1/2" X 2 3/4" HEAVY DUTY MASONRY ANCHORS
MINIMUM EMBEDMENT 1 1/4" DEEP
ELECTRICAL CONDUIT (BY OTHERS NOT WIKK IND.)
1/4" THICK ALUMINUM
BOLLARD MOUNTING BRACKET
1/4-20 STAINLESS STEEL F.H.M.S.
MASONRY MOUNTING SURFACE
BOLLARD
MOUNTING BRACKET
1.5" ∅ HOLE IN MOUNTING BRACKET
FOR ELECTRICAL CONDUIT
(4) PEM CLS NUTS
1.5" ∅ HOLE IN MOUNTING BRACKET
FOR ELECTRICAL CONDUIT
MOUNTING BASE FOR REMOVABLE BOLLARDS UP TO 50"
FOR BOLLARDS TALLER THAN 50", 7" ANCHOR KITS ARE
RECOMMENDED.
STANDARD MOUNTING BASEPART# 4M227 ASSEMBLY
10" ROUND WELDED
BASE PLATE
MOUNTING BASE DESIGN FOR SURFACE MOUNT OR IN GROUND MOUNT
USED AS A HEAVY DUTY ALTERNATIVE TO OUR STANDARD MOUNTING
BASE.
WELD
1/2" X 7" HEAVY DUTY MASONRY ANCHOR
MINIMUM EMBEDMENT 4" DEEP
MASONRY MOUNTING SURFACE
ELECTRICAL CONDUIT (BY OTHERS NOT WIKK IND.)
10" ROUND MOUNTING BASE FOR
REMOVABLE BOLLARD
MOUNTING BASE DESIGN FOR A SURFACE MOUNT REMOVABLE
BOLLARD WITH A STANDARD CONCEALED BASE BOLTED TO A
HEAVY DUTY BASE PLATE
10" ∅ X .375" STAINLESS STEEL
BASE PLATE
10" ∅ X .375" STAINLESS STEEL
BASE PLATE
ROUND BOLLARD BASE EXAMPLES
1/2" X 7" HEAVY DUTY MASONRY ANCHOR 1/2" X 7" HEAVY DUTY MASONRY ANCHOR
BOLLARD WELDED TO THE MOUNTING
BASE PLATE BOLLARD
(4) PEM CLS NUTS
1/2" X 2 3/4" HEAVY DUTY MASONRY ANCHOR
10" ROUND WELDED BASE PLATE WITH
OPTIONAL LOW PROFILE MOUNTING BOLTS
NOTE: WELDED BASE MOUNTING DOES NOT ALLOWTHE BOLLARD TO BE REMOVED FROM THE BASE
PLATE
SIMPSON DMSA50 SCREW MACHINE
ANCHOR AND BOLT
MASONRY MOUNTING SURFACE
FINISHED FLOOR / GRADE LINE
(4) 1/4-20 STAINLESS STEEL F.H.M.S.
12" TALL MOUNTING BASE / SLEEVE
BOLLARD
12.0
00"
1/2" X 7" HEAVY DUTY MASONRY ANCHOR
MINIMUM EMBEDMENT 4" DEEP
10" ROUND BASE PLATE
WITH WELDED CONCEALED SLEEVE (CS)
10" ∅ X .375" STAINLESS STEEL
BASE PLATE
1.5" ∅ HOLE IN MOUNTING BRACKET
FOR ELECTRICAL CONDUIT1.5" ∅ HOLE IN MOUNTING BRACKET
FOR ELECTRICAL CONDUIT
REMOVABLE BOLLARD
MOUNTING BASE DESIGN FOR A REMOVABLE BOLLARD WITH AN IN
GROUND MOUNTED CONCEALED SLEEVE (CS) AND HEAVY DUTY
BASE PLATE.
1/2" X 7" HEAVY DUTY MASONRY ANCHOR
MASONRY MOUNTING SURFACE
1/2" X 7" HEAVY DUTY MASONRY ANCHORS
MINIMUM EMBEDMENT 4" DEEP
ELECTRICAL CONDUIT
(BY OTHERS NOT WIKK IND.)
1/4" THICK ALUMINUM
BOLLARD MOUNTING BRACKET
1/4-20 STAINLESS STEEL F.H.M.S.
MASONRY MOUNTING SURFACE
1/4-20 STAINLESS STEEL F.H.M.S.
FOR SECURING THE BOLLARD
ELECTRICAL CONDUIT
(BY OTHERS NOT WIKK IND.)
TALL STYLE (STANDARD) MOUNTING BASEPART# 4M227-4" BASE KT
4.0
00"
(8) 1/4-20 STAINLESS STEEL F.H.M.S.
4" TALL X .250" THICK ALUMINUM BOLLARDMOUNTING BRACKET
(4) 1/2" X 2 3/4" HEAVY DUTY MASONRY ANCHORMINIMUM EMBEDMENT 1 1/4" DEEP
Recommended
