O
TTO TTO
TTO T
TO TTO
O TTO T
TO TTO T
TO
TTO TTO T
TO TTO T
TO TTO
TTO T
TO TTO T
TO TTO T
TO TT
TO TTO T
TO TTO T
TO TTO T
TO T
TO TTO T
TO TTO T
TO TTO T
TO
TO TTO T
TO TTO T
TO TT
TO TTO T
TO TTO
T
TO TTO T
TO
TO TT
ANELLI DI TENUTASHAFT SEALS
LISTINO PREZZI - PRICE LIST1.1.10
Politica ambientaleIl presente Catalogo Tecnico TTO® è stato realizzato con materiale ecologico certifi cato FSC.Il processo produttivo della carta avviene attenendosi alle vigenti normative: DS/EN ISO 14001 e ISO 9001:2000.La plastifi cazione della copertina è avvenuta utilizzando materiale biodegradabile; gli inchiostri per la stampa sono a base vegetale.Per cortesia, continuate nel Vostro impegno costante per la salvaguardia dell’ambiente.
Environmental policyThis TTO® Technical Catalogue has been produced with 100% ecological material certifi ed FSC.Manufacturing process follows the regulations in force: DS/EN ISO 14001 and ISO 9001:2000.Plasticization of the cover page has been achieved using biodegradable materials, inks used are vegetable based. Please continue your actions in order to protect the environment and recycle properly.
40.000 mq. interamente dedicati alla produzione40.000 smq. of manufacturing area
16.000 stampi disponibili16.000 available tools
Per ulteriori informazioni tecniche sui prodotti, potete richiedere il catalogo
For further technical information about the products, please ask for catalogue
UFFICIO COMMERCIALESALES DEPARTMENT
MAGAZZINOWAREHOUSE
SEDE PRINCIPALEHEAD OFFICE2.500 mq.
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR
OT Seals S.r.l. - Technical ProductsVia Pitagora, 1 - 42048 Rubiera (Reggio Emilia) ITALIA
Tel. 0039 0522 622711 - Fax 0039 0522 622707
i n f o @ o t s e a l s . i t - w w w.otseals.it
Anelli di tenutaShaft seals
Prodotti tecniciTechnical products
Guarnizioni HELICOFLEXper alte pressioni
e alte temperatureHELICOFLEX sealsfor high pressure
and high temperature
Guarnizioni PTFEPTFE packings
CHEMRAZ® - FLUORAZ®
O-Ring per impieghi incondizioni estremeO-Ring for extreme
applications
Anelli in elastomeroincapsulati FEP
FEP encapsulated elastomer O-Rings
Anelli di tenuta*Anelli di tenuta per bussole di scorrimento*
Tappi di chiusura*Shaft seals*
Seals for sliding ball bushing*
End Covers*
Anelli di tenutaspeciali*
Special shaft seals*
Anelli raschiatoriper steli
Wiper sealsfor rods
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR
Anelli V-ringper alberi rotanti*
V-ring seals for rotating shafts*
Guarnizioni per pneumatica*
Pneumatic packings*PROTE ®
Anelli di tenuta per Giunti / Prese di forza / Riduttori /Macchine
agricole / EolicoShaft seal for
Couplings / Power take-off s / Final drives / Agricultural machines /
Wind-energy
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR
Guarnizioni PTFE O-Rings
PTFE packings O-Rings
Guarnizioni a labbro in
elastomero per oleodinamica/
pneumaticaElastomer u-packings
for hydraulic/pneumatic
Guarnizioni in poliuretano per
oleodinamicaPolyurethane packings for
hydraulic
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR
O-Rings stampati/giuntati a caldo
Tondini per applicazioni
statiche/dinamiche*Moulded/hot
vulcanizedo-rings
Cords for static/dynamic applications*
O-Rings metallici e C-Rings*
Metal O-Ringsand C-Rings*
Tenute meccanicheMechanical
seals
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR
AntivibrantiParticolari gomma/
metallo per vibrazioni/rumori
Antivibrations mounts
Rubber/metal parts for vibrations/noise
CHEMRAZ ® -FLUORAZ ®
O-Rings per impieghi in
condizioni estreme*O-Rings for extreme
applications*
Guarnizioni HELICOFLEX per
alte pressioni e alte temperature*
HELICOFLEX for high pressure and high
temperature*
DISTRIBUTORE EUROPEO - EUROPEAN DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR
Guarnizioni PTFE per alberi rotanti*
PTFE packingsfor rotating
shafts*
Guarnizioni PTFE con molla
energizzata per alte pressioni*
PTFE energized packings for high
pressure*
Anelli in elastomero incapsulati FEP*FEP encapsulated
elastomerO-Rings*
DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR DISTRIBUTORE AUTORIZZATO - AUTHORIZED DISTRIBUTOR
* Per ulteriori informazioni, potete richiedere il Catalogo Tecnico, disponibile anche on line: www.otseals.it
* For further information, please ask for the Technical Catalogue, also available on line: www.otseals.it
OMNI LIP OMNI SEALS
Programma Generale di VenditaGeneral Sales Program
5
LISTINO PREZZI - PRICE LIST
Il presente Listino Prezzi TTO® Anelli di tenuta 1.1.10, annulla e sostituisce i precedenti listini prezzi della stessa categoria. La decorrenza del presente, è valida per tutti gli ordini evasi dal 1.1.2010; ed i prezzi in esso riportati sono da intendersi validi fi no alla prossima revisione e/o aggiornamento del presente Listino Prezzi.All’interno sono riportati i prodotti più comunemente utilizzati nell’industria; per l’assortimento e la disponibilità d’ulteriori prodotti non presenti nel Listino, Vi preghiamo di contattare il Vs. Distributore Autorizzato preferenziale più vicino a Voi. Avendo prestato la massima attenzione ed accuratezza nella stesura del presente Listino Prezzi, speriamo di aver realizzato uno strumento valido e profi cuo nello svolgimento delle Vs. attività commerciali.
This TTO® shaft seals units Price List 1.1.10, cancels and substitutes all previous price lists of the same category. This Price List is in force all orders shipped after the 1st January 2010, and the prices are valid until the next review and/or update.This Price List includes all items most frequently used in the industry; for range and availability of products not included, please contact the closest Authorised Distributor. We have paid our outmost attention in the preparation of this Price List and hope, therefore, to have worked out a valid and useful instrument for your commercial activities.
