BUILDINGS PUBLIC WORKS
TO MARK
TO MARK
MARKING PAINTS & ACCESSORIES ....................................................................................................p.7
CIVIL ENGINEERING-RELATED PRODUCTS ......................................................................................................................p.23
KEY EVENTSFounded in 1962 by Christian de Maillard,
SOPPEC was initially a Charente-based
company which elaborated paints, wood
maintenance products and varnishes for
professional use.
On the eve of the 1990s, the company was
specialising in the design, manufacture
and marketing of innovative marking
systems in aerosols.
Intended initially for forestry marking
professionals, the SOPPEC aerosols have
made a successful name for themselves
in the building and public works world,
carried by the development of an
innovative, patented safety spray cap.
In 2004, Thibault de Maillard, Managing
Director since 1996, succeeded his father
and became the owner of a constantly
growing company that had become the
European leader in its markets, with
innovation and diversification the keys to
its development.
Having opened a new logistics and storage
site in 2009, 2010 marked a new stage for
SOPPEC with a significant increase in its
production capacity to support the growth
of its domestic and export markets.
THE VALUES WHICH MAKES US DIFFERENT
C U S T O M E R
S A T I S F A C T I O N
Customer satisfaction is one of the key
values in our international development. It
is based on constantly and cost-effectively
improving performances and focusing
carefully on anticipating expectations and
new requirements.
I N N O V A T I O N
The fruit of nearly thirty years of research
and testing, the creation of aerosol
marking systems was a major innovation
and represented decisive progress for
professional users. Our product ranges
have been improved constantly since
then.Focusing on durability, safety,
enhancement and extension of products
range, respect of man and environment.
Since 2016, all the products upside down
are being equipped with the patented
Soppec «TP» safety cap.
T R U S T
Analyses, qualitative tests, multiple ins-
pections, ageing tests, etc. Every product
manufactured by SOPPEC benefits from our
total process control, from design to market
launch. This total traceability is what makes
SOPPEC an absolutely trustworthy supplier
for all professionals or professional user.
R I S K M A N A G E M E N T
SOPPEC has been committed to a glo-
bal quality, safety and environmentally-
friendly approach for twenty years. This
includes risk control for both the produc-
tion and logistics sites and product users.
Our “SEVESO“-classified French manufac-
turing sites are measured specifically for
the storage of gases and solvents used in
the aerosols. The products themselves are
inspected many times for their seal and
reliability.
SOPPEC HAS BEEN IMPOSING ITS BRAND SINCE 1962A European leader which continues to score points
TO MARK
A BRAND WHICH RESPECT MAN AND THE ENVIRONMENT
INTERNATIONAL COATINGS CARE® COMMITMENT SOPPEC pioneered the introduction of the COATINGS CARE international programme into France in the 1990s. An initiative specific to the coatings industry (paints, glues and adhesives, inks, etc.), the Coatings Care Programme has been implemented in more than ten countries worldwide, including the USA, Canada, Brazil, Japan, Australia and France, for more than ten years. All of them aim to consider undertake to consider and control the impacts of their activities on health, safety and the environment. They are therefore adhering to genuine ethics of responsibility and on-going improvement.
QSE-CERTIFIED MANAGEMENT SYSTEMThe QSE integrated management system is based on three certifications - ISO 9001 for Quality, ISO 14001 for the Environment and OHSAS 18001 for Health and Safety. In these three complementary fields, the SOPPEC approach is based on analysing and preventing risks, on-going improvement of performances, compliance with regulatory requirements and customer satisfaction. The triple certification has been renewed successfully every three years since 2004.
TAKING UP THE SUSTAINABLE DEVELOPMENT CHALLENGEToday, the certifications obtained by the company and their renewal commit SOPPEC to a path of real sustainable development policy. This policy is hence-forth defined in the charter below.
SOPPEC COMMITMENT FOR SUSTAINABLE DEVELOPMENT• Make environmental protection, human health and responsibility for individuals the conditions of its survival.
• Promote internally a genuine sustainable development attitude, where social dialogue, awareness-raising, staff training and an organisa-
tion to achieve this reign supreme.
• Act as an ambassador for sustainable development to its customers, suppliers and partners.
• Behave as a socially responsible company by conducting a policy of transparency, on-going improvement and listening.
• Contribute to the search for and development of ever-safer products.
• Comply with and even anticipate the health, safety and environment regulations for an economically acceptable cost.
