Oracle Internal & OAI Use Only
11i Purchasing for End Users Student Guide • Volume 2
D16657GC10
Edition 1.0
April 2003
D37960
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
This documentation contains proprietary information of Oracle Corporation. It is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. If this documentation is delivered to a U.S. Government Agency of the Department of Defense, then it is delivered with Restricted Rights and the following legend is applicable:
Restricted Rights Legend
Use, duplication or disclosure by the Government is subject to restrictions for commercial computer software and shall be deemed to be Restricted Rights software under Federal law, as set forth in subparagraph (c)(1)(ii) of DFARS 252.227-7013, Rights in Technical Data and Computer Software (October 1988).
This material or any portion of it may not be copied in any form or by any means without the express prior written permission of the Education Products group of Oracle Corporation. Any other copying is a violation of copyright law and may result in civil and/or criminal penalties.
If this documentation is delivered to a U.S. Government Agency not within the Department of Defense, then it is delivered with “Restricted Rights,” as defined in FAR 52.227-14, Rights in Data-General, including Alternate III (June 1987).
The information in this document is subject to change without notice. If you find any problems in the documentation, please report them in writing to Worldwide Education Services, Oracle Corporation, 500 Oracle Parkway, Box SB-6, Redwood Shores, CA 94065. Oracle Corporation does not warrant that this document is error-free.
Oracle and all references to Oracle Products are trademarks or registered trademarks of Oracle Corporation.
All other products or company names are used for identification purposes only, and may be trademarks of their respective owners.
Author
Paul Scott, Todd Round, Deanna McMillian
Technical Contributors and Reviewers
Terri North, Jim Ammons, Vic Mitchell, Rachel Korte, Shridhar Acharya
This book was published using: oracletutor
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents i
Table of Contents
Procure to Pay Purchasing Overview ............................................................................................................1-1 Procure to Pay Purchasing Overview ............................................................................................................1-2 Procure to Pay Lifecycle................................................................................................................................1-3 Objectives ......................................................................................................................................................1-4 Agenda...........................................................................................................................................................1-5 Overview of Purchasing Process ...................................................................................................................1-6 Overview of Requisitions ..............................................................................................................................1-8 Overview of Requisition to Order Document................................................................................................1-10 Overview of Purchase Order Process ............................................................................................................1-11 Overview of Receiving Process.....................................................................................................................1-13 Agenda...........................................................................................................................................................1-16 Overview of Purchasing Integration ..............................................................................................................1-17 Purchasing Integration with General Ledger .................................................................................................1-22 Purchasing Integration with Payables............................................................................................................1-23 Purchasing Integration with Cash Management ............................................................................................1-24 Purchasing Integration with Projects .............................................................................................................1-25 Purchasing Integration with ASCP/MRP ......................................................................................................1-26 Purchasing Integration with e-Commerce Gateway ......................................................................................1-27 Purchasing Integration with Human Resources.............................................................................................1-28 Purchasing Integration with Quality ..............................................................................................................1-29 Purchasing Integration with Inventory ..........................................................................................................1-30 Purchasing Integration with Alert..................................................................................................................1-31 Purchasing Integration with Workflow..........................................................................................................1-32 Purchasing Integration with iSupplier Portal.................................................................................................1-34 Purchasing Integration with Assets................................................................................................................1-36 Purchasing Integration with WIP...................................................................................................................1-37 Purchasing Integration with Order Management ...........................................................................................1-38 Summary........................................................................................................................................................1-39
Suppliers...........................................................................................................................................................2-1 Suppliers ........................................................................................................................................................2-2 Procure to Pay Lifecycle................................................................................................................................2-3 Objectives ......................................................................................................................................................2-4 Agenda...........................................................................................................................................................2-5 How Oracle Products Use Supplier Information ...........................................................................................2-6 Overview of Suppliers ...................................................................................................................................2-7 Flow of Default Values..................................................................................................................................2-8 Agenda...........................................................................................................................................................2-9 Supplier Record Structure..............................................................................................................................2-10 Entering Basic Supplier Header Information.................................................................................................2-11 Supplier Information - General Region .........................................................................................................2-13 Supplier Information - Classification Region ................................................................................................2-14 Supplier Information - Accounting Region ...................................................................................................2-16 Supplier Information - Control Region..........................................................................................................2-17 Supplier Information - Payment Region........................................................................................................2-19 Supplier Information - Bank Accounts Region .............................................................................................2-21 Supplier Information - EDI Region ...............................................................................................................2-22 Supplier Information - Invoice Tax Region...................................................................................................2-23 Supplier Information - Withholding Tax Region...........................................................................................2-24 Supplier Information - Tax Reporting Region...............................................................................................2-25 Supplier Information - Purchasing Region ....................................................................................................2-26 Supplier Information - Receiving Region......................................................................................................2-28 Supplier Site Settings.....................................................................................................................................2-30
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents ii
Supplier Level Versus Site Level Entry ........................................................................................................2-31 Entering Basic Supplier Site Information.....................................................................................................2-32 Supplier Site Information - General Region ..................................................................................................2-33 Supplier Site Information - Contacts Region.................................................................................................2-35 Supplier Site Information - Accounting Region ............................................................................................2-36 Supplier Site Information - EDI Region ........................................................................................................2-37 Supplier Site Information - Tax Reporting Region........................................................................................2-38 Supplier Site Information - Purchasing Region .............................................................................................2-39
Guided Demonstration - Create a New Employee (Required)...................................................................2-40 Guided Demonstration - Run the Fill Employee Hierarchy Process (Required) .......................................2-42 Guided Demonstration - Create a New Responsibility (Required)............................................................2-43 Guided Demonstration - Create a New User (Required) ...........................................................................2-45 Guided Demonstration - Add Notifications to your Personal Home Page (Required) ..............................2-47 Guided Demonstration - Set Yourself up as a Buyer (Required)...............................................................2-48 Guided Demonstration - Create a Supplier (Required)..............................................................................2-49 Practice - Define a Supplier .......................................................................................................................2-53 Solution - Define a Supplier ......................................................................................................................2-54 Practice - Adjust a Supplier Site ................................................................................................................2-62 Solution - Adjust a Supplier Site ...............................................................................................................2-63
Maintaining Supplier and Supplier Site Information.....................................................................................2-66 Avoiding Duplicate Suppliers........................................................................................................................2-67 Merging Suppliers .........................................................................................................................................2-69 Data Example - Supplier Merge ....................................................................................................................2-71 Merging Suppliers .........................................................................................................................................2-72 Agenda...........................................................................................................................................................2-73 Reports...........................................................................................................................................................2-74 Summary........................................................................................................................................................2-77
Locations, Organizations, Units of Measure and Items ...............................................................................3-1 Locations, Organizations, Units of Measure and Items .................................................................................3-2 Agenda...........................................................................................................................................................3-3 What Is an Item?............................................................................................................................................3-4 Oracle Applications Use Items ......................................................................................................................3-5 How Do Oracle Applications Use Items?......................................................................................................3-6 Item Attributes...............................................................................................................................................3-8 Items Have Statuses Which Represent the Life Cycle of the Item ................................................................3-10 Item Attributes Used in Item Status...............................................................................................................3-12 Item Master Organization and Child Organizations ......................................................................................3-14 Creating an Item ............................................................................................................................................3-16 Setup, Define and Maintain Items .................................................................................................................3-17 Describing Attribute Control at Master Level ...............................................................................................3-20 Describing Attribute Control at Child Level .................................................................................................3-22 Describing Item Status Attribute Controls.....................................................................................................3-24 Describing Status Attribute Dependencies ....................................................................................................3-26 Describing Item Attributes - Inventory..........................................................................................................3-27 Describing Item Attributes - Purchasing .......................................................................................................3-31 Describing Item Attributes - Receiving .........................................................................................................3-36
Guided Demonstration - Create an Expense Item (Required) ...................................................................3-39 Guided Demonstration - Create an Inventory Item (Required)..................................................................3-41 Guided Demonstration - Create an Item for a Routinely Purchased Asset (Required)..............................3-43 Practice - Create Items...............................................................................................................................3-45 Solution - Create Items ..............................................................................................................................3-48
Define Item Relationships - Purchasing ........................................................................................................3-56 Agenda...........................................................................................................................................................3-58 Describing Item Templates............................................................................................................................3-59 Creating Item Templates ...............................................................................................................................3-60 Using Item Templates....................................................................................................................................3-62
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents iii
Example of Using a Template .......................................................................................................................3-63 Additional Setup Considerations ...................................................................................................................3-64 Summary........................................................................................................................................................3-66
RFQs and Quotations......................................................................................................................................4-1 RFQs and Quotations.....................................................................................................................................4-2 Procure to Pay Lifecycle................................................................................................................................4-3 Objectives ......................................................................................................................................................4-4 Agenda...........................................................................................................................................................4-5 RFQs and Quotations.....................................................................................................................................4-6 Agenda...........................................................................................................................................................4-7 Request for Quotation....................................................................................................................................4-8 RFQ Lifecycle ...............................................................................................................................................4-10 Send Notifications .........................................................................................................................................4-11 RFQ Types.....................................................................................................................................................4-12 Supplier List ..................................................................................................................................................4-13
Guided Demonstration - Create a Supplier List (Required).......................................................................4-14 Practice - Create a Supplier List ................................................................................................................4-15 Solution - Create a Supplier List................................................................................................................4-16
RFQ Structure................................................................................................................................................4-18 RFQ Header...................................................................................................................................................4-19 RFQ Lines .....................................................................................................................................................4-21 RFQ Price Breaks/Shipments ........................................................................................................................4-23
Guided Demonstration - Create a Catalog RFQ (Required) ......................................................................4-24 Practice - Create a Catalog RFQ................................................................................................................4-27 Solution - Create a Catalog RFQ ...............................................................................................................4-31
Agenda...........................................................................................................................................................4-44 Quotations......................................................................................................................................................4-45 Quotation Lifecycle .......................................................................................................................................4-47 Send Notifications .........................................................................................................................................4-48 Quotation Types ............................................................................................................................................4-49 Quotation Structure........................................................................................................................................4-50 Quotation Header...........................................................................................................................................4-51 Quotation Lines .............................................................................................................................................4-53 Quotation Price Breaks/Shipments ................................................................................................................4-55 Quotation Approvals......................................................................................................................................4-56
Guided Demonstration - Create a Catalog Quote from an RFQ (Required) ..............................................4-57 Guided Demonstration - Schedule the Send Notifications for Purchasing Documents Process (Required)...................................................................................................................................................................4-60 Practice - Create a Catalog Quote from an RFQ........................................................................................4-61 Solution - Create a Catalog Quote from an RFQ.......................................................................................4-63
Agenda...........................................................................................................................................................4-68 Reports...........................................................................................................................................................4-69 Summary........................................................................................................................................................4-71
Approved Supplier Lists and Sourcing Rules ...............................................................................................5-1 Approved Supplier Lists and Sourcing Rules................................................................................................5-2 Procure to Pay Lifecycle................................................................................................................................5-3 Objectives ......................................................................................................................................................5-4 Agenda...........................................................................................................................................................5-5 Approved Supplier Lists ................................................................................................................................5-6 Supplier Statuses ...........................................................................................................................................5-7
Guided Demonstration - Create an Approved Supplier List Status (Required) .........................................5-9 Practice - Create an Approved Supplier List Status...................................................................................5-10 Solution - Create an Approved Supplier List.............................................................................................5-11
ASL Common Header Attributes ..................................................................................................................5-13 ASL Header Attributes - Item........................................................................................................................5-15 ASL Header Attributes - Commodity............................................................................................................5-16
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents iv
Supplier-Commodity/Item Attributes ............................................................................................................5-18 Supplier-Commodity/Item Attributes Source Document ..............................................................................5-21 Supplier-Commodity/Item Attributes Supplier Scheduling...........................................................................5-23 Supplier-Commodity/Item Attributes Planning Constraints..........................................................................5-25
Guided Demonstration - Require an Approved Supplier for an Item (Required) ......................................5-27 Guided Demonstration - Create an Approved Supplier List (Required)....................................................5-29 Practice - Require an Approved Supplier for an Item................................................................................5-31 Solution - Require an Approved Supplier for an Item ...............................................................................5-33 Practice - Create an Approved Supplier List .............................................................................................5-38 Solution - Create an Approved Supplier List.............................................................................................5-40
Agenda...........................................................................................................................................................5-45 Sourcing Rules Overview..............................................................................................................................5-46 Sourcing Rules...............................................................................................................................................5-47 Oracle Products That Use Sourcing Rules.....................................................................................................5-49 Create a Sourcing Rule ..................................................................................................................................5-50 Create a Sourcing Rule Assignment ..............................................................................................................5-51 Levels of Sourcing Rule Assignments...........................................................................................................5-53 Sourcing Rules with an ASL Source Document............................................................................................5-54 Sourcing Rules without an ASL Source Document.......................................................................................5-55 Default Sourcing Information to Requisitions...............................................................................................5-56 Default Sourcing Information to Standard Purchase Orders .........................................................................5-57
Guided Demonstration - Create a Sourcing Rule and a Sourcing Rule Assignment (Required) ...............5-58 Guided Demonstration - Enable Automatic Document Sourcing (Required)............................................5-62 Practice - Create a Sourcing Rule and a Sourcing Rule Assignment.........................................................5-64 Solution - Create a Sourcing Rule and a Sourcing Rule Assignment ........................................................5-67 Practice - Enable Automatic Document Sourcing .....................................................................................5-72 Solution - Enable Automatic Document Sourcing.....................................................................................5-73
Summary........................................................................................................................................................5-74 Requisitions ......................................................................................................................................................6-1
Requisitions ...................................................................................................................................................6-2 Procure to Pay Lifecycle................................................................................................................................6-3 Objectives ......................................................................................................................................................6-4 Agenda...........................................................................................................................................................6-5 Where Purchase Requisitions Fit...................................................................................................................6-6 Requisition Lifecycle.....................................................................................................................................6-7 Send Notifications .........................................................................................................................................6-8 Agenda...........................................................................................................................................................6-9 Requisition Structure .....................................................................................................................................6-10 Requisition Preferences .................................................................................................................................6-11 Requisition Header ........................................................................................................................................6-13 Requisition Line ............................................................................................................................................6-15
Guided Demonstration - Create a Purchase Requisition (Required)..........................................................6-19 Practice - Create a Purchase Requisition ...................................................................................................6-21 Solution - Create a Purchase Requisition...................................................................................................6-23
Agenda...........................................................................................................................................................6-30 Supplier Item Catalog....................................................................................................................................6-31 Using the Supplier Item Catalog....................................................................................................................6-32
Guided Demonstration - Create a Requisition Template (Required).........................................................6-33 Guided Demonstration - Use the Supplier Item Catalog to Create a Requisition (Required)....................6-35 Practice - Create a Requisition Template...................................................................................................6-37 Solution - Create a Requisition Template..................................................................................................6-39 Practice - Use the Supplier Item Catalog to Create a Requisition .............................................................6-42 Solution - Use the Supplier Item Catalog to Create a Requisition.............................................................6-43
Requisition Distribution ................................................................................................................................6-47 Allocating Costs to Multiple Charge Accounts .............................................................................................6-49 Submitting Requisitions for Approval...........................................................................................................6-50
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents v
Approving Requisitions.................................................................................................................................6-51 Requisition Templates ...................................................................................................................................6-52 Requisition Actions .......................................................................................................................................6-53 Agenda...........................................................................................................................................................6-54 Reports...........................................................................................................................................................6-55 Summary........................................................................................................................................................6-57
Purchase Orders ..............................................................................................................................................7-1 Purchase Orders.............................................................................................................................................7-2 Procure to Pay Lifecycle................................................................................................................................7-3 Objectives ......................................................................................................................................................7-4 Agenda...........................................................................................................................................................7-5 Purchase Order Types....................................................................................................................................7-6 Purchase Orders.............................................................................................................................................7-8 Purchase Order Components and Record Structure.......................................................................................7-9 Overview of AutoCreated Purchase Orders...................................................................................................7-11 Agenda...........................................................................................................................................................7-13 Overview of Standard Purchase Orders.........................................................................................................7-14 Simplify the Entry of Purchase Orders: Preferences .....................................................................................7-15 Standard Purchase Order Elements................................................................................................................7-17 Structure of a Simple Standard Purchase Order ............................................................................................7-18 Structure of a More Complex Standard Purchase Order................................................................................7-19 Entering Standard Purchase Order Header Information ................................................................................7-20 Standard Purchase Orders Terms and Conditions .........................................................................................7-22 Entering Standard Purchase Order Lines Tabbed Regions............................................................................7-24 Standard Purchase Order Line Items Tabbed Region....................................................................................7-25 Standard Purchase Order Line Price Reference Tabbed Region ...................................................................7-27 Standard Purchase Order Line Reference Documents Tabbed Region..........................................................7-28 Standard Purchase Order Line More Tabbed Region ....................................................................................7-30 Entering Standard Purchase Order Shipments - Tabbed Regions..................................................................7-31 Standard Purchase Order Shipment Shipments Tabbed Region ....................................................................7-32 Standard Purchase Order Shipment More Tabbed Region ............................................................................7-34 Standard Purchase Order Shipment Status Tabbed Region ...........................................................................7-36 Standard Purchase Order Shipment Receiving Controls Button....................................................................7-37 Entering Standard Purchase Order Distributions - Tabbed Regions..............................................................7-38 Standard Purchase Order Distribution Destination Tabbed Region ..............................................................7-39 Standard Purchase Order Distribution More Tabbed Region ........................................................................7-41 Standard Purchase Order Distribution Project Tabbed Region......................................................................7-42 Approve Standard Purchase Order ................................................................................................................7-43
Guided Demonstration - Create a Standard Purchase Order (Required) ...................................................7-44 Practice - Create a Standard Purchase Order .............................................................................................7-50 Solution - Create a Standard Purchase Order.............................................................................................7-52
Agenda...........................................................................................................................................................7-64 When to Use a Blanket Purchase Agreement ................................................................................................7-65 Blanket Releases............................................................................................................................................7-66 Blanket Purchase Agreements Additional Information Entered....................................................................7-68 Blanket Purchase Agreements Additional Information - Header ..................................................................7-69 Blanket Purchase Agreements Additional Information - Lines .....................................................................7-71 Blanket Purchase Agreements Additional Information - Price Breaks..........................................................7-73 Notification Controls .....................................................................................................................................7-75 Approve Blanket Purchase Agreement..........................................................................................................7-77
Guided Demonstration - Create a Blanket Purchase Agreement (Required).............................................7-78 Blanket Purchase Agreement and Blanket Releases......................................................................................7-81 Blanket Releases Structure - Header .............................................................................................................7-82 Blanket Releases Structure Shipments and Distributions ..............................................................................7-84
Guided Demonstration - Create a Blanket Release (Required) .................................................................7-85 Practice - Create a Blanket Purchase Agreement and Blanket Release .....................................................7-86
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents vi
Solution - Create a Blanket Purchase Agreement and Blanket Release ....................................................7-88 Agenda...........................................................................................................................................................7-98 When to Use a Contract Purchase Agreement...............................................................................................7-99 Contract Purchase Agreements Additional Information Entered...................................................................7-100 Standard Purchase Order Line Reference Documents Tabbed Region..........................................................7-102
Guided Demonstration - Create a Contract Purchase Agreement (Required)............................................7-104 Practice - Create a Contract Purchase Agreement .....................................................................................7-106 Solution - Create a Contract Purchase Agreement.....................................................................................7-107
Agenda...........................................................................................................................................................7-113 Purchase Order Inquiry..................................................................................................................................7-114 Modifying Purchase Orders...........................................................................................................................7-116 Printing Purchase Orders ...............................................................................................................................7-118 Creating Purchase Order Revisions ...............................................................................................................7-119 Archiving Purchase Orders............................................................................................................................7-120 Purchase Order Statuses - Typical Cycle.......................................................................................................7-121 Entering Purchase Order Acceptances...........................................................................................................7-124 Workflow Notifications.................................................................................................................................7-126 Copying Purchase Orders ..............................................................................................................................7-127 Agenda...........................................................................................................................................................7-129 Reports...........................................................................................................................................................7-130 Summary........................................................................................................................................................7-134
Automatic Document Creation.......................................................................................................................8-1 Automatic Document Creation ......................................................................................................................8-2 Procure to Pay Lifecycle................................................................................................................................8-3 Objectives ......................................................................................................................................................8-4 Agenda...........................................................................................................................................................8-5 Creating Purchase Documents from Requisitions .........................................................................................8-6 Benefits of Using AutoCreate........................................................................................................................8-8 Overview of AutoCreate................................................................................................................................8-9 Automatic Creation Mode .............................................................................................................................8-11 Find Requisition Lines...................................................................................................................................8-12 Select Document Creation Criteria ................................................................................................................8-14 Select Requisition Lines ................................................................................................................................8-16 Select Automatic Creation Mode...................................................................................................................8-17 Autocreate New Document Window.............................................................................................................8-18 Manual Creation Mode..................................................................................................................................8-19 Add to Existing Document ............................................................................................................................8-20 Modify Requisition Lines..............................................................................................................................8-21 Return Requisition Lines ...............................................................................................................................8-22
Guided Demonstration - Return a Requisition (Required) ........................................................................8-23 Guided Demonstration - AutoCreate a Purchase Order (Required)...........................................................8-25 Practice - Return a Requisition ..................................................................................................................8-26 Solution - Return a Requisition .................................................................................................................8-29 Practice - AutoCreate a Purchase Order ....................................................................................................8-38 Solution - AutoCreate a Purchase Order....................................................................................................8-39
Summary........................................................................................................................................................8-42 Receiving ..........................................................................................................................................................9-1
Receiving.......................................................................................................................................................9-2 Procure to Pay Lifecycle................................................................................................................................9-3 Objectives ......................................................................................................................................................9-4 Agenda...........................................................................................................................................................9-5 Receiving.......................................................................................................................................................9-6 Overview of Receiving Locations .................................................................................................................9-8 Agenda...........................................................................................................................................................9-9 Overview of Receipt Routing ........................................................................................................................9-10 Direct Delivery ..............................................................................................................................................9-11
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents vii
Standard Receipt............................................................................................................................................9-12 Inspection Required.......................................................................................................................................9-13 Agenda...........................................................................................................................................................9-14 Receipt Processing Methods..........................................................................................................................9-15 Standard Receipt............................................................................................................................................9-17 Express Receipt .............................................................................................................................................9-18 Cascade Receipt.............................................................................................................................................9-19 ASNs and ASBNs..........................................................................................................................................9-20 Receiving in iProcurement ............................................................................................................................9-21 Receiving Open Interface ..............................................................................................................................9-22 Finding Expected Receipts ............................................................................................................................9-23 Receipt Header ..............................................................................................................................................9-25 Receipt Line...................................................................................................................................................9-27
Guided Demonstration - Create a Standard Purchase Order (Required) ...................................................9-29 Guided Demonstration - Create a Standard Receipt (Required) ................................................................9-34 Guided Demonstration - Create an Express Receipt (Required) ...............................................................9-36 Guided Demonstration - Create a Cascade Receipt (Required).................................................................9-38 Practice - Create Items...............................................................................................................................9-40 Solution - Create Items ..............................................................................................................................9-43 Practice - Create a Standard Purchase Order .............................................................................................9-51 Solution - Create a Standard Purchase Order.............................................................................................9-54 Practice - Create a Standard Receipt..........................................................................................................9-61 Solution - Create a Standard Receipt .........................................................................................................9-63 Practice - Create an Express Receipt .........................................................................................................9-65 Solution - Create an Express Receipt.........................................................................................................9-67 Practice - Create a Cascade Receipt ..........................................................................................................9-69 Solution - Create a Cascade Receipt..........................................................................................................9-71
Control the Receiving Transaction Processor................................................................................................9-74 Receiving Tolerances ....................................................................................................................................9-76 Control Numbers ...........................................................................................................................................9-77 Agenda...........................................................................................................................................................9-78 Substitute Receipts ........................................................................................................................................9-79 Unordered Receipts .......................................................................................................................................9-80 Overview of Returns and Corrections ...........................................................................................................9-81 Entering Returns ............................................................................................................................................9-82 Entering Corrections......................................................................................................................................9-83 Difference between Returns and Corrections ................................................................................................9-84
Guided Demonstration - Inspect and Deliver a Receipt (Required) ..........................................................9-85 Guided Demonstration - Process a Return to Supplier (Optional).............................................................9-87 Guided Demonstration - Correct a Receiving Error (Optional).................................................................9-89 Practice - Inspect and Deliver a Receipt ....................................................................................................9-91 Solution - Inspect and Deliver a Receipt ...................................................................................................9-93 Practice - Process a Return to Supplier......................................................................................................9-96 Solution - Process a Return to Supplier .....................................................................................................9-98 Practice - Correct a Receiving Error..........................................................................................................9-100 Solution - Correct a Receiving Error .........................................................................................................9-102
Overview of Pay on Receipt ..........................................................................................................................9-105 Agenda...........................................................................................................................................................9-107 Reports...........................................................................................................................................................9-108 Summary........................................................................................................................................................9-111
Oracle Internal & OAI Use Only
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents ix
Preface
Profile
Prerequisites
• 11i Navigating Oracle Applications
• 11i Essentials for Implementers.