Distributore / Distributor
Non saranno evasi ordini con importi inferiori a € 50,00 al netto degli sconti.Minimum invoice value € 50,00 (transport cost excluded).
6
CaratteristicheCharacteristics
Anelli di tenuta / Shaft sealsS
Singolo labbroSingle lip
TDoppio labbro
Double lipCaratteristiche / Characteristics
SCAnello di tenuta di impiego universale, parte metallica esterna ricoperta in gomma. (Rif. DIN 3760 tipo “A”).Shaft seal with rubber covered O.D. (Ref. DIN 3760 “A” type)
TCAnello di tenuta come per il tipo “SC” ma con labbro parapolvere.(Rif. DIN 3760 tipo “AS”).Shaft seal as above with an auxiliary lip with provides protection against dirts. (Ref. DIN 3760 “AS” type)SC TC
SBAnello di tenuta con parte metallica scoperta, da utilizzare in sedi con lavorazioni precise. Copertura in gomma della parte interna.Shaft seal, metal O.D. to be fitted on housing bore with tight tolerances, with fluid side covered with rubber.
TB Anello di tenuta come per il tipo “SB” ma con labbro parapolvere.Shaft seal as “SB” type but an auxiliary lip provides protection against dirt.
SB TB
SB2Anello di tenuta con parte metallica scoperta, da utilizzare in sedi con lavorazioni precise. Minor costo in caso di impiego di mescola pregiata.Shaft seal, metal O.D. to be fitted on housing bore with tight tolerances. Cost advantage if special compounds are used.
TB2Anello di tenuta come per il tipo “SB2” ma con labbro parapolvere.Shaft seal as “SB2” type but an auxiliary lip provides protection against dirt.
SB2 TB2
SCWAnello di tenuta come per il tipo “SC” con diametro esterno ondulato.Shaft seal like “SC” type with waves on rubber.
TCWAnello di tenuta come per il tipo “TC” con diametro esterno ondulato.Shaft seal like “TC” type with waves on rubber.
SCW TCW
SBCAnello di tenuta simile al tipo “SB” con diametro esterno parzialmente ricoperto in gomma.Shaft seal similar to “SB” type with O.D. partially covered with rubber.
TBCAnello di tenuta simile al tipo “TB” con diametro esterno parzialmente ricoperto in gomma.Shaft seal similar to “TB” type with O.D. partially covered with rubber.SBC TBC
SBCWAnello di tenuta come per il tipo “SBC” con gomma ondulata.Shaft seal as “SBC” type with waves on rubber.
TBCWAnello di tenuta come il tipo “TBC” con gomma ondulata.Shaft seal as “TBC” type with waves on rubber.
SBCW TBCW
SCVAnello di tenuta per alta pressione fino a 3 BAR.Shaft seal for high pressure up to 3 BAR.
TCVAnello di tenuta per alta pressione fino a 3 BAR con labbro parapolvere.Shaft seal for high pressure up to 3 BAR with lip protection against dirt.
SCV TCV
SCPAnello di tenuta per alta pressione fino a 10 BAR.Shaft seal for high pressure up to 10 BAR.
TCPAnello di tenuta per alta pressione fino a 10 BAR con labbro parapolvere.Shaft seal for high pressure up to 10 BAR with lip protection against dirt.
SCP TCP
SCHPAnello di tenuta per alta pressione fino a 100 BAR.Shaft seal for high pressure up to 100 BAR.
TCHPAnello di tenuta per alta pressione fino a 100 BAR con labbro parapolvere.Shaft seal for high pressure up to 100 BAR with lip protection against dirt.SCHP TCHP
7
CaratteristicheCharacteristics
Anelli di tenuta / Shaft sealsS
Singolo labbroSingle lip
TDoppio labbro
Double lipCaratteristiche / Characteristics
HSCLAnello di tenuta con rigature in rilievo per rotazione albero sinistro.Shaft seal with helical design for left twist.
HSCRAnello di tenuta con rigature in rilievo per rotazione albero destro.Shaft seal with helical design for right twist.
HSCL HSCR
SCIAnello di tenuta con rigature in rilievo per albero rotazione bidirezionale.Shaft seal with helical design for bi-directional design.
SCIV
Labbro singoloSingle lip (w/o)
KDoppio labbro
Double lip (w/o)Caratteristiche / Characteristics
VCAnello di tenuta con labbro senza molla.Shaft seal without spring.
KC Anello di tenuta come per il tipo “VC” ma con labbro parapolvere supplementare.Shaft seal like “VC” type with an auxiliary lip with provides protection against dirt.VC KC
VBAnello di tenuta con labbro senza molla e parte metallica scoperta.Shaft seal without spring lip and metal O.D..
KB Anello di tenuta come per il tipo “VB” ma con labbro parapolvere supplementare.Shaft seal like “VB” type with an auxiliary lip with provides protection against dirt.VB KB
VCWAnello di tenuta con labbro senza molla con superfice esterna ondulata.Shaft seal without spring lip with waves on rubber.
KCWAnello di tenuta come per il tipo “VCW” ma con labbro parapolvere supplementare.Shaft seal like “VCW” type with an auxiliary lip with provides protection against dirt.VCW KCW
VB2Anello di tenuta con labbro senza molla. Parte metallica completamente scoperta. Minor costo in caso di utilizzi mescola speciale.Shaft seal without spring and metal L.O.D. it allows cost advantages if special compounds are used.
VB2
VBR
Anello di tenuta come per il tipo “VB” con maggiore copertura interna della parte metallica. Utilizzato quando il fluido da ritenere non deve essere a contatto col metallo.Shaft seal like “VB” type with thicker internal rubber layer, it is used when the contact between fluid and metl must be avoided.
VBR
Tappi di chiusura / End cover
Caratteristiche Characteristics
ECTappi di chiusura.End cover.
ECWTappi di chiusura con superfice esterna ondulata.End cover with waves on rubber.EC ECW
ECYTappi di chiusura flangiati.Flanged end cover.
ECY
8
V-RingCaratteristiche / Characteristics
VAAnello in gomma per tenuta frontale su alberi rotantiRubber seal for rotating shaft for frontal protection.
VSAnello in gomma con base conica per tenuta frontale su alberi rotanti.Cone-shaped rubber seal.
VA VS
VLAnello in gomma per tenuta frontale su alberi rotanti.Rubber seal for rotating shaft for frontal protection.
VL
Raschiatori / WipersCaratteristiche / Characteristics
DSIRaschiatore in elastomero.Elastomer wiper.
