8/8/2019 RFM Handbook
1/118
Rural FireManagement
Handbook
a
8/8/2019 RFM Handbook
2/118
Experienced, competent andtrusted?
Enough Lookouts, goodadvantage points?Knowledge of crew locations?Knowledge of escape and safetylocations?
Crews are briefed andunderstand the incident andtheir objectives?Fire behaviour and weather areknown?Crews are working from a safe
and secure anchor point?
Radio channels are confirmed?Communications areestablished with all crews,control point, HQ, etc?
Situation updates arecommunicated?Communications required
with the Comcen or RFA?
More than one escape route?
Scouted out, suited to slowestperson (allow for fatigue),known to all the crewmembers?Are marked (night time)?
Natural or constructed area(in burnt area, roadway, etc)?More than one required?Vehicles available and correctlypositioned for escape?Are close enough given the
SAFETY ZONES
LOOKOUTS
AWARENESS orANCHOR POINTS
COMMUNICATIONS
ESCAPE ROUTES
LACES
8/8/2019 RFM Handbook
3/118
Fire Management Handbook
ForewordA wildfire incident in New Zealand can involve manypeople moving from their normal day to day workenvironment into a temporary fire fighting organisation.
The question on some people minds when tasked to arole(s) at a wildfire incident is what is the responsibilitiesof my role(s) and how does this fit with other role(s)involved with the management of the incident.
This handbook provides the detail to each of the wildfireincident roles within the CIMS ICS structure and issimilar in many aspects to the Fireline Handbookpublished by the USA National Wildfire Co-ordinatingGroup.
At a small to medium wildfire incident one person will fillone or more roles as defined in this handbook. As theincident increases in size or complexity the number of roles will reduce until finally a person will be tasked toonly one role.
Addition references and information is also provided onfire behaviour in different fuel types and weather.It is recommended that Rural Fire Authorities issue thishandbook to regular fire fighters and those involved inthe management of wildfires to ensure the maximisationof knowledge on wildfire incident management is knownprior to deployment of resource to wildfires. Thehandbook is also structure in way that it can be placed inthe pocket of fire fighting clothing and referenced whenrequired during an incident.
Murray DudfieldN ti l R l Fi Offi
8/8/2019 RFM Handbook
4/118
8/8/2019 RFM Handbook
5/118
4.1.3 Liaison Officer 74.1.4 Safety Officer 8
4.2 Planning and Intelligence 94.2.1 Planning/Intell Manager 104.2.2 Situation Unit 114.2.3 Resource Unit 124.2.4 Information/Intell Unit 134.2.5 Management Support Unit 13
4.3 Operations 144.3.1 Operations Manager 15
4.3.2 Air Operations 164.3.3 Ground Operations 21
4.4 Logistics 254.4.1 Logistics Manager 264.4.2 Supply Unit 27
4.4.3 Facilities Unit 284.4.4 Ground Support Unit 284.4.5 Communications Unit 294.4.6 Catering Unit 304.4.7 Medical Unit 31
4.4.8 Finance Unit 32
Section 5 Operational Guidelines
5.1 Fire Control Objectives 15.2 Fire Control Strategy 1
5.2.1 Direct Attack 2
5.2.2 In-Direct Attack 35.2.3 Back Burning and Burn-out 4
5.3 Communications 55.3.1 Communication Networks 55.3.2 Communications Plan 8
Page
8/8/2019 RFM Handbook
6/118
5.3.4 Standard IGC Frequencies 105.4 Media Interviews 11
Section 6 Fire Behaviour
6.1 Introduction 16.2 Fire Weather Index (FWI) System structure 26.3 Available Fuel Load (AFL) Forests 46.4 Available Fuel Load (AFL) Grasslands 56.5 Available Fuel Load (AFL) Scrublands 66.6 Headfire Rate of Spread (ROS) Flat Terrain 76.7 Slope Correction Factor 86.8 Dense Scrub Slope Correction Factor 96.9 Headfire Intensity (HFI) Equations 106.10 Headfire Intensity (HFI) Rate of Spread/
Fuel Load Relationship 126.11 Headfire Intensity (HFI) Flame Length
Relationship 156.12 Headfire Intensity (HFI) Fire suppression
effectiveness 166.13 Fire Danger Class Criteria Forest 176.14 Fire Danger Class Criteria Grassland 186.15 Fire Danger Class Criteria Scrubland 196.16 Fire Danger Class Criteria 20
6.17 Simple Elliptical Fire Growth Model 226.18 Wind Speed Estimation 246.19 Abbreviations and Conversions 26
Section 7 Fire Investigation
7.1 On Arrival 1
7.2 Fire Cause Report 2Appendix A - Glossary
Appendix B - Local/Regional Information
Appendix C - Notes
Page
8/8/2019 RFM Handbook
7/118
8/8/2019 RFM Handbook
8/118
1.3 MaintenanceThe handbook is modular in format and loose boundto allow for:
Sections to be revised over time and updated versionsissued. The bindings and page numbering systemallows sections to be replaced. The sections willinclude version control in the form of the issue Month/ Year
Additional local or regional sections to be developedand added to the Handbook (eg local resources andcontact numbers).
An electronic copy will also be maintained on the NRFAWeb Site to enable users to access the Handbook andprint out sections as required.
1.4 ApprovalsContent of this handbook has been:
Developed and/or collated from existing referencematerials; and
Reviewed by fire managers from throughout the ruralsector; and
Approved by the National Rural Fire AdvisoryCommittee.
Section 1 July 2002 Page 2
8/8/2019 RFM Handbook
9/118
2. SafetyRemember:
Safety is no Accident Safety First
Dont take Chances When in doubt, back out
2.1 Personal Safety
ResponsibilityAll personnel have a responsibility for their own personalsafety and for the safety of those personnel they aresupervising.
Every person entering a fireground:
Shall receive a briefing which includes the safety andoperational aspects appropriate to their role at the fire;and
Shall have attained the competency in the FRSITOUnit Standard 3285, or be under the close supervisionof a person who has attained this competency; and
Shall receive a general fire related safety briefing beforeentering the fire ground if they do not have UnitStandard 3285.
Personal Protective Equipment (PPE)Every fire fighter must be dressed in appropriate andapproved gear (PPE) for the task. This includes:
Leather or other boots appropriate to the conditions
Ankle to wrist outer clothing (wool or fire resistant)
Cotton undergarments
8/8/2019 RFM Handbook
10/118
Safety goggles appropriate to work being done
Earmuffs of appropriate grade to be available witheach pump or other noisy environment
Wet weather and protective gear for persons handlingfire chemicals or loading water into aircraft
In some situations gloves will be necessary.
Hydration
Fire fighting can be hot and physically very demanding.The loss of body fluids (de-hydration) through sweatingquickly reduces fire fighter effectiveness and can lead toheat stress. In severe circumstances heat stroke can occur.
To prevent de-hydration it is essential that all fire fighters:
Have access to plenty of fresh drinking water If appropriate to the task, carry drinking water in a
belt water bottle
Drink water frequently to replace lost fluids
Keep themselves in good physical condition
Take regular breaks when working hard
Do not wear heavy clothes, jackets or PPE that is notsuitable for vegetation fire fighting.
Crew Leaders and Supervisors need to:
Monitor that firefighters are carrying and regularlydrinking from their water bottles
Regularly provide their crews with a rest period
Regularly rotate tasks amongst the fire fighters toshare the workload
Monitor fire fighters (and themselves) for anysymptoms of heat stress including:
red, flushed features heavy sweating
Section 2 July 2002 Page 2
8/8/2019 RFM Handbook
11/118
excessive thirst and drinking fatigue, clumsiness, giddiness or anxiety
Stand down any person showing early signs of heatstress from the fireground
Stand down any person from the fireground who isshowing symptoms of heat stress and arrange for themto receive first aid assistance
Arrange the evacuation and urgent medical attentionfor any fire fighter who shows any signs of severe heatstress or the onset of heat stroke (ie the patientbecomes delirious or even unconscious).
Smoke/CO 2 InhalationAlways avoid working in areas where there is high smokelevels or fire intensity. If the air becomes too smoky orhot, keep low to the ground and immediately retreat backalong your escape route to clear air. Goggles can providesome protection and relief from smoke and fine dustparticles.
Radiant HeatRadiant heat is very dangerous and can kill! It isimportant to avoid exposure to radiant heat and to shieldexposed skin from its heat source. Radiated heat cannotpass through solid objects.
always avoid being in any situation where you becomeexposed to the direct heat of a high intensity fire front
always wear the correct PPE and where possible, keep
all exposed skin covered (eg use helmet skirt to coverneck and ears)
if exposed, use any equipment you are carrying (eg ashovel) to shield your face from the heat source
if there is no immediate escape, turn away from the
8/8/2019 RFM Handbook
12/118
EntrapmentEntrapment can be a major threat to fire fighters when afire suddenly and unexpectedly changes direction or rate
of spread. The first responsibilities of all fire fighters is to: Always adopt a safety first attitude. No fire
suppression tasks justify any risk taking or short cutswith safe work procedures
Maintain LACES (refer the next section)
Be aware of the topography, the fuels and fireenvironment
Be alert to and consider any sudden changes totopography, fuels or fire weather.
