Industry: Steel & MetalsApplication: Rolling MillsCost Savings: EUR46,190
IntroductionThe rod mill chocks in the plant of a steel manufacturer were fitted incorrectly with the incorrect spacers, causingfailures and the need to source high cost urgent replacement bearings. Maintenance staff unaware of the spacercalculation, they work off a Standard Operating Procedure that was 20 years old. Correct fitting instructionspresented and demonstrated. NSK engineers were present during replacement and trained the staff on fittingpractices. Genuine NSK bearing replaced the current high cost bearings with significant savings at purchase.Customer standard operating procedure with spacer calculations updated and re issued.
Steel Industry
Key FactsBearings were incorrect assembled and the staff was not trained Old Standard Operating Procedure 5 breakdowns per yearUrgent replacements at high costs
Value ProposalsNSK Engineer to train staffCorrect fitting calculations for spacers supplied by NSKScheduled replacements at competitive pricing levels
NSK Europe Ltd. – www.nskeurope.com SS-en_GB-2-585
Product FeaturesHigh load, high speed, high temperatureHigh quality steelOptimised internal designHigh tech ball guided cages (polymers or machined brass)Reduced heat generation, vibration & noiseEasy handling & installation due to universal facing
Angular Contact Ball Bearings
Cost Saving Breakdown
Previous Solution Costs p.a. NSK Solution Costs p.a.
Bearing costs €8,736 Bearing costs €3,494
Engineering costs €655 Engineering costs €0
Cost of lost production €40,294 Cost of lost production €0
Total Costs €49,685 €3,494
Powered by TCPDF (www.tcpdf.org)
NSK Europe Ltd. – www.nskeurope.com SS-en_GB-2-585