GARaschiatore in elastomero con armatura metallica esterna.Elastomer wiper with metal O.D.DSI GA
GCRaschiatore in elastomero con armatura metallica interna.Elastomer wiper with metal I.D.
GC
Bonded sealsCaratteristiche / Characteristics
BO-1Rondella di tenuta.Self-sealing washers.
BO-1
Pistoni pneumatici / Pneumatic pistons
Caratteristiche / Characteristics
PKCPistone pneumatico completo con canali di ventilazione.Complete pneumatic piston with ventilation grooves.
PKC
CaratteristicheCharacteristics
Confezione di vendita mescola NBR/FPM / Sale packages compound NBR/FPM
Fino a Ø esterno / Up to O.D. 34 mm 100 pz.
da / from 35 a 100 mm 20 pz.
da / from 101 a 199 mm 10 pz.
da / from 200 in poi / on a richiesta / on request
9
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 6,00 12,00 4,50 1,342SC 6,00 15,00 4,00 1,342SC 6,00 15,00 7,00 1,342TC 6,00 16,00 6,00 1,409SC 6,00 16,00 7,00 1,342TC 6,00 19,00 7,00 1,409SC 6,00 22,00 7,00 1,342TC 6,00 22,00 7,00 1,409SC 7,00 15,00 5,00 1,342SC 7,00 16,00 7,00 1,342TC 7,00 22,00 7,00 1,409TC 7,93 19,05 6,40 1,409SC 8,00 14,00 4,00 1,342SC 8,00 16,00 5,00 1,342SC 8,00 16,00 6,00 1,342SC 8,00 16,00 7,00 1,342TC 8,00 16,00 7,00 1,409SC 8,00 18,00 5,00 1,342TC 8,00 18,00 6,00 1,409TC 8,00 20,00 5,00 1,409SC 8,00 22,00 7,00 1,342TC 8,00 22,00 7,00 1,409SC 8,00 24,00 7,00 1,342SC 8,00 25,00 7,00 1,342TC 8,00 25,00 7,00 1,409TC 9,00 19,00 7,00 1,409TC 9,00 22,00 7,00 1,409TC 9,00 24,00 7,00 1,409SC 9,00 26,00 7,00 1,342TC 9,00 30,00 7,00 1,409SC 10,00 16,00 4,00 1,342SC 10,00 18,00 4,00 *TC 10,00 18,00 4,00 1,409SC 10,00 19,00 7,00 1,342TC 10,00 19,00 7,00 1,409SC 10,00 20,00 4,00 1,342SC 10,00 20,00 6,00 1,342TC 10,00 22,00 4,00 1,409TC 10,00 22,00 6,00 1,409SC 10,00 22,00 7,00 1,342TC 10,00 22,00 7,00 1,409TC 10,00 24,00 6,00 1,409SC 10,00 24,00 7,00 1,342TC 10,00 24,00 7,00 1,409SC 10,00 26,00 5,50 1,342SC 10,00 26,00 7,00 1,342TC 10,00 26,00 7,00 1,409SC 10,00 28,00 7,00 1,342SC 10,00 30,00 7,00 1,342TC 10,00 30,00 7,00 1,409TC 11,00 17,00 4,00 1,409SC 11,00 18,00 4,00 1,342
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 14,00 28,00 7,00 1,409SC 14,00 30,00 4,00 1,342SC 14,00 30,00 7,00 1,342TC 14,00 30,00 7,00 1,409TC 14,00 32,00 7,00 1,503TC 14,00 35,00 7,00 1,503TC 15,00 22,00 5,00 1,409SC 15,00 24,00 4,00 1,342SC 15,00 24,00 5,00 1,342TC 15,00 24,00 5,00 1,409TC 15,00 24,00 6,00 1,409SC 15,00 24,00 7,00 1,342TC 15,00 24,00 7,00 1,409SC 15,00 25,00 5,00 1,342TC 15,00 25,00 5,00 1,409SC 15,00 25,00 7,00 1,342TC 15,00 25,00 7,00 1,409TC 15,00 25,40 7,00 1,409SC 15,00 26,00 4,00 1,342SC 15,00 26,00 7,00 1,342TC 15,00 26,00 7,00 1,409TC 15,00 27,00 7,00 1,409SC 15,00 28,00 5,00 1,342SC 15,00 28,00 6,00 1,342TC 15,00 28,00 6,00 1,409SC 15,00 28,00 7,00 1,342TC 15,00 28,00 7,00 1,409SC 15,00 30,00 4,50 1,342SC 15,00 30,00 5,00 1,342SC 15,00 30,00 7,00 1,342TC 15,00 30,00 7,00 1,409TC 15,00 30,00 8,00 1,409SC 15,00 30,00 10,00 1,342TC 15,00 32,00 5,00 1,503SC 15,00 32,00 7,00 1,432TC 15,00 32,00 7,00 1,503TC 15,00 35,00 5,00 1,503TC 15,00 35,00 6,00 1,503SC 15,00 35,00 7,00 1,432TC 15,00 35,00 7,00 1,503TC 15,00 35,00 10,00 1,503TC 15,00 37,00 7,00 1,785SC 15,00 40,00 10,00 1,654SC 15,00 42,00 7,00 1,849TC 15,00 42,00 7,00 1,942SC 16,00 22,00 4,00 1,342SC 16,00 24,00 4,00 1,342SC 16,00 24,00 5,00 1,342SC 16,00 24,00 7,00 1,342TC 16,00 25,00 5,00 1,409SC 16,00 26,00 5,00 1,342TC 16,00 26,00 5,00 1,409
