August 2014 (Rev. A)
Table of ContentsQuestions? 816-774-4050
August 1, 2014 Price List (Rev. A)
2
Finishes 4-9
Edge Detai ls 10-12
Locat ion Codes Pages 19-20
Power Choices 21-38
Options to add to tables 39-49
Accessor ies 50-53(Credenzas, lec terns, AV car ts , e tc . )
Af ix 54-55
Canyon 56-60
Capi to l 61-63
Coby 64-77(Apron & Square Bases)
Empire 78-85(Adjustab le he ight )
Gateway 86-94
Harbor 95-103(Hidden Wheel Opt ion)
Is land 104-107(Round and Square Bases)
Pinnacle 108-110(Occas ional tab les)
Rai lway 111-122(Panel , Cube, Rectangle & U Shaped Bases)
Supreme123-135
Union Contemporary 136-142
Freight Zone Map
Grey- Zone 1 Prepaid freight on orders over $2000 NET Orders under $2000 NET - Add $200 NET to order
White - Zone 2 Prepaid freight on orders over $3000 NET
Orders under $3000 NET - Add $300 NET to order
All products are shipped in compliance with the National Motor Freight Classification Code. All products ship unassembled unless otherwise specified by Hi5
Furniture. Freight is prepaid on a dock to dock basis for all orders exceeding zone minimum nets when shipped within the 48 contiguous states excluding Alaska
and Hawaii or export.
All orders under zone minimum nets are a flat shipping fee of $200 net for zone one and $300 net for zone two, which will be added to the invoice. Hi5 Furniture
shall not be held liable for delays caused by strikes, catastrophes, wars, riots or any other cause beyond our control.
Additional expenses will be debited from customer account and billed as “shipping/handling.” Examples of additional expenses with variable charges are: Inside
delivery, Residential delivery and Lift gate requirements.
Failure to inspect product at time of receipt, note damages on delivery receipt and/or notify Hi5 Furniture of damages within 10 days of the original date of receipt
constitutes acceptance of products and a waiver of all claims. Neither Hi5 Furniture nor the carrier will be responsible for concealed damage claims if shipments are
left unopened. CONCEALED DAMAGE MUST BE REPORTED WITHIN 7 DAYS FROM DELIVERY TO BE VALID. Any concealed damage reported after 7 days
will not be accepted by Hi5 Furniture and is the responsibility of the customer.
All products are loaded on carrier trucks free from defects and/or damage. Responsibility of safe delivery and transport of products is assumed by the carrier upon
loading. It is the customer’s responsibility that all cartons, crates and packages be opened and inspected at time of delivery for damages or shortages regardless of
condition. Any damages found during inspection must be clearly noted on the delivery receipt and packages to be left in original condition as received, failure to do
so will void the ability of filing a freight claim. Hi5 Furniture should be notified immediately to assist in filing of freight claim.
MA
AL
DE
FL
GA
IN
CT
KY
ME
MI
MD
SC
NC
NJ
NY
VTNH
PAOH
WVVA
AZ AR
CA CO
ID
IA
KS
IL
MO
LA
ND
NV NE
MT
MS
MN
WY
NM
OR
TX
OK
SD WI
WA
UT
TN
FREIGHT PROGRAMAugust 1, 2014 Price List (Rev. A)
3
HPL LAMINATE FINISHES
A l l s t a n d a r d f i n i s h e s a r e i n c l u d e d i n H i 5 l i s t p r i c e s . W h e n t h e b a c k o f t h e l a m i n a t e s a m p l e i s m a r k e d “ P R E M I U M ” , C o n t a c t F a c t o r yf o r 1 0 % - 2 0 % u p c h a r g e . F o r t h e m o s t u p t o d a t e l i s t o f S t a n d a r d a n d P r e m i u m f i n i s h e s , p l e a s e v i s i t t h e l a m i n a t e m a n u f a c t u r e r ’ sw e b s i t e l i s t e d b e l o w . F o r U l t r a P r e m i u m L a m i n a t e s o r L A M I N - A R T ® , A B E T ® , A R P A , p l e a s e C o n t a c t F a c t o r y f o r u p c h a r g e s .
A p p r o v e d C l e a n i n g A g e n t s : L e s t o i l ® , P i n e S o l ® , T o p J o b ® , F a n t a s t i k ® , J o y ® , F o r m u l a 4 0 9 ® A l l - P u r p o s e C l e a n e r , C r y s t a l S i m p l e G r e e n ® C l e a n e r , D o w B a t h r o o m C l e a n e r ® , A m m o n i a t e d a n d / o r V i n e g a r - b a s e d G l a s s C l e a n e r . W e d o n o t r e c o m m e n d t h e u s e o f a n y c l e a n e r s w i t h b l e a c h , a n t i - b a c t e r i a f o r m u l a s , a b r a s i v e c l e a n e r s / p o w d e r s o r a b r a s i v e c o a t e d s c o u r i n g p a d s . V a r n i s h , l a c q u e r a n d o i lb a s e p a i n t s c a n b e r e m o v e d f r o m l a m i n a t e b y t h o r o u g h c l e a n i n g u s i n g p r o p e r s o l v e n t o r p a i n t r e m o v e r .
W I L S O N A R T ® w w w . w i l s o n a r t . c o mS t a n d a r d s : - 6 0 ( M a t t e ) , - 3 8 ( F i n e V e l v e t )
P r e m i u m s I n c l u d e : - 0 7 ( T e x t u r e d G l o s s ) , - 1 2 ( S o f t G r a i n ) , - 2 2 ( A n t i q u e ) , - 0 1 ( H i g h G l o s s ) , - 1 8 , ( L i n e a r i t y ) , - 5 2 ( Q u a r r y ) , - 7 8 ( F i n e G r a i n ) , - 9 0 ( C r y s t a l ) ; U l t r a P r e m i u m s I n c l u d e : - 3 5 ( M i r a g e ) , - 4 5 ( F a c e t ) , - 5 5 ( G l a z e )
F O R M I C A ® w w w . f o r m i c a . c o mS t a n d a r d s : - 5 8 ( M a t t e )
P r e m i u m s I n c l u d e : - 0 9 ( B r u s h e d ) , - 1 5 ( Q u i l t e d ) , - 4 2 ( S p a r k l e ) , - 4 3 ( A r t i s a n ) , - 4 5 ( P u n c h e d ) , - 4 6 ( E t c h i n g s ) , - 4 7 ( P o w d e r e d ) , - 7 7 ( H o n e d ) , - 9 0 ( P o l i s h e d ) , - C T ( C h e t o p 2 ) , - F V - V e l o u r ) , - L X ( L u x e ) , - M C ( M i c r o D O T ) , - N T ( N a t u r e l l e ) , - R D ( R a d i a n c e ) , - R W ( R i v e r w a s h ) , - S P ( S c u l p t e d ) , G r a i n e d , M i d g r a i n , A R P l u s , C h i s e l l e d , G l o s s , N D F , Q u a r r y , R i g a t o , S o f t m a t
P I O N I T E ® w w w . p i o n i t e . c o mS t a n d a r d s : S u e d e
P r e m i u m s I n c l u d e : G ( G l o s s ) , J ( C r y s t a l ) , H ( H i - B r i t e ) , Z ( A s h w o o d ) , C ( S o f t L e a t h e r ) , L ( E m b o s s e d L e a t h e r ) , W ( E m b o s s e d S l a t e ) , G r a n i t e , H i - B r i t e , L e a t h e r , L i n e Z , L i n e n , M e d i u m G l o s s , S o f t L e a t h e r , S t o n e X , S u p e r M a t t e , W o o d E s s e n c e
A R B O R I T E w w w . a r b o r i t e . c o m ( A D D 1 W E E K L E A D T I M E T O A L L A R B O R I T E )S t a n d a r d s : C A ( C a s h m e r e ) , D I ( D i a m o n d ) , L Q ( L a q w o o d ) , V L ( V e l v a t e x )
P r e m i u m s I n c l u d e : G L ( G l o s s ) , B C ( B r e c c i a ) , E V ( E v e r g r a i n ) , F P ( F r e n c h P o l i s h ) , L M ( L u m i n o u s ) , R M ( R e f i n e d M a t t e ) , M X ( M e t a l u x ) , S R ( S t r u c t u r e d )
N E V A M A R ® w w w . n e v e m a r . c o m ( A D D 3 W E E K S L E A D T I M E T O A L L N E V A M A R )S t a n d a r d P r i c i n g : T ( T e x t u r e d )
P r e m i u m s I n c l u d e : G ( G l o s s ) , C R ( C r y s t a l ) , Z ( A s h w o o d ) , B ( L e a t h e r ) , C A ( C h e m A r m o r ) , N ( H i - L u s t e r ) , P V ( P o l i s h e d V e l v e t ) , V ( V e l v e t ) , C o u n t e r V , L e a t h e r , S u p e r M a t t e , T e x t u r e d W i t h A R P , W o o d E s s e n c e
N O T E : C h e m S u r f l a m i n a t e i s $ 5 5 l i s t p e r s q u a r e f o o t .
4
ORDERING FINISH SAMPLES
P l e a s e c o n t a c t y o u r l o c a l H i 5 s a l e s r e p r e s e n t a t i v e o r c o n t a c t t h e f a c t o r y a t 8 1 6 - 7 7 4 - 4 0 5 0 . F o r l a m i n a t e s a m p l e s , p l e a s e v i s i t l a m i n a t e m a n u f a c t u r e r ’ s w e b s i t e . A l l f i n i s h s a m p l e s w i l l s h i p s t a n d a r d g r o u n d u n l e s s o t h e r w i s e n o t e d . I f a n e x p e d i t e d d e l i v e r y i s r e q u e s t e d , c u s t o m e r s w i l l n e e d t o p r o v i d e a U P S o r F e d E x a c c o u n t n u m b e r f o r b i l l i n g .
