7/29/2019 Tetragonal Crystal System III.pdf
1/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 1/17
The Tetragonal Crystal System (PartThree)
(Alternative name : Quadratic System)
back to Part One
back to Part Two
back to homepage
The Tetragonal-scalenohedric Class
(= Sphenoidic Hemihedric Division) 4* 2 m
This hemihedric is derived from the holohedric Forms by suppressing the main mirror plane (i.e. the horizontal
mirror plane containing the two secondary crystallographic axes) and the two vertical mirror planes, of which
one goes through a secondary axis, and the other goes through the other secondary axis while both contain
the main axis.The symmetry content of this Class is :
Two mirror planes parallel to the faces of the protoprism, i.e. they are vertically oriented and bisect
the angles between the secondary axes.
Three 2-fold rotation axes, coinciding with the crystallographic axes (main axis and secondary axes).
One of these rotation axes is a very special 2-fold axis. Indeed when something possessing this special
axis is rotated 1800 about this axis it will be transformed into itself. Nevertheless the axis is special. It is
even an independent symmetry element, transforming special structures into themselves : A structure
consisting of (a) two upper motifs connected by a(n imaginary) line, and (b) two lower such motifs, butwith their connecting line perpendicular to the first mentioned line (See further down). This special axis
is (accordingly) a 4-fold roto-inversion axis. It consists of a rotation of 900 directly followed by an
inversion through a point on that axis (See below).
http://metafysica.nl/tetragonal_2.htmlhttp://metafysica.nl/tetragonal_1.htmlhttp://metafysica.nl/index_a.htmlhttp://metafysica.nl/tetragonal_2.htmlhttp://metafysica.nl/tetragonal_1.html7/29/2019 Tetragonal Crystal System III.pdf
2/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 2/17
Derivation of the Forms of the Tetragonal-scalenohedric Class
MEROHEDRIC APPROACH.
We will now derive all the Forms of this Class by applying this hemihedric to all the holohedric Forms :
Protopyramid
Deuteropyramid
Ditetragonal BipyramidProtoprism
Deuteroprism
Ditetragonal Prism
Basic Pinacoid
The protopyramid yields two sphenoids, i.e. tetrahedron-like Forms which are however not bounded by
equilateral triangles but by isosceles triangles. See Figure 1.
Figure 1.From the (primary) Protopyramid(P) one can derive two Sphenoids.
The Sphenoid actually shown is generated from a derived Protopyramid(mP).
The deuteropyramid does not change its outer shape, so under this hemihedric it yields again a
deuteropyramid, albeit one of lower symmetry. See Figure 2.
7/29/2019 Tetragonal Crystal System III.pdf
3/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 3/17
Figure 2.Because the suppressed mirror planes are pependicular to the faces of the Deuteropyramid it
will not change its outer shape, but it will loose some symmetry, which will be evident when the crystal
faces are physically examined.
The ditetragonal pyramid yields two tetragonal scalenohedra, which are congruent and only differ by
their orientation. One of them is depicted in Figure 3.
Figure 3. The Ditetragonal Pyramid yields two Tetragonal Scalenohedra. In the Figure one such
Scalenohedron is generated from the unstriped faces. Another one can be derived from the striped
faces.
7/29/2019 Tetragonal Crystal System III.pdf
4/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 4/17
The protoprism (See Figure 7 in Part One) remains, with respect to its external shape, unchanged when this
hemihedric is applied. So we obtain (again) a type I tetragonal prism. But of course its (crystallographic)
symmetry is lowered accordingly. Its Naumann symbol is . See Figure 4.
Figure 4.Protoprism, subjected to the sphenoidic hemihedric. Its external shape remains unchanged.
This prism is drawn as a prism with top and bottom faces for reasons of clarity. These faces do not
belong to the prism.
The deuteroprism (See Figure 9 in Part One) also remains the same with respect to its external shape. So
after this hemihedric is applied we get again a Type II tetragonal prism as a Form of the present Class, but
with lower symmetry. The Naumann symbol is . See Figure 5.
Figure 5. The Deuteroprism does not change its external shape when subjected to the sphenoidic
hemihedric. Also this prism is drawn as a prism with top and bottom faces for reasons of clarity.
