PRODUCT
CATALOGUE
Contents page
Shackles 1-7
Grade 8 Chain & Components 8-9
Grade 10 Chain & Components 10-11
Building a Chain Sling 12
Wire Rope Slings & Fittings 13-15
Polyester Slings 16 -18
Ratchet Restraints & Loadbinders 19-20
Eyebolts & Eyenuts 21-25
Lifting Eyes & Lifting Points 26-27
Manhole Lifting Pins 28
Harnesses 29-30
Lanyards & Connectors 31-32
Chain Blocks 33
Lever Hoists 34
Miscellaneous 35
Hire of Test Weights 36-37
Inspection & Load Testing 38
Certification 39-40
Material Body and pin high tensile steel, Grade 6, quenched and tempered
Safety factor MBL equals 6 x WLL
Standard EN13889
Finish Hot dipped galvanised
Temp range Minus 20 up to 200
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Bow Dia
Pin Dia
Eye Dia
Width Eye
Width Inside
Length Inside
Width Bow
Length Length Bow
Width Bow
Weight Each
Tonnes
a mm
b mm
c mm
d mm
e mm
f mm
g mm
h mm
i mm
j mm
Kg
0.33 5 6 12 5 9.5 22 16 36 29.5 26 0.02
0.5 7 8 16.5 7 12 29 20 48.5 38 34 0.05
0.75 9 10 20 9 13.5 32 22 56 46.5 40 0.10
1 10 11 22.5 10 17 36.5 26 63.5 54 46 0.14
1.5 11 13 26.5 11 19 43 29 74 59.5 51 0.19
2 13.5 16 34 13 22 51 32 89 73 58 0.36
3.25 16 19 40 16 27 64 43 110 89 75 0.63
4.75 19 22 46 19 31 76 51 129 103 89 1.01
6.5 22 25 52 22 36 83 58 144 119 102 1.50
8.5 25 28 59 25 43 95 68 164 137 118 2.21
9.5 28 32 66 28 47 108 75 185 153 131 3.16
12 32 35 72 32 51 115 83 201 170 147 4.31
3.5 35 38 80 35 57 133 92 227 186 162 5.55
17 38 42 88 38 60 146 99 249 203 175 7.43
25 45 50 103 45 74 178 126 300 243 216 12.84
Green pin standard Bow shackles g-4161
With screw collar pin
Page 1
Material Body and pin high tensile steel, Grade 6, quenched and tempered
Safety factor MBL equals 6 x WLL
Standard EN13889
Finish Hot dipped galvanised
Temp range Minus 20 up to 200
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Bow Dia
Pin Dia
Eye Dia
Width Eye
Width Inside
Length Inside
Length Length Bolt
Weight Each
Tonnes
a mm
b mm
c mm
d mm
e mm
f mm
g mm
h mm
Kg
0.33 5 6 12 5 9.5 19 33 29.5 0.02
0.5 7 8 16.5 7 12 22 41.5 38 0.05
0.75 9 10 20 9 13.5 26 50 46.5 0.09
1 10 11 22.5 10 17 32 59 54 0.14
1.5 11 13 26.5 11 19 37 68 59.5 0.19
2 13.5 16 34 13 22 43 81 73 0.32
3.25 16 19 40 16 27 51 97 89 0.54
4.75 19 22 46 19 31 59 112 103 0.87
6.5 22 25 52 22 36 73 134 119 1.34
8.5 25 28 59 25 43 85 154 137 2.08
9.5 28 32 66 28 47 90 167 153 2.77
12 32 35 72 32 51 94 180 170 3.72
3.5 35 38 80 35 57 115 209 186 5.14
17 38 42 88 38 60 127 230 203 6.85
25 45 50 103 45 74 149 271 243 11.45
Green pin standard dee shackles g-4161
With screw collar pin
Page 2
Material Body and pin high tensile steel, Grade 6, quenched and tempered
Safety factor MBL equals 6 x WLL
Standard EN13889
Finish Hot dipped galvanised
Temp range Minus 20 up to 200
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Bow Dia
Pin Dia
Eye Dia
Width Eye
Width Inside
Length Inside
Width Bow
Length Length Bolt
Width Bow
Width Weight Each
Tonnes
a mm
b mm
c mm
d mm
e mm
f mm
g mm
h mm
i mm
j mm
k mm
Kg
0.5 7 8 16.5 7 12 29 20 48.5 42 34 4 0.06
0.75 9 10 20 9 13.5 32 22 56 50 40 5 0.11
1 10 11 22.5 10 17 36.5 26 63.5 60 45 8 0.16
1.5 11 13 26.5 11 19 43 29 74 67 51 11 0.22
2 13.5 16 34 13.5 22 51 32 89 82 58 13 0.42
3.25 16 19 40 16 27 64 43 110 98 75 17 0.74
4.75 19 22 46 19 31 76 51 129 114 89 19 1.18
6.5 22 25 52 22 36 83 58 144 130 102 22 1.77
8.5 25 28 59 25 43 95 68 164 150 118 25 2.58
9.5 28 32 66 28 47 108 75 185 166 131 27 3.66
12 32 35 72 32 51 115 83 201 178 147 30 4.91
13.5 35 38 80 35 57 133 92 227 197 162 33 6.54
17 38 42 88 38 60 146 99 249 202 175 19 8.19
25 45 50 103 45 74 178 126 300 249 216 23 14.22
35 50 57 111 50 83 197 138 331 269 238 26 19.85
Green pin standard Bow shackles g-4163
With safety Bolt
Page 3
Material Body and pin high tensile steel, Grade 6, quenched and tempered
Safety factor MBL equals 6 x WLL
Standard EN13889
Finish Hot dipped galvanised
Temp range Minus 20 up to 200
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request..