FINISH SAMPLES & HPL LAMINATE FINISHESAugust 1, 2014 Price List (Rev. A)
Brown (BN)
Medium Tone (MT)
METAL FINISHESAugust 1, 2014 Price List (Rev. A)
5
Polished Chrome (CR)
Black Matte (BM)
Black Wrinkle (BW)Charcoal (CH)
Designer White (WT)
Graphite Metallic (GM)
Inner Tone Light (IT)
Silver (SL)
Polished Aluminum (CR)
Designer White Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Medium Tone Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Inner Tone Light Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Brown Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Silver Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Railway, Supreme
Modesty PanelsPower Boxes
Graphite Metallic Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Charcoal Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Black Wrinkle Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Shadow Metallic Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Black Matte Available on:aFIx, Coby, Empire, Gateway, Harbor, Island, Supreme
Modesty PanelsPower Boxes
Polished Aluminum Available on:Harbor, Supreme
*See upcharge per collection
Polished Chrome Available on:aFix (round only), Gateway,Island (round only)
*See upcharge per collection
Shadow Metallic (SH)
Printed finishes may vary from actual finish color, contact Hi5 for actual sample.Orders with 30 or more tables, custom color edges are available – Contact Factory for color choices and pricing.
VINYL EDGE FINISHES – L3 & L5 edge stylesAugust 1, 2014 Price List (Rev. A)
6
Designer White (DW)Matches WA D354-60
Designer WhiteAvailable Edges: L3, L11
Ivory (IV)Matches WA 1503-60 PuttyAvailable Edges: L3, L11
Inner Tone Light (IT)Matches WA D327-60
PepperdustAvailable Edges: L3, L11
Silver (SL)Matches WA D92-60
Dove GreyAvailable Edges: L3, L11
Shadow (SH)Matches WA D96-60
ShadowAvailable Edges: L3, L11
Charcoal (CH)Matches WA D90-60
North SeaAvailable Edges: L3, L11
Medium Tone (MT)Matches WA D91-60
Slate GreyAvailable Edges: L3, L11
Brown(BN)Matches Pionite ST604
Nubian BrownAvailable Edges: L3, L11
Black (BK)Matches WA 1595-60 Black
Available Edges: L3, L11
Graphite Nebula (GN)Matches WA 4623-60
Graphite NebulaAvailable Edges: L3, L11
Manitoba Maple (MA)Matches WA 7911-60
Available Edges: L3, L11
Monticello Maple (MO)Matches WA 7925-38
Available Edges: L3, L11
Huntington Maple (HU)Matches WA 7929-38
Available Edges: L3, L11
Castle Oak (CO)Matches WA 7928-38
Available Edges: L3, L11
Solar Oak (SO)Matches WA 7816-60
Available Edges: L3, L11
Biltmore Cherry (BC)Matches WA 7924-07
Available Edges: L3, L11
Shaker Cherry (SC)Matches WA 7935-07
Available Edges: L3, L11
Colombian Walnut (CW)Matches WA 7943-07
Available Edges: L3, L11
Brighton Walnut (BW)Matches WA 7922-07
Available Edges: L3, L11
Empire Mahogany (EM)Matches WA 7122-07
Available Edges: L3, L11
Printed finishes may vary from actual finish color, contact Hi5 for actual sample.Orders with 30 or more tables, custom color edges are available – Contact Factory for color choices and pricing.
Custom PVC Upcharge: Contact Factory for pricing. Model Code: UCE
7
FORMAWRAP FINISHES – F1, F2, F3, & F4 edge stylesAugust 1, 2014 Price List (Rev. A)
Frost WhiteClose to Laminate:
WA 1573-60 Frosty WhiteAvailable on Edges: F1 – F4
Warm WhiteSimilar to Laminate:
WA D403-60 White SandAvailable on Edges: F1 – F4
Venus SilverNo Matches to HPL LaminateAvailable on Edges: F1 – F4
ShimmerNo Matches to HPL LaminateAvailable on Edges: F1 – F4
Shark GraySimilar to Laminate:
Formica 912-58 StormAvailable on Edges: F1 – F4
Cashmere FiberSimilar to Laminate:
WA 4608-60 Caldera BeigeAvailable on Edges: F1 – F4
GlaStone AshSimilar to Laminate:
WA 1813K-35 Deepstar GlazeAvailable on Edges: F1 – F4
Mineral AmberSimilar to Laminate:
WA 1842-45 Canyon PassageAvailable on Edges: F1 – F4
Mineral GeodeNo Matches to HPL LaminateAvailable on Edges: F1 – F4
River CherryClose to Laminate:
WA 7937-38 River CherryAvailable on Edges: F1 – F4
Hayward CherryClose to Laminate:
WA 7919K-78 Amber CherryAvailable on Edges: F1 – F4
Laguna PebbleNo Matches to HPL LaminateAvailable on Edges: F1 – F4
American NaturalClose to Laminate:
WA 7909-60 Fusion MapleAvailable on Edges: F1 – F4
Almond CherrySimilar to Laminate:
Formica 7737-58 Natural CherryAvailable on Edges: F1 – F4
Urban WalnutSimilar to Laminate:
WA 7110K-78 Montana WalnutAvailable on Edges: F1 – F4
Printed finishes may vary from actual finish color, contact Hi5 for actual sample.
WOOD EDGES AND VENEER FINISHESAugust 1, 2014 Price List (Rev. A)
8
Manitoba Maple (MA)Matches WA 7911-60
Stained on Plain Sliced Hard Maple
Monticello Maple (MM)Matches WA 7925-38
Stained on Plain Sliced Hard Maple
Huntington Maple (HU)Matches WA 7929-38
Stained on Plain Sliced Hard Maple
Castle Oak (CO)Matches WA 7928-38
Stained on Plain SlicedRed Oak
Solar Oak (SO)Matches WA 7816-60
Stained on Plain SlicedRed Oak
Mocha Oak (MO)No Laminate to MatchStained on Plain Sliced
Red Oak
Biltmore Cherry (BC)Matches WA 7924K-07 Stained on Plain Sliced
Cherry
Shaker Cherry (SC)Matches WA 7935K-07 Stained on Plain Sliced
Cherry
Dark Cherry (DC)No Laminate to MatchStained on Plain Sliced
Cherry
Empire Mahogany (EM)Matches WA 7122T-07 Stained on Plain Sliced
Cherry
Onyx (OX)No Laminate to MatchStained on Plain Sliced
Cherry
Columbian Walnut (CW)Matches WA 7943-07
Stained on Plain SlicedCherry
Brighton Walnut (BW)Matches WA 7922K-07 Stained on Plain Sliced
Cherry
Mocha Walnut (MW)No Laminate to MatchStained on Plain Sliced
Cherry
All veneer is grade A, plain sliced grain.Custom stain is available – specify model code: CS, list price is $600 per color.
Please provide sample to match, factory will match and send sample for approval. Printed finishes may vary from actual finish color, contact Hi5 for actual sample.
Custom Finish: $600 List per color match. Model Code: UCS
SOLID SURFACE FINISHES – S1 edge stylesAugust 1, 2014 Price List (Rev. A)
9
Icy White Similar to Corian color
Glacier White
Printed finishes may vary from actual finish color, contact Hi5 for actual sample.
DuneSimilar to Corian color Mojave
KlondikeSimilar to Corian color
Burnt Amber
Sand CastleSimilar to Corian color
Sandstone
FlaxSimilar to Corian color Linen
Starry NightSimilar to Corian color
Black Quartz
OysterSimilar to Hi-Macs color
Almond Pearl
ClaySimilar to Corian color Silt
Dakota DesertSimilar to Corian color Sahara
Pebble BeachSimilar to Corian color
Savannah
SedonaSimilar to Corian color
Matterhorn
MesaSimilar to Hi-Macs color
Aztec Quartz
ArroyoSimilar to Corian color Canyon
North RidgeSimilar to Corian color
Kilimanjaro
Santa FeSimilar to Corian color Maiu
Blue LagoonSimilar to Corian color
Mediterrnean
TundraSimilar to Corian color
Platinum
HeartlandSimilar to Corian color Prairie
EarthSimilar to Corian color Terra
Chocolate ChipSimilar to Corian color
Cocoa Brown
ChestnutSimilar to Corian color Granola
Ambrosia OpusSimilar to Corian color Fossil
MontanaSimilar to Staron color
Quarry Bluff
MeredianSimilar to Hi-Macs color
Volcanic Lattitude
KonaSimilar to Hi-Macs color
Volcanic Kohala
JakartaSimilar to Hi-Macs color
Volcanic Cameroon
Volcanic AshSimilar to Hi-Macs color
Volcanic Tambora
Coral Quartz
10
EDGE PROFILESAugust 1, 2014 Price List (Rev. A)
1.25” thick laminate / wood veneer top.EDGE: Comfort 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Square 1.25” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Knife 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Square 1.25” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Square 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Traditional 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Square 2” w x 1.75” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Reeded 1.25” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Square 2.75” w x 1.75” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Bevel 2” w x 1.25” hSolid wood edges.Mitered square corners.
L37 L16
L33 L20
W37 W16
W33 W20
L34 L30W34 W30
L35 L40W35 W40
L26 L50W26 W50
11
EDGE PROFILESAugust 1, 2014 Price List (Rev. A)
1.25” thick laminate / wood veneer top.EDGE: Bull nose .625” w x 1.25” hBaltic birch (apple ply) wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Knife 2” w x 1.25” hBaltic birch (apple ply) wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Waterfall 1.25” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Bull nosed 1.25” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Waterfall 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Bull nosed 2” w x 1.25” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Waterfall 2” w x 1.75” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Bull nosed 2” w x 1.75” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Waterfall 2.75” w x 1.75” hSolid wood edges.Mitered square corners.
1.25” thick laminate / wood veneer top.EDGE: Bull nosed 2.75” w x 1.75” hSolid wood edges.Mitered square corners.
L17 L18W17 W18
L21 L22W21 W22
L31 L32W31 W32
L41 L42W41 W42
L51 L52W51 W52
12
1.25” thick laminate top.EDGE: Flat 3mm High Impact PVCSquare corners.
