Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-25
Single Board Computers
PC/104Ampro by ADLINKTM CoreModule® products provide unmatched fanless operation over temperature extremes, resistance to shock and vibration, conformal coating, embedded BIOS, and a long product life reputation. The CoreModule® continues to distinguish itself as an Extreme Rugged™ product for a multitude of applications.
EBXThe high-performance, feature-rich LittleBoard™ SBCs are based on the industry standard EBX form factor, co-invented by Ampro. Since 1984, LittleBoard™ SBCs have been used stand-alone or as a base with stacked electronics for long lifecycle embedded applications, requiring extreme ruggedness, reliability, high-performance processing, networking and video. Using identical mechanical format, connector placement and pinout, for 25 years, these Extreme Rugged™ SBCs are unique in offering only low-power processors for high-reliability applications.
EPICFeaturing high performance and a standard interface, EPIC ReadyBoard™ SBC products are very cost-effective for common applications. The ReadyBoard™ family is a great platform for applications such as user interface terminals for medical equipment, networked systems, building automation, kiosks, gaming, industrial applied computing and control devices. The ReadyBoard™ would benefit any high-volume embedded application that requires high performance and low cost.
After merging with Ampro, ADLINK is the leading developer of industry standards for the most widely used off-the-shelf embedded system boards, such as PC/104, EBX and EPIC. We offer a form factor for every need: the ReadyBoard™ (EPIC) family of products is designed for high-volume commercial applications, and the LittleBoard™ (EBX) line is for applications exposed to harsh environments.
General Overview
LittleBoard™
ReadyBoard™
CoreModule®
1-26
What are ISM™ & SUMIT™ What is ISM™?ISM™, short for Industry Standard Module™, is a pure 90mm x 96mm form factor (compatible with PC/104) that addresses shortcomings of existing small form factors: • Fitting circuitry without extending beyond the board
outline. • Meeting top-and bottom-side component height
restrictions. • Decoupling form factors from expansion interfaces. • Enabling flexible expansion bus and I/O
connectorization. • Allowing bus combinations that were previously
undefined and unnamed.
SBC manufacturers have struggled to fit modern legacy-free platforms onto small form factors without protruding beyond the allowed board outlines with “wings”. With the ISA bus, serial ports, and even the PCI bus no longer integrated into low power chipsets, it takes extra circuitry to meet the needs of many embedded applications.What is included in the specification? The ISM™ Specification defines the board size, four fixed mounting holes, component height limits, and flexible “expansion zones” for I/O and/or bus connectors. The fixed corner mounting holes allow re-use of enclosures without modifications in the future. What interfaces are allowed? ISM™ allows many combinations of bus and I/O connectors as long as those interfaces reside within the defined “expansion zones”. ISM™ also offers a choice of using right-angle connectors that overhang the board edges, or extending the circuit board if vertical / non-overhang connectors are used.
What architectures are allowed? ISM™ boards can be SBCs, stackable CPU and I/O cards, and even computer-on-modules (COMs). This flexibility allows easy migration from SBCs to COMs and vice-versa, or from processor to processor, while preserving investments in mechanical designs.
CoreModule®
PC/104 - ISM™ • 90 mm x 96 mm
ReadyBoard™ EPIC • 165 mm x 115 mm
LittleBoard™ EBX • 203 mm x 146 mm
What is SUMIT™? SUMIT™ is one of many board-to-board expansion interfaces that are permitted with ISM™. SUMIT™, short for Stackable Unified Module Interconnect Technology, offers PCI Express®, USB, SPI, I2C, and LPC Bus expansion using, footprint-efficient, 52-pin, high-bandwidth rugged Samtec Q2-series connectors. This mix of high-speed and low-speed buses simplifies the task of attaching many types of I/O without complex bridges and software.
What is SUMIT-ISM™? An ISM-size SBC with SUMIT™ expansion is called a “SUMIT-ISM™ SBC”. An ISM-size I/O card is similarly called a “SUMIT-ISM™ I/O module”. A more general naming scheme handles SBCs that accepts smaller boards as I/O cards, or SBCs with multiple buses, in a descriptive manner by mentioning the form factor first, followed by a list of expansion interfaces. For example, “ISM™ SBC with SUMIT™ and PC/104 expansion”, and “EPIC SBC with SUMIT™ and PC/104 expansion” are some of the possibilities. The notations “SUMIT-ISM™” or “SUMIT™ on ISM™” are contracted forms for a special case, while boards with multiple interfaces could be more confusing to label with contracted names.
Who manages these standards? A new, independent standards organization called the Small Form Factor Special Interest Group, or SFF-SIG, creates, adopts, and maintains a number of emerging standards for the low power, small form factor market. As consumer technology is often inappropriate for the embedded market, the standards feature re-usable modular building blocks, developed by embedded vendors for embedded OEMs. Many of these are optimized for ultra low power processors and controllers, yet scale up to multi-core processor environments. For more information about the specifications, visit www.sff-sig.org.
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-27
Ampro by ADLINK™ PC/104 selection guideCoreModule®
The CoreModule® family excels in Extreme Rugged™ applications and is frequently used in compact stacks where all the functions of the application are contained within the PC/104-ISM footprint. Stacks consist of a CoreModule® CPU and one or more off-the-shelf PC/104
(or SUMIT-ISM) I/O expansion modules. The stack requires a small footprint and can be mounted directly inside the system enclosure for a durable, dependable PC-compatible assembly.