• Make its ethical and law-abiding behaviour the fundamental rule in its commercial initiatives.
PRÉSERVELA
COUCHED'OZO
NE
•
T H E E N V I R O N M E N T A N D
S A F E T Y A T T H E C O R E O F
O U R P R I O R I T I E S
Our products are designed
WITHOUT CMR compounds (carcinogenic, mutagenic
and toxic to reproduction substances of class 1A, 1B
& 2 above 0.1%
WITHOUT Hexan et Methanol, Toluen et Xylen
WITHOUT heavy metals such as Lead (PB), Cadmium
(Cd), WITHOUT Environmental Hazard statement
n° 412 : «toxic to aquatic organisms long-term
damage to the ecosystem». Our labels are in
compliance with EU regulation n° 1272/2008 and
with its adaptation.
A BRAND WHICH RESPECT MAN AND THE ENVIRONMENT
7
FLUO TP®
PROMARKER®
S MARKTRACK MARKERHYDRO TP TEMPO TPIDEAL SPRAY®
ONE WHEEL APPLICATORGUN HANDLE
The reference for over 15 years in the building and
public works industries, SOPPEC Spot markers were
the first to be equipped with our patented safety
caps guaranteeing flawless reliability for our users.
Six different product ranges cover all the different marking
applications for construction sites and public works, whatever
the type of marking needed: provisional, temporary, fluorescent,
non-fluorescent, more environmentally-friendly (formulation
containing over 25% water).
ADVANTAGES
The building and public works ranges are fitted with two
different types of diffuser cap:
• The patented Soppec 1 «TP» safety cap, with a base made from
recycled plastic, is fitted to all ranges that can be used upside-
down: FLUO TP®, PROMARKER®, S MARK, TRACK MARKER, HYDRO
TP, TEMPO TP.
• A second specific cap 2 equips the IDEAL SPRAY® aerosols to
enable easy multi-directional use.
• All aerosols are formulated in accordance with the rules of our triple
certification standards.
• The products can continue to be used even under very low
temperatures thanks to the highly pressurised containers and
specific propellant gas.
MARKING PAINTS & ACCESSORIES
TO MARK
CLOSED
CLIC !
OPEN
CLIC !
1
Use upsidedown
2
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
PROPERTIES• Usable on a very wide range of surfaces such as: concrete, asphalt, grass,
gravel, sand, stone, wood.
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Rapid drying: approximately 10 min.
• Very good autonomy and coverage ability: 1 aerosol is sufficient to durably mark an 80m line (2cm wide) using the Soppec marking stick.
• High marking duration including on damp surfaces, of up to 12 months (dependent on the surface, the conditions of application and UV exposure).
• Temperature range: -20°C to 50°C.
Fluo TP is available in a wide range of colours.
FLUO TP®
VERY FLUORESCENT [12 MONTHS] WORK SITE AEROSOL MARKERTHE UNDISPUTED REFERENCE FOR CONSTRUCTION AND PUBLIC WORKS PROFESSIONALS FOR ALL MARKING REQUIREMENTS
FLUO TP® is designed to meet the highest demands for marking visibility and long term durability. It is particularly popular with surveyors for identification marking and setting-out, but is also used for all general civil engineering works : highways, earthworks, pipework and construction, buried networks. With its new formula (2016), with even greater fluorescent pigment density, FLUO TP® is the most visible and the most fluorescent marker on the market. Easy and safe to use, FLUO TP® is fitted with the patented Soppec «TP» safety spray cap.
98
FLUO REDRef. 141513
FLUO ORANGERef. 141516
FLUO YELLOWRef. 141517
FLUO GREENRef. 141518
FLUO BLUERef. 141519
FLUO MAUVERef. 141520
FLUO CHERRY REDRef. 141525
C H A R A C T E R I S T I C S
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
STORAGE & HANDLING
The aerosols should be stored between
15 and 25°C and 50% to 60% relative
humidity.
Do not expose to a temperature greater
than 50°C. Can be stored for up to 4
years prior to use (storage conditions as
defined above).
Keep away from all ignition and heat
sources and direct sunlight.
As with any other handling and storage
operation, it is especially recommended
NOT TO SMOKE.
COMPOSITION
Binder: acrylic.Pigments: lead- and cadmium-free mi-neral and organic.Solvents: complex mix free of chlorina-ted solvents and aromatic compounds (toluene, xylene, etc.).Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).BEFORE USE: shake well upside down.