How This Course Is Organized
This is an instructor-led course featuring lecture and hands-on exercises. Online demonstrations and written practice sessions reinforce the concepts and skills introduced.
Related Publications
Oracle Publications
Title Part Number
Oracle Payables User’s Guide A81180-03
Oracle Purchasing User’s Guide A82913-01
Oracle iProcurement Installation Guide A85343-02
Oracle Inventory User’s Guide A83507-03
Implementing Oracle HRMS (US) A75314-02
Additional Publications
• System release bulletins
• Installation and user’s guides
• read.me files
• Oracle Magazine
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents x
Typographic Conventions
Typographic Conventions in Text Convention Element Example Bold italic Glossary term (if
there is a glossary)
The algorithm inserts the new key.
Caps and lowercase
Buttons, check boxes, triggers, windows
Click the Executable button. Select the Can’t Delete Card check box. Assign a When-Validate-Item trigger to the ORD block. Open the Master Schedule window.
Courier new, case sensitive (default is lowercase)
Code output, directory names, filenames, passwords, pathnames, URLs, user input, usernames
Code output: debug.set (‘I”, 300); Directory: bin (DOS), $FMHOME (UNIX) Filename: Locate the init.ora file. Password: User tiger as your password. Pathname: Open c:\my_docs\projects URL: Go to http://www.oracle.com User input: Enter 300 Username: Log on as scott
Initial cap Graphics labels (unless the term is a proper noun)
Customer address (but Oracle Payables)
Italic Emphasized words and phrases, titles of books and courses, variables
Do not save changes to the database. For further information, see Oracle7 Server SQL Language Reference Manual. Enter [email protected], where user_id is the name of the user.
Quotation marks
Interface elements with long names that have only initial caps; lesson and chapter titles in cross-references
Select “Include a reusable module component” and click Finish. This subject is covered in Unit II, Lesson 3, “Working with Objects.”
Uppercase SQL column names, commands, functions, schemas, table names
Use the SELECT command to view information stored in the LAST_NAME column of the EMP table.
Arrow Menu paths Select File > Save. Brackets Key names Press [Enter]. Commas Key sequences Press and release keys one at a time:
[Alternate], [F], [D] Plus signs Key combinations Press and hold these keys simultaneously: [Ctrl]+[Alt]+[Del]
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents xi
Typographic Conventions in Code Convention Element Example Caps and lowercase
Oracle Forms triggers
When-Validate-Item
Lowercase Column names, table names
SELECT last_name FROM s_emp;
Passwords DROP USER scott IDENTIFIED BY tiger;
PL/SQL objects OG_ACTIVATE_LAYER (OG_GET_LAYER (‘prod_pie_layer’))
Lowercase italic
Syntax variables CREATE ROLE role
Uppercase SQL commands and functions
SELECT userid FROM emp;
Typographic Conventions in Navigation Paths
This course uses simplified navigation paths, such as the following example, to direct you through Oracle Applications.
(N) Invoice > Entry > Invoice Batches Summary (M) Query > Find (B) Approve
This simplified path translates to the following:
1. (N) From the Navigator window, select Invoice then Entry then Invoice Batches Summary.
2. (M) From the menu, select Query then Find.
3. (B) Click the Approve button.
Notations:
(N) = Navigator
(M) = Menu
(T) = Tab
(B) = Button
(I) = Icon
(H) = Hyperlink
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
11i Purchasing for End Users Table of Contents xii
Typographical Conventions in Help System Paths
This course uses a “navigation path” convention to represent actions you perform to find pertinent information in the Oracle Applications Help System.
The following help navigation path, for example—
(Help) General Ledger > Journals > Enter Journals
—represents the following sequence of actions:
1. In the navigation frame of the help system window, expand the General Ledger entry.
2. Under the General Ledger entry, expand Journals.
3. Under Journals, select Enter Journals.
4. Review the Enter Journals topic that appears in the document frame of the help system window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 1
Purchase Orders Chapter 7
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 2
Purchase Orders
Purchase Orders
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 3
Procure to Pay Lifecycle
Requisitions
Purchase Orders
Receiving
Reporting
Invoice/ Payment
Supplier Performance
Supplier management
RFQs/ Quotations
CatalogContent
Management
Sourcing
Ordering
Analysis
Procure to Pay Lifecycle
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 4
Objectives
Objectives
After completing this module, you should be able to do the following:• Create standard, blanket and contract
purchase documents• Create blanket purchase agreement releases• Maintain purchase orders• Identify key reports• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 5
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 6
Purchase Order Types
Purchase Order Types
Header
Line
Shipment
Distribution
Contract Agreement
HeaderHeader
Line
Header
Line
Shipment
Distribution
Blanket Agreement
Planned Purchase
Order
Standard Purchase
Order
Shipment
Distribution
Blanket Release
Header
Line
Shipment
Distribution
Standard PO
Scheduled Release
Purchase Order Types
Standard Purchase Order A one-time commitment to purchase goods or services. You create standard purchase orders when you know the details of the goods or services, estimated costs, quantities, delivery schedules, and accounting distributions. Planned Purchase Order A long-term purchase agreement committing you to buy goods or services. Planned purchase orders include tentative delivery schedules and accounting distributions. Create planned releases to authorize suppliers to ship. Blanket Purchase Agreement A long-term agreement allowing for stable pricing over the life of the agreement, while also allowing flexible order quantity commitments and delivery schedules. Pricing on blanket purchase agreements can include break pricing. You typically use this agreement when negotiating volume discounts on individual items. Create blanket releases to authorize suppliers to ship. Contract Purchase Agreement
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 7
A master terms and conditions document. Typically use contract purchase agreements when negotiating pricing on a volume of business to manage terms and conditions. Suppliers are authorized to ship through standard purchase order lines referencing the contract. Contracts can be coupled with a catalog quotation to reference pricing on a per item basis.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 8
Purchase Orders
Inventory WIP MRP
Demand
RequisitionRequisition
pool
Order Mgmt
Import
Internalsales order
Manuallycreate
Approval
Order Mgmt
PO
Other Systems
Purchase Orders
Purchase Orders
Demand for Goods or Services Import requisitions from created from demand generated in Materials Requirements Planning (MRP), Inventory, Work-in-Process (WIP), Order Management or other non-Oracle systems. Demand can also be generated manually through detail entry, with the assistance of requisition templates, or through the iProcurement module. Sourcing Goods or services can be sourced from external suppliers through the creation of purchase orders or from within the organization through the creation of internal sales orders.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 9
Purchase Order Components and Record Structure
Purchase Order Components and Record Structure
Header
Lines
Shipments
Distributions
1 32
1 11
111
2
2 1
Purchase Order Components and Record Structure
Header Each purchase order has a header that provides the supplier’s name/number and address (through sites), basic ship-to and bill-to addresses (through locations) and a status. Lines Goods or services ordered are listed on the Lines region, including quantities, price, need-by date, notes to supplier and price reference information. You can order system items or one-time items (a category and description). Even companies who are not inventory focused can benefit from defining system items to reduce data entry requirements for their staff. Shipments Use the Shipments window to specify inventory organizations, ship-to locations and the date you want your supplier to deliver the items on the purchase order line. A purchase order line with a quantity of six items can, for example, have two scheduled shipments on separate dates. Distributions Use the purchase order Distributions window to enter distribution information for purchase order shipments or to view distributions that Purchasing has automatically created for you.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 10
You can enter multiple distributions per shipment line. You can also view the on-line requisitions included on the purchase order or enter information about paper requisitions in this window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 11
Overview of AutoCreated Purchase Orders
Overview of AutoCreated Purchase Orders
Requisitionlinepool
Query available requisition lines
POChoose lines
fromquery results
Automaticmode
Manualmode
PO
Overview of AutoCreated Purchase Orders
Using the AutoCreate form is a common method to produce purchase documents from requisitions. Other methods include:
• Purchasing Document Open Interface • PO Create Documents workflow • Copy Document
Requisition Line Pool You can use the AutoCreate window to query requisition lines with a status of Approved to place on purchase orders. You can query lines for different requisitions, different items, different suggested suppliers, different departments, etc. You may be able to lower unit prices by combining multiple requisition lines and taking advantage of volume discount purchases. Automatic Mode Versus Manual Mode After buyers query and select requisition lines, they can choose to use either Automatic creation mode or Manual creation mode to place requisition lines on purchase documents. You generally select manual creation mode only when you need to specify exact ordering and grouping of requisition lines on a purchase document.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 12
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional
implementation considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 13
Overview of Standard Purchase Orders
Overview of Standard Purchase Orders
Buyer Supplier
Purchase Order
- binding agreement -
Overview of Standard Purchase Orders
Definition You generally create standard purchase orders for one-time purchases of various items when you know the details of the goods or services you require, including costs, quantities, delivery schedules and accounting distributions. Each standard purchase order line can have multiple shipments, and you can distribute the quantity of each shipment across multiple charge accounts, projects, tasks and requestors. Binding agreement The original copy of the purchase order you send to your supplier is a legal offer to buy. A binding purchase contract does not exist until the supplier accepts your offer either by performing the contract (by shipping goods) or formally accepting the offer by contacting you verbally or in writing. You can record acceptances on behalf of your suppliers or they can do it using iSupplier Portal. The Send Notifications for Purchasing Documents process will send you a notification if a required acceptance is not recorded by the required date.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 14
Simplify the Entry of Purchase Orders: Preferences
Simplify the Entry of Purchase Orders: Preferences
PO Documents
Default Value Hierarchy
Preferences
Simplify the Entry of Purchase Orders - Preferences
Definition Use the Preferences window to enter values that will default to all purchase order headers, lines, shipments and distributions that you enter. By using preferences, you have essentially gained an additional level of defaults in the Default Value Hierarchy. Recall that the Purchasing Default Value Hierarchy includes the following: Financials Options, Purchasing/Receiving Options, Supplier, Supplier Site, Item and PO Documents. Benefits Although setting preferences is optional, you will want to selectively enter preferences for data that would be repetitively entered on multiple lines, shipments or distributions. Preferences, therefore, reduce the amount of data entry required to complete purchase orders. For example, if you’re creating a purchase order for four items, all of which are needed by the same date, specify a Need-By date in the Preferences window that will default to all four lines. If, however, all four items were needed by a different date, it wouldn’t save any time to use the Preferences window to specify a Need-By date. How Long are Preferences Effective?
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 15
Session preferences must be set each time you log into the applications or even change responsibilities. While in a session, however, preferences remain in effect unless you explicitly clear or change them. Apply Preferences to Save Once the desired preferences have been set, you must click the Apply button to save them. If you simply close the Preferences window, either no preferences will be set or previously set preferences will remain in effect.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 16
Standard Purchase Order Elements
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Elements
Standard purchase orderscontain all four elements ofa purchasing document.
All purchase order typesrepresent some combinationof the basic elements of thestandard purchase order.
Standard Purchase Order Elements
Purchasing Responsibility (N) Purchase Orders > Purchase Orders The Standard Purchase Order is complete and allows a supplier to locate and deliver the goods or services ordered. All purchase order types represent some combination of the basic elements of the standard purchase order.
• Header - Contains the purchase order number, the supplier’s name and address, basic ship-to and bill-to addresses, and the status.
• Line - Details of the goods or services ordered, including name, quantity and price. • Shipment - Details of when and where to deliver items. • Distribution - Details of charge accounts and requisition references.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 17
Structure of a Simple Standard Purchase Order
HEADER
LINE 1
SHIPMENT 1
DISTRIBUTION 1
LINE 2
SHIPMENT 1
DISTRIBUTION 1
Structure of a Simple Standard Purchase Order
Structure of a Simple Standard Purchase Order
The structure displayed above shows a purchase order with two items being ordered (Line 1 and Line 2). Each item is expected to be shipped on the same day to a single address. Furthermore, each item is charged to a single charge account.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 18
Structure of a More Complex Standard Purchase Order
Structure of a More Complex Standard Purchase Order
DISTRIBUTION 2
LINE 1
SHIPMENT 1
DISTRIBUTION 1
LINE 2
SHIPMENT 1
DISTRIBUTION 1
SHIPMENT 2
DISTRIBUTION 1
HEADER
Structure of a More Complex Standard Purchase Order
The structure displayed above shows a purchase order with two items being ordered (line 1 and line 2). Line 1, however, has a single shipment with multiple distributions while line 2 has multiple shipments, each with a single distribution. Notice that you cannot equate the number associated with a shipment line or distribution line with an item line. For example, distribution 2 does not belong to shipment 2 or line 2. Distribution 2 actually belongs to shipment 1 which belongs to item line 1.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 19
Entering Standard Purchase Order Header Information
Currency Terms
Line
PO Number PO Type Created Date
Supplier Name Supplier Site Supplier Contact
Ship To Bill To Currency
Buyer Status Total
Description
Purchase Orders
Entering Standard Purchase Order Header Information
Entering Standard Purchase Order Header Information
PO Number The system will generate a PO number when the document is saved, if PO automatic number generation is enabled. If manual numbering is enabled, you must enter a unique PO number. PO Type Select Standard Purchase Order for this field. Creation Date This will be the date that the document was initially saved. It may be the same day, the next week or the next month before the purchase order is submitted for approval. Supplier, Site and Contact The list of values on the Supplier field contains active suppliers. The list of values on the site field contains active sites that are designated as purchasing sites on the General tabbed region for the site. If you cannot find the desired supplier or site, you may need to request that it be defined. Choose a contact using the list of values if contacts are defined and no contact defaults. Ship-to and Bill-to Locations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 20
Ship-to and Bill-to locations default based on the supplier and site you select. You can override the values that default. Currency The functional currency defaults. Use the Currency button to change the functional currency if you are using multiple currencies. Buyer The defaulted buyer is the employee name associated with the user name of the person creating the purchase order. If the Enforce Buyer Name option in the Purchasing Options window is set to Yes, you will not be able to override the default. Status The status of a newly created purchase order is Incomplete. The status will be updated by the system based on actions taken by buyers or approvers. Total The total of the purchase order is displayed based on the extended line totals. Description You can enter comments in the 240 character description field. Although the description does not print on the printed purchase order, suppliers can use it if they have access to the system with iSupplier Portal.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 21
Standard Purchase Orders Terms and Conditions
Standard Purchase Orders Terms and Conditions
Special Conditions
• Confirming Order
• Firm
• Acceptance Required
Notes
• Supplier
• Receiver
Terms
• Payment
• Freight
• Carrier
• FOB
• Pay On
Standard Purchase Orders - Terms and Conditions
Payment terms Specify payment terms indicate when you are expected to make payment for the goods or services received. The terms may include an amount due, as well as a discount amount. Commonly used payment terms are Net 30 or 2/10, Net/30. You can create additional payment terms as necessary. Freight terms Specify freight terms to indicate who is responsible for the direct charges related to transporting shipped goods. Commonly used freight terms include Due (indicating you pay the freight charges) or Prepaid (indicating that the supplier will pay for the freight charges). Carrier Specify the name of the freight carrier responsible for physical transportation of the goods. FOB, or Free-On-Board Specify FOB to indicate the point at which ownership of the goods (and therefore costs of loss or damage) transfers from the supplier to you. Commonly used FOB terms include Origin (indicating that ownership transfers at the point when the supplier delivers the goods to the
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 22
carrier) and Destination (indicating that ownership transfers at the point when the carrier delivers the goods to you). Pay On Provides a default value of Receipt if the selected supplier site has been enabled for the Pay on Receipt functionality. If Receipt is selected, an invoice will be automatically created for this purchase order when receipt of the goods has been acknowledged and you run the Pay on Receipt AutoInvoice process. If you do not want an invoice to be created, you can clear the value that defaults into the field. Special Conditions
• Confirming Order - Indicates that you’ve already communicated the order to the supplier and this purchase order is simply providing written confirmation. When you select the Confirming Order option, the words “This is a confirming order. Do not duplicate.” will be included on the printed purchase order.
• Firm - This is a setting used with MRP to indicate to that module that it can neither change the details nor suggest changes to the details of the purchase order based on changed demands that have occurred since the order was originally created.
• Acceptance Required - Indicates whether acknowledgement of receipt of the purchase order is requested from the supplier. When the box is checked, the buyer can also provide the date by which that acknowledgement is requested.
Notes: • Supplier Note - This field can be used to enter up to 240 characters which will print on
the purchase order sent to the supplier. • Receiver Note - This field also allows up to 240 characters to be entered, but will not be
printed on the purchase order. Notes to receiver are can be viewed by users entering actual receipt transactions.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 23
Entering Standard Purchase Order Lines Tabbed Regions
The line portion of the standard purchase order is comprised of four tabbed regions:• Items• Price Reference• Reference Documents• More
Entering Standard Purchase Order Lines Tabbed Regions
Entering Standard Purchase Order Lines - Tabbed Regions
Enter initial information regarding the goods or services being ordered in the tabbed regions for the line. If sufficient valid default information is available, Purchasing creates shipments and distributions for each line. Items Tabbed Region Enter basic information such as the items, descriptions, quantities, and dates needed. Price Reference Tabbed Region Pricing information will default in this tabbed region from the item definition. Reference Documents Tabbed Region Use the Reference Documents tabbed region to reference contracts or catalog quotations when purchasing items from established agreements. If you have associated a catalog quotation with an approved supplier list or are have set the PO: Automatic Document Sourcing profile option to Yes, and have valid quotations in the system, quotation information will default. More Tabbed Region Enter information regarding hazardous materials and supplier notes in this tabbed region.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 24
Standard Purchase Order Line Items Tabbed Region
ItemsNum, Type, Item, Revision,Category, Description,UOM, Quantity, Price,Promised, Need-By, SupplierItem, ChargeAccount, Amount
Price ReferenceReference DocumentsMore
Standard Purchase Order Line Items Tabbed Region
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Line - Items Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Type The value that defaults to new lines is the value set as the default in the Purchasing Options window. If you enter a system item, the type set on the item’s definition will override the original defaulting value if necessary. Item/Revision Select from the list of values if ordering an item that’s already been defined in the item master. Once selected, the category, description, UOM and price will populate based on the item definition. If the system item has been placed under revision control, you must also select the appropriate revision number being ordered. If ordering items that have not been defined in the item master, skip the Item/Revision fields and manually enter a category, description, UOM and price. Category
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 25
A required field populated either from the predefined item’s definition or manually. You cannot change the purchasing category if you choose a system item. Description For system items, you can update the description only if that functionality has been enabled for item attribute controlling descriptions. The full item description for the current line is displayed beneath the Lines tabbed region. You must provide a description for one-time items. UOM (Unit of Measure) The UOM qualifies the quantity that will next be entered. Suppliers need to know whether you’re ordering 3 each, 3 boxes or 3 pounds. The value initially populates with the default set up for the line type selected, and is then overridden by the value set on the item definition. Quantity Enter the total quantity to be ordered. Promise/Need-By Dates Enter the date that you have requested delivery from the supplier in the Need-By date field. If you have communicated with the supplier who has committed to a delivery date, enter it in the Promise field instead. It’s important that only supplier-provided dates be entered in the Promise field, and non supplier-provided dates be entered only in the Need-By date field. These dates will be used to measure supplier performance related to delivery issues. Supplier Item If available, you can enter the number or name that the item has been assigned on the supplier’s item list. For example, our item master may have assigned a number/name in Oracle of “Pencils, Lead No. 2”, but the supplier’s number for the item in their system may be “12-7732”. Charge Account If an item is distributed to a single charge account, the account number is displayed for viewing purposes only, it cannot be updated directly in this window. If an item is being distributed to multiple charge accounts, the word “Multiple” will be displayed, requiring you to drill down to either the Shipment or Distribution level of the purchase order to see charge account combinations. Amount This is a display field which holds the results of the quantity ordered multiplied by the price.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 26
Standard Purchase Order Line Price Reference Tabbed Region
Standard Purchase Order Line Price Reference Tabbed Region
ItemsPrice Reference
Num, List Price,Market Price, Price Type
Reference DocumentsMore
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Line - Price Reference Tabbed Region
Num The system will automatically generate a unique line number for each line you create. List Price/Market Price When ordering predefined items, the list price and market price will default from the item’s definition if specified. You can either accept the defaults or make changes. The list price is the price paid with no discounts, while the market price is what the item is currently selling for in the market. Price Type This is a user-defined list of values developed through lookup codes. Commonly used price types include fixed, variable and cost plus fee.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 27
Standard Purchase Order Line Reference Documents Tabbed Region
Standard Purchase Order Line Reference Documents Tabbed Region
ItemsPrice ReferenceReference Documents
Num, Contract, Quotation,Line, Quotation Type,Supplier Quotation
More
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Line - Reference Documents Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Contract You cannot enter a contract number until you have entered a supplier in the header, and the contract must be for this supplier. The contract you choose must be effective; that is, the current date has to be within the effective date and the expiration date of the contract. If you reference a contract purchase agreement on a standard purchase order line, Purchasing adds the total amount of the purchase order line to the released amount on the contract purchase agreement. Purchasing lists only those contracts with the same supplier as the one on your standard purchase order. Quotation/Line/Quotation Type/Supplier Quotation These fields are display only and will be populated if you selected a quotation from the Supplier Item Catalog. These fields will also be populated if you have created sourcing rules and either associated a catalog with an approved supplier list (PO: Automatic Document
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 28
Sourcing = No) or have active, unexpired quotations in the system (PO: Automatic Document Sourcing = Yes). This catalog will be discussed later in this module.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 29
Standard Purchase Order Line More Tabbed Region
Standard Purchase Order Line More Tabbed Region
ItemsPrice ReferenceReference DocumentsMore
Num, Note to Supplier,UN Number, Hazard,Capital Expense
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Line - More Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Note to Supplier Enter up to 240 characters of special information that needs to be communicated to the supplier. Notes at this level are specific to the particular line entered as opposed to notes to suppliers entered at the header level that pertain to all lines on the purchase order. If 240 characters are not sufficient, use the Attachments feature to add a text attachment that will print on the purchase order. UN Number/Hazard If applicable, enter the UN identification number for the item. Any default, if present, comes from the item definition. If you’ve entered a UN Number, the corresponding hazard class is displayed. Otherwise, you can enter a hazard class for this item. Capital Expense Indicates that the purchase is a capital expenditure that will be later integrated with Assets or some other asset system.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 30
Entering Standard Purchase Order Shipments - Tabbed Regions
Entering Standard Purchase Order Shipments - Tabbed Regions
• The shipment portion of the standard purchase order is actually comprised of three tabbed regions:– Shipments– More– Status
• Must be at least one shipment for each line• Can be many shipments for each line
Entering Standard Purchase Order Shipments - Tabbed Regions
The Shipment section of the purchase order contains detail regarding quantities of items to be shipped by specified ship dates and to specified ship locations. When you save your work, Purchasing creates distributions if sufficient, valid, default information is available and if there are no existing distributions.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 31
Standard Purchase Order Shipment Shipments Tabbed Region
Shipments More Status
Num
Org/Ship-To
UOM/Quantity
Need-By
Promised Date/ Original Promise
Charge Account
Amount
Standard Purchase Order Shipment Shipments Tabbed Region
Standard Purchase Order Shipment - Shipments Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Org If you entered a system item, you can pick only inventory organizations in which the item is defined. If you entered a revision number on the purchase order line, then the item revision must also be defined in the inventory organization. If you did not enter an item, then you can select from a list of values of inventory organizations. Ship-To You can pick any location that is not tied to a specific inventory organization or any location whose associated organization matches the organization in the previous field. UOM/Quantity The first shipment line for any item will have the full quantity and UOM defaulting from the Items tabbed region previously discussed. If you decrease this quantity, Purchasing will automatically default the remaining quantity ordered that has not yet been placed on the
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 32
shipment line on the next shipment line you create. The total quantity of scheduled shipments for a particular line must sum to the quantity in the Items tabbed region. Need-By Enter a Need-By date. This field is optional unless the item is a planned item. This field is used in several reports that relate to analyzing supplier performance. Promised Date/Original Promise Enter the date that the supplier promised delivery of the items. If you are subsequently contacted by the Supplier with a different date, you will simply overwrite the previous promise date with the new promise date. When this is done, Purchasing shifts the original promised date into the Original Promise field so that supplier performance can be measured against these dates. If the supplier again extends the delivery date promised, you can again overwrite the promise date with the new promise date. The system will continue to maintain the promise date initially provided in the original promise date field. Supplier performance can then be measured for the time between the original promise date and the current promise date. Suppliers can themselves update their promised delivery date through the iSupplier Portal. Charge Account If a shipment is purchased from a single charge account, the account number is displayed for viewing purposes only, it cannot be updated directly in this window. If an item is being purchased from multiple charge accounts, the word “Multiple” will be displayed, requiring you to drill down to the Distribution level of the purchase order to see account numbers. Amount This is a display field which holds the results of the quantity ordered multiplied by the price.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 33
Standard Purchase Order Shipment More Tabbed Region
Standard Purchase Order Shipment More Tabbed Region
Num
Receipt Close Tolerance (%)
Invoice Close Tolerance (%)
Invoice Matching
Accrue on Receipt
Firm
Shipments More Status
Standard Purchase Order Shipment - More Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Receipt Close Tolerance (%) Purchasing automatically closes a shipment for receiving if it is within the receipt closing tolerance at the receiving close point. Set the receiving close point in the Purchasing Options window. Invoice Close Tolerance (%) Purchasing automatically closes a shipment for invoicing if it is within the invoice closing tolerance at billing, when Payables matches invoices to purchase orders or receipts. Invoice Matching Select which information will be compared to the invoice when matching. All must match within tolerance for the selected option.
