R-TOES’16
R-TOES’16
Release –Talent of Electronics & Communication
Students
R-TOes ’16
(Electronics & Communication Department magazine)
G.H. Raisoni Academy of Engineering &
Technology (Plot no.37-39/I, Shraddha Park, Near Facor steel, off Hingna Wadi link road, Nagpur-440028)
R-TOES’16
Published By: ELECTRONICS & COMMUNICATION DEPARTMENT G. H. Raisoni Academy of Engineering & Technology, Nagpur.
Conceptualized by: Dr. Sanjay L. Haridas,
Head of Department.
Electronics & Communication Engineering,
G. H. Raisoni Academy of Engineering & Technology, Nagpur.
Coordinated By: Mr. Amol Boke,
Assistant professor,
Electronics & Communication Engineering,
G. H. Raisoni Academy of Engineering & Technology, Nagpur.
Magazine credits: FRONT/BACK COVER DESIGN : Ms. Bhagyashree .H. Vishwakarma.
EDITORIAL PANEL : Ms. Bhagyashree .H. Vishwakarma.
: Ms. Monali Pote.
: Mr. Amit Choudhary
DISCLAIMER:
The views expressed in the text by various authors are their own and ‘G.H. Raisoni Academy
of Engg. & Tech.’ or ‘R-TOES’16 magazine team’ & ‘Management of pEaCE’ do not take any
responsibility for that.
R-TOES’16
Wall Magazine Credits (Designed & conceptualized by 3
rd
year students)
1. Priyanka Vyawahare
2. Mayuri Jaodand
3. Anagha Deshmukh
4. Vedashri Dixit
5. Shyamali Badole
6. Shrikrushna Uperikar
R-TOES’16
Contents
• MESSAGES
• FACULTY REVIEW
• PEACE MEMBER LIST.
• PIXELATE (Photo gallery)
• ARTICLES –
TECHNOTRONICS-
1. DISTRIBUTED ELECTRONIC INTERLOCKING FOR AUTOMATIC SIGNALLING SYSTEM.
2. THE FUEL CELL.
3. THE SIXTH SENSE TECHNOLOGY.
NON TECHNICAL SECTION-
1. GO FOR IT.
2. AVERAGE COLLEGE STUDENT.
3. A BIG QUESTION.
4. YES, YOU CAN.
5. OHH WOMENIA.
6. GOD’S COMPLAIN
ARTIFACT (Art section)
REMENISENCE (Alumni section)
ANTRAGNI’16
DIL SE (Final year views)
PLACED STUDENTS
OUR ACHIVERS
OUR RECRUITERS
BACK INNER PAGE
BACK COVER PAGE.
R-TOES’16
IDEA
Right train of thought can take you to a better station in life....
The name of this magazine R-TOES came from the fact that it will be a platform for
electronics and communication department students to showcase their talents in both co-
curricular and extracurricular activities, hence “Release Talent”.
This Magazine will be annually published which will contain all the happening in
Electronics and Communication Engineering department. This Magazine will cover all the events
which are taken under student forum PEACE and also IETE student forum. Also it will include the
technical as well as non technical articles from students of Electronics and Communication
Engineering department. The section “ARTIFACT” is art section in which student can student
can shoe their hand in painting, posters, rangoli etc. Next the “REMENISENCE” section will have
messeges and best wishes from precious alumni of our Electronics and Communication
Engineering department. And last but not least “Dil Se ” section is allowing our final year
students to express their emotions as they say good bye to college and their own Electronics
and Communication Engineering department.
First edition is launching in the year 2016 & is edited by 'Bhagyashree Vishwakarma' &
„Monali pote‟, hope the students will continue the trend & modernize it as per requirement.
R-TOES’16
MESSAGES
R-TOES’16
R-TOES’16
R-TOES’16
R-TOES’16
R-TOES’16
R-TOES’16
R-TOES’16
Faculty Reviews
Prof. VIBHA.R.
BORA
“No matter who you are, no matter where you’ve come from, you
can always change; become a better version of yourself.”
Clearly proves the quote by all of you. Let us cultivate our garden.
Best of luck for your future endeveours.
Prof. R. W. JASUTKAR
“Life is all about CHANCES & OPPORTUNITIES. Never leave
anything to CHANGE & never let an OPPORTUNITY get away.”
Prof. SANJAY TEMBHURNE
Dear students
Engineers are icon of commitment to serve to society and
development of country. It is engineer who makes the nation, by
developing new technology and idea. Today china is the biggest
economy, on the bases of their engineer’s commitment and
innovation they beat USA. Engineers play key role in
development of china, India is also not far behind them we stands
3rd even after all its limitation. India put first step toward fast
development in late eighties when Rajeev Gandhi brings telephone
& Computer to India.
My words are pretty clear that and electronics engineer can
change the economy of any nation. Good engineer with innovative
brain will bring India to Number one position. I give my best
wishes to all students happy life, become good human being and
engineer. Bring our nation to 1st position that must be only goal
of every citizen spicily electronics engineer as they are playing
key role in the development of nation. Do you people know that
61% of Indian GDP is depends on telecommunication and
electronics this development was started in 1991.
At last some great word from Mr. Ratan Tata
Before you pray Believe
Before you speak Listen
Before you spend Earn
Before you write Think
Before you quit Try
Before you Die Live
R-TOES’16
Prof. SHUBHANGINI
UGALE
“A journey to a thousand miles starts with a single step”.
Opportunity never get again and again so, ones you get a chance
do not avoid, try to face every problem.
Definitely you will success in your life.
Prof. PRAGATI KENE
"Maybe today you don't achieve everything you want, but if you
aim
always in the same direction, you will be a person destined to
succeed."
"I know how challenging it can be to think positive when there are
so many things going wrong in your life, but until you change
the way that you think, you will not achieve the life that you are
looking for."
Prof. VRUSHALI
KILCHE
Nothing can come in between you & your destiny, If you grab hold
of every opportunity…
Nothing can come in between you & your faith, If you strive to be
great…
Nothing can come in between you & your success, If you give it
your best shot & nothing less.
R-TOES’16
PEACE STUDENT ASSOCIATION MEMBER LIST 2015-16
Sr. No.