AFTER USE: purge upright.
HEALTH AND SAFETY
Consult the material safety data
sheets free of charge on the Internet:
www.quick-fds.com.
No paint running or mist during use
thanks to the patented SOPPEC safety
cap.
CLP Labelling with one
hazard pictogram.
9
PACKAGING
NON-FLUORESCENT CONSTRUCTION SITE MARKER [12 MONTHS]PROMARKER® is used for a range of marking/identification purposes as a complement to the Fluorescent markers: earthworks, pipework and construction, electrical installations.With an excellent covering power it can effectively hide other markings.Easy and safe to use, PROMARKER® is fitted with the patented Soppec «TP» safety spray cap.
PROPERTIESUsable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Rapid drying: approximately 10 min.
• Excellent coverage power.
• Marking period: nine to twelve months (depending on the surfaces and application conditions) and great resistance to bad weather and UV.
• Usage temperatures: -20°C to 50°C.
• Wide range of colours in 500 ml and 750 ml sizes.
Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
PROMARKER®
BROWNRef. 141509
April 2016
1110
YELLOWRef. 141502
WHITERef. 141500
BLACKRef. 141503
REDRef. 141504
GRAYRef. 141507
C H A R A C T E R I S T I C S
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
REDRef. 142504
BLUERef. 142501
GREENRef. 142505
ORANGERef. 142506
YELLOWRef. 142502
BLACKRef. 142503
WHITERef. 142500
PACKAGINGVolume 1000 ml / net 750 ml
STORAGE & HANDLING
The aerosols should be stored between 15 and 25°C and 50% to 60% relative humidity.Do not expose to a temperature greater than 50°C. Can be stored for up to 4 years prior to use (storage conditions as defined above).Keep away from all ignition and heat sources and direct sunlight.As with any other handling and storage operation, it is especially recommended NOT TO SMOKE.
COMPOSITION
Binder: acrylic.Pigments: lead- and cadmium-free mi-neral and organic.Solvents: complex mix free of chlorina-ted solvents and aromatic compounds (toluene, xylene, etc.)Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).
BEFORE USE: shake well with top poin-ting downwards.AFTER USE: vent with top pointing upwards.
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.com.No paint running or mist during use thanks to the patented SOPPEC safety cap.CLP Labelling with one hazard pictogram.
11
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
FLUORESCENT WORKSITE MARKER [6 MONTHS] S MARK is used for all general marking works in various fields: earthworks, pipework and construction, roads maintenance, buried networks .
Easy and safe to use, S MARK is now fitted with the patented Soppec «TP» safety spray cap.
S MARK
• Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Rapid drying: approximately 10 min.
• Good autonomy and coverage ability: 1 aerosol is sufficient to durably mark an 55m line (2cm wide) using the Soppec marking stick.
• Good marking duration including on damp surfaces, of up to 6 months (dependent on the surface, the conditions of application and UV exposure).
• Temperature range: -20°C to 50°C Tamperature on use:
S MARK is available in a wide range of colours.
PROPERTIES
FLUO REDRef. 141913
FLUO ORANGERef. 141916
FLUO YELLOWRef. 141917
FLUO GREENRef. 141918
FLUO BLUERef. 141919
FLUO CHERRY REDRef. 141925
WHITERef. 141900
1312
C H A R A C T E R I S T I C S
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
STORAGE & HANDLING
The aerosols should be stored between
15 and 25°C and 50% to 60% relative
humidity.
Do not expose to a temperature greater
than 50°C. Can be stored for up to 4
years prior to use (storage conditions as
defined above).
Keep away from all ignition and heat
sources and direct sunlight.
As with any other handling and storage
operation, it is especially recommended
NOT TO SMOKE.
COMPOSITION
Binder: acrylic.
Pigments: lead- and cadmium-free mi-
neral and organic.
Solvents: complex mix free of chlorina-
ted solvents and aromatic compounds
(toluene, xylene, etc.).
Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).BEFORE USE: shake well upside down.
AFTER USE: purge upright
HEALTH AND SAFETY
Consult the material safety data
sheets free of charge on the Internet:
www.quick-fds.com.
No paint running or mist during use
thanks to the SOPPEC safety cap.
CLP Labelling with two
hazard pictograms.
13
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
FLUORESCENT WORKSITE MARKER [3 MONTHS] TRACK MARKER has been designed to answer to basic marking works in different fields (pavements and roads refection, constructions, ..) when short marking duration is sufficient.