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 11,00 22,00 7,00 1,342TC 11,00 22,00 7,00 1,409SC 11,00 26,00 7,00 1,342SC 12,00 19,00 5,00 1,342TC 12,00 19,00 5,00 1,409SC 12,00 20,00 5,00 1,342TC 12,00 20,00 5,00 1,409SC 12,00 22,00 4,00 1,342SC 12,00 22,00 5,00 1,342TC 12,00 22,00 5,00 1,409SC 12,00 22,00 6,00 1,342TC 12,00 22,00 6,00 1,409SC 12,00 22,00 7,00 1,342TC 12,00 22,00 7,00 1,409SC 12,00 24,00 4,50 1,342SC 12,00 24,00 5,00 1,342SC 12,00 24,00 6,00 1,342SC 12,00 24,00 7,00 1,342TC 12,00 24,00 7,00 1,409SC 12,00 25,00 4,50 1,342SC 12,00 25,00 7,00 1,342TC 12,00 25,00 7,00 1,409SC 12,00 26,00 4,50 1,342SC 12,00 26,00 6,00 1,342TC 12,00 26,00 7,00 1,409SC 12,00 26,00 8,00 1,342TC 12,00 26,00 8,00 1,409SC 12,00 28,00 7,00 1,342TC 12,00 28,00 7,00 1,409SC 12,00 30,00 7,00 1,342TC 12,00 30,00 7,00 1,409SC 12,00 32,00 7,00 1,432TC 12,00 32,00 7,00 1,503TC 12,00 35,00 7,00 1,503TC 12,00 37,00 7,00 1,785TC 13,00 25,00 7,00 1,409SC 13,00 30,00 8,00 1,342SC 14,00 20,00 5,00 1,342SC 14,00 22,00 4,00 1,342TC 14,00 22,00 4,00 1,409SC 14,00 22,00 6,00 1,342TC 14,00 22,00 7,00 1,409TC 14,00 24,00 4,00 1,409SC 14,00 24,00 5,00 1,342TC 14,00 24,00 5,00 1,409SC 14,00 24,00 6,00 1,342TC 14,00 24,00 6,00 1,409SC 14,00 24,00 7,00 1,342TC 14,00 24,00 7,00 1,409SC 14,00 25,00 5,00 1,342TC 14,00 25,00 7,00 1,409TC 14,00 28,00 7,00 1,409
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
* Disponibile su richiesta Available on request
10
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 16,00 26,00 6,00 1,409TC 16,00 26,00 7,00 1,409SC 16,00 28,00 7,00 1,342SC 16,00 28,00 7,00 1,342TC 16,00 28,00 7,00 1,409SC 16,00 30,00 5,00 1,342TC 16,00 30,00 5,00 1,409SC 16,00 30,00 7,00 1,342TC 16,00 30,00 7,00 1,409SC 16,00 32,00 7,00 1,432TC 16,00 32,00 7,00 1,503SC 16,00 35,00 7,00 1,432TC 16,00 35,00 7,00 1,503SC 16,00 35,00 8,00 1,432SC 16,00 40,00 10,00 1,654SC 17,00 25,00 4,00 1,342TC 17,00 25,00 4,00 1,409TC 17,00 27,00 5,00 1,409TC 17,00 27,00 7,00 1,409SC 17,00 28,00 5,00 1,342TC 17,00 28,00 5,00 1,409SC 17,00 28,00 6,00 1,342SC 17,00 28,00 7,00 1,342TC 17,00 28,00 7,00 1,409TC 17,00 29,00 7,00 1,409TC 17,00 30,00 5,00 1,409TC 17,00 30,00 6,00 1,409SC 17,00 30,00 7,00 1,342TC 17,00 30,00 7,00 1,409TC 17,00 30,00 7,00 1,409SC 17,00 32,00 5,00 1,432TC 17,00 32,00 5,00 1,503SC 17,00 32,00 7,00 1,432TC 17,00 32,00 7,00 1,503TC 17,00 32,00 8,00 1,503TC 17,00 34,00 4,00 1,503SC 17,00 35,00 5,00 1,432TC 17,00 35,00 5,00 1,503SC 17,00 35,00 7,00 1,432TC 17,00 35,00 7,00 1,503SC 17,00 35,00 8,00 1,432TC 17,00 35,00 8,00 1,503SC 17,00 40,00 6,00 1,654SC 17,00 40,00 7,00 1,654TC 17,00 40,00 7,00 1,785TC 17,00 40,00 8,00 1,785TC 17,00 40,00 10,00 1,785SC 17,00 47,00 7,00 2,118TC 17,00 47,00 7,00 2,224TC 17,00 47,00 8,00 2,224TC 17,00 47,00 10,00 2,224TC 17,46 28,58 6,40 1,409
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 18,00 26,00 6,00 1,342SC 18,00 28,00 6,00 1,342TC 18,00 28,00 6,00 1,409SC 18,00 28,00 7,00 1,342TC 18,00 28,00 7,00 1,409SC 18,00 30,00 5,00 1,342SC 18,00 30,00 7,00 1,342TC 18,00 30,00 7,00 1,409SC 18,00 32,00 7,00 1,432TC 18,00 32,00 7,00 1,503TC 18,00 32,00 8,00 1,503SC 18,00 35,00 7,00 1,432TC 18,00 35,00 7,00 1,503SC 18,00 35,00 10,00 1,432TC 18,00 35,00 10,00 1,503SC 18,00 40,00 7,00 1,654TC 18,00 40,00 7,00 1,785TC 19,00 25,00 6,00 1,409TC 19,00 27,00 5,00 1,409SC 19,00 27,00 6,00 1,342TC 19,00 28,00 7,00 1,409TC 19,00 30,00 7,00 1,409SC 19,00 32,00 7,00 1,432TC 19,00 32,00 7,00 1,503SC 19,00 35,00 7,00 1,432TC 19,00 35,00 7,00 1,503TC 19,00 47,00 7,00 2,224SC 19,00 47,00 10,00 2,118TC 19,05 28,58 6,40 1,409TC 19,05 30,00 5,00 1,409TC 20,00 26,00 4,00 1,409TC 20,00 28,00 4,00 1,409SC 20,00 28,00 7,00 1,342SC 20,00 30,00 4,00 1,342TC 20,00 30,00 4,50 1,409SC 20,00 30,00 5,00 1,342TC 20,00 30,00 5,00 1,409SC 20,00 30,00 7,00 1,342TC 20,00 30,00 7,00 1,409TC 20,00 31,00 7,00 1,503SC 20,00 32,00 5,00 1,432SC 20,00 32,00 7,00 1,432TC 20,00 32,00 7,00 1,503SC 20,00 35,00 4,00 1,432SC 20,00 35,00 5,50 1,432SC 20,00 35,00 6,00 1,432TC 20,00 35,00 6,00 1,503SC 20,00 35,00 7,00 1,432TC 20,00 35,00 7,00 1,503TC 20,00 35,00 8,00 1,503SC 20,00 35,00 10,00 1,432TC 20,00 35,00 10,00 1,503