1.25” thick laminate top.EDGE: Knife laminated / sealedSquare corners.
1.25” thick laminate top.EDGE: 5/8” Bull nose vinyl 3” Radius corners.Only available in Black.
1.25” thick laminate top.EDGE: Knife 3mm PVC / sealedSquare corners.
1.25” thick laminate top.EDGE: Self edgesSquare corners.
1.25” thick Forma Wrap top.EDGE: 1/8” EasedSquare corners.
1.25” thick laminate top.EDGE: Drop Self Edge 1.25” w x 2” hSquare corners.
1.25” thick Forma Wrap top.EDGE: Comfort edgeSquare corners.
1.25” thick laminate top.EDGE: 1.5 mm Aluminum inlayed PVCSquare corners.
1.5” thick Forma Wrap top.EDGE: Stand-Off KnifeSquare corners.
1.5” thick solid surface top.EDGE: 1/8” Eased .75” w x 1.5” hSquare corners.
1.25” thick Forma Wrap top.EDGE: No DripSquare corners.
S1 F4
L7 F3
L9 F2
L6 F1
L5 L11
L3 L10EDGE PROFILESAugust 1, 2014 Price List (Rev. A)
13
SEATING CHARTAugust 1, 2014 Price List (Rev. A)
SQUARESTable SeatingSize Capacity24” 230” 236” 442” 448” 4/854” 4/860” 872” 8/1284” 8/1296” 12108” 12-16120” 16
ROUNDSTable SeatingSize Capacity24” 230” 236” 3-442” 448” 4-554” 5-660” 6-772” 7-884” 8-1096” 10-11108” 11-13120” 12-14
RECTANGLESTable Training MeetingSize Capacity Capacity18 x 30 1 NA18 x 60 2 NA18 X 66 2 NA18 x 72 2 NA18 x 84 3 NA18 x 90 3 NA18 x 96 3-4 NA18 x 108 4 NA18 x 120 4-5 NA
24 x 30 1 224 x 36 1 224 x 48 1 424 x 54 2 424 x 60 2 624 x 66 2 624 x 72 2 624 x 78 3 624 x 84 3 624 x 90 3 824 x 96 3-4 824 x 108 4 824 x 120 4-5 1024 X 132 4-5 10-1224 x 144 5 12
30 x 36 1 230 x 48 1 430 x 54 2 430 x 60 2 630 x 66 2 630 x 72 2 630 x 78 3 630 x 84 3 630 x 90 3 830 x 96 3-4 830 x 108 4 830 x 120 4-5 1030 X 132 4-5 10-1230 x 144 5 12
36 x 48 1 436 x 54 2 436 x 60 2 636 x 66 2 636 x 72 2 636 x 78 3 636 x 84 3 636 x 90 3 836 x 96 3-4 836 x 108 4 836 x 120 4-5 1036 X 132 4-5 10-1236 x 144 5 12
CONFERENCE[Rectangle/Boat/Racetrack]
Table SeatingSize Capacity42 X 60 642 X 72 642 X 84 642 X 90 842 X 96 842 X 108 8-1042 X 120 1042 X 132 10-1242 X 144 1242 X 168 1442 X 192 1442 X 216 1642 X 240 1642 X 264 1842 X 288 18
48 X 60 648 X 72 648 X 84 648 X 90 848 X 96 848 X 108 8-1048 X 120 1048 X 132 10-1248 X 144 1248 X 168 1448 X 192 1448 X 216 1848 X 240 1848 X 264 2048 X 288 20
60 X 72 860 X 84 860 X 90 1060 X 96 1060 X 108 10-1260 X 120 1260 X 132 1260 X 144 12-1460 X 168 1460 X 192 14-1660 X 216 1860 X 240 2060 X 264 20-2260 X 288 22-24
72 X 84 872 X 90 1072 X 96 1072 X 108 10-1272 X 120 1272 X 132 1272 X 144 12-1472 X 168 1472 X 192 14-1672 X 216 1872 X 240 2072 X 264 20-2272 X 288 22-24
*Note: Seating Capacity based on 30” per seat.
14
TOP SHAPESAugust 1, 2014 Price List (Rev. A)
D-TopA B 24” 33.93”30” 42.43”36” 50.87”
A
A
B
Quarter Round
A B
24” 33.93”
30” 42.43”
36” 50.87”
Crescent
A B C D E
24” 48” 67.87” 31” 33.93”
30” 60” 84.81” 38.75” 42.43”
C
ABE
D
Half Round
A B
24” 48”
30” 60”
36” 72”B
A
Trapezoid
A B C D
24” 60” 36” 20.75”
24” 72” 48” 20.75”
30” 60” 30” 26”
30” 72” 42” 26”
C
A
B
D
Boat
A B
36” 48”
48” 60”
A B
15
BASE PLACEMENT FOR TRAINING TABLESAugust 1, 2014 Price List (Rev. A)
16
BASE PLACEMENT FOR TRAINING TABLESAugust 1, 2014 Price List (Rev. A)
17
NESTING TABLE SPECSAugust 1, 2014 Price List (Rev. A)
Supreme Tables 29” 34” 38” 42”
18” 24” 30” 36”
Empire Tables29” 34” 38”
24” 30” 36”
Gateway Tables29” 34” 38” 38” 60”
18” 24” 30” 36” 60” Round
In order from lowest price to highest price
Harbor Tables29” 34” 38” 38”
18” 24” 30” 36”
T A B L E F U N C T I O N C O D E
A S p r i n g P i n A d j u s t a b l e
E 2 E l e c t r i c 2 s t a g e
E 3 E l e c t r i c 3 s t a g e
F F o l d i n g
H H a n d C r a n k
P P n e u m a t i c
R R a t c h e t
N N e s t i n g
S S t a t i o n a r y
P R O D U C T L I N E C O D E S
A X a F I X
C N C a n y o n
C L C a p i t o l
C Y C o b y
E E E m p i r e
G Y G a t e w a y
H R H a r b o r
I D I s l a n d
O C / S / R P i n n a c l e
R Y R a i l w a y
S P S u p r e m e
U N U n i o n C o n t e m p .
D I S C C O N T I N U E D
C O L L E C T I O N S :
B N B r o o k l y n
L H L a u n c h
L Y L i b e r t y
M N M a d i s o n
M C M a g i c
P R P i e r
S H S t e a l t h
S Y S p e e d w a y
T R T o w e r
U N U n i o n T r a d .
B A S E S T Y L E C O D E S
A P A p r o n B a s e
C 1 C b a s e w i t h 1 c o l u m n
C L C o n f e r e n c e / C u b e H P L
C V C o n f e r e n c e / C u b e V e n e e r
D 1 R o u n d d i s c w i t h 1 c o l u m n
D 8 8 ” a F I X b a s e
P 2 P o s t L e g 2 ”
P 3 P o s t L e g 3 ”
P 4 P o s t L e g 4 ”
P 6 P o s t L e g 6 ”
P C a F I X b a s e w i t h c o v e r
P L P a n e l H P L b a s e
P V P a n e l V e n e e r b a s e
Q 1 S q u a r e d i s c w i t h 1 c o l u m n
R L R e c t a n g l e H P L b a s e
R V R e c t a n g l e V e n e e r b a s e
S Q S q u a r e B a s e
T 1 T b a s e w i t h 1 c o l u m n
T 2 T T b a s e w i t h 2 c o l u m n s
T L T r a i n i n g H P L b a s e
T V T r a i n i n g V e n e e r b a s e
U L U s h a p e d b a s e i n H P L
U V U s h a p e d b a s e i n V e n e e r
X 1 X b a s e w i t h 1 c o l u m n
X 4 X b a s e w i t h 4 c o l u m n s
Y 0 Y b a s e w i t h o u t s t r e t c h e r
Y 1 Y b a s e w i t h s t r e t c h e r
T O P S H A P E C O D E S
B T B o a t
C R C r e s c e n t
C S C u s t o m S h a p e d
D S D S h a p e
E L E l l i p t i c a l / O v a l
H R H a l f R o u n d
H X H e x a g o n
P E P i e
Q R Q u a r t e r R o u n d
R D R o u n d
R E R e c t a n g l e
R T R a c e t r a c k
S Q S q u a r e
T W T e l e - w e d g e
T Z T r a p e z o i d
V H V i d e o C o n f e r e n c e
Base Product Code :
LY T1 2460 RE S L3P r o d u c t B a s e T o p T o p T a b l e T o pL i n e s t y l e s i z e s h a p e f u n c t i o n e d g e
Opt ions in Alphabet ical Order
18
HOW TO BUILD MODEL CODE & SPEC POWERAugust 1, 2014 Price List (Rev. A)
See pages 21 – 38 for a l l power choices
1. Each power box comes s tandard w i th a se t amount o f e lec t r i ca l ou t le ts . Se lec t the power box o r quant i t y o f power boxes that equal the to ta l number o f ou t le ts you want in your tab le . Note the recommendat ions a t the top o f each page: i .e . mob i le nes t ing tab les , con ference tab les , CPU tab les , e tc .
2. Determine i f your power boxes need to l ink toge ther o r w i l l they each p lug in to the f loor ind iv idua l l y . Double check to be sure the power boxes you se lec ted in s tep #1 a re ava i lab le in l ink ing i f th is i s what you need.
3 . Fo l low the s teps on the p r i c ing page o f the power box you se lec ted.I f you se lec ted the Power Pak , Concept , Regula r , Large, Double , M in i -Oas is , Oas is , Mar ina , o r Po ly Trough, see page 22 fo r AV p la te op t ions . A l l ac tua l jacks a re inc luded in the p r ic ing .