CoreModule®720 745 740 730 435
CPU 1.6 GHz Atom™ E680T
1.3 GHz Atom™ E660T
0.6 GHz Atom™ E620T
1.66GHz Atom™ N455 (single core)
1.8GHz Atom™ D425 (single core)
1.8GHz Atom™ D525 (dual core)
1.6GHz Atom™ 1.6GHz Atom™ or 1.1GHz Atom™
800MHz Vortex86DX300MHz Vortex86SX
Cache 512KB Level 2 512KB / 1MB 512KB Level 2 512KB Level 2 16kB I-cache16kB D-cache
DRAM Up to 2GB soldered DDR2
Up to 2GB DDR3 512MB soldered DDR2 RA
Up to 2GB DDR2 256MB soldered DDR2
Bus Interface PC/104-Plus PC/104-Plus PC/104-Plus SUMIT-AB PC/104
PATA/ SATA (1) SATA (2) SATA (1) EIDE (1) EIDE (1) EIDE
Solid State Disk 8GB Onboard 4GB Onboard No CompactFlash CompactFlash
Serial Port (1) RS232, (3) RS232 (Tx and RX only)
(2) RS232, (1)RS232/422/485)
(2) RS-232 No 2x RS-232 2x RS-232/422/485
Parallel Port No No Yes No No
Floppy No No Yes No No
USB (6) USB 2.0 (4) USB 2.0 (2) USB 2.0 (4) USB 2.0 (plus 3 on SUMIT)
(2) USB 2.0
Keyboard / Mouse No PS/2 PS/2 No PS/2
GPIO 8 8 2 8 8
Audio No No No No No
Network Gigabit Ethernet Gigabit Ethernet Ethernet not supported
Gigabit Ethernet on PCIe x1
1 10/1001 Gigabit Ethernet
Video Optional VGA Intel® GMA 3150, VGA Intel® GMA 3150, VGA Intel® GMA 500, VGA VGA
Flat Panel Single Channel 24-bit LVDS Single Channel LVDS Single Channel LVDS Single Channel LVDS TTL/TFT
Standard Operating Temperature
-20°C to +70°C -20°C to +70°C -20°C to +70°C -20°C to +70°C -20°C to +70°C
Optional Extended Temperature
-40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C
Page Number 1-29 1-30 1-31 1-32 1-33
1-28
ReadyBoard™The ReadyBoard™ line of SBCs follow the EPIC standard form factor and are very cost-effective for standard applications providing a great platform for applications such as user interface terminals networked systems, building automation, kiosk/point-of-information, gaming, industrial applied computing and medical devices. Truly any application would benefit from a fully-featured, low-cost embedded solution.
LittleBoard™The high-performance, highly integrated LittleBoard™ SBCs are based on the industry-standard EBX form factor. A LittleBoard™ SBC can be used as a standalone product or as a base with stacked electronics for long lifecycle embedded applications, requiring ruggedness, high performance processing, networking and video.
Ampro by ADLINK™ EBX and EPIC selection guide
LittleBoard™ ReadyBoard™735 910 740 850
CPU 1.6GHz Atom™ 2.1GHz Core™ i7-2710QE2.5GHz Core™ i5-2510E2.2GHz Core™ i3-2330E
1.6GHz Atom™ N450 (single core)1.6GHz Atom™ D410 (single core)1.6GHz Atom™ D510 (dual core)
2.26GHz Core™2 Duo (Socket P)
Cache 512KB Level 2 6MB / 3MB / 3MB LLC 512KB / 1MB 3MB Level 2
DRAM Up to 2GB DDR Up to 8GB DDR3 Up to 2GB DDR Up to 4GB DDR3
Bus Interface PC/104-Plus (PCI and ISA)
PCI-104 PCI-104 PCI-104, SUMIT
PATA/ SATA (1) EIDE(2) SATA
(2) SATA (2) SATA No
Solid State Disk Compact Flash 4GB Onboard 4GB Onboard Compact Flash
Serial Port (2) RS-232, (2) RS-232/422/485
(2) RS-232/422/485 (4) RS232 (2) RS-232/422/485
Parallel Port Floppy shared No No No
Floppy Shared with parallel No No No
USB (7) USB 2.0 (2) USB 3.0(2) USB 2.0
(6) USB 2.0 (4) USB 2.0 (plus 4 on SUMIT-A)
Keyboard / Mouse PS/2 PS/2 PS/2 PS/2
GPIO 8 8 8 8
Audio AC97 High Denition Audio, S/PDIF
High Definition Audio High Definition Audio
Network Dual Gigabit Ethernet Dual Gigabit Ethernet Gigabit Ethernet Dual Gigabit Ethernet
Video Intel® GMA 950 core Intel® HD Graphics 3000 Intel® GMA 3150 Boarbcom BCM70015
Integrated Intel® 4500MHD engines
Flat Panel Dual Channel LVDS Dual-channel LVDS / DVI Single Channel LVDS / DVI Dual Channel LVDS
Standard Operating Temperature
-20°C to +70°C 0°C to +60°C 0°C to +60°C 0°C to +60°C
Optional Extended Temperature
-40°C to +80°C -20°C to +70°C -20°C to +70°C -20°C to +70°C
Page Number 1-36 1-37 1-38 1-39
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-29
CoreModule® 720
Choose Ampro by ADLINK™ CoreModule® 720 for…
A power-efficient and Extreme Rugged™, Single Board Computer delivering a broad range of functionality and optimized for space-constrained applications.
Description
The Ampro by ADLINK™ CoreModule® 720 is based on the Intel® Atom™ Processor E600 series for low power consumption in space constrained, Extreme Rugged environments. A PC/104-Plus Single Board Computer with PCI and ISA bus connectivity, the CoreModule® 720 provides an integrated 8GB Solid State Drive, CAN bus, SATA, and a broad range of peripheral I/O support.
Specifications
Core SystemCPU – Chip Intel® Atom™ Processor E600 Series
– 0.6 GHz, 1.3GHz and 1.6GHz
– Very low total power consumption 2.7 W, 3.3 W, 3.9 W
DRAM – Up to 2GB Single Channel DDR2 600/800 soldered down
Chipset – Intel® EG20T Platform Controller Hub
Video InterfaceOptional VGA LVDS – 24-bit Single Channel, 1280x768 pixel at 60Hz with backlight
Bus InterfacePC/104-Plus (PCI, ISA)
CAN Bus (single channel)
I/OSATA – 1 device
Solid State Drive, optional up to 16GB (occupies one SATA device)
USB – 6 USB 2.0 ports
Serial – 1 RS-232 (full modem), 3 RS-232 (TX and RX only)
SDIO
Network InterfaceEthernet – Intel® 82574IT Gigabit Ethernet Controller
Software & Development Tools OS Support – Linux, Windows CE 6.0 / XPe, VxWork 6.8, QNX 6.4*
BIOS – AMI with ACPI 2.0
*Note: Available upon request. Contact us for more software support.