Working Load Limit
Bow Dia
Pin Dia
Eye Dia
Width Eye
Width Inside
Length Inside
Length Length Bolt
Width Nut
Weight Each
Tonnes
a mm
b mm
c mm
d mm
e mm
f mm
g mm
H mm
i mm
Kg
2 13.5 16 34 13 22 43 81 82 13 0.39
3.25 16 19 40 16 27 51 97 98 17 0.67
4.75 19 22 46 19 31 59 112 114 19 1.08
6.5 22 25 52 22 36 73 134 130 22 1.66
8.5 25 28 59 25 43 85 154 150 25 2.46
9.5 28 32 66 28 47 90 167 166 27 3.40
12 32 35 72 32 51 94 180 178 30 4.50
13.5 35 38 80 35 57 115 209 197 33 6.10
17 38 42 88 38 60 127 230 202 19 7.63
25 45 50 103 45 74 149 271 249 23 13.25
35 50 57 111 50 83 171 305 269 26 18.53
Green pin standard dee shackles g-4163
With SAFETY BOLT
Page 4
Material Body and pin, EN14 or equal
Safety factor MBL equals 5 x WLL
Standard BS 3032
Finish Hot dipped galvanised
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Bow Dia Pin Dia Eye Dia Width Inside
Length Inside
Width Bow
Weight Each
Tons
a mm
b mm
c mm
d mm
e mm
f mm
Kg
0.15 1/4 3/8 3/4 1/2 1.1/8 3/4 0.08
0.45 3/8 1/2 1 5/8 1.5/8 1 0.18
0.75 1/2 5/8 1.1/4 7/8 2.1/8 1.1/4 0.34
1.25 5/8 3/4 1.1/2 1.1/8 2.3/4 1.5/8 0.65
2.00 3/4 7/8 1.3/4 1.3/8 3.3/8 2 1.08
2.75 7/8 1 2 1.5/8 3.7/8 2.1/4 1.80
3.75 1 1.1/8 2.1/4 1.3/4 4.1/4 2.1/2 2.46
4.75 1.1/8 1.1/4 2.1/2 2 4.7/8 2.7/8 3.47
5.75 1.1/4 1.3/8 2.3/4 2.1/4 5.3/8 3.1/4 4.56
7.25 1.3/8 1.1/2 3 2.1/2 6 3.1/2 6.07
8.5 1.1/2 1.3/4 3.1/2 2.3/4 6.5/8 3.78 8.35
Large BOW shackle
With type a screw collar pin
Page 5
Material Body and pin, EN14 or equal
Safety factor MBL equals 5 x WLL
Standard BS 3032
Finish Hot dipped galvanised
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Bow Dia Pin Dia Eye Dia Width Inside
Length Inside
Weight Each
Tons
a mm
b mm
c mm
d mm
e mm
Kg
0.25 1/4 3/8 3/4 1/2 1 0.06
0.50 3/8 1/2 1 3/4 1.1/2 0.16
0.75 1/2 5/8 1.1/4 1.1/8 2.1/8 0.35
1.50 5/8 3/4 1.1/2 1.1/4 2.1/2 0.63
2.00 3/4 7/8 1.3/4 1.1/2 2.7/8 1.00
3.00 7/8 1 2 1.3/4 3.1/4 1.54
3.75 1 1.1/8 2.1/4 2 3.3/4 2.21
5.00 1.1/8 1.1/4 2.1/2 2.1/8 4.1/4 3.11
6.00 1.1/4 1.3/8 2.3/4 2.3/8 4.1/2 4.33
7.00 1.3/8 1.1/2 3 2.5/8 5 5.33
9.50 1.1/2 1.3/4 3.1/2 2.3/4 5.3/8 8.46
Large DEE shackle
With type a screw collar pin
Page 6
Additional shackles
Information on request
Small
Shackles
Piling
Shackles
Mooring
Shackles
Big mouth
Shackles
fishing
Shackles
Commercial
Shackles
Stainless steel
Shackles
Blue pin
Shackles
DIN
Shackles
Can’t see what you’re looking for? Contact
us, we’d Be more than happy to help!