19
GANGER & GROMMET LOCATION CODESAugust 1, 2014 Price List (Rev. A)
Grommet Grommet Grommet Grommet GrommetLocation Location Location Location Location
G1 G2 G3 G4 G5
Grommet Grommet Grommet Grommet GrommetLocation Location Location Location Location
G6 G7 G8 G9 G10
Grommet Grommet Grommet Grommet GrommetLocation Location Location Location Location
P1 P2 P3 P4 P5
Grommet Grommet Grommet Grommet GrommetLocation Location Location Location Location
P6 P7 P8 P9 P10
Table Ganger Location A Table Ganger Location B Table Ganger Location C
Table Ganger Location A Table Ganger Location B Table Ganger Location C
Table Ganger Location DTable Ganger Location A
POWER LOCATION CODESAugust 1, 2014 Price List (Rev. A)
20
AV PLATES FOR POWER BOXESAugust 1, 2014 Price List (Rev. A)
21
Add #0 to Model Code for this black plate. Add $10 to power box list price.
Add #1 to Model Code for this plate. Add $160 to power box list price.
Add #2 to Model Code for this plate. Add $235 to power box list price.
Add #3 to Model Code for this black plate. Add $310 to power box list price.
Add #4 to Model Code for this plate. Add $260 to power box list price.
Add #5 to Model Code for this plate. Add $330 to power box list price.
Add #6 to Model Code for this black plate. Add $225 to power box list price.
Add #7 to Model Code for this plate. Add $300 to power box list price.
Add #8 to Model Code for this plate. Add $265 to power box list price.
POWER UNITS NOT SOLD SEPARATELY
BUILD YOUR OWN AV PLATE
Shown: Regular Box with Cord manager
AV plate-$35 list
Each AV Plate has 4 zones.
Each jack below shows how many zones the jack takes up in space.
Data Jack $80 list per jackAlso Called: Network jack, Technical Info: RJ45 CAT6(Siemens Brand)
Phone Jack $45 list per jackAlso Called: Technical Info: CAT3 RJ11
Audio Jack$15 list per jackTechnical Info: Mini Inline Stereo jack
HDMI Jack $170 list per jackAlso Called: Technical Info: HDMI F/F with male patch cord
VGA - 2 zones$135 list per jackAlso Called: Projector jack Technical Info: 15 PIN F/F VGA jack with male patch cord
USB - 2 zones$65 list per jackTechnical Info: USB A/A with patch cord(NOTE: Active Powered USB ports are $105 list each and transformer kit and patch cables.
DVI - 3 zones$260 list per jackTechnical Info:
22
VILLA USB – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
VILLA USBRECOMMENDED FOR:
Laptop Tables, Training, Nesting, Mobile and Lecture Hall Tables
Specs: Two part unit comes in black or silver powder coat. Unit has two power outlets and two 2.1 Amp USB powered ports with outside flange dimensions are 3.39” x 5.68” x 2.25”.
Non-linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required..
Linking: Power boxes cannot link more than 8 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that mount to the underside of the top and terminate at the ends of the top. Specify the quantity and style of feeder cables required. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Understanding the Model Code :PVUSB = Power VillaB = Black / S = Silver1 = 2 data jacks included
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of Wired for Color of ListCode Outlets USB Outlets Data Jacks Circuit Grommet PricePVUSB B 2 2 0 1 Black $425
PVUSB S 2 2 0 1 Silver $425
PVUSB B1 2 2 2 1 Black $535
PVUSB S1 2 2 2 1 Silver $535
Step #2 – List grommet location code in description
POWER UNITS NOT SOLD SEPARATELY
Grommet location code choice:
Training Tables
Pa Pb Pc
23
VILLA USB – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PVUSB = Power VillaL = Linking1 or 2 = Circuit #B = Black / S = Silver1 = 2 data jacks included
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of Wired for Color of ListCode Outlets USB Outlets Data Jacks Circuit QTY Grommet PricePVUSBL1B 2 2 0 1 Black $700
PVUSBL2B 2 2 0 2 Black $700
PVUSBL1S 2 2 0 1 Silver $700
PVUSBL2S 2 2 0 2 Silver $700
PVUSBL1B 1 2 2 2 1 Black $745
PVUSBL2B 1 2 2 2 2 Black $745
PVUSBL1S 1 2 2 2 1 Silver $745
PVUSBL2S 1 2 2 2 2 Silver $745
Step #2 – List grommet location code in description
Step #3 – On a separate line item on Order – List QTY of feeder cablesIf power source is not located on the end of row, see the TEE-MMF below.
Model Code Description Black Cord or Metal Flex Conduit List PricePSTS48F 48” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185PSTS72F 72” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185
PSTH48F 48” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTH72F 72” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
PSTQ48F 48” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTQ72F 72” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
Step #4 – On a separate line item on Order – List optional hardwareModel Code Description Black Cord or Metal Flex Conduit List PriceWhen you select PSTQ48F or PSTQ72F from above, specify the QD-INSERT for your walls or floors.QD-INSERT Insert for wall or floor mounted plate, junction boxes and decorative decora plates not included $85
When you power from the center of a row, specify TEE-MMF below along with your feeder cables from above.TEE-MMF Daisy T used to power from center of row of tables $200
(The male/male/female connector comes with 1 longer FF cable & 1 Male Feeder Cable is exchanged with Female)
When you connect a feeder cable from the right (female) side of table, specify PA12MM below along with your feeder cables from above.PA12MM 12” long non-directional male/male adaptor cable Metal Flex Conduit - comes with End Connector Cap $115PA12FF 12” long non-directional female/female adaptor cable Metal Flex Conduit - comes with End Connector Cap $115
24
VILLA POWER – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
VILLARECOMMENDED FOR:
Laptop Tables, Training, Nesting, Mobile and Lecture Hall Tables
Specs: Two part unit comes in black or silver powder coat. Unit has 2 power outlets with outside flange dimensions are 3.39” x 5.68” x 2.25”.
Non-linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required. Other cord lengths available are 36” and 108” lengths.
Linking: Power boxes cannot link more than 8 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that mount to the underside of the top and terminate at the ends of the top. Specify the quantity and style of feeder cables required. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Understanding the Model Code :PV = Power VillaB = Black / S = Silver1 = 2 data jacks included2 = A/V Unit
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of QTY of Wired for Color of ListCode Outlets Data Jacks F/F VGA Jacks F/F Mini-Stereo Circuit Grommet PricePVB 2 0 0 0 1 Black $290
PVS 2 0 0 0 1 Silver $290
PVB1 2 2 0 0 1 Black $400
PVS1 2 2 0 0 1 Silver $400
PVB2 2 1 1 1 1 Black $480
PVS2 2 1 1 1 1 Silver $480
NON-LINKING VILLA PLUSModel QTY of QTY of QTY of Wired for Color of ListCode Outlets on Top Outlets under Top Data Jacks Circuit Grommet PricePVPB 2 2 0 1 Black $360
PVPS 2 2 0 1 Silver $360
PVPB1 2 2 2 1 Black $470
PVPS1 2 2 2 1 Silver $470
Step #2 – List grommet location code in description
POWER UNITS NOT SOLD SEPARATELY
Grommet location code choice:
Training Tables
Pa Pb Pc
25
VILLA POWER – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PV = Power VillaL = Linking1 or 2 = Circuit #B = Black / S = Silver1 = 2 data jacks included2 = A/V Unit
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of QTY of Wired for Color of ListCode Outlets Data Jacks VGA Jacks Mini-Stereo Circuit QTY Grommet PricePVL1B 2 0 0 0 1 Black $565PVL2B 2 0 0 0 2 Black $565PVL1S 2 0 0 0 1 Silver $565PVL2S 2 0 0 0 2 Silver $565
PVL1B 1 2 2 0 0 1 Black $610PVL2B 1 2 2 0 0 2 Black $610PVL1S 1 2 2 0 0 1 Silver $610PVL2S 1 2 2 0 0 2 Silver $610
PVL1B 2 2 1 1 1 1 Black $690PVL2B 2 2 1 1 1 2 Black $690PVL1S 2 2 1 1 1 1 Silver $690PVL2S 2 2 1 1 1 2 Silver $690
Model QTY of QTY of QTY of Wired for Color of ListCode Outlets on Top Outlets under Top Data Jacks Circuit Grommet PricePVPL1B 2 2 0 1 Black $635PVPL2B 2 2 0 2 Black $635PVPL1S 2 2 0 1 Silver $635PVPL2S 2 2 0 2 Silver $635
PVPL1B 1 2 2 2 1 Black $680PVPL2B 1 2 2 2 2 Black $680PVPL1S 1 2 2 2 1 Silver $680PVPL2S 1 2 2 2 2 Silver $680
Step #2 – List grommet location code in description
Step #3 – On a separate line item on Order – List QTY of feeder cablesIf power source is not located on the end of row, see the TEE-MMF below.
Model Code Description Black Cord or Metal Flex Conduit List PricePSTS48F 48” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185PSTS72F 72” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185
PSTH48F 48” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTH72F 72” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
PSTQ48F 48” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTQ72F 72” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
Step #4 – On a separate line item on Order – List optional hardwareModel Code Description Black Cord or Metal Flex Conduit List PriceWhen you select PSTQ48F or PSTQ72F from above, specify the QD-INSERT for your walls or floors.QD-INSERT Insert for wall or floor mounted plate, junction boxes and decorative decora plates not included $85
When you power from the center of a row, specify TEE-MMF below along with your feeder cables from above.TEE-MMF Daisy T used to power from center of row of tables $200
(The male/male/female connector comes with 1 longer FF cable & 1 Male Feeder Cable is exchanged with Female)
When you connect a feeder cable from the right (female) side of table, specify PA12MM below along with your feeder cables from above.PA12MM 12” long non-directional male/male adaptor cable Metal Flex Conduit - comes with End Connector Cap $115PA12FF 12” long non-directional female/female adaptor cable Metal Flex Conduit - comes with End Connector Cap $115
Villa Plus Linking
26
VILLA UNDER TABLE – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
VILLA UNDER TABLERECOMMENDED FOR:
Laptop Tables, Training, Nesting, and Mobile
Specs: One power bar unit comes in black powder coat. Power bar has 2 power outlets.