The ditetragonal prism (Figure 11 in Part One) also does not change its external shape when this
http://metafysica.nl/tetragonal.html7/29/2019 Tetragonal Crystal System III.pdf
5/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 5/17
hemihedric is applied. We again obtain a ditetragonal prism, but with a lower symmetry than the holohedric
one. The Naumann symbol is . See Figure 6.
Figure 6. The Ditetragonal Prism does not change its extenal shape when subjected to this hemihedric.
For reasons of clarity the prism is drawn as a prism with top and bottom faces.
The Final Form of this Class is the sphenoidic hemihedric basic pinacoid (parallelohedron). It derives from
the holohedric basic Pinacoid (Figure 12 in Part One) by applying the sphenoidic hemihedric to it, resulting
in a Form which consists again of two faces and is, like the prisms, an open Form. See Figure 7.
Figure 7.From the holohedric Basic Pinacoid is derived the sphenoidic hemihedric Basic Pinacoid.
The colored areas of the faces symbolize the suppression of two vertical mirror planes, namely the
ones that together contain the horizontal crystallographic axes (the other two mirror planes bisecting
the angles between these axes) remain. The coloring of the areas also symbolizes the suppression of
the equatorial mirror plane, because below each yellow area of the upper face we find a brown area
7/29/2019 Tetragonal Crystal System III.pdf
6/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 6/17
of the lower face, and below each brown area of the upper face we find a yellow area of the bottom
face.
All these Forms can also engage in forming combinations with each other.
FACIAL APPROACH
We will now derive those same Forms by subjecting the basic faces (compatible with the Tetragonal Crystal
System) one by one to the symmetry operations of the present Class (the Tetragonal-scalenohedric Crystal
Class).
Recall that the basic faces were the following :
a : a : c
a : ~a : c a : na : mc
a : a : ~c
a : ~a : ~c
a : na : ~c
~a : ~a : c
The stereogram of the symmetry elements of the present Class is :
Figure 8. Stereographic projection of the symmetry elements of the Tetragonal-scalenohedric Crystal
Class, and all the face poles of the most general of basic faces (i.e. all the face poles of the most
general Form of the present Class). Solid dots refer to upper face poles (originating from faces above
the equatorial plane of the crystal), small circles denote lower face poles (originating from faces
below the equatorial plane of the crystal).
In the center of this projection we see the symbol for the 4-fold roto-inversion axis. Its operation is : a
rotation of 900 followed by an inversion in a point on that axis, which means that the rotated motif appears (in
virtue of the inversion) precisely at the opposite side of that point (See HERE in the general Essay on theMorphology of Crystals). Besides by the symbol in the figure (a white small ellipse in the center of a black
square) it is also denoted by the sign 4* (In the crystallographic literature the asterisk is replaced by a score
above the 4). In the present case this axis coincides with the main crystallographic axis, which is vertical [ Inthe stereographic projection it is (thought to be) perpendicular to the screen (or
http://metafysica.nl/crystal_classes.html#four-fold7/29/2019 Tetragonal Crystal System III.pdf
7/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 7/17
paper) -- in fact we see the projection of the two points of intersection of the
axis with the projection sphere, one at the north pole, one at the south pole :
these points are subsequently stereographically projected (from below and from
above) onto the center of the projection plane].
The special quality of the 4* axis is evident when we consider the configuration of the motifs of a structure
which has this axis. See Figure 8a.
Figure 8a. The structure a b a' b' contains a vertical 4-fold roto-inversion axis. When we subject this
structure to the axis' operation then a will end up ata' andb will end up atb', but at the same time a'
will end up ata, andb' will end up atb. So the whole structure will be unchanged after the operation,
i.e. the operation of the 4* axis transforms the structure onto itself, which is equivalent to saying that
the structure has 4* symmetry.
The operation of this same axis can also be considered as a rotation of 900 directly followed by a
reflection in the equatorial plane. One can check in the Figure that the same effect will result: The
structure will be transformed onto itself.
It is evident that also a rotation of 1800 about that axis will transform the structure onto itself, so we
have to do with a special 2-fold rotation axis.
