Sail Course®
Section 20, Marlinespike Seamanship
Sail Course®
Figure 20–1 Three Strand Laid Rope
Sail Course®
Figure 20–2 Braided Line
Sail Course®
Figure 20–3 Overhand knot
Sail Course®
Figure 20–4 Figure-8 Knot
WorkingEnd
Standing Part
Sail Course®
Figure 20–5 Sheet Bend
Sail Course®
Figure 20–6 Double Sheet Bend
Sail Course®
Figure 20–7 Bowline
Sail Course®
Figure 20–8 Clove Hitch
Sail Course®
Figure 20–9 Rolling Hutch
Sail Course®
Figure 20–10 Anchor Bend
Sail Course®
Figure 20–11 Whipping
Figure 20–12 Completed Whipping
Sail Course®
Vocabulary
Becket. An eye in the end of a block used for securing an end of a line; an eye in the end of a rope.
Bend. To make fast a sail to a spar or stay. Also, a knot to secure a line to another line or object.
Bight. Open or closed loop in a line or rope.
Fid. Tapered tool used in splicing.
Hitch. A knot used to secure a rope fast to another rope or to other object.
Knot. General term for securing a line to an object, another line, or itself. Also, unit of speed of one nautical
mile per hour.
Marlinespike. A pointed steel tool used in splicing to open the strands of a rope or cable. See “Fid.”
Seize. To bind by many wrappings of small line.
Seizing. Small stuff for binding.
Splice. Joining lines by interweaving the strands.
Whip. To bind the end of a rope with light line.
Sail Course®
Section 20Supplemental Illustrations
Sail Course®
Sail Course®
Cordage
Sail Course®
Parts of a Line
BITTER ENDFixed End of the Line
WORKING ENDKnot-Tying End of the
LineSTANDING
PARTBetween the Bitter and Working Ends
Sail Course®
Types of Line and Weave• Nylon
– Anchor, mooring, dock lines– Stretch w/out damage to fibers
• Polyester– Weaker than nylon– Doesn’t stretch– Common in sailboat rigging
• Polypropylene– Floats– Damaged by Sunlight
Nylon Double Braid
Nylon Three-Strand
Polypropylene
Sail Course®
Bowline
Sail Course®
Cleated Line
Sail Course®
Cleat Hitch
Sail Course®
Square Knot
Sail Course®
- a series of loops and turns that joins 2 lines
- a series of loops and turns that joins a line to something other than another line
Knot - a series of loops and turns in a single line
Bend - a series of loops and turns that joins 2 lines
Hitch - a series of loops and turns that joins a line to something other than another line
Knots, Bends and Hitches
Sail Course®
Basic Knots or Bends
• A good knot is easy to tie and easy to untie
• Knots or bends weaken line by as much as 50%
Sail Course®
• Take a 3/4 turn under the horn away from the load
• Lead the free end over and under the opposite horn
• Lead the free end over and under the other horn
• Tuck the free end under the last turn
Cleat Hitch
Sail Course®
• Start by forming an underhand loop
• Lead the free end under the standing part
• Feed the free end through the loop formed by the underhand loop
• Pull the knot tight
Figure Eight
Sail Course®
• Good Uses– Furling sails– Reefing sails– Lashing small stuff
• Should not be used for a varying load
Reef or Square Knot
Sail Course®
• Use to join two lines of different diameter– Form a bight in one line– Lead the free end of the
second line through the bight and around the Standing part of the first line
– Tuck the free end of the second line under the standing part of line two
– Snug up the bend
Sheet Bend
Sail Course®
• Form an overhand loop
• Feed the free end through the loop
• Feed the free end around the standing part
• Feed the free end into the loop
Bowline
Sail Course®
• Form an underhand loop around the post• Lead the free end above the turn• Now form another underhand loop around the post• Use a half hitch as a “locking knot” to keep the clove hitch from slipping
Clove Hitch
Sail Course®
• Make a round turn around the post or a ring
• Lead the free end around the standing part forming an underhand loop
• Repeat the last step
Round Turn & Two Half Hitches
Sail Course®
• Take a round turn around the anchor ring or a post
• Make a turn around the standing part
• Feed the free end through the center of the round turn
• Make a round turn around the standing part and snug up the bend
Anchor Bend
Sail Course®
• Make a round turn around the standing part of a second line or post
• Lead the line above the round turn• Make a turn around the line
Rolling Hitch
Sail Course®
• Whipping– Used to keep the end of a
line from unraveling• Methods
– With ‘small stuff’ or twine– Taping– Liquid whip– Melting nylon line ends
Common Whipping
Sail Course®
Caring for Lines• Overloading
– Use at 20% of breaking strength– Loading at 75% of breaking Strength may cause damage
• Avoid kinks & sharp bends• Avoid chemicals• Protect against chafing• Regular cleaning
Sail Course®
• Stow carefully• Coiling• Flemishing
Caring for Lines
Sail Course®
Winch• Start by wrapping the line clockwise• Pile the wraps up from the bottom to the top• Make more turns for a heaver load
The correct way to wrap a line around a
winch.
This will not jam.
Sail Course®
Winch
This is the incorrect way to lead a line to a winch.This will jam.
Sail Course®
Blocks and Tackle• Block
– A nautical name for a pulley
• Sheave– Roller in a block over which a line passes as it goes
through the block
• Tackle– Arrangement of line and blocks used to provide
increased mechanical advantage
• Winch– Geared drum turned by a handle and used to pull
lines such as sheets and halyards
Sail Course®
A. 1:1 – 10 lb pull lifts 10 lbsB. 2:1 – 10 lb pull lifts 20lbsC. 3:1 – 10 lb pull lifts 30lbsD. 4:1 – 10 lb pull lifts 40lbs
E. 5:1 – 10 lb pull lifts 50 lbs
Blocks and Tackles
1:1 2:1 3:1 4:1 5:1
A B C D E
Sail Course®
• Step 1– Unravel about 12” of line– Temporarily whip each strand– Also whip the base of the loose
strands– Size the eye– Open the strands where you
want to start on the standing part
A B C
abc
Making an Eye Splice
Sail Course®
• Step 2– Lay the splice with the B
strand in the middle over the starting point
– Tuck strand B under strand “b”
– Pull it up snug - but not too tight!
AB C
bc
a
Making an Eye Splice
Sail Course®
• Step 3– Now tuck strand A under the
“a” strand– Pull it up snug - but not too
tight!
AB C
bca
Making an Eye Splice
Sail Course®
• Step 4– Turn the eye splice over as
shown– Tuck strand C under the “c”
strand– Pull it up snug– Retighten the other strands
AB
C
bca
Making an Eye Splice
Sail Course®
• Step 5– Return the eye splice to the
starting position– Begin with strand B going over
the next lay and then under the next
– Continue the sequence with strand A and then strand C
– Make at least 4 to 5 more tucks pulling each strand tight
Making an Eye Splice
Sail Course®
End of Section 20 Slides