Power SpecificationsInput Power – AT mode (5 V +/- 5%)
Power States – Supports S0
MechanicalSize – PC/104-Plus form factor 90mm x 96mm
Board Thickness – 0.093” (2.3mm thick)
Temperature
• Standard: -20°C to +70°C
• Extended: -40°C to +85°C
• Storage: -55°C to +85C
Humidity – 90% at 60°C
Shock
• Non-operation: 50G peak-to-peak, 11ms duration, MIL-STD-202G Method 213B
Vibration
• Operation: 11.95 Grms, 50-2000 Hz, each axis, MIL-STD-202G Method 214A
Ordering Information
PC/104-Plus Single Board Computer with Intel® Atom™ Processor E600 Series
Features Intel® Atom™ Processor E600 series from 600 MHz
up to 1.6 GHz Up to 2 GB soldered DDR2 SDRAM at 800 MHz 24-bit LVDS Intel® Platform Controller Hub EG20T for USB, LAN,
SDIO, Serial, CAN bus and SATA 8GB Solid State Drive onboard PC/104-Plus (ISA and PCI) Extended Temperature: -40°C to +85°C 50% thicker PCB for high vibration
environments
Model Number Description/Configuration
CM-720-R-06 PC/104-Plus Intel® Atom™ Processor E620T at 0.6 GHz with 2GB RAM and 8 GB SSD
CM-720-R-13 PC/104-Plus Intel® Atom™ Processor E660T at 1.3 GHz with 2GB RAM and 8 GB SSD
CM-720-R-16 PC/104-Plus Intel® Atom™ Processor E680T at 1.6 GHz with 2GB RAM and 8 GB SSD
CM-720-L-06 0.6GHz QuickStart Kit (R-06 SBC, 2GB RAM, Cable Kit, Software)
CM-720-L-16 1.6GHz QuickStart Kit (R-16 SBC, 2GB RAM, Cable Kit, Software)
1-30
CoreModule® 745
Choose Ampro by ADLINK™ CoreModule 745 for…
Low power performance Atom™ platform targeting ExtremeRugged™ and space-constrained applications.
Description
The Ampro by ADLINK™ CoreModule® 745 SBC uses an Intel® Luna Pier platform with 1.66GHz Atom™ N455/D525 Pineview-M/D processor and ICH8M I/O Control Hub. It includes 4 USB 2.0, two SATA 3 Gb/s, 3 serial ports, Gigabit Ethernet, 4GB SSD onboard, SMBus, LPC, and 8 GPIO.
Specifications
Core SystemCPU – Intel® Atom™ N455, 1.66GHz, 6.5 W (1 core/2 threads)
– Intel® Atom™ D525, 1.8GHz, 13 W (2 cores/4 threads)
– Intel® Atom™ D425, 1.8GHz , 10 W (1 core/2 threads)(optional)
Cache – 1MB, 8-way L2 cache for D525 dual-core processor
– 512KB, 8-way L2 cache for N455/D425 single-core processor
Chipset – Intel® ICH8-M I/O Control Hub
Memory – Up to 2GB DDR3 667 single SODIMM
FSB – 1066MHz
BIOS – AMI with CMOS backup in 16Mbit SPI Flash
Hardware Monitor – DC voltages, CPU temperature
Bus InterfacePC/104-Plus (ISA and PCI), SMBus, LPC
I/OSATA – 2 SATA 3 Gb/s
Storage - Onboard 4GB SSD
USB – 4 USB 2.0 ports
Serial – 2 RS-232 & 1 RS-232/422/485
GPIO – 8
Network InterfaceEthernet - Intel® 82574IT Gigabit Ethernet Controller
Video InterfaceIntel® GMA 3150. DirectX 9 compliant Pixel Shader v2.0
Single Channel 18-bit LVDS
Analog VGA
Software & Development ToolsOS Support – Linux, Windows® CE 6.0 / XPe, VxWork 6.7, QNX 6.4*
BIOS – AMI with ACPI 2.0
*Note: Available upon request or contact us for additional software support
Power SpecificationsInput Power - AT mode (5V DC +/-5%)
Power States - Supports S0
Mechanical and EnvironmentalSize – 106 mm x 96 mm, PC/104-Plus form factor
Board Thickness – 0.093” (2.36 mm thick)
Temperature
• Standard: -20°C to +70°C
• Extended: -40°C to +85°C
• Storage: -55°C to +85°C
Humidity – 90% at 60°C
Shock -
• Non-operating: 50G peak-to-peak, 11ms duration, MIL-STD-202G Method 213B
Vibration –
• Operating: 11.95 Grms, 50-2000 Hz, each axis, MIL-STD-202G Method 214A
Ordering Information
Atom™ PC/104-Plus Single Board Computer with ICH8-M Chipset
Features Intel® Atom™ Processor N455/D525
(D425 optional) Up to 2GB Single Channel DDR3 SDRAM PC/104-Plus expansion Intel® 82574IT Gigabit Ethernet, 3 COMs, 4 USB,
4GB SSD onboard Integrated graphics DirectX 9 controller at 200MHz Single Channel 18-bit LVDS and analog VGA
Model Number Description/Configuration
CM-745-R-27 CoreModule™ 745, Intel® Atom™ SC N455, 1.66GHz, 0MB RAM, 4GB SSD, Video, Gigabit Ethernet, PC/104-Plus
CM-745-R-29 CoreModule™ 745, Intel® Atom™ DC D525, 1.8GHz, 0MB RAM, 4GB SSD, Video, Gigabit Ethernet, PC/104-Plus
CM-745-L-27 1.6GHz QuickStart Kit (R-17 SBC, 1GB RAM, Cable kit, Software)
CM-745-L-29 1.6GHz QuickStart Kit (R-19 SBC, 2GB RAM, Cable kit, Software)
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-31
CoreModule® 740
Choose Ampro by ADLINK™ CoreModule™ 740 for…
Low power performance Atom™ platform targeting extreme rugged™ and space-constrained applications.