• Two-Way: Purchase order and invoice quantities as well as purchase order and invoice unit prices must match within tolerance before the corresponding invoice can be paid.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 34
The receipt close tolerance can be set to 0% to allow the system to automatically close fully received lines.
• Three-Way: Purchase order, receipt, and invoice quantities as well as purchase order and invoice unit process must match within tolerance before the corresponding invoice can be paid.
• Four-Way: Purchase order, receipt, accepted, and invoice quantities as well as purchase order and invoice unit prices must match within tolerance before the corresponding invoice can be paid.
Accrue on Receipt Check box to indicate that the items on this purchase order line should be accrued on receipt. Inventory destined items always accrue upon receipt. For expense items, if the Accrue Expense Items flag in the Purchasing Options window is set to Period End, the items cannot accrue upon receipt, and you cannot change the shipment level default. If the Accrue Expense Items flag is set to At Receipt, the default is to accrue upon receipt, but you can change it to Period End. Firm A setting used with MRP to indicate to that module that it cannot change or suggest changes to the details of this purchase order based on changed demand that has occurred since the order was originally created.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 35
Standard Purchase Order Shipment Status Tabbed Region
Shipments More Status
Num
Status
Ordered
Received
Canceled
Billed
Standard Purchase Order Shipment Status Tabbed Region
Standard Purchase Order Shipment - Status Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Status This status will be updated by the system based on actions taken by buyers, receivers or accounts payable staff. Ordered/Received/Canceled/Billed Quantities will be displayed to indicate the quantities that have been ordered, received, cancelled and billed. Quantities are updated through actions taken by buyers, receivers and accounts payables staff.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 36
Standard Purchase Order Shipment Receiving Controls Button
Standard Purchase Order Shipment Receiving Controls Button
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Receiving Controls
Standard Purchase Order Shipment - Receiving Controls Button
Use the Receiving Controls window to enter receiving control information for purchase orders and releases. Note that controls you enter here apply to specific purchase orders/releases and override the receiving controls you enter in the Receiving Options window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 37
Entering Standard Purchase Order Distributions - Tabbed Regions
Entering Standard Purchase Order Distributions - Tabbed Regions
• The distribution portion of the standard purchase order is comprised of three tabbed regions:– Destination– More– Project
• Details required internally to generate accounting for the shipment.
• Must be at least one distribution for each shipment, but can be many distributions for each shipment.
Entering Standard Purchase Order Distributions - Tabbed Regions
Use the purchase order Distributions window to enter distribution information for purchase order shipments and to view distributions that Purchasing has automatically created for you. You can enter multiple distributions per shipment line. You can also view on-line requisitions included on the purchase order enter paper requisition information in this window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 38
Standard Purchase Order Distribution Destination Tabbed Region
Standard Purchase Order Distribution Destination Tabbed Region
Num
Type
Requestor
Deliver-To/ Subinventory
Quantity
Charge Account
Accrual/Variance Accounts
Destination More Project
Standard Purchase Order Distribution - Destination Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Type The destination type determines the final destination of the purchased items. Choose one of the following options:
• Expense - The goods are delivered to the requestor at an expense location. The destination subinventory is not applicable.
• Inventory - The goods are received into inventory upon delivery. You can choose this option only if the item is stock enabled in the ship-to organization.
• Shop Floor - The goods are delivered to an outside processing operation defined by Work in Process. You can choose this option only for outside processing items.
Requestor Enter the name of the person requesting the goods or services. If the purchase order was automatically created from approved requisition lines, this field would be populated with the name of the requestor on the requisition.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 39
Deliver-To/Subinventory Enter the Deliver To location for this distribution. If the destination type is Inventory, you can also enter the Subinventory. Quantity Enter the Quantity of the purchase order shipment that you want to charge to the Accounting Flexfield. The default value comes from the quantity you enter in the Shipments window. If you decrease the default quantity, Purchasing automatically defaults on the next distribution line the remaining quantity you have not yet assigned to a distribution line. Charge Account Enter the Charge Account. When you save your changes in this window, Purchasing uses the Account Generator to automatically create the following three accounts for each distribution:
• Charge - The account to charge for the cost of this item • Accrual - The AP accrual account • Variance - The invoice price variance account
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 40
Standard Purchase Order Distribution More Tabbed Region
Standard Purchase Order Distribution More Tabbed Region
Num
Requisition Number/Line
Online
Destination More Project
Standard Purchase Order Distribution - More Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Requisition Number/Line and Online The Online check box indicates whether this distribution is part of an on-line requisition. If so, Purchasing checks the box and displays the on-line requisition number and line number, you cannot update this field. If this distribution does not come from an on-line requisition, enter the paper requisition number in this field. The default is the paper requisition number from the Purchase Order Preferences window, if entered.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 41
Standard Purchase Order Distribution Project Tabbed Region
Standard Purchase Order Distribution Project Tabbed Region
Num
Project
Task
Expenditure Type
Expenditure Org
Destination More Project
Standard Purchase Order Distribution - Project Tabbed Region
Num The system will automatically generate a unique line number for each line you create. Project/Task/Expenditure Type/Expenditure Org If this purchase is being charged to a Project, enter the appropriate project, task, expenditure type, expenditure org and expenditure item date.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 42
Approve Standard Purchase Order
Approve Standard Purchase Order
OK
Submit for Approval
Forward
Approval is the last step in creating a Purchase Order.
Approve Document
X
Approve Standard Purchase Order
Integration with Workflow In Purchasing, all approvals are handled by Workflow. The Procurement Workflows are predefined workflows embedded in Purchasing. Workflow uses the approval controls and hierarchies you define during setup as the default approval processes. Status Your purchase order document will have the status Incomplete until you submit the document for approval. If you do not have sufficient approval authority, the status will be set to In Process and Workflow will forward the document to an appropriate approver. Once approval is obtained, the status is changed to Approved. Communicating Approved Purchase Orders to Suppliers Depending on how the supplier’s record has been defined, purchase orders may be sent by printed document, facsimile, email, XML or through electronic data interchange (EDI). The Approve Document window defaults the transmission method defined on the supplier, but you can update these defaults for a particular purchase order.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 43
Guided Demonstration - Create a Standard Purchase Order (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Supply Base > Suppliers
Enter an attachment on a supplier then create a standard purchase order.
Instructor Note: Ensure the PO: Automatic Document Sourcing profile option is set to No.
Add a Text Attachment to your Supplier
1. Navigate to the Suppliers window
2. (N) Supply Base > Suppliers
3. Query XXIBM Corporation
4. (I) Attachments
5. Category = To Supplier
6. Description = Misc T&C
7. Data Type = Long Text
8. Note = You decide
9. Save
Create a Standard Purchase Order
10. Open the Purchase Orders window:
11. (N) Purchase Order > Purchase Orders
12. Type = Standard Purchase Order
13. Supplier = XXIBM Corporation
14. Ship-to = M1-Seattle
15. Bill-to = V1-New York
16. Description = XXComputer Hardware
17. (T) Items
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 44
18. Enter the items according to the following table:
Num Item Quantity Price Promised Date
1 XXSoftware 10 450 Blank
2 XXMonitor 10 250 Blank
19. Save
Note: Need-by and Promised Date are only required for planned items. However, they are used in supplier performance reports.
Enter Terms and Conditions
20. Navigate to the Terms and Conditions window:
21. (B) Terms
22. Payment = Immediate
23. Select the Confirming Order check box.
24. Acceptance Required = Checked
25. Acceptance is required by tomorrow.
Note: The Send Notifications for Purchasing Documents concurrent request will send a notification to you if acceptance has not been recorded prior to the date you specify in this field. This request MUST be SCHEDULED to run in order for notifications to be sent!
26. Pay On = Blank
27. Add a note to the supplier. This note will be printed on the header of the purchase order.
28. Save
29. Close the Terms and Conditions window to return to the Purchase Orders window.
Enter Shipments
30. Place cursor in Item field for XXSoftware item.
31. (B) Shipments
32. Enter the following shipments for the XXExpensed item.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 45
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
33. Save
34. (T) More
35. Enter information according to the following table:
Num Receipt Close
Tolerance (%) Invoice Close Tolerance (%)
Match Approval Level
Invoice Match Option
1 0 5 2-Way PO
2 0 5 2-Way PO
3 0 5 2-Way PO
36. Save
Note: This is will be a 2-Way match and I don’t anticipate performing any formal receiving. Setting the Receipt Close Tolerance to 0% is a good idea in this case. Once the invoice is matched to this purchase order, the status of the each shipment will automatically change to closed. Once all shipments are received, the status of the line will change to closed. As a result, no buyer intervention will be necessary to manually change the status of the line.
37. Close the Shipments window to return to the Purchase Orders window.
38. Place cursor in Item field for the XXMonitor item.
39. (B) Shipments
40. Enter the following shipments for the XXMonitor item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 46
41. Save
42. (T) More
43. Enter information according to the following table:
Num Receipt Close
Tolerance (%) Invoice Close Tolerance (%)
Match Approval Level
Invoice Match Option
1 10 5 3-Way PO
2 10 5 3-Way PO
3 10 5 3-Way PO
44. Save
45. Close the Shipments window to return to the Purchase Orders window.
46. Record your purchase order number.
Complete the Internal Distributions for the Expensed item
47. Click in the Item field for the XXSoftware item.
48. (B) Shipments
49. (B) Distributions
50. Complete the internal distribution according to the following table:
Num Type Requestor Quantity Charge
1 Expense Your name 4 01-520-7530-0000-000
51. Save
52. Close the Distributions window.
53. Repeat the steps above until EACH shipment has ONE AND ONLY ONE completed internal distribution.
54. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 47
Complete the Internal Distributions for the Inventory item
55. Place cursor in the Item field for the XXMonitor item.
56. (B) Shipments
57. (B) Distributions
58. Complete the internal distribution according to the following table:
Num Type Requestor Subinventory Quantity
1 Inventory Smith, Mr. Jonathon Stores 4
Note: The type of the item is Inventory. For Inventory items, the charge account cannot be changed. Account generator builds it based on the accounts in the inventory organization!
59. Save
60. Close the Distributions window.
61. Repeat the steps above until EACH shipment has ONE AND ONLY ONE completed internal distribution.
62. Save
63. Close the Distributions and Shipments windows.
Approve the Purchase Order
64. Record your purchase order number.
65. (B) Approve
66. Submit for Approval = Checked
67. Uncheck all other options
68. (B) OK in the Approve Document window.
69. (B) OK to close the note window.
Note: The standard messages on the notes fields may be easily changed using the Application Developer responsibility.
Place your Purchase Order on the Navigator
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 48
70. Place your Purchase Order on the Navigator
71. (M) File > Place on Navigator
72. Note that your attachment has been automatically copied from your supplier to the purchase order header!
Verify Distribution Information
73. Query up your PO
74. Verify that each distribution for XXSoftware has requestor information recorded.
75. Verify that each distribution for XXMonitor has requestor and subinventory information is recorded
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 49
Practice - Create a Standard Purchase Order
Overview
In this practice, you will do the following:
• Create a standard purchase order for two defined items – one expense item and one inventory item.
• Create multiple shipment lines and multiple distribution lines for one or both of the items.
• Run select reports relevant to standard purchase orders.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
Tasks
Log on to the System
Create Standard Purchase Order header
Set Purchase Order preferences
Enter an expense item that you need to order
Enter shipments
Enter distributions for the first shipment
Enter distributions for the second shipment
Enter an inventory item that you need to order
Enter shipments
Enter distributions for the first shipment
Enter distributions for the second shipment
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 50
Submit your purchase order for approval
Run the Printed Purchase Orders Report (Landscape)
Run the Purchasing Activity Register
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 51
Solution - Create a Standard Purchase Order
Tasks
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create Standard Purchase Order header
1. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders − Type = Standard Purchase Order − Supplier = Advanced Network Devices − Site = Santa Clara − Ship-to = M1-Seattle − Bill-to = V1-New York City
2. Navigate to the Terms and Conditions window
• (B) Terms − Confirming Order = Check box − Acceptance Required = Check box − By = One week from today − Supplier Note = Add a note to your supplier
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 52
3. Close Terms and Conditions window
4. Save
Set Purchase Order preferences
5. Navigate to the Purchase Order Preferences window
• (M) Tools > Preferences − Requestor = Adams, Mr. Brian
6. Apply
7. Close the Purchase Order Preferences window
Enter an expense item that you need to order
8. (T) Items − Num = 1 − Item = f30000
9. (B) OK to Blanket purchase order warning message − Quantity = 10
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 53
Enter shipments
10. Navigate to the Shipments window
• (B) Shipments
Enter the following shipments for this item:
Num Org Ship-to UOM Quantity Need-By
1 M1 M1-Seattle Each 4 In 1 week
2 M1 M1-Seattle Each 6 In 2 weeks
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 54
11. Save
Enter distributions for the first shipment
12. Place cursor on the first shipment line
13. Navigate to the Distributions window
• (B) Distributions − Num = 1 − Quantity = 2 − Charge Account = Allow to default
14. Add another distribution − Num = 2 − Quantity = 2 (should have defaulted) − Charge Account = Allow to default, then override the department value to 730
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 55
15. Save
Enter distributions for the second shipment
16. Place cursor on the second shipment line
17. Navigate to the Distributions window
• (B) Distributions − Num = 1 − Quantity = 6 − Charge Account = Allow to default
18. Save
Enter an inventory item that you need to order
19. Close the Distributions window and then the Shipments window (returning to the Purchase Orders window
20. (T) Items − Num = 2 − Item = AS72111
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 56
− Quantity = 10 − Price = $1,400
Enter shipments
21. Navigate to the Shipments window
• (B) Shipments
Enter the following shipments for this item:
Num Org Ship-to UOM Quantity Need-By
1 M1 M1-Seattle Each 4 In 1 week
2 M1 M1-Seattle Each 6 In 2 weeks
22. Save
Enter distributions for the first shipment
23. Place cursor on the first shipment line
24. Navigate to the Distributions window
• (B) Distributions − Num = 1 − Subinventory = Stores − Quantity = 4 − Charge Account = Allow to default and try to override. Why can’t you override?
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 57
25. Save
Enter distributions for the second shipment
26. Place cursor on the second shipment line
27. Navigate to the Distributions window
• (B) Distributions − Num = 1 − Subinventory = Stores − Quantity = 6
28. Save
Submit your purchase order for approval
29. Close the Distributions window, then the Shipments window (returning to the Purchase Orders window)
30. Navigate to the Submit for Approval window
• (B) Approve − Submit for Approval = Check box
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 58
− Uncheck all other options
31. (B) OK
32. (B) OK
33. Ensure that the status on the purchase order header is Approved
Run the Printed Purchase Orders Report (Landscape)
34. Navigate to the Submit Request window
• (N) Reports > Run − Name = Printed Purchase Order Report(Landscape) − Print Selection = All − Purchase Order Numbers From = Your standard purchase order number − [Purchase Order Numbers] To = Your standard purchase order number
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 59
35. (B) OK
36. (B) Submit
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 60
37. (B) No
38. Monitor progress and view output when complete
• (M) View > Requests
39. (B) Find
40. Once the request completes, (B) View Output
Run the Purchasing Activity Register
41. Navigate to the Submit Request window
• (N) Reports > Run − Name = Purchasing Activity Register − Creation Dates From and To = Today’s date − Supplier = Advanced Network Devices
42. (B) OK
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 61
43. (B) Submit
44. (B) No
45. Monitor progress and view output when complete
• (M) View > Requests
46. (B) Find
47. Once the request completes, (B) View Output
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 62
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional
implementation considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 63
When to Use a Blanket Purchase Agreement
When to Use a Blanket Purchase Agreement
Header
Lines
Shipment
Distribution
Blanket Release
Blanket Purchase Agreement
Dates of delivery are not known
Details of goods/servicesare known
Accounts and dollars arenot known
Long-term agreement
When to Use a Blanket Purchase Agreement
Blanket purchase agreements and releases allow you to negotiate stable, long-term contracts while maintaining flexible delivery schedules and order quantity commitments. You create blanket purchase agreements when you know the details of the goods or services you plan to buy from a specific supplier, but you do not yet know delivery schedule details. You can use blanket purchase agreements to specify negotiated prices for your items before actually purchasing them. A blanket purchase agreement is a type of purchase order you issue before you request actual delivery of goods or services. You normally create a blanket purchase agreement to document a long-term supplier agreement. A blanket release is an actual order of goods or services you issue against a blanket purchase agreement. The blanket purchase agreement determines the characteristics and the prices of the items. The release can be created manually or automatically.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 64
Blanket Releases
Blanket Releases
Releases can be created:• Manually• Automatically
Demand generated
outside Purchasing
Requisition Create Releases Process
Blanket Release
Manual
Blanket Releases
Once you have an approved blanket agreement you need only create a release to authorize delivery of goods or services. You can create blanket purchase agreement releases using the following methods:
• The Releases window • PO Create Documents workflow • AutoCreate window • The Create Releases process
Manually Created Releases You can manually enter releases against active blanket purchase agreements. You can set up purchasing to warn you if a blanket purchase agreement exists for items that you try to requisition. Because the blanket purchase agreement is in place, you can create a blanket release instead of submitting a requisition. If you choose not to enable to warn if a blanket purchase agreement exists, can submit requisitions and the buyer can create the blanket release. Automatically Created Releases
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 65
Buyers can expedite creation of releases using the AutoCreate window or by submitting the Create Releases program. In addition, the PO Create Documents workflow can be set up to automatically create blanket purchase agreement releases for requisitions that are submitted, regardless of whether their origin is the Requisitions window or iProcurement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 66
Blanket Purchase Agreements Additional Information Entered
Blanket Purchase Agreements Additional Information Entered
Additional information isentered for blanket purchaseagreements in the header, lineand price breaks purchaseorder elements windows.