Further we see, in the stereogram (Figure 8), two horizontal 2-fold rotation axes perpendicular to each other,
and indicated by two small solid ellipses for each axis connected by a dashed line (if this line were solid than
such a line would indicate a vertical mirror plane in which the axis lies). Next we see two vertical mirror
planes, represented by solid lines. They bisect the angles between the 2-fold rotation axes. The circumferenceof the projection plane is dashed, which means that the projection plane is not (also) a mirror plane.
We are now ready to successively derive the Forms of the present Class by subjecting the above listed basic
faces one by one to the symmetry elements of the Class. Because these symmetry elements are indicated in
the stereogram (Figure 8), we can insert a face in that stereogram (i.e. we can insert the projection of a face
pole -- representing the face concerned -- into the stereogram) and see what happens when we let the
symmetry elements do their work on it.
We start with the face a : a : c.
Its position in the stereogram is indicated by a red dot in Figure 9.
7/29/2019 Tetragonal Crystal System III.pdf
8/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 8/17
Figure 9. The position of the (projected) face (pole) a : a : c in the stereogram of the symmetry
elements of the Tetragonal-scalenohedric Crystal Class is indicated by a red dot.
Also indicated (black dots and small circles) are all the face poles representing the (complete) Form
generated from the general facea : na : mc, in order to clearly see the effect of the symmetry
elements. Dots represent upper faces, small circles represent lower faces.
It is a face that is not perpendicular to any crystallographic axis. It is the unit face for the Tetragonal Crystal
System, and can be seen as the upper right front face of a tetragonal bipyramid. When subjected to the 4*
axis, a copy of it is rotated 900 clockwise about the axis, in this case (rotated) about the main crystallographic
axis, and then inverted through the origin of the system of crystallographic axes, the result will be a lower face.
When this latter face is in turn subjected to the 4* axis, i.e. be rotated 900 and then inverted through the
origin, the result will be another upper face. Subjecting this face in turn to the 4* axis will generate another
lower face. When we finally subject this face in turn to the 4* axis we will obtain a face which we already
had, namely our initial face.
The configuration of faces so obtained, is a sphenoid (Figure 1) (also called a disphenoid). The mirror planes
and the 2-fold rotation axes are implied by the 4* axis if the four motifs involved are themselves
symmetric. The 4* axis itself (see Figure 8a) does not demand such a symmetry of the motifs. When indeed
the motifs are themselves symmetric then their configuration according to the 4* axis looks as in the next
Figure, and this configuration complies with the symmetry content of the present Class :
Figure 8b.A configuration of symmetrical motifs according to a 4-fold roto-inversion axis.
7/29/2019 Tetragonal Crystal System III.pdf
9/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 9/17
Because of the symmetry of the motifs themselves, additional symmetries (for the whole object,
consisting of four motifs) are generated (i.e. implied), namely two mirror planes, one that goes
through a' b' cand one that goes through a b c', and two 2-fold rotation axes, going through the
inversion point, one lying in the plane f g c and the other in the plane h i c [If we rotate the
whole object vertically by 450 then we get the same orientation of the symmetry
elements as depicted in the corresponding stereographic projection ].
Let us develop in stages the stereographical projection of the resulting (sphenoidic hemihedric) sphenoidin the next Figures. We'll start with the stereographic projection of the initial face, namely the face a : a : c:
Figure 9a.Position of the face (pole) a : a : c in the stereographic projection of the symmetry elements
of the Tetragonal-scalenohedric Crystal Class.
[We do not depict here, as in the next three Figures, the face poles of thecomplete general Form (which were after all only included for reasons of clarity
with respect to the workings of the symmetry elements of the Class which could
then easily be read off from their configuration ].
From the initial face a second face is generated, see Figure 9b.
Figure 9b. Stereogram of the initial face a : a : c and of the second generated face, generated by the
action of the 4* axis.
A dot represents an upper face, a small circle a lower one.
In generating this second face by the action of the 4* axis we rotatate it 900 clockwise about the axis
(which coincides with the crystallographic main axis) and then invert it through the inversion point
(the middle of the crystallographic main axis). This results in a lower face, meaning that its face polelies on the lower hemisphere of the projection sphere (and is (then) upwardly projected, i.e. it is
projected from below, onto the projection plane).
7/29/2019 Tetragonal Crystal System III.pdf
10/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 10/17
Next we will generate the third face. See Figure 9c.