Page 7
Material Alloy steel
Standard EN818-2
Heat treatment Quenched and tempered
Surface treatment Painted black
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
d
P
W1
Working Load Limit
Manufact Proof Force
Breaking Force
Weight
mm mm mm tonnes kN kN Kgs
6 18 8.5 1.1 28.3 45.2 0.8
7 21 10 1.5 38.5 62 1.1
8 24 11 2.0 50.3 80.6 1.4
10 30 14 3.2 78.5 130 2.2
13 39 18 5.4 133 214 3.7
16 48 22 8.0 201 322 5.6
19 57 26 11.6 284 457 7.8
22 66 30 15.5 380 610 10.5
Working
load
limits
Tonnes
Chain Dia mm
Single Leg Sling
2-Leg Sling 0-45°
2-Leg Sling 45-60°
3-Leg Sling 0-45°
3-Leg Sling 45-60°
4-Leg Sling 0-45°
4 Leg-Sling 45-60°
6 1.12 1.60 1.12 2.36 1.70 2.36 1.70
7 1.50 2.12 1.50 3.15 2.24 3.15 2.24
8 2.00 2.80 2.00 4.25 3.00 4.25 3.00
10 3.12 4.25 3.15 6.70 4.75 6.70 4.75
13 5.30 7.50 5.30 11.20 8.00 11.20 8.00
16 8.00 11.20 8.00 17.00 11.80 17.00 11.80
19 11.20 16.00 11.20 23.60 17.00 23.60 17.00
22 15.00 21.20 15.00 31.50 22.40 31.50 22.40
Classic grade 8 chain
Short link chain
Page 8
Classic grade 8 components
Larger sizes availaBle upon request
MF Masterlink
Dia mm WLL tonnes
7/8 2.50
10 4.0
13 7.50
16 10.0
G Coupling Link
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
Clevis BKG Safety Hook
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
Eyed EKN Latch Hook
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
MT Masterlink
Dia mm WLL tonnes
7/8 5.2
10 11.5
13 17.0
16 28.0
BL Chain Coupler
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
Clevis EGKN Latch Hook
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
OG Grab Hook (Shortening Clutch)
Dia mm WLL tonnes
7/8 2.0
10 3.2
13 5.4
16 8.2
Page 9
Material Alloy steel
Heat treatment Quenched and tempered – maximum service temperature is 200°
Surface treatment Painted blue
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
d
P
W1
Working Load Limit
Manufact Proof Force
Breaking Force
Weight
mm mm mm tonnes kN kN Kgs
6 18 8 1.5 35.4 56.5 0.8
7 21 10 2.0 48 77 1.1
8 24 11 2.5 63 102 1.4
10 30 14 4.0 98 158 2.3
13 39 18 6.7 166 268 3.8
16 48 22 10.0 251 402 5.6
20 60 29 16.0 393 630 9.4
22 66 31 20.0 491 785 11.8
Working
load
limits
Tonnes
Chain Dia mm
Single Leg Sling
2-Leg Sling 0-45°
2-Leg Sling 45-60°
3-Leg Sling 0-45°
3-Leg Sling 45-60°
4-Leg Sling 0-45°
4 Leg-Sling 45-60°
6 1.50 2.10 1.50 3.10 2.20 3.10 2.20
7 1.95 2.70 1.95 4.00 2.90 4.00 2.90
8 2.50 3.50 2.50 5.20 3.70 5.20 3.70
10 4.00 5.60 4.00 8.40 6.00 8.40 6.00
13 6.70 9.50 6.80 14.20 10.20 14.20 10.20
16 10.00 14.10 10.00 21.00 15.00 21.00 15.00
20 16.00 22.50 16.00 33.60 24.00 33.60 24.00
22 20.00 28.20 20.00 42.00 30.00 42.00 30.00
graBiq grade 10 chain
Short link chain
Page 10
graBiq grade 10 components
Larger sizes availaBle upon request
MF Masterlink
Dia mm WLL tonnes
7/8 2.50
10 4.0
13 7.50
16 10.0
G Coupling Link
Dia mm WLL tonnes
7 2.0
8 2.6
10 4.0
13 6.8
16 10.3
Clevis BKG Safety Hook
Dia mm WLL tonnes
7 2.0
8 2.6
10 4.0
13 6.8
16 10.3
Swivel LKN Latch Hook
Dia mm WLL tonnes
7/8 2.6
10 4.0
13 6.8
16 10.3
Swivel BKL Safety Hook
Dia mm WLL tonnes
7/8 2.6
10 4.0
13 6.8
16 10.3
MT Masterlink
Dia mm WLL tonnes
7/8 5.2
10 11.5
13 17.0
16 28.0
OG Grab Hook (Shortening Clutch) Dia mm WLL tonnes
7 2.0
8 2.6
10 4.0
13 6.8
16 10.3
Clevis EGKN Latch Hook
Dia mm WLL tonnes
7 2.0
8 2.6
10 4.0
13 6.8
16 10.3
Ball Bearing LKNK Swivel Latch Hook
Dia mm WLL tonnes
7/8 2.6
10 4.0
13 6.8
16 10.3
Ball Bearing BKLK Swivel Latch Hook Dia mm WLL tonnes
7/8 2.6
10 4.0
13 6.8
16 10.3
Page 11
Building a Chain Sling
All of our chains are made to order
Page 12
Step 1 – How many legs ?