HEADER
LINE
SHIPMENTPRICE BREAKS
DISTRIBUTION
Standard Purchase Order
Blanket Purchase Agreements - Additional Information Entered
Purchasing Responsibility (N) Purchase Orders > Purchase Orders Focus of discussion - Rather than reiterate the many fields that have already been discussed during the creation of a standard purchase order, this section will highlight the differences between the blanket purchase agreement and the standard purchase order. Your instructor will review the previously discussed fields as needed during the demonstration of creating a blanket purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 67
Blanket Purchase Agreements Additional Information - Header
Blanket Purchase Agreements Additional Information - Header
Header Lines Price Breaks
Amount Agreed
Released
Terms and Conditions
Blanket Purchase Agreements: Additional Information - Header
Amount Agreed When creating a blanket purchase agreement, you can indicate the dollar amount of the agreement. Released The dollar value displayed in this field is the total dollar value of all releases issued against the blanket purchase agreement. Terms and Conditions You can access the Agreement Controls area of the Terms button. The effective start and stop dates for the agreement can be entered. Releases can only be created during these dates when the blanket is effective. Amount Limit You can optionally change the defaulted value for the Amount Limit. Initially this value is equal to the Amount Agreed. You may provide a higher value in the Amount Limit field which will allow the total released amount to exceed the Amount Agreed. If the total amount released exceeds the Amount Limit, the release cannot be approved.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 68
Minimum Release You can also specify a Minimum Release dollar value which will require that the dollar amount for individual releases exceeds the Minimum Release amount set. Often you establish the Minimum Release amount based on your estimated costs of processing individual releases. For example, if the estimated cost of processing releases is $25, then the user may set the Minimum Release amount to $25.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 69
Blanket Purchase Agreements Additional Information - Lines
Blanket Purchase Agreements Additional Information - Lines
Header Lines Price Breaks
Items
Price Reference
Reference Documents
Agreement
Blanket Purchase Agreements: Additional Information - Lines
Items Tabbed Region Notice that the Quantity field has been grayed out. By definition of a blanket purchase agreement, you are uncertain of the quantities that will be needed of each item listed. The price that is entered for each item is for an implied quantity of one. Reduced pricing that may be available when purchasing larger quantities will be entered through the Price Breaks button that will be discussed shortly. Price Reference Tabbed Region The Allow Price Override check box is used for blanket purchase agreements and planned purchase orders only. This check box indicates that the release price can be different from the price on the purchase agreement or purchase order line. If you allow price override, enter the dollar amount of the Price Limit. This is the maximum price per item you allow for the item on this agreement line. If you do not allow a price override, Purchasing displays on the release the shipment price from the purchase agreement and prevents you from updating it. Select Negotiated to indicate that the purchase price is negotiated. If the actual price is greater than or equal to the list price, then the field is unchecked by default. If the actual price is less than
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 70
the list price, then the field is checked as the default. You can accept the default value or change it. Reference Documents Tabbed Region This tabbed region is generally not used on blanket purchase agreements unless the blanket was created by copying a quotation. Copying purchasing documents will be discussed later in this module. Agreement Tabbed Region You can establish controls at the line level if desired. Additional controls such as minimum release amount, quantity agreed and amount agreed can be established for individual purchase agreement lines. Whether or not you have agreed to minimum quantities or amounts, the system will automatically keep track on this tabbed region of the quantities and amounts actually released against the blanket. Internal quantity and amount targets not formally negotiated as agreed to quantities or amounts with the supplier should not be entered in the agreement. Entry of internal targets could be interpreted and enforced as legal binding to the user. The Cumulative Pricing check box will be enabled by default depending on a setup option in the Purchasing Options of the default value hierarchy. The default may be changed depending on the actual pricing negotiated with the supplier.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 71
Blanket Purchase Agreements Additional Information - Price Breaks
Blanket Purchase Agreements Additional Information - Price Breaks
Header Lines Price Breaks
Quantity
Break Price
Discount (%)
Blanket Purchase Agreements: Additional Information - Price Breaks
After entering the Purchase Orders window and choosing a Type of Blanket Purchase Agreement, the button normally titled Shipments changes to Price Breaks. This form adjustment is necessary to support reduced pricing agreements for volume purchases. Quantity This quantity is not an ordered quantity, but simply a quantity that if purchased would result in reduced pricing. The quantity indicated may need to be reached on an individual release (when the Cumulative Pricing check box on the Agreement tabbed region previously discussed is unchecked) or may be able to be reached through an accumulation of releases issued against the blanket purchase agreement line (Cumulative Pricing check box is checked). Break Price You will enter the reduced price that will be paid for each quantity listed. Discount (%) If a Break Price is entered, the Discount (%) field will display the percentage that this price is off the price listed on the Items tabbed region for the purchase of an implied quantity of one.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 72
Notification Controls
Blanket Purchase Agreement
• Amount Agreed $5,000,000
• Effective Dates Jan 1 to Dec 31
Amount Not Released Amount Released Expiration
50% in the 1st six months
$2M in the 1st three months
Three months before expiration
Notification Controls
Notification Controls
Use the Notification Controls window to enter notification controls for planned purchase orders, contract purchase agreements, and blanket purchase agreements. For these documents, you can establish expiration and release control notification conditions and specify the number of days before the condition is met that you want to be notified. When the notification conditions are met, Purchasing sends you an alert, using Alert (or e-mail). Amount Not Released This control notifies you when the total planned amount released to date is less than a preset amount or is less than the Amount Agreed on the blanket purchase agreement header multiplied by a preset percentage. For example, a user can enter an Effective To date for the Amount Not Released notification control of June 30. The user could further indicate a percentage of 50% (which the system will further calculate the dollar amount of $2.5M for this percentage and display it in the Amount field). The user would then be notified if on June 30, the total amount of releases did not exceed $2.5M. Rather than indicating a percentage, the user can provide a dollar amount and the system will calculate the percentage. Additionally, specified percentages may be set based on prior spending trends rather than passage of time as
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 73
appears to be the case in the example provided. You may also wish to establish multiple Amount Not Released notification controls throughout the period of the agreement. Amount Released This control notifies you when the total planned amount released to date is more than a preset amount or is less than the Amount Agreed on the blanket purchase agreement header multiplied by a preset percentage. For example, a user can enter Effective From/To dates for the Amount Released notification control of January 1 to March 31. Assume the user entered $2M as the amount (which the system will further calculate the percentage of 40% by relating the $2M to the $5M Amount Agreed). The user would then be notified if and when between January 1 and March 31, the total amount of releases exceeds the $2M. Similar to the discussion for the Amount Not Released, you may instead specify a percentage, set the amount based on prior spending trends rather than the passage of time, and may also establish multiple Amount Released notification controls throughout the period of the agreement. Expiration This control notifies you that the agreement is approaching expiration. The notification is sent at specified dates prior to the effective end date of the agreement. For example, the Warning Delay could be set at 90 for an agreement with a one year length. The system will then send a notification to the Buyer 90 days prior to the expiration of the one year agreement that the expiration is approaching. You often will set multiple Expiration notification controls to ensure that sufficient progress is being made toward negotiation of a new agreement with this supplier or a new supplier(s). This control is especially effective for items that should never be purchased outside of agreements.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 74
Approve Blanket Purchase Agreement
Approve Blanket Purchase Agreement
OK
Submit for Approval
Forward
Approval is the last step in creating a Blanket Purchase Agreement
Approve Document
X
Approve Blanket Purchase Agreement
Similar to standard purchase orders, blanket purchase agreements need to be approved. Once approved, blanket releases can then be issued against the blanket purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 75
Guided Demonstration - Create a Blanket Purchase Agreement (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Purchase Orders > Purchase Orders
Create a Blanket Purchase Agreement
1. Type = Blanket Purchase Agreement
2. Supplier = XXIBM Corporation
3. Site = NEW YORK
4. Amount Agreed = 10000
5. Description = XXSupplies
Specify Terms and Conditions
6. (B) Terms
7. Effective = Today + 7 days
8. Amount Limit = 11000
9. Save
Note: The Amount Limit is the REAL control of whether or not releases against this blanket may be approved.
10. (T) Items
11. Select items according to the following table:
Num Item Category Description UOM
1 XXSoftware XX.COMPUTER Expensed Item Each
2 XXMonitor XX.COMPUTER Inventory Item Each
Specify Price Breaks
12. (B) Price Breaks
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 76
13. Enter the following price break information FOR EACH item!
Num UOM Quantity Price Org Ship-To Discount%
1 Each 10 Defaults M1 M1 - Seattle 10
2 Each 25 Defaults M1 M1 - Seattle 15
3 Each 50 Defaults M1 M1 - Seattle 20
14. Save
15. Close the Price Breaks window.
Specify Notification Controls
16. Open the Notification Controls window:
17. (M) Tools > Notification Control
18. Condition = Expiration
Note: If the Warning Delay field does not become enabled, double check to make sure you entered effective dates in the Terms and Conditions window!
19. In the From and To fields, set for 30, 60, and 90 days.
Condition Warning Delay From To
Expiration 2 Defaults Defaults
Expiration 4 Defaults Defaults
Expiration 6 Defaults Defaults
20. Save
21. (B) Done
Note: These Notifications are controlled using Oracle Alerts. The alerts must be activated in order for the conditions to be checked and the notifications to be sent.
22. Record your Blanket Purchase Agreement number.
23. (B) Approve
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 77
24. Submit for Approval = Checked
25. Uncheck all other options
26. (B) OK
27. (B) OK in the Note window
Place your Purchase Order on the Navigator
28. Place your Purchase Order on the Navigator
29. (M) File > Place on Navigator
30. Close windows until you are back at the Navigator
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 78
Blanket Purchase Agreement and Blanket Releases
Blanket Purchase Agreement and Blanket Releases
Blanket Purchase Agreement
Release #/$sCumulative Release $s
#101 $ 5,000 $ 5,000
#120 $12,000 $17,000
#208 $ 9,000 $26,000
Blanket Purchase Agreement and Blanket Releases
Once a blanket purchase agreement has been approved, you can begin creating blanket releases against the agreement. Suppliers will be provided the additional information, such as quantities and shipping details, needed to make actual delivery of the items on the agreement. Details regarding releases are covered in the next few pages. Once you have provided complete shipment and distribution detail, the release needs to be approved before it is sent to the supplier. The approval process for releases is the same as the approval process for the blanket purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 79
Blanket Releases Structure - Header
Blanket Releases Structure - Header
Shipment 1
Release Header
Distribution 1 Distribution 2
Blanket # Release # Supplier/Site Buyer Status Total Acceptance Req’d
Blanket Releases Structure - Header
Release Header When creating a new release, you will enter the blanket purchase agreement number. A list of values is available to assist you in selecting the appropriate agreement. Once selected, the next available release number will be assigned and the supplier, site and buyer from the agreement will be displayed. You can override the default as long as the Enforce Buyer Name option is not enabled in the Purchasing Options window. The status will be updated based on actions taken in the system. A total amount for the release will be displayed as items are ordered in the Shipments window. You can further indicate to MRP whether this release is firm or can be changed and whether acceptance is requested of the supplier to acknowledge that they received the release. Receiving Controls Button Use the Receiving Controls window to enter receiving control information for purchase orders and releases. Note that controls you enter here apply to specific purchase orders/releases and override the receiving controls you enter in the Receiving Options window. Agreement Button
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 80
You can access basic information regarding the blanket purchase agreement through the Agreement button. For example, you will see amount agreed, buyer, amount released, status, effective dates and various payment terms from the blanket purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 81
Blanket Releases Structure Shipments and Distributions
Blanket Releases Structure Shipments and Distributions
Tabbed RegionsDestination More Project
Tabbed RegionsShipments More Status Item
Shipment 1
Release Header
Distribution 1 Distribution 2
Blanket Releases Structure - Shipments and Distributions
Shipments Tabbed Region Entry into this tabbed region is exactly like entry of shipments information on the shipments tabbed region of the standard purchase order with one exception. When you enter the Line field, you are simply entering the line number for the item you want to order from the blanket purchase agreement. Unless a user knows what the line number is, you should access the list of values which will provide the item name and description in addition to the line number. Once the line number is selected, the associated item name and description are displayed near the bottom of the window. More, Status and Item Tabbed Region Entry into these tabbed regions is exactly like entry of shipments information on the the same tabbed regions of the standard purchase order. Distributions Window Entry into all tabbed regions of the distributions window is exactly like entry of distributions information on the the same tabbed regions of the standard purchase order.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 82
Guided Demonstration - Create a Blanket Release (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Purchase Orders > Releases
Create and Approve a Release
1. In the PO, Rev field, use the list of values to select your blanket purchase agreement number.
2. (T) Shipments
3. Place cursor in the Line field
4. [Ctrl + L] to invoke the List of Values
5. Note the lines you see are the two lines from your Blanket Purchase Agreement!
6. Select the XXSoftware item.
7. (B) OK
8. Organization = M1
9. Ship-To = M1-Seattle
10. Quantity = 10
11. Promised = Today’s date
12. Save
13. (B) Approve
14. Submit for Approval = Checked
15. Uncheck all other options
16. (B) OK to approve the Release
17. Click OK to close the note window.
18. (B) Agreement
19. Note the total amount released against the blanket purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 83
Practice - Create a Blanket Purchase Agreement and Blanket Release
Overview
In this practice, you will do the following:
• Create a blanket purchase agreement for two items which will establish pricing for the items, although the quantity and delivery dates/locations are not known.
• Create a blanket release against the agreement for your first order of these items.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
Tasks
Log on to the System
Create a blanket purchase agreement
Enter your first item - Paper
Enter price breaks for volume purchases
Enter your second item - Desk
Enter price breaks for volume purchases
Enter notification controls so that you’ll be warned by the system of certain situations that are either expected or might occur with this blanket purchase agreement.
Submit your purchase agreement for approval
Issue a blanket release to place your first order against the agreement
Submit your blanket release for approval
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 84
Increase your quantity ordered to 3 so that the release will be above the minimum release amount
Submit your blanket release for approval
Return to the Blanket Purchase Agreement to view how it was updated as a result of the release
Run the Purchase Order and Releases Detail Report
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 85
Solution - Create a Blanket Purchase Agreement and Blanket Release
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create a blanket purchase agreement
1. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders − Type = Blanket Purchase Agreement − Supplier = Southern Office Supplies − Site = SOS MAIN − Ship-to = M1-Seattle − Bill-to = V1-New York City − Amt Agreed = $20,000
2. Navigate to the Terms and Conditions window
• (B) Terms − Pay On = Blank − Agreement Controls/Effective Dates = Enter dates starting Today and extending for
one year − Amount Limit = $21,000 − Minimum Release = $50
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 86
3. Close Terms and Conditions window
4. Save
Enter your first item - Paper
5. (T) Items − Num = 1 − Item = f20000
Enter price breaks for volume purchases
6. Navigate to the Price Breaks window
• (B) Price Breaks
Enter the following price breaks for this item:
Num Org Ship-to Quantity Break Price
1 M1 M1-Seattle 10 $19.00
2 M1 M1-Seattle 20 $18.00
3 M1 M1-Seattle 30 $17.00
7. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 87
Enter your second item - Desk
8. (T) Items − Num = 1 − Item = f11000 − Price = $1,000.00
Enter price breaks for volume purchases
9. Navigate to the Price Breaks window
• (B) Price Breaks
Enter the following price breaks for this item
Num Org Ship-to Quantity Break Price
1 M1 M1-Seattle 5 $950.00
2 M1 M1-Seattle 10 $900.00
3 M1 M1-Seattle 15 $850.00
10. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 88
Enter notification controls so that you’ll be warned by the system of certain situations that are either expected or might occur with this blanket purchase agreement.
11. Close the Price Breaks window
12. Navigate to the Notification Controls window
• (M) Tools > Notification Control
Enter controls to warn you of upcoming expiration of the agreement 120 days prior and 60 days prior to the effective end date.
Condition Warning Delay From To % Amount
Expiration 120 Defaults Defaults N/A N/A
Expiration 60 Defaults Defaults N/A N/A
Enter controls to warn you if by 6 months into the agreement, you haven’t released at least 50% of the amount agreed.
Condition Warning Delay From To % Amount
Amount Not Released N/A Today Six Months from Today
50 Default
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 89
13. (B) Done
14. (B) OK
Submit your purchase agreement for approval
15. Navigate to the Submit for Approval window
• (B) Approve − Submit for Approval = Check box − Uncheck all other options
16. (B) OK
17. (B) OK
18. Ensure that the status on the purchase order header is Approved and record your blanket number __________
Issue a blanket release to place your first order against the agreement
19. Navigate to the Releases window
• (N) Purchase Orders > Releases − PO, Rev = Your PO number from the blanket agreement
20. (T) Shipments
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 90
− Line = open the list of values and select the f20000-Paper item − Quantity = 2 − Need-By = One week from today
Submit your blanket release for approval
21. Navigate to the Submit for Approval window
• (B) Approve
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 91
22. Why can’t it be approved?
23. (B) OK
Increase your quantity ordered to 3 so that the release will be above the minimum release amount
24. Place your cursor in Quantity field and increase to 3
25. Save
Submit your blanket release for approval
26. Navigate to the Submit for Approval window
• (B) Approve − Submit for Approval = Check box − Uncheck all other options
27. (B) OK
28. (B) OK
Return to the Blanket Purchase Agreement to view how it was updated as a result of the release
29. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders
30. Using either find or query functionality, locate your blanket purchase agreement
31. Notice the value in the Released field is $60 – the amount of your first release.
32. What would happen to this value if you issue another release with a value of $1,800?
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 92
Run the Purchase Order and Releases Detail Report
33. Navigate to the Submit Request window
• (N) Reports > Run − Name = Purchase Order and Releases Detail Report − Purchase Order Numbers From = Your blanket purchase agreement number − [Purchase Order Numbers] To = Your blanket purchase agreement number
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 93
34. (B) OK
35. (B) Submit
36. (B) No
37. Monitor progress and view output when complete
• (M) View > Requests
38. (B) Find
39. Once the request completes, (B) View Output
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 94
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional
implementation considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 95
When to Use a Contract Purchase Agreement
When to Use a Contract Purchase Agreement
Contract Purchase Agreement:• Terms and conditions are known• Details of goods or services are not known• Reference contract purchase agreements directly
on standard purchase order lines
Contract purchaseagreement
Delivery 1Standard PO 1
Delivery 2Standard PO 2
When to Use a Contract Purchase Agreement
Definition You create contract purchase agreements with your suppliers to agree on specific terms and conditions without indicating the goods and services that you will be purchasing. A contract purchase agreement is an agreement between you and a supplier for unspecified goods or services. This agreement may include terms and conditions, committed amount and an effective and expiration date. Contract purchase agreements are referenced on standard purchase order lines. Purchasing monitors the amount you have spent against contract purchase agreements. Focus of discussion Rather than reiterate the many fields that have already been discussed during the creation of a standard purchase order, this section will highlight the differences between the contract purchase agreement and the standard purchase order. Your instructor will review the previously discussed fields as needed during the demonstration of creating a contract purchase agreement.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 96
Contract Purchase Agreements Additional Information Entered
Contract Purchase Agreements Additional Information Entered
Additional information is enteredfor contract purchase agreementsin the header element window.
Once the contract is approved,you issue standard purchaseorders referencing the contractthrough the Line windows/ReferenceDocuments tabbed region.
Contract Purchase Agreement
Header
Header
Line
Shipment
Distribution
Standard PO
Contract Purchase Agreements: Additional Information Entered
Purchasing Responsibility (N) Purchase Orders > Purchase Orders Header This agreement may include terms and conditions, committed amount, and effective and expiration dates. Amount Agreed When creating a contract purchase agreement, you can indicate the dollar amount of the agreement. Released The dollar value displayed in this field is the total dollar value of all standard purchase order lines referencing the contract. Terms and Conditions You can access the Agreement Controls area of the Terms button. The effective start and stop dates for the contract can be entered. Standard purchase orders can only reference the contract during its effective dates. Part of the terms and conditions could include a percentage discount
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 97
off list prices for all products the supplier sells or different discounts for different groups of products. For example, maybe they’ll give you a 10% discount on equipment and a 20% discount on office supplies. You can optionally change the defaulted value for the Amount Limit. Initially this value is equal to the Amount Agreed. You may provide a higher value in the Amount Limit field which will allow the released amount to total in excess of the Amount Agreed, but not higher than the Amount Limit. Compliance with agreed upon terms and conditions will be monitored after purchases are made to ensure things like item pricing or delivery times are in agreement with any discounts stated in the contract. Line, Shipment and Distribution Windows Although these windows appear as part of the Purchase Order form, you cannot enter these details on a contract purchase agreement. These details will be provided once the contract is approved as standard purchase orders are issued with reference to the contract.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 98
Standard Purchase Order Line Reference Documents Tabbed Region
Standard Purchase Order Line Reference Documents Tabbed Region
ItemsPrice ReferenceReference Documents
Num, Contract, Quotation,Line, Quotation Type,Supplier Quotation
More
HEADER
LINE
SHIPMENT
DISTRIBUTION
Standard Purchase Order
Standard Purchase Order Line - Reference Documents Tabbed Region
Contract You cannot enter a contract number until you have entered a supplier in the header, and the contract must be for this supplier. The contract you choose must be effective; that is, the current date has to be within the effective date and the expiration date of the contract. If you reference a contract purchase agreement on a standard purchase order line, Purchasing adds the total amount of the purchase order line to the total amount of the contract purchase agreement after the purchase order is approved. Purchasing lists only those contracts with the same supplier as the one on your standard purchase order. Automating Purchase Order Generation Automatic generation of standard purchase orders referencing contract purchase agreements can be done using the PO Create Documents workflow. For more information see the Automatic Document Creation topic or refer to the “Workflow for Creating Purchase Orders and Releases” topic in the Purchasing Users Guide.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 99
Guided Demonstration - Create a Contract Purchase Agreement (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Purchase Orders > Purchase Orders
Create a Contract Purchase Order
1. Type = Contract Purchase Agreement
2. Supplier = XXIBM Corporation
3. Site = NEW YORK
4. Ship-To = M1-Seattle
5. Bill-To = V1-New York
6. Amount Agreed = 10000
7. Save
8. Record the number of your Contract Purchase Agreement.
Enter Terms and Conditions
9. (B) Terms
10. Payment Terms = Immediate
11. Effective From = Today
12. Effective To = One week from today
13. Amount Limit = 10000
14. Save
15. Close the Terms and Conditions window.
Approve the Document
16. (B) Approve
17. Submit for Approval = Checked
18. Uncheck all other options
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 100
19. (B) OK
20. (B) OK to close the note window.
Place your Purchase Order on the Navigator
21. Place your Purchase Order on the Navigator
22. (M) File > Place on Navigator
23. Close windows until you are back at the Navigator
Associate with Contract with Standard Purchase Order Lines
24. Create a standard purchase order.
25. Select the Reference Documents tab and enter the contract agreement number.
26. Save and approve your purchase order.
27. Record the number of your standard purchase order.
Note: If the total amount of the purchase orders associated with the contract exceeds the contract, the purchase order cannot be approved.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 101
Practice - Create a Contract Purchase Agreement
Overview
In this practice, you will do the following:
• Create a contract purchase agreement to establish general terms and conditions with this supplier. Items, quantities and delivery dates/locations are not known.
• Create a standard purchase order referencing the contract.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
Tasks
Log on to the System
Create a contract purchase agreement
Submit your contract agreement for approval
Issue a standard purchase order referencing the contract
Enter an expense item that you need to order
Submit your standard purchase order for approval
Return to the Contract Purchase Agreement to view how it was updated as a result of the release
Run the Contract Status Report
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 102
Solution - Create a Contract Purchase Agreement
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create a contract purchase agreement
1. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders − Type = Contract Purchase Agreement − Supplier = Consolidated Supplies − Site = DALLAS − Ship-to = M1-Seattle − Bill-to = V1-New York City − Amt Agreed = $10,000
2. Navigate to the Terms and Conditions window
• (B) Terms − Payment Terms = Immediate
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 103
− Agreement Controls/Effective Dates = Enter dates starting Today and extending for six months
− Amount Limit = $10,000
3. Close Terms and Conditions window
4. Save
Submit your contract agreement for approval
5. Navigate to the Submit for Approval window
• (B) Approve − Submit for Approval = Check box − Uncheck all other options
6. (B) OK
7. (B) OK
8. Ensure that the status on the purchase order header is Approved and record your contract number __________
Issue a standard purchase order referencing the contract
9. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders − Type = Standard Purchase Order
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 104
− Supplier = Consolidated Supplies − Site = DALLAS − Ship-to = M1-Seattle − Bill-to = V1-New York City
Enter an expense item that you need to order
10. (T) Items − Num = 1 − Item = AS80001 − Quantity = 10 − Price = $50.00 − Need-By = Two weeks from today
11. (T) Reference Documents − Contract = Your PO number that was assigned to the contract.
12. Enter shipments for this item
• (B) Shipments − Org = M5 − Ship-To = M5-Denver
13. Enter distributions for this shipment
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 105
• (B) Distributions − Subinventory = Stores
14. Save
Submit your standard purchase order for approval
15. Navigate to the Submit for Approval window
• (B) Approve − Submit for Approval = Check box − Uncheck all other options
16. (B) OK
17. (B) OK
18. Ensure that the status on the purchase order header is Approved and record your contract number __________
Return to the Contract Purchase Agreement to view how it was updated as a result of the release
19. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders
20. Using either find or query functionality, locate your contract purchase agreement
21. Notice the value in the Released field is $500 – the amount of your first release.
22. What would happen to this value if you issue another release with a value of $2,000?
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 106
Run the Contract Status Report
23. Navigate to the Submit Request window
• (N) Reports > Run − Name = Contract Status Report − PO Numbers From and To = Your contract purchase agreement number
24. (B) OK
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 107
25. (B) Submit
26. (B) No
27. Monitor progress and view output when complete
• (M) View > Requests
28. (B) Find
29. Once the request completes, (B) View Output
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 108
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional
implementation considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 109
Purchase Order Inquiry
• Use the Purchase Order Summary window– Optionally create a custom user layout of form
• Use the Tools menu to view associated– Requisitions– Receipts– Invoices– Action History
• Use the Purchase Order window– Find functionality– Query functionality
Purchase Order Inquiry
Purchase Order Inquiry
You will frequently need to find information from a purchase order. Several options are available to assist you in this effort. Use the Purchase Order Summary Windows You can enter a variety of search criteria to locate records at the header, line, shipment or distribution levels of the purchase order. Buttons located at the bottom of the form allow you to view more or less detail than the level at which you initially searched. For example, assume you initially searched for shipment lines. From there you can move higher on the purchase order to view items or you can drill down to view distributions. Optionally, you can create a custom user layout of this form using Oracle’s folder technology. Custom layouts can be defined as the default folder and can be shared with others. Use the Tools Menu to View Associated Records From the purchase order lines, you can view associated requisitions, receipts, and invoices. Some of the associated documents can only be viewed when query results are at a particular level of the purchase order. For example, you cannot view associated requisitions when
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 110
viewing purchase order query results at the header level. Additionally, you can view a history of activities performed on each document. This functionality is available through the Tools menu, View Action History option on many windows. Activities will be listed in chronological order with the most recent activity appearing first. Use the Purchase Order Window You can look for purchase order information using either query or find functionality.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 111
Modifying Purchase Orders
Modifying Purchase Orders
You can access and modify your purchase orders
• Reapproval Rules
• Revision numbering of purchase orders– PO #1245– PO #1245-1 1st revision– PO #1245-2 2nd revision
Modifying Purchase Orders
Once the desired purchase order is brought to the current record using the various methods previously discussed for locating documents, you can make necessary changes to the document. For example, you may adjust quantities, shipping addresses, need-by dates, distributions, etc. Affect of Changes on Approval Most changes cause the document’s status to be updated to Requires Reapproval. Once the document has been reviewed by someone with approval authority, they will either approve or reject the document. Generally, all changes affecting the supplier’s ability to accurately fill the order will require reapproval. Controlled changes unapprove either the document header alone or both the header and its shipments. However, you can continue to receive against approved shipments even when the header is unapproved. Revision Numbering of Purchase Orders Depending on the type of modification made to a purchase order, Purchasing may increment the revision number on the document.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 112
Printing Purchase Orders
Printing Purchase Orders
• Only approved purchase orders can be printed• From the Submit for Approval window:
– Default communication method checked according to supplier definition
• Select the Printed Purchase Order report from the Reports menu
Printed purchase order
Printing Purchase Orders
Purchase orders can be printed on demand or through a scheduled print process. Purchase orders sent to suppliers need to be approved. Various criteria are available as parameters on the Printed Purchase Order report to selectively print certain purchase orders. For example, you could print only new purchase orders or only changed purchase orders or both. You could print a single purchase order or a range of purchase orders and also have the option of printing in test mode if needed. You will frequently reformat the output of the Printed Purchase Order Report delivered with the system. Typical changes made include adding company logos, background design or borders and outlines. You can make these report changes by taking a copy of the current report and then adjusting the copy using Oracle Reports (included in the Developer suite of applications).