NAME
DESIGNATION
1. BHAGYASHREE
VISHWAKARMA
PRESIDENT
2. JAYESH GOHLAR VICE PRESIDENT
3. MONALI POTE SECRETARY
4. PRIYANKA VYAWHARE JOINT SECRATARY
5. SAURABH GEDAM TRESURER
6. GOKUL MEHADIYA PRINT & MEDIA HEAD
7. MONIKA REWATKAR CO-ORDINATOR
(CREATIVE DEPARTMENT)
8. SHYAMLI BADOLE CO-ORDINATOR (HOSPITALITY DEPARTMENT)
9. ANAGHA DESHMUKH CO-ORDINATOR
(CULTURAL DEPARTMENT)
10. NIKITA YELEKAR CO-ORDINATOR
(CULTURUL TEAM MEMBER) 11. VEDASHRI DIXIT CO-ORDINATOR
(F&V DEPARTMENT)
12. MAYURI JAODAND CO-ORDINATOR
(F&V DEPARTMENT)
R-TOES’16
Pixelate
R-TOES’16
R-TOES’16
R-TOES’16
E&C Toppers of 2013-14 2nd Year B.E. 3rd Year B.E. Final Year B.E.
Ankush Barai , 69.61%
Rootuja Kosare, 66.96%
Shivani Kumbhalkar , 70.15%
Surabhi Dhadarde , 70.00%
Tarashankar Meshram 73.33%
Piyush Deshmukh 71.63%
1st Year M.Tech. (VLSI) 2nd Year M.Tech. (VLSI)
Ruchi Vairagade , 71.18
Sandra Francis , 70.9%
Sushma Mahakalkar 77.76&
Hari Babu 75.90%
E&C Toppers of 2014-15
2nd Year B.E. 3rd Year B.E. Final Year B.E.
Nirav Bakore , 69.52%
Shyamlee Badole , 66.06%
Nishchay Khobragade, 66.61%
Juhi Bisne , 64.230%
Himanshu Kumar, 73.64%
AREESH BALAGA, 72.67%
1st year M. Tech. (E&C) 1st Year M. Tech. (VLSI) Final Year M. Tech. (VLSI)
Fiza Firdaus , 71.58%
Vaishnavi Jumade , 70.91%
Nilima Pannase , 73.24%
Manish Jaiswal , 71.00%
Sandra Francis , 74.79%
Ruchi Vairagade . 74.27%
R-TOES’16
Activities
R-TOES’16
Guest Lecture on “Electronics Industry, Eco-System & Upcoming
Technologies”
R-TOES’16
Workshop on “Design &
Development of Raspberry
Pi based Systems”
R-TOES’16
E & C Dept of GHRAET organized Industrial Visit to Venus Industries
R-TOES’16
Industrial Visit at “PARLE PRODUCTS, Nagpur”
ISTE Approved Short Term Training Program on “Engineering applications using LabVIEW”
R-TOES’16
R-TOES’16
R-TOES’16
Articles
TECHNOTRONICS
(TECHNICAL SECTION)
R-TOES’16
Distributed electronic interlocking for
automatic signaling system
Amit choudhary , Monali Pote, Bhagyashree Vishwakarma, Gokul Mehadiya
Final year B.E., Dept. E&C
ABSTRACT-
Now a day‘s, its herculean task to manage the train movement
between various stations in a railway division involving manual labor
and data transfer through phone calls and record entries.
Constant signaling is needed at each station the train crosses by, with
the flag master waving the green flag and being reciprocated by the
respective guard under duty. The respective stations control the
signaling but can be signaled only after proper authentication from the
Signals & Telecommunication department in a divisional Railway
under various Zones. The main objective behind making any project is
to learn & innovate new things. This project is a real time project &
already in use by Metro railways, we want this to be implemented in
Indian railway system. Our project is to develop a system which
automatically controls the signaling of the train on a particular track
line, by establishing optical sensors at particular intervals along the
track length and by taking the feedback from the sensors, the signaling
will be done by the logic written in the micro controller programming
and a the movement of the trains can be monitored in a display at the
Route Relay Interlocking department and the Signals &
Telecommunications department. The project highlights the concepts
of managing the train movement between the stations thereby
reducing the probability of collision and wasting of time by using
distributive and computational system. The project concludes with the
route relay interlocking systems. We can modify this project further
by implementing automatic break in trains.
Keywords— Relays, Microcontroller, LCD.
•
•
• INTRODUCTION-
Railway traffic control requires dedicated point-to-point
and point-to-multipoint circuits for communication over
larger number of signal points spread along the track. A
typical dispatcher control section spreads over 200
kilometers with 30 to 40 signal points. Delay in travel is
major concern for everyone these days. Now a day‘s
signaling is most often become a hectic task in managing
trains. When this delay is occurring in remote areas or
during night times the loss or damage being caused is at
higher rates. The losses are heavier due to improper reach
of service at right time due to improper communication.
The automatic signaling system can overcome such delays
and problems particularly in the off-station signaling. The
train management system can be broadly classified as:
• One train only system.
• The train staff and ticket system.
• The pilot guard system.
• The following train system.
• The absolute block system.
• The automatic block system.
Automatic block signaling system (ABS):-
• ABS is a railroad communication, tracks are divided into
blocks of one km and signal booths are placed at the end
of one km.
• System controls the movement of train between the
blocks using automatic signals using computational and
distributive system.
• A train moving in one direction on a track uses this
signaling system.
• Automatic operation comes from the system ability to
detect if the forward blocks are occupied or vacant.
R-TOES’16
II. SYSTEM ARCHITECTURE
Once the train is off the platform in a particular station, then the
signaling can be done automatically by its movement depending on
the traffic ahead of the train. When the train starts moving, it moves
forward if and only if it gets the green or yellow or double yellow
signal for forward blocks. If the signal is red driver will stop at that
block only.
Aspects of signaling:-
In ABS we are using four aspects signaling, they are;
• Red signal- Indicates stop signal.
• Yellow signal- Minimum clearance of one block.
• Double yellow- Minimum clearance of two blocks.
• Green signal- Minimum clearance of three blocks.