Have a think about what weight you are lifting and what angle you
will be lifting at. This will help you determine how many legs you will
need.
STEP 2 – WHAT Diameter OF CHAIN ?
The weight you are lifting will determine which diameter of chain
you need. Refer to our working load limit charts on pages 8 & 10.
Step 3 – What length ?
Work out what length of chain you need – there is also the option to
add shortening clutches. Shortening clutches will allow you to
shorten the overall length of your chain.
Step 4 – End Termination
What you are lifting will determine which end termination you need.
Refer to our components on pages 9 & 11.
Working
load
limits
Tonnes
Wire Dia mm
Single Leg Sling 2-Leg Sling 0-45
3-Leg Sling 0-45°
4-Leg Sling 0-45°
Wire Core Fibre Core Wire Core Fibre Core Wire Core Fibre Core Wire Core Fibre Core
8 0.82 0.76 1.1 1.0 1.7 1.6 1.7 1.6
10 1.3 1.2 1.8 1.7 2.7 2.5 2.7 2.5
13 2.1 2.0 2.9 2.8 4.4 4.2 4.4 4.2
16 3.3 3.0 4.6 4.2 6.9 6.3 6.9 6.3
19 4.6 4.3 6.4 6.0 9.6 9.0 9.6 9.0
22 6.2 5.7 8.7 8.0 13.0 11.9 13.0 11.9
24 7.4 6.8 10.3 9.5 15.5 14.3 15.5 14.3
28 10.0 9.3 14.0 13.0 21.0 19.5 21.0 19.5
32 13.1 12.1 18.3 16.9 27.5 25.4 27.5 25.4
36 16.6 15.4 23.2 21.5 34.8 32.3 34.8 32.3
Breaking
Loads
6 x 19
FIBre
core
Approx
Mass
1770 tensile grade
1960 tensile grade
Min
Breaking
LOad
Min
Breaking
Force
Min
Breaking
load
Min
Breaking
force
Wire Dia mm
Kgs/100m Tonnes kN Tonnes kN
3 3.11 0.50 4.89 - -
4 5.54 0.89 8.69 - -
5 8.65 1.39 13.60 - -
6 12.50 2.00 19.60 - -
8 23.0 3.81 37.4 4.22 41.4
10 35.9 5.95 58.4 6.60 64.7
13 60.7 10.10 98.7 11.10 109.0
16 91.9 15.30 150.0 16.90 166.0
19 130.0 21.50 211.0 23.80 233.0
22 174.0 28.80 283.0 31.90 313.0
28 281.0 46.70 458.0 51.70 507.0
32 368.0 61.00 598.0 67.50 662.0
35 440.0 73.00 716.0 80.80 792.0
Wire rope slings
All of our wires are made to order
Page 13
Wire rope sling terminations
Soft eye Hard eye
Standard
thimBle
solid
thimBle
Open conical
Socket
Closed conical
socket
Wedge sockets
Page 14
Chain sling components (hooks etc) and
shackles can Be used for terminations on
wire rope slings
Commercial
Dia Wire Rope
Dia
a
Length Bow
b
Width Inside
c
Length Thread
d
Length Base
e
Thickness Base
f
Height Base
g
mm mm mm mm mm mm mm mm
5 5 25 12 14 25 13 13
6.5 6 32 14 17 30 16 14
8 8 41 18 20 39 20 18
10 8 46 20 24 40 20 21
12 10 56 24 28 50 25 24
13 12 64 29 29 55 28 29
14 12 66 28 31 59 30 28
16 14 76 34 35 64 32 35
19 14 83 37 36 68 33 40
22 16 96 41 40 74 34 44
26 20 111 46 50 84 38 51
Wire rope grips
(Bulldog grips)
Dia Wire Rope
Dia
a
Length Bow
b
Width Inside
c
Length Thread
d
Length Base
e
Thickness Base
f
Height Base
g
mm mm mm mm mm mm mm mm
3 4 20 9 12 21 10 10
5 5 24 11 13 23 11 10
6 5 28 13 15 26 12 11
8 6 34 16 19 30 14 15
10 8 42 19 22 34 18 17
11 8 44 20 22 36 19 18
13 10 55 24 30 42 23 21
14 10 57 25 30 44 23 22
16 12 63 29 33 50 26 26
19 12 75 32 38 54 29 30
22 14 85 37 44 61 33 34
Commercial
DIN
Heavy duty
Correct way of using
grips
safe
Incorrect way of using
grips
Unsafe
Page 15
Material 100% polyester fibre
Standard EN1492-1:2000
Safety factor 7:1
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
simplex
duplex
Width Mm
Width mm
Colour Vertical SWL tones
Chocker SWL tones
Basket 0° SWL tones
Basket 45° SWL tones
