TEMPUR® BOX SPRING USER MANUAL
TEMPUR® SPRING BOXBRUGSANVISNING
1 10
Bed without a headboard: Now you are done. You can place your TEMPUR® mattress on the bedframe and enjoy you new TEMPUR® product.
NB: You need two people to install the headboard.
If you have purchased a double bed, then connect the two beds by using the pre-installed connection fittings.
Beds with no headboard have two connectors, one by the head end and one by the foot end.
5 Headboard
Congratulations on becoming a TEMPUR®
owner.
This is a user manual for the TEMPUR® Box Spring. We hope you will enjoy our product just as much as we enjoyed designing it for you.
Bedframe
Legs
Mattress holder*
9 2
Flip the bed down.
Before affixing the mattress holder onto the bed frame, the foot-end of the bed must be elevated. To do this please press the ‘raise the foot-end button” on the remote control.
4 Mattress holder
Manual
Remote controlsAdjustable bed Static bedRemote controls No remote controls
Headboard**
Double bed connector***
What you will need before assembling the Box Spring
List of contents
* Mattress holders are only available for adjustable beds.** Headboard is only available if you have purchased this. *** Is only available for double bed without a headboard.
1) Tempur manual2) Screwdriver3) Two people to assemble the headboard
Før du samler Spring Box, skal du bruge:
Dette følger med Spring Box:
1) Tempur brugsanvisning2) Skruetrækker3) To personer til at samle gavlen
* Madrasstoppere medfølger kun til Spring Box Adjustable** Gavl er tilkøb*** Anvendes kun til en dobbeltseng uden gavl
Madrasstoppere*
Gavl**
Ekstra samlebeslag til hovedende***
Ben Fjernbetjeninger
Sengebund Brugsanvisning
Elevationsseng:Fjernbetjeninger
Planseng: Ingen fjernbetjeninger
TILLYKKE MED DIT TEMPUR® KØB.
Dette er en brugsanvisning til TEMPUR® Spring Box. Vi håber, du nyder
dit produkt ligeså meget, som vi nød at designe det.
3 8
Static bed, with or without headboard: Flip the bed down and go to step 5.
3 How to operate the adjustable feature on your bed?
How to use your remote controla) Inset two AAA (1,5V) batteries. Ensure that the batteries are inserted in the right direction (+/-). b) Close the battery compartment lid.
Both the remote control and the adjustable bed should be operational. If it is not operational, please follow the steps below:
How to sync your remote control with the bed motor (for adjustable beds only)To sync your remote control with the bed motor:
a) First set the remote control back to the factory settings. To do this, press the buttons 1 3 and 5 simultaneously and keep them pres-sed for approx 8 seconds.
b) Press button L on the dual drive for approx 1 second.c) Then press the buttons 1 and 2 on the radio transmitter at the same
time for approx 10 seconds.d) The head-end and foot-end will move briefly to confirm the sync was
successful.
How to enable two single beds to adjust simultaneouslyTo sync your remote control with the two bed motors:
a) Please follow the above steps a-d.b) In addition, press button L on the second dual drive for approx 1
second.c) Then press the buttons 1 and 2 on the remote control at the same
time for approx 10 seconds.d) The head-end and foot-end of the second bed motor will move brie-
fly to confirm that the sync was successful.
3
1
5
2
4
6
Open the box in the room you want to use your TEMPUR® product in. Unpack all the parts and read the user manual.
WARNING: Don´t use a sharp object to open the box.
1) Open the box2) Take all the items out of the box3) Remove the box
Unpacking Leg assembly for beds with no headboard
7 4
Flip the bedframe. So the frame stands on the head-end.
Foot-end
Head-end
Head-end
Head-end
1
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
175
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Double bed
Single bed
Support leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
The leg assembly for the foot end is the same as showed on page 5 and 6.
Use the mounting part in the head-end to keep the two beds together.
How to assemble your TEMPUR® Box Spring
Kassen åbnes i det rum, hvor dit TEMPUR® produkt skal være. Pak alle delene ud og læs denne brugsanvisning.
Rejs sengerammen op, så den står på hovedenden.
ADVARSEL: Brug ikke en skarp genstand til at åbne kassen.
Sådan samler du din TEMPUR® Spring BoxUdpakning
Fodende
Hovedende1) Åbn kassen2) Tag alle delene ud af kassen3) Smid kassen ud
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
5 6
Single bedFloating bed (with no visible legs):
Bed with chrome curved legs:
The legs need to be mounted differently depen-ding on the chosen leg, and whether or not head-board is used.