This type of signaling is used mainly to allow multiple trains on a
single track thereby reducing the time wastage and collision of
trains. The train moves as per the front signal the signals keep
changing behind the train as per the movement, giving safety of
three tracks. Here we are using relays, microcontroller, track
changer (point). With the feedback and the program code in the
micro controller, the programming is done using ‗c‘ and assembly
level language. We can also provide a display at the RRI indicating
the train position.
Block diagram:
Project is mainly divided into two systems-
• Computational system: It is the main part of the
project, & is situated at the control room, all the
computing of various blocks is done here.
• Distributive system: This is placed at every signal
booth and displays the signal as per train
movement. All the distributive system
communicates with computational system and the
signal will be displayed only if both the outputs of
computational and distributive system matches.
III. HARDWARE DESIGN
• The Sensor & Signaling Module The sensor and signaling module
consists of optical sensors installed along the railway track at the
signal poles. When the train starts from a station the sensors placed
along the track at regular intervals of 1-2 kilometers senses the
train and immediately it sends feedback to the microcontroller
placed at the Route Relay Interlocking section or station master‘s
chamber.
Optical sensor network, which combines computer and
communication technology with the technology of sensor network,
is considered to be one of the emerging technologies that will
affect on the future of human civilization. A sensor (also called
detector) is a converter that measures a physical quantity and
converts it into a signal which can be read by an observer or by an
(today mostly electronic) instrument. A sensor is a device which
receives and responds to a signal when touched. A sensor's
sensitivity indicates how much the sensor's output changes when
the measured quantity changes.
Relays works as automatic switch here & plays very important role
in railway system. Whole railway system depends mainly on relays
& is done by using relay. There are different types of relay they are
capacitor relay, magnetic tape relay, solid state relay, hybrid relay,
timer relay, thermal relay, etc. Capacitor relays are used in the
group of thirty.
• Micro controller Module:
The program for a microcontroller is normally stored on a memory
of IC called EEPROM (electrically erasable prom). In recent years
a growing number of micro controllers have offered the capability
of having programs loaded internally into the microcontroller IC
itself. Rather than having a circuit that includes both a
microcontroller and external EPROM it is now possible to have a
microcontroller which store program code internally.
R-TOES’16
In our project we are using ‗HERCULES TMS570LC4357 OR
RM57L843‘as a main MC .This microcontrollers are mainly used
for high speed communication.
How Texas instruments (TI) Hercules MCUs can help users for
developing high speed train systems:-
• Implementing a system of SIL 4 compliance.
• Implementing specific CPU and Memory self test
requirements.
• Providing a reliable inter-system communication
interface.
• High speed inter system communication interface.
• Comparing analog components.
• System certification.
The TI Hercules MCU family offers:-
1. SIL 3 certified MCUs help customers to design overall
system that must satisfy the HFT=1 and SIL 4 requirements.
2. Hardware based high coverage CPU and Memory self test
meeting or exceeding the EN.
3. Flexray module provides a deterministic and fault-tolerant
inter-system communication interface.
4. The Ethernet module providing a standard high speed
communication interface needed for high speed trains.
5. Wide selection of analog companion component including
the tps65381-Q1 power supply and watchdog.
6. IEC 61508 SIL 3 certified MCUs with safety manual and
FMEDA tools.
IV. Working:
When the train passes from the track changer (point) situated at the
end of every block, the circuit becomes complete which constitutes
the track point, high voltage electric cables on the top of train,
metal wheels & metal track. When all this completes the circuit it
generates high voltage current and sends signal to sensor circuit
situated at distributive system and this distributive system sends
signal to computational system which computes the signal matches
with the previous and distributive output and displays the signal.
Figure shows the working of signals:
When the train passes from a block the first block behind the train
displays red signal. Last two blocks displays yellow and last three
block displays yellow signal and the fourth block displays green
signal. Hence gives the minimum safety of three blocks i.e. 3 km.
A: Block Diagram 1:
C: Circuit diagram:
From the fig above,
Hercules TMS570LC4357 MCU is the motherboard of the project,
power jacks are used to connect power supply.
Voltage regulator is used in between to control the flow of voltage
here MCU requires +3.3 V of voltage.
Debug probe is used to correct the program in real time if error
occurs.
Proto board headers are used to connect distributive circuitry and
peripheral devices.
R-TOES’16
Mezzanine headers are special type of ICs which has two output
pins in a single pin.
RJ45 magnetic are used to connect display devices like LEDs &
LCDs.
• Security of lights:
Special safety precautions are used for the working of this
project:
We are using double sets of everything we are using ie if one
system gets corrupted then the other will work efficiently and
the railway system will not suffer because of this(called as
HOT STAND BY) as many lifes depends on this system a
single mistake will leads to a major accident.
Also if some light fuses the precautions taken as:
• If red light of a block fuses it is pre analyzed by the
computational system and hence the signal before the
block at which light is fused display the red signal,
thereby giving safety of one block.
• If one of the yellow light fuses, the signal booth will
blink with single yellow light.
• If green light fuses, the signal booth will display
double yellow.
V. CONCLUSION:
Hence the conclusion drawn from this system that it is very much
safe and the TMS570LC4350 enhances its working in real time
operation offering robust communication & high speed working.
But the safety is limited as it slightly dependent on LOCO PILOT
if he will ignore the signal there are chances of accidents.
Hence in future this problem can be eliminated by using automatic
break system in trains which communicates with the signals and
work as per computations.
APPLICATION:
Our project is a real time project and already in use by METRO
Railways.
It can be used by INDIAN Railways.
ADVANTAGES:
• Time saving.
• Less chances of accident.
• No manual assistant is needed.
• Backup system is available.
• Alarm rings at control room if failure occurs hence easily
detectable.
ACKNOWLEDGMENT
This work has been done as a Final year BE project under the
frame of ‗G.H Raisoni Academy of Engineering and Technology‘
and ‗Indian Railways‘ Nagpur. The authors acknowledge the
support of the Project guide-Prof. Vipin Bhure & Guide from
Indian Railway Mr. Madan Mohan Mishra.