Basket 90° SWL tones
Basket 120° SWL tones
50 30 1.00 0.80 2.00 1.80 1.40 1.00
100 60 2.00 1.60 4.00 3.60 2.80 2.00
150 90 3.00 2.40 6.00 5.40 4.20 3.00
200 120 4.00 3.20 8.00 7.20 5.60 4.00
250 150 5.00 4.00 10.00 9.00 7.00 5.00
300 180 6.00 4.80 12.00 10.80 8.40 6.00
- 240 8.00 6.40 16.00 14.40 11.20 8.00
- 300 10.00 8.00 20.00 18.00 14.00 10.00
- 300 12.00 9.60 24.00 21.60 16.80 12.00
WeB Belt slings
Larger sizes availaBle upon request
Simplex Duplex
Page 16
Material 100% polyester fibre
Standard EN1492-1:2000
Safety factor 7:1
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Endless
Roundsling
Width mm
Colour Vertical SWL tones
Chocker SWL tones
Basket 0° SWL tones
Basket 45° SWL tones
Basket 90° SWL tones
Basket 120° SWL tones
30 1.00 0.80 2.00 1.80 1.40 1.00
60 2.00 1.60 4.00 3.60 2.80 2.00
90 3.00 2.40 6.00 5.40 4.20 3.00
120 4.00 3.20 8.00 7.20 5.60 4.00
150 5.00 4.00 10.00 9.00 7.00 5.00
180 6.00 4.80 12.00 10.80 8.40 6.00
240 8.00 6.40 16.00 14.40 11.20 8.00
300 10.00 8.00 20.00 18.00 14.00 10.00
300 12.00 9.60 24.00 21.60 16.80 12.00
Endless Roundsling
Larger sizes availaBle upon request
Page 17
Textile sling extras
Information availaBle upon request
Multiple leg sling
Protective wear sleeves
Boat sling
WeBBing net
Page 18
50mm wide ratchet assemBly
Minimum Break Strength
Endless – 10 tonne
2 Part – 5 tonne
Rated Assembly Strength
Endless – 5 tonne
2 Part – 2.5 tonne
AvailaBle end fittings
AvailaBle colours
Minimum Break Strength
Endless – 20 tonne
2 Part – 10 tonne
Rated Assembly Strength
Endless – 10 tonne
2 Part – 5 tonne
75mm wide ratchet assemBly
AvailaBle end fittings
AvailaBle colours
Ratchet restraint assemBlies
Other sizes availaBle on request
Page 19
Safety factor MBL equals 2 x lashing capacity
Standard BS EN 12195-3
Finish Grab hooks complete with safety locking pin
Chain Size mm
Lashing Capacity
kN
A
mm
B
mm
C Open mm
C Closed
mm
E
mm
Weight
kg
8 40 397 66 808 605 12 4.8
10 63 397 66 809 606 16 5.6
13 100 397 66 862 659 18 6.5
16 160 397 66 896 735 20 10.5
Ratchet LoadBinder
(dwang)
Page 20
Material EN14 or equal
Safety factor MBL equals 5 x SWL
Standard BS 4278
Finish Self colour or zinc plated
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Dia Thread
Dia Base
Dia Eye
Outside
Dia Eye
Inside
Thickness Collar
Height Thread Length
Weight Each
Tons
a mm
b mm
c mm
e mm
f mm
g mm
h mm
kg
0.10 6 22 33 15 7 36 18 0.06
0.15 8 22 33 15 7 36 18 0.06
0.25 10 22 33 15 7 36 18 0.06
0.40 12 22 33 15 7 36 18 0.06
0.50 14 29 44 20 10 48 23 0.15
0.80 16 29 44 20 10 48 23 0.15
1.00 18 36 52 24 12 58 28 0.27
1.60 20 40 59 27 14 65 32 0.38
1.60 22 45 64 30 14 73 35 0.54
2.50 24 52 77 35 17 84 40 0.85
2.50 27 58 85 39 20 94 46 1.13
4.00 30 65 96 44 22 106 51 1.62
Collared eyeBolts
Metric coarse thread (Larger sizes AVAILABLE on request)
Larger sizes AVAILABLE on request
Page 21
Material High tensile steel
Finish Self colour or Zinc plated
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
NOTE These eyebolts are for vertical lifts only
Working Load Limit
Dia Thread
Dia Eye
Inside
Dia Eye
Length Base to Centre
Thread Length
Base Height
Dia Base
Weight Each
Tons
a mm
b mm
c mm
d mm
e mm
f mm
g mm
kg
0.10 6 22 9 27 18 5 17 0.07
0.15 8 22 9 27 18 5 17 0.07
0.25 10 22 9 27 18 5 17 0.07