Description
The Ampro by ADLINK™ CoreModule® 740 SBC uses an Intel® Luna Pier platform with 1.66GHz Atom™ N450 Pineview-M processor and ICH8M I/O Control Hub. It includes USB 2.0, Single channel IDE, LPC, Floppy, Parallel, Serial ports, LPT, Stack-through connectors and integrated graphics in a compact ISM form factor SBC.
Specifications
Core SystemCPU - 1.66GHz Intel® Atom™ Processor N450 (1 core / 2 threads)
Cache – 512KB L2 Cache
Memory – On board 512MB soldered DDR2 RAM for rugged applications
Chipset – Intel® ICH8-M I/O Control Hub
FSB – 1066MHz
BIOS – AMI with CMOS backup in 16 Mbit SPI Flash
Hardware Monitor – DC voltages, CPU temperature
Bus InterfacePC/104-Plus (ISA and PCI) IDE, LPC, Parallel
I/OUSB - 2 USB 2.0 Ports
Floppy
Parallel
Serial – 2 RS-232
2 x GPIO
Keyboard/Mouse – PS/2 interface
Network InterfaceEthernet not supported
Video InterfaceIntel® GMA 3150, DirectX 9 compliant Pixel Shader v2.0
Single Channel 18-bit LVDS 1280 x 800
Analog VGA 1400 x 1050 @ 60Hz
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/XPe, VxWork 6.7, QNX 6.4
BIOS – AMI with ACPI 2.0
Power SpecificationsInput Power - AT mode (5V DC +/- 5%)
Power States - Supports S0, S5
Mechanical and EnvironmentalSize – 90 x 96 mm (3.6 x 3.8”), Expanded PC/104-Plus form factor
Board Thickness – .093” (2.36 mm thick)
Temperature
• Standard: -20°C to +70°C
• Extended: -40°C to +85°C
• Storage: -55°C to +85°C
Humidity – 90% at 60°C
Shock
Non-operating: 50G peak-to-peak, 11ms duration, MIL-STD-202G Method 213B
Vibration
Operating: 11.95 Grms, 50-2000 Hz, each axis, MIL-STD-202G Method 214A
Ordering Information
Atom™ PC/104-Plus Single Board Computer with ICH8-M Chipset
Features Intel® Atom™ Processor N450 1.66GHz Onboard Single Channel DDR2 SDRAM PC/104-Plus Expansion Integrated graphics DirectX 9 controller at
200MHz Single Channel 18-bit LVDS and Analog VGA
Model Number Description/Configuration
CM-740-R-16 CoreModule™ 740, Intel® Atom™ N450, 1.6GHz, PC/104-Plus, 512MB soldered DDR2 RAM
CM-740-L-16 Quick Start Kit (CoreModule™ 740, 1.6 GHz, 512MB soldered DDR2 RAM, cable kit, software, documentation)
1-32
Choose the Ampro by ADLINK™ CoreModule® 730 for…
Space-constrained systems targeting the lowest-power Atom™ chipset in the new ISM™ (Industry Standard Module) form factor, without a custom baseboard.
Description
Based on the Intel® Atom™ CPU and US15W System Controller Hub (SCH), the Ampro by ADLINK™ CoreModule® 730 provides a mid-performance control and compute platform for a wide range of applications. Featuring the new SUMIT™ expansion interface for legacy I/O and PCI Express support, this tiny 90x96mm footprint SBC is well-rounded with Gigabit Ethernet, CRT and flat panel video, 4 USB ports, IDE interface, CompactFlash socket, GPIO support, and optional 4 serial port PC/104 add-on card.
Specifications
Core SystemChoice of
-1.6GHz Atom™ Processor Z530
-1.1GHz Atom™ Processor Z510
Cache – 512KB Level 2
DRAM – Up to 2GB DDR2 533 SODIMM
Chipset – Intel® US15W SCH
FSB – 533 / 400MHz
System Controllers – PC-compatible DMA and interrupt controllers and timers
Real Time Clock – Battery-backed RTC / CMOS
Watchdog Timer
Powerfail Reset – Triggers when key voltage drops below predetermined threshold
Bus InterfaceSUMIT-AB (PCIe, LPC, SPI, I2C, USB), SUMIT-A only for R-11 model
I/OPATA – Single Ultra DMA IDE (1 drive)
CompactFlash socket
USB – 4 USB 2.0 ports (plus 3 on SUMIT™)
GPIO – Eight general-purpose digital I/O pins
Network InterfaceEthernet – Intel® 82574IT Gigabit Ethernet
Video InterfaceController - Integrated on US15W SCH
Intel® GMA 500 ultra low power core
3D and 2D engine
HD hardware video decode
18/24-bit LVDS, up to 112MHz pixel clock
Dual display with independent pipes
CRT via Chrontel CH7317 RGB DAC
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/5.0/XP/XPe
BIOS – AMI BIOS
Mechanical and EnvironmentalSize – 90 x 96 mm (3.6 x 3.8”); ISM™ form factor
Power Requirements – (with 2GB RAM, 100% loading)
- 1.6GHz: 1.99A @ 5V
- 1.1GHz: 1.41A @ 5V
Temperature (100 LFM system air flow)
• Standard: −20°C to +70°C
• Extended: –40°C to +85°C
• Storage: –55°C to +85°C
Board Thickness – .093” (2.36 mm)
Ordering Information
Atom™ SUMIT-ISM™ Single Board Computer Highly IntegratedCoreModule® 730
Features Ultra low power Atom™ SBC Gigabit Ethernet 4 USB, 8 GPIO IDE, CompactFlash SUMIT™ expansion ISM™ form factor Single-board solution
Model Number Description/Configuration
CM-730-R-11 CoreModule® 730, 1.1 GHz Atom™ CPU, 0MB RAM, Video, Ethernet, SUMIT-A
CM-730-R-15 CoreModule® 730, 1.6 GHz Atom™ CPU, 0MB RAM, Video, Ethernet, without SUMIT
CM-730-R-16 CoreModule® 730, 1.6 GHz Atom™ CPU, 0MB RAM, Video, Ethernet, SUMIT-AB
CM-730-L-16 1.6 GHz QuickStart Kit (R-16 SBC, 1GB RAM, cable kit, software)
MM-SIO MiniModule™ Serial I/O Card, stackable legacy I/O SUMIT™ board for CoreModule® 730
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-33
Choose Ampro by ADLINK™ CoreModule® 435 for…
Rugged, space-constrained, legacy-friendly embedded systems with modest CPU performance requirements.