R-TOES’16
THE FUEL CELL
The first law of thermodynamics states, ―Energy
can neither be created nor destroyed, but can be
converted from one form to another‖. The first part
of this law tells us that there is a fixed amount of
energy in the universe whereas; the second part
gives a sneak peak into how we can utilize the
available energy to alter it into a form which is
useful to us. The ideal case would be that the entire
portion of the source energy be converted to the
form of our choice. For example, a perfect gasoline
car would produce the energy which is exactly
equal to the energy released by breaking the bonds
of the hydrocarbon fuel through combustion, which
would mean a 100% efficient machine. Unfortunately,
we don’t live in such a perfect universe and such a
machine (called a perpetual motion machine of the
first kind – PMM 1) doesn‘t exist. There are always
losses when energy conversion is concerned, either
through friction, heat or vibration. This means that
the source energy isn‘t exactly converted to just one
form of energy. Therefore, engineers don‘t try to
eliminate losses when designing machines instead
try to minimize the losses to the greatest extent by
utilizing the second law of thermodynamics which
deals with the concept of ―Entropy‖. Basically this
law explains the directionality of energy transfer by
dividing energy into two categories, high grade
energy and low grade energy. A high grade energy
can be easily converted to a great extent into a low
grade energy but the reverse is more inefficient.
Considering the example of a gasoline engine in a
car, chemical energy from the gasoline is first
converted to thermal energy (lower grade energy)
by combustion and then into mechanical energy
(higher grade energy) leading to low efficiencies
(about 25% to 30%). If we could eliminate the
process of conversion to lower grade energy, we
could create a more efficient power device. This is
exactly the purpose behind a ―Fuel Cell‖ which
directly converts chemical energy to electrical
energy. In this article we will understand how a fuel
cell works, its various types and its applications.
The Fuel Cell – Working
The fuel cell is basically an electrochemical
energy conversion device working on a principle
which is reverse to ―Electrolysis‖. In electrolysis,
water is broken down by applying electricity into
hydrogen and oxygen whereas; in a fuel cell
hydrogen gives its electrons to oxygen and forms
water. The path taken by the electrons is directed
through a circuit which produces electricity. Unlike
batteries, which are also electrochemical power
devices, fuel cells can constantly keep producing
electrical energy as long as the fuel is supplied.
The two components Hydrogen and oxygen are
separated by a membrane which doesn‘t allow the
passage of electrons. The hydrogen is passed
through this membrane separating the positive
hydrogen ion from the electron and goes through an
electrolytic solution towards the cathode section.
The electrons which cannot pass though the
membrane pass through the conductor into the
cathode section and form a negative oxygen ion.
The positive hydrogen ion and the negative oxygen
ion combine to form water which is let out as a
byproduct. The basic fuel hydrogen is supplied
through pressurized gas containers and oxygen from
air. The pressurized hydrogen container is quite a
heavy installment and therefore there are certain
fuel cells which are designed to operate from
hydrogen containing gases like clean natural gas or
renewable biogas.
By- Abhilash Goutam Kamble
VI Semester (ECE Branch)
G.H.R.A.E.T. Nagpur
R-TOES’16
The Sixth Sense
Technology
Sixth Sense is a wearable gesture interface
that augment the physical world with digital
world around us it comprise of hardware
components connected wirelessly to the
computing device it uses enabling surfaces,
walls and physical object as interface. Sixth
senses free the information from confine
surface. Thus making entire world your
computer integrating information into our
daily life not only reduce gap between
physical and digital world.
We’re evolved over millions of years to
sense the world around us. When we
encounter something, someone or someplace,
we use our five natural senses to perceive
information about it; that information helps us
make decisions and chose the right actions to
take. But arguably the most useful
information that can help us make the right
decisions is not naturally perceivable with
our five senses, namely the data, information
and knowledge that mankind has
accumulated about everything and which is
increasingly all available online.
Although the miniaturization of computing
devices allows us to carry computers I our
pockets, keeping us continually connected to
the digital devices and our interactions with
the physical world. Information is confined
traditionally on paper or digitally on a
screen. Sixth sense bridges this gap, bringing
intangible, digital information out into the
tangible world, and allowing us to interact
with this information via natural hand
gestures.
The sixth
sense
prototype
is
comprised of a pocket projector, a mirror
and a camera. The hardware components
are coupled in a pendant like mobile
wearable device. Both the projector and the
camera are connected to the mobile
computing device in the user’s pocket. The
projector projects visual information enabling
surfaces, walls and physical objects around
us to be used as interfaces; while the camera
recognizes and tracks users hand gestures
and physical objects using computer-vision
based techniques.
WuW (Wear your World) was the name first
proposed for this by Pranav Mistry, Pattie
Maes and Liyan Chang. Mistry tried up with
simple computer mouse first he put two roller
into one mouse and see if he could obtain
data and guide movement of mouse when
two rollers not worked properly he took 4
rollers. Four rollers gave him the idea that he
could use same idea on fingers and that
what he next moved on.
How Actually Information Flows
Device is connected to cloud it has lot of
search engine application program interface
like Amazon, While it connects you to internet
world, it still enables to access all dynamic
information/data while you continue being in
physical world.
R-TOES’16
Why Sixth Sense?
Human makes decision after sensing
everything but information which is collected
by human are insufficient to take right
decision. But information which could help
making a good decision is largely available
on net. Information can be collected by
mobile, computer etc. but it is restricted to
interface or screen and no direct relation
between tangible physical world and
intangible digital world. Give freedom to
interact with physical world by mere hand
gesture. Most used in artificial intelligence
this methodology can aid in synthesis of bots
that will be able to interact with humans.
Applications
Map function lets the user navigate a map
displayed on a nearby surface using hand
gestures. Zoom in; zoom out by user hand
gesture. The drawing applications let the
user draw on any surface by tracking the
fingertip movements, of the user’s index
finger and lots more application like making
a call, check schedules, stream video etc.
Advantages
It is an open source.
It is portable technology.
It doesn’t make human to understand
computer knowledge but it causes
machines and computer to adapt to
human needs.
It is cheap to build also connect real
world and information.