Non-Linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops are pre-drilled. Some assembly required.
Linking: Power boxes cannot link more than 8 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that mount to the underside of the top and terminate at the ends of the top. Specify the quantity and style of feeder cables required. All table tops are pre-drilled. Some assembly required.Understanding the Model Code :
PVU = Power Villa Under Table OnlyB = Black 1 = 2 data jacks included2 = A/V Unit
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of QTY of Wired for ListCode Outlets Data Jacks VGA Jacks Mini-Stereo Circuit PricePVUB 2 0 0 0 1 $210
PVUB 1 2 2 0 0 1 $320
PVUB 2 2 1 1 1 1 $405
27
VILLA UNDER TABLE – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PVU = Power Villa Under Table OnlyL = Linking1 or 2 = Circuit #B = Black 1 = 2 data jacks included2 = A/V Unit
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of QTY of Wired for ListCode Outlets Data Jacks VGA Jacks Mini-Stereo Circuit PricePVUL1B 2 0 0 0 1 $420
PVUL2B 2 0 0 0 2 $420
PVUL1B 1 2 2 0 0 1 $530
PVUL2B 1 2 2 0 0 2 $530
PVUL1B 2 2 1 1 1 1 $615
PVUL2B 2 2 1 1 1 2 $615
Step #2 – On a separate line item on Order – List QTY of feeder cablesIf power source is not located on the end of row, see the TEE-MMF below.
Model Code Description Black Cord or Metal Flex Conduit List PricePSTS48F 48” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185PSTS72F 72” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185
PSTH48F 48” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTH72F 72” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
PSTQ48F 48” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTQ72F 72” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
Step #3 – On a separate line item on Order – List optional hardwareModel Code Description List Price
When you select PSTQ48F or PSTQ72F from above, specify the QD-INSERT for your walls or floors.QD-INSERT Insert for wall or floor mounted plate, junction boxes and decorative decora plates not included $85
When you power from the center of a row, specify TEE-MMF below along with your feeder cables from above.TEE-MMF Daisy T used to power from center of row of tables $200
(The male/male/female connector comes with 1 longer FF cable & 1 Male Feeder Cable is exchanged with Female)
When you connect a feeder cable from the right (female) side of table, specify PA12MM below along with your feeder cables from above.PA12MM 12” long non-directional male/male adaptor cable Metal Flex Conduit - comes with End Connector Cap $115PA12FF 12” long non-directional female/female adaptor cable Metal Flex Conduit - comes with End Connector Cap $115
28
POWER PAK – 4 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
POWER PAKRECOMMENDED FOR:
CPU Tables
Specs: Unit has 4 power outlets with outside flange dimensions are 11.37” wide x 4.5” tall x 2.37” deep. Can not link more than 3 units per circuit. A 96” long starter cable comes with the starter table. The Add-on tables come with metal flexible connecting cables that reach from one power unit to the next.
Understanding the Model Code :PP = Power PAK Circuit ## of Power OutletsS = Starter Table / A = Add-On TableS = Soft Wired / Hard Wired
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of QTY of QTY of Starter or Soft Wired / QTY of List Price ofCode #1 Outlets #2 Outlets #3 Outlets #4 Outlets Add-on-Table Hard Wired AV Plates w/o A/V PlatesPP14-SS 4 0 0 0 Starter Soft Wired 2 $330
PP14-SH 4 0 0 0 Starter Hard Wired 2 $330
PP14A 4 0 0 0 Add-On N/A 2 $330
PP24A 0 4 0 0 Add-On N/A 2 $330
PP34A 0 0 4 0 Add-On N/A 2 $330
PP44A 0 0 0 4 Add-On N/A 2 $330
Step #2 – Add AV plates to power model code
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
AV Plates-See Page 21 Black AV plates come with
jacks as shown
29
CONCEPT POWER – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PC = Power ConceptB = Black SS = Stainless Steel
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of 72” Corded Wired for Color or QTY of List Price ofCode Outlets 15 AMP 3 Pronged Plug Circuit # Grommet AV Plates PWR Box w/o AV PlatesPCB 4 1 1 Black 2 $1080
Step #2 – List grommet location code in description
CONCEPTRECOMMENDED FOR:
Round Tables
Specs: Two part unit comes in black or stainless steel. Unit has 4 power outlets with outside flange dimensions are 6” diameter x 14.5” deep.
Non-linking: Power box wired for circuit 1 with 72” long soft wired 20 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code
Step #4 – List length of feeder cable(s) in description if other than 72” long
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
AV Plates-See Page 21 Black AV plates come with
jacks as shown
30
REGULAR POWER – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PR = Power RegularB = Black / S = Silver4 = 4 Outlets1 = 4 Data Jacks
NON-LINKINGStep #1 – Add QTY of power box to table model codeModel QTY of QTY of 72” Corded Wired for Color of QTY of List Price ofCode Outlets 15 AMP 3 Pronged Plug Circuit # Grommet AV Plates PWR Box w/o AV PlatesPRB 2 1 1 Black 1 $300
PRS 2 1 1 Silver 1 $300
PRB4 4 1 1 Black 0 $300
PRS4 4 1 1 Silver 0 $300
PRB4 1 4 1 1 Black 0* $300
PRS4 1 4 1 1 Silver 0* $300
*Note: PRB4 1 and PRS4 1 come with 4 data jacks.All PRB4 and PRS4 units do not include an outlet on the bottom of the unit.
Step #2 – List grommet location code in description
REGULARRECOMMENDED FOR:
Training, Meeting or Conference Tables with limited AV needs
Specs: Drop in table top unit comes in black or silver powder coat. Unit has 2 power outlets with outside flange dimensions are 5.34” x 8.98”.
Non-linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Linking: Power boxes can not link more than 8 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that come from bottom of unit and stretch to next the unit. Specify the quantity and style of feeder cables required. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code
Step #4 – List length of feeder cable(s) in description if other than 72” long
96” Length Upcharge is $50
108” Length Upcharge is $50
144” Length Upcharge is $50
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
Grommet location code choice:Training Tables Conference Tables
Pa Pb Pc Pd Pe Pf Pg Ph
AV Plates-See Page 21 Black AV plates come with
jacks as shown
31
REGULAR POWER – 2 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PR = Power RegularB = Black / S = Silver1 or 2 = CircuitL = Linking
LINKINGStep #1 – Add QTY of power box to table model codeModel QTY of QTY of Wired for Color of List Price ofCode Outlets AV Plates Circuit # Grommet PWR Box w/o AV Plates PRL1B 2 1 1 Black $655
PRL2B 2 1 2 Black $655
PRL1S 2 1 1 Silver $675
PRL2S 2 1 2 Silver $675
Step #4 – On a separate line item on Order – List QTY of feeder cablesIf power source is not located on the end of row, see the TEE-MMF below.
Model Code Description Black Cord or Metal Flex Conduit List PricePSTS48F 48” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185PSTS72F 72” soft wire feeder cable (1 circuit systems) 24” Corded & 24” Metal Flex-comes with End Connector Cap $185
PSTH48F 48” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTH72F 72” hard wire feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
PSTQ48F 48” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125PSTQ72F 72” quick disconnect feeder cable (1 or 2 circuit systems) Metal Flex Conduit - comes with End Connector Cap $125
Step #5 – On a separate line item on Order – List optional hardwareModel Code Description List Price
When you select PSTQ48F or PSTQ72F from above, specify the QD-INSERT for your walls or floors.QD-INSERT Insert for wall or floor mounted plate, junction boxes and decorative decora plates not included $85
When you power from the center of a row, specify TEE-MMF below along with your feeder cables from above.TEE-MMF Daisy T used to power from center of row of tables $200
(The male/male/female connector comes with 1 longer FF cable & 1 Male Feeder Cable is exchanged with Female)
When you connect a feeder cable from the right (female) side of table, specify PA12MM below along with your feeder cables from above.PA12MM 12” long non-directional male/male adaptor cable Metal Flex Conduit - comes with End Connector Cap $115PA12FF 12” long non-directional female/female adaptor cable Metal Flex Conduit - comes with End Connector Cap $115
Step #2 – List grommet location code in description
Step #3 – Add AV plates to power model code
32
LARGE POWER – 4 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PL = Power LargeB = Black / S = SilverH = Hard Wired
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of Soft Wired or Wired for Color of QTY of List Price ofCode Outlets Hardwired Circuit # Grommet AV Plates PWR Box w/o AV PlatesPLB 4 Soft Wired 1 Black 4 $720
PLS 4 Soft Wired 1 Silver 4 $720
PLBH 4 Hard Wired 1 Black 4 $720
PLSH 4 Hard Wired 1 Silver 4 $720
Step #2 – List grommet location code in description
LARGERECOMMENDED FOR:
Training, Meeting or Conference Tables with moderate AV needs
Specs: Drop in table top unit comes in black or silver powder coat. Unit has 4 power outlets with outside flange dimensions are 6.68” x 14.27”.
Non-Linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
Step #4 – List length of feeder cable(s) in description if other than 72” long
96” Length Upcharge is $50
108” Length Upcharge is $50
144” Length Upcharge is $50
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
Grommet location code choice:Training Tables Conference Tables
Pa Pb Pc Pd Pe Pf Pg Ph
AV Plates-See Page 21 Black AV plates come with
jacks as shown
33
DOUBLE POWER – 8 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PD = Power DoubleB = Black / S = SilverH = Hard Wired
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of Soft Wired or Wired for Color of QTY of List Price ofCode Outlets Hardwired Circuit # Grommet AV Plates PWR Box w/o AV PlatesPDB 8 Soft Wired 1 Black 8 $1170
PDS 8 Soft Wired 1 Silver 8 $1170
PDBH 8 Hard Wired 1 Black 8 $1170
PDSH 8 Hard Wired 1 Silver 8 $1170
Step #2 – List grommet location code in description
DOUBLERECOMMENDED FOR:
Training, Meeting or Conference Tables with moderate AV needs
Specs: Drop in table top unit comes in black or silver powder coat. Unit has 4 power outlets with outside flange dimensions are 11.46” x 14.27”.