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 20,00 36,00 7,00 1,785SC 20,00 37,00 7,00 1,654TC 20,00 37,00 7,00 1,785TC 20,00 37,00 8,00 1,785SC 20,00 38,00 5,00 1,654TC 20,00 38,00 5,00 1,785TC 20,00 38,00 7,00 1,785SC 20,00 38,00 8,00 1,654TC 20,00 38,00 8,00 1,785SC 20,00 40,00 7,00 1,654TC 20,00 40,00 7,00 1,785SC 20,00 40,00 10,00 1,654TC 20,00 40,00 10,00 1,736SC 20,00 42,00 6,00 1,849TC 20,00 42,00 6,00 *
SC 20,00 42,00 7,00 1,849TC 20,00 42,00 7,00 1,942TC 20,00 42,00 10,00 1,942TC 20,00 45,00 7,00 1,942SC 20,00 47,00 7,00 2,118TC 20,00 47,00 7,00 2,224TC 20,00 47,00 8,00 2,224SC 20,00 47,00 10,00 2,118TC 20,00 47,00 10,00 2,224SC 20,00 52,00 6,00 2,245SC 20,00 52,00 7,00 2,245TC 20,00 52,00 7,00 2,357TC 20,00 52,00 8,00 2,357SC 20,00 52,00 10,00 2,245TC 20,00 52,00 10,00 2,357TC 20,00 62,00 7,00 2,622TC 21,00 40,00 7,00 1,736TC 22,00 28,00 4,00 1,409SC 22,00 32,00 5,00 1,432SC 22,00 32,00 6,00 1,432SC 22,00 32,00 7,00 1,432TC 22,00 32,00 7,00 1,503TC 22,00 35,00 5,00 1,503SC 22,00 35,00 7,00 1,432TC 22,00 35,00 7,00 1,503SC 22,00 35,00 8,00 1,432SC 22,00 36,00 7,00 1,654TC 22,00 36,00 7,00 1,736TC 22,00 38,00 7,00 1,736SC 22,00 40,00 7,00 1,654TC 22,00 40,00 7,00 1,736TC 22,00 40,00 10,00 1,736SC 22,00 42,00 7,00 1,849TC 22,00 42,00 7,00 1,942TC 22,00 45,00 8,00 1,942SC 22,00 47,00 7,00 2,118TC 22,00 47,00 7,00 2,224
* Disponibile su richiesta Available on request
11
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 22,00 47,00 10,00 2,023SC 22,23 34,93 6,40 1,432SC 22,23 38,10 6,40 1,654SC 22,70 47,00 7,00 2,118TC 23,00 35,00 7,00 1,503SC 23,00 40,00 8,00 1,654TC 24,00 32,00 4,00 1,503TC 24,00 32,00 7,00 1,503SC 24,00 35,00 6,00 1,432TC 24,00 35,00 6,00 1,503SC 24,00 35,00 7,00 1,432TC 24,00 35,00 7,00 1,503TC 24,00 37,00 7,00 1,736SC 24,00 40,00 7,00 1,654TC 24,00 40,00 7,00 1,736TC 24,00 40,00 8,00 1,736TC 24,00 42,00 8,00 1,942TC 24,00 45,00 7,00 1,942TC 24,00 47,00 7,00 2,224SC 24,00 47,00 10,00 2,023TC 24,00 49,00 12,00 2,224SC 24,00 52,00 10,00 2,245TC 25,00 32,00 6,00 1,503TC 25,00 32,00 7,00 1,503SC 25,00 35,00 5,00 1,432TC 25,00 35,00 5,00 1,503SC 25,00 35,00 7,00 1,432TC 25,00 35,00 7,00 1,503SC 25,00 36,00 7,00 1,654SC 25,00 37,00 5,00 1,654TC 25,00 37,00 6,00 1,736SC 25,00 37,00 7,00 1,654TC 25,00 37,00 7,00 1,736SC 25,00 38,00 7,00 1,654TC 25,00 38,00 7,00 1,736TC 25,00 38,00 8,00 1,736SC 25,00 40,00 5,00 1,654SC 25,00 40,00 7,00 1,654TC 25,00 40,00 7,00 1,736SC 25,00 40,00 8,00 1,654TC 25,00 40,00 8,00 1,736SC 25,00 40,00 10,00 1,654TC 25,00 40,00 10,00 1,736SC 25,00 42,00 6,00 1,849SC 25,00 42,00 7,00 1,849TC 25,00 42,00 7,00 1,942SC 25,00 42,00 8,50 1,849SC 25,00 42,00 10,00 1,849TC 25,00 42,00 10,00 1,942TC 25,00 45,00 7,00 1,942SC 25,00 45,00 10,00 1,849TC 25,00 45,00 10,00 1,942
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 27,00 47,00 6,00 2,118TC 27,00 47,00 7,00 2,224TC 27,00 52,00 8,00 2,357TC 28,00 37,00 4,00 1,736SC 28,00 38,00 7,00 1,654TC 28,00 38,00 7,00 1,736TC 28,00 38,00 8,00 1,736SC 28,00 40,00 7,00 1,654TC 28,00 40,00 7,00 1,736SC 28,00 42,00 7,00 1,849TC 28,00 42,00 7,00 1,942TC 28,00 42,00 10,00 1,942SC 28,00 45,00 8,00 1,849TC 28,00 45,00 8,00 1,942SC 28,00 47,00 7,00 2,118TC 28,00 47,00 7,00 2,224SC 28,00 47,00 10,00 2,118TC 28,00 47,00 10,00 2,118TC 28,00 50,00 10,00 2,224SC 28,00 52,00 5,00 2,245SC 28,00 52,00 7,00 2,245TC 28,00 52,00 7,00 2,357SC 28,00 52,00 10,00 2,245TC 28,00 52,00 10,00 2,357TC 28,00 56,00 6,00 2,490TC 28,00 58,00 6,00 2,490SC 28,58 38,10 6,40 1,654TC 29,00 36,00 7,00 1,736SC 29,00 41,00 5,00 1,849SC 29,00 50,00 10,00 2,118TC 30,00 40,00 5,00 1,736TC 30,00 40,00 6,00 1,736SC 30,00 40,00 7,00 1,654TC 30,00 40,00 7,00 1,736SC 30,00 40,00 10,00 1,654TC 30,00 41,00 7,00 1,942SC 30,00 42,00 7,00 1,849TC 30,00 42,00 7,00 1,942TC 30,00 42,00 8,00 1,942TC 30,00 42,00 10,00 1,942TC 30,00 43,00 8,00 1,942TC 30,00 45,00 7,00 1,942SC 30,00 45,00 8,00 1,849TC 30,00 45,00 8,00 1,942SC 30,00 47,00 5,00 2,224SC 30,00 47,00 6,00 2,224TC 30,00 47,00 6,00 2,224SC 30,00 47,00 7,00 2,118TC 30,00 47,00 7,00 2,224TC 30,00 47,00 8,00 2,224SC 30,00 47,00 10,00 2,118TC 30,00 47,00 10,00 2,224