Easy and safe to use, TRACK MARKER is fitted with the patented Soppec «TP» safety spray cap.
• Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Very rapid drying: approximately 5 min.
• Autonomy and coverage ability: 1 aerosol is sufficient to mark an 30m line (2cm wide) using the Soppec marking stick.
• Marking duration including on damp surfaces, of up to 3 months (dependent on the surface, the conditions of application and UV exposure).
• Use Temperature range: -20°C to 50°C
TRACK MARKER is available in 6 colours.
PROPERTIES
1514
TRACK MARKER
ROJO FLUORESCENTERéf. 141913
NARANJA FLUORESCENTERéf. 141916
AMARILLO FLUORESCENTERéf. 141917
VERDE FLUORESCENTERéf. 141918
AZUL FLUORESCENTERéf. 141919
CEREZA FLUORESCENTERéf. 141925
C H A R A C T E R I S T I C S
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
STORAGE & HANDLING
The aerosols should be stored between
15 and 25°C and 50% to 60% relative
humidity.
Do not expose to a temperature greater
than 50°C. Can be stored for up to 4
years prior to use (storage conditions as
defined above).
Keep away from all ignition and heat
sources and direct sunlight.
As with any other handling and storage
operation, it is especially recommended
NOT TO SMOKE.
COMPOSITION
Binder: acrylic.
Pigments: lead- and cadmium-free mi-
neral and organic.
Solvents: complex mix free of chlorina-
ted solvents and aromatic compounds
(toluene, xylene, etc.).
Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).BEFORE USE: shake well upside down.
AFTER USE: purge upright
HEALTH AND SAFETY
Consult the material safety data
sheets free of charge on the Internet:
www.quick-fds.com.
No paint running or mist during use
thanks to the SOPPEC safety cap.
CLP Labelling with two
hazard pictograms.
15
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
FLUORESCENT WORKSITE MARKER WATER BASED [ABOUT 6 MONTHS]Even more human- and environmentally-friendly as formulated with more than 25% water in the fluorescent formulations, HYDRO TP performs in similar fashion to FLUO TP®.It is used for miscellaneous marking work on the ground in the following fields: road systems, earthworks, piping, constructions, electrical installations.Easy and safe to use, HYDRO TP is fitted with the patented Soppec «TP» safety spray cap.
PROPERTIES • High visibility even from afar thanks to its highly-fluorescent formulation.
• May be used on all surfaces (wood, concrete, bitumen, gravel, rocks, etc.)
• Good coverage
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Good marking duration including on damp surfaces, of at least 6 months (dependent on the surface, the conditions of application and UV exposure).
• Rapid drying: approximately 10 min.
• Use Temperature range: +5°C to 50°C ( hydgrometry rate < 85%)
Note : To achieve the best performances of Hydro TP, the paint must be completely dry. It remains sensitive to water, rain ,humidity , until it is completely dry.
HYDRO TP is available from stock on some colours, others are available under special conditions
HYDRO TP
WHITE*Ref. 142200
FLUO REDRef. 142213
FLUO ORANGERef. 142216
FLUO YELLOW*Ref. 142217
FLUO GREEN*Ref. 142218
FLUO BLUERef. 142219
FLUO CHERRY REDRef. 142225
*Under special condition volume and lead time
1716
C H A R A C T E R I S T I C S
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
STORAGE & HANDLING
The aerosols should be stored between
15 and 25°C and 50% to 60% relative
humidity.
Do not expose to a temperature greater
than 50°C. Can be stored for up to 2
years prior to use (storage conditions as
defined above).
Keep away from all ignition and heat
sources and direct sunlight.
As with any other handling and storage
operation, it is especially recommended
NOT TO SMOKE.
COMPOSITION
Binder: complex mix of polymers.
Water: between 25% and 28%
depending on the fluorescent colours.
Pigments: lead- and cadmium-free
mineral and organic.
Solvents: complex mix free of
chlorinated solvents and aromatic
compounds (toluene, xylene, etc.).
Propellant gas: Dimethyl ether.
APPLICATION METHOD
Manually or with our application equipment (rod and gun, see pages 20
and 21).BEFORE USE: shake well upside down.AFTER USE: purge upright.
HEALTH AND SAFETY
Consult the material safety data
sheets free of charge on the Internet:
www.quick-fds.com.
No paint running or mist during use
thanks to the patented SOPPEC safety
cap.