In the event an entrapment situation arises and it is not
possible to escape to the designated safety zone: Make sure crews stay together
Do not try to out run a fire front up a steep slope
Seek a possible route to get within the burnt area (asthe safest place to be)
If no escape, seek any immediate shelter from theradiant heat (in a ditch, behind a rock, in/undervehicle, etc)
If there is no shelter (or no time), hit the ground andkeep face close as possible to the earth. If possible,cover any exposed skin (ie if wearing gloves, coverears). Take short breaths, the protection of your airwayis essential
Once the fire front has moved past:
account for all personnel move further into burnt area to a safe position
check yourself for any injuries check the condition of other personnel seek immediate assistance as required.
Section 2 July 2002 Page 4
8/8/2019 RFM Handbook
13/118
Experienced, competent andtrusted?
Enough Lookouts, goodadvantage points?
Knowledge of crew locations?Knowledge of escape and safetylocations?
Crews are briefed andunderstand the incident andtheir objectives?
Fire behaviour and weather areknown?
Crews are working from a safeand secure anchor point?
Radio channels are confirmed?
Communications areestablished with all crews,control point, HQ, etc?
Situation updates arecommunicated?
Communications requiredwith the Comcen or RFA?
More than one escape route?
Scouted out, suited to slowestperson (allow for fatigue),known to all the crewmembers?
Are marked (night time)?
Natural or constructed area(in burnt area, roadway, etc)?
More than one required?
Vehicles available and correctlypositioned for escape?
SAFETY ZONES
LOOKOUTS
AWARENESS orANCHOR POINTS
COMMUNICATIONS
ESCAPE ROUTES
LACES CONSIDER
2.2 Laces
8/8/2019 RFM Handbook
14/118
2.3 Watchouts
The 20 situations that shout Watch Out!
Section 2 July 2002 Page 6
1 Fire size is unknown (not scouted and sized up?)
2 Unfamiliar territory (not seen in daylight?)
3 Safety zones/escape routes not identified?
4 Unfamiliar with weather and local factorsinfluencing fire behaviour?
5 No communications link with fire fighters and theircontrol point?
6 Instructions are not clear (unsure of assigned task,objectives, strategy, command chain, etc?)
7 Weather is getting hotter and drier (increasingtemperature, falling humidity?)
8 Wind changes speed and/or direction (sudden changeor un-expected change?)
9 Spot fires occurring across the line
10 Uphill or down wind of the fire front (attempting afrontal assault on fire?)
11 On a steep slope (constructing fireline downhill withfire below, on a hillside where rolling material canignite fuel below?)
12 In rugged terrain (terrain makes escape to safetyzones difficult?)
13 Cant see the fire (are there communications withsomeone that can LACES?)
14 In unburnt vegetation (are there fuels between youand the fire?)
15 Walking through hot ashes?
16 Working alone?
17 Getting tired?
18 Near power lines?
19 Working with machinery?
20 Working with aircraft?
8/8/2019 RFM Handbook
15/118
2.4 Ten Standard Fire Orders
1 F ight fire aggressively but provide for safety first.
2 Initiate all actions based upon current andexpected fire behaviour.
3 Recognise current weather conditions and obtainforecasts.
4 Ensure instructions are given and understood.
5 O btain current information on fire status.
6 Remain in communication with crew members,your supervisor and adjoining forces.
7 D etermine safety zones and escape routes.
8 Establish lookouts in potentially hazardoussituations.
9 Retain control at all times.
S tay alert, keep calm, think clearly and actdecisively.
10
8/8/2019 RFM Handbook
16/118
2.5 Safety BriefingAll tasks should be preceded by a safety briefing. This
may be delivered by a dedicated Safety Officer or by theperson supervising the assignment. The person deliveringthe safety briefing will:
2.6 Use of Vehicles The driver is qualified for the operation of the vehicle
and for the road conditions?
The driver and all passengers are seated and withseatbelts done up. No arms or legs outside the vehicle?
No unsecured equipment or containers within thepassenger area?
All other equipment and tools securely stowed on thevehicle?
All road traffic regulations observed, travelling at asafe speed at all times?
Front seat passenger assisting driver with operation of the radio, lights, siren and as an observer whenbacking up?
1 Identify self. Who you are, what is your role/ responsibility.
2 Define the assignment and discuss objectives andstrategy.
3 Identify the potential hazards and apply thestandard Fire Orders, Watch Outs and LACES.
4 For each hazard, discuss the danger signs and
identify the avoidance and mitigation measures tobe followed to minimise the risk.
5 Discuss fire fighter health and safety issues.
6 Ask for questions or any clarification required?
Section 2 July 2002 Page 8
8/8/2019 RFM Handbook
17/118
Vehicle securely parked in a safe position on arrival atthe fire (positioned to be able to quickly move awayfrom the fire and clear of other arriving or passingtraffic)?
Vehicle not locked or ignition key removed?
2.7 Use of Machinery Machines with the required safety rating for use in the
vegetation cover conditions
Operator(s) are fully briefed on their task, any hazards
and safety issues Machines working at night are equipped with suitable
flood lighting equipment
Communications with the machines and established(operator with a radio and headphones or assigned
Crew Leader with radio) All personnel will:
watch out for rapid and erratic movement of amachine
attract the operators attention before approachinga machine
never mount or dismount a moving machine keep away from the downhill side of an operating
machine keep at least two tree lengths away from an
operating machine.
8/8/2019 RFM Handbook
18/118
8/8/2019 RFM Handbook
19/118
Fixed Wing Never approach an aircraft forward of the engine and
propeller(s). Note: This is the reverse of the approachfor helicopters
Keep well clear of propellers at all times (whether
spinning or not).
Helicopters Keep well clear of the main and tail rotors at all times
Approach and leave the helicopter on the down hillside (ground slope can reduce the overhead rotorclearance)
Carry all tools and equipment at or below waist height
Enter or leave the helicopter in a smooth, steadyfashion, dont make sudden movements
Crouch down with back to helicopter if temporarilyblinded by dust.
2.9 First AidFirst Aid is the first assistance or treatment given to acasualty for any injury or sudden illness before the arrival
of an ambulance or qualified medical expert. It mayinvolve improvising with facilities and materials availableat the time.
First Aid treatment is given to a casualty:
To preserve life
To prevent the condition worsening To promote recovery.
8/8/2019 RFM Handbook
20/118
The responsibility of the First Aider is to:
Assess the situation without endangering their own life
Identify the condition(s) that the casualty(s) is/aresuffering from
Determine priorities (where there are multiple injuriesand/or multiple casualties)
Give immediate and appropriate treatment as thesituation and resources allow
Arrange without delay the attendance of ambulanceservices and/or the transfer of the casualty(s) to adoctor or hospital
Briefing the ambulance/doctor/hospital on the patientand any first aid given
Documenting the details of what occurred and theactions taken for the purposes of a formal incidentreport.
2.10 CPR
Remember consider personal safety before commencingthe ABCs. Assess the situation:
What might have caused the casualty to collapse(power wires, poisoned, gas build up, etc)?
Does the hazards still exist?
What needs to be done to remove the hazard and makeit safe to attend the casualty?
A Airway1. Assess the casualty, determine their degree of
responsiveness
2. Call for help (send for an ambulance)
3. Position the casualty
4. Open the airway, use head tilt, chin lift.
Section 2 July 2002 Page 12
8/8/2019 RFM Handbook
21/118
8/8/2019 RFM Handbook
22/118
5. Re-assess the casualty by checking for pulse (5 secs).If no pulse, continue cycle of 2 breaths and 15compression stopping every few minutes to check for
pulse and spontaneous breathing. Do not interruptCPR for more than 7 secs unless unavoidable.
6. If pulse returns, check breathing.If no breathing, continue with 12 breaths/min whilemonitoring pulse.If breathing and pulse, continue to monitor patient
closely.7. If possible, continue to advise responding medical
services of the casualtys status.
Controlling Blood Loss:
Direct Pressure: Apply pressure directly to the wound.Use clean sterile dressing if possible. Bind firmly andimmobilise injured part (maintaining this at higherelevation if possible). Maintain pressure with hands if no dressing or improvised material available
In-Direct Pressure: Where direct pressure does not
control bleeding, it may be possible to restrict the flowof blood loss by applying pressure to the Brachial(upper/inner arm) or Femoral (upper/inner thigh)arteries.
Section 2 July 2002 Page 14
8/8/2019 RFM Handbook
23/118
3. Initial Attack
3.1 Definition of Initial AttackInitial attack is the action taken by the resources that are
first to arrive at an incident. All wildland fires that arecontrolled by suppression forces undergo initial attack.The number and type of resources responding as theinitial attack varies depending upon fire danger, fuel type,values at risk and other factors. Generally initial attackinvolves relatively few resources and the incident size isstill small at this time.
