DIVIDER INSERT HERE: Spider fittings
spiders for glass facades
spid
ers for
glass facad
es
119Online catalogue: www.anzor.co.nz/arch
WHAT ANZOR STOCKS
Spiders – we stock Structural Dynamics Glass `Spyders’ designed for small-to-medium sized projects.
Rod and wire tensioning systems – we also stock rod bracing and wire tensioning components which can be incorporated to support a glass façade structure. For more information, see `Tension Rod’ (p.77) and `Wire Rigging’ (p.93) sections.
Spiders, rod & wire rigging systems for large projects - available on request and made to order.
Structural Dynamics is a world leader in designing, engineering and supplying glass facade systems.
Structural Dynamics engineered and manufactured the truss and spider system for the glass façade of the New International Bangkok Airport. This is one of the world’s largest glass façades at around 1km long and 40m high.
STRuCTuRAl DyNAmICS - glASS SpIDERS
glASS SpIDERS
WHy SpECIFy STRuCTuRAl DyNAmICS SpyDERS?
• High Quality - manufactured by a leader in stainless steel components for glass façade structures. Structural Dynamics have proven themselves in designing and manufacturing the truss and spider systems for many major projects. We are supplying an increasing number of New Zealand projects.
• Fully strength tested with performance data available.
• High corrosion resistance – they are made from 316 Stainless Steel, which is then passivated for additional corrosion resistance.
• Timely delivery - stocks are held in Auckland, and additional stock can be sought with reliable delivery times.
• Competitively priced.
Design notice: The information provided herein are to be used as design recommendations only. Structural Dynamics and its affiliate agents (Anzor) does not assume any responsibility for any injury and/or damage to property or person as a matter of negligence or otherwise, or from any use or operation of any methods, instructions, products or ideas contained in these drawings.
Copyright © 2011 Strudyna
120Online catalogue: www.anzor.co.nz/arch
Product Code: ASDSPYB41CSS200
4 lEg - yB41 SpIDER
plEASE NOTE: Rotules are a separate component. See p.124 for more details.
4 lEg SpIDER
200
200
Free Hole Connection
Slotted Hole Connection
NOTE: the analytic load is for an individual leg of spider, each leg receives the equivalent load.Yield Stress = 241 Mpa. Allowable Stress = 0.7 x 241=168.7 MPa.
P1: Allowable negative wind pressure 2300N
P2: Allowable wind pressure 2500N
P3: Spider allowable dead load 1300N
P4: Rotule allowable dead load 1262N
Spider hole configuration
The 4-leg spider has 2 `free’ holes, and 2 slotted holes.
The two slotted holes on the bottom support the dead load (self weight from the glass below), positive wind load and negative wind load.
The two free holes on the top are attached to the 2 pieces of glass that are above the spider, supporting positive and negative wind loads.
P1
P4P3
P2
M14
pERFORmANCE DATA4 lEg 200 x 200mm SpIDER
- with M14 standard Rotule
FASTENERS TO CONNECT SpIDERS TO RODS
RD Eyenut CNT Bolt
RD Eyenut Connector
Online catalogue: www.anzor.co.nz/spider fittingsInformation used exclusively under permission of Strudyna Co. Ltd
EX-STOCK
SuBJECT
TO pRIOR SAlE
Sold separately - available on request
121Online catalogue: www.anzor.co.nz/arch
Product Code: ASDSPYB21CCN200
2-lEg - yB21 45 DEgREE SpIDER
Product Code: ASDSPYB21HVC200
2-lEg - yB21 STRAIgHT SpIDER
200
100
Ø26
200
100
Ø26
100
100
2 lEg SpIDER - 45° & STRAIgHT
Online catalogue: www.anzor.co.nz/spider-fittingsInformation used exclusively under permission of Strudyna Co. Ltd
EX-STOCK
SuBJECT
TO pRIOR SAlE
EX-STOCK
SuBJECT
TO pRIOR SAlE
122Online catalogue: www.anzor.co.nz/arch
2 lEg - yA24 - lH & RH SpIDER FOR glASS FINSProduct Code: ASDSPYA24NNS200 (LH), ASDSPYA24CSN200 (RH - slotted hole)
10
90
26.5
14.5
200
DID yOu KNOWSpiders can also be clamped either side of a steel cleat that is welded to the roof support structure.
glass Fin
REQuIRES: 2 x M14 x 90 Spyder Double Lock BoltsProduct Code: ASDSPDLBM14 X 9
REQuIRES: 2 x M14 x 90 Spyder Double Lock Bolts.Product code: ASDSPDLBM14 X 9
1 x 14mm x 170 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170
90
26.5
14.5
200
2 lEg SpIDER FOR glASS FINS
Online catalogue: www.anzor.co.nz/spider fittingsInformation used exclusively under permission of Strudyna Co. Ltd
EX-STOCK
SuBJECT
TO pRIOR SAlE
123Online catalogue: www.anzor.co.nz/arch
Product Code: ASDSPYA1400HS90
1 lEg - yA14 SpIDER FOR glASS FINS
glass Fin
REQuIRES: 2 x M14 x 90 Spyder Double Lock Bolts.Product code: ASDSPDLBM14 X 9
1 x 14mm x 140 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170
26
14.5
26
14.5
1 lEg SpIDER FOR glASS FINS
REQuIRES: 2 x M14 x 90 Spyder Double Lock BoltsProduct Code: ASDSPDLBM14 X 9
Online catalogue: www.anzor.co.nz/spider-fittingsInformation used exclusively under permission of Strudyna Co. Ltd
EX-STOCK
SuBJECT
TO pRIOR SAlE
124Online catalogue: www.anzor.co.nz/arch
ROTulE
ROTulE TOOlS
RT T1 RT T2
RT T3 RT T4
All four tools are required for proper installation of rotule sizes M12 - M16.
ROTulE & ROTulE TOOlS
Sizeglass
Thicknessglass Hole
Øproduct code
A Ø (mm)
B Ø (mm)
C (mm)
D (mm)
E (mm)
F Ø (mm)
M12 10-15mm 33.5mm ASDSPR126050 32 50 28 18 25 22
M14 12-16mm 37.5mm ASDSPR147662 36 62 32 25 28 28
M16 16-21mm 43.5mm ASDSPR168570 42 70 37 29 30 28
E
F
D C
A B
ROTulE COuNTERSuNK
E
F
D C
A B
A different size is required for each of M12, M14 & M16
RTT1
RTT2
RTT3
RTT4
The insert secures the ball joint of the centre shaft.
Sizeglass
Thicknessglass Hole
Øproduct code
A Ø (mm)
B Ø (mm)
C (mm)
D (mm)
E (mm)
F Ø (mm)
M14 12-16mm 37.5mm ASDSPR147662 36 47 29 26 28 28
EX-STOCK
SuBJECT
TO pRIOR
SAlE
Online catalogue: www.anzor.co.nz/spider fittingsInformation used exclusively under permission of Strudyna Co. Ltd
EX-STOCK
SuBJECT
TO pRIOR
SAlE
EX-STOCK
SuBJECT
TO pRIOR
SAlE