BY-AKSHAY MESHRAM
(6TH SEM, E&C)
R-TOES’16
Non-Technical section
GO FOR IT.... It's always like a question mark in our mind, what to do now? Had we ever thought of the
opportunities around us? Well, most of us even don't know the aim of our life!
It is rightly said that, "A goal without a plan is just a wish". Unless and until we don't know
the motto of our presence, we are unable to execute our dreams! A dream is a sort of
perception and making it into action is what you called it as your goal. Everyone must have
an ambition in his or her life but remember, it's easy to think but it's hard to execute!
"If you're unable to fulfill your dreams, someone will hire you to fulfill their dreams" This
particular quote has a great blow, if you think about it profoundly.
It's quite better to think about yourself, rather criticizing about others. Just set a short
defined goal, achieve it and then set another one... This will help you to move faster and
even better.
Just emphasize on the fact, what are you aspiring for? And remember nothing is
Impossible to do! Your efforts, dedication and devotion may make things crystal clear for
you!
Just live for your goals, die for your goals, respect the troubles and do for your own,
because a better start can give you a better future!
So, go for it...
Ashwini Wagh
3rd Year E&C
R-TOES’16
Average College Student
Hello my fellow students,
They told me that I have to write an article in college magazine because of one
quality they recognized after my interview, that “I am an average student”. I said
finally our time has come, for far too long our voices, the voices of the average
students were drowned out in a sea of unique individuals and over the
exceptional people. So I decided not to write an article but to have a
conversation with you from my heart.
All the years of relative mediocrity and refusing to think outside the box had
finally paid off. We the average continue to proof that procrastination and
apathy are not just big words but a way of life. This article is for the student who
have never encounter a problem as an opportunity but instead a threat, for the
same students who believes one day will be theirs, the ones who think Wikipedia
is the greatest invention of 21st century.
Looking back to 1st year it does feel like just yesterday, the first class, the first
test, the first roommate, the second roommate, the third roommate and figuring
out that you were the problem. The very first time you realize that money
doesn't grow on tree, it's actually millions of tons of fibers and there's no sheeps
in Nagpur, so you have to call your parents, then they send you sheep in the
bank and you have to give clarification on that. The point is, we all came to
college without knowing what we will become or what we will accomplish but we
leave knowing who we are, what we have become and that is a gift treasured and
remembered.
R-TOES’16
May be average is the new exceptional. We live in a society which emphasizes on
wealth, power and achievements. We are taught by the society that we should
work for fame, fortune and dreams but I am sorry to say average is much more.
Average is a parent who puts their child in school every day so they live a better
life than what they had. Average is a professor who helps you understand that
knowing who you are and owning your own sense of identity will only make you
stronger individual here but more important in life. Average is knowing you don't
receive respect, you have to earn it and you aren't given opportunity, you fight
for it. If anyone is telling you different then they are lying. Average is amazing
next to 20s on facebook; it is one of the greatest things in the world.
As you spent time in college you should celebrate it. Thank all the people at
each and every step of your life for being with you or had been with you, since
they helped to shape us and to become what we are today. Thanks all of those
people around you. As we move ahead into the future, do not forget the lessons
of the past. Remember there is a fire to achieve greatness in you. Let’s face it,
being average has it perks, no one thinks you are crazy and people will generally
like you. Which bring to me to my final point “Know yourself, Fight for Yourself
and win People's Hearts…”
By- Monali pote
(E&C 8th
SEM.)
R-TOES’16
A BIG QUESTION
It was the month of June 2013 when the drops of rain touches the earth and the pleasance of
earths smell spread all over with soothing cold winds, even the author was enjoying the
beauty of nature sitting at the corridor having a cup of tea.
Suddenly a call rings on her mobile and she shouted- ‘whaaattt??’ (With an expression of
fear).
With her shivering hand she browsed something on her mobile, the tea was left on the table
and it became cold now, but she was least bothered about it. After browsing half hour(as if
she was frozen at that chair and bound to browse) she rushed inside her house shouting
mamma, mummy where are u I got distinction in polytechnic(she was so so happy as if she
won million dollar in lottery) with 79%.
She hugged her mother with wet eyes, as passing polytechnic means allot to her & her mother
after 4 years of failure in her academics in BSC-CS, she lost all her hopes that she can even
study further & also she can be a graduate. After hearing this mother smiled with eyes full of
water & says ‘hummm kuch bhi, zhut bolrahi’, as it’s hard to believe that her daughter can
even pass.
She said, ‘I am not joking, see my result’ (showing her mobile).
After few months the CAP round started and each and everyone started giving their advice to
me & my parents as if they are master in every field, to join so & so college. Every new day a
new advice comes to me with valid justification, which made me puzzled. I felt, if taking
admission is that puzzling & mind threatening, then, ‘How much difficult is the studying’?
A BIG QUESTION aroused in author’s mind & she was sure every
student go through this stage & it’s a big question for every student, no matter it is about
R-TOES’16
taking admission in school or college. Even this is a big question for every parent who wants
their child to be a successful Businessman, Engineer, Doctor, or placed in top most company.
Being confused, after listening to everyone & taking into consideration author’s parent’s
financial status she filled the CAP round’s form. She was allotted ‘St. Vincent Palloti college of
engineering’ in first round she was very happy with it, as she wanted that college for further
studies, but due to some mistakes of university admission process was not completed. That
day was worst day of her life. But the worstest day is yet to come of which she was unaware.
With new zeal she filled CAP round-2 forms, after the results of cap round 2; she visited the
college a day before the admission (as we all do).
“What a joke?” she shouted, sitting in the car with her brother & fiancée (her face was full
of multiple expressions mixed up together, she was smiling with tears in her eyes, numbed for
few seconds, lips was locked, as if unable to utter a single word even if she wanted).
This all above expressions was just after having the first look of the college (the college was
under construction).
She cried allot that day, blaming her luck, thousands of questions are running in her mind, she
seemed to tackling and answering her own questions that day & night (she was not slept that
night).
The next day she went to that college with her parents and completed all the admission
procedure.
She started going college and now she is in Final year in the last semester of Electronics &
Communication branch in ‘G.H. Raisoni Academy of Engineering & Technology’.