0.32 12 22 9 27 18 5 17 0.07
0.50 14 29 11 34 23 6 23 0.14
0.63 16 29 11 34 23 6 23 0.14
1.25 20 40 15 47 32 9 32 0.40
2.00 24 51 19 60 40 12 40 0.80
Page 22
dynamo eyeBolts
Metric coarse thread
Larger sizes AVAILABLE on request
Material EN14 material or equal
Safety factor MBL equals 5 x WLL
Finish Self colour or zinc plated
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Dia Thread
Dia Base
Dia Eye
Outside
Dia Eye
Inside
Thickness Collar
Height Thread Length
Weight Each
Tons
a mm
b mm
c mm
e mm
f mm
g mm
h mm
kg
0.25 10 22 33 15 7 36 178 0.18
0.40 12 28 41 19 11 45 178 0.25
0.50 14 36 52 24 14 58 178 0.40
0.80 16 36 52 24 14 58 178 0.44
1.00 18 43 62 29 17 69 178 0.70
1.60 20 43 62 29 17 69 178 0.70
1.60 22 50 73 33 17 74 178 1.05
2.50 24 57 82 38 19 87 190 1.50
4.00 30 71 104 48 24 116 190 2.80
Page 23
Long shank collared EYEBOLTS
Metric coarse thread
Larger sizes AVAILABLE on request
Material High tensile steel
Finish Self colour or zinc plated
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
NOTE These eyebolts are for vertical lifts only
Working Load Limit
Dia Thread
Dia Eye
Inside
Dia Eye
Length Base to Centre
Thread Length
Base Height
Dia Base
Weight Each
Tons
a mm
b mm
c mm
e mm
f mm
g mm
h mm
kg
0.10 6 22 9 27 18 5 17 0.07
0.15 8 22 9 27 18 5 17 0.07
0.25 10 22 9 27 18 5 17 0.07
0.32 12 22 9 27 18 5 17 0.07
0.50 14 29 11 34 23 6 23 0.14
0.63 16 29 11 34 23 6 23 0.14
1.25 20 40 15 47 32 9 32 0.40
2.00 24 51 19 60 40 12 40 0.80
Page 24
Long shank dynamo EYEBOLTS
Metric coarse thread
Larger sizes AVAILABLE on request
Material High tensile steel
Safety factor MBL equals 5 x SWL
Finish Self colour or zinc plated
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
Working Load Limit
Dia Thread
Dia Eye
Dia Base
Dia Eye
Inside
Base Height
Height Overall
Weight Each
Tons
a mm
b mm
c mm
d mm
e mm
f mm
kg
0.30 10 13 29 44 22 78 0.25
0.50 12 13 29 44 22 78 0.26
0.80 16 13 29 44 22 78 0.27
1.20 20 16 39 49 26 84 0.45
2.20 24 19 44 52 38 111 0.79
Page 25
eyenuts
Metric coarse thread
Larger sizes AVAILABLE on request
Material BS970 150 M19 or equal
Standard To admiralty pattern, drawing 002521434
Finish Self colour, normalised condition, hardness HB159-229
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
NOTE This product is identified with a proof load, which is subject to the correct
welding procedure being carried out
Proof Load
Admiralty Pattern
No
Dia Dia Eye
Inside
Width Base
Length Base
Thickness Base
Height Overall
Weight Each
Tonnes
a mm
b mm
c mm
d mm
e mm
f mm
kg
2.00 4014 10 20 25 45 6 38 0.14
3.50 4015 12 25 35 60 8 50 0.33
5.50 4016 16 32 45 70 10 64 0.53
7.50 4017 19 38 50 85 12 76 0.77
9.60 4018 22 42 60 102 13 89 1.27
13.00 4019 25 50 70 115 16 100 2.00
15.75 4020 28 57 76 130 18 114 2.90
20.00 4021 32 64 85 145 19 128 3.86
29.00 4023 38 76 100 170 22 152 6.58
50.00 4027 50 100 140 230 30 203 14.98
Weld on lifting eyes
Page 26
Additional lifting points
Information on request
Yoke Rotating
lifting point
Weld-on
lifting point
Bolt-on
lifting point
Gunnebo Rotating
lifting point
Yoke Swivel
hoist ring
weld-on
excavator hook
RUD Rotating
lifting point
RUD Rotating
Load ring
RUD starpoint
Can’t see what you’re looking for? Contact
us, we’d Be more than happy to help !