The Initial Attack may comprise a single crew led by aCrew leader or multiple crews from one or more agencies.On arrival, the Crew Leader or the most senior personfrom the lead or first arriving agency will assume controlas the Initial Attack Incident Controller.
3.2 Responding to a Reported IncidentObtain the following minimum information from theCommunications Centre (or the persons reporting theincident):
Nature of the incident and what is burning?
Location of the fire (incl grid reference if required)?
Rural Fire Authority jurisdiction?
Best access?
Details of any other responding services?
Note: If possible, notify the NZ Fire Service Comcen of the reportedincident if the call has not originated from them.
8/8/2019 RFM Handbook
24/118
3.3 Enroute to the Incident
Travel safely, dont speed!
(i) Consider what you know about the fire area:
Fuels and terrain? Access? Barriers to fire spread?
Ownership? History of fire in the area? Resources en-route? Backup resources available?
(ii) Think about Fire Behaviour:
Consider fuels, topography and weather? How will this fire burn compared to others in the
area? Is the fire danger increasing or decreasing? Check the wind, is it the forecast direction and
speed? Any indicators of erratic fire behaviour (whirl
winds, gusty winds, etc)? Are unfavourable weather changes forecast?
(iii) When Approaching the Fire: Is the smoke column consistent with what was
expected given the conditions (ie colour, height,volume, direction)?
Watch for people leaving the fire area and notedown vehicle registrations and/or any other
identifying features or information Use caution when approaching the scene Identify escape routes Look for alternate access routes.
Section 3 July 2002 Page 2
8/8/2019 RFM Handbook
25/118
3.4 Arriving at the Fire Advise the RFA, HQ and/or NZFS Comcen by radio or
phone of the arrival time
Position vehicles in a safe, accessible location pointingaway from the fire with the windows closed, doorsunlocked and keys in the ignition
Take control of the incident and determine the incidentcontrol point location
Size up the fire
Determine the immediate incident objectives
Consider any immediate need to request or put onstandby additional resources (eg helicopter, rural fireunits, personnel, etc)
As appropriate, advise the RFA or the Comcen, of thesituation, your intended action and what additionalresources are required.
Note: If they have not already been alerted, advise the Comcen of theincident and its location (as they may be receiving 111 calls).
3.5 Getting to workStep 1:Determine an initial attack plan immediately on arrival atthe fire. This should be done quickly and be based uponthe initial size-up of the fire. The intent is to get workstarted in suppressing the fire as soon as possible.
Consider and identify:
The location of escape routes and safety zones? How topography will affect fire behaviour?
What fuels are involved and how they will effect firebehaviour?
The current weather conditions (incl FWI) and how
8/8/2019 RFM Handbook
26/118
Any properties at risk?
Good anchor points or defensible lines such as roads,fire breaks, burned area, etc?
The availability of water?
Where to attack fire (eg Head or Flank)?
How to attack fire (Direct or In-Direct)?
Additional resources required (and how long beforethey arrive)?
Any evidence of where and how the fire may havestarted (and protect the point of origin).
Step 2:Brief the crew and begin work.
Ensure that the crews understands their workassignment
Give crews safety briefing (hazards, LACES, etc)
Provide the Comcen or RFA HQ with a furtherinformative message on size of the fire and the actionundertaken.
Step 3:After resources have been deployed and control actionstarted:
Continue assessment of the fire
Continue to delegate roles as the incident develops andresources arrive
Gather information for determining fire cause
Continue to give informative messages to the Comcenand/or RFA HQ on an hourly basis.
Step 4:Preview or review the following Initial Attack Checklist asneeded or as conditions change:
Section 3 July 2002 Page 4
8/8/2019 RFM Handbook
27/118
3.6 Initial Attack Checklist
Has control and an Incident Control Point beenestablished?
Have you sized up the fire?
Do you have a current weather forecast for thelocation?
Is the observed weather consistent with the forecast?
Do you have the FWI values for the area?
Is the fire behaviour consistent with fuels, weatherand topography?
Can you control the fire with the resources available(on the fire ground or soon to arrive) under theexpected conditions?
Have you developed the incident objectives and aplan to attack the fire? (Direct or In-Direct, anchorpoints, escape routes, priority areas, etc).
Have the incident objectives and plan beencommunicated to all personnel assigned to theincident (including new arrivals)?
Lookouts in place or can you see all of the fire area?
Can you communicate with everyone on the fireground (incl the RFA and/or Comcen)?
Escape routes and safety zones are established. If you are working from the black, is it completelyburned and without a re-burn potential?
Have all personnel been briefed on safety and theirassigned tasks?
Safety, LACES and standard fire orders being followed?
Consider each of the following
8/8/2019 RFM Handbook
28/118
Will you be able to control the fire within 2 hours?If not, have you advised the fire authority?
Is the size of the incident within your capability andresources to manage (Span of Control) and if not,have you advised the fire authority assistance isrequired?
Do you have a complete list of resources on thefireground and currently en-route?
Have you established a log or record of actions takenat the incident?
If the answer to any of the above questions is No (x), youMUST take corrective action immediately.
3.7 Transition (Initial to ExtendedAttack)
Early assessment and size up is required to determine if the fire will be controlled within the initial attack periodand available resources. This will include consideration of:
Values threatened Environmental issues
Cultural or heritage issues
Fire behaviour and fire potential (size of fire, intensity,rate of spread, fuels, weather, etc)
Potential control problems and hazards (terrain, access,night fall, FWI, etc)
Resources currently available or en-route
Control strategy(s) required.
Section 3 July 2002 Page 6
8/8/2019 RFM Handbook
29/118
8/8/2019 RFM Handbook
30/118
Logistics:
ICP and Staging Areas
Communications
Catering
Traffic control.
Planning:
Resources currently available/en-route
Time current resources have been deployed Availability of maps, aerial photos, etc
Current weather info
Situation and incident predictions.
3.8 Fire Incident Levels
Small to medium fire that will be contained bythe Initial Attack resources. Can be controlledwithin 12 hours.
Medium to large fire the requires extendedattack and involve multiple agencies.High values at risk, possibly including those of environmental, cultural and heritage significance.May take up to 12-24 hours to controlled.IMT would be implemented using localresources.
Large and complex fires that may take severaldays to control and suppress. Likely to occurat periods of Very High or Extreme fire weatherconditions with the potential for extreme firebehaviour. Significant values are at risk withlarge suppression costs likely. Level 3 may also
apply when significant environmental, culturalor heritage values at risk. A National IncidentManagement Team is likely to be required(supported by local resources).
Level 1
Level 2
Level 3
Section 3 July 2002 Page 8
8/8/2019 RFM Handbook
31/118
4. Incident Management
Incident Management Defined:
...A process for organisations with
different legal, geographic and functional responsibilities to work together effectively...
CIMS/ICS: Is modular and adaptable to any incident type
Is suitable for use regardless of the jurisdiction or
agency involved Employs common organisational structure with a
manageable span of control
Utilises common command structures and consolidatedaction-planning
Utilises common terminology and integratedcommunications
Has clear lines of accountability and authority.
Incident Management Team: Is in accordance with the CIMS/ICS model
Sets out a recommended structure for the formation of a team and the roles and responsibilities of each teammember
Is scaled to the needs of the incident with the actualstructure implemented determined by the size and/or
complexity of the incident In small to medium incidents, one team member may
be responsible for the roles/responsibilities of severalpositions (eg one person may be delegated theresponsibilities for the provision of Planning/Intellservices in a small incident)
8/8/2019 RFM Handbook
32/118
4.1 Control
IncidentController
Information
Liaison
Safety
PlanningIntelligence
Manager
OperationsManager
LogisticsManager
Deputy IC
SituationUnit
ResourceUnit
Info/IntellUnit
MgmtSupp Unit
Air DivisionCommander
Air Attack Supervisor
Lead Pilot
Aircraft
Air SupportSupervisor
DivisionCommanders
SectorSupervisors
CrewLeaders
FireFighters
SupplyUnit
FacilitiesUnit
CommsUnit
FinanceUnit
Medical
Unit
CateringUnit
Ground SuppUnit
Section 4 July 2002 Page 2
8/8/2019 RFM Handbook
33/118
Incident Controller Overall management of the incident.
Planning/Intelligence Gathering and analysing information
Predicting incident behaviour
Planning how to control the incident
Maintaining resource status
Preparation and documentation of the Incident
Action Plan.
Operations The tactical activities in accordance with the IAP
Identifying resource requirements
Determining operational structures.
Logistics Providing and maintaining facilities
Provision of services, materials and supplies.
8/8/2019 RFM Handbook
34/118
4.1.1 Incident Controller
IncidentController
Information
Liaison
Safety
PlanningIntelligence
Manager
OperationsManager
LogisticsManager
Deputy IC
All incidents must have an Incident Controller appointed.The IC is determined by Statute, Agency Protocols and/orAgreements. The Incident Controllers responsibility isthe overall management of the incident.
The Incident Controller may appoint a deputy, who maybe from the same agency, or from an assisting agency.Deputies may also be used at section levels of the CIMSorganisation. Deputies should have the samequalifications as the person for whom they work as theymust be ready to take over that position at any time.