May be the author was unable to explain her thoughts at the time of her admission but now
she has answer for every question even for THE BIG QUESTION.
A BIG QUESTION Was,
‘IS IT IS IMPORTANT TO TAKE ADMISSION IN BIG OR POPULAR
INSTITUES FOR BEING SUCCESSFUL ,BIG DOCTOR, ENGINNER OR
R-TOES’16
BUSINESSMAN OR BEING PLACED IN GOOD COMPANIES WITH GOOD
PACKAGE?
OR
IT IS IMPORTANT TO STUDY AND GAIN KNOWLEDGE TO BE PLACED
OR FOR SUCCESSFUL CARRIER?’
Author always see parents saying, ‘I want to admit my child in high class school or top most
college, whose building was very good, with excellent ambiance, that college having more
number of buses, so and so college or school is situated at very good area, that college or
school has excellent extracurricular activities’ & so on,
As it is said that,
“The more number of mouths, the more is the number of gossips”...
But, the author asks you all, to question yourself,
“Is it really matters that the ambiance, architecture design, extracurricular activities of the
college or school to be good or excellent for your children’s successful carrier?”
Or
“It is important that the college or school must have excellent faculties which will give your
child proper knowledge & environment to study?”
The ANSWER IS,
Both of the above really doesn’t matter if your child is not willing to study.
Author says, “ Padhne wale bacche kahi bhi padte”
I.e. A person who wants to learn, for them ambiance, building, environment, age, caste,
community doesn’t really matter.
R-TOES’16
“They find their way to learn, just like water finds its way to
flow”
If in any sense the above mentioned things had an impact on a person’s carrier then, the
person studying in corporation school must not have been an IES, IAS officer, a person from
low or middle class must not have topped in MPSC, UPSC exams.
Or all those who are reading this may or may not be from low or middle class or may or may
not have studied in corporation schools but you also acquired what you are today just because
of your hard work and not because of your college buildings.
Author does not oppose from taking admissions in good or big schools but just want to change
the mentality by her article that only by taking admission in big autonomous or reputed
schools or colleges your child can become successful. “Instead teach your child to
learn & earn & not spent and learn”
Author herself studied in government school, and then completed her polytechnic from
ShankarRao Dhawad Polytechnic which has small building. And then building after seeing
which she cried allot was G.H.Raisoni Academy of Engineering & Technology and now she is
the PRESIDENT of student forum of Electronics & communication branch appearing for final
exams.
Finally there is just one word difference between LEARN & EARN don’t make it difficult.
Author says-
“Muddaten beet jati hai shiddat se patthar ko tarashneme,
Par kuch shilpkar ka bhi naseeb hota hai...
Kuch amar hojate hai itihas ke panno me,
Or kuch tajmahal banake bhi gumnam hojate hai andhero me...”
Author-Bhagyashree Vishwakarma.
R-TOES’16
Yes, You Can
Never Frown: Smile Costs Nothing
Dear friends,
"Success is not the key to happiness. Happiness is the key to success. If you
love what you are doing, you will be successful'' -are the words of a great man. It is
often observed that people celebrate their achievement, their success and go on
merry making spree without thinking for a moment that they achieve their
respective cherished goals because of their dedication and resolution and those
virtues were enforced in their action because they loved doing everything they
wanted to without any stress and sense of compulsion. Even if some of them were
compelled to accomplish some tasks, they could succeed in Their efforts, because
of the fact that they felt they are meant for them and they should do whatever
they could, enjoying the experience of doing them. In fact you are not going to find
the circumstances always conducive to your assignment. But no circumstance
should appear to you impossible to work in, because every circumstance can be
made conducive with a little effort of some extra, if you have decided to prevail
and emerge victorious.
Whenever someone is told to present himself before a group of people, he
gets nervous, tense or stupefied. As a result, he tries to evade answers and start
tumbling. It happens to him because of his approach to this situation. He thinks it
to be an ordeal. One who takes the situation as an opportunity does just the
reverse. You are supposed to approach the situation positively and see it as
opportunity to exhibit your best rather than treating as an ordeal. Instead of
thinking in terms of surviving as an ordeal, think about how much this opportunity
is going to offer you, how much you are going to enjoy the experience your
positive approach supplies you with the fuel to face the situation with elan. You
must have seen many people excelling at public speaking. They are always relaxed,
smiling and clearly enjoying themselves. For them it is the most fun they ever get
to have at work. You might think that they are so relaxed because they know they
R-TOES’16
are so good, but it is just as likely that they learned to be good by making
conscious effort and set out to enjoy themselves. Here we should analyze the
statement made by a very successful person, Henry Ford, the founder of ford
motor company. He says ''coming together is a beginning; keeping together is a
progress; working together is a success''. You can work in a group only when you
enjoy the work.
You should do every work without thinking that people suppose you to do the
work in the perfect way. When you speak, for instance, people do not expect that
you are a word-class orator. You are master of your words only, not of any
situation. But you should have the courage to turn any situation in your favor by
maintaining calm and behaving in the right manner. ''The best way to cheer
yourself is to cheer someone else up''-Mark Twain, one of the greatest American
writers has also written. 'So never frown', always keep yourself light hearted.
Wishing you best of success!
Compiled by Ashwini Wagh 3rd Year E n C
R-TOES’16
ohh Womenia…
A women is a breath,
A women is a need,
She is a wheel to go away with it…..
She makes us feel top of the world,
She protects us and makes every wound heal….
The meaning of sacrifice,
The example of dignity,
She only knows how to rule over the world,
How to manage the things……….
When she is in anger, then no one can win………..
The true examples are durga, chamunda and kali.
Please don’t test her patience, it’s beyond
imagination……….
She acquired more than boys, and completed her
responsibilities……….
Sometimes it seems like coconut,
Which is soft from inside and hard from
outside………………..
The heaven lies in her feet’s,
That’s why she is named as,
A girl, a women, a wife and a mother……….
The all mighty divine…….
Words fall short in describing her….
She is the another name of god……….
Stop killing a man within you, and save her…………….
By- Bhagyashree .H. Vishwakarma
R-TOES’16
God's complain
Once I thought that we share all our thoughts with god,
And complains to him……..
