PRUSA MENDEL I3 REWORK
HOW TO INSTALL SOFTWARE: STEP 1: Arduino_mega_driver
Dpnist-amd64 (run the file)\
STEP 2 : Arduino-1.0.6-windows (run the file)
STEP 3: Printrun-win-slic3r-12july2013Pronterface ( run the file)
STEP 4 : printrum-win-slic3r-12july2013
Slic3r (open the folder)
Slic3r (run the file) Slic3r-console (double click)
STEP 5: Marlin-ramps-i3-250000 Marlin Create_speed_look uptable (Double click on it) and select(through the online) the browser(internet explore or Chrome ) and save the file.Create Temperature look uptable Marlin (Double click on it) and select(through the online) the browser(internet explore or Chrome ) and save the file.
Now Marlin (Arduino file) will be installed in Marlin with arduino logo
Marlin (Arduino file)..(double click and minimize the file)
Connect the cable from system to prusa i3
STEP 6 : Start
Device Manager (search and open Device manager) Ports(COM & LPT) Right click on Communication ports (COM 4) and update the driver (click on it) Search automatically for update drivers software ( click on it) Text box show (windows has determined the driver software for your device is up to date)
Close STEP 7 : Marlin-ramps-i3-250000
MarlinMarlin (Arduino file)..(double click )
Select the Configuration.h
Open the file
Select the Example
Select the basic
Select the Blink
In the Blink file (select the TOOL)
Select the Board
Select the Arduino Mega 2560 0r Mega ADK
Select the serial port ( COM4 )
Upload
It will show the Done uploading
In Same way we have to do in Marlin
Minimize the file and open the Pronterface
Select the port
Set the Motor XY: 500 Y: 200
Check the navigator of X Y & Z (home)
Set the HEAT and BED
Check the EXTRUDE Select the Setting
Click on slicing setting
ADD the file (.stl)
Do setting as per requirement(plater, print setting , filament setting , printer setting ) then Export in . G-code file.
Now upload to Pronterface
Click on the print