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 113
Creating Purchase Order Revisions
Creating Purchase Order Revisions
Two “Archiving” Options
At the time of approval
At the time of printing
Creating Purchase Order Revisions
Purchase order revisions are created through archiving which is the process of recording all historical versions of approved purchase orders. Purchasing automatically archives a purchase order when you approve it for the first time. Purchasing subsequently archives your purchase orders either during the reapproval process or as a result of printing. You can create multiple revisions of your purchasing documents (standard purchase orders, planned purchase orders, blanket purchase agreements and contract purchase agreements). All revisions begin at 0, and Purchasing increments this revision number by 1 when you make changes to controlled information and the current revision number is equal to the archived number. Purchasing prints the most current revision to send to the supplier. As a result, the first revision that you print might not be 0 if you are archiving on approval. If you’re sending purchase orders through EDI, then archiving must be set to approval rather than printing. Use the Document Types window to set whether each of these documents is archived upon approval or upon printing. This window will be discussed in more detail in the Document Security, Routing and Approval module.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 114
Archiving Purchase Orders
Archiving Purchase Orders
Step 1: Create/save PO
Step 2: Approve PO
Step 3: Change quantity
Step 4: Reapprove PO
Step 5: Print PO
Step 6: Add an item
Step 7: Reapprove PO
Step 8: Print PO
None
0
0
1
1
1
2
2
0
0
1
1
1
2
2
2
Action ArchiveRevision
CurrentRevision
ArchiveRevision
CurrentRevision
Approval Printing
None
0
0
0
0
0
1
1
0
0
0
0
0
1
1
1
Archiving Purchase Orders
At the Time of Approval When archiving is set to occur at the time of approval, revision numbers may be generated more frequently. Therefore, revision numbers will generally be higher on documents when using this option. At the Time of Printing When archiving is set to occur at the time of printing, revision numbers may be generated less frequently. Therefore, revision numbers will generally not be as high on documents when using this option.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 115
Purchase Order Statuses - Typical Cycle
Purchase Order Statuses - Typical Cycle
No
Submit for Approval
In Process
Approve?
Approved
Changes Made
Rejected
Incomplete
Canceled
Closed
Requires Reapproval
Finally Closed
On Hold
Frozen
Pre-Approved
Approve?Yes
No
Yes
Open
Purchase Order Statuses - Typical Cycle
Above is an example of a typical cycle for purchase order statuses. The initial status is Incomplete until submitted for approval. The status is updated to In Process until it is either Pre-Approved, Approved or Rejected. Once approved, many changes made to purchase orders result in a status of Requires Reapproval. Once reapproved, the status is again Approved. Where to Update Statuses Purchase order statuses can be updated either in the Purchase Order window or in the Purchase Order Summary window. Actions available to effect statuses will be different dependent on the current document status and where you are updating. Review of Status Types
• Incomplete - Initial status on all new purchase orders. • In Process - Status of the document when it’s sitting on the “desk” of the approver
identified in your security, routing and approval setups.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 116
• Approved - A user with sufficient authority has reviewed and approved the document. • Rejected - Status of the document when the approver has denied approval. • Requires Reapproval - Status of the document when controlled changes have been made
to the document. • Frozen - You can freeze only at the header and release level. You freeze a purchase
order when you want to prevent any future modifications to the purchase order. When you freeze a purchase order, you can still receive and pay for goods you already ordered.
• On Hold -You can place a purchase order on hold only at the header level. This unapproves the purchase order while preventing printing, receiving, invoicing, and future approval until you remove the hold.
• Closed - Purchasing automatically closes shipments for receiving and invoicing based on controls that you specify in the Purchasing Options window. Once all shipments for a given line are closed, Purchasing automatically closes the line. When all lines for a given header are closed, Purchasing automatically closes the document. Purchasing does not include closed shipments in the Open Purchase Order reports.
- Closed for Receiving - You can close for receiving at the header, release, line, and shipment levels. Note that if you close for receiving a purchase order header that is currently open, Purchasing sets the status of all purchase order shipments to Closed for Receiving, but the purchase order lines and header remain open.
- Closed for Invoicing - You can close for invoicing at the header, release, line, and shipment levels. Note that if you close for invoicing a purchase order header that is currently open, Purchasing sets the status of all purchase order distributions to Closed for Invoicing, but the purchase order lines and header remain open. The Close for Invoicing status does not prevent you from matching an invoice to a purchase order or to a receipt. You can close and reopen documents and their components for invoicing and receiving using the Control Document window.
• Open - You can reopen documents (at the header, release, line and shipment levels) that have been previously closed to allow additional actions to be performed.
• Canceled - Purchasing lets you terminate an existing commitment to buy from a supplier by canceling document headers, lines, shipments, or releases. When you cancel a purchase order entity, you are unable to receive or pay for cancelled items and services, however, you can pay for all previously received orders. Canceled actions are permanent and can not be reversed. If you are using online requisitions, Purchasing returns unfilled requisitions associated with cancelled purchase order entities to the requisition pool based on the Cancel Requisitions control you specify in the Purchasing Options window.
• Finally Closed - Prevent modifications to or actions against completed documents, lines, and shipments by final closing them. Final-closed documents are not accessible in the corresponding entry forms, and you cannot perform the following actions against final-closed entities: receive, transfer, inspect, deliver, correct receipt quantities, invoice, return to supplier, or return to receiving. You can approve documents that include final-closed entities, but you cannot approve documents that are final closed at the header level. Final closing documents is an internal control action that has no bearing on your contractual relationship with the supplier. You cannot undo a final-close action.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 117
Note: Only documents that have never been approved can be deleted. Optionally, you can delete unapproved lines, unapproved shipments and unapproved distributions added to previously approved documents. Deleted records cannot be viewed once the action is saved. If you are using automatic numbering, you cannot reuse document numbers that you delete with this option. If you use online requisitions, Purchasing returns all requisitions associated with your delete action to the requisition pool. You can reassign these unfilled requisitions to other purchase orders or releases.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 118
Entering Purchase Order Acceptances
Entering Purchase Order Acceptances
• Action• Action Date• Accepted By• Accepted• Acceptance Type
Entering Purchase Orders Acceptances
When you select the Acceptance Required check box in the terms and conditions of purchasing documents, you require your supplier to formally accept your purchase agreement offer. By choosing Acceptances from the Tools menu from the Purchase Order and Releases window, you can access the window to enter acceptances. Suppliers can enter their own acceptances using iSupplier Portal Action Enter the results of your supplier follow-up. This a free-form field with no list of values. You can easily record the type of follow-up you performed such as Follow-up telephone call, Follow-up letter, or Fax follow-up. You can also use this field to record the outcome of the follow-up such as Will call back, No answer, Schedule slippage, or Cannot fulfill order. Action Date Enter the date the action occurred on. The default is today’s date, but you can override to another date. Accepted By Enter the person who performed the action. Your name is the default, but you can change to any other name from the employee list of values displayed.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 119
Accepted Check this box to indicate that the supplier accepted the purchase order. Acceptance Type Select the acceptance type from the seeded options below.
• Accepted All Terms - The supplier accepted all the terms of the purchase order. • On Schedule - The supplier agreed to meet the delivery dates on the purchase order. • Unacceptable Changes - The supplier made modifications to the terms of the purchase
order that you do not find acceptable. You can define additional acceptance types through the Purchasing Lookup Codes.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 120
Workflow Notifications
Workflow Notifications
REQ#583 Joe Holt Rejected
REQ#577 Sue Smith Requires
Reapproval
PO#325 Kevin Jones Incomplete
Electronic notification
PO#325 requires your attention. Its status is Incomplete. Kevin
Joe
Sue
Electronic notification
REQ#577 requires your reapproval.
Electronic notification
REQ#583 has been rejected.
Workflow Notifications
The workflow PO Send Notifications for Purchasing Documents notifies you of various situations that have occurred with your purchasing documents. Among the situations for which you’ll be notified include documents with statuses of incomplete, rejected, or requires reapproval. This workflow will also notify you when the date supplier acceptances were requested has passed without acknowledgement of their acceptance. You can view and respond to these notifications through the Notifications Summary window. This workflow process is initiated by submitting the Send Notifications for Purchasing Documents process. You will normally schedule that process to run on at least a daily basis.
Opening a Document From a notification that you have opened, you can also drill down to the document. Depending on the function security assigned to your responsibility, you have varying levels of access to information. After you modify a document opened through the notification, you must return to the notification and choose Approve there, not in the document itself, so that Purchasing can record your approval action and continue with or complete the approval process. Depending on the notification message, recipients will be able to take actions such as approve, reassign, forward, reject, ignore, or close.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 121
Copying Purchase Orders
Blanket purchase agreementSelf-defined Catalog orStandard quotation
(Catalog quotation class)
Blanket purchase agreementCatalog or Standard quotation (Catalog quotation class)
Standard or plannedpurchase order
Self-defined Bid quotation (Bid quotation class)
Standard or planned purchase order
Bid quotation(Bid quotation class)
Planned purchase orderPlanned purchase order
Blanket Purchase Agreementor RFQ
Blanket Purchase AgreementStandard Purchase OrderStandard Purchase Order
TOFROM
Copying Purchase Orders
Copying Purchase Orders
You can copy purchase orders of any status. Above is a list of the documents that can be copied from and to. This feature is particularly helpful if, for example, you want to renew a blanket purchase agreement that contains hundreds of lines. Rather than manually entering the same lines again into a new document, you can copy the previous agreement to a new agreement and change the effectivity dates. How to copy documents:
• Query the document you want to copy from the Purchase Orders, Purchase Order Summary, or Quotations windows.
• Choose Copy Document from the Tools menu. • Select an eligible To Document Type. • Select other options if needed.
- Document Number: Enter a document number only if you use manual numbering. - Copy Attachments: Check this box to copy an attachment from any level of the
document.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 122
Purchasing creates and displays the new document. The document is an exact copy of the original except for the Promised and Need-By dates; if these dates are past dates, they change to today’s date on the new document. Effectivity dates, if any, do not change. Modify the document if needed. Save and approve the document. If information in the document you have just copied is invalid or outdate. For example, if a supplier or account is inactive or invalid, a message window appears after you choose Approve. Use this window to help you identify and correct invalid or outdated fields in the new document you are creating. You cannot approve the document until you update these fields appropriately. You cannot use the Copy Documents window to modify documents by copying from one document to another with the same document number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 123
Agenda
Agenda
• Overview of purchase orders• Create standard purchase orders• Create blanket purchase agreements
and releases• Create contract purchase agreements• Maintain/adjust purchase orders• Identify key standard reports• Understand setup options• Understand additional
implementation considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 124
Reports
Reports
Blanket and Planned PO Status Report
Canceled Purchase Orders Report
Contract Status Report
Printed Change Orders Report (Landscape)
Open Purchase Orders Report (by Buyer)
Open Purchase Orders Report (by Cost Center)
Reports
Blanket and Planned PO Status Report Review blanket and planned purchase orders and related releases. Canceled Purchase Order Report Review canceled purchase orders. Contract Status Report Review the status of contracts and list purchase orders regarding each contract. Open Purchase Orders Report (by Buyer) Review all or specific purchase orders for specific buyers. Open Purchase Orders Report (by Cost Center) Review all or specific purchase orders charged to one or more cost centers. Printed Change Orders Report (Landscape) Print changed purchase orders in landscape
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 125
Reports
Reports
Printed Purchase Order Report (Landscape)
Printed Purchase Order Report (Portrait)
Purchase Agreement Audit Report
Purchase Order Distribution Detail Report
Purchase Order Commitment by Period Report
Purchase Order Detail Report
Printed Change Orders Report (Portrait)
Reports (continued)
Printed Change Orders Report (Portrait) Print changed purchase orders in portrait format. Printed Purchase Order Report (Landscape) Print purchase orders in landscape format. Printed Purchase Order Report (Portrait) Print purchase orders in portrait format. Purchase Agreement Audit Report Review items purchased on a standard order that could have been purchased on a blanket. Purchase Order Commitment by Period Report Review the monetary value of commitments for the next six periods for one or all suppliers. Purchase Order Detail Report Review details for all or specific standard or planned purchase orders. Purchase Order Distribution Detail Report Review accounting distributions for purchase orders.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 126
Reports
Reports
Purchase Summary Report by Category
Purchasing Activity Register
Purchase Order and Releases Detail Report
Reports (continued)
Purchase Order and Releases Detail Report Review details (quantity ordered, received, billed and expected) for blanket purchase agreements, planned purchase orders and associated releases. Purchase Summary Report by Category Review the number of orders placed with suppliers for a given category. Purchasing Activity Register Review purchase order monetary activity for a period of time.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Purchase Orders Chapter 7 - Page 127
Summary
Summary
You should now be able to do the following:• Create standard, blanket and contract
purchase documents• Create blanket purchase agreement releases• Maintain purchase orders• Identify key reports• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 1
Automatic Document Creation Chapter 8
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 2
Automatic Document Creation
Automatic Document Creation
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 3
Procure to Pay Lifecycle
Procure to Pay LifecycleRequisitions
Purchase Orders
Receiving
Reporting
Invoice/ Payment
Supplier Performance
Supplier management
RFQs/ Quotations
Catalog Content
Management
Sourcing
Ordering
Analysis
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 4
Objectives
Objectives
After completing this module you should be able to do the following:• Use the AutoCreate window to automate the
creation of purchase documents• Use the Create Releases program to generate
blanket purchase agreement releases• Understand how the PO Create Documents
workflow can automatically create purchase documents without buyer intervention
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 5
Agenda
Agenda
• Understand AutoCreate• Understand the Create Releases program• Understand the PO Create Documents workflow• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 6
Creating Purchase Documents from Requisitions
Creating Purchase Documents from Requisitions
Requisition Pool
WorkflowCreateReleases
AutoCreate
Purchase Documents
Creating Purchase Documents from Requisitions
AutoCreate The AutoCreate window can be used to search for approved requisitions in the requisition line pool. Those requisitions can be used as a basis for creating RFQs, standard purchase orders, blanket purchase agreement releases and planned purchase orders. Buyer intervention is required to search the requisition pool and create the purchase documents. Use the Create Releases Program The Create Releases program is a concurrent request that may be scheduled to run periodically. The Create Releases program can be used to generate blanket purchase agreement releases. Buyer intervention to be eliminated for certain types of purchases by using the Create Releases program. Workflow The PO Requisition Approval workflow automatically runs the PO Create Documents workflow. Depending upon your implementation decisions, the PO Create Documents workflow will end with unapproved or approved standard purchase orders or blanket purchase agreement releases. Using the PO Create Documents workflow can make it possible to eliminate buyer intervention for certain types of purchases.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 7
Benefits of Using AutoCreate
Benefits of Using AutoCreate
• Simplifies consolidation of similar requests• Ensures ordering from negotiated sources• Expedites fulfillment of goods and services• Streamlines procurement process
Benefits of using AutoCreate
The AutoCreate window can be used to search for requisition lines for specific items or similar items. After finding requisition lines, you can make decisions about how to consolidate similar requests and ensure the resulting purchase documents are sent to the appropriate suppliers.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 8
Overview of AutoCreate
Overview of AutoCreate
Requisitionlinepool
Query available requisition lines
POChoose lines
fromquery results
Automaticcreation
Manualcreation
PO
Overview of AutoCreate
Purchasing Responsibility (N) AutoCreate Requisition Line Pool To create blanket purchase releases, standard purchase orders or planned purchase agreements, the requisition line must have a status of Approved and not be associated with an existing purchase document. For RFQs the requisition lines do not need to have a status of Approved. Externally sourced requisition lines can be for system items (including outside processing items) or one-time items (a description and a category). Internally sourced requisition lines are supplied by internal sales orders and are not available for AutoCreation. Automatic Creation Use Automatic Creation mode to create purchase orders, blanket releases, planned purchase orders or RFQs with a minimum number of keystrokes.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 9
Manual Creation Use manual creation mode to create purchase orders, blanket releases, planned purchase orders or RFQs and control the placement and grouping of requisition lines. Note: Internally sourced requisition lines are supplied by internal sales orders, so they are not available for autocreation. Internal requisitions will be covered in an advanced topic.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 10
Automatic Creation Mode
Automatic Creation Mode
1. Find requisition lines2. Select document creation criteria3. Select requisition lines4. Choose the Automatic button
Automatic Creation Mode
You provide search criteria to locate the requisition lines you want to place on a purchase order or RFQ. After reviewing the requisition lines, you select all lines that you want. Then you select the Automatic button to create the purchase order or RFQ. You have the option to group requisition lines with the same item, revision, line type, unit of measure, and transaction reason into individual purchase order lines. Similarly, you can group requisition lines with the same item, revision, and line type into individual RFQ lines. Use automatic creation mode when:
• A majority of the requisition lines that your search criteria located are items you want to place on the document.
• You want Purchasing to determine where to place the requisition lines on the document. • You want Purchasing to combine similar requisition lines. • You are creating or adding to a release. • You are using Requisition grouping.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 11
Find Requisition Lines
Find Requisition Lines
FindClear
ItemStatus
1 EntersearchCriteria and click Find
Item, Rev
Category
Description
Approved
Buyer
Yes
Stock, Ms. Pat
Find Requisition Lines
Use the Find Requisition Lines window to search for requisition lines based on a variety of different criteria including:
• Approved • Requester • Requisition • Preparer • Buyer • Supplier • Supplier Site • Ship-To • Item • Description
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 12
You can find unapproved requisition lines by setting Approved to No. However, you will only be able to create RFQs from unapproved requisition lines.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 13
Select Document Creation Criteria
Select Document Creation Criteria
AutomaticManual
Requisition Line Item Category Description UOM Qty| 422 | 1 | CM22 | PROD9 | MAIN PART | EA | 15 || 437 | 1 | CM22 | PROD9 | MAIN PART | EA | 85 |
ActionDocument TypeGrouping
2 Select document creation criteria
Selecting Document Creation Criteria
Action Choose one of the following document actions:
• Create - Create a new purchase document • Add To - Add to an existing purchase document
Document Type Choose from the following document types:
• Standard PO • Blanket Release • Planned PO • RFQ
Grouping Choose one of the following grouping options:
• Default - requisition lines for the same item, revision, line type, unit of measure, and transaction reason are combined into individual purchase order lines.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 14
• Requisition - the autocreated documents parallel the structure of the requisition from which they were created. If you select multiple requisition lines from the same requisition, they will not be grouped (even if the lines are exactly the same) and will create multiple lines on the resulting purchase document. For example 5 requisition lines will create 5 lines on the resulting purchase document. When using requisition grouping, you can select lines from one requisition only and you cannot use manual creation mode.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 15
Select Requisition Lines
Select Requisition Lines
AutomaticManual
Requisition Line Item Category Description UOM Qty
| 422 | 1 | CM22 | PROD9 | MAIN PART | EA | 15 || 437 | 1 | CM22 | PROD9 | MAIN PART | EA | 85 |
Action: CreateDocument Type: Standard POGrouping: Default
3 Select requisition lines
Select Requisition Lines
Requisition lines are ordered by item, item category and then need-by date.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 16
Select Automatic Creation Mode
Select Automatic Creation Mode
AutomaticManual
Requisition Line Item Category Description UOM Qty| 422 | 1 | CM22 | PROD9 | MAIN PART | EA | 15 || 437 | 1 | CM22 | PROD9 | MAIN PART | EA | 85 |
Action: CreateDocument Type: Standard POGrouping: Default
4 Click Automatic
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 17
Autocreate New Document Window
Autocreate New Document Window
AutomaticManual
Requisition Line Item Category Description UOM Qty| 422 | 1 | CM22 | PROD9 | MAIN PART | EA | 15 || 437 | 1 | CM22 | PROD9 | MAIN PART | EA | 85 |
Action: CreateDocument Type: Standard POGrouping: Default
CancelCreate
Document
Supplier Supplier Site
Currency Source: DefaultFirst Requisition LineSpecify
Autocreate New Document Window
You can accept the default values in this window or make changes if appropriate. After selecting the Create button, the PO: Display the AutoCreated Document profile option will determine if Purchasing opens the appropriate transaction window (Purchase Orders window or RFQs window) and displays the created line(s). The supplier and supplier site are not required fields in this window. However, if AutoCreate creates the document without a supplier and supplier site, they must be added to the purchase document before it can be approved.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 18
Manual Creation Mode
Manual Creation Mode
1. Find requisitions2. Select document creation criteria3. Click Manual to open the Document Builder4. Manually combine the requisition lines to build the
document line by line
Manualcreation
Manual Creation Mode
Manual creation mode lets you take control of the actual placement of requisition lines on purchase order lines. You move each line into the position you want it on the document by using the Document Builder. You can combine like requisition lines onto a single document line. If you want to combine two requisition lines for the same item, one with a predefined item and one with a one-time item (a line with a category and description), use Modify on the Tools menu to change the one-time item line to the predefined item. Use manual creation mode when:
• You want to manually choose the requisition lines to combine onto a single document line.
• You want to specify the location of the items on the document (for example, specify which purchase order lines the requisition lines will become).