But if god wants to complain so what he will do……….?
And what will be his complain……..!!
Suddenly a voice came from my inner core,
"My dear I am the truth, the power, The way to all the solutions……… I am the strength, the hope, The way to fulfill desire………. But don’t know, why people differentiate me In caste, in religion, in region…….. You don’t know it hurts a lot, When I am divided…….. Why don’t you understand? I am life, I am air, and I am light……… Which can’t be divided, differentiated or avoided……….. That’s why my name is whole mighty, Holy the god………. I am everywhere…………. Please stop hurting me………. "
By-Bhagyashree Vishwakarma
R-TOES’16
(Art section)
Artifact
R-TOES’16
R-TOES’16
Reminiscence
(Alumni section)
R-TOES’16
Prof. Anup Nage Dear students,
It was truly a pleasure to mentor a students like you. We are not destined to be
around with each other but the memories that you guys provided me will remain
deep inside the heart. Every one of you have the dreams to be successful, dream
to be placed in a good organization, dream to achieve something big. I know &
pretty sure you will definitely achieve it but along with all those you should strive
for being a good person, a humble person bcoz people will never remember you
for your success but the character you are. So guys listen the heart, set the goal &
make us proud.
Prof. Lokesh. M. Giripunje
I had the best time of my life at GHRAET just bcoz of you all loving students & cooperative faculties…
Missing you all here @ pune…
Many congratulations to 2016 batch on graduation & one message for all my
students…
“Be a student always bcoz each moment of your life
has some learning in it.”
Name- Akash singh
"A place where I made friends specially my ASAAA group, we nearly organized and managed all the events in our department thankfully by the support and belief of our teachers all were ended with success and an unforgettable memory. Also made a special teacher and student relation with our entire faculty specially
with Anup Sir who was our teacher cum friend. Those were the golden days which
I will always cherish. Really going to miss those days."
Name - Avinash Shahu Batch- 2015
Working at- syntel as trainee engg.
R-TOES’16
Experience about college-
I am from the 2nd batch of GHRAET. When I had started my journey in GHRATE the building was under construction just as my future. Today the college is completed & my career is stared.The faculties of E&C branch were so supportive, enthusiastic & concerned about each student‟s future.
I was so lucky to had teachers like friends. In last yr. Our project quad copter got 50% amount sanctions from college. Last but not the least wants to thanks all my teachers of E&C department for making my journey of being an Engg. Too wonderful.
Name -Arvind Singh.
When I first saw my college I was like "WHAT IS THIS?" The college was under construction and I
found GHRAET written in chalk over a wall. And a thought crossed my mind, 'how am I going to survive here?‟ But I didn't know then that I would be meeting awesome friends and even awesome faculties. I made friends. We are a group of five and we were never seen without each other may it
be attending classes, bunking classes, organizing events or just hanging around. Sure there were many ups and downs but life is always full of them. E&C faculty
was one of the best, formed a special bond with them. N my juniors...Seriously guys u were awesome n I still remember that farewell u organized. It was fabulous. Best phase was the final year. That year I was busy in making project, organizing events and I don‟t remember attending classes in the final year. Never
going to get those days back. They were all memorable moments. Gonna miss my college. Personal special Thanks to the T&P committee for bringing Tech Mahindra to the
campus. So I got employed before leaving the college.
R-TOES’16
ANTARAGNI’16
Annual function
R-TOES’16
R-TOES’16
R-TOES’16
R-TOES’16
Dil se…
R-TOES’16
FINAL YEAR VIEWS
SR NO. NAME PH. NO. MESSEGE FOR COLLEGE
1 PRERNA MASKE 9096436431 I have great pleasure in conveying my best wishes
to all of you .Raisoni college has a reputation for
attracting the best student in their chosen faculty
.It is a matter of great pride that the college
has made consistent progress year on year in
academic and co-curricular activities
I wish you all the best for achieving greater success
and scaling newer heights in your education and
carrier ahead. 2 ROOTUJA KOSARE 9881818763
You can either be proud of graduating from a
prestigious college or you can make your college
proud of having prestigious alumni like you –The
choice is yours. 3 JUHI BISNE 8600244914
College is not just place where you will learn answer
to a lot of life’s question, but also a phase which
will make you question a lot of life’s answers. 4 KOMAL KECHE 8149670035
Colleges is all about building – building friendship ,
building experiences ,building connection , building
relationship and most important building your
future. 5 SHREYANSH
AGRAWAL
7058040391 This four years of journey was memorable .It is a
proud feeling to graduate from one of the best
institute. I wish all the best of luck in the future
and achieve great success. 6 ANKIT G.
HINGNEKAR 9767897535
College is all about a friendship. In this 3 years of
my journey I made lifelong friends and I am proud
to be an Raisonian and proud to be an Chairman of
IETE student forum. 7 NISHCHAY
KHOBRAGADE 8983366212
In this four years of my college, I have made new
friends .This was the best four years of my
education .Happy to be a raisonian.
R-TOES’16
8
9
10
JAYESH GOLAR
GOKUL MEHADIA
MONALI POTE
8390144138
8482950821
9595552752
It was the best and the funniest experiences of my
life. I am proud to be a vice president of
department and learnt many things, made new
friends, enjoyed every moment. Proud to be a
raisonian.
A university is just a group of buildings gathered
around a library.
I have learned one thing, & that’s to quit worrying
about stupid things. You have four years to be
irresponsible here, relax. Work is for people with
jobs. You’ll never remember class time, but you’ll
remember the time you wasted hanging out with
friends. So stay out late. Go with your friends on
Tuesday when you have a paper due on Wednesday.
Spend money you don’t have. Drink till sunrise. The
work never ends, but college does…
I only want to write. And there’s no college for
that except life.
Here rejection is an opportunity for your selection.
College is fun as long as you don’t die.
It was a wonderful experience…
I can’t forget these 3 years of my life…
Not even analyzed how this time has passed like
sand from my hand…
Here not only I got knowledge but also one of my
best & life time friend Bhagyashree…
Love to all my friends & classmates…
Best of luck for future…
R-TOES’16
Placed Students
Batch 2016
Sr. No.
Name of Student Company Sr. No.