NB: If you have not ordered a headboard, then the legs need to be placed differently in the head-end, follow the instruction on next page.
3
1097
5
12
14
4
1 2
6
8 11
13
Support leg Chrome edge leg
Chrome curved leg Chrome, oak, wenge, walnut, black square leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
Foot-end
Foot-end
Head-end
Head-end
Double bedFloating bed (with no visible legs):
Bed with chrome curved legs:
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
1
1
11
1
67
1
1
5
1
10
10
14
11
12
11
1510
1312
15
13
1712
17
14
1813
5
6
6
6
2
2
22
2
8
2
2
6
2
6
7
7
7
3
3
3
3
8
3
74
4
4
4
9
9
4
8
11 16
2 Leg assembly for beds with headboard
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
5 6
Single bedFloating bed (with no visible legs):
Bed with chrome curved legs:
The legs need to be mounted differently depen-ding on the chosen leg, and whether or not head-board is used.
NB: If you have not ordered a headboard, then the legs need to be placed differently in the head-end, follow the instruction on next page.
3
1097
5
12
14
4
1 2
6
8 11
13
Support leg Chrome edge leg
Chrome curved leg Chrome, oak, wenge, walnut, black square leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
Foot-end
Foot-end
Head-end
Head-end
Double bedFloating bed (with no visible legs):
Bed with chrome curved legs:
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
1
1
11
1
67
1
1
5
1
10
10
14
11
12
11
1510
1312
15
13
1712
17
14
1813
5
6
6
6
2
2
22
2
8
2
2
6
2
6
7
7
7
3
3
3
3
8
3
74
4
4
4
9
9
4
8
11 16
2Leg assembly for beds with headboard
Benmontering
Benene skal monteres forskelligt alt efter hvilke ben, du har valgt til sengen, og hvorvidt der skal gavl på eller ej.
NB: Hvis du ikke har købt en gavl, skal benene monteres anderledes i hovedenden - følg instruktionerne på næste side.
Støtteben- medfølger
Chrome edge ben- tilkøb
Chrome curved ben- tilkøb
Leg assembly for beds with no headboard
7 4
Flip the bedframe. So the frame stands on the head-end.
Foot-end
Head-end
Head-end
Head-end
1
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
175
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Double bed
Single bed
Support leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
The leg assembly for the foot end is the same as showed on page 5 and 6.
Use the mounting part in the head-end to keep the two beds together.
How to assemble your TEMPUR® Box Spring
Benmontering for dobbeltsenge uden gavl
Benmontering for dobbeltsenge med gavl
Dobbeltseng
Curve eller Edge ben skal sættes på i fodenden som beskrevet på side 5
Brug det ekstra samle- beslag i hovedenden til at holde sengene sammen.
Hovedende
5
14
6
1 2
7 8
3 4
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
5 6
Single bedFloating bed (with no visible legs):
Bed with chrome curved legs:
The legs need to be mounted differently depen-ding on the chosen leg, and whether or not head-board is used.
NB: If you have not ordered a headboard, then the legs need to be placed differently in the head-end, follow the instruction on next page.
3 4
1 2
Support leg Chrome edge leg
Chrome curved leg Chrome, oak, wenge, walnut, black square leg
Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):
Bed with chrome edge legs:14-15-17-18
Bed with chrome curved legs: 17
chrome, oak, wenge, walnut square legs.
14 15 16
17
18
8
4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
Foot-end
Foot-end
Head-end
Head-end
Double bedFloating bed (with no visible legs):
Bed with chrome curved legs:
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
1
1
11
1
67
1
1
5
1
10
10
14
11
12
11
1510
1312
15
13
1712
17
14
1813
5
6
6
6
2
2
22
2
8
2
2
6
2
6
7
7
7
3
3
3
3
8
3
74
4
4
4
9
9
4
8
11 16
2 Leg assembly for beds with headboard
5
14
6
1 2
7 8
3 4
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
5 6
Single bedFloating bed (with no visible legs):
Bed with chrome curved legs:
The legs need to be mounted differently depen-ding on the chosen leg, and whether or not head-board is used.
NB: If you have not ordered a headboard, then the legs need to be placed differently in the head-end, follow the instruction on next page.
3 4
1 2
Support leg Chrome edge leg
Chrome curved leg Chrome, oak, wenge, walnut, black square leg
Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):
Bed with chrome edge legs:14-15-17-18
Bed with chrome curved legs: 17
chrome, oak, wenge, walnut square legs.