Figure 9c. When we rotate the above generated lower face (small red circle) 900 clockwise about the
main crystallographic axis and then invert it through the inversion point, a third face is generated,
which is an upper face.
Next we will generate the fourth face. See Figure 9d.
Figure 9d. When we rotate this third face (red dot in the upper left quadrant of the stereographic
projection of Figure 9c) clockwise 900 about the main crystallographic axis and then invert it through
the inversion point, then a fourth face, a lower face, will be generated.
When we repeat this operation on that fourth face we'll get the first face (the initial face) again. So no new
faces are obtained anymore by further repeating the operation of the 4* axis. The Form thus obtained,
consisting of four faces, is the Sphenoid.
The face a : ~a : c (indicated in Figure 10) is parallel to the east-west crystallographic axis, and makes anangle with the main axis.
7/29/2019 Tetragonal Crystal System III.pdf
11/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 11/17
Figure 10.Projection (red dot) of the face (pole) a : ~a : cin the stereogram of the Tetragonal-scalenohedric Class (The face poles of the general Form are also indicated).
Because some symmetry elements imply others we do not have to involve all the symmetry elements when we
derive a Form from a face. But of course the Form so derived must comply with all the symmetry elements of
the Class.So let us see what Form derives from the face a : ~a : c.The nearest 2-fold rotation axis (vertical in Figure 10) will generate a second face, which meets the initial face
from below. One mirror plane will duplicate this pair and the other mirror plane will duplicate the result. So
we will end up with a tetragonal bipyramid which has an orientation such that it belongs to type II (See
Figure 2).
The stereographic projection of this type II (sphenoidic hemihedric) tetragonal bipyramid is depicted in
Figure 10a.
Figure 10a. Stereogram of the Type II (sphenoidic hemihedric) Tetragonal Bipyramid.
The face a : na : mc is the general face. Its position in the stereographic projection is depicted in Figure 11.
7/29/2019 Tetragonal Crystal System III.pdf
12/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 12/17
Figure 11. Stereogram of the symmetry elements of the Tetragonal-scalenohedric Class, and the
position of the face a : na : mc (red dot).
The nearby mirror plane will generate a second face, making an angle with the initial face. When we subject
this pair to the 4-fold roto-inversion axis, we will obtain a tetragonal scalenohedron (Figure 3).
We can develop its stereographic projection in the same way as we did with respect to the sphenoid,
according to the next Figures :
Figure 11a.In virtue of the nearby mirror plane the initial face is duplicated, resulting in an upper face
pair.
Figure 11b. (A copy of) this upper face pair is now subjected to the 4* axis, which means that it is
rotated clockwise 900 about the main crystallographic axis and then inverted through the origin of
the system of crystallographic axes. This results in a second face pair, a lower face pair.
7/29/2019 Tetragonal Crystal System III.pdf
13/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 13/17
Figure 11c. When we subject this latter face pair in turn to the 4* axis we will rotate (a copy of) it
clockwise 900 and invert it through the origin of the crystallographic axes resulting in a third face
pair, an upper face pair.
Figure 11d. When we, finally do the same with the latter face pair we will obtain a fourth face pair.Further repetition of these operations does not yield new faces anymore. These four face pairs
together form the Tetragonal Scalenohedron of which the stereogram is depicted here.
The face a : a : ~c (See Figure 12) is vertically oriented. It appears therefore in the stereographic projectionat the periphery of the projection plane. It cuts off equal pieces of the horizontal crystallographic axes.
Figure 12.Position of the face (pole) a : a : ~c in the stereographic projection of the symmetryelements of the Tetragonal-scalenohedric Crystal Class (I have not indicated the multiplication of thepole of the general face a : na : mcanymore, which had served earlier to show the workings of the
symmetry elements more clearly, because these workings will by now be clear to the reader from
inspecting just the stereogram of the symmetry elements only).
7/29/2019 Tetragonal Crystal System III.pdf
14/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 14/17
The face is not affected by the mirror plane that is perpendicular to it. But the other mirror plane duplicates it.
So we have now two parallel faces. When we next apply to this face pair the 4-fold roto-inversion axis (4*) a
copy of each face is turned 900 about that axis and immediately inverted through the origin of the
crystallographic axes, resulting in new opposite lower faces. But because these 'lower' faces are vertical they
are identical with their upper counterparts, i.e. with their upwardly directed extensions. So the result is a
tetragonal prism of type I (Figure 4), but of course having a lower symmetry than the holohedric
protoprism.