• You want to ensure you get the negotiated price when combining multiple requisition lines with different prices.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 19
Add to Existing Document
Add to Existing Document
• Select the Action type– Select Add To for additional lines on an existing
document• Select the requisition lines to add• Select creation mode
– Automatic to simply add the selected lines– Manual to add the lines as you wish
• Specify the existing document number to add to
Add to Existing Document
You can add lines to existing documents only if your security criteria allow you to modify them.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 20
Modify Requisition Lines
Modify Requisition Lines
• Highlight requisition line to be modified• Navigate to Modify Lines window• Split existing requisition lines
– To be autocreated for different suppliers– To be autocreated as different items
Modify Requisition Lines
Use the Modify feature when you want to split an existing requisition line into multiple requisition lines that represent the same or different items. For example, if the requisition line quantity is so large that a single supplier cannot fill the entire order by the need-by date, you can split the requisition line and assign the split lines to different purchase documents written to different suppliers. In an additional example, if you have a requisition line item that contains parts that you want to order as unique items, you can split the requisition line into several lines. Enter as many new lines as you need to represent the original requisition line. For each newly created line, Purchasing automatically creates distribution lines and prorates quantities for the new distributions based on the original requisition line distributions. When you return to the AutoCreate Documents window, Purchasing displays the new requisition lines that are now available for placement on a purchase order or RFQ if they meet your original search criteria. The original requisition line is no longer available for purchase order or RFQ placement, but your requester can easily review the modification status of a requisition line in the Requisitions Summary window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 21
Return Requisition Lines
Return Requisition Lines
• Highlight requisition line to be returned• Navigate to Return Requisitions window• Return requisition line to requestor with reason for
return. For example:– Goods or services no longer available– Price increase requires requisition reapproval
• Remaining lines on requisition are automatically returned to requestor
Return Requisition Lines
Purchasing lets you return a requisition line to the requisition preparer. You might want to return a requisition line if you are unable to obtain the requestor’s price and want the requestor to resubmit the requisition for approval at a higher price. From the Tools menu, select Return Requisitions to display the Return Requisitions window. Enter a reason for the return and select OK to return all requisition lines on the current requisition except any lines from the requisition already placed on a purchase order. When you return requisition lines, they are no longer available in the requisition pool. Once a requisition submitted in Purchasing has been approved, the requisition must be returned for the original submitter to make changes to it. If the requisition was submitted using iProcurement, the requestor can use the Withdraw feature to make changes and re-submit the requisition. The Withdraw feature is not available in Purchasing and can only be used in iProcurement if no lines on the requisition are associated with purchase documents. The Send Notifications for Purchasing Documents program will distribute notifications for returned requisitions. This program should be scheduled to run periodically.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 22
Guided Demonstration - Return a Requisition (Required)
Responsibility: System Administrator
(N) Profile > System
Return a requisition to the sender. Find the purchase requisition you created and return it to the requester; note a reason for returning the requisition.
Prevent Buyer Override in AutoCreate Window
1. Responsibility = System Administrator
2. Navigate to the System Profiles window
3. (N) Profile > System
4. Responsibility = Checked
5. Responsibility = XXPurchasing, Vision Operations
6. Profile = PO: Allow Buyer Override in Autocreate Find
Profile Site Application Responsibility User
PO: Allow Buyer Override in Autocreate Find Yes No
7. (B) Find
Return a Requisition
8. Responsibility = XXPurchasing, Vision Operations
9. Open the Find Requisition Lines window:
10. (N) AutoCreate
11. Requisition = Your purchase requisition created using the supplier item catalog
12. (B) Find to open the AutoCreate Documents window.
13. Open the Return Requisitions window:
14. (M) Tools > Return Requisition
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 23
15. In the Reason field, enter a reason for returning the requisition.
Note: The return reason can be viewed in the Action History window.
16. (B) OK
Note: This action returns ALL requisition lines associated with this requisition unless they have been placed on a purchase document.
ReApprove your requisition
17. Open the requisitions window.
18. (N) Requisitions > Requisition Summary
19. Enter your requisition number in the Requisition Number field.
20. (B) Find
21. Note the approval status.
22. (M) View > Action History
23. Close the Action History window
24. (B) Open
25. (B) Approve
26. Submit for Approval = Checked
27. Uncheck all other options
28. (B) OK
29. (B) OK to close the note window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 24
Guided Demonstration - AutoCreate a Purchase Order (Required)
Responsibility: XXPurchasing, Vision Operations
(N) AutoCreate
Autocreate a Standard Purchase Order
1. Enter the number of your purchase requisition in the Requisition field.
2. (B) Find to open the AutoCreate Documents window.
3. Action = Create
4. Document Type = Standard PO
5. Grouping = Default
6. (M) Edit > Select All to select all lines
7. (B) Automatic
8. Supplier = XXIBM Corporation
9. (B) Create
10. Record the purchase order number.
11. (B) OK to close the note window.
12. Save the purchase order but don’t approve it.
Place your Purchase Order on the Navigator
13. Place your Purchase Order on the Navigator
14. (M) File > Place on Navigator
15. Close windows until you are back at the Navigator
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 25
Practice - Return a Requisition
Overview
In this practice, you will use the AutoCreate form to return a requisition.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create an Expense Item
Create an expense item that will be purchased by the M1-Seattle Manufacturing inventory organization. Set t he item attributes based on the following information.
1. Navigate to the Master Items window − Item = XXSoftware − Description = Expensed Item − Purchased = Checked − Purchasable = Checked − Default Buyer = Stock, Ms. Pat − Use Approved Supplier = Unchecked − List Price = 450 − Expense Account = 01-510-7530-0000-000
Enable the Item in an Inventory Organization
2. Enable the item in the M1-Seattle Manufacturing inventory organization.
Create an Inventory Item
3. Create an inventory item that will be purchased by the M1-Seattle Manufacturing inventory organization. Set t he item attributes based on the following information.
− Item = XXMonitor − Description = Inventory Item − Purchased = Checked
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 26
− Purchasable = Checked − Use Approved Supplier = Unchecked − Default Buyer = Stock, Ms. Pat − List Price = 250 − Inventory Item = Checked
Enable the Item in an Inventory Organization
4. Enable the item in the M1-Seattle Manufacturing inventory organization.
Requisition your Expensed Item
5. Add your expensed item to a requisition.
6. Navigate to the Requisitions window − Description = XXPurchases − Item = XXSoftware − Quantity = 10 − Need-by = Today’s Date − Destination Type = Expense − Organization = Vision Operations − Location = V1- New York City − Supplier = Blank − Site = Blank
Requisition your Inventory Item
7. Add your inventory item to a requisition − Item field on line 2 = XXMonitor − Quantity = 5 − Need-by = Today’s Date − Destination Type = Inventory − Organization = Seattle Manufacturing − Location = M1 – Seattle − Supplier = Blank − Site = Blank
Approve the Requisition
8. Submit your requisition for approval
Return your Requisition
9. Use the AutoCreate form to query your requisition and return it. Supply a return reason.
ReApprove your Requisition
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 27
10. Find your requisition using the Requisition Summary window
11. View the Return Reason in the Action History window
12. Resubmit your requisition for approval.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 28
Solution - Return a Requisition
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create an Expense Item
1. Choose the organization
2. (N) Change Organization
3. From the list of values, choose M1-Seattle Manufacturing and click OK
4. Open the Master Item window:
• (N) Items > Master Items − Item = XXSoftware − Description = Expensed Item
5. (T) Purchasing − Purchased = Checked − Purchasable = Checked − Default Buyer = Stock, Ms. Pat − Use Approved Supplier = Unchecked − List Price = 450 − Expense Account = 01-510-7530-0000-000
6. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 29
Enable the Item in an Inventory Organization
7. (M) Tools > Organization Assignment
8. Assign the item to the following inventory organizations: − M1 - Seattle Manufacturing
9. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 30
Create an Inventory Item
10. Open the Master Item window:
• (N) Items > Master Items − Item = XXMonitor − Description = Inventory Item
11. (T) Purchasing − Purchased = Checked − Purchasable = Checked − Use Approved Supplier = Unchecked − Default Buyer = Stock, Ms. Pat − List Price = 250
12. (T) Inventory − Inventory Item = Checked
13. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 31
Enable the Item in an Inventory Organization
14. (M) Tools > Organization Assignment
15. Assign the item to the following inventory organizations: − M1 - Seattle Manufacturing
16. Save
17. Close the Organization Assignment and the Master Item windows
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 32
Requisition your Expensed Item
18. Open the Requisitions window:
• (N) Requisitions > Requisitions − Description = XXPurchases
19. (T) Items − Item = XXSoftware − Quantity = 10 − Need-by = Today’s Date − Destination Type = Expense − Organization = Vision Operations − Location = V1- New York City − Supplier = Blank − Site = Blank
20. Save
Requisition your Inventory Item
21. (T) Items
22. (M) File > New − Item field on line 2 = XXMonitor − Quantity = 5
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 33
− Need-by = Today’s Date − Destination Type = Inventory − Organization = Seattle Manufacturing − Location = M1 – Seattle
23. Save
24. Record your requisition number
Approve the Requisition
25. Submit for Approval = Checked
26. OK
27. Close the Requisitions window.
Return your Requisition
28. Open the Find Requisition Lines window:
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 34
29. (N) AutoCreate
30. (B) Clear to clear existing query criteria. − Requisition = Your purchase requisition
31. (B) Find to open the AutoCreate Documents window.
32. Open the Return Requisitions window
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 35
33. (M) Tools > Return Requisition.
34. In the Reason field, enter a reason for returning the requisition.
Note: The return reason can be viewed in the Action History window.
35. (B) OK
Note: This action returns ALL requisition lines associated with this requisition unless they have been placed on a purchase document.
ReApprove your Requisition
36. Open the requisitions window
• (N) Requisitions > Requisition Summary
37. Enter your requisition number in the Requisition Number field
38. (B) Find
39. Note the approval status.
40. (M) View > Action History
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 36
41. Close the Action History window
42. (B) Open
43. (B) Approve − Submit for Approval = Checked − Uncheck all other options
44. (B) OK
45. (B) OK to close the note window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 37
Practice - AutoCreate a Purchase Order
Overview
In this practice, you will use the AutoCreate form to return a requisition.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Autocreate a Standard Purchase Order
1. Use the AutoCreate window to find the requisition you returned in the last practice. Use automatic creation mode to create a standard purchase order.
− Supplier = Advanced Network Devices − Site = SANTA CLARA
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 38
Solution - AutoCreate a Purchase Order
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Autocreate a Standard Purchase Order
1. Open the AutoCreate Documents window:
• (N) AutoCreate
2. (B) Clear
3. Enter the number of your purchase requisition in the Requisition field.
4. (B) Find to open the AutoCreate Documents window.
− Action = Create − Document Type = Standard PO − Grouping = Default
5. (M) Edit > Select All to select all lines
6. (B) Automatic to create a standard purchase order.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 39
− Supplier = Advanced Network Devices
7. (B) Create
8. Record the purchase order number.
9. (B) OK to close the note window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 40
10. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Automatic Document Creation Chapter 8 - Page 41
Summary
Summary
You should now be able to do the following:• Use the AutoCreate window to automate the
creation of purchase documents• Use the Create Releases program to generate
blanket purchase agreement releases• Understand how the PO Create Documents
workflow can automatically create purchase documents without buyer intervention
Oracle Internal & OAI Use Only
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 1
Receiving Chapter 9
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 2
Receiving
Receiving
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 3
Procure to Pay Lifecycle
Procure to Pay LifecycleRequisitions
Purchase Orders
Receiving
Reporting
Invoice/ Payment
Supplier Performance
Supplier management
RFQs/ Quotations
Catalog Content
Management
Sourcing
Ordering
Analysis
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 4
Objectives
Objectives
After completing this module, you should be able to do the following:• Describe the process of receiving goods• Understand receipt routing• Understand receipt processing methods• Create Standard, Express, and Cascade receipts• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections• Understand Pay on Receipt• Identify key reports• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 5
Agenda
Agenda
• Understand the Receiving process• Understand receipt routing• Understand receipt processing methods• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections and Pay on Receipt
• Identify key standard reports• Understand setup options• Understanding additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 6
Receiving
Receiving
Inventory
Order Entry
Internal shipment Inspect
Transfer
Shop floor
Inventory
Supplier
Shipment
Expense
Receive Deliver
Receiving
Receiving is a transaction that signals that the goods ordered on a purchase order have arrived. Purchasing lets you control the items you order through receiving, inspections, transfer and delivery. You can:
• Define receiving tolerances and rules at the organization supplier, item and order level, with the lowest level overriding previous levels.
• Use Express Receipt to receive an entire purchase order with a few keystrokes. • Use the Cascade function to distribute a given quantity of an item from a single supplier
across multiple shipments and distributions. • Record receipt of unordered items, research receipt and match the delivery to an existing
purchase order. • Record delivery of items from receiving or inspection locations to their final destination
and also record transfers of items to different locations for inspection. • Define which of your items require inspection. You can accept or reject items and
provide detailed information about your inspection results. • Record returns to suppliers and customers.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 7
• Correct receiving transaction errors. • Review transaction history.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 8
Overview of Receiving Locations
Overview of Receiving Locations
Ship-to location Receiving locations DestinationReceiving dock Areceives 20 items
Cold storage A20 items
Inspection station 120 items
Factory 1 receives10 items
Locator 110 items
Paulrequester10 items
Cold Sub A
Overview of Receiving Locations
You record inspections, deliveries and material movements within receiving and inspection by entering receiving transactions. The transactions provide a history that allows you to track an item from its source to its destination. Receiving Transactions allow you to:
• Transfer goods from one location to another • Document inspection results • Deliver goods to their required destination
It is the destination type that tells the system if the material is in the receiving space or its final destination.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 9
Agenda
Agenda
• Understand the Receiving process• Understand receipt routing• Understand receipt processing methods• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections and Pay on Receipt
• Identify key standard reports• Understand setup options• Understanding additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 10
Overview of Receipt Routing
Overview of Receipt Routing
Inspection
Standard Receipt
• Two Steps
• Goods are received and then delivered in two transactions.
• Three Steps
• Goods are received and then sent to Inspection.
• Goods are accepted or rejected.
• Third step either returns or delivered.
Direct Receipt
• One Step
• “Dock to Stock”
Overview of Receipt Routing
Direct Receipt One step. Goods are received and delivered in one step. Standard Receipt Two steps. Goods are received in one step and then delivered in a second. This allows for the time it takes goods to move though your facility from the receiving dock. Quantity on hand in subinventories is not updated until the delivery is completed. The quantity and cost is maintained in the inventory organizations inventory receiving account until the delivery is made. Inspection Required Three steps. Used for goods that require a more skilled person to do a careful review. Goods are received in one step. Inspection either accepts or rejects the goods. A quality score can be assigned at that time. Goods that are accepted are delivered in the third step, while goods that are rejected are returned to the supplier.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 11
Direct Delivery
Direct Delivery
Receive and Deliver
1
Shop floorInventory Expense
Direct Delivery
Direct delivery allows receipt of items directly to their final delivery destination. This is sometimes called a “dock to stock” transaction. The final destination type may be Expense, Inventory, or Shop Floor.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 12
Standard Receipt
Standard Receipt
1
2
Optional
Shop floorInventory Expense
Receive
Deliver
Standard Receipt
Shipments are received into a receiving location and then delivered to an interim or final destination. Goods are usually received and delivered in separate transactions. However, if the RCV: Allow Routing Override profile option is set to Yes, users can override the default and immediately deliver to the final destination. Setting the RCV: Allow Routing Override profile to No forces a two step delivery process.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 13
Inspection Required
Inspection Required
Shop floorInventory Expense
Receive1
Deliver3
Req’d Inspect2
Inspection Required
Inspection is a procedure you perform to ensure that items received confirm to your quality standards. Goods must be received and inspected before they can be delivered to their final destination. The QA: PO Inspection Profile option can be set to either Purchasing or Quality. If the profile option is set to Purchasing, a simple inspection window opens for recording inspection results. If the profile option is set to Quality and a quality inspection plan exists, the Quality form is opened and inspection results may be recorded based on a predefined inspection plan.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 14
Agenda
Agenda
• Understand the Receiving process• Understand receipt routing• Understand receipt processing methods• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections and Pay on Receipt
• Identify key standard reports• Understand setup options• Understanding additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 15
Receipt Processing Methods
Receipt Processing Methods
• Standard receipt• Express receipt• Cascade receipt• ASNs or ASBNs - iSupplier Portal• ASNs or ASBNs - e-Commerce Gateway• Receiving in iProcurement• Receiving open interface• Receiving notification
Receipt Processing Methods
Standard receipt One line at a time. Express receipt Multiple lines at a time. For example, an entire purchase order for a supplier. During express receiving you can always deselect items and change quantities prior to completing the process. Cascade receipt One receipt of multiple shipments of the same item. For example, same supplier and same item represented on multiple purchase documents. ASNs or ASBNs - iSupplier Portal You can give your supplier carefully limited access to allow them to enter ASNs or ASBNs. ASNs or ASBNs - e-Commerce Gateway Load ASNs or ASBNs using the e-Commerce Gateway. Receiving in iProcurement
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 16
You can give your employees limited ability to receive some types of items through a web browser. Receiving Open Interface Use barcoding software to scan receipts and create a text file that can be loaded into the Receiving Open Interface and processed by running the Receiving Transaction Processor. Receiving Notification The PO Confirm Receipts workflow can be scheduled to send notifications to requesters asking them to confirm receipts against expected receipts.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 17
Standard Receipt
Standard Receipt
• Find expected receipts• Enter quantities for received items
Qty Item
10 CM13139
5 CM12458
5 DC21322
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 18
Express Receipt
Express Receipt
• Find expected receipts• (B) Express fully receives all expected shipments• Enter Final Destination (Inventory, Expense or
Shop Floor
Qty Item
10 CM13139
5 CM12458
5 DC21322
Express Receipt
The express function is a quick method of entering receipts and receiving transactions. This function is available if you have specified or inferred a source document. With a few keystrokes you can receive the entire open order quantity of a purchase order. When you search for expected receipts, either specify a single supplier or use search criteria that will derive a single supplier.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 19
Cascade Receipt
Cascade Receipt
• Find expected receipts• (B) Cascade fully receives all expected shipments• Enter quantity to cascade
Qty Item
10 CM13139
2 CM13139
0 CM13139
Qty expected
10
5
5
Cascade qty = 12
Cascade Receipt
The cascade function facilitates the distribution of a given quantity of an item from a single supplier across multiple shipments and distributions. This function is available if you have specified or inferred a source (a specific supplier or customer) and an item when you search for expected receipts.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 20
ASNs and ASBNs
ASNs and ASBNs
e-Commerce Gateway
iSupplier Portal
Openinterface
Receiving Transaction Processor
Confirm Receipts
Enter1
Process2
Confirm3
ASNs and ASBNs
Enter (1) Enter ASNs and ASBNs using either iSupplier Portal or e-Commerce Gateway. Process (2) Run the Receiving Transaction Manager to validate data in the Receiving Open Interface tables. Confirm (3) Use the Enter Receipts window to confirm the actual receipt of goods when it arrives.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 21
Receiving in iProcurement
Receiving in iProcurement
Receive1
Confirm2
Receiving in iProcurement
Receive (1) You receive the actual goods. Confirm (2) You can confirm physical receipt of goods using iProcurement as well as the Enter Receipts form in Purchasing, provided you are using a receipt routing of Direct Delivery. You will not find expected receipts if the receipt routing is set to Standard Receipt or Inspection Required. You can schedule the Confirm Receipts Workflow Select Orders process to run at regular intervals. The Confirm Receipts Workflow Select Orders process runs the PO Confirm Receipts workflow. The Confirm Receipts workflow sends notifications through the Web, e-mail, or Notifications Summary window to requesters or buyers who create requisitions through Purchasing or iProcurement. It lets people know they should have received an item. The Confirm Receipts workflow sends notifications for items with a Destination or Deliver-To Type of Expense, a Receipt Routing of of Direct Delivery, and a Need-By date that is equal to or later than today’s date.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 22
Receiving Open Interface
Receiving Open Interface
Flat File
Openinterface
Receiving Transaction Processor
Confirm Receipts
Load1
Process2
Confirm3
Receiving Open Interface
Load (1) Load the Receiving Open Interface with data using SQL*Loader or another utility. You can use barcoding software to create the text file as items are scanned to help automate the receiving process. Process (2) Run the Receiving Transaction Manager to validate data in the Receiving Open Interface tables. Confirm (3) Use the Enter Receipts window to confirm the actual receipt of goods when it arrives.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 23
Finding Expected Receipts
Finding Expected Receipts
Find expected receipts2
4 Chose processing method
3 Input receipt header
5 Input receipt details
6 Save
Choose the organization1
Finding Expected Receipts
Purchasing Responsibility (N) Receiving > Receipts Choose the organization (1) When you first access the Receipts window, you will be forced to choose an inventory organization from the list of values if you can process receipts for more than one. You can change the organization manually if you have access to the Change Organization window. Although it is not always the case, you can think of an inventory organization as a warehouse. When you write purchase orders, for example, you specify goods to be shipped to specific inventory organizations. You will only be able to view expected receipts (scheduled shipments for a purchase order line item) for the inventory organization you choose. Use the Organization Access form to limit access to the list of inventory organizations for a specific responsibility. Find expected receipts (2) Expected Receipts can and do come from different sources because they are based on source documents like purchase order scheduled shipments to suppliers, Internal Sales Orders resulting from Internal requisitions and customer returns (processed in Order Management).
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 24
When no source document can be found, the order can be processed as an Unordered receipt provided the Allow Unordered Receipts Receiving option is enabled on the scheduled shipment. Use the Find Expected Receipts window to find source documents. You can enter as many criteria as desired to search for expected receipts. The more information you include, the more restrictive the search is. The focus of this course is those receipts that are expected for a supplier as a result of a purchase order or release that was issued. Other sources of goods to be received are from either internal inventory organizations, or from customers. Input receipt header (3) Input receipt header details like freight carrier, comments and packing slip. Choose processing mode (4) Choose the most efficient method to process the invoice. Choose to process the receipt as a standard, express or cascade receipt. Input receipt details (5) Input receipt details like quantity, unit of measure, location and subinventory (if necessary). The method of receipt routing determines if the destination defaults to Receiving or a final destination like Inventory, Expense or Shop Floor. You can override this option (for example, when using Standard Delivery, the destination will default to Receiving but you override it to a final destination) only if the RCV: Allow Routing Override profile option is set to Yes. Also the Enforce Ship-To Receiving option determines whether the receiving location must be the same as the Ship-To location. The Enforce Ship-To option can be set to allow the receipt, allow the receipt but warn the receipt processor or not allow the receipt to be processed. Save (6) Save the receipt. Depending on the setting of the RCV: Processing Mode profile option, the receipt will be processed immediately or submitted as a batch or deferred process.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 25
Receipt Header
Receipt Header
• Receipt Number• Receiver Name• Date• Freight Carrier• Packing Slip/Air Bill• Number or Containers• Comments
HEADER
LINE
Receipt
Receipt Header
Receipt Number Enter a unique receipt number. If automatic receipt number generation is active, the system will assign the next available receipt number. Numbering options are set one time for each inventory organization. You can also add receiving transactions existing receipts. Receiver Name The receiver name will default in from the user id. You can override the default with the name of another receiver. Date Today’s date will default in from the system date. You can backdate a receipt if necessary, but the accounting period that the receipt date fall into must be open to do so. Freight Carrier You may enter the carrier who delivered the goods using the list of values. This information will default if an ASN was sent. Packing Slip / Air Bill Number
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 26
You may enter the packing slip or air bill number that the goods came in on. This information will default if an ASN was sent. Number of Containers You may enter the total number of containers that made up this shipment. Comments The receiver may enter any comments here. An example might be that the box was wet, etc.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 27
Receipt Line
Receipt Line
• Quantity• Unit of Measure• Item• Description• Destination Type• Order Number• Receipt Type• Requestor• Subinventory• Note to Receiver
HEADER
LINE
Receipt
Receipt Line
Quantity Enter the quantity actually received. If you have allowed blind receiving in the inventory organization’s receiving options, this field will be empty. Unit of Measure The unit of measure for the receipt will default here. Item The system item number (if one exists) will display here. Description The description for the item will display here. Destination Type The final destination of the receipt (Expense, Inventory or Shop Floor) or Receiving is displayed. For a direct receipt the destination will be either: inventory, expense or outside processing. A standard or inspection receipt will have a destination type of receiving. Order Number
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 28
The order number will default (purchase order number or sales order number). Receipt Type The receipt type for this order will default here. Either direct, standard or inspection. Requestor If the destination type is expense or inventory, and the order was created from a purchase requisition, the name of the requestor will default. Subinventory If the destination type is inventory this field is required. If the sub inventory was specified on the requisition or purchase order, it will default here. If no value defaults, the receiver will have to fill in which subinventory the goods are to be delivered to. Note to Receiver If a note to the receiver was entered either on the requisition or the purchase order, it will display here.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 29
Guided Demonstration - Create a Standard Purchase Order (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Purchase Orders > Purchase Orders
Create a purchase order that will be used for receiving.