Description
Based on the Vortex86SX 300MHz or Vortex86DX 800MHz processor, the Ampro by ADLINK™ CoreModule® 435 provides 4 serial ports (two with RS-422/485 capability), 10/100BASE-T & Gigabit Ethernet, VGA and flat panel video, 2 USB, IDE, and GPIO support in a PC/104 form factor.
Specifications
Core SystemCPU 300MHz Vortex86SX or 800MHz Vortex86DX
Cache 16kB I-cache, 16kB D-cache
Memory 256MB soldered DDR2
System Controllers PC-compatible DMA and interrupt controller and timers
Real Time Clock Battery-backed RTC/CMOS
Watchdog Timer
Powerfail Reset Triggers when key voltage drops below predetermined thresholds
Bus InterfacePC/104 ISA
I/O InterfacesPATA DMA 100 IDE interface supports up to two hard drives
Storage CompactFlash socket
Serial 2x RS-232, 2x RS-232/422/485
USB 2x USB 2.0 ports
KB/MS PS/2 interface
GPIO Eight general-purpose digital I/O pins
Network InterfaceEthernet 1x integrated Vortex86 10/100 port and 1x Intel 82451PI Gigabit Ethernet
Video InterfaceGraphics Engine Integrated 2D, 64-bit, single-cycle, 100MHz
Resolution 1600x768
Video Memory 32MB/64MB DDR2
VGA Yes
TTL/TFT Dual channels 12-bit or Single Channel 18-bit color depths
Supports 3.3V, 5V flat panels
Software & Development ToolsOS Support QNX v6.3; Windows CE 5.0, 6.0
BIOS AMI BIOS
MechanicalForm Factor PC/104
Dimensions 90x96mm (3.6x3.8”)
Operating Temp. -20°C to 75°C
-40°C to +85°C
Power Requirements 1.3A @ 5V
Temperature (100 LFM system air flow)
• Standard: -20°C to +70°C
• Extended: -40°C to +85°C
• Storage: -55°C to +85°C
Board Thickness .093” (2.36mm)
Ordering Information
486 PC/104 Single Board ComputerHigh Integrated, Low PowerCoreModule® 435
Features -40°C to +85°C operating temperature range 10/100 Ethernet, Gigabit Ethernet, 3D Video 4 Serial, 2 USB, 8 GPIOs PC/104 Expansion Ultra Low Power 486 migration
Model Number Description/Configuration
CM-435-R-10 CoreModule® 435, 300MHz Vortex CPU, 256MB RAM, Video, 10/100 & Gigabit Ethernet
CM-435-R-12 CoreModule® 435, 800MHz Vortex CPU, 256MB RAM, Video, 10/100 & Gigabit Ethernet
CM-435-L-10 300MHz QuickStart Kit (CM-435-R-10 SBC, cable kit, software, documentation)
CM-435-L-12 800MHz QuickStart Kit (CM-435-R-12 SBC, cable kit, software, documentation)
1-34
Legacy I/O Module in ISM Form Factor with Rich I/O expansionMiniModule™ SIO
Features SUMIT AB, PC/104 (ISA Bus) 4 serial ports - 2 with DB-9 connectors on I/O
edge, 2 by pin header 2 USB 2.0 ports, Parallel Port, Floppy, PS/2, I2C,
LPC MiniBlade supported
Model Number Description/Configuration
MM-SIO-R-01 Legacy I/O Module in ISM Form Factor with rich I/O expansion for CoreModule 730
Ordering Information
Product ConfigurationDescriptionThe MiniModule SIO provides greater flexibility to systems based on the CoreModule® 730, a highly legacy-free ruggedized single board computer, by expanding its I/O options to include PC/104 (ISA) and legacy serial, parallel, floppy and PS/2 interfaces. The CoreModule® 730 is based on the ultra low power Intel® Atom™ processor and packed with an enormous amount of data bandwidth via the new SUMIT™ interface. The MiniModule SIO expands the connectivity options of the CoreModule® 730 by providing a full mix of legacy I/O, while maintaining the rugged design inherent to the CoreModule family.
MiniModule™ SIO
Legacy I/O Module in ISM Form Factor with Rich I/O expansion
SUMIT™ Interface
SUMIT provides a flexible combination of high-speed serial buses and legacy I/O support to enable powerful embedded I/O module designs in small form-factors.
CoreModule® 730
Extreme Rugged SBC with Fanless passive-convection cooling
Thermal Module
Designed for Fanless passive-convection cooling
MiniBlade Socket:
This storage form factor provides the capability to withstand large amounts of shock and vibration.
SUMIT ASUMIT B
COM 2 Pin Header
COM 3 Pin Header
LPCParallel Port
PS/2 (KB+MS)COM 1
COM 1 Pin Header
COM 0COM 0 Pin Header
USB 0, 1
MiniBlade Socket
Power Input PC/104 (ISA BUS)
I 2C
Functional Diagram
LPC BUS
LPC BUS
LPC BUSPCIe x1
PCIe x1
PCIe x1
USB 2.0 (1x)
I2C
SPI
LPC BUS
USB 2.0(2x)
USB 2.0
PCIe x1
ISA
LPT
PS/2
COM
COM
SU
MIT
Co
nn
ect
or
B(B
ott
om
)SU
MIT
Co
nn
ect
or
A
(Bo
tto
m)
SUMIT Connector B(Top)
SUMIT Connector A (Top)
LPC Header
F85226FGLPC-to-ISA Bridge
PC/104Connector
RS232/422/485Header (2x)
DSUBConnectors (2x)
RS232/422/485Headers (2x)
RS232/422/485Transceivers
RS232/422/485Transceivers
Keyboard & Mouse Header
LPT Header
SCH3114I-NUSuper I/O
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-35
Choose the Ampro by ADLINK™ MiniModule™ ISA to…Add PC/104-Plus expansion to ReadyBoard™ and CoreModule™ products that have a PCI-104 interface (PCI bus) and add Compact Flash and Mini PCI capability.