Major Responsibilities of the IncidentController:
(i) Assume Control Receives an initial briefing from the Lead agency
and/or the previous Incident Controller Confirms and formalises hand over of incident and
assumption of control including delegations andauthorities.
Section 4 July 2002 Page 4
8/8/2019 RFM Handbook
35/118
Assesses the situation and confirms or establishesthe immediate priorities (safety as #1 priority)
Reviews and/or prepare plans for the availableresources prior to the first IMT planning session
Ensures that adequate welfare and safety measuresare in place
Considers appointment of a Deputy or Aide asrequired.
(ii) Organise and Delegate Establishes an Incident Control Point
Establishes an appropriate organisation for the sizeof the incident Establishes CIMS management structure (refer
CIMS manual) Determines the requirements for support agencies
and requests their attendance
Appoints, briefs and tasks the IMT staff.
(iii) Plan Establishes the Incident Objectives Initiates the incident planning cycle, schedule and
attends IAP planning meetings Reviews plans and participates in planning meetings
as required Approves the Incident Action Plan.
(iv) Manage Manages the activity for all command and general
staff maintaining the Management by Objectivesprinciple
Co-ordinates with key people, agencies and officialsand conducts briefings as required
Ensures that systems are in place to effectively
8/8/2019 RFM Handbook
36/118
Ensures that accounting systems are in place toapprove, record and track expenditure
Ensures that a log is maintained by all key functions
of decisions, actions and other events and outcomes.
(v) Inform Authorises the release of information to the news
media Reports to and keeps the lead agency informed of
incident status.(vi) Demobilise
Approves the release of resources De-briefs following incident or shift Prepares a comprehensive incident report for the
responsible agency.
4.1.2 Information OfficerThe Information Officer is responsible for handling
queries and developing and releasing information aboutthe incident to the news media, to incident personnel, andto other appropriate agencies and organisations.
Only one Information Officer will be assigned for eachincident. The Information Officer may have assistants asrequired.
The Information Officer reports to the Incident Controllerand has the following major responsibilities:
Establishing a point of contact and/or a media centre
Advising the Incident Controller on media strategy
Co-ordinating with other agencies to ensure aconsistent message to media
Developing material of interest to the media or for usein media briefings
Section 4 July 2002 Page 6
8/8/2019 RFM Handbook
37/118
Obtaining Incident Controllers approval of mediareleases
Informing media and conducts media briefings
Handling all further queries for information by themedia
Arranging for media tours and other interviews orbriefings that may be required
Monitoring news reports (all media), advising IC andpassing relevant information on to Planning, etc
Maintaining a log of media releases, media reports,decisions, actions and other activities.
4.1.3 Liaison OfficerMost incidents are multi-agency and will require theestablishment of the Liaison Officer position to the IMT.
The Liaison Officer is the contact for the personnelassigned to the incident by assisting or co-operatingagencies. These are personnel other than those on directtactical assignments.
Other agencies involved in the incident may also need toappoint inter-agency/liaison representatives.
The Liaison Officer reports to the Incident Controller andhas the following major responsibilities:
The primary contact point for inter-agencyrepresentatives
Maintaining a list of assisting and co-operatingagencies and agency representatives
Assisting in establishing and co-ordinating interagencycontacts
Keeping agencies supporting the incident fullyinformed of the incident status
8/8/2019 RFM Handbook
38/118
Participating in planning meetings, providing currentresource status, including limitations and capability of assisting agency resources
Maintaining a log of activities and actions.
4.1.4 Safety OfficerThe Safety Officers function is to develop andrecommend measures for assuring personnel safety, and toassess and/or anticipate hazardous and unsafe situations.Only one Safety Officer will be assigned for each incident.The Safety Officer may have assistants representingagencies. Safety assistants may have specificresponsibilities such as air operations, hazardousmaterials, etc.
The Safety Officer reports to the Incident Controller andhas the following major responsibilities:
Participating in planning meetings
Identifying hazardous situations associated with theincident
Reviewing the Incident Action Plan for safetyimplications
Prepare safety messages
Giving safety briefings
Investigating and reporting on any accidents that occur
within the incident area Assigning assistants as needed
Reviewing and approving the medical plan
Maintaining a log of activities and actions.
Section 4 July 2002 Page 8
8/8/2019 RFM Handbook
39/118
4.2 Planning and Intelligence
PlanningIntelligence
Manager
Situation Unit
Resource Unit
Info/Intell Unit
Mgmt Supp Unit
The Planning/Intelligence Section collects, evaluates,processes, and disseminates information for use at theincident. There may be up to five units within thePlanning/Intell Section that can be activated:
Situation Unit
Resources Unit Information/Intell Unit
Management Support Unit.
The Planning/Intell Manager will appoint a Supervisor to
each unit as activated. The Supervisor will staff the unitwith additional personnel as required given the size orcomplexity of the incident.
8/8/2019 RFM Handbook
40/118
4.2.1 Planning/Intell Manager
The Planning/Intelligence Manager reports to the Incident
Controller and has the following major responsibilities: Obtaining a briefing from the Incident Controller
Organising and implementing the Planning/IntellSection including:
the Section, its facilities and resources
the requirements for supporting units appointing, briefing and tasking Unit Officers
establishing the information requirements andreporting schedules for each unit.
Establishing information collection activities
Eg, weather, environmental, fire behaviour, etc Managing the analysis and dissemination of situation
information about the incident (maps, display boards,etc)
Organising planning meetings
Providing an analysis of incident information andadvises on alternative strategies
Supervising the preparation of the Incident Action Plan
Determining the need for any specialised technicalresources in support of the incident
Providing periodic predictions on incident potential Reporting any significant changes in incident status
Supervising the preparation of an IncidentDemobilisation Plan
Maintaining records of resource status and location
Maintaining a section log of decisions, actions andother activities.
Section 4 July 2002 Page 10
8/8/2019 RFM Handbook
41/118
4.2.2 Situation Unit
The Situation Unit Officer leads this unit reporting to thePlanning/Intell Manager. The unit is responsible for:
Establishing information flows
Gathering of situation information from the incidentground
Obtaining met data and weather forecast information.
Predicting fire behaviour and potential
Developing alternative strategies
Organising and analysing information
Identifying environmental information and anyenvironmental issues
Establishing mapping services and transferringsituation information to maps
Preparing, distributing and displaying situation reportsand associated fire plot and map information
Developing and distributing the Incident Action Plan
Monitoring implementation and progress of theIncident Action Plan
Conducting briefings for the Planning/Intell Manager,the Information Officer and the IMT
Advising on safety threats
Participating in planning meetings and providing
technical advice Preparing a de-mobilisation plan
Maintaining record of information gathered and a UnitLog of activities.
8/8/2019 RFM Handbook
42/118
4.2.3 Resource UnitThe Resource Officer leads this unit reporting to thePlanning/Intell Manager. The unit is responsible for:
Establishing and maintaining a resource managementsystem
Identifying and recording the location and status of allresources including personnel, appliances, plant andmachinery:
deployed (allocated tasks and working)
available (on incident ground and ready)
out of service (on incident ground but available dueto resting, unserviceable, other)
en-route (deployed to incident but not yet arrived).
Establishing Check-in Points at staging or assemblyareas to gather resource and status information
Displaying organisation chart and resource statusinformation
Providing resource information to the IMT as required
Identifying resources required for Incident Action Plan
Identifying requirements for specialist or technicalresources
Setting up shift assignments
Maintaining a Unit Log of activities.
Section 4 July 2002 Page 12
8/8/2019 RFM Handbook
43/118
4.2.4 Information/Intell UnitThe Information Officer leads this unit reporting to thePlanning/Intell Manager. The unit is responsible for:
Compiling general information regarding the incidentcause, size, current situation, resources, losses, assetsthreatened and other matters of general interest
Preparing media releases for the Information Officer(or IC if an Information Officer hasnt been appointed)
Distributing media releases if Information Officer hasnot been appointed
Liasing with Information Officer, if appointed
Answering telephone calls from public (ManagementUnit may assist)
Maintaining a Unit Log of activities.
4.2.5 Management Support UnitThe Management Support Officer leads this unitreporting to the Planning/Intell Manager. The unit isresponsible for:
Setting up the Incident Control Point Providing support personnel to other IMT units
Providing administrative services for the IMT (typing,photocopying, records management, etc)
Providing operators (computers, telephones, faxes,
radios, etc) Maintaining a Unit Log of activities.
8/8/2019 RFM Handbook
44/118
4.3 Operations
OperationsManager
Air DivisionCommander
Air Attack Supervisor
Lead Pilot
Aircraft
Air SupportSupervisor
DivisionCommanders
SectorSupervisor(s)
CrewLeader(s)
FireFighter(s)
Division 2
Division 3, etc
The Operations Section is responsible for the safemanagement of all tactical operations at an incident.The Incident Action Plan sets out the necessary guidancefor the tactics. The size and structure of the OperationsSection is determined by:
The size and complexity of the incident
The span of control required
The geography of the incident ground
The hazards
The objectives and strategies set out in the IAP
The resources or equipment required.