Non-linking: Power box wired for circuit 1 with 72” long soft wired 15 AMP corded plug and includes a 3rd convenience outlet under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
Step #4 – List length of feeder cable(s) in description if other than 72” long
96” Length Upcharge is $50
108” Length Upcharge is $50
144” Length Upcharge is $50
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
Grommet location code choice:Conference Tables
Pd Pe Pf Pg Ph
AV Plates-See Page 21 Black AV plates come with
jacks as shown
34
MINI OASIS – 4, 6, or 8 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PM = Power Mini OasisB = Black / S = Silver4, 6, 8 = # of Outlets Per Box
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of 108” Corded Wired for Color of QTY of List Price ofCode Outlets 15 AMP 3 Pronged Plug Circuit # Grommet AV Plates PWR Box w/o AV PlatesPMB4 4 1 1 Black 3 $1615
PMS4 4 1 1 Silver 3 $1615
PMB6 6 2 1 Black 2 $1615
PMS6 6 2 1 Silver 2 $1615
PMB8 8 2 1 Black 0 $1615
PMS8 8 2 1 Silver 0 $1615
Step #2 – List grommet location code in description
MINI OASISRECOMMENDED FOR:
Conference Tables with moderate AV needs
Specs: Drop in table top unit comes in black or silver powder coat. Unit has 4, 6 or 8 power outlets with outside flange dimensions are 9” x 15”.
Non-linking: Power box wired for circuit 1 soft wired 15 AMP 108” corded plug and includes a steel pan under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Linking: Power boxes can not link more than 3 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that come from bottom of unit and stretch to next the unit. Specify the quantity and style of feeder cables required. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
Step #4 – List length of feeder cable(s) in description if other than 108” long
96” Length Upcharge is $50
144” Length Upcharge is $50
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
Grommet location code choice:Conference Tables
Pd Pe Pf Pg Ph
AV Plates-See Page 21 Black AV plates come with
jacks as shown
35
MINI OASIS – 4, 6, or 8 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PM = Power Mini OasisL = Linking1 or 2 = Circuit #B = Black / S = Silver4, 6, 8 = # of Outlets in BoxS = Starter Table / A = Add-On TableS = Soft Wired / H = Hard Wired / Q = Quick Disconnect
LINKINGStep #1 – Add QTY of power box to table model codeModel QTY of Starter or 108” Soft Wired / Hard Wired Wired for Color of QTY of List Price ofCode Outlets Add-On Table or Interconnecting Cables Circuit # Grommet AV Plates PWR Box w/o AV PlatesPML1B4SS 4 Starter Soft Wired 1 Black 3 $2010PML1B4SH 4 Starter Hard Wired 1 Black 3 $2010PML1B4SQ 4 Starter Quick Disconnect 1 Black 3 $2010PML1B4A 4 Add-On Interconnecting Cables 1 Black 3 $1950PML2B4A 4 Add-On Interconnecting Cables 2 Black 3 $1950
PML1B4SS 4 Starter Soft Wired 1 Silver 3 $2010PML1B4SH 4 Starter Hard Wired 1 Silver 3 $2010PML1B4SQ 4 Starter Quick Disconnect 1 Silver 3 $2010PML1B4A 4 Add-On Interconnecting Cables 1 Silver 3 $1950PML2B4A 4 Add-On Interconnecting Cables 2 Silver 3 $1950
PML1B6SS 6 Starter Soft Wired 1 Black 2 $2010PML1B6SH 6 Starter Hard Wired 1 Black 2 $2010PML1B6SQ 6 Starter Quick Disconnect 1 Black 2 $2010PML1B6A 6 Add-On Interconnecting Cables 1 Black 2 $1950PML2B6A 6 Add-On Interconnecting Cables 2 Black 2 $1950
PML1B6SS 6 Starter Soft Wired 1 Silver 2 $2010PML1B6SH 6 Starter Hard Wired 1 Silver 2 $2010PML1B6SQ 6 Starter Quick Disconnect 1 Silver 2 $2010PML1B6A 6 Add-On Interconnecting Cables 1 Silver 2 $1950PML2B6A 6 Add-On Interconnecting Cables 2 Silver 2 $1950
PML1B8SS 8 Starter Soft Wired 1 Black 0 $2010PML1B8SH 8 Starter Hard Wired 1 Black 0 $2010PML1B8SQ 8 Starter Quick Disconnect 1 Black 0 $2010PML1B8A 8 Add-On Interconnecting Cables 1 Black 0 $1950PML2B8A 8 Add-On Interconnecting Cables 2 Black 0 $1950
PML1B8SS 8 Starter Soft Wired 1 Silver 0 $2010PML1B8SH 8 Starter Hard Wired 1 Silver 0 $2010PML1B8SQ 8 Starter Quick Disconnect 1 Silver 0 $2010PML1B8A 8 Add-On Interconnecting Cables 1 Silver 0 $1950PML2B8A 8 Add-On Interconnecting Cables 2 Silver 0 $1950
Step #2 – List grommet location code in description
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
Step #4 – On a separate line item on Order – List optional hardwareModel Code Description List Price
When you select PSTQ48F or PSTQ72F from above, specify the QD-INSERT for your walls or floors.QD-INSERT Insert for wall or floor mounted plate, junction boxes and decorative decora plates not included $85
When you power from the center of a row, specify TEE-MMF below along with your feeder cables from above.TEE-MMF Daisy T used to power from center of row of tables $200
(The male/male/female connector comes with 1 longer FF cable & 1 Male Feeder Cable is exchanged with Female)
When you connect a feeder cable from the right (female) side of table, specify PA12MM below along with your feeder cables from above.PA12MM 12” long non-directional male/male adaptor cable Metal Flex Conduit - comes with End Connector Cap $115PA12FF 12” long non-directional female/female adaptor cable Metal Flex Conduit - comes with End Connector Cap $115
36
OASIS – 8, 12, or 16 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PO = Power OasisB = Black / S = Silver8, 12, 16 = # of Outlets Per Box
NON-LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of QTY of 108” Corded Wired for Color of QTY of List Price ofCode Outlets 15 AMP 3 Pronged Plug Circuit # Grommet AV Plates PWR Box w/o AV PlatesPOB8 8 2 1 Black 6 $2650
POS8 8 2 1 Silver 6 $2650
POB12 12 4 1 Black 4 $2650
POS12 12 4 1 Silver 4 $2650
POB16 16 4 1 Black 0 $2650
POS16 16 4 1 Silver 0 $2650
Step #2 – List grommet location code in description
OASISRECOMMENDED FOR:
Conference Tables with AV needs
Specs: Drop in table top unit comes in black or silver powder coat. Unit has 8, 12 or 16 power outlets with outside flange dimensions are 9” x 30”.
Non-Linking: Power box wired for circuit 1 soft wired 15 AMP corded plug and includes a steel pan under the table. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Linking: Power boxes can not link more than 2 units per circuit. Linking boxes are wired for either circuit 1 or circuit 2 with metal flexible conduit interconnecting cables that come from bottom of unit and stretch to next the unit. Specify the quantity and style of feeder cables required. All table tops include power box cut outs and are pre-drilled. Some assembly required.
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
Step #4 – List length of feeder cable(s) in description if other than 108” long
96” Length Upcharge is $50
144” Length Upcharge is $50
Add #0 to Model Code for this plate.
Add $10 to list price.
Add #1 to Model Code for this plate.
Add $160 to list price.
Add #2 to Model Code for this plate.
Add $235 to list price.
Add #3 to Model Code for this plate. Add $310 to list price.
Add #4 to Model Code for this plate. Add $260 to list price.
Add #5 to Model Code for this plate.
Add $330 to list price.
Add #6 to Model Code for this plate. Add $225 to list price.
Add #7 to Model Code for this plate. Add $300 to list price.
Add #8 to Model Code for this plate.
Add $265 to list price.