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 25,00 45,00 11,00 1,942SC 25,00 46,00 7,00 2,118TC 25,00 46,00 7,00 2,224SC 25,00 47,00 5,00 2,118SC 25,00 47,00 7,00 2,118TC 25,00 47,00 7,00 2,224SC 25,00 47,00 8,00 2,118TC 25,00 47,00 8,00 2,224SC 25,00 47,00 10,00 2,118TC 25,00 47,00 10,00 2,224TC 25,00 50,00 7,00 2,224SC 25,00 50,00 10,00 2,118TC 25,00 50,00 10,00 2,224TC 25,00 52,00 5,00 2,357SC 25,00 52,00 7,00 2,245TC 25,00 52,00 7,00 2,357SC 25,00 52,00 8,00 2,245TC 25,00 52,00 8,00 2,357SC 25,00 52,00 10,00 2,245TC 25,00 52,00 10,00 2,357TC 25,00 55,00 10,00 2,357SC 25,00 62,00 6,00 2,498SC 25,00 62,00 7,00 2,498TC 25,00 62,00 8,00 2,622SC 25,00 62,00 10,00 2,498TC 25,00 62,00 10,00 2,622TC 25,00 72,00 7,00 3,021TC 25,00 80,00 10,00 3,624SC 25,40 31,75 3,20 *
TC 25,40 35,00 5,00 1,503TC 25,40 40,00 7,00 1,736TC 25,40 50,80 12,70 2,357TC 25,40 52,00 7,00 2,357TC 25,70 35,00 7/9 1,503TC 26,00 35,00 7,00 1,503TC 26,00 36,00 7,00 1,736SC 26,00 37,00 7,00 1,654TC 26,00 37,00 7,00 1,736TC 26,00 37,00 8,00 1,736SC 26,00 42,00 7,00 1,849TC 26,00 42,00 7,00 1,942TC 26,00 42,00 8,00 1,942SC 26,00 47,00 7,00 2,118TC 26,00 48,00 8,00 2,224SC 26,00 52,00 8,00 2,245TC 27,00 36,00 6,00 1,736SC 27,00 37,00 7,00 1,654TC 27,00 37,00 7,00 1,736TC 27,00 40,00 6,00 1,736TC 27,00 40,00 7,00 1,736SC 27,00 41,00 10,00 1,849SC 27,00 42,00 10,00 1,849
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
* Disponibile su richiesta Available on request
12
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 30,00 48,00 8,00 2,118SC 30,00 50,00 5,00 2,118SC 30,00 50,00 7,00 2,118TC 30,00 50,00 7,00 2,224SC 30,00 50,00 8,00 2,118TC 30,00 50,00 8,00 2,224SC 30,00 50,00 10,00 2,118TC 30,00 50,00 10,00 2,224SC 30,00 52,00 4,00 2,245SC 30,00 52,00 6,00 2,245SC 30,00 52,00 7,00 2,245TC 30,00 52,00 7,00 2,357TC 30,00 52,00 8,00 2,357SC 30,00 52,00 10,00 2,245TC 30,00 52,00 10,00 2,357SC 30,00 55,00 7,00 2,245TC 30,00 55,00 7,00 2,357SC 30,00 55,00 10,00 2,245TC 30,00 55,00 10,00 2,357SC 30,00 56,00 10,00 2,371TC 30,00 56,00 10,00 2,490SC 30,00 60,00 10,00 2,371TC 30,00 60,00 10,00 2,490SC 30,00 62,00 7,00 2,498TC 30,00 62,00 7,00 2,622TC 30,00 62,00 8,00 2,622SC 30,00 62,00 10,00 2,498TC 30,00 62,00 10,00 2,622SC 30,00 72,00 6,00 2,877TC 30,00 72,00 9,00 3,021SC 30,00 72,00 10,00 3,280TC 30,00 72,00 10,00 3,021TC 30,00 90,00 7,00 4,398SC 31,00 47,00 7,00 2,118TC 31,00 52,00 7,00 2,357SC 31,00 62,50 4,3/5,8 2,497TC 31,75 40,00 6,00 1,736TC 31,75 40,00 7,00 1,736TC 31,75 44,45 6,40 1,942TC 31,75 62,00 7,00 2,622TC 31,75 62,00 9,50 2,622SC 32,00 40,00 7,00 1,654SC 32,00 42,00 7,00 1,849TC 32,00 42,00 7,00 1,942SC 32,00 45,00 6,00 1,849SC 32,00 45,00 7,00 1,849TC 32,00 45,00 7,00 1,942SC 32,00 47,00 7,00 2,118TC 32,00 47,00 7,00 2,224TC 32,00 47,00 8,00 2,224TC 32,00 47,00 10,00 2,224TC 32,00 48,00 7,00 2,224
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 32,00 50,00 7,00 2,224SC 32,00 50,00 8,00 2,118TC 32,00 50,00 10,00 2,224SC 32,00 52,00 5,00 2,245SC 32,00 52,00 7,00 2,245TC 32,00 52,00 7,00 2,357SC 32,00 52,00 10,00 2,245TC 32,00 52,00 10,00 2,357TC 32,00 55,00 10,00 2,356TC 32,00 56,00 10,00 2,490TC 32,00 58,00 10,00 2,490TC 32,00 62,00 10,00 2,622TC 33,00 50,00 6,00 2,224TC 33,00 50,00 7,00 2,224TC 33,00 50,00 10,00 2,224SC 33,00 52,00 6,00 2,245TC 33,34 50,80 7,90 2,224TC 34,00 48,00 7,00 2,224SC 34,00 52,00 8,00 2,245TC 34,00 52,00 8,00 2,357TC 34,00 52,00 10,00 2,356SC 34,00 62,00 10,00 2,498SC 35,00 44,00 4,00 1,849SC 35,00 45,00 5,00 1,849SC 35,00 45,00 7,00 1,849TC 35,00 45,00 7,00 1,942TC 35,00 47,00 5,00 2,224SC 