Simple Safe Assured
SIM FloWellTM
Improving well productivitythrough formation damage removal
NEW P
RODUCT
SIM FloWellTM is a dynamic underbalance system designed to improve productivity by the removal of skin and perforation damage.
SIM FloWell is a slickline deployable system that can be used to create a dynamic underbalance across a pre-determined interval within a monobore / pseudo-monobore completion string.
The system utilises Peak’s unique field proven SIM Plugs as a means of zonal isolation between which the FloWell System is run and activated.
Its modular design offers flexibility and enables varying lengths of sand face to be treated. The packer isolation alleviates any chance of unwanted stimulation in zones of no interest.
Applications
• To remove formation damage in perforation tunnels
• Recover injectivity in injection wells
Features & Benefits
• Uses standard slickline tools and running procedures
• Safe – 100% mechanical, no pyrotechnics or electronics required
• Modular design allowing any length of zone to be treated
• Easily field re-dressable in remote locations
• Sized to pass through standard completion restrictions
• Standard fishing neck design for simple recovery
• High temperature applications up to 350oF
• Cost effective means of improving productivity
SIM FloWellTM
Product Code: 420
SIM FloWellTM
Formation Damage Removal that Kick-Starts Well Productivity
Peak introduces a new addition to its proprietary SIM System range for well remediation and
flow control. SIM FloWellTM is a slickline-set remedial technology capable of removing formation
damage within selected downhole zones and thus improving well productivity.
SIM FloWell is designed to improve well productivity by
being able to remove certain types of formation damage
(e.g. crushed zones in perforation tunnels, tenacious
filter cakes and scales) in both oil and gas wells that are
wireline-perforated. The condition of the near-wellbore
region is critical to the production of hydrocarbons, and
the perforating process is one major contributor to skin
damage. The severe compressive force of perforating can
reduce the permeability of the surrounding rock, which in
turn reduces productivity.
Like the rest of the products within the SIM System range,
SIM FloWell is run, set and retrieved on slickline. Used
in conjunction with Peak’s SIM Plug Systems to provide
selective isolation of the zone to be treated, SIM FloWell
induces a sudden pressure drawdown in a wellbore, and
hence causes a surge of fluid inflow from the reservoir.
SIM FloWell has been designed specifically for
deployment in monobore oil and gas wells that are
wireline-perforated.
All SIM System products are mechanically set, providing
operational flexibility and safety. As a consequence of
being run on slickline, it offers operators a cost effective
and low risk intervention method to clean-up wellbore
damage whilst conducting routine slickline operations.
Formationdamage
Undamagedformation
Undamagedformation
Crushed zone Cleaned upperforation tunnel
Restricted �ow path Maximised �ow path
www.peakwellsystems.comPlease scan
QR code to visit our Vimeo channel.