Rhino Wire Mesh Platform range (RPBS - RPBXL) Prepared by: Andy Wana Approved by: Chris Murty Document No:ED002 Issue: 02 Date: 24/01/2014
Rhino Wire Mesh Platform range (RPBS - RPBXL)
Material:-Finish:-
E Dimension
Minimum meshopening on corners.
B Dimension
A Di
men
sion
Corner radii to suit mesh typeand bending process.
Top tube to be one piecewith a spigot type welded joint.
DIMENSION B IS TO BE CONSISTENT ALONG DIMENSION A
A
A
D Dimension
C Dimension
Ø25.40
A-A (1 : 2)
Steel tube & mesh9um Zinc plated & Black Powder Coating twice
All mesh ends to be welded to tube rim.
Basket Type Dim A Dim B Dim C Dim D Dim E Mesh TypeRLBS ( C 003) 1245 940 120 1160 870 50 x 50 x 4mm Dia RLBM (C 002) 1340 1070 125 1240 1000 50 x 50 x 5mm Dia RLBL (C 001) 1590 1205 150 1520 1120 50 x 50 x 5mm Dia RLBH (C 044) 1500 650 120 1415 590 50 x 50 x 5mm Dia RLBXL (C 084) 1890 1250 150 1820 1160 50 x 50 x 5mm Dia RLBN (C 618) 2205 460 120 2100 340 50 x 50 x 5mm Dia
RLBHL (C 627) 2205 650 120 2100 590 50 x 50 x 5mm Dia
Basket DimensionsNote:- the outside dimensions of the basket may vary to suit the Mesh type
Steel tube & mesh9um Zinc plated & Black Powder Coating twice
Material:-Finish:-
TOP VIEW
DIM
ENSIO
N B
DIMENSION A
PICTORIAL VIEW ADO NOT SCALE
Tube size and radius dimension are to bethe same as part GF007-01
DIMENSION B IS TO BE CONSISTENT ALONG DIMENSION A
FRONT VIEW
B
BOTTOM VIEW
A
SIDE VIEW
Top tube to be one piecewith a spigot type welded joint.
Ø 5
Ø 25.4
DETAIL ASCALE 1 : 2
50
50
DETAIL B
All mesh ends to be welded to tube rim.
Basket Type Dim A Dim B Mesh TypeRPBS (C619) 1245 940 50 x 50 x 4mm Dia RPBM (C620) 1340 1100 50 x 50 x 5mm Dia RPBL (C621) 1590 1205 50 x 50 x 5mm Dia RPBH (C622) 1500 650 50 x 50 x 5mm Dia RPBXL 2120 1180 50 x 50 x 5mm Dia
Basket Dimensions
Note:- the outside dimensions of the basket may vary to suit the Mesh type
Finish thickness - 1.5mm