Section 4 July 2002 Page 14
8/8/2019 RFM Handbook
45/118
4.3.1 Operations ManagerThe Operations Manager reports to the IncidentController and has the following major responsibilities:
Obtaining a briefing from the Incident Controller
Ensuring safety and welfare of personnel Participating in planning meetings
Developing the operations component of the IncidentAction Plan
Managing and supervising the Operations Section in
accordance with the IAP including: determining Operations Section structure
appointing, briefing and tasking Operations staff
establishing staging area(s) Note: Logistics providesand Operations manages this facility
identifying resource needs assembling and deploying resources.
Maintaining close contact with subordinate positions
Requesting additional resources to support tacticaloperations
Providing regular Situation Reports
Initiating release of resources from active assignments(not the incident)
Making or approving changes to the Incident ActionPlan during the Operational Period as necessary
Maintaining close communications with the IncidentController and the other members of the IMT
Maintaining section log of decisions, actions and otheractivities.
8/8/2019 RFM Handbook
46/118
8/8/2019 RFM Handbook
47/118
Air Division CommanderThe Air Division will be established as a separateorganisational activity by the Operations Manager whenconsidered necessary. Until this occurs, any air operationsare the responsibility of the Operations Manager.
When established, the Air Division has two main areas of responsibility:
(i) Supervising the air attack; and(ii) Providing logistical support for the aircraft.
The Air Division Commander reports to the OperationsManager and has the following major responsibilities:
Obtaining a briefing from the Operations Managerand agreeing immediate strategy and tactics for airoperations
Monitoring all activities of the Air Division to ensuresafe operations are maintained at all times
Managing the overall air operations including:
Air Attack
Air Support.
Appointing, briefing and instructing Air Support and/ or Air Attack Supervisors
Preparing the tactical planning for Air Operations
Providing input into the Incident Action Plan andspecialist aviation advice to the IMT
In consultation with the Air Attack Supervisor,determining the assignments for aircraft operations
Approving aircraft ordering
Approving aircraft release
Establishing procedures for emergency reassignment of
8/8/2019 RFM Handbook
48/118
8/8/2019 RFM Handbook
49/118
Briefing pilots on assignments and safety
Monitoring pilot and aircraft effectiveness andperformance in accordance with set objectives
Making tactical recommendations to DivisionCommanders
Informing Air Division Commander of tacticalrecommendations affecting the IAP
Reporting on air attack activities to Air DivisionCommander
Maintaining air to fire ground communications andliaison
Terminating air operations as considered necessary orif pilots recommend this on safety grounds
Reporting on incidents/accidents
Maintaining air attack log.
Air Support SupervisorAir Support is responsible for organising and managingground based support for aircraft. This includes fuels,maintenance, retardant mixing and loading, keeping
records of aircraft activity, providing enforcement of safety regulations.
The Air Support Supervisor reports to the Air DivisionCommander
Major Responsibilities of the Air Support Supervisor:
Receive briefing from the Air Division Commander Safety of air support operations
Participating in air operations planning
Requesting special air support items from theappropriate sources (via Logistics Section if
8/8/2019 RFM Handbook
50/118
Establishing air support facilities including:
locations (Airports, Airbases, Airstrips, Heliports,Helibases)
support personnel (loading, marshalling, safety,security, retardant handling, etc)
pilot information services
additional communications services
dust abatement
fuels
retardants and mixing
crash-rescue services
ground safety provisions.
Co-ordinating support activities with the Air AttackSupervisor
Informing Air Division Commander of air supportrequirements affecting the IAP
Reporting on air support activities to Air DivisionCommander
Maintaining records of aircraft and aircraft movementsas well as other activities of Air Support.
Section 4 July 2002 Page 20
8/8/2019 RFM Handbook
51/118
4.3.3 Ground Operations
OperationsManager
AirOperations
DivisionCommander(s)
SectorSupervisor(s)
CrewLeader
CrewLeader
CrewLeader
FireFighters
FireFighters
FireFighters
Division Commander(s)The Operations Manager may appoint one or moreground attack Division Commanders depending on:
The size and complexity of operations;
The requirements of the IAP; and
The incident objectives and strategies.
The Division Commanders report to the OperationsManager.
Major Responsibilities of a Division Commander:
Obtain briefing from the Operations Manager
Ensuring that the safety of all fire fighters and any
8/8/2019 RFM Handbook
52/118
Supervising Division operations
Co-ordinating activities with other Divisions
Developing tactics to implement incident or divisionalstrategies
Attending incident planning meetings at the request of the Operations Manager
Reviewing Division assignments and report status tothe Operations Manager
Informing Resource Unit (if established) of statuschanges of resources assigned to the Division
Assigning specific work tasks to Sector Supervisors
Monitoring and inspecting progress and make changesas necessary
Resolving tactical assignment and logistics problemswithin the Division
Keeping the Operations Manager informed of hazardous situations and significant events
Maintaining a Division Log of decisions, activities andevents.
Sector Supervisor(s)Each Division may establish one or more sectors of operation. Each sector will be managed by a SectorSupervisor.
The major responsibilities of a Sector Supervisor are:
Obtain a briefing from the Division Commander
Ensuring that the safety of all fire fighters and anyother personnel is the first priority in all sectoroperations
Undertake specific assignments in a sector as directedby the Division Commander
Section 4 July 2002 Page 22
8/8/2019 RFM Handbook
53/118
Delegate sector assignments to Crew Leaders and brief them on safety, strategy and tactic
Monitor sector assignments and work progress keepingthe Division Commander informed of status
Consider and recommend to the Divisional
Commander any changes to tactics as conditions andfire behaviour require
Ensure that adequate communications are establishedand maintained within the Sector and to the Division
Maintain Sector Log of tasks, crews, equipment, time,
etc.
Crew Leader(s)Each Sector Supervisor may have one or more crewsassigned to specific tasks. Each crew will be led by aCrew Leader.
The major responsibilities of a Crew Leader are: To get a briefing from the Sector Supervisor on the
incident and the specific crew assignment (strategy andtactics)
To ensure the safety and welfare of fire fighters
working in the assigned crew To brief the crew on the assigned task ensure that
LACES are identified, understood and maintained
Obtaining the necessary equipment and supplies asrequired for the task
Keeping the Sector Supervisor informed of the statusand progress of the assigned task
Consider and recommend to the Sector Supervisor anychanges to tactics as conditions and fire behaviourrequire
A f ll i d b h
8/8/2019 RFM Handbook
54/118
Firefighters and other personnelFirefighters and other personnel will be formed into crewsunder the direction of a Crew Leader for assigned tasks.
The major responsibilities of all Firefighters and othercrew personnel are:
To get a briefing from the Crew Leader on the incidentand the specific crew assignment (strategy and tactics)
To understand their crews assignment and their own
role within the crew To wear the appropriate PPE for the crew task and
observe safe work practices at all times
Observe the directions of the Crew Leader and advisehim/her promptly in the event that they have any
concerns re their own safety or wellbeing (or the safetyor wellbeing of others)
Remain with the assigned crew at all times and strictlyfollow checkin/checkout procedures
To attain the minimum of Unit Standard 3285 and befamiliar with LACES, Watch Outs and the 10 FirelineOrders.
Section 4 July 2002 Page 24
8/8/2019 RFM Handbook
55/118
4.4 Logistics
SupplyUnit
FacilitiesUnit
CommsUnit
FinanceUnit
MedicalUnit
CateringUnit
Ground SuppUnit
LogisticsManager
8/8/2019 RFM Handbook
56/118
8/8/2019 RFM Handbook
57/118
Provides logistical input to the Planning Section inpreparing the Incident Action Plan (eg Comms Plan,Transport Plan, Medical Plan, etc)
Reviews and provides input to the CommunicationsPlan and Medical Plans
Advises Operation of resource availability Identifies and plans incident service and support
requirements
Processes requests for additional resources
Oversees the demobilisation of Logistics Section
Maintains section log of decisions, actions and otheractivities.
4.4.2 Supply UnitThe Supply Unit is responsible for ordering, receiving,
processing and storing all incident-related resources. Alloff-incident resources will be ordered through the SupplyUnit, including tactical and support resources (includingpersonnel) and all expendable and non-expendablesupport supplies.
Major Responsibilities of the Supply Unit:
Providing input to Logistics Section planning activities
Planning for the provision of personnel, equipment,supplies and other resources as required/requested bythe IMT
Ordering, receiving, distributing and storing suppliesand equipment
Maintaining an inventory of supplies and equipment
Servicing reusable equipment, as needed
Maintaining detailed records of all orders, issues,receipts deliveries invoices etc
8/8/2019 RFM Handbook
58/118
4.4.3 Facilities UnitThis unit is responsible for set up, maintenance anddemobilisation of all incident support facilities. TheFacilities Unit will also provide security services to theincident as needed.
Major Responsibilities of the Facilities Unit:
Participating in Logistics Section planning activities
Determining requirements for each incident facility
Preparing layouts of facilities, inform appropriate unitleaders
Activating incident facilities
Obtaining and supervising personnel to operatefacilities
Providing security services
Providing facility maintenance services, e.g., sanitation,lighting, etc
Demobilising incident facilities
Maintaining a Unit Log of activities.