CLP Labelling with
two hazard
pictograms.
17
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
TEMPORARY FLUORESCENT WORKSITE MARKER [ENVIRON 2-8 WEEKS]TEMPO TP is used for short term marking ( 2-8 weeks).
This Chalk-based product is erasable under mechanically means (water spray, low pressure cleaner, brushes…). This easily allows its use on classified or protected areas, for urban environment, for landscaping plan.
Easy and safe to use, TEMPO TP is fitted with the patented Soppec «TP» safety spray cap.
PROPERTIES• Excellent adhesion on various surfaces: bitumes, grass, concrete, sand ( for others
surfaces test before use)
• Higly visible from afar
• Quick drying: 10 mn
• Use temperature range: -20 to 50°C
• Short marking duration including on damp surfaces, of up to 8 weeks (dependent on the surface, the conditions of application and UV exposure).
Tempo TP is available in a large wide of colours.
TEMPO TP
1918
WHITERef. 141600
FLUO CHERRY REDRef. 141625
FLUO BLUERef. 141619
FLUO GREENRef. 141618
FLUO YELLOWRef. 141617
FLUO ORANGERef. 141616
FLUO REDRef. 141613
C H A R A C T E R I S T I C S
STORAGE & HANDLING
The aerosols should be stored between
15 and 25°C and 50% to 60% relative
humidity.
Do not expose to a temperature greater
than 50°C. Can be stored for up to 4
years prior to use (storage conditions as
defined above).
Keep away from all ignition and heat
sources and direct sunlight.
As with any other handling and storage
operation, it is especially recommended
NOT TO SMOKE.
COMPOSITION
Binder: complex mix of mineral oils and
clays.
Pigments: lead- and cadmium-free mi-
neral and organic.
Solvents: complex mix free of chlorina-
ted solvents and aromatic compounds
(toluene, xylene, etc.).
Propellant gas: specific mix of isobu-
tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).
BEFORE USE: shake well upside down.
AFTER USE: purge upright.
HEALTH AND SAFETY
Consult the material safety data
sheets free of charge on the Internet:
www.quick-fds.com.
No paint running or mist during use
thanks to the patented SOPPEC safety
cap.
CLP Labelling with
two hazard
pictograms.
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
19
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
FLUORESCENT MULTIDIRECTIONAL MARKER [9-12 MONTHS]IDEAL SPRAY® can be used for all types of marking and identification, whatever the direction needed, thanks to its 360° multi-directional valve. Preferably use for markings in sewers, tunnels and on all second fix horizontal and vertical surfaces but can be used for road systems, electrical installations, earthworks…
PROPERTIES• Multi-directional valve: use in 360° (upright and upside down)
• Excellent adhesion to miscellaneous surfaces (even damp): concretes, bitumens, grass, wood, etc.
• Quick drying: about 5 min.
• High visibility even from afar thanks to its highly-fluorescent formulation.
• Cap the same colour as the paint.
• Marking period: nine to twelve months depending on the surfaces and application conditions.
• Usage temperatures: -20°C to 50°C.
• Can be used for tunnel and the mining industry.
Ideal Spray is available in a wide range of colours.
IDEAL SPRAY®
WHITERef. 141800
FLUO ORANGERef. 141816
FLUO REDRef. 141813
FLUO YELLOWRef. 141817
FLUO GREENRef. 141818
FLUO BLUERef. 141819
FLUO CHERRY REDRef. 141825
2120
C H A R A C T E R I S T I C S
CONSEILS D’EMPLOISTORAGE & HANDLING
The aerosols should be stored between 15 and 25°C and 50% to 60% relative humidity.Do not expose to a temperature greater than 50°C. Can be stored for up to 4 years prior to use (storage conditions as defined above).Keep away from all ignition and heat sources and direct sunlight.As with any other handling and storage operation, it is especially recommended NOT TO SMOKE.
COMPOSITION
Binder: acrylic.Pigments: lead- and cadmium-free mi-neral and organic.Solvents: complex mix free of chlorina-ted solvents and aromatic compounds (toluene, xylene, etc.)Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually.
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.com.CLP Labelling with one hazard pictograms.
• Do not purge (multi-directional)• Can be used head-up and head-
down, apply -10 cm from the surface to ensure clear and precise marking.
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES
21
The new marking rod is SOPPEC’s answer to the most demanding requirements of ground marking professionals.
PROPERTIES• It is flexible, light and ergonomic thanks to its composite materials and a design focusing
on user comfort.