Page 27
Standard BS EN 13155:2003
Safety factor Proof Load equals 2 x SWL
Certificate Scotia Handling LOLER report of thorough examination is supplied as
standard. Supplier EC declaration of conformity can be supplied on request.
NOTE These pins must be used either in pairs or as a set of three
Lifting Position
(rotate 180° for
quick release)
SWL kg
per pin
A
mm
B
mm
750 120 25
1000 150 32
1500 170 35
2000 200 38
Manhole lifting pins
Page 28
Standard EN 361
Buckles AvailaBle Standard or Quick Release
Sizes AvailaBle Small, Medium, X-Large or XX-Large
Clips & points 2 forged D clips & 4 adjustment points
Certificate Supplier EC declaration of conformity
Correct sizing of a harness is essential for safety and comfort. It’s important that the harness fits properly and
that it has the possibility to adjust it correctly to ensure it is neither too loose nor too tight.
If the harness is correctly dimensioned and adjusted, the forces on the body will be distributed correctly. This
enables the body to better withstand the impact of fall, ensures that the attachment points are in the right
place and that the body remains straight in the event of a fall.
HT22 full BODY harness
Harness sizing
Page 29
Tractel
HT ET11
Additional harnesses
Information on request
Tractel
HT10
Tractel
HT120
Tractel
Transport
Tractel
Secours
Tractel
promast
Tractel
HT34
Tractel
HT easyclimb
Tractel
HT ladytrac
We can also supply P+P, Honeywell, Miller,
Protecta, Kratos & many more!
Page 30
Lanyards
Other styles AVAILABLE ON REQUEST
LD Restraint
Lanyard
Standard EN 354
Material Rope or webbing
Lengths 1 metre, 1.5 metres
or 2 metres
Certificate Supplier EC
declaration of conformity
LDA Fall Arrest
Lanyard
Standard EN 355
Material Rope or webbing
Lengths 1 metre, 1.5 metres
or 2 metres
Finish Complete with shock
absorber
Certificate Supplier EC
declaration of conformity
LDr adjustaBle
Lanyard
Standard EN 358
Material Braided rope
Lengths 1.5 metres or 2
metres
Certificate Supplier EC
declaration of conformity
LDAD Twin
Lanyard
Standard EN 355
Material Braided rope
Lengths 1 metre, 1.5 metres
or 2 metres
Finish Complete with shock
absorber
Certificate Supplier EC
declaration of conformity
Page 31
We can also supply P+P, Honeywell, Miller,
Protecta, Kratos & many more!
