* Not applicable to JSK models
STAINLESS STEEL SELF-PRIMING JET PUMPS
JS SERIES
• Stainless Steel Casing • Precision-moulded internals • Robust stainless steel base• Self-priming with up to 7.6m suction lift• JSP models offer loss of prime protection• Pump made in Italy with highest quality
KEY FEATURES
ONGA.COM.AU
STAINLESS STEEL SELF-PRIMING JET PUMPS
• Enclosed fan-cooled motor• Protection rating IP 44• Insulation class F• Singe phase power supply with permanently
activated capacitor• Thermal protection incorporated in motor
winding• Continuous duty
MOTOR
• Ideal for installations with below ground water source
• Domestic water supply systems with continuous or intermittent duty
• Small farms and gardening irrigation• Small scale industrial service • Pressure boosting • General water transfer
APPLICATIONS
• Type of liquid: clean water without suspended bodies or abrasive material that is non-viscous and chemically neutral
• Maximum liquid temperature: 50°C• Maximum ambient temperature: 40°C• Maximum suction depth: 7.6m with foot valve • Maximum operating pressure: 6 Bar
USAGE DATA
The new JS range of household pressure pumps feature a strong stainless steel pump casings with precision moulded jet, venturi and impeller for efficiency and great performance under high suction lift applications.
The new Italian made JS series is now mounted on a stable, high quality stainless steel base for protection from corrosion. With 3 models in the range, the JS is also available with a Presscontrol or Pressure Switch and Tank making a perfect household water pressure system.
The JS series offer the following advantages:• Peace of mind reliability – thanks to the robust
design• Stainless steel casing with excellent corrosion
resistance and toughness • Precision-moulded internals for high
performance and reliability• Self-priming with excellent suction capacity
to a maximum depth of 7.6m• Robust stainless steel base to lift pump above
corrosive water on the ground • Italian made with quality construction • Loss of prime protection for JSP models,
protects pump from failure
JS SERIES
STAINLESS STEEL SELF-PRIMING JET PUMPS
The self-priming pumps in the JETINOX range combine the advantages and practical features of centrifugal pumps with the functionality of self-priming pumps, as well as quality performance. The Venturi pipe system on these pumps guarantees optimal hydraulic performance and impressive suction capacity, maintaining priming even in the presence of air or gas bubbles trapped in the water.
• Lifting and distribution of water in domestic systems, with continuous or intermittent duty.
• Pressure booster systems.
• Washing, irrigation of vegetable gardens, supply to fountains, transfers.
• Lifting from wells or cisterns.
APPLICATIONS
USAGE DATA
• Type of liquid: clean water without suspended solid bodies or abrasive material.
• Maximum liquid temperature: 50°C.
• Maximum recommended suction height: 8 m with foot valve.
• Maximum operating pressure: 6 bar.
• Closed, ventilated from exterior.
• Protection rating IP 44.
• Insulation class F.
• Singe phase power supply with permanently activated capacitor.
• Thermal cutout protection incorporated in motor winding.
• Rotation speed 2850 rpm.
• Continuous duty.