4.4.4 Ground Support UnitThe Ground Support Unit is primarily responsible for themaintenance, service, and fuelling of all mobile equipment
and vehicles, with the exception of aviation resources.The Unit also has responsibility for the groundtransportation of personnel, supplies and equipment, andthe development of the Incident Traffic Plan.
Major Responsibilities of the Ground Support Unit:
Participating in Support Unit and Logistics Sectionplanning activities
Providing support services (fuelling, maintenance, andrepair) for all mobile equipment and vehicles
Section 4 July 2002 Page 28
8/8/2019 RFM Handbook
59/118
Identifying requirements for maintenance and repairsupplies (e.g., fuel, and spare parts)
Providing support for out-of-service equipment
Developing the Incident Traffic Plan
Maintaining an inventory of support andtransportation vehicles
Recording time use for all incident-assigned groundequipment (including contract equipment)
Updating the Resources Unit with the status (locationand capability) of transportation vehicles
Maintaining incident roadways as necessary Maintaining a Unit Log of other activities.
4.4.5 Communications UnitThe Communications Unit is responsible for developingplans for the use of incident communications equipmentand facilities; installing and testing of communicationsequipment; supervision of the Incident CommunicationsCentre; and the distribution and maintenance of communications equipment.
Major Responsibilities of the Communications Unit:
Advising on communications capabilities/limitations
Preparing and implementing the Incident RadioCommunications Plan
Establishing and supervising the IncidentCommunications Centre and Message Centre
Establishing telephone, computer links, and publicaddress systems
Establishing communications equipment distributionand maintenance locations
8/8/2019 RFM Handbook
60/118
Overseeing the distribution, maintenance and recoveryof communications equipment, e.g., portable radios
Maintaining a register of communications equipmentand equipment issued and received
Providing technical advice on:
communications systems
geographical limitations
equipment capabilities
amount and types of equipment available.
Maintaining a Unit Log of other activities.
4.4.6 Catering UnitThe Catering Unit is responsible for supplying the foodneeds for the entire incident, including all remotelocations as well as providing food for personnel unableto leave tactical field assignments.
Major Responsibilities of the Catering Unit:
Determining food and water requirements Determining method of feeding to best fit each facility
or situation
Ordering required food and potable water from theSupply Unit
Maintaining an inventory of food and water Maintaining food service areas, ensuring that all
appropriate health and safety measures are beingfollowed
Supervising caterers, cooks, and other Catering Unitpersonnel as appropriate
Maintaining a Unit Log of other activities.
Section 4 July 2002 Page 30
8/8/2019 RFM Handbook
61/118
4.4.7 Medical UnitThe Medical Unit will develop an Incident Medical Plan(to be included in the Incident Action Plan); developprocedures for managing major medical emergencies;provide medical aid; and assist the Finance/
Administration Section with processing injury-relatedclaims.
Note that the provision of medical assistance to the publicor victims of the emergency is an operational function,and would be done by the Operations Section and not bythe Logistics Section Medical Unit.
Major Responsibilities of the Medical Unit:
Determining level of emergency medical activities priorto activation of Medical Unit
Acquiring and managing medical support personnel
Preparing the Medical Emergency Plan
Establishing procedures for handling serious injuries of responder personnel
Responding to requests for:
medical aid
medical transportation medical supplies.
Maintaining detailed records of any medical assistanceprovided and a Unit Log of other activities.
8/8/2019 RFM Handbook
62/118
4.4.8 Finance UnitThe Finance Unit is responsible for managing all financialaspects of an incident.
Major Responsibilities of the Finance Unit:
Collect and record all cost data
Provide financial and cost analysis information asrequested
Develop an operating plan for the Finance Unit Work closely with the agency administrative
headquarters on finance matters
Ensure that all financial authorities and otherobligation documents initiated at the incident areproperly prepared and completed
Determine incident requirements for time recordingand ensure that all personnel time records areaccurately maintained in compliance with agency(s)policy
Ensure that all financial records of the incident are
complete prior to demobilisation Provide financial input to demobilisation planning
Brief agency administrative personnel on all incident-related financial issues needing attention or follow up
Maintaining a Unit Log of other activities.
Section 4 July 2002 Page 32
8/8/2019 RFM Handbook
63/118
5. Operational Guidelines5.1 Fire Control ObjectivesThere are three basic rules for the successful containmentand control of a fire:
(i) Fast Initial Attack
be prepared (trained) and organised initiate an appropriate response as quickly as
possible deploy adequate and appropriate resources.
(ii) Confident Actions
always follow safe practices determine the appropriate objectives which, in most
cases, will be to contain the spread of fire
assessment of the fire to determine direct or in-direct attack strategy
if the fire can be contained, work hard and workquickly.
(iii) Prompt and Complete Mop Up
when the fire is contained, begin the mop upimmediately
mop up thoroughly.
5.2 Fire Control StrategyThe strategy to control a fire (direct or in-direct) dependson an assessment of a number of criteria. These include:
The fuels involved
The fire weather
8/8/2019 RFM Handbook
64/118
8/8/2019 RFM Handbook
65/118
The problems of having un-burnt fuels within the fireperimeter are reduced
Fire fighters can use the burnt area as an escape routeor safety zone.
However:
For direct attack, the fire can generally only be of lowto moderate intensity and with a low rate of spread
Fire fighters may be exposed to a greater level of heatand smoke adding to the stress and fatigue
Natural barriers are not always used to advantage.
5.2.2 In-Direct AttackThis relies on the use of a control line that may be somedistance from the fires edge. This control line mayinclude:
Less flammable fuel types Topographical features (streams, rivers, roads, etc)
Constructed fire breaks using hand tools and/ormachinery.
An In-Direct Attack:
Allows fire fighters to work well away from thedangers of high intensity fires
Is more likely to be effective against very high intensityfires
Means that the strategy changes to burning out rather
than direct fire suppression.However:
The area burnt (as a result of the burnout) is increased
Strong winds may hinder the burning out of fuelbetween the control line and the fire
8/8/2019 RFM Handbook
66/118
8/8/2019 RFM Handbook
67/118
5.3 CommunicationsIn any fire fighting operations, command and control of the incident can only be achieved with effective andreliable communications. Effective communicationsrequires radio networks and planning.
5.3.1 Communication NetworksA small incident may only require one or two radioservices for communications. A large incident howeverwill require multiple radio services to meet the needs forcommand/control functions and for ground and air
operations.SimplexSimplex is where the communications are directlybetween radios (hand held or vehicle transceivers).Simplex is characterised by:
Generally line of sight operation only Signal is quickly lost when the stations are separated
by hills and other obstructions
Typically up to 5-7 Km between hand helds
Typically up to 15-20 Km between vehicle radios
The radios all transmit and receive on a singlefrequency (for each simplex channel).
Duplex/RepeaterDuplex or Repeater operation is where the signalfrom a radio is received and re-transmitted by a powerful
base station radio transceiver located on a distant hilltop.The re-transmitted signal is the one that is received by theother radios switched to that channel. A Repeater will:
Provide communications over larger distances thanSimplex and where radios (handheld or vehicle) areseparated by hills, valleys, etc
8/8/2019 RFM Handbook
68/118
Portable RepeatersSome agencies have Repeaters packaged into robust andwaterproof transportable suitcases. These portable
repeaters can be deployed at incidents where simplexoperations are unreliable due to distance or terrain.
The Department of Conservation, the NZ Fire Service, theNational Rural Fire Authority and some RFAs have suchrepeaters that are available for major incidents.
Generally such a portable repeater would:
Be used as a command and control channel for theincident ground (with individual sectors using multiplesimplex channels)
Be deployed at the top of an adjacent hilltop to providecommunications over the entire incident ground
Include an internal re-chargeable battery providing forup to 24 hours operation
Include provision for external 12 Volt input fromvehicle supply or 240Vac input from a portablegenerator for extended operations
Include a portable antenna system that is deployed onthe hill top.
Cellular PhonesThe portability and increasing coverage provided bycellular phones has made these devices increasingly usefulfor incident communications. They:
Provide the ability to access the public telephonenetwork to call and request commercial services or toprovide data or fax capability
Provide for private person to person communications
on sensitive matters that can not be discussed on aradio channel
Are limited by the availability of coverage in andaround the location of the incident
Section 5 July 2002 Page 6
8/8/2019 RFM Handbook
69/118
Should not be used where a radio channel is availableunless a private or extended conversation is requiredwith a specific person.
Incident Ground CommunicationsIncident Ground Communications (IGC) encompasses aradio network that is set up for communications betweenthe personnel on the fire ground. This will predominantlybe simplex but some repeater channels may be useddependent on the terrain and size of the incident ground.