14 15 16
17
18
8
4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
Foot-end
Foot-end
Head-end
Head-end
Double bedFloating bed (with no visible legs):
Bed with chrome curved legs:
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
1
1
11
1
67
1
1
5
1
10
10
14
11
12
11
1510
1312
15
13
1712
17
14
1813
5
6
6
6
2
2
22
2
8
2
2
6
2
6
7
7
7
3
3
3
3
8
3
74
4
4
4
9
9
4
8
11 16
2 Leg assembly for beds with headboard
Fodende
Hovedende
Montér evt. 2 stk. Curve eller Edge ben (tilkøb)
Montér støtteben ved tallene fra 1-8.
DOBBELTSENG
Leg assembly for beds with no headboard
7 4
Flip the bedframe. So the frame stands on the head-end.
Foot-end
Head-end
Head-end
Head-end
1
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
175
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Double bed
Single bed
Support leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
The leg assembly for the foot end is the same as showed on page 5 and 6.
Use the mounting part in the head-end to keep the two beds together.
How to assemble your TEMPUR® Box Spring
3 8
Static bed, with or without headboard: Flip the bed down and go to step 5.
3 How to operate the adjustable feature on your bed?
How to use your remote controla) Inset two AAA (1,5V) batteries. Ensure that the batteries are inserted in the right direction (+/-). b) Close the battery compartment lid.
Both the remote control and the adjustable bed should be operational. If it is not operational, please follow the steps below:
How to sync your remote control with the bed motor (for adjustable beds only)To sync your remote control with the bed motor:
a) First set the remote control back to the factory settings. To do this, press the buttons 1 3 and 5 simultaneously and keep them pres-sed for approx 8 seconds.
b) Press button L on the dual drive for approx 1 second.c) Then press the buttons 1 and 2 on the radio transmitter at the same
time for approx 10 seconds.d) The head-end and foot-end will move briefly to confirm the sync was
successful.
How to enable two single beds to adjust simultaneouslyTo sync your remote control with the two bed motors:
a) Please follow the above steps a-d.b) In addition, press button L on the second dual drive for approx 1
second.c) Then press the buttons 1 and 2 on the remote control at the same
time for approx 10 seconds.d) The head-end and foot-end of the second bed motor will move brie-
fly to confirm that the sync was successful.
3
1
5
2
4
6
Open the box in the room you want to use your TEMPUR® product in. Unpack all the parts and read the user manual.
WARNING: Don´t use a sharp object to open the box.
1) Open the box2) Take all the items out of the box3) Remove the box
Unpacking Benmontering for enkeltseng uden gavl
Leg assembly for beds with no headboard
7 4
Flip the bedframe. So the frame stands on the head-end.
Foot-end
Head-end
Head-end
Head-end
1
5
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
175
141311
10
9
16
18
6
1 2
7 8
3 4
12 15
17
Double bed
Single bed
Support leg
5 6
14131211
10
9
15 16
17
18
7 8
1 2 3 4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
The leg assembly for the foot end is the same as showed on page 5 and 6.
Use the mounting part in the head-end to keep the two beds together.
How to assemble your TEMPUR® Box Spring
EnkeltsengHovedende
Støtteben
Sådan anvender du elevationen på sengen:
Planseng - med eller uden gavl:Vend sengen om og gå til trin 5.
Synkroniser fjernbetjeningen med sengens motor (kun for elevationsbunde)For at synkronisere skal du:
Sådan synkroniserer du to enkeltsenge, så de eleverer synkrontFor at synkronisere din fjernbetjening med to-sengs motoren:
Sådan bruger du fjernbetjeningen:a) Indsæt to AAA batterier. Vær opmærksom
på at batterierne vender rigtigt.b) Både fjernbetjeningen og sengebunden
skulle fungere nu. Hvis ikke, følg venligst følgende trin:
a) Nulstille fjernbetjeningen til fabriksindstillingerne. For at gøre det skal du holde knapperne 1, 3 og 5 nede på samme tid i ca. 8 sekunder.
b) Tryk på L knappen på motorenc) Hold derefter knapperne 1 og 2 på
fjernbetjeningen nede i ca. 10 sekunder.d) Hoved- og fodenden vil derefter bevæge sig
kort for at bekræfte, at synkroniseringen var succesfuld.
a) Følg ovenstående trin a-d.b) Derudover skal du trykke på L-knappen på den anden motorc) Tryk derefter på knapperne 1 og 2 på fjernbetjeningen på samme tid
i ca. 10 sekunder.d) Hoved- og fodenden på den anden seng vil elevere kort for at
bekræfte, at synkroniseringen er korrekt.