Create a Standard Purchase Order
1. Supplier = XXIBM Corporation
2. Type = Standard Purchase Order
3. Ship-to = M1-Seattle
4. Bill-to = V1-New York
5. Description = XXComputer Equipment
Enter Terms and Conditions
6. Navigate to the Terms and Conditions window:
7. (B) Terms
8. Payment = Immediate
9. Pay On = Blank
10. Save
11. Close the Terms and Conditions window
12. (T) Items
13. Enter the items according to the following table:
Num Item Quantity Price Promised
1 XXSoftware 10 450 Blank
2 XXMonitor 10 250 Blank
3 XXComputerPC 2 1200 Today + 7 days
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 30
Note: Need-by and Promised-by are only required for planned items. However, they are necessary for some of the supplier performance reports.
14. Save
Enter Shipments
15. Place cursor in the Description field for the XXSoftware item
16. (B) Shipments
17. Enter the following shipments for the XXSoftware item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
18. Save
19. (T) More
20. Match Approval Level = 2-way
21. Invoice Match Option = PO
22. Save
23. Close the Shipments window to return to the Purchase Orders window.
24. Place cursor in the Description field for the XXMonitor item.
25. Navigate to the Shipments window:
26. (B) Shipments
27. Enter the following shipments for the XXMonitor item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 31
28. Save
29. (T) More
30. Match Approval Level = 3-way
31. Invoice Match Option = PO
32. Save
33. Close the Shipments window to return to the Purchase Orders window.
34. Record your purchase order number.
Complete the Internal Distributions for the Expensed item
35. Click in the Description field for the XXSoftware item.
36. (B) Shipments
37. (B) Distributions
38. Complete the internal distribution according to the following table:
Num Type Requestor Quantity Charge
1 Expense Smith, Mr. Jonathon 4 01-520-7530-0000-000
39. Save
40. Close the Distributions window.
41. Repeat the steps above until ALL shipments have a completed internal distribution.
42. Save
Complete the Internal Distributions for the Inventory item
43. Place cursor in the Description field for the XXMonitor item.
44. (B) Shipments
45. (B) Distributions
46. Complete the internal distribution according to the following table:
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 32
Num Type Requestor Subinventory Quantity
1 Inventory Smith, Mr. Jonathon Stores 4
Note: The type of the item is Inventory. For Inventory items, the charge account cannot be changed. Account generator builds it based on the accounting in the inventory organization! If the account combinations are not being built the way you need them to be, you can modify the workflows to build them the way you need them to be built.
47. Save
48. Close the Distributions window.
49. Repeat the steps above until ALL shipments have a completed internal distribution.
50. Save
51. Close the Distributions and Shipments windows.
Complete the Internal Distributions for the Asset
52. Place cursor in the Description field for the XXComputerPC item.
53. (B) Shipments
54. (B) Distributions
55. Complete the internal distribution according to the following table:
Num Type Requestor Quantity Charge
1 Expense Smith, Mr. Jonathon 4 01-000-1570-0000-000
Approve the Document
56. Record your purchase order number.
57. (B) Approve
58. Submit for Approval = Checked
59. Uncheck all other options
60. (B) OK in the Approve Document window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 33
61. (B) OK to close the note window.
Verify Distribution Information
62. Query up your PO
63. Verify that each distribution for XXMonitor has requestor and subinventory information recorded
64. Verify that each distribution for XXSoftware has requestor information recorded.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 34
Guided Demonstration - Create a Standard Receipt (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Receipts (M1 - Seattle Manufacturing)
Find Expected Receipts
1. Purchase Order = Your Purchase Order from #1.
2. Supplier = XXIBM Corporation
3. Item = XXComputerPC
4. (B) Find
Fill in Receipt Header Details
5. Packing Slip = PS-XX
6. Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Process a Standard Receipt
7. (M) Window > Receipts (M1)
8. Select the checkbox to the left of the Quantity field
9. Quantity = 2
10. Destination Type = Expense
11. Location = M1-Seattle
12. Requestor = Smith, Mr. Jonathan
13. Save
14. (B) Header
15. Record your receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 35
Note: You can use iSupplier Portal to allow your suppliers to record ASNs. Deliveries must still be processed using this window, but much of the information will already be recorded and as a result, receipt processing cost and time may be lower.
Note: You can only override the default destination type if the RCV: Allow Routing Override is set to Yes. Also, the Enforce Ship-To option will determine if you can override the Ship-To location on the expected receipt. You can set this Action for this option to Warning, Reject or None. Set the RCV: Print Receipt Traveler to Yes in order to have a Receipt Traveller printed automatically. The RCV: Processing Mode profile option determines how receipts are processed:
Setting Meaning
Online The user will not be able to perform any other application activities until the process completes.
Immediate The window will start running Receiving Transaction Processor as a background process. The system will not hold the screen and the user can do something else..
Batch Control is returned to the User immediately so other application activities may be performed. Running Concurrent Program Receiving Transaction Processor (RVCTP) will process the transaction. Typically, you will run this program periodically based on processing and system requirements.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 36
Guided Demonstration - Create an Express Receipt (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Receipts (M1 - Seattle Manufacturing)
Find Expected Receipts
1. Purchase Order = Your Purchase Order from #1.
2. Supplier = XXIBM Corporation
3. Item = XXSoftware
4. (B) Find
Note: In order to process an express receipt, all expected receipts queried must be from the same supplier!
Record Receipt Header Details
5. Packing Slip = PS-XX
6. Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Express Receipt
7. (M) Window > Receipts (M1)
8. (B) Express
9. Destination Type = Final Destination
10. (B) OK
11. Save
12. (B) Header
13. Record your receipt number.
Note: If the Destination Type is Final Destination, to process the receipt as an express receipt, the requestor field must have been filled out on the purchase order or release!
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 37
Review Receiving Transactions
14. Open the Find Receiving Transactions window:
15. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
16. In the Receipt field, enter the receipt number.
17. (B) Find
18. (B) Transactions to open the Receipt Transaction Summary window.
19. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 38
Guided Demonstration - Create a Cascade Receipt (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Receipts (M1 - Seattle Manufacturing)
Find Expected Receipts
1. Purchase Order = Your Purchase Order from #1.
2. Supplier = XXIBM Corporation
3. Item = XXMonitor
4. (B) Find
Note: In order to process a cascade receipt, you must query expected receipts for a specific supplier and item.
Record Receipt Header Details
5. Packing Slip = PS-XX
6. Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Cascade Receipt
7. (M) Window > Receipts (M1)
8. (B) Cascade to create a Cascade receipt.
9. Cascade Quantity = 6
10. Unit of Measure = Each
11. (B) OK
12. Note that the 6 items are applied to the expected receipt.
13. Save
14. (B) Header
15. Record your receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 39
Note: Because the routing type was Standard Routing, these inventory items will show a destination type of Receiving. The items are delivered to inventory in a subsequent step.
Complete the Delivery for a Line of the Cascade Receipt (we will inspect the other later)
16. Open the Receiving Transactions window:
17. (N) Receiving > Receiving Transactions (M1 - Seattle Manufacturing)
18. In the Receipt field, enter the number of the Cascade Receipt.
19. (B) Find
20. (T) Order Information
21. Select PO Line 2, Shipment 2 (quantity of 2 available to deliver) by selecting the checkbox to the left of the Quantity field. We will inspect the other item in a later lab.
Note: If you did not fill in requestor and subinventory information on the purchase order, you will need to do that now!
22. Save
23. Close the Receiving Transactions window.
Review Receiving Transactions
24. Open the Find Receiving Transactions window:
25. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
26. In the Receipt field, enter the receipt number.
27. (B) Find
28. (B) Transactions to open the Receipt Transaction Summary window.
29. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 40
Practice - Create Items
Overview
In this practice you will create items that you will write a purchase order for and finally receive in subsequent practices.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create an Expense Item
2. Create an item that will be expensed. Use the following information:
3. Open the Master Item window − Item = XXSoftware − Description = Expensed Item − Primary Unit of Measure = Each − Item Status field = Active − Purchased = Checked − Purchasable = Checked − Buyer = Stock, Ms. Pat − List Price = 450 − Expense Account = 01-510-7530-0000-000
4. In the Receipt Date Control area’s Action field, use the list of values to select Warning. − Days Early = 5 − Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing = Standard − Enforce Ship-To = Warning
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 41
Enable the Item in an Inventory Organization
Assign the item to the following inventory organizations:
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
Create an Inventory Item − Item = XXMonitor − Description = Inventory Item − Primary Unit of Measure = Each − Item Status = Active − Inventory Item = Checked − Purchased = Checked − Purchasable = Checked − Use Approved Supplier = Unchecked − Buyer = Stock, Ms. Pat − List Price = 250
5. In the Receipt Date Controls area’s Action field, use the list of values to select Warning. − Days Early = 5 − Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing field = Standard
Enable the Item in an Inventory Organization
Assign the item to the following inventory organizations:
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
Create an Item that will be Capitalized and Depreciated after Purchase − Item = XXComputerPC
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 42
− Description = High Speed Computer − Primary Unit of Measure = Each − Item Status field = Active − Purchased = Checked − Purchasable = Checked − Use Approved Supplier = Unchecked − Default Buyer = Stock, Ms. Pat − List Price = 1200 − Asset Category = COMPUTER-PC
In the Receipt Date Control area’s Action field, use the list of values to select Warning. − Days Early and Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing = Inspection
Enable the Item in an Inventory Organization
Assign the item to the following inventory organizations:
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 43
Solution - Create Items
Log on to the System − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create an Expense Item
1. Choose the organization:
2. (N) Change Organization
3. From the list of values, choose M1-Seattle Manufacturing and click OK
4. (N) Items > Master Items − Item = XXSoftware − Description = Expensed Item − Primary Unit of Measure = Each − Item Status field = Active
5. (T) Purchasing − Purchased = Checked − Purchasable = Checked − Buyer = Stock, Ms. Pat − Use Approved Supplier = Unchecked − List Price = 450 − Expense Account = 01-510-7530-0000-000
6. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 44
7. (T) Receiving
8. In the Receipt Date Control area’s Action field, use the list of values to select Warning. − Days Early = 5 − Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing = Standard − Enforce Ship-To = Warning
9. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 45
Enable the Item in an Inventory Organization
10. (M) Tools > Organization Assignment
11. Assign the item to the following inventory organizations:
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
12. Save
13. Close the Organization Assignment and Master Item windows.
Create an Inventory Item
14. (N) Items > Master Items − Item = XXMonitor − Description = Inventory Item
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 46
15. (T) Main − Primary Unit of Measure = Each − Item Status = Active
16. (T) Inventory − Inventory Item = Checked
17. Save
18. (T) Purchasing − Purchased = Checked − Purchasable = Checked − Use Approved Supplier = Unchecked − Buyer = Stock, Ms. Pat − List Price = 250
19. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 47
20. (T) Receiving
21. In the Receipt Date Controls area’s Action field, use the list of values to select Warning. − Days Early = 5 − Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing field = Standard
22. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 48
Enable the Item in an Inventory Organization
23. (M) Tools > Organization Assignment
Assign the item to the following inventory organizations:
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
24. Save
25. Close the Organization Assignment and the Master Item windows.
Create an Item that will be Capitalized and Depreciated after Purchase
26. (N) Items > Master Items − Item = XXComputerPC − Description = High Speed Computer − Primary Unit of Measure = Each
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 49
− Item Status field = Active
27. (T) Purchasing − Purchased = Checked − Purchasable = Checked − Use Approved Supplier = Unchecked − Default Buyer = Stock, Ms. Pat − List Price = 1200 − Asset Category = COMPUTER-PC
28. Save
29. (T) Receiving
30. In the Receipt Date Control area’s Action field, use the list of values to select Warning. − Days Early and Days Late = 5 − Allow Substitute Receipts = Yes − Receipt Routing = Inspection
31. Save
Enable the Item in an Inventory Organization
Enable the item in the following inventory organizations:
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 50
Org Name Assigned
M1 Seattle Manufacturing Checked
M2 Boston Manufacturing Checked
M3 Dallas Manufacturing Checked
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 51
Practice - Create a Standard Purchase Order
Overview
In this practice you will use the items you set up to create a standard purchase order.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create a Standard Purchase Order
2. Open the Purchase Orders window − Type = Standard Purchase Order − Supplier = Advanced Network Devices − Site = SANTA CLARA − Description = XXComputer Hardware
Enter Terms and Conditions − Payment = Immediate − Pay On = Blank
Enter Items
3. Enter the items according to the following table:
Num Item Quantity Price Promised
1 XXSoftware 10 450 Blank
2 XXMonitor 10 250 Blank
3 XXComputerPC 2 1200 Today + 7 days
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 52
Enter Shipments
4. Enter the following shipments for the XXSoftware item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
− Match Approval Level = 2-way − Invoice Match Option = PO
5. Enter the following shipments for the XXMonitor item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
− Match Approval Level = 3-way − Invoice Match Option = PO
6. Record your purchase order number.
Complete the Internal Distributions for the Expensed item
7. Complete the internal distribution according to the following table:
Num Type Requestor Quantity Charge
1 Expense Smith, Mr. Jonathon 4 01-520-7530-0000-000
8. Repeat the steps above until ALL shipments have a completed internal distribution.
Complete the Internal Distributions for the Inventory item
9. Complete the internal distribution according to the following table:
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 53
Num Type Requestor Subinventory Quantity
1 Inventory Smith, Mr. Jonathon Stores 4
Note: The type of the item is Inventory. For Inventory items, the charge account cannot be changed. Account generator builds it based on the accounts in the inventory organization! If the accounts are not being built the way you need them to be, you can modify the account generator to build them the way you need them to be built.
10. Repeat the steps above until ALL shipments have a completed internal distribution.
Approve the Document
11. Record your purchase order number.
Verify Distribution Information
12. Verify that each distribution for XXSoftware has requestor information recorded.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 54
Solution - Create a Standard Purchase Order
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Create a Standard Purchase Order
2. Open the Purchase Orders window:
• (N) Purchase Orders > Purchase Orders − Type = Standard Purchase Order − Supplier = Advanced Network Devices − Site = SANTA CLARA − Ship-to = M1-Seattle − Bill-to = V1-New York − Description = XXComputer Hardware
Enter Terms and Conditions
3. Navigate to the Terms and Conditions window:
• (B) Terms − Payment = Immediate − Pay On = Blank
4. Save
5. Close the Terms and Conditions window to return to the Purchase Orders window.
Enter Items
6. (T) Items
7. Enter the items according to the following table:
Num Item Quantity Price Promised
1 XXSoftware 10 450 Blank
2 XXMonitor 10 250 Blank
3 XXComputerPC 2 1200 Today + 7 days
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 55
Note: Need-by and Promised-by are only required for planned items. However, they are necessary for some of the supplier performance reports.
8. Save
Enter Shipments
9. Place cursor in the Description field for the XXSoftware item
10. Navigate to the Shipments window:
• (B) Shipments
11. Enter the following shipments for the XXSoftware item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 56
12. Save
13. (T) More − Match Approval Level = 2-way − Invoice Match Option = PO
14. Save
15. Close the Shipments window to return to the Purchase Orders window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 57
16. Place cursor in the Description field for the XXMonitor item.
17. Navigate to the Shipments window:
• (B) Shipments
18. Enter the following shipments for the XXMonitor item.
Num Org Ship-To UOM Quantity Promised
1 M1 M1-Seattle Each 4 In 1 month
2 M1 M1-Seattle Each 4 In 2 months
3 M1 M1-Seattle Each 2 In 3 months
19. Save
20. (T) More − Match Approval Level = 3-way − Invoice Match Option = PO
21. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 58
22. Close the Shipments window to return to the Purchase Orders window.
23. Record your purchase order number.
Complete the Internal Distributions for the Expensed item
24. Click in the Description field for the XXSoftware item.
25. (B) Shipments
26. (B) Distributions
27. Complete the internal distribution according to the following table:
Num Type Requestor Quantity Charge
1 Expense Smith, Mr. Jonathon 4 01-520-7530-0000-000
28. Save
29. Close the Distributions window.
30. Repeat the steps above until ALL shipments have a completed internal distribution.
31. Save
Complete the Internal Distributions for the Inventory item
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 59
32. Place cursor in the Description field for the XXMonitor item.
33. (B) Shipments
34. (B) Distributions
35. Complete the internal distribution according to the following table:
Num Type Requestor Subinventory Quantity
1 Inventory Smith, Mr. Jonathon Stores 4
Note: The type of the item is Inventory. For Inventory items, the charge account cannot be changed. Account generator builds it based on the accounts in the inventory organization! If the accounts are not being built the way you need them to be, you can modify the account generator to build them the way you need them to be built.
36. Save
37. Close the Distributions window.
38. Repeat the steps above until ALL shipments have a completed internal distribution.
39. Save
40. Close the Distributions and Shipments windows.
Approve the Document
41. Record your purchase order number.
42. (B) Approve − Submit for Approval = Checked − Uncheck all other options
43. (B) OK in the Approve Document window.
44. (B) OK to close the note window.
Verify Distribution Information
45. Query up your PO
46. Verify that each distribution for XXMonitor has requestor and subinventory information recorded
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 60
47. Verify that each distribution for XXSoftware has requestor information recorded.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 61
Practice - Create a Standard Receipt
Overview
In this practice you will create a standard receipt against the purchase order you created in the prior practice.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
Open the Find Expected Receipts window: − Purchase Order = Your Purchase Order from Lab #1. − Supplier = Advanced Network Devices − Item = XXComputerPC
Fill in Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Process a Standard Receipt − Quantity = 2 − Destination Type = Expense − Location = M1-Seattle − Requestor = Smith, Mr. Jonathan
14. Record your receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 62
Note: You can use iSupplier Portal to allow your suppliers to record ASNs. Deliveries must still be processed using this window, but much of the information will already be recorded and as a result, receipt processing cost and time will be lower.
Note: You can only override the default destination type if the RCV: Allow Routing Override is set to Yes.
Note: The RCV: Processing Mode profile option determines how receipts are processed:
Setting Meaning
Online The user will not be able to perform any other application activities until the process completes.
Immediate The window will start running Receiving Transaction Processor as a background process. The system will not hold the screen and the user can do something else..
Batch Control is returned to the User immediately so other application activities may be performed. The transaction will be processed by running Concurrent Program Receiving Transaction Processor (RVCTP). Typically, customers will run this program periodically based on their processing and system requirements.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 63
Solution - Create a Standard Receipt
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window:
• (N) Receiving > Receipts (M1 - Seattle Manufacturing) − Purchase Order = Your Purchase Order from Lab #1. − Supplier = Advanced Network Devices − Item = XXComputerPC
3. (B) Find
Fill in Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Process a Standard Receipt
4. (M) Window > Receipts (M1)
5. Select the checkbox to the left of the Quantity field − Quantity = 2 − Destination Type = Expense − Location = M1-Seattle − Requestor = Smith, Mr. Jonathan
6. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 64
7. (B) Header
8. Record your receipt number.
Note: You can only override the default destination type if the RCV: Allow Routing Override is set to Yes.
Note: You can use iSupplier Portal to allow your suppliers to record ASNs. Deliveries must still be processed using this window, but much of the information will already be recorded and as a result, receipt processing cost and time will be lower.
Note: The RCV: Processing Mode profile option determines how receipts are processed:
Setting Meaning
Online The user will not be able to perform any other application activities until the process completes.
Immediate The window will start running Receiving Transaction Processor as a background process. The system will not hold the screen and the user can do something else..
Batch Control is returned to the User immediately so other application activities may be performed. The transaction will be processed by running Concurrent Program Receiving Transaction Processor (RVCTP). Typically, customers will run this program periodically based on their processing and system requirements.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 65
Practice - Create an Express Receipt
Overview
In this practice you will create an express receipt against the purchase order you created
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window: − Purchase Order = Your Purchase Order from Lab #1 − Supplier = Advanced Network Devices − Item = XXSoftware
Note: In order to process an express receipt, all expected receipts queried must be from the same supplier!
Record Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Express Receipt − Destination Type = Final Destination
3. Record your receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 66
Note: If the Destination Type is Final Destination, to process the receipt as an express receipt, the requestor field must have been filled out on the purchase order or release!
Review Receiving Transactions
4. Open the Find Receiving Transactions window:
5. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 67
Solution - Create an Express Receipt
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. (N) Receiving > Receipts (M1 - Seattle Manufacturing) − Purchase Order = Your Purchase Order from Lab #1 − Supplier = Advanced Network Devices − Item = XXSoftware
3. (B) Find
Note: In order to process an express receipt, all expected receipts queried must be from the same supplier!
Record Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Express Receipt
4. (M) Window > Receipts (M1)
5. (B) Express to create an Express receipt. − Destination Type = Final Destination
6. (B) OK
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 68
7. Save
8. (B) Header
9. Record your receipt number.
Note: If the Destination Type is Final Destination, to process the receipt as an express receipt, the requestor field must have been filled out on the purchase order or release!
Review Receiving Transactions
10. Open the Find Receiving Transactions window:
11. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
12. In the Receipt field, enter the receipt number.
13. (B) Find
14. (B) Transactions to open the Receipt Transaction Summary window.
15. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 69
Practice - Create a Cascade Receipt
Overview
In this practice you will create an cascade receipt against the purchase order you created.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window: − Purchase Order = Your Purchase Order from Lab #1. − Supplier = Advanced Network Devices − Item = XXMonitor
Note: In order to process a cascade receipt, you must query expected receipts for a specific supplier and item.
Record Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Cascade Receipt − Cascade Quantity = 6 − Unit of Measure = Each
Note: Because the routing type was Standard Routing, these inventory items will show a destination type of Receiving. The items are delivered to inventory in a subsequent step.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 70
Complete the Delivery for the a Line of the Cascade Receipt (we will inspect the other later)
3. Open the Receiving Transactions window:
4. In the Receipt field, enter the number of the Cascade Receipt.
5. Select PO Line 2, Shipment 2 (qty of 2 available to deliver) by selecting the checkbox to the left of the Quantity field. We will inspect the other item in a later lab.
Note: If you did not fill in requestor and subinventory information on the purchase order, you will need to do that now!
Review Receiving Transactions
6. Open the Find Receiving Transactions window.
7. In the Receipt field, enter the receipt number.
8. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 71
Solution - Create a Cascade Receipt
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window:
• (N) Receiving > Receipts (M1 - Seattle Manufacturing) − Purchase Order = Your Purchase Order from Lab #1. − Supplier = Advanced Network Devices − Item = XXMonitor
3. (B) Find
Note: In order to process a cascade receipt, you must query expected receipts for a specific supplier and item.
Record Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Cascade Receipt
4. (M) Window > Receipts (M1)
5. (B) Cascade to create a Cascade receipt. − Cascade Quantity = 6 − Unit of Measure = Each
6. (B) OK
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 72
7. Note that the 6 items are applied to the expected receipt.
8. Save
9. (B) Header
10. Record your receipt number.
Note: Because the routing type was Standard Routing, these inventory items will show a destination type of Receiving. The items are delivered to inventory in a subsequent step.
Complete the Delivery for the a Line of the Cascade Receipt (we will inspect the other later)
11. Open the Receiving Transactions window:
• (N) Receiving > Receiving Transactions (M1 - Seattle Manufacturing)
12. In the Receipt field, enter the number of the Cascade Receipt.
13. (B) Find
14. (T) Order Information
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 73
15. Select PO Line 2, Shipment 2 (qty of 2 available to deliver) by selecting the checkbox to the left of the Quantity field. We will inspect the other item in a later lab.
