Transcript
Page 1: SERIES SP1210R SP 12 0 - DelevanSP 12 0 Shi el du rfa cM on tP w I s Physical Parameters Inches Millimeters A 0.118 to 0.138 3.00 to 3.51 B 0.085 to 0.105 2.16 to 12.66 C 0.081 to

Actual Size

DASH NUMBER*

INDUCTANCE (µH)

±10% @100 kHz

DC RESISTANCE

MAXIMUM (OHMS)

CURRENT RATING

MAXIMUM (mA DC)

INCREMENTAL

CURRENT (mA DC)

SERIES SP1210RSP1210

Shielded Surface Mount Power Inductors

Physical Parameters Inches MillimetersA 0.118 to 0.138 3.00 to 3.51B 0.085 to 0.105 2.16 to 2.66C 0.081 to 0.101 2.06 to 2.57D 0.016 Min. 0.41 Min.E 0.041 to 0.061 1.04 to 1.55F 0.070 (Ref. Only) 1.78 (Ref. Only)G 0.054 (Ref Only) 1.37 (Ref. Only)Dimensions "A" and "C" are over terminals.

Operating Temperature Range –55°C to +125°C

Current Rating at 90°C Ambient 35°C Rise

Maximum Power Dissipation at 90°C 0.287 W

Inductance Measured at 1V with no DC current

Incremental Current The current at which theinductance will be decreased by a maximum of 5% from itsinitial DC value

Marking Delevan, dash number followed by an SP, date code/lot (YYWWL). Note: An R before the datecode/lot symbol indicates a RoHS component.Example: SP1210R-102J DELEVAN 102 SP R1742A

Packaging Tape & reel (12mm): 7" reel, 650 piecesmax.; 13" reel, 2500 pieces max.

Coupling 5% Typical (Ref. M83446, 1mm spacing)

Made In the U.S.A.

Power Inductors

270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com

SERIES SP1210 FERRITE CORE -471K -561K -681K -821K -102K -122K -152K -182K -222K -272K -332K -392K -472K -562K -682K -822K -103K -123K -153K -183K -223K -273K -333K -393K -473K -563K -683K -823K -104K -124K -154K -184K -224K -274K -334K -394K

18701720158014201290118010609658927847186656015504974544103753363042752492252071891741571431291181069687797165

14401380132012501190114010801030992826692665633606576487464400338322306291243212203194185162154147124119100958880

0.1000.1090.1190.133 0.147 0.1600.1750.1950.2110.3050.4400.4700.5200.5700.6300.8800.9601.31.82.02.22.53.54.65.05.56.17.98.79.613.514.720.723.026.832.4

0.4700.5600.6800.8201.001.201.51.802.202.703.303.904.705.606.808.2010.012.015.018.022.027.033.039.047.056.068.082.0100120150180220270330390

Optional Tolerances: J = 5% H = 3% G = 2%

*Complete part # must include series # PLUS the dash #

For surface finish information, refer to www.delevanfinishes.com

8/2018

Recommended