M47
M53
M60
M10 Manual screwing lock – 18mm opening
M11 Semi-automatic locking – 17mm opening
M23 Automatic locking triple safe – 18mm opening
M41 Double trigger automatic opening – 21mm opening
M47 Double trigger automatic opening – 18mm opening
M53 Double trigger automatic opening – 50mm opening
M60 Semi-automatic locking – 50mm opening
M12 Manual screw locking – 17mm opening
M15 Semi-automatic locking – 20mm opening
M22 Automatic locking triple safety – 24mm opening
M42 Double trigger automatic locking – 18mm opening
M51 Double trigger automatic locking - 60mm opening
M52 Sliding ring and retractable pawl – 60mm opening
M54 Double trigger automatic locking – 110mm opening
Lanyard CONNECTORS
STEEL CONNECTORS
STANDARD EN 362
M10
M11 M23
M41
aluminium CONNECTORS
STANDARD EN 362
M12
M13
M15
M22
M40
M42
M51
M52
M54
Page 32
Material Galvanised fittings, epoxy paint for much greater resistance to aggressive
environments
Finish Black or Silver Chain and forged hook steel hooks with 360° rotation and
overload opening indicators
Certificate Supplier EC declaration of conformity
NOTE Standard chain length is 3 metres. Other lengths available on request
Working Load Limit
Number Of
Falls
Lifting Height
Tonnes
Metres
0.25 1 3
0.5 1 3
1 1 3
1.5 1 3
2 2 3
2 1 3
3 2 3
5 2 3
10 4 3
20 8 3
Tralift manual Chain BLOCK
(Other manufacturers AVAILABLE)
Page 33
Material Galvanised fittings, epoxy paint for much greater resistance to aggressive
environments
Finish Black or silver chain and forged hook steel hooks with 360° rotation and
overload opening indicators
Certificate Supplier EC declaration of conformity
NOTE Standard chain length is 1.5 metres. Other lengths available on request
Working Load Limit
Number Of
Falls
Lifting Height
Tonnes
Metres
0.25 1 1.5
0.50 1 1.5
0.75 1 1.5
1 1 1.5
1.5 1 1.5
3 1 1.5
6 1 1.5
9 1 1.5
BRAVO ratchet lever hoists
(Other manufacturers AVAILABLE)
Page 34
Miscellaneous
Gin wheel
Snatch BLOCK
Single sheave
T508, T516, T532
tirfor
TU8, TU16, TU32
tirfor
Girder clamp
BEAM clamp
A-Frame gantry Spreader BEAM
Page 35
Hire of test weights
CaliBration certificates AVAILABLE
Minimum 3 day hire period
20kg & 25kg Hand Weights
225m
m
250kg Weight
250kg Weight
105m
m
Page 36
500kg Weight
105m
m
1 Tonne Weight
500m
m
Hire of test weights
continued
490m
m
2 Tonne Weight
Page 37
Inspection, Load Testing & NDT
On-site or in our workshop
INSPECTION
We carry out LOLER inspections of all lifting equipment both here, in our workshop, or on-site anywhere
throughout Scotland and Northern England. We can also travel further – even to India on one occasion, so if
you require us to travel further afield please get in touch to discuss your needs!
We have a number of mobile vans stocking a wide range of inspection equipment and spare parts for lifting
gear. All equipment once inspected is supplied with a report of thorough examination detailing the item, SWL,
inspection date and when the item is next due for inspection. We also offer a colour coding system using
either cable ties or Ritchie tags which are changed every 6 months to eliminate the risk of equipment being
used that has not been inspected.
LOLER regulations state that lifting accessories (slings, shackles, eyebolts, anything connecting a load to a
lifting appliance/machine) require at least 6 monthly inspection. For lifting appliances/machinery (chain blocks,
lever hoists, cranes, hoists, winches, forklifts and anything lifting a load either manually or machinery operated)
in the marine shipping and offshore industry, the MCA (Maritime Coastguard Agency) legislates that lifting
equipment should be thoroughly examined annually and proof load tested every 5 years.
LOAD TESTING
Our in house facilities include 30 tonne and 100 tonne hydraulic test beds, various hydraulic jigs, rams and
special purpose testing frames. We can design and engineer structures to load test a wide range of lifting
accessories.
We have a number of mobile vans stocking a wide range of load testing equipment, to allow for many
different testing solutions. All equipment once tested is supplied with a certificate which clearly indicates the
safe working load (SWL) and/or proof load (PL). We have test plates which can be attached to each item tested
indicating the ID number, SWL and test date.
NDT
We are also able to offer both destructive and non-destructive testing. A very easy way to determine the SWL
of a new piece of equipment would be to destructively test a sample to establish if it is able to reach its
maximum breaking load without failure. Non-destructive testing can include Magnetic Particle and Dye
Penetrant testing, which can be used for both pre and post load testing to ensure that there is no weakness in
the equipment which is not visible to eye.
Page 38
Certification
For all new supply, inspected and tested items
We provide LOLER certification for all items either supplied, inspected or tested as standard. We can
also provide Declaration of Conformity certificates for each newly supplied item. We use an online
certification portal which each customer is given unique log in details to access at any time!
Once logged onto our portal, you are able to see a list of all of your active sites. This will allow you
to check the expiry date of each site, without having to access them all individually.
After you have clicked into a particular site, there are a number of options – this ranges from
opening individual certificates, downloading a batch of certificates or exporting a site register.
We do have a user guide available to help navigate your way around the site, or one of our team
will be more than happy to help should you have any issues!
Page 39
Please use URL hhtp://scotiaportal.motionkinetic.net/ to access our online portal, where you will be
prompted to enter your username and password. These should have been provided to you by our
office, should you need to reset these at any time please let us know.
Please be advised we do recommend using Google Chrome as your browser method to ensure you
are able to use the portals full functionality.
Page 40