox. 200 shots
note: do not leave plunger out, it will damage the internal coil Differential steering using two servo motors, Futaba FP-S148 Powered by 2 NiCad 1700 mA/h batteries and AC adaptor controlled
by selector switch. Dual in lab battery chargers.note: you can charge both batteries at the same time while still mount underneath robot
New photo reflector circuit, using Hamamastu photo reflector P5587 with wheel incremental encoders (64 increments for 360 degrees therefore 5.6 degrees per increments
Two prototyping bread boards 2 X 6.5 inches Front puck holding guide Female board mount sockets, use 22 gauge solid wire only. Powerful 3000 mA regulator Blue tooth class II MCB3100 with serial interface MCR3210P02:39 PM 42
02:39 PM 43
RoboAl4RoboAl4
02:39 PM 44
Roboal4 FeaturesRoboal4 Features
Altera’s Cyclone board (EP1C20) with LCD display Cmucam 2 with pan and tilt turret Differential steering using two servo motors, Futaba FP-S148 Powered by 2 NiCad 1700 mA/h batteries and AC adaptor controlled
by selector switch. Dual in lab battery chargers.note: you can charge both batteries at the same time while still mount underneath robot
New photo reflector circuit, using Hamamastu photo reflector P5587 with wheel incremental encoders (64 increments for 360 degrees therefore 5.6 degrees per increments
Two prototyping bread boards 2 X 6.5 inches Female board mount sockets, use 22 gauge solid wire only. Powerful 3000 mA regulator Blue tooth class II MCB3100 with serial interface MCR3210P
02:39 PM 45
02:39 PM 46
Project group photo’sProject group photo’s
02:39 PM 47
Robot projectsRobot projects
02:39 PM 48
Entrepreneurship and Entrepreneurship and Innovation Endowment FundInnovation Endowment FundUniversity of Ottawa - Faculty University of Ottawa - Faculty
of Engineeringof Engineering
http://www.eng.uottawa.ca/eng/eief/index.php
02:39 PM 49
ReferencesReferences
Photo’s ,Text and Schematics Information
www.acroname.com www.lynxmotion.com www.drrobot.com www.analog.com www.microchip.com www.vti.com www.technologicalarts.com
Presentation version: Jan 12 2010
02:39 PM 50