DescriptionThe Ampro by ADLINK™ MiniModule™ ISA allows PC/104 and PC/104-Plus modules to be used with SBCs that only support PC/104 (ISA bus).
Specifications
Controller• ITE IT8888F PCI-to-ISA bridge
– PCI 2.1 compliant– Transparent mode
– Full 24-bit ISA addressing– 16-bit and 8-bit I/O and memory cycles– Software-transparent DMA– ISA bus master supports four PC/104 cards– Encodes all ISA IRQs
Bus InterfacePC/104-Plus (ISA & PCI) top side, PCI-104 bottom side
MechanicalSize – 90 x 96 mm (3.6 x 3.8”); PC/104-Plus form-factorPower Requirements – TBD
Choose the Ampro by ADLINK™ MiniModule™ 1394 to…Add up to two IEEE 1394 Firewire bus interfaces into a PC/104-Plus embedded system.
DescriptionMiniModule™ 1394 adds support for Firewire devices such as high performance video cameras with transfer rates up to 400Mbps. The card provides both PC/104-Plus and PC/104 interfaces, with the PC/104 interface utilized only to pass through bus signals and add mechanical stability. Control signals are all obtained from the PC/104-Plus (PCI) bus.
Specifications
Controller• Controller
– VIA VT6307L IEEE 1394 Host Controller– Complies with OHCI standards versions 1.0 and 1.1
• Card Support – High-speed (400Mbps), full-speed 200Mbps) and low-speed (100Mbps) transactions• Features
– Two IEEE 1394a ports, each supporting up to 32 Firewire devices– Supports “hot” insertion/removal– Power connector for supplemental +5V DC input as required– Cable power presence monitoring
Bus Interface• PC/104-Plus bus (PCI), PC/104 bus (ISA)
Mechanical• Size – 90 x 96 mm (3.6 x 3.8”) PC/104-Plus• Power Requirements – 0.06A, +5V (typical)
PC/104-Plus Expansion Module for PCI-104 SBCs
High-speed PC/104-Plus module lets you add up to two 400Mbps Firewire ports
MiniModule™ ISA
MiniModule™ 1394
Features Onboard PCI-to-ISA bridge Ampro by ADLINK™ BIOS supported Transparent to operating systems Full 24-bit ISA addressing 16-bit I/O and memory cycles
Features Provides two IEEE 1394a compliant ports at
100/200/400 Mbps Descriptors based isochronous and asynchronous
DMA channels for receive/transmit packets Supports separate TPBIAS for each port Supports 32-bit 33MHz PC/104-Plus host
interface compliant with PCI Rev. 2.2 Configurable for any PC/104-Plus bus slot
Model Number Description/Configuration
MM3-ISA-R-01 PCI -104 to PC/104-Plus bridge
Note: Minimum order quantity required. Please contact your sales representative.
Model Number Description/Configuration
MM3-1394-R-01 MiniModule™ 1394, two IEEE 1394 “Firewire” Ports
Note: Minimum order quantity required. Please contact your sales representative.
Ordering Information
Ordering Information
1-36
Atom™ EBX Single Board ComputerFeature Rich, Legacy FriendlyLittleBoard™ 735
Choose the Ampro by ADLINK™ LittleBoardTM 735 for…
Migrating legacy EBX systems to the latest lowest-power Atom™ platform.
Description
Based on the Intel® Atom™ CPU and 945GSE chipset, the Ampro by ADLINK™ LittleBoard™ 735 provides a feature-rich mid-performance SBC for a wide range of legacy-friendly applications. Featuring a PC/104-Plus expansion interface for legacy PC/104 and PC/104-Plus modules, this SBC is well-rounded with dual Ethernet, CRT and flat panel video, 4 serial ports, 6 USB ports, SATA and IDE interfaces, CompactFlash socket, PCIe Mini Card socket, High Definition Audio and GPIO support for an easy upgrade from older EBX SBCs.
Specifications
ProcessorCPU – 1.6GHz Atom™ N270
Cache – 512KB Level 2
DRAM – Up to 2GB DDR2 667 SODIMM
Chipset – Intel® 945GSE
FSB – 533MHz
System Controllers – PC-compatible DMA and interrupt controllers and timers
Real Time Clock – Battery-backed RTC / CMOS
Watchdog Timer
Powerfail Reset – Triggers when key voltage drops below predetermined threshold
Bus InterfacePC/104-Plus (PCI and ISA)
I/OPATA – Single Ultra DMA
CompactFlash socket
SATA – 2 devices
PCIe Mini Card socket
Serial – 4 ports, two are RS-232/422/485
Parallel-floppy shared
USB – 6 USB 2.0 ports (7th available through PCIe Mini Card socket)
Keyboard/Mouse – PS/2 interface
Audio – High Definition Audio
GPIO – Eight general-purpose digital I/O pins
Network InterfaceEthernet – Dual Intel® 82574IT Gigabit Ethernet
Video InterfaceController – Integrated
Intel® GMA 950 core
Dual Channel 18-bit LVDS
Dual display with independent pipes
CRT via chipset DACs
TV-Out
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/5.0/XP/XPe
BIOS – AMI with ACPI 2.0
Mechanical and EnvironmentalSize – 203 x 146 mm (8.00 x 5.75”); EBX form factor
Power Requirements – 2.4A @5V (with 2GB RAM, 100% loading)
Temperature (100 LFM system air flow)
• Standard: −20°C to +70°C
• Extended: –40°C to +80°C
• Storage: –55°C to +85°C
Board Thickness - .093” (2.36 mm)
Ordering Information
Features Legacy migration solution Dual Gigabit Ethernet 4 COM, 6 USB, audio SATA, IDE, Compact Flash PCIe Mini Card socket PC/104-Plus expansion Full-featured AtomTM platform
Model Number Description/Configuration
LB-735-R-18 LittleBoard™ 735, 1.6 GHz Atom™ N270, PC/104-Plus, Dual Ethernet, SATA, CompactFlash, Video, 0MB DDR RAM, passive heatsink -20°C to +70°C, RoHS
LB-735-P-18 LittleBoard™ 735, 1.6 GHz Atom™ (clockdown to 800MHz) CPU, 0MB DDR RAM, video, Ethernet, passive heatsink -40°C to +80°C
LB-735-F-18 LittleBoard™ 735, 1.6 GHz Atom™ CPU, 0MB RAM, video, Ethernet, heatsink w/ fan for -40°C to +80°C
LB-735-L-18 LittleBoard™ 735, 1.6 GHz QuickStart Kit, R-16 Board w/1GB DDR-RAM, cables, passive heatsink documentation, software, RoHS
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-37
Description
The Ampro by ADLINK™ ReadyBoard 910 integrates a 2nd Generation Intel® Core™ i7/i5/i3 or Celeron® processor (rPGA988B package, Socket G2), Mobile Intel® HM65 Express Chipset, onboard SSD, networking and robust I/O in a compact EPIC form factor suitable for transportation, self-service, digital signage, and video surveillance applications.