• It may be customised for your brand (depending on quantities).
• It suits all aerosol sizes and is the essential tool on all sites.
ONE WHEEL APPLICATOR
1 2
4 5 6
31 - Initial stage :
prepare the aerosol for spraying : shake and open or remove the cap.
3 - Place the bottom of the aerosol between the groove and the end stop.
5 - Press the spray trigger.
4 - Press the arrow to move the slider forwards and place the spray correctly in contact with the orange spray part.
6 - Press the arrow to move the slider back and remove the aerosol.
2 - Press the arrow to move the slider back.
RODRef. 441617
2322
The new SOPPEC plastic handle is light and designed for ground marking professionals. New design, new materials - it meets the most exacting user requirements.
PROPERTIESUsable with miscellaneous sizes of aerosol and customisable to your brand, it is also the essential tool for stencilling.
GUN HANDLE
MA
RK
ING
PA
INTS
&
AC
CES
SORI
ES1
4
32
65
1 - Initial stage : pre-pare the aerosol for spraying : shake and open or remove the cap.
3 - Place the bottom of the aerosol between the groove and the end stop.
5 - Press the spray trigger.
2 - Press the arrow to move the slider back.
4 - Press the arrow to move the slider forwards and place the spray correctly in contact with the orange spray part.
6 - Press the arrow to move the slider back and remove the aerosol.
HANDLERef. 432447
23
25
TO MARK
SOPPEC offers a range of products essential
for building and public work activities to
supplement its aerosol paints.
It may be necessary as work progresses on a site to
conceal signboards, mark out at-risk areas and prepare
the work of marking, repairing or maintaining road
surfaces. All these operations require the use of products
in the SOPPEC range.
MASKER SIGN’®
PROTECT MARK
TRACER CHALK LINES
TRACING POWDERS
SIGNALLING TAPES
BITUMINOUS SPRAY
COLD PLANT MIXES
CIVIL ENGINEERING-RELATEDPRODUCTS
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
AEROSOL TEMPORARY MASKINGMASKER SIGN’® can easily conceal signboards and display surfaces temporarily.MASKER SIGN’® is a simple, clean and safe alternative to plastic bags with no risk of being torn off.
PROPERTIES• Water-repellent product, resistant to bad weather.
• Excellent coverage: up to 5 m2 with one aerosol.
• Removed quickly form smooth surfaces with a dry rag.
• Quick drying: 10 to 15 min.
• Operating temperature: -15°C to 50°C.
MASKER SIGN’®
GRAYRef. 142107
2726
C H A R A C T E R I S T I C S
STORAGE & HANDLING
The aerosols should be stored between 15 and 25°C and 50% to 60% relative humidity.Do not expose to a temperature greater than 50°C. Can be stored for up to 4 years prior to use (storage conditions as defined above).Keep away from all ignition and heat sources and direct sunlight.As with any other handling and storage operation, it is especially recommended NOT TO SMOKE.
COMPOSITION
Binder: natural and synthetic waxes.Pigments: lead- and cadmium-free mi-neral and organic.Solvents: complex mix free of chlorina-ted solvents and aromatic compounds (toluene, xylene, etc.)Propellant gas: specific mix of isobu-tane and propane.
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.com.CLP Labelling with two hazard pictograms.
APPLICATION METHOD
Manually or with our application equip-ment (gun handle, see page 21).
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
CONSEILS D’EMPLOI
• Use upright, apply less than 10 cm from the surface.
• BEFORE USE: Shake the upside down downwards to mix the paint properly (you can hear the beads clearly).
• AFTER USE: Purge upside down with the top pointing downwards (until only gas is released) to clean valve and spray.
• Test in advance on certain plastic materials and paints.
• One aerosol can conceal about 5 m2 temporarily.
27
PACKAGINGAerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
AEROSOL PROTECTIVE VARNISHPROTECT MARK protects your chalk line or aerosol markings to keep them visible longer.
PROPERTIES• Prolongs fluorescent marking times thanks to its formulation which withstands
ultraviolet rays and mechanical wear.
• Colourless when applied.
• Drying time: 5 to 10 min.
PROTECT MARK
WHITERef. 142000
2928
C H A R A C T E R I S T I C S
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
STORAGE & HANDLING
The aerosols should be stored between 15 and 25°C and 50% to 60% relative humidity.Do not expose to a temperature greater than 50°C.Keep away from all ignition and heat sources and direct sunlight.As with any other handling and storage operation, it is especially recommended NOT TO SMOKE.