LMRLand Mobile Radio (LMR) is the term generally usedwhen referring to repeater based networks that are usedto provide communications between vehicles, hand heldradios and base stations. Examples are:
NZ Fire Service LMR that provides communicationswith the three national communication centres(Comcens) located in Auckland, Wellington andChristchurch
Dept of Conservation has an extensive LMRthroughout NZ
TLAs have a Civil Defence radio network
Forestry companies have LMR networks foroperations may designate one channel for fire.
Ground to AirA number of simplex channels are reserved forcommunications between the pilots and air attack or airsupport functions. These include air band channels and adesignated Emergency Services Band (ESB) channel.These channels are strictly reserved for communicationswith the pilots and must not be accessed by other groundoperations unless an emergency situation arises.
8/8/2019 RFM Handbook
70/118
5.3.2 Communications PlanAt an incident, it is necessary to establish IGC, LMR andpossibly Ground/Air communications to meet the needs of ground operations, air operations and command/control.This can present significant challenges when multipleagencies are in attendance, all of whom may operate arange of different radio systems and channels.
It is essential that agencies in different regions co-operateto prepare a plan that sets out how they will establish theradio communications required at an incident. Thiscommunications plan may need to confirm a number of variations or options dependent on the locality of anincident and the available Repeaters, Cellphone coverage,etc in that area.
Of particular importance is the ability of all emergencyservices and supporting agencies to operate on thedesignated Emergency Services Band (ESB) and thedesignated shared/liaison ESB channels.
A Communications Plan:
Should be pre-determined and prepared including the
programming of radios Identifies the Simplex and/or Repeater channels to be
used for Command/Control and ground operations
Confirms the air operations channels in consultationwith the local air operators
Identifies the provisions for additional communicationservices including Phone (Landline and Cell), Fax andData
Sets out the radio call signs that will apply on the fireground
Identifies technical resources who may be required toassist in establishing and maintaining the radionetworks (and to pre-programme radios)
Section 5 July 2002 Page 8
8/8/2019 RFM Handbook
71/118
Requires testing to confirm all agencies and operatorsare familiar with the assigned channels, call signs andprocedures
Needs to be agreed to and be signed off by therespective agencies
Included in the Rural Fire Authority fire plan for theinformation and reference of all agencies
Is further developed and formalised by the LogisticsSection of an IMT at a major incident.
5.3.3 Operating GuidelinesFormal operating procedures and practices ensure thatradio communications are effective and efficient.These include:
Be brief and to the point with messages, dont chator make flippant remarks on the channel
Use call signs, especially at the beginning and end of acommunication
Dont discuss private, personal or sensitive mattersover a radio
Be familiar with the phonetic alphabet if difficultpronunciations need to be spelt out
Radio operators should speak clearly and at a normaldelivery pace
Do not use inappropriate language or make offensiveremarks over a radio (or at any other time).
8/8/2019 RFM Handbook
72/118
5.3.4 Standard IGC Frequencies
Chan Name Freq Use
ESX66 Fire 1 143.8250 Mhz NZFS - Simplex(Primary channel)
ESX63 Fire 2 143.7875 Mhz NZFS Simplex
ESX34 Fire 3 140.9259 Mhz NZFS Simplex
ESX09 Fire 4 140.6125 Mhz NZFS Simplex
(Air Operations)
ESX04 15 SX A 140.55 Mhz DOC primarySimplex chan (A)
ESB180 MobileTx140.25 Mhz
MobileRx143.25 Mhz
NZFS Repeater(incl on Fire PortableRepeater)
ESX39 Liaison 140.9875Mhz Liaison Channel
SimplexESB164 Liaison
DuplexMobileTx
140.05 MhzMobileRx
143.05 Mhz
Liaison Repeater(incl on Fire PortableRepeater)
Note: Some radio chans may require a sub-audible access tone (CTSS).
FireRepeater
Section 5 July 2002 Page 10
8/8/2019 RFM Handbook
73/118
8/8/2019 RFM Handbook
74/118
Dont: Dont make personal comments
Dont criticise any person or agency
Never talk Off the record, exaggerate or try to becute/funny
Dont guess, speculate or say No comment.Either explain why you cant answer the question oroffer to find out the answer
Dont disagree with the reporter. Tactfully andimmediately clarify and correct the information
Dont use jargon or acronyms, use plain language
Dont speak for or make any representations on behalf of any other agency.
Section 5 July 2002 Page 12
8/8/2019 RFM Handbook
75/118
6. Fire Behaviour6.1 IntroductionThe fire behaviour information included in this FirelineHandbook represents a summary of the current state of
knowledge with respect to fire behaviour in New Zealandfuel types. It is based on material published by a numberof research and fire agencies both in NZ and overseas inan ongoing development of a New Zealand FireBehaviour Prediction (FBP) System
As such, this section is intended to provide a quick
reference guide on general fire behaviour together withrelevant equations and relationships. The relevantpublications should be referred to where more detailedfire behaviour predictions are required. The informationin this section will be updated as new information fromthe research becomes available.
Fire behaviour predictions are intended to assist in firemanagement decision making, and are not a substitute forexperience, sound judgement, or observation of actual firebehaviour. Fire behaviour can change rapidly due tochanges in fuel conditions, slope and exposure to wind,and no model can ever fully account for all the variables
that affect fire behaviour. Operational personnel must beaware of the limitations of the models contained withinthis Fire Behaviour section, and be able to recogniseunique or unusual situations as fires can be potentiallydangerous at any level of fire danger.
8/8/2019 RFM Handbook
76/118
6.2 Fire Weather Index (FWI)System structure
Fire WeatherObservations
FuelMoistureCodes
FireBehaviourIndexes
TemperatureRelative Humidity
Wind SpeedRainfall
WindSpeed
TemperatureRelative Humidity
RainfallTemperature
Rainfall
Fine FuelMoisture Code
(FFMC)
Duff MoistureCode
(DMC)
DroughtCode(DC)
Initial SpreadIndex(ISI)
Build UpIndex(BUI)
Fire WeatherIndex
(FWI)
Section 6 July 2002 Page 2
8/8/2019 RFM Handbook
77/118
Fine Fuel Moisture Code (FFMC) - a numerical rating of the moisture content of litter and other cured fine fuels.This code is an indicator of the relative ease of ignitionand flammability of fine fuel.
Duff Moisture Code (DMC) - a numerical rating of theaverage moisture content of loosely compacted organiclayers of moderate depth. This code gives an indication of fuel consumption in moderate duff layers and medium-size woody material.
Drought Code (DC) - a numerical rating of the averagemoisture content of deep, compact, organic layers. This
code is a useful indicator of seasonal drought effects onforest fuels, and amount of smouldering in deep duff layers and large logs.
Initial Spread Index (ISI) - a numerical rating of theexpected rate of fire spread. It combines the effects of wind and FFMC on rate of spread without the influence
of variable quantities of fuel.Buildup Index (BUI) - a numerical rating of the totalamount of fuel available for combustion that combinesDMC and DC.
Fire Weather Index - a numerical rating of fire intensitythat combines ISI and BUI. It is suitable as a general indexof fire danger throughout the forested and rural areas of New Zealand.
8/8/2019 RFM Handbook
78/118
6.3 Available Fuel Load (AFL) Forests
Section 6 July 2002 Page 4
8/8/2019 RFM Handbook
79/118
6.4 Available Fuel Load (AFL) Grasslands
1 Based on a ground cover of 60%
8/8/2019 RFM Handbook
80/118
6.5 Available Fuel Load (AFL) Scrublands
Section 6 July 2002 Page 6
8/8/2019 RFM Handbook
81/118
6.6 Headfire Rate of Spread (ROS) -Flat Terrain
8/8/2019 RFM Handbook
82/118
6.7 Slope Correction Factor
8/8/2019 RFM Handbook
83/118
6.8 Dense Scrub Slope Correction Factor
A reduced effect of slope on fire spread has been reported for dense scru
a reduced SCF has been proposed for scrub fuel types of one-third (1/3)
S e c t i on 6
J ul y 2
0 0 2
P a g e 9
8/8/2019 RFM Handbook
84/118
6.9 Headfire Intensity (HFI) Equations
Byrams standard fireline intensity equation is:I = H x w x r where
I = fire intensity in kilowatts per metre (kW/m);
H = net low heat of combustion in kilojoules per kilogram(kJ/kg), generally considered a constant (18,000 kJ/kg);
w = weight of fuel available for consumption in kilogramsper square metre (kg/m 2); and
r = rate of spread in metres per second (m/s).
A simplified intensity formula for field use is:
w = weight of fuel available in tonnes per hectare (t/ha);and
r = rate of spread in metres per hour (m/h).
Fire intensity is directly related to flame size and a simplerelationship for field use is:
I = fire intensity (kW/m); and
L = flame length (m).
Note that flame length should not be confused with flameheight which is the maximum vertical extension of theflame front. Only in still air conditions (i.e., no wind) onflat terrain, are flame length and height equal.