8
1
3
Ibrugtagen
• Tryk på L knappen på motoren i ca. 1 sekund.
• Tryk på knapperne 1 og 2 på fjernbetjeningen på samme tid og hold dem nede, indtil du kan se, at motoren modtager dit signal og bevæger hoved- og fodenden meget kort.
Hvis synkroniseringsprocessen ikke virkede (hovedenden og fodenden bevægede sig ikke ), gentag da ovenstående proces.
• Gendan fjernbetjeningens fabriksindstillinger ved at trykke på knap 1, 3 og 5 på samme tid i ca. 8 sekunder.
L
2
5
5
14
6
1 2
7 8
3 4
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
5 6
Single bedFloating bed (with no visible legs):
Bed with chrome curved legs:
The legs need to be mounted differently depen-ding on the chosen leg, and whether or not head-board is used.
NB: If you have not ordered a headboard, then the legs need to be placed differently in the head-end, follow the instruction on next page.
3 4
1 2
Support leg Chrome edge leg
Chrome curved leg Chrome, oak, wenge, walnut, black square leg
Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):
Bed with chrome edge legs:14-15-17-18
Bed with chrome curved legs: 17
chrome, oak, wenge, walnut square legs.
14 15 16
17
18
8
4 Support leg
Chrome edge leg
Chrome curved leg
Chrome, oak, wenge, walnut square leg
Floating bed (with no visible legs):2-3-6-7
Bed with chrome edge legs:2-3-9-10-12-13-14-15-17-18
Bed with chrome curved legs: 2-3-10-12-15-17
Bed with chrome, oak, wenge, walnut square legs.2-3-11-15
Foot-end
Foot-end
Head-end
Head-end
Double bedFloating bed (with no visible legs):
Bed with chrome curved legs:
Bed with chrome edge legs:
Bed with chrome, oak, wenge, walnut, black square legs.
1
1
11
1
67
1
1
5
1
10
10
14
11
12
11
1510
1312
15
13
1712
17
14
1813
5
6
6
6
2
2
22
2
8
2
2
6
2
6
7
7
7
3
3
3
3
8
3
74
4
4
4
9
9
4
8
11 16
2 Leg assembly for beds with headboard
Fodende
Hovedende
Bemærk venligst, at Curve eller Edge ben ikke kan monteres på en enkeltseng.
Montér støtteben ved tallene fra 1-4.
ENKELTSENG
1 10
Bed without a headboard: Now you are done. You can place your TEMPUR® mattress on the bedframe and enjoy you new TEMPUR® product.
NB: You need two people to install the headboard.
If you have purchased a double bed, then connect the two beds by using the pre-installed connection fittings.
Beds with no headboard have two connectors, one by the head end and one by the foot end.
5 Headboard
Congratulations on becoming a TEMPUR®
owner.
This is a user manual for the TEMPUR® Box Spring. We hope you will enjoy our product just as much as we enjoyed designing it for you.
Bedframe
Legs
Mattress holder*
9 2
Flip the bed down.
Before affixing the mattress holder onto the bed frame, the foot-end of the bed must be elevated. To do this please press the ‘raise the foot-end button” on the remote control.
4 Mattress holder
Manual
Remote controlsAdjustable bed Static bedRemote controls No remote controls
Headboard**
Double bed connector***
What you will need before assembling the Box Spring
List of contents
* Mattress holders are only available for adjustable beds.** Headboard is only available if you have purchased this. *** Is only available for double bed without a headboard.
1) Tempur manual2) Screwdriver3) Two people to assemble the headboard
Madrasstoppere Gavl
Før du sætter madrasholdere på sengebunden, skal fodenden være eleveret. Dette gøres ved at trykke på knappen med de løftede ben på fjernbetjeningen.
Elever sengen ned.
Hvis du har købt en dobbeltseng, skal du sætte de to sengebunde sammen ved hjælp af de to samlebeslag på hver side af sengen.
Du har nu samlet sengen. Læg din TEMPUR® på bundene og nyd dit nye TEMPUR produkt.
Seng med gavl: I skal være to til at sætte gavlen på.
Seng uden gavl:
Formonterede beslag.