Grommet location code choice:Conference Tables
Pd Pe Pf Pg Ph
AV Plates-See Page 21 Black AV plates come with
jacks as shown
37
OASIS – 8, 12, or 16 OUTLETS PER BOXAugust 1, 2014 Price List (Rev. A)
POWER UNITS NOT SOLD SEPARATELY
Understanding the Model Code :PO = Power OasisL = Linking1 or 2 = Circuit #B = Black / S = Silver8, 12, 16 = # of Outlets per BoxS = Starter Table / A = Add-On TableS = Soft Wired / H = Hard Wired / Q = Quick Disconnect
LINKINGStep #1 – Add QTY of power box to power model codeModel QTY of Starter or Soft Wired / Hard Wired or Wired for Color of QTY of List Price ofCode Outlets Add-On Table Interconnecting Cables Circuit # Grommet AV Plates PWR Box w/o AV PlatesPOL1B8SS 8 Starter Soft Wired 1 Black 6 $3385
POL1B8SH 8 Starter Hard Wired 1 Black 6 $3385
POL1B8SQ 8 Starter Quick Disconnect 1 Black 6 $3385
POL1B8A 8 Add-On Interconnecting Cables 1 Black 6 $3330
POL2B8A 8 Add-On Interconnecting Cables 2 Black 6 $3330
POL1B8SS 8 Starter Soft Wired 1 Silver 6 $3385
POL1B8SH 8 Starter Hard Wired 1 Silver 6 $3385
POL1B8SQ 8 Starter Quick Disconnect 1 Silver 6 $3385
POL1B8A 8 Add-On Interconnecting Cables 1 Silver 6 $3330
POL2B8A 8 Add-On Interconnecting Cables 2 Silver 6 $3330
POL1B12SS 12 Starter Soft Wired 1 Black 4 $3385
POL1B12SH 12 Starter Hard Wired 1 Black 4 $3385
POL1B12SQ 12 Starter Quick Disconnect 1 Black 4 $3385
POL1B12A 12 Add-On Interconnecting Cables 1 Black 4 $3330
POL2B12A 12 Add-On Interconnecting Cables 2 Black 4 $3330
POL1B12SS 12 Starter Soft Wired 1 Silver 4 $3385
POL1B12SH 12 Starter Hard Wired 1 Silver 4 $3385
POL1B12SQ 12 Starter Quick Disconnect 1 Silver 4 $3385
POL1B12A 12 Add-On Interconnecting Cables 1 Silver 4 $3330
POL2B12A 12 Add-On Interconnecting Cables 2 Silver 4 $3330
POL1B16SS 16 Starter Soft Wired 1 Black 0 $3385
POL1B16SH 16 Starter Hard Wired 1 Black 0 $3385
POL1B16SQ 16 Starter Quick Disconnect 1 Black 0 $3385
POL1B16A 16 Add-On Interconnecting Cables 1 Black 0 $3330
POL2B16A 16 Add-On Interconnecting Cables 2 Black 0 $3330
POL1B16SS 16 Starter Soft Wired 1 Silver 0 $3385
POL1B16SH 16 Starter Hard Wired 1 Silver 0 $3385
POL1B16SQ 16 Starter Quick Disconnect 1 Silver 0 $3385
POL1B16A 16 Add-On Interconnecting Cables 1 Silver 0 $3330
POL2B16A 16 Add-On Interconnecting Cables 2 Silver 0 $3330
Step #2 – List grommet location code in description
Step #3 – Add AV plates to power model code [See page 20 for AV Plate options]
38
PAGE INTENTIONALLY LEFT BLANK
39
FLEXIBLE METAL MODESTY PANEL - PERFORATED14” High, .22 gauge steel flexible modesty panel. Panels feature .18” diameter perforated holes centered every 3” and a durable powder coat finish. Available in black or silver. Modesty panels are inset 2” from each edge. Contact Factory for continuous panels. Modesty panel and the underside of the table top are predrilled. Attachment Hardware and assembly instructions are included for field Installation. Model Code: MMC??
30” table $280 list price 48” table $340 list price For 84” tables spec two 42” panels $640 list price36” table $300 list price 60” table $380 list price For 96” tables spec two 48” panels $680 list price42” table $320 list price 72” table $400 list price
MODESTY PANEL OPTION SPECSAugust 1, 2014 Price List (Rev. A)
FLEXIBLE WOOD VENEER MODESTY PANEL - PERFORATED14” High, .25” thick flexible modesty panel. Face of panel is finished with vertical grain wood veneer and features .25” diameter perforated holes centered every 2”. Back and edges are black. Modesty panels are inset 2” from each edge. Contact Factory for continuous panels. Attachment Hardware and assembly instructions are included for field Installation. Model Code: MWC??
30” table $540 list price 48” table $590 list price 84” table $1160 36” table $550 list price 60” table $710 list price 96” table $118042” table $580 list price 72” table $730 list price
FLEXIBLE LAMINATED MODESTY PANEL – NONPERFORATED14” High, .25” thick flexible modesty panel. Face of panel is finished with high pressure laminate, back and edges are black. Modesty panels are inset 2” from each edge. Contact Factory for continuous panels. Attachment Hardware and assembly instructions are included for field Installation. Model Code: MLC??
30” table $300 list price 48” table $360 list price 84” table $680 list price36” table $320 list price 60” table $400 list price 96” table $720 list price42” table $340 list price 72” table $420 list price
PERFORATED METAL MODESTY PANEL9” High, 20 gauge steel with a durable powder coat finish. Available in black or silver. Modesty panels are free swinging on all tables. Not available on folding tables. Modesty panel and the underside of the table top are predrilled. Attachment Hardware and assembly instructions are included for field installation. Ganging plate and screws provided for tables longer than 72”. Model Code: MM??
30” table $185 list price 48” table $230 list price For 84” tables spec two 42” panels $450 list price36” table $190 list price 60” table $245 list price For 96” tables spec two 48” panels $460 list price42” table $225 list price 72” table $265 list price
LAMINATED MODESTY PANEL9” High, .75” thick particle board. Finished with laminate both sides and all edges. Modesty panel and the underside of the table top are predrilled. Attachment Hardware and assembly instructions are included for field Installation. Model Code: ML??
30” table $210 list price 48” table $250 list price For 84” tables spec two 42” panels $480 list price36” table $230 list price 60” table $270 list price For 96” tables spec two 48” panels $500 list price42” table $240 list price 72” table $300 list price
WOOD VENEER MODESTY PANEL9” High, .75” thick particle board finished with wood veneer both sides and all edges. Not available on folding tables. Modesty panel and the underside of the table top are predrilled. Attachment Hardware and assembly instructions are included for field Installation. Model Code: MV??
30” table $440 list price 48” table $490 list price For 84” tables spec two 42” panels $960 list price36” table $450 list price 60” table $610 list price For 96” tables spec two 48” panels $980 list price42” table $480 list price 72” table $630 list price
Lead Times: 4 - 6 weeks laminate table | 6 - 8 weeks for wood edged tables | 8-10 weeks for wood veneer tables and customsFinishes: Pages 4-9 | Power: Pages 21-38 | Options: Pages 39-49
Replace the ?? with the size of table to complete the model code. [ex. ML36 – is for a Laminated modesty panel on a 36” long table.]
VERTICAL ABS PLASTIC WIRE MANAGEMENT - ROUNDHalf round shaped 2.68” x 1”, combination of rigid and flexible PVC, vertical wire management. Heavy duty self-adhesive sticky tape is pre-installed on hinged edges of 22” long piece which allows track to conform easily to curved surface. Available in Black or Silver. Field Installed.
Model Code: WVB (black) or WVS (silver) $25 list price per base
VERTICAL ABS PLASTIC WIRE MANAGEMENT - RECTANGLERectangle shaped 1” x 2”, combination of rigid and flexible PVC, vertical wire management. Heavy duty self-adhesive sticky tape is pre-installed on hinged edges of 22” long piece which allows track to conform easily to surface. Available in Black or Silver. Field Installed.
Model Code: WRB (black) or WRS (silver) $25 list price per base
40
WIRE MANAGEMENT OPTION SPECSAugust 1, 2014 Price List (Rev. A)
VERTICAL LASER CUT HOLE WIRE MANAGEMENT1.5” x 2.5” holes cut in top and bottom of column to feed wire(s) in and out of base.
Model Code: WB $50 list price per base
aFIX ROUND BASE VERTICAL WIRE MANAGEMENT3” diameter column with 1.5” round holes cut in top and bottom of column to allow wire(s) to feed in and out of column. Holes are located approximately 2.5” from top of the base and 2.5” from floor. Wire(s) can be ran directly into the bottom of base, wire bundle must fi t within a 2.5” diameter area.
Model Code: WB $50 list price per base
aFIX BOAT-SHAPE BASE VERTICAL WIRE MANAGEMENTThe aFix Base was designed with wire management in mind, features a 3.625” x 8” boat-shaped column with 3.5”wide x 2” high openings in top of column to feed wire(s) into base with a 1.875” wide x 3.875” long opening through column to feed wire(s) down to the floor.
aFIX ROUND STEEL FLOOR COVER7.5” round X 1.375” high steel bottom cover plate powder-coated Black or Silver. Cover plate is free spinning, designed to sit over standard black ABS plastic molded plate.
Model Code: AXPC $130 list price per base
HORIZONTAL CONFERENCE WIRE MANAGEMENT TROUGH12” wide x 34” long x 6” high 18 gage steel track, with eight 6” access holes, powder coated black. Attachment hardware and installation instructions are included. Field installed.
Model Code: WT $475 list price per trough
41
WIRE MANAGEMENT OPTION SPECSAugust 1, 2014 Price List (Rev. A)
HORIZONTAL WIRE MANAGEMENT TRACK3” x .75” 4-channel wire management track, a co-extrusion with rigid sides and a softer top. Each channel is .75” x .625”. In the center of each channel is a slot which has a memory, so it closes back up. Sold in 36” lengths, easily cut to desired length in the field. Features two strips of factory installed double sided tape on each 36” piece. Field Installed.
Model Code: WH $80 list price per piece
METAL MODESTY PANEL WIRE MANAGEMENT J-CHANNEL16 gage x 3.5” high x 2.37” deep horizontal J-Channel that hangs on free swinging perforated metal modesty panel. J-Channel simply clips into modesty panel slots, no hardware required. Sits 4.75” below bottom of top. Available in black or silver powder coat. Field Installed.
Model Code: WJ $210 list price per piece
ROUND WIRE MANAGEMENT GROMMET2.5” round abs plastic grommet. Tables are drilled out at factory for correct hole size. Insert and cap ship loose and are easily installed, no hardware required. Field installed.
Model code: GS (silver) or GB (black) $20 list price each
RECTANGLE WIRE MANAGEMENT GROMMET3” x 5.5” flush mount rectangle powder coated steel grommet. Tables are drilled out at factory for correct hole size. Available in black or silver. Easily installed with two screws to hold securely in place. Field installed.
Model code: GVS (silver) or GVB (black) $120 list price
CUSTOMER SPECIFITED HOLE OR SPECIAL SHAPEA custom hole may be specified. A customer supplied template for the hole is required.
Model Code: CNC $250 List set up fee per template
RAILWAY WIRE MANAGEMENTThe Railway Base is the ultimate wire management base, featuring removable doors and opening size to accommodate any size power box or trough, any number of wires or conduit, and floor receptacles.
42
WIRE MANAGEMENT OPTION SPECSAugust 1, 2014 Price List (Rev. A)
CAPITOL WIRE MANAGEMENT The Capitol Base was designed with CPU storage and wire management access in mind. Each unit features hinged doors at each end with an opening of 10.25” wide and 19.5” tall. Inside top edges of the base features 5” wide x 1.5” tall notches to allow pass through of wire(s) from base to base or top to base. Bottom of the base features a 5” x 8” opening to access floor receptacle. Opening at top of base allows a regular power box to be mounted directly over base, larger power boxes should be offset of base or Contact Factory for a customized base quote.