I = wherewx r2
I = 300 x (L)2 [or L = I 300] where
Section 6 July 2002 Page 10
8/8/2019 RFM Handbook
85/118
S e c t i on 6
J ul y 2
0 0 2
P a g e1 1
8/8/2019 RFM Handbook
86/118
6.10 Headf ire Intensity (HFI) Rate of Spre
8/8/2019 RFM Handbook
87/118
S e c t i on 6
J ul y 2
0 0 2
P a g e1
3
8/8/2019 RFM Handbook
88/118
8/8/2019 RFM Handbook
89/118
6.11 Headfire Intensity (HFI) FlameLength Relationship
Note 1: From Byrams (1959) formula, I=259.833(L) 2.174
Note 2: Using the field approximation, I=300(L) 2
8/8/2019 RFM Handbook
90/118
6.12 Headfire Intensity (HFI) Fire suppressionGeneralised limits of fire suppression effectiveness in relatio
8/8/2019 RFM Handbook
91/118
6.13 Fire danger class criteria Forest
Forest Fire Danger Class Graph
8/8/2019 RFM Handbook
92/118
6.14 Fire danger class criteria Grassland
Grassland Fire Danger Class Graph
Section 6 July 2002 Page 18
8/8/2019 RFM Handbook
93/118
6.15 Fire danger class criteria Scrubland
Grassland Fire Danger Class Graph
8/8/2019 RFM Handbook
94/118
6.16 Fire Danger Class Criteria
Continued over ...
8/8/2019 RFM Handbook
95/118
S e c t i on 6
J ul y 2
0 0 2
P a g e2 1
1
8/8/2019 RFM Handbook
96/118
6.17 Simple Elliptical Fire Growth Model
8/8/2019 RFM Handbook
97/118
Rough rules of thumb:
Spread Distance = Rate of Spread (ROS) x Elapsed Tim
Perimeter Length = 2.5 x Total Spread Distance
Perimeter Growth Rate (PGR) = 2.5 x Headfire Rate of
S e c t i on 6
J ul y 2
0 0 2
P a g e2
3
8/8/2019 RFM Handbook
98/118
6.18 Wind Speed Estimation
Continued over...
8/8/2019 RFM Handbook
99/118
* Provides an estimate of the unrestricted wind speed at 10m in the open.
Observable effects of wind refer to trees or structures in the centre of open (i.e.,
Open areas are preferably level or nearly level ground with only scattered tree10 times greater than the height of trees in neighbouring forests.
The estimate of wind speed, typica lly the mid-point of the values associated w
used together with FFMC to determine the ISI for fire behaviour predictions.
S e c t i on 6
J ul y 2
0 0 2
P a g e2
5
8/8/2019 RFM Handbook
100/118
6.19 Abbreviations and Conversions
BUI Buildup Index
FFMC Fine Fuel Moisture Code
FMC Foliar Moisture Content (%)
ISI Initial Spread Index
L/B Length-to-breadth ratio
LCBH Live crown base height (m)
PGR Perimeter growth rate (m/h)
ROS Rate of spread (m/h)
SCF Slope correction factor
Section 6 July 2002 Page 26
8/8/2019 RFM Handbook
101/118
Selected Conversion Factors S e c t i on 6
J ul y 2
0 0 2
P a g e2
7
8/8/2019 RFM Handbook
102/118
7. Fire Investigation7.1 On ArrivalAll personnel on the fire ground (and particularly thoseinvolved in the Initial Attack) should make a note of
anything that might assist determining the cause andorigin of the fire. Any information should be passed totheir Crew Leader or the Incident Controller and shouldinclude:
Any suspicious activities or persons at, or leaving, thescene (names, descriptions, vehicle registrations, etc)
The fire conditions on arrival (whats involved, fireintensity, smoke, flames, odours, etc)
Fire behaviour during the fire (rate and direction of spread, unusual behaviour)
Any indications of multiple points of ignition orevidence of accelerants
Statements or comments by occupiers or onlookers
Any pattern to reported fires.
8/8/2019 RFM Handbook
103/118
7.2 Fire Cause ReportThe Planning/Intell Manager is overall responsible withinthe Incident Management Team for having the cause andorigin of the fire investigated. The Planning/IntellManager may delegate this task to one of the unit leaderswithin the section. The Planning/Intell Manager ordelegated Unit Leader is responsible for collecting andevaluating all information that will assist in the process of investigating the cause and origin of the fire.
Where there is clear evidence to a suspected cause of thefire then an appropriate expert in that field must beappointed as part of the fire investigation team.For example:
Any fire suspected of involving criminal activity mustinvolve the police
Any fire caused by an electrical installation must beinvestigated by an electrical engineer
Where a fire is believed to have started from a non-permitted burn or a breach of fire permit conditions,then a compliance person may be required to interview
those involved in or responsible for the fire.
All wildfire investigators or experts in other fields that areemployed to investigate the cause and origin of fires mustbe provided with terms of reference. These will set outthe objectives, scope and terms of their assignment.
Eg, a wildfire investigator may be required to Determinethe Point of Origin, Cause, Path of Travel and Impact of the Fire and provide a written report within 10 days.The terms of reference may exclude in the scope mattersthat the Planning/Intelligence section do not want theinvestigator to address. Eg, compliance issues,interviewing particular people, talking or makingstatements to the media.
Section 7 July 2002 Page 2
8/8/2019 RFM Handbook
104/118
8/8/2019 RFM Handbook
105/118
A general overview of an operation.
A counter-fire commenced from a
natural or previously constructedfirebreak for the purpose of fighting afire. Reference, the Forest and RuralFires Act 1977.
A predetermined complement of suppliesstored in a designated location.
The orderly replacement of personnel.The process whereby resources firstreport to an incident.
A strategic position from which trafficmovement can be observes andcontrolled.
A structure to systematically manageemergency incidents.
The internal direction of members andresources of an agency in the
performance of that agencys role andtasks. Command relates to singleagencies and operates vertically withinan agency.
Has the same meaning as in theConservation Act 1987, and includes
land being managed under section 61or section 62 of the Act; but does notinclude any marginal strip as defined insection 2(1) of that Act.
A fire is contained when its spread hasbeen halted, but it may still be burningfreely within the perimeter or fire controllines.
Briefing
Burnout
Cache
ChangeoverCheck-in
Checkpoint
CoordinatedIncidentManagementSystem (CIMS)
Command
ConservationArea
Contained
8/8/2019 RFM Handbook
106/118
8/8/2019 RFM Handbook
107/118
8/8/2019 RFM Handbook
108/118
8/8/2019 RFM Handbook
109/118
The surrounding conditions, influences,and modifying forces of topography,fuel, and fire weather that determine
fire behaviour.Any area of land, vegetation, orproperty where the fire is burning orhas burnt or is threatening, in theopinion of the Fire Officer.
That portion of the fire perimeter uponwhich resources are deployed and areactively engaged in fire suppressionaction.
A log book for the recording of eventsand times of relevant activities of firesuppression actions.
Any land (not being the whole or partof a defence area within the meaningof the Defence Act 1990) that:a. In relation to a State area, is outside
that area but within 1 kilometre (orsuch less distance as may be
approved by the Minister of Conservation, after consultation withthe National Rural Fire Officer, andnotified in the Gazette) of theboundary of that area:
b. In relation to a forest area, is situatedoutside that area but within such
distance (not exceeding 1 kilometre)of the boundary thereof as isapproved by the Fire Authority of that area;
But does not include any land that, bynotice in the Gazette under section14(5A) of the Forest and Rural FiresAct 1977, is excluded from the firesafety margin of any State area.
FireEnvironment
Fire Ground
Fireline
Fire Log
Fire SafetyMargin
8/8/2019 RFM Handbook
110/118
Collectively, those weather parametersthat influence fire occurrence andsubsequent fire behaviour (e.g. dry-bulbtemperature, relative humidity, windspeed and direction, precipitation,atmospheric stability, winds aloft).
An area in the field to identify and sortpatients in priority order for removalto a Triage area.
The main location for parking, fuelling,
and maintenance of helicoptersoperating in support of an incident.
A designed location which meets specificrequirements for a helicopter to takeoff and land.
An event which requires a responsefrom one or more agencies.A statement of the objectives, strategies,and critical functions to be taken at anincident.
The location where the IncidentController and, where established,members of the Incident ManagementTeam provide overall direction of response activities in an emergencysituation.
The overall management of the responseto an incident (see Control)
The group of incident managementpersonnel carrying out the functions of Incident Controller, OperationsManager, Planning/Intelligence Managerand Logistics Manager.
d bl h d d l
Fire Weather
Forward Triage
Helibase (HB)
Helipad (HP)
Incident
Incident ActionPlan (IAP)
IncidentControl Point(ICP)
IncidentControl
IncidentManagementTeam (IMT)
I C d
.
8/8/2019 RFM Handbook
111/118
8/8/2019 RFM Handbook
112/118
8/8/2019 RFM Handbook
113/118
8/8/2019 RFM Handbook
114/118
A concept which relates to the numberof groups or individuals controlled byone person. The ratio of 1:5 is desirable,but should not exceed a ratio of 1:8.
A designated location where resources
are gathered prior to deployment.Written incident practices adopted byan agency.
A statement detailing how an objective
is to be achieved.An organisation contributing servicesor resources directly to a lead agency.
Specific actions or tasks to implementincident