Specifications
Core SystemCPU – Intel® Core™ i7-2710QE, 2.1GHz, 6M LLC, 45W TDP
Intel® Core™ i5-2510E, 2.5GHz, 3M LLC, 35W TDP
Intel® Core™ i3-2330E, 2.2GHz, 3M LLC, 35W TDP
Intel® Celeron® B810, 1.6GHz, 2M LLC, 35W TDP
Memory - Up to 8GB dual channel DDR3 1066/1333MHz SODIMM
Chipset – Intel® HM65 Platform Controller Hub
BIOS - AMI with CMOS backup in 32 Mbit SPI Flash
Hardware Monitor - Supply voltages and CPU temperature
Bus InterfacePCI-104, PCIe Mini Card
I/OSATA – 2 devices
USB – 2x USB 3.0 with 5Gb/s data transfer rate (faceplate)
2x USB 2.0 (onboard pin header)
Serial – 2 configurable ports for RS-232/422/485
LED & reset – Power, SATA active, reset button
Keyboard/Mouse – PS/2 interface
GPIO – 4x GPI and 4x GPO
Audio – High Definition Audio; S/PDIF
Storage – Onboard SSD (default 4GB)
Network InterfaceEthernet – Dual Gigabit Ethernet (Intel® 82574IT controller)
Video InterfaceIntegrated Intel® HD Graphics 3000 supporting dual independent displays
Intel® Dynamic Video Memory Technology (DVMT 5.0)
DirectX 10 and OpenGL 2.1
3 display ports:
DVI-D - Resolution up to 1920 x 1200 @ 60Hz (WUXGA)
VGA - Resolution up to 2048 x 1536 @ 60 Hz (QXGA)
LVDS - Dual-channel 24-bit LVDS; resolution up to 1920 x 1080 @ 60Hz
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/XPe/7, VxWorks 6.6, QNX 6.4
BIOS – AMI with ACPI 2.0
Power SpecificationsInput Power – AT mode (12 V +/- 5%), ATX mode (12 V and 5 Vsb +/- 5%)
Power States – Supports S0, S1, S3, S4, S5
Mechanical and EnvironmentalSize – 165.1 x 114.3 mm (6.5 x 4.5”); EPIC form factor
Board Thickness – .093” (2.36 mm)
Temperature
• Standard: 0°C to +60°C
• Extended: -20°C to +70°C
• Storage: -20°C to +75°C
Humidity – 90% at 60°C
Ordering Information
Intel® Core™ i7/i5 EPIC Single Board ComputerReadyBoard™ 910
Features 2nd Generation Intel® Core™ i7/i5 Processor Dual Gigabit Ethernet USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate Analog VGA, LVDS and DVI-D display PCI Express Mini Card socket; PCI-104 expansion Onboard SSD
Model Number Description/Configuration
RB-910-S ReadyBoard 910, PCI-104, HM65, Socket G2, 4GB on board SSD
RB-910-L-2710 Quick Start Kit (Intel® Core™ i7-2710QE Processor, cable kit, 2GB RAM, QuickDrive, Fansink thermal module)
1-38
Choose the Ampro by ADLINK™ ReadyBoard™ 740 for…
Compact embedded applications that need ultra high CPU performance and high speed I/O
Description
The Ampro by ADLINK™ ReadyBoard 740 integrates a single- or dual-core Atom™ processor and ICH8M chipset, onboard SSD, H.264 video decoder, networking and robust I/O in a compact EPIC form factor suitable for transportation, self-service, digital signage, and video surveillance applications.