CANYON WIRE MANAGEMENTAll Canyon Bases come standard with two 2” diameter wire management holes located 3” to center of hole from top edge of base, on opposite sides of base to accommodate pass through of wire(s) from base to base or top to base. Optional wire management access door is 8” wide x 10” high and is located starting 2” above bottom of base below one of the wire management holes. Door features a 1” x .75” finger pull and is attached with Velcro to allow easy access of wire(s) and floor receptacle. The 18” bases feature 12” openings in top and bottom and can accommodate up to a regular power box. The 24” bases feature 18” openings in top and bottom and can accommodate up to a Double power box or Mini Oasis.
Model Code: ADCN $300 list price per door for Canyon bases
UNION WIRE MANAGEMENTThe Union Base features our 3” wide four-channel extruded PVC wire management track, flush mounted down center of the panel. End panels feature track running full length of one side of panel - 27”. Center panels feature 21” of track recessed in panel on one side centered below a 13.75” wide x 5.75” high notch for accommodating power boxes. Accommodates all power boxes except for the Poly Through. Factory Installed.
Model Code: WM $100 list price per Union base
TABLE GANGER3.5” diameter 2-piece zinc die-cast table ganger. Simply twist and lock in place. See page 19 for possible configurations and location codes. Sold in sets, which consists of two gangers, four pieces. Attached with #10 x 3/4” screws. Factory installed.
Not available on solid surface table tops or wood edged table tops.Not available on knife edge profiles.
Model code: TG-LOCATION $135 list price per set/table
43
GANGING & SUPPORT OPTION SPECSAugust 1, 2014 Price List (Rev. A)
ANTI-SAG BARS12 gage fabricated steel bar attached to underside of table top. 2” wide, black powder coat finish. Factory installed.
Model code: AS $100 list price each bar*Standard on tower collection 60”, 66”, and 72” tables.
QUICK RELEASE PLATEConstructed of 11 gage heavy duty steel, the 3” x 6” quick release plates are designed for supporting pie/quarter round shaped tops without a base or ganging larger tables. Simply loosen the hand knobs, slide tables together, tighten hand knobs and tops are joined level and secure. The low profile knob eliminates any conflict between the user and the release mechanism. Inserts are factory installed, plate and knobs are field installed. Plate has a black powder coat finish, knobs are rigid molded plastic.
Available on solid surface table tops and wood edged table tops.Not available on knife edge profiles.
Model Code: QR $100 list price each plate
MUTIPLE PIECE TABLESTables in multiple pieces require a field joint. Field joints have routed special shaped cut-outs on bottom of top and a grooved edge and use connector bolts and spline material to join tops together. Spline material is inserted into edge to guide and hold pieces together, the connector bolt is inserted into cut-out and tightened until seam is level and tight. Connector bolt is zinc plated, high carbon steel, 3.5” long, threaded about .75” of its length, with 1” cross pieces. Spline material is .125” hardboard cut in 1”widths and various lengths, dependent on table size. Field Installed.
Model Code: FJ $300 list price each additional joint on tables 10’ and under.*No Up-Charge, standard on tables longer than 10’
FLAT PLATES3” x 6”, .125” thick fixed flat plates are used to provide additional leveling and support on multiple piece tops where there is no base support. Black powder coat finish. Plate, screws, and installation instructions are provided. Field installed.
Model Code: FP $20 list price each plate
CPU HOLDER - FIXED UNIT Securely clamps and holds CPU, steel with black epoxy finish. Height adjustment of 13.375” - 20.5”.
Model Code: C1 - Width adjustment of 5.5” - 9.25” $180 List Price EaModel Code: C2 - Width adjustment of 2.75” - 5.25” $180 List Price Ea
44
OPTION SPECSAugust 1, 2014 Price List (Rev. A)
DIVIDER / PRIVACY PANELS.5” thick clear frosted acrylic panels are 16” high and feature polished edges and through mount hardware. Tops are provided with pre-drilled holes. Assembly instructions are provided. Field Installed.
Model Code: DPA??Replace the ?? with the size of panel to complete the divider panel model code. [ex. DPA36 – is for a 36” long diver panel.]
24” panel $720 list price 48” panel $1385 list price 84” panel $2620 list price30” panel $970 list price 60” panel $1495 list price 96” panel $2625 list price 36” panel $1025 list price 66” panel $1550 list price42” panel $1380 list price 72” panel $1905 list price
CPU HOLDER - SWIVEL UNIT Securely clamps and holds CPU, steel with black epoxy finish. Height adjustment of 13.375” - 20.5”, 360 degrees of swivel and 8.5” of travel provide easy access to connections on the rear of CPU.
Model Code: C3 - Width adjustment of 5.5” - 9.25” $290 List Price EaModel Code: C4 - Width adjustment of 2.75” - 5.25” $290 List Price Ea
COBY APRON BASE - FORMED CLUTCH HOOKSThe Coby apron base features 1” x 1” x 12 gauge formed steel clutch hooks. The hooks are formed ata 45 degree angle and strategically placed dependent on table length. Clutch Hooks come standard with Coby Apron Base tables.
CAPITOL BASE INSERTSCapitol inserts are decorative and functional! Constructed of 18 gauge perforated steel, flush mounted and finished with durable powder coat. See page 5 for available powder coat colors. For additional type of inserts, Contact Factory.
Model Code: DIP $200 list price per base and includes both sides of base
METAL TO METAL CONNECTIONA metal to metal connection is recommended for tables that are dis-assembled and assembled often as the particle board core may weaken and cause stability issues with the bases. 1/4-20 Brass inserts are factory installed and 1/4-20 x 3/4” screws are provided for field installation of bases. Inserts have fins on the outside diameter which provides higher pull-out resistance and prevents splintering and splitting.
Model Code: TI $100 list price per table
45
OPTION SPECSAugust 1, 2014 Price List (Rev. A)
ADD 3RD BASE TO TRAINING TABLEUsed for 84” - 96” long training tables. The option to add a 3rd base is dependent on thenumber and size of chairs being used. Two bases are standard and standard placement is 10”-12” from edge of tops, adding a base reduces the placement of the bases to 6” from each edge with 3rd base placed to allow maximum knee/leg space and keep the integrity of the strength of table.
Model Code: ABGY Pricing found under options for the Gateway collection.ABHR Pricing found under options for the Harbor collection.ABLY Pricing found under options for the Liberty collection.ABSP Pricing found under options for the Supreme collection.
SHARED LEGShared leg may be specified to increase leg space and reduce number of bases. This option is only recommended for stationary tables that have no plan of moving around. Tables will need to be ordered as starter tables and add-on tables in order to predrill tops properly for the bases.
Starter Table Model Code: SSL Pricing found under options for each individual collection.Add-on TablesModel Code: SAL Pricing found under options for each individual collection.
OCCASIONAL HEIGHTBar height is an overall table height of 18”.
Model Code: SCPricing found under options for each individual collection.
BAR HEIGHTBar height is an overall table height of 42”.
Model Code: BHPricing found under options for each individual collection.
CAFE HEIGHTCafe height is an overall table height of 36”. Model
Code: CHPricing found under options for each individual collection.
CUSTOM HEIGHTCustom height is a required height that is shorter than or taller than standard 29” standard height and is not 36” cafe or 42” bar height.
Shorter than standard 29” height - Model Code: SC Taller than standard 29” height - Model Code: TCPricing found under options for each individual collection. Specify overall table height desired. * Standard seat height shown above
RADIUS CORNERSRadius Corners are available in 1”, 2”, 3”, 4” or 5” radius. Due to the limitations of some edge profiles, please consult the factory for edge profile and radius recommendations.
Model Code: RC? Contact Factory for pricing
PUSH BUTTON ADJUSTABLE HEIGHTThe push button adjustable height option is a spring-clip column that allows adjustments in 1” increments. Available in two different ranges and various collections. Available in the following collections: Gateway, Harbor, Liberty, Supreme, and Tower.
Table Height Range: 26” - 35”C’s, T’s, and Post legs Model Code :AHC1, AHT1, AHP1 List Price: $160 each baseX-Base, Supreme only Model Code: AHX1 List Price: $220 each baseTT-Base, Supreme only Model Code: AHTT List Price: $300 each base
Table Height Range: 29” - 42”C’s, T’s, and Post legs Model Code: AHBC1, AHBT1, AHBP1 List Price: $220 each baseX-Base, Supreme only Model Code: AHX1 List Price: $280 each baseTT-Base, Supreme only Model Code: AHTT List Price: $430 each base
46
ADJUSTABLE HEIGHT SPECSAugust 1, 2014 Price List (Rev. A)
HAND CRANK ADJUSTABLE HEIGHTAdjustment at the turn of the handle. Available in the Liberty and the Empire collections
Empire - Screw thread adjustment with infinite stop positions. Adjust with manual crank handle at a rate of 6-1/3 turns per inch (4mm pitch). Table height range of 9.5”, 27.25” - 36.75”. Handle slides under table when not in use. Maximum lifting load of 180 pounds for single column and 225 pounds for two columns, maximum of three (3) columns adjusted from one crank handle. Option for Locking Casters is available which adds 2” to starting height.
Liberty - Adjust with manual crank handle at a rate of 5 turns per inch. Table height range of 13.5”, 27.25” -40.75”. Handle folds when not in use and can be mounted on front of table or on top of table. Maximum lifting load of 150 pounds for single column and 300 pounds for two column units. Custom configurations with up to four (4) legs all adjusting from one crank handle. Call factory with requests. Available options include: Flip top (X-Base only) and Locking Casters. Locking Casters add 2” to starting height.
PNEUMATIC ADJUSTABLE HEIGHTPneumatic adjustment with easy lever release. Available in the Empire Collection only.