35,00 47,00 7,00 2,118TC 35,00 47,00 7,00 2,224TC 35,00 47,00 10,00 2,224TC 35,00 48,00 9,00 2,224SC 35,00 50,00 5,00 2,118TC 35,00 50,00 5,00 2,224SC 35,00 50,00 7,00 2,118TC 35,00 50,00 7,00 2,224SC 35,00 50,00 8,00 2,118TC 35,00 50,00 8,00 2,224SC 35,00 50,00 10,00 2,118TC 35,00 50,00 10,00 2,224SC 35,00 52,00 7,00 2,245TC 35,00 52,00 7,00 2,357SC 35,00 52,00 8,00 2,245TC 35,00 52,00 8,00 2,357SC 35,00 52,00 10,00 2,245TC 35,00 52,00 10,00 2,357TC 35,00 52,00 12,00 2,357TC 35,00 54,00 8,00 2,356TC 35,00 55,00 7,00 2,357SC 35,00 55,00 8,00 2,245TC 35,00 55,00 8,00 2,357SC 35,00 55,00 10,00 2,245TC 35,00 55,00 10,00 2,357
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 35,00 55,00 11,00 2,356SC 35,00 56,00 8,00 2,371SC 35,00 56,00 10,00 2,371TC 35,00 56,00 10,00 2,490SC 35,00 56,00 12,00 2,371TC 35,00 58,00 10,00 2,490SC 35,00 60,00 10,00 2,371TC 35,00 60,00 10,00 2,490SC 35,00 62,00 7,00 2,498TC 35,00 62,00 7,00 2,622TC 35,00 62,00 8,00 2,622SC 35,00 62,00 10,00 2,498TC 35,00 62,00 10,00 2,622TC 35,00 62,00 12,00 2,622SC 35,00 65,00 10,00 2,498TC 35,00 65,00 10,00 2,623SC 35,00 68,00 8,00 2,656SC 35,00 68,00 10,00 2,655TC 35,00 68,00 10,00 2,656TC 35,00 72,00 7,00 3,021SC 35,00 72,00 10,00 2,877TC 35,00 72,00 10,00 3,021TC 35,00 72,00 12,00 3,021SC 35,00 80,00 10,00 3,452TC 35,00 80,00 10,00 3,624SC 35,00 80,00 12,00 3,452TC 35,00 80,00 12,00 3,626SC 35,00 82,00 6,00 3,820SC 36,00 47,00 7,00 2,118SC 36,00 50,00 7,00 2,118TC 36,00 50,00 7,00 2,224SC 36,00 52,00 7,00 2,245TC 36,00 52,00 7,00 2,356SC 36,00 54,00 7,50 2,245SC 36,00 58,00 10,00 2,371SC 36,00 62,00 7,00 2,498TC 36,00 62,00 7,00 2,622SC 36,00 68,00 10,00 2,656TC 36,51 47,00 5,00 2,118TC 36,51 72,00 7,00 3,021SC 37,00 52,00 7,00 2,245SC 37,00 62,00 8,00 2,498SC 38,00 50,00 7,00 2,118TC 38,00 50,00 7,00 2,224SC 38,00 52,00 7,00 2,245TC 38,00 52,00 7,00 2,357SC 38,00 52,00 8,00 2,245TC 38,00 52,00 8,00 2,357SC 38,00 52,00 10,00 2,245SC 38,00 54,00 10,00 2,245TC 38,00 54,00 10,00 2,356SC 38,00 55,00 7,00 2,357
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
13
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 38,00 55,00 7,00 2,357SC 38,00 55,00 10,00 2,245TC 38,00 55,00 10,00 2,357TC 38,00 56,00 10,00 2,490TC 38,00 58,00 10,00 2,490TC 38,00 58,00 11,00 2,490TC 38,00 62,00 7,00 2,622SC 38,00 62,00 8,00 2,498SC 38,00 62,00 10,00 2,498TC 38,00 62,00 10,00 2,498TC 38,00 72,00 10,00 3,021SC 38,00 74,00 10,00 2,877TC 38,00 80,00 10,00 3,624TC 38,10 80,00 7,00 3,624SC 40,00 49,60 7,30 2,118TC 40,00 50,00 5,00 2,224SC 40,00 50,00 8,00 2,118TC 40,00 50,00 8,00 2,224SC 40,00 52,00 7,00 2,245TC 40,00 52,00 7,00 2,357TC 40,00 52,00 8,00 2,357TC 40,00 52,00 10,00 2,357TC 40,00 55,00 6,00 2,356SC 40,00 55,00 7,00 2,245TC 40,00 55,00 7,00 2,357SC 40,00 55,00 8,00 2,245TC 40,00 55,00 8,00 2,357SC 40,00 55,00 10,00 2,245TC 40,00 55,00 10,00 2,356TC 40,00 56,00 7,00 2,490SC 40,00 56,00 8,00 2,371TC 40,00 56,00 8,00 2,488SC 40,00 56,00 12,00 2,245SC 40,00 58,00 10,00 2,245TC 40,00 58,00 10,00 2,490SC 40,00 58,00 12,00 2,245SC 40,00 60,00 7,00 2,371TC 40,00 60,00 7,00 2,490SC 40,00 60,00 10,00 2,371TC 40,00 60,00 10,00 2,490SC 40,00 62,00 7,00 2,498TC 40,00 62,00 7,00 2,622SC 40,00 62,00 8,00 2,498TC 40,00 62,00 8,00 2,622SC 40,00 62,00 10,00 2,498TC 40,00 62,00 10,00 2,622SC 40,00 65,00 10,00 2,498TC 40,00 65,00 10,00 2,622TC 40,00 68,00 8,00 2,788SC 40,00 68,00 10,00 2,656TC 40,00 68,00 10,00 2,788SC 40,00 70,00 10,00 2,656