Note: If you did not fill in requestor and subinventory information on the purchase order, you will need to do that now!
16. Save
17. Close the Receiving Transactions window.
Review Receiving Transactions
18. Open the Find Receiving Transactions window:
• (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
19. In the Receipt field, enter the receipt number.
20. (B) Find
21. (B) Transactions to open the Receipt Transaction Summary window.
22. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 74
Control the Receiving Transaction Processor
Control the Receiving Transaction Processor
• Online• Immediate• Batch
Control the Receiving Transaction Processor
The setting of the RCV: Processing Mode profile determines the processing mode used after you save your work for receiving transactions. The profile option can have one of three possible settings: Online The Receiving Transaction Processor is called directly to process the receipt (no concurrent request is submitted). The form is not immediately returned to user control, so the user will not be able to perform any other application activities until the process completes. Form response time is the slowest of the three options, but errors processing the receipt become obvious immediately. Immediate The transaction goes to the interface table, and the Receiving Transaction Processor is called for the group of transactions that you entered since you last saved your work. The form will start running the Receiving Transaction Processor as a background process. Control is returned to the user immediately so other application activities may be performed. Form response time is fast, but a concurrent process is run each time you process a receipt. You must occasionally check the concurrent manager to ensure the concurrent request completes
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 75
without errors. If an error occurs, the problem must be fixed. You use the Transaction Status Summary form to delete errored transactions and force them to reprocess. This is important especially for transactions destined for Inventory or Shop Floor. Until the receipt processes successfully, no receipt accruals are generated and sent to the general ledger. If the problem is not reconciled by period end, accruals will be out of balance and understated in General Ledger. Batch The transaction goes to the interface table, where it will be picked up the next time the Receiving Transaction Processor runs. Control is returned to the user immediately so other application activities may be performed. Form response time is fast. The transaction will be processed by running the Receiving Transaction Processor process. This program must be scheduled to run periodically. The longer the interval, the more data the program will process each time it runs. Errors are handled the same way they are handled when the mode is set to Immediate. Typically, customers will run this program periodically based on their processing and system requirements. For example, you may elect to run the process at a time when there is relatively low database activity to help balance the load on system resources. Using this method, receipt accruals are not processed until the concurrent process completes successfully. Also, inventory value and on-hand quantities are not updated until the concurrent request completes.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 76
Receiving Tolerances
Receiving Tolerances
• You can set receiving tolerances for quantities and for on-time delivery.
• You can determine what actions occur when the receipt is outside of the tolerance– None– Reject– Warning
• You can define receiving tolerances at the organization, item, and/or order level.
Receiving Tolerances
You can define days early and late that you will accept a shipment. You can also define what, if any percentage above the quantity ordered you will receive. You have three actions you can place to enforce those tolerances:
• None - no action is taken • Reject - The receiver is unable to receive the shipment. The buyer will have to either
adjust the tolerances on the PO, or change either the quantity and need by date on the PO. • Warning - The receiver will see a pop up window if a tolerance is exceeded. The
receiver has the option of accepting the shipment or turning the shipment away.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 77
Control Numbers
Control Numbers
Purchasing uses three types of inventory control numbers:• Lot Numbers• Serial Numbers• Stock Locators
Control Numbers
Lot Numbers A lot number is a unique number assigned to a certain batch or process run of a product. You can assign expiration dates for each lot number. Lot number control is an item attribute that can be found and set by choosing the Inventory tab in either the Master Items or Organization Items windows. Serial Numbers A serial number is a unique number assigned to an individual item. When an item under serial number control is received, the user performing the transaction will be forced to enter a unique serial number for each item. Serial number control is an attribute on the inventory tab of the item (either in Master Items or Organization Items). Stock Locators You use locators to identify physical areas where you store inventory items. Item quantities can be tracked by locator. Items can also be restricted to specific locators. An example of a stock locator might be “Row, Rack, Bin” number. You can require Stock Locator control at the inventory organization level, the subinventory level, or the item level.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 78
Agenda
Agenda
• Understand the Receiving process• Understand receipt routing• Understand receipt processing methods• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections and Pay on Receipt
• Identify key standard reports• Understand setup options• Understanding additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 79
Substitute Receipts
Substitute Receipts
Receive item Binstead of A
Is B a validsubstitute?
NoReturn
Delivery
Yes
Substitute Receipts
When entering items in the Item Master, you have the ability to identify parts that can be substituted for each other. In Purchasing, you can receive predefined substitute items when you allow suppliers to ship alternatives to the item you order. Within the group of planning applications (MRP, DRP, ASCP), only ASCP can be set up to recognize substitute part numbers.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 80
Unordered Receipts
Unordered Receipts
Unorderedreceipt
Delivery Match to
PO?
Yes
NoRequires matching
or return
Unordered Receipts
You can receive items from a supplier when you do not have or do not know a corresponding purchase order number. These items are tracked on the system while you wait for a buyer to specify which purchase order should be used, or if the items are to be returned to the supplier.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 81
Overview of Returns and Corrections
Overview of Returns and Corrections
Receiving Return delivery
RMA, reason code (optional)Return to supplier
Identify itemfor return
Receiving
Identify error in receiving
Correct as many transactions as necessary
Returns
Corrections
Overview of Returns and Corrections
Returns You can return delivered items to receiving and return received or delivered externally sourced items to the supplier if the purchase order has neither been canceled nor finally closed. You can also return to the supplier unordered receipts that have not been matched. Optionally specify additional return information such as a Reason Code and RMA (Return Material Authorization) number. Corrections Purchasing provides the capability to correct any receiving transaction, except another correction and a return to a receiving transaction. Each transaction is done individually correcting the previous transactions until all applicable transactions are corrected.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 82
Entering Returns
Entering Returns
Return from inventory
Return from receiving
To the supplier or customer
Entering Returns
Use the Receiving Returns window to enter returns against receipts, deliveries, transfers, acceptances, and rejections. You may enter an RMA number from your supplier, as well as specify any user defined return reason. You can return delivered items to a receiving location when they are routed to the wrong destination, require inspection, or require a return to a supplier or a customer in a later transaction. When you perform a Return to Supplier transaction, Purchasing reopens the associated purchase order for the return quantity by reducing the original receipt quantity. You cannot perform a Return to Supplier transaction against a Finally Closed or Cancelled purchase order. When you perform a Return to Supplier transaction, Purchasing automatically creates both a Return to Receiving and a Return to Supplier transaction.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 83
Entering Corrections
Entering Corrections
Item Costs Quantity on Hand
Entering Corrections
Corrections are entered by using the adjustment quantity, either positive or negative. To reduce a ten-item delivery to nine, enter -1 in the Quantity field. To increase a ten-item delivery to eleven, enter 1 in the Quantity field. You cannot create supply when none exists. For example, if you receive and deliver 10 items before discovering that you actually delivered 11 items, you cannot simply increase the delivery quantity to 11. First you must increase your receipt transaction from 10 to 11. Then you can increase your delivery transaction from 10 to 11.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 84
Difference between Returns and Corrections
Difference between Returns and Corrections
Updates costUpdates cost
No physical return of goods to supplier
Updates quantity on hand
Physical return of goodsto supplier
Updates quantity on hand
Receiving Return Receiving Correction
Difference between Returns and Corrections
Receiving Return You can return delivered items to receiving and return received or delivered externally sourced items to the supplier if the purchase order has neither been canceled nor finally closed. You can also return to the supplier unordered receipts that have not been matched. You can also optionally specify additional return information such as a Reason Code and RMA (Return Material Authorization) number. Receiving Correction Purchasing provides the capability to correct any receiving transaction, except another correction and a return to a receiving transaction. Each transaction is done individually correcting the previous transactions until all applicable transactions are corrected.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 85
Guided Demonstration - Inspect and Deliver a Receipt (Required)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Receiving Transactions (M1-Seattle Manufacturing)
Perform a Quality Inspection
1. Receipt = Your receipt number
2. (B) Find
3. (B) Inspect
Note: If Oracle Quality is installed and at least one inspection plan exists for the transaction, both the Enter Quality Results option in the Tools menu and the Quality button on the menu bar will be enabled. If the QA: PO Inspection Profile option is set to Quality, when you click the Inspect button, it opens the Quality Inspection window that you defined, instead of the Purchasing Inspection window.
4. Enter inspection results according to the table:
Item Inspect
Result Quantity Quality Code Reason
Code
Comment
XXMonitor Accept 2 Above Average
Blank Passed inspection
XXMonitor Reject 2 Below Average
CompDefect Failed inspection
5. (B) OK
6. Save
7. Close the Receiving Transactions window.
Deliver Goods to a Final Destination
8. Open the Receiving Transactions window:
9. (N) Receiving > Receiving Transactions
10. In the Receipt field, enter your receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 86
11. (B) Find
12. Complete the Receiving Transaction according to the following table:
Inspection Qty UOM Destination
Type
Item Location
Accepted Defaults Each Inventory XXMonitor M1-Seattle
Note: You’ll need to use this window carefully. Determine which record was the accepted item and which was the rejected item!
13. Save
Review Receiving Transactions
14. Open the Find Receiving Transactions window:
15. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
16. In the Receipt field, enter your receipt number.
17. (B) Find
18. (B) Transactions to open the Receipt Transaction Summary window.
19. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 87
Guided Demonstration - Process a Return to Supplier (Optional)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Returns (M1 – Seattle Manufacturing)
You can use the Returns window to return goods to a supplier OR to a customer. You may return goods to a customer if you had received defective goods, repaired them and are now ready to return them. In this exercise, you will return the goods that failed inspection to the supplier.
Return Goods to a Supplier
1. In the Receipt field enter your receipt number from the prior lab.
2. (T) Transaction Details
3. Transaction Type = Reject
4. (B) Find
5. Click the line selector check box to the left of the Quantity field.
6. Enter return information according to the following table:
Qty Return-To Supplier RMA Number Item
2 Supplier XXIBM Corporation XXRMA XXMonitor
7. (T) Details
8. Reason = CompDefect
9. Save
Review Receiving Transactions
10. Open the Find Receiving Transactions window:
11. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
12. In the Receipt field, enter the receipt number.
13. (B) Find
14. (B) Transactions to open the Receipt Transaction Summary window.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 88
15. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 89
Guided Demonstration - Correct a Receiving Error (Optional)
Responsibility: XXPurchasing, Vision Operations
(N) Receiving > Corrections
Warehouse personnel are missing two items you’ve processed as delivered. You realize that you processed your express receipt too quickly and the last two items were not shipped.
Correct the Delivery Transaction
1. Receipt = Your receipt from Express Receiving
2. (T) Transaction Details
3. Transaction Type = Deliver
4. (B) Find
5. (T) Order Information
6. Select shipment number 3 (the last shipment for the item on your purchase order)
7. Quantity = -2
8. Comments = Correct error in receiving transaction
9. Save
Correct the Receive Transaction
10. Navigate to the Corrections window
11. (N) Receiving > Corrections
12. Receipt = Your receipt from the Express Receiving lab
13. (T) Transaction Details
14. Transaction Type = Receive
15. (B) Find
16. (T) Order Information
17. Select shipment number 3 (the last shipment for the item on your purchase order)
18. Quantity = -2
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 90
19. Comments = Correct error in receiving transaction
20. Save
Verify an Expected Receipt now Exists
21. Navigate to the Receipts window
22. (N) Receiving > Receipts
23. Number = Your purchase order number from #1
24. (T) Items
25. Item = XXSoftware
26. (B) Find
27. Note that you should now have an expected delivery for the last shipment of the XXSoftware item.
Review Receiving Transactions
28. Open the Find Receiving Transactions window:
29. (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
30. In the Purchase Order = Your purchase order number from #1
31. (B) Find
32. Select your Express Receipt (should be the second shipment)
33. (B) Transactions to open the Receipt Transaction Summary window.
34. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 91
Practice - Inspect and Deliver a Receipt
Overview
In this practice you will inspect and deliver a receipt. Half of the items you found to be defective. You will deliver half to their final destination and the other half will be returned.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Perform a Quality Inspection
2. Open the Receiving Transactions window: − Purchase Order = Your receipt number
Note: If Oracle Quality is installed and at least one inspection plan exists for the transaction, both the Enter Quality Results option in the Tools menu and the Quality button on the menu bar will be enabled. If the QA: PO Inspection Profile option is set to Quality, when you click the Inspect button, it opens the Quality Inspection window that you defined, instead of the Purchasing Inspection window.
3. Enter inspection results according to the table:
Item Inspect
Result Quantity Quality
Code Reason
Code
Comment
XXMonitor Accept 2 Above Average
Blank Passed inspection
XXMonitor Reject 2 Below Average
CompDefect Failed inspection
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 92
Deliver Goods to a Final Destination
4. Open the Receiving Transactions window:
5. In the Receipt field, enter your receipt number.
6. Complete the Receiving Transaction according to the following table:
Inspection Qty UOM Destination
Type
Item Location
Accepted Defaults Each Inventory XXMonitor M1-Seattle
Rejected Defaults Each Receiving XXMonitor M1-Seattle
Note: You’ll need to use this window carefully. Determine which record was the accepted item and which was the rejected item!
7. Save
Review Receiving Transactions
8. Open the Find Receiving Transactions window:
9. In the Receipt field, enter your receipt number.
10. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 93
Solution - Inspect and Deliver a Receipt
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Perform a Quality Inspection
2. Open the Receiving Transactions window:
• (N) Receiving > Receiving Transactions (M1-Seattle Manufacturing) − Purchase Order = Your receipt number
3. (B) Find
4. (B) Inspect
Note: If Oracle Quality is installed and at least one inspection plan exists for the transaction, both the Enter Quality Results option in the Tools menu and the Quality button on the menu bar will be enabled. If the QA: PO Inspection Profile option is set to Quality, when you click the Inspect button, it opens the Quality Inspection window that you defined, instead of the Purchasing Inspection window.
5. Enter inspection results according to the table:
Item Inspect
Result Quantity Quality
Code Reason
Code
Comment
XXMonitor Accept 2 Above Average
Blank Passed inspection
XXMonitor Reject 2 Below Average
CompDefect Failed inspection
6. (B) OK
7. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 94
8. Close the Receiving Transactions window.
Deliver Goods to a Final Destination
9. Open the Receiving Transactions window:
• (N) Receiving > Receiving Transactions
10. In the Receipt field, enter your receipt number.
11. (B) Find
12. Complete the Receiving Transaction according to the following table:
Inspection Qty UOM Destination
Type
Item Location
Accepted Defaults Each Inventory XXMonitor M1-Seattle
Rejected Defaults Each Receiving XXMonitor M1-Seattle
Note: You’ll need to use this window carefully. Determine which record was the accepted item and which was the rejected item!
13. Save
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 95
Review Receiving Transactions
14. Open the Find Receiving Transactions window:
• (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
15. In the Receipt field, enter your receipt number.
16. (B) Find
17. (B) Transactions to open the Receipt Transaction Summary window.
18. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 96
Practice - Process a Return to Supplier
Overview
You can use the Returns window to return goods to a supplier OR to a customer. You return goods to a customer when you receive defective goods, repair them and then return them. In this exercise, you will return the goods that failed inspection to the supplier.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Return Goods to a Supplier
2. Open the Receiving Returns window:
3. In the Receipt field enter your receipt number from the prior lab.
4. (T) Transaction Details − Transaction Type = Transfer
Qty Return-To Supplier RMA Number Item
2 Supplier Advanced Network Devices
XXRMA XXMonitor
− Reason = CompDefect
Review Receiving Transactions
5. Open the Find Receiving Transactions window:
6. In the Receipt field, enter the receipt number.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 97
7. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 98
Solution - Process a Return to Supplier
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Return Goods to a Supplier
2. Open the Receiving Returns window:
• (N) Receiving > Returns (M1 – Seattle Manufacturing)
3. In the Receipt field enter your receipt number from the prior lab.
4. (T) Transaction Details − Transaction Type = Transfer
5. (B) Find
6. Click the line selector check box to the left of the Quantity field.
Enter return information according to the following table:
Qty Return-To Supplier RMA Number Item
2 Supplier Advanced Network Devices
XXRMA XXMonitor
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 99
7. (T) Details − Reason = CompDefect
8. Save
Review Receiving Transactions
9. Open the Find Receiving Transactions window:
• (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing)
10. In the Receipt field, enter the receipt number.
11. (B) Find
12. (B) Transactions to open the Receipt Transaction Summary window.
13. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 100
Practice - Correct a Receiving Error
Overview
Warehouse personnel are missing two items you’ve processed as delivered. You realize that you processed your express receipt too quickly and the last two items were not shipped. In this practice you will correct a receiving error.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Correct the Delivery Transaction
2. Navigate to the Corrections window − Receipt = Your receipt from the Express Receiving lab
3. (T) Transaction Details − Transaction Type = Deliver
4. (T) Order Information
5. Select shipment number 3 (the last shipment for the item on your purchase order) − Quantity = -2 − Comments = Correct error in receiving transaction
Correct the Receive Transaction
6. Navigate to the Corrections window − Receipt = Your receipt from the Express Receiving lab
7. (T) Transaction Details − Transaction Type = Receive
8. (T) Order Information
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 101
9. Select shipment number 3 (the last shipment for the item on your purchase order) − Quantity = -2 − Comments = Correct error in receiving transaction
Verify an Expected Receipt now Exists
10. Navigate to the Receipts window − Number = Your purchase order number from Lab #1 − Item = XXSoftware
11. Note that you should now have an expected delivery for the last shipment of the XXSoftware item.
Review Receiving Transactions
12. Open the Find Receiving Transactions window: − In the Purchase Order = Your purchase order number from Lab #1
13. Select your Express Receipt
14. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 102
Solution - Correct a Receiving Error
Log on to the System
1. Log on to the system using the following information. − User Name = operations − Password = welcome − Responsibility = Purchasing, Vision Operations
Correct the Delivery Transaction
2. Navigate to the Corrections window
• (N) Receiving > Corrections − Receipt = Your receipt from the Express Receiving lab
3. (T) Transaction Details − Transaction Type = Deliver
4. (B) Find
5. (T) Order Information
6. Select shipment number 3 (the last shipment for the item on your purchase order) − Quantity = -2 − Comments = Correct error in receiving transaction
7. Save
Correct the Receive Transaction
8. Navigate to the Corrections window
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 103
• (N) Receiving > Corrections − Receipt = Your receipt from the Express Receiving lab
9. (T) Transaction Details − Transaction Type = Receive
10. (B) Find
11. (T) Order Information
12. Select shipment number 3 (the last shipment for the item on your purchase order) − Quantity = -2 − Comments = Correct error in receiving transaction
13. Save
Verify an Expected Receipt now Exists
14. Navigate to the Receipts window
• (N) Receiving > Receipts − Number = Your purchase order number from Lab #1
15. (T) Items − Item = XXSoftware
16. (B) Find
Note that you should now have an expected delivery for the last shipment of the XXSoftware item.
Review Receiving Transactions
17. Open the Find Receiving Transactions window:
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 104
• (N) Receiving > Receiving Transactions Summary (M1-Seattle Manufacturing) − In the Purchase Order = Your purchase order number from Lab #1
18. (B) Find
19. Select your Express Receipt (should be the second shipment)
20. (B) Transactions to open the Receipt Transaction Summary window.
21. Review your receipt.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 105
Overview of Pay on Receipt
Overview of Pay on Receipt
Receipt
By packing slip
By receipt
Payables
Delivery
Pay on options: Invoice consolidationoptions:
By site
Invoice
Overview of Pay on Receipt
Purchasing works in conjunction with Payables to streamline the procurement process by generating invoices to suppliers based on receipt transactions. Negotiate with key suppliers to use Pay on Receipt. Every invoice created by the Pay on Receipt process is one less receipt that needs to be manually keyed into Payables. Suppliers can still send the hard copy of the invoice if a physical copy is necessary for archiving. Pay on Receipt enables you to automatically create standard, unapproved invoices for payment of goods based on receipt transactions. Invoices are created using a combination of receipt and purchase order information, eliminating duplicate manual data entry and ensuring accurate and timely data processing. Payment on Receipt is also known as Evaluated Receipt Settlement (ERS) and Self Billing. You can setup your suppliers so the invoice can be based on receipt of goods or delivery of goods to their final destination. The Invoice Summary Level, set at the Supplier Site, controls the number of invoices generated.
• Packing Slip - One invoice will be generated per packing slip. (highest number of invoices)
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 106
• Receipt - One invoice will be generated per receipt. • Site - One invoice will be generated per supplier site (fewest invoices)
After receipt or delivery transactions are created, you must run the Pay on Receipt Autoinvoice process to create invoices and automatically match them to their corresponding purchase orders. The Pay on Receipt Autoinvoice process can be set up to run automatically. Set the PO: Invoice Number Prefix to add a prefix of your choice to the invoice that is created. The number is created based on the Invoice Summary Level.
• Packing Slip - The packing slip number is used as a basis to generate the invoice number. • Receipt - The receipt number is used as a basis to generate the invoice number. • Site - The date is used as a basis to generate the invoice number.
Set the PO: ERS Aging Period profile option to a number of days after the receipt to actually create the invoice when the Pay on Receipt Autoinvoice process runs. A delay will give you time to enter corrections, adjustments and returns (if any) and will result in more accurate invoices being created.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 107
Agenda
Agenda
• Understand the Receiving process• Understand receipt routing• Understand receipt processing methods• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections and Pay on Receipt
• Identify key standard reports• Understand setup options• Understanding additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 108
Reports
Reports
Expected Receipts
Unordered Receipts
Substitute Receipts
Receiving Transactions Register
Receiving Exceptions
Receiving Value by Destination Account
Reports
Expected Receipts Report The Expected Receipts Report can be used to review all or specific supplier sourced expected receipts or expected customer returns that have not yet been received for a particular date or a range of dates. The report excludes purchase orders that are cancelled, closed, or closed for receiving at the header, release, line, or shipment level. You can specify the expected receipts you want to review. Unordered Receipts The Unordered Receipts Report lists all or selected unordered receipts. Unordered receipts refer to received items that receivers could not match to purchase orders or return material authorizations (RMAs). Substitute Receipts Report Use this report to review all or specific substitute receipts. Receiving Transaction Register The Receiving Transactions Register lists detail information about your receiving transactions. The register is sorted by item, category, receipt number, document number, and transaction
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 109
date. The three-part document number represents purchase order number, purchase order line number, and purchase order shipment number. Receiving Exceptions Report Use the Receiving Exceptions Report to review receipts for which there is a receipt exception. These receipts cannot be automatically closed for receiving or invoicing. You can enter a receipt exception when you receive the item. Receiving Value by Destination Account Report The Receiving Value Report by Destination Account lists received items by purchase order destination and distribution account. If you accrue both inventory and expense at the time of receipt, you may have both inventory and expense as part of your receiving valuation account.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 110
Reports
Reports
Receipt Adjustments
Receipt Traveler
Receiving Value
Reports (continued)
Receiving Value The Receiving Value Report shows item quantity, valuation, and detailed receipt information for your receiving inspection location. Receipt Adjustments Report Use this report to review purchase order shipments or internal requisition lines with corrections or returns to vendor. Receipt Traveler The Receipt Traveler facilitates receiving inspection and delivery of goods you receive within your organization. After you receive the goods, you can print receipt travelers and attach these tickets to the goods.
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 111
Summary
Summary
You should now be able be able to do the following:• Describe the process of receiving goods• Understand receipt routing• Understand receipt processing methods• Create Standard, Express, and Cascade receipts• Understand Substitute receipts, Unordered
Receipts, Returns and Corrections• Understand Pay on Receipt• Identify key reports• Understand setup options• Understand additional implementation
considerations
Oracle Internal & OAI Use Only
Copyright © Oracle Corporation, 2003. All rights reserved.
Receiving Chapter 9 - Page 112
Recommended