MOTOR
Component Material
1 Pump body Stainless steel X5 CrNi 1810 (AISI 304)
2 Motor casing Die-cast aluminium
3 ImpellerTechnopolymer with stainless steel
shim ring
4Diffuser monobloc group
Venturi tube-nozzleTechnopolymer
5 Shaft Stainless steel X 12 CrNiS 1809 (AISI 416)
6 Mechanical seal Graphite
7 Counterface Ceramic
8 Seal holder plateTechnopolymer (series 45-60-70)
Stainless steel X5 CrNi 1810 ( AISI 304 ) series 90
9 Gaskets NBR 70 Shore
TABLE OF MATERIALS
Self-priming, high intake capacity
STAINLESS STEEL SELF-PRIMING PUMPSJETINOX
REF. COMPONENT MATERIAL
1 PUMP BODY Stainless steel X5 CrNi 1810 (AISI 304)
2 MOTOR CASING Die-cast aluminium
3 IMPELLER Technopolymer with stainless steel shim ring
4 DIFFUSER MONO BLOCK GROUP VENTURI TUBE-NOZZLE Technopolymer
5 SHAFT Stainless steel X 12 CrNiS 1809 (AISI 416)
6 MECHANICAL SEAL Graphite
7 COUNTERFACE Ceramic
8 SEAL HOLDER PLATE Technopolymer (series 45-60-70)Stainless steel X5 CrNi 1810 ( AISI 304) series 90
9 GASKETS NBR 70 Shore
TABLE OF MATERIALS
JS SERIES
L100
387
111
9
A
G
I
E
C
PLUG G 1/8"
PLUG G 1/8"
nr.4 HOLESØ 10.5mm
Ø D
NA
B
Ø DNM
PUMP MODEL
Dimensions [mm] Weight [kg]A B C D E F G I Ø DNA Ø DNM
JS 45 141 351 141 210 176.5 194 87 161.5 1" F 1" F 7
JS 60 141 370 141 218 176.5 194 87 161.5 1" F 1" F 9
JS 90 168.5 424 196 241 233 225 98 186.5 1" 1/4 M 1" F 13
PUMP MODEL
Dimensions [mm] Weight [kg]A B C D E F G I Ø DNA Ø DNM
JS 45 141 351 141 210 176.5 194 87 161.5 1" F 1" F 7
JS 60 141 370 141 218 176.5 194 87 161.5 1" F 1" F 9
JS 90 168.5 424 196 241 233 225 98 186.5 1" 1/4 M 1" F 13
N. DISEGNO
FOGLIO 1 DI 1
A0
PESO:
JS60
A A
B B
C C
D D
E E
F F
G G
H H
J J
K K
L L
M M
N N
P P
R R
T T
24
24
23
23
22
22
21
21
20
20
19
19
18
18
17
17
16
16
15
15
14
14
13
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
DISEG.
MATERIALE:
REVISIONE
TITOLO:
SCALA:1:2
NON SCALARE DISEGNO
VERIF.
APPR.
FABB.
Qual.
ANGOLARE:
FINITURA:
LINEARE:
BORDI NETTI
NOME FIRMA DATA
SE NON SPECIFICATO:
QUOTE IN MILLIMETRI
FINITURA SUPERFICIE:
TOLLERANZE:
INTERRUZIONE
JETINOX 60/50 C
F D
1-21 Monash Drive | Dandenong South, VIC 3175 | Australia | 1300 137 344 | pentair.com.auInformation contained here-in remains the property of Pentair Australia Holdings Pty Ltd under Australian copyright law. Content may not be reproduced or transmitted without our prior written permission.
© 2019 Pentair. All rights reserved. This document is subject to change without notice.
PERFORMANCE TABLEPART # MODEL
Nominalpower (P2)
Absorbed power (P1) Voltage
(V)In
(A) μF Ql/min 0 10 20 30 40 50 60 70 80
HP kW HP kW m3/h 0 0,6 1,2 1,8 2,4 3 3,6 4,8JS45 JS 45 0,5 0,37 0,8 0,6 1 ~ 230 3 8
Hea
d (m
) 43 30 23 16 1 - - - -JS60 JS 60 0,75 0,55 1,1 0,8 1 ~ 230 4 12,5 46 36 31 26 18 6 - - -JS90 JS 90 1,0 0,75 1,8 1,3 1 ~ 230 6,5 20 43 38 34 32 29 27 25 21 10
PART # MODELDimensions mm. Outlet Height
w/ PressControl (mm)
Weight(Kg)A B C D E F G G DNA DNM
JS45 JS 45 141 351 141 210 176.5 194 87 161.5 1” F 1" F 422 7
JS60 JS 60 141 370 141 218 176.5 194 87 161.5 1” F 1” F 422 9
JS90 JS 90 168.5 424 196 241 233 225 98 186.5 1” 1/4 F 1" F 453 13
OVERALL DIMENSIONS & WEIGHTS
HEA
D (m
)
FLOW RATE (lpm)
JS PUMP + PRESS CONTROL60
50
40
30
20
10
0
60
50
40
30
20
10
010 20 30 40 50 60 70 80 90 10 20 30 40 50 60 70 80 90
HEA
D (m
)
FLOW RATE (lpm)
JS PUMP
JS90JSK90
JSP90
JSP60
JSP45
JS60JSK60
JS45JSK45