Specifications
Core SystemCPU – Intel® Atom™ N450, 1.66GHz, 5.5 W (1 core/2 threads)
Intel® Atom™ D510, 1.66GHz, 13 W (2 cores/4 threads)
Intel® Atom™ D410, 1.66GHz , 10 W (1 core/2 threads)
Cache – 1MB, 8-way L2 cache for D510 dual-core processor, 512KB, 8-way L2 cache for N450/D410 single-core processor
DRAM – Up to 2GB single channel DDR2 667/800 SODIMM
Chipset – Intel® ICH8-M
BIOS - AMI with CMOS backup in 16 Mbit SPI flash
Hardware Monitor - Supply voltages and CPU temperature
Bus InterfacePCI-104, PCIe Mini Card
I/OSATA – 2 devicesUSB – 6 USB 2.0 ports, 4 ports through pin headersSerial – 4 configurable ports for RS-232/422/485LED & reset – Power, SATA active, reset buttonKeyboard/Mouse – PS/2 interface GPIO – 8 Audio – High Definition AudioStorage – Onboard SSD
Network InterfaceEthernet – Intel® 82574L Gigabit ports
Video InterfaceIntel® GMA 3150 integrated on CPUDVMT 4.0, 400 MHz core render clockDirectX 9 compliant Pixel Shader v2.0
Intel® Clear Video Technology
— MPEG2 Hardware Acceleration
— ProcAmp
3 display ports: VGA, LVDS, and DVI
— Analog VGA display up to 2048 x 1536 @ 60 Hz
— Single channel 24-bit LVDS up to 1366 x 768
— DVI-D interface up to UXGA (1600 x 1200)
H.264 Video Decoder (optional)
— PCIe Broadcom BCM70015
— High Definition Video (1080p) playback
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/XPe/7, VxWorks 6.6, QNX 6.4
BIOS – AMI with ACPI 2.0
Power SpecificationsInput Power – AT mode (12 V +/- 5%), ATX mode (12 V and 5 Vsb +/- 5%)
Power States – Supports S0, S1, S3, S4, S5
Mechanical and EnvironmentalSize – 165.1 x 114.3 mm (6.5 x 4.5”); EPIC form factor
Board Thickness – .093” (2.36 mm)
Temperature
• Standard: 0°C to +60°C
• Extended: -20°C to +70°C
• Storage: -20°C to +75°C
Humidity – 90% at 60°C
Ordering Information
Dual-Core Intel® Atom™ EPIC Single Board Computer with H.264 Hardware Video DecoderReadyBoard™ 740
Features Intel® Dual Core Atom™ Processor Gigabit Ethernet H.264 Hardware Video Decoder Analog VGA, LVDS and DVI-D display PCI Express Mini Card socket Onboard SSD
Model Number Description/Configuration
RB-740-R-18 Atom N450 1.66GHz, Integrated Graphics, 18-bit LVDS, 4GB on board SSD, 0°C to 60°C
RB-740-R-17 Atom N450 1.66GHz, H.264 decoder, DVI, 24-bit LVDS, 4GB on board SSD, -20°C to +70°C
RB-740-R-16 Atom D510 1.66GHz, H.264 decoder, DVI, 24-bit LVDS, 4GB on board SSD, -20°C to +70°C
RB-740-R-14 Atom D410 1.66GHz, Integrated Graphics, 24-bit LVDS, 4GB on board SSD, -20°C to +70°C
RB-740-L-16 Quick Start Kit (Atom D510 1.66GHz board, cable kit, 1GB RAM, DVI, 24-bit LVDS, drivers & software)
Am
pro by AD
LINK
™ Extrem
e Rugged™
http://www.adlinktech.com/ampro/1-39
Choose the Ampro by ADLINK™ ReadyBoard™ 850 for…
Compact embedded applications that need ultra high CPU performance and high speed I/O
Description
The Ampro by ADLINK™ ReadyBoard™ 850 SBC uses an Intel® Core™2 Duo processor for ultra high performance. It includes dual Gigabit Ethernet, USB 2.0, SATA and high end graphics in a compact EPIC form factor SBC with PC style connectors. Featured is the new SUMIT™ expansion interface for legacy I/O and PCI Express support.
Specifications
Core SystemCPU – Intel® Core™2 Duo up to 2.26GHz (Socket P)
Cache – 3MB L2 Cache
DRAM – Up to 4GB Dual Channel DDR3 800/1066 SODIMM
Chipset – Intel® GM45 Express GMCH/ICH9-M
FSB – 1066MHz
BIOS - AMI with CMOS backup in 16 Mbit SPI flash
Hardware Monitor - Supplies voltages and CPU temperature
Bus InterfacePCI-104, SUMIT™
I/OSATA – 2 devices
USB – 4 USB 2.0 Ports, plus 4 more on SUMIT-A
Serial – 2 are RS-232/422/485
LED & reset – Power, IDE(CF) active, SATA active, reset button
Keyboard/Mouse – PS/2 interface
GPIO – 8
Audio – High Definition Audio
Network InterfaceEthernet – Dual Intel® 82574L Gigabit ports
Video InterfaceMobile Intel® Graphic Media Accelerator 4500MHD
Intel® Clear Video Technology
Graphics core speeds up to 533MHz
Dual panel display with two independent pipelines
Single/Dual Channel 18/24-bit LVDS
CRT resolutions up to QXGA
Software & Development ToolsOS Support – Linux, Windows® CE 6.0/XPe, VxWorks 6.6, QNX 6.4
BIOS – AMI with ACPI 2.0
Power SpecificationsInput Power – AT mode (12 V +/- 5%), ATX mode (12 V and 5 Vsb +/- 5%)
Power States – Supports S0, S1, S3, S4, S5
Mechanical and EnvironmentalSize – 165.1 x 114.3 mm (6.5 x 4.5”); EPIC form factor
Board Thickness – .062” (1.6 mm)
Temperature
• Standard: 0°C to +60°C
• Extended: -20°C to +70°C
• Storage: -20°C to +75°C
Humidity – 90% at 60°C
Shock - 15G peak-to-peak, 11ms duration, non-operation
Vibration
• Non-operating : 1.88 Grms, 5-500 Hz, each axis
• Operating : 0.5 Grms, 5-500 Hz, each axis
Ordering Information
Core™2 Duo EPIC Single Board Computer with SUMIT™ Expansion and GM45/ICH9-M ChipsetReadyBoard™ 850
Features Intel® Core™2 Duo Processor supported Dual Channel DDR3 SODIMM up to 4GB PCI-104 and SUMIT expansion Dual Gigabit Ethernet Single/Dual Channel 18/24-bit LVDS and
Analog VGA
Model Number Description/Configuration
RB-850-S ReadyBoard™ 850, Socket, dual Gigabit Ethernet, no RAM
RB-850-S-P8400 ReadyBoard™ 850, 2.26 GHz CPU, dual Gigabit Ethernet, no RAM
RB-850-L-P8400 Quick Start Kit (ReadyBoard™ 850, 2.26 GHz, 1GB RAM, cable kit, software, documentation)