COMPOSITION
Binder: Acrylic resins and waxes.Solvents: complex mix free of chlorina-ted solvents and aromatic compounds (toluene, xylene, etc.).Propellant gas: specific mix of isobu-tane and propane.
APPLICATION METHOD
Manually or with our application equip-ment (rod and gun, see pages 20 and 21).• Can be used.BEFORE USE: shake well upside down.AFTER USE: purge upright.
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.com.No paint running or mist during use thanks to the patented SOPPEC safety cap.
29
PACKAGINGAluminium: in customised SOPPEC hanging cardPlastique: loose or in customised SOPPEC hanging card with one flask of powder 100 g
PACKAGING
All building trades use tracer chalk lines as soon as they have to trace a marker line on the ground or a wall. SOPPEC offers a full range designed for each use: Electricians, Plumbers, Joiners, Plasterers, Masons, Metal-workers, Buildings and Public Works, Floor layers, etc.
CHALKLINES
ALUMINIUMRef. 421503
ORANGE GIANTRef. 421505
ORANGE PLASTIC + FLASK 100 GRef. 421502
ORANGE PLASTICRef. 421501
ORANGE HEXO LINE Ref. 421504
YELLOWRef. 421515
313130
• “AMERICAN LINE” ALUMINIUM OU ABS ORANGE
Electricity/Plumbing/Fitting fix/Masonry
• Aluminium or ABS orange casing.
• Steel crank with free crank pin for better rewinding.
• Crank riveted onto reel axis = solidity.
• Line: 30 metres 1 mm plied cotton (low-end but very strong : about 16 kg breaking strength).
• Sliding trap on the side.
• Very good quality-price ratio line.
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
• “GIANT” LINE Masonry/Building and public works/Outside layouts
• ABS casing: good grip.
• WIDE steel crank with free crank pin for better rewinding.
• Crank riveted onto reel axis = solidity.
• Line: 50 metres 2.5 mm plaited cotton (the line absorbs the powder and reproduces it perfectly).
• Sliding trap on the side.
• Long line for tracing car parks, for example.
• ”HEXO LINE” • ABS casing: good grip.
• WIDE steel crank with free crankpin for better rewinding.
• Crank riveted onto reel axis = solidity.
• Line: 30 metres 1.5 mm plaited cotton (the line absorbs the powder and reproduces it perfectly).
• Elastomer trap on the side.
• “PRACTICAL” LINE• Yellow plaited line, diameter 1.5 mm,
length 100 m.
• Wound onto polypropylene support.
• Detachable handle to wind the line in a marker.
• Simple rewinding thanks to the lower handle and the crank.
• Can be planted in the earth making it useful for outside layout work.
3131
A full range of marking chalk powders is available for use with SOPPEC chalk lines.
PROPERTIES• HIGH QUALITY: excellent coverage.
• Ideal for outside use: withstands UV and bad weather.
• BLUE and RED powder: extensive marking power.
• WHITE and YELLOW powder; colours more easily covered, intended for inside use.
MARKING CHALK POWDERS
PACKAGINGBottle of 400 g.
YELLOWRef. 421702
BLUERef. 421701
REDRef. 421704Ref. 421700
WHITE
NET WEIGHT
400G
3332
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
33
SIGNALLINGTAPESSignalling tapes intended to secure construction sites or mark out events (sports races, hikes).
• ”STANDARD”Two possible colours, red/white or yellow/red.Dimensions: 100 m x 50 mm.
• ”UNTEARABLE”Stronger than the standard tape. Can be used to mark out locations.
Dimensions: 500 m x 75 mm.
RED/WHITERef. 451704C
RED/WHITERef. 451711C
YELLOW/REDRef. 451701C
3534
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
PROPERTIES• Marking resistant to bad weather.
• Wax-based chalks.
• Highly visible: fluorescent red tint.
• Colour intensity.
• Fluorescent chalk specially designed for optical reader.
A wide range of crayons to satisfy the many marking requirements.Marking on all surfaces: metal, dry or damp wood, cardboard, tiles, asphalt and plastic.
LUMBER CRAYONS
CRAYONS HOLDERRef. 42140
FLUORESCENT CRAYONSRef. 421113
REDRef. 421104
GREENRef. 421105
YELLOWRef. 421102
BLUERef. 421101
BLACKRef. 421103
WHITERef. 421100
NON-FLUORESCENT MARKING CRAYONS
35
PACKAGINGAerosol cans, gross volume 800 ml, net volume 600 ml, in boxes of 12.