Because the effect of the 4-fold roto-inversion axis is equivalent to a rotation of 900 directly followed by a
reflection with respect to a horizontal (equatorial) mirror plane (notice that this plane, all byitself, is not a symmetry element of the present Class, only its combination with
a 4-fold axis exists as such a symmetry element), we can also visualize the generation of the
tetragonal prism in the following way :
A copy of the parallel face pair (generated as described) is turned 900 and then directly reflected with respect
to the mentioned equatorial mirror plane. Because the faces are vertical this reflection will not affect them, and
we now already possess the prism.
The stereographic projection of the (sphenoidic hemihedric) type I tetragonal prism is depicted in Figure
12a.
Figure 12a. Stereogram of the (sphenoidic hemihedric) type I Tetragonal Prism.
The face a : ~a : ~c is vertical and is parallel to the east-west crystallographic axis. Its stereographicprojection is located at the periphery of the projection plane as figure 13 indicates.
Figure 13. Stereogram of the face (pole) a : ~a : ~c (red dot).
One mirror plane duplicates this face resulting in a pair of faces making an angle (smaller than 180 0) with each
other. The other mirror plane duplicates this pair resulting in a tetragonal prism of type II.
7/29/2019 Tetragonal Crystal System III.pdf
15/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 15/17
The stereographic projection of the (sphenoidic hemihedric) Type II tetragonal prism is depicted in
Figure 13a.
Figure 13a. Stereogram of the Type II Tetragonal Prism.
The face a : na : ~c is vertical. It cuts off unequal pieces from the horizontal axes.n (like in the case of the face a : na : mc) can vary between 1 and infinity. Its position in the stereographic
projection of the symmetry elements of the present Class is depicted in Figure 14.
Figure 14. Stereogram of the face (pole) a : na : ~c, and of the symmetry elements of the Tetragonal-scalenohedric Crystal Class.
This face is duplicated by one of the mirror planes resulting in two faces making an angle. This pair is rotated
90
0
and reflected with respect to the equatorial plane. But because this reflection has no effect the axis workslike an ordinary 4-fold rotation axis and multiplies the face pair four times, resulting in a (sphenoidic
hemihedric) ditetragonal prism. Its stereographic projection is pictured in Figure 14a.
7/29/2019 Tetragonal Crystal System III.pdf
16/17
06/02/13 Tetragonal Crystal System III
metafysica.nl/tetragonal_3.html 16/17
Figure 14a. Stereogram of the (sphenoidic hemihedric) Ditetragonal Prism.
Finally the face ~a : ~a : c is horizontally oriented, so its stereographic projection will place it in the centerof the projection plane, as indicated in Figure 15.
Figure 15.Position of the face (pole) (red dot in the center) ~a : ~a : cin the stereogram of thesymmetry elements of the Tetragonal-scalenohedric Crystal Class.
The mirror planes have no effect on that face, but the 2-fold rotation axes generate a second face parallel to
the initial one. The 4-fold roto-inversion axis has the same effect, its operation can be described by either a
rotation of 900 directly followed by an inversion, or a rotation of 900 directly followed by a reflection in the
equatorial plane. Following this last prescription we observe that the rotation does not have an effect upon the
face, but the reflection will, and so a second face is generated parallel to the initial one. This pair of faces is
called a basic pinacoid. Its stereographic projection is the same as the one in Figure 15, but in this case there
are two projections superposed upon each other, one from above and one from below. See Figure 15a.
Figure 15a. Stereogram of the sphenoidic hemihedric Basic Pinacoid.
Red dot: upper face. Red (small) circle : lower face.
This concludes our exposition of the Tetragonal-scalenohedric Crystal Class.
To continue, klickHERE for Part Four.back to Part One
back to Part Two
http://metafysica.nl/tetragonal_2.htmlhttp://metafysica.nl/tetragonal_1.htmlhttp://metafysica.nl/tetragonal_4.html7/29/2019 Tetragonal Crystal System III.pdf
17/17
06/02/13 Tetragonal Crystal System III
back to homepage
****************
http://metafysica.nl/index_a.html