Name of Student Company
01
Mr. Jayesh Golar
I Serve Communication Pvt. Ltd.
02
Mr. Shreyansh Agrawal
I Serve Communication Pvt. Ltd.
03
Ms. Juhi Bisne
I Serve Communication Pvt. Ltd.
04
Mr. Ankit Hingnekar
I Serve Communication Pvt. Ltd.
05
Mr. Ananta Chopade
I Serve Communication Pvt. Ltd.
06
Ms. Prerna Mhaske
Bucks Gainer Advisory Services
07
Mr. Ketki Sali
Bucks Gainer Advisory Services
08
Ms. Saurabh Gedam
Bucks Gainer Advisory Services
R-TOES’16
Our Achievers AWARD OF EXCELLENCE:
1. Asst. Professor ‗Mrs. Vibha Bora‘ awarded a certificate of completion for Ph.D .
2. Till date 8 students (from 8th
sem.) are PLACED from Department of Electronics and
Communication.
3. ‗Ms. Bhagyashree Vishwakarma‘ (from 8th
sem.) JUDGED the ‗Fashion show‘, ‗Mr. &
Ms. Navoday‘ & ‗Dance contest‘ at Shankarrao Dhawad Polytechnic college, Nagpur.
4. ‗Mr. Mukul Warghat‘ presented paper in National conference on Advances in
Engineering & won BEST PAPER award.
FIRST PRIZE WINNER:
1. Students presented paper titled as ―Quantum dot automata nanoscale paradigm‖ at
TRPCS-13 held at GHRITW, Nagpur & ‗Ms. Sushma Mahakalkar‘ & ‗Ms. Karishma
Dighorikar‘ won First prize.
2. 8 students presented papers at TRPCS-14 & Ms. Sadaf Khan with paper titled as ―Robust
object tracking using modified mean shift algorithm for processing video‖ won First
prize.
3. Students from GHRAET‘s Department of Electronics and Communication Engineering
participated in Nagpur Science and Engineering fair organized by Raman Science Centre,
Nagpur between 19 to 21 Feb. 2015.Two groups participated in project exhibition:
Group 1:
Project Title: Spy Bird
Group Members: 1. Sunny Verma
2. Surbhi Dhabarde
Group 2:
Project Title: Advance Driver Assistance System Using Wireless Communication
Group Members: 1. Kartik Bhagvat
2. Mandar Lakhe
R-TOES’16
4. Group of 6 student got FIRST prize at Tulsiram Gaikwad college of Engineering for
Quad copter competition, The name of students are as follows
i)Sunny Kumar Varma
ii) Akash Singh
iii) Avinash Shahu
iv) Arvind Singh
v) Arish Balaga
vi) Surbhi Dhabarde
5. Group of 6 student got FIRST prize at GHRAET in project competition, The name of
students are as follows
i)Sunny Kumar Varma
ii) Akash Singh
iii) Avinash Shahu
iv) Arvind Singh
v) Arish Balaga
vi) Surbhi Dhabarde
SECOND PRIZE WINNER:
1. Students presented paper titled as ―Line integration bottling plant using PLC &
SCADA‖ at TRPCS held at GHRIETW, Nagpur & ‗Mr. Atul Jivtode, Mr. Tushar
Harde & Ms. Sagar Jain‘ won Second prize.
2. Students from 6th
sem. participated in Bread board designing competition at
PCE,Nagpur dated 18/02/2013 & a group of ‗Mr. Aresh Balaga & Ms. Surbhi
Dhabarde‘ won SECOND prize.
3. 7 groups from 6th
sem. participated in ppt. competition on Skills & tools for realizing
digital India & a group of ‗Mr. jayseh Golar & Mr. T.V. Shashiraman‘ won SECOND
prize.
R-TOES’16
OUR RECRUITERS
9A BUSINESS CONNECT PVT.LTD.
AMAZON
AMDOCS
ANGLO EASTERN MERCHANT NAVY
ASHOK LEYLAND
BRIDGESTONE TYRES LTD.
CRYPTEX TECHNOLOGIES PVT. LTD.
CYBAGE
CYBERNETICS SOFTWARE PVT. LTD.
DIFFUSION ENGG. LTD.
DRIVE IN TECH.
ENZIGMA SOFTWARE PVT. LTD.
ESENCE IT SOLUTION PVT. LTD.
ETERNUS SOLUTION PVT. LTD.
EXCELLON SOFTWARE PVT. LTD.
GLOBAL LOGIC
HEWLETT-PACKARD
HORIZON TELECOM
IBM INDIA-GBS
INAUTIX TECH.(I) PVT. LTD.
INDIAN ARMY
INDIAN NAVY
INFOSYS
JINDAL STEEL & POWER
K & J PROJECTS PVT. LTD.
KLOUD DATA
KRATIN MOBILE
L & T INFOTECH
MINDSCRIPTS
MPHASIS
NITOR INFOTECH
NOVATECH SOFTWARE PVT. LTD.
NTT DATA
PARAMATRIX TECH. PVT. LTD.
PERCEPT WEB SOLUTION PVT. LTD.
PERSISTENT SYSTEM LTD.
PLAN EDGE
POLARIS CONSULTING & SERVICE .LTD.
POLARIS FINANCIAL TECH. LTD.
POLYCAB WIRES PVT. LTD.
RAMKRISHNA IT CONSULTING PVT. LTD.
SAAMA TECH. INDIA PVT. LTD.
SIEMENS
SMS INFRASTRUCTURE LTD.
SUNFLAG IRON & STEEL CO LTD.
SWIFT INFOCOM (INDIA) PVT. LTD.
SIARAMS
TEACH FOR INDIA
TECH- MAHINDRA
TELEPERFORMANCE
TRIVENI TURBINE
WIND WORLD INDIA LTD.
WIPRO
XL DYNAMICS
YOODLEE INFOTECH PVT. LTD.
ZENSAR TECHNOLOGIES LTD.
R-TOES’16
R-TOES’16
G.H. Raisoni Academy of Engineering & Technology
(Plot no.37-39/I, Shraddha Park, Near Facor steel, off Hingna Wadi
link road, Nagpur-440028)