Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 1
How to configure PC Controlled Camera Control
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 2
This presentation is intended to guide the installer step by step through the camera control installation.
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 3
PC controlled DCN system with Camera Control
• Direct Camera Control
• With Allegiant Video Switcher
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 4
Direct Camera Control (PC Controlled)
Requirements :
• One Dome Camera
• CCU with TCB4
• One monitor
• DCN software V9.30 or higher!!!
• DCN Control PC = Temporary Installation PC
• Software LBB3588/00 V2.0 or higher!!!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 5
Step 1 Connect PC and Monitor
to Dome Camera
DCN Control PCwith one ComportDCN Control PCwith one Comport
RS232 AutoDome
Camera
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 6
Step 2Install virtual keyboard software
LTC 5138/00
Virtual KeyboardProgram
Virtual KeyboardProgram
DCN Control PCwith one ComportDCN Control PCwith one Comport
RS232 AutoDome
Camera
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 7
Step 3Configure Virtual Keyboard
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 8
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 9
Make sure you choose the right camera!!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 10
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 11
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 12
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 13
Step 4Set Pre-Positions
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 14
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 15
Repeat Step 4 to set all Pre-Positions
Set the highest Pre-Position as overview
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 16
Step 5Check the Pre-Positions
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 17
If you were not successful setting up the pre-positions please don’t continue with the next steps.
First make sure that the pre-positions are set.
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 18
Step 6Connect CCU to DCN Control PC and AutoDome
AutoDomeCameraPort 1
RS232 RS232DCN Control PCDCN Control PC
DCN CCU
Port 2
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 19
Step 7CCU protocol and Serial Port settings
Make sure that the ports of the CCU are set correct.
Port 1Protocol = FullBaudrate = 115.2K
Port 2Protocol = Camera ControlBaudrate = 9.6K
Keep in mind !!
LBB3500/15 & LBB3500/35
You have to change the baudrate of Port 2 to 9.6K !!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 20
Step 8Start Camera Control Software
LBB3588
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 21
An installation file must be open before camera installation is possible.
Keep in mind !!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 22
Step 9Combine seat numbers with
camera pre positions
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 23
Make sure you choose the right camera!!Camera nr = Camera Address
Keep in mind !!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 24
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 25
5
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 26
© Robert Bosch GmbH reserves all rights even in the event of industrial
property rights. We reserve all rights of disposal such as copying and
passing on to third parties.
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 27
With use of Allegiant Video Switcher(PC Controlled DCN)
Requirements :
• Allegiant switcher
• Video Switcher keyboard
• Fixed and/or AutoDome cameras
• Monitor(s)
• DCN software V8.00 or higher
• DCN Control PC with two Comports
• Software LBB3588 V1.0 or higher
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 29
Step 1Connect Camera(s),Monitor(s) and
Keyboard to Video Switcher
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 30
Step 2Connect CCU to Allegiant Switcher and
DCN Control PC
Allegiant SwitcherAllegiant SwitcherPort 1RS232 RS232DCN Control PCDCN Control PC
DCN CCU
Port 2
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 31
Step 3CCU protocol and Serial Port settings
Make sure that the following settings are chosen:
LBB3500/15 & LBB3500/35
Port 1Protocol = FullBaudrate = 115.2K
Port 2Protocol = Camera ControlBaudrate = 19.2K
Keep in mind !!
These are the default settingsfor the LBB3500/15 &LBB3500/35
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 32
Step 4Start Camera Control Software
LBB3588
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 33
An installation file must be open before camera installation is possible.
Keep in mind !!
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 34
Step 5Set Pre-Positions using the Video Switcher Keyboard
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 35
Step 6Combine seat numbers with
camera pre positions
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 36
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 37
5
Security Systems BU Communication Systems
PC Controlled Cam. Control09.12.2004 DCNDCN ST/SEU-CO 38
How to configure PC Controlled Camera Control
End of section
Robert Bosch GmbH
All rights are reserved. Reproduction or passing on to
third parties in whole or in parts is prohibited without the
written consent of the copyright owner.