Bituminous solution in an aerosol usable as bonding primer. It optimises bituminous plant mix work by preparing the surface to be treated properly and improving its adhesion capability.The aerosols preclude the use of tools such as brushes and blades.
PROPERTIES• Easy to use.
• Adhesive and quick drying.
• Can be used even on small, difficult-to-reach surfaces.
BITUMINOUS SPRAY
BLACKRef. 143003
MANHOLE COVERS REPAIR Quick drying and immediate renovating of dusty manhole covers.
ROAD REPAIR Used as adhesion Primer to prepare work on bituminous cold surfaces by adhesion improvement.
3736
C H A R A C T E R I S T I C SSTOCKAGE
The aerosols should be stored between 15 and 25°C and 50% to 60% relative humidity.Do not expose to a temperature greater than 50°C.Keep away from all ignition and heat sources and direct sunlight.As with any other handling and storage operation, it is especially recommended NOT TO SMOKE.
COMPOSITION
Bitumen. Mix of aliphatic and aromatic hydrocarbons.Propellant gas: specific mix of isobutane and propane.
APPLICATION METHOD
• Apply preferably to clean, dry and grease-free surfaces.
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.comAvoid all contact with the eyes (wash immediately).
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
ADVICE ON USE
Use upside down, apply at 25 cm from the surface.• BEFORE USE: Shake upside down
downwards.• AFTER USE: purge upright (until
only gas is released) to clean valve and spray.
37
PACKAGING25 kg bucket.
COLD PLANT MIXES
REDRef. 143104
BLACKRef. 143103
ENROVIT® BLACK OR REDENROVIT® is a bituminous plant mix designed for immediate emergency repairs:• Potholes. • Trenches. • Path and garden maintenance, small repairs.Packaged, storable plant mixes, designed for your emergency uses. The packaging ensures that they keep well and are available immediately.
PROPERTIES• Flexible and draining.
• Particle size: 0/4, 0/6, 0/10.
3938
C H A R A C T E R I S T I C S
CIV
IL E
NG
INEE
RIN
G P
REL
ATE
D P
ROD
UC
TS
STORAGE
Packed in 25 kg buckets. Pallet of 40 buckets, i.e. 1,000 kg. Store away from frost and seal hermetically after use.
COMPOSITION
Cold plant mixes, black or red coarse mix, flexible and draining or semi-dense.Aggregates and sands in accordance with the specifications of standard XP P 18-540.Discontinuous granulometric curve of materials: • ENROVIT® black (0/4, 0/6, 0/10)• ENROVIT® red (2/6 or 0/10)Density: 2% void (for draining mixes) : 15% to 20%
APPLICATION METHOD
1) CreationHaving prepared your surface, lay the plant mix 3 to 5 cm thick (60 to 80 kg/m2). Compact using a roller. Time to go off (solvents starting) : three weeks.
2) MaintenanceClean, sweep and make a clean square (remove debris, mud, etc.). Insert the plant mix to one centimetre above the finished level. Compact using a roller or hand tamper.Consumption: 60 to 80 kg/m2 for 3 to 5 cm thickness.
• To improve adhesion, use the bituminous sprays as bonding primer (see p. 34-35).
HEALTH AND SAFETY
Consult the material safety data sheets free of charge on the Internet: www.quick-fds.com.Avoid all contact with the eyes (wash immediately).
ADVICE ON USE
• Clean in advance with a universal neutral detergent.
39
PRÉSERVELA
COUCHED'OZO
NE
•
www.soppec.com
01-2
016
Z.I. - 16440 NERSAC - FRANCETél. 33 (0)5 45 90 93 12 • Fax 33 (0)5 45 90 58 67
Site internet : www.soppec.com
TO MARK
NO. 1 BRAND YOU CAN TRUST IN EUROPE
C O M P A N Y M E M B E R O F
Distributed in scandinavia by Technima Nordic :Krokslätts torg 5 SE – 431 37 MÖLNDAL. Tel: +46(031)10 21 90
Créd
it ph
otos
: SO
PPEC
, Ju
pite
rImag
es.
Distributed in Central Europe byTechnima Central: Kreuzerweg 1377955 ETTENHEIM- GERMANYTel: +49 7822 78900-0