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 45,00 62,00 7,00 2,498TC 45,00 62,00 7,00 2,622SC 45,00 62,00 8,00 2,498TC 45,00 62,00 8,00 2,622SC 45,00 62,00 10,00 2,498TC 45,00 62,00 10,00 2,622TC 45,00 62,10 7,00 2,622SC 45,00 65,00 8,00 2,498TC 45,00 65,00 8,00 2,622SC 45,00 65,00 10,00 2,498TC 45,00 65,00 10,00 2,622TC 45,00 65,00 12,00 2,622TC 45,00 66,00 10,00 2,788TC 45,00 68,00 8,00 2,789TC 45,00 68,00 9,00 2,788SC 45,00 68,00 10,00 2,656SC 45,00 70,00 7,00 2,656TC 45,00 70,00 10,00 2,788SC 45,00 72,00 8,00 2,877TC 45,00 72,00 8,00 3,021SC 45,00 72,00 10,00 2,877TC 45,00 72,00 10,00 3,021SC 45,00 75,00 8,00 2,877TC 45,00 75,00 8,00 3,021SC 45,00 75,00 10,00 2,877TC 45,00 75,00 10,00 3,021SC 45,00 80,00 10,00 3,452TC 45,00 80,00 10,00 3,624TC 45,00 80,00 12,00 3,624SC 45,00 85,00 10,00 3,820TC 45,00 85,00 10,00 4,011SC 45,00 90,00 10,00 4,189TC 45,00 90,00 10,00 4,398SC 45,00 93,00 6,00 4,524TC 45,00 100,00 10,00 5,243SC 46,00 65,00 10,00 2,498TC 47,00 65,00 10,00 2,622TC 48,00 60,00 10,00 2,490SC 48,00 62,00 8,00 2,498TC 48,00 62,00 8,00 2,622TC 48,00 62,00 10,00 2,622TC 48,00 65,00 8,00 2,622SC 48,00 65,00 10,00 2,498TC 48,00 65,00 10,00 2,622SC 48,00 68,00 10,00 2,656TC 48,00 68,00 10,00 2,788TC 48,00 70,00 10,00 2,788SC 48,00 72,00 8,00 2,877TC 48,00 72,00 8,00 3,021SC 48,00 72,00 10,00 2,877TC 48,00 72,00 10,00 3,021SC 48,00 80,00 10,00 3,452
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 40,00 70,00 10,00 2,788SC 40,00 72,00 7,00 2,877TC 40,00 72,00 7,00 3,021SC 40,00 72,00 10,00 2,877TC 40,00 72,00 10,00 3,021TC 40,00 80,00 7,00 3,624SC 40,00 80,00 8,00 3,452TC 40,00 80,00 8,00 3,624SC 40,00 80,00 10,00 3,452TC 40,00 80,00 10,00 3,624TC 40,00 80,00 12,00 3,624SC 40,00 85,00 10,00 3,820SC 40,00 90,00 8,00 4,189SC 40,00 90,00 10,00 4,189TC 40,00 90,00 10,00 4,398SC 40,00 90,00 12,00 4,189TC 40,00 90,00 12,00 4,399TC 40,00 110,00 10,00 6,052TC 41,00 53,00 7,00 2,357SC 42,00 55,00 7,00 2,245SC 42,00 55,00 8,00 2,245TC 42,00 55,00 8,00 2,357SC 42,00 56,00 7,00 2,371TC 42,00 56,00 7,00 2,490SC 42,00 60,00 10,00 2,371TC 42,00 60,00 10,00 2,490SC 42,00 60,00 12,00 2,371SC 42,00 62,00 7,00 2,498TC 42,00 62,00 7,00 2,622SC 42,00 62,00 8,00 2,373TC 42,00 62,00 8,00 2,498SC 42,00 62,00 10,00 2,498TC 42,00 62,00 10,00 2,622TC 42,00 65,00 10,00 2,622TC 42,00 65,00 12,00 2,623TC 42,00 68,00 8,00 2,788SC 42,00 72,00 8,00 2,877TC 42,00 72,00 8,00 3,021TC 42,00 72,00 10,00 3,021SC 43,00 75,00 10,00 2,877SC 44,00 60,00 10,00 2,371SC 44,00 62,00 10,00 2,498TC 45,00 54,00 4,50 2,357SC 45,00 55,00 7,00 2,245TC 45,00 55,00 7,00 2,357TC 45,00 58,00 7,00 2,490SC 45,00 60,00 7,00 2,371TC 45,00 60,00 7,00 2,490SC 45,00 60,00 8,00 2,371TC 45,00 60,00 8,00 2,490SC 45,00 60,00 10,00 2,371TC 45,00 60,00 10,00 2,490
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
14
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 48,00 80,00 10,00 3,624SC 48,00 85,00 10,00 3,820TC 50,00 58,00 4,00 2,622TC 50,00 62,00 7,00 2,622SC 50,00 62,00 8,00 2,498TC 50,00 62,00 10,00 2,622SC 50,00 65,00 8,00 2,498TC 50,00 65,00 8,00 2,622SC 50,00 65,00 10,00 2,498TC 50,00 65,00 10,00 2,622SC 50,00 68,00 8,00 2,656TC 50,00 68,00 8,00 2,788SC 50,00 68,00 10,00 2,737TC 50,00 68,00 10,00 2,788SC 50,00 70,00 10,00 2,656TC 50,00 70,00 10,00 2,788TC 50,00 72,00 7,00 3,021SC 50,00 72,00 8,00 2,877TC 50,00 72,00 8,00 3,021SC 50,00 72,00 10,00 2,877TC 50,00 72,00 10,00 3,021TC 50,00 72,00 12,00 3,021SC 50,00 75,00 10,00 2,877TC 50,00 75,00 12,00 3,020SC 50,00 80,00 8,00 3,452TC 50,00 80,00 8,00 3,624SC 50,00 80,00 10,00 3,452TC 50,00 80,00 10,00 3,624TC 50,00 80,00 13,00 3,624SC 50,00 85,00 10,00 3,820TC 50,00 85,00 10,00 4,011TC 50,00 90,00 8,00 4,398SC 50,00 90,00 10,00 4,189TC 50,00 90,00 10,00 4,398TC 50,00 100,00 10,00 5,243TC 50,00 110,00 10,00 6,052TC 50,00 130,00 15,00 8,832TC 52,00 68,00 7,00 2,788SC 52,00 68,00 8,00 2,656TC 52,00 68,00 8,00 2,789TC 52,00 68,00 10,00 2,788TC 52,00 70,00 9,00 2,788SC 52,00 72,00 8,00 2,877TC 52,00 72,00 8,00 3,021TC 52,00 72,00 10,00 3,021SC 52,00 75,00 8,00 2,877SC 52,00 75,00 12,00 2,877TC 52,00 75,00 12,00 3,021TC 52,00 80,00 10,00 3,624TC 52,00 80,00 13,00 3,965SC 52,00 85,00 10,00 3,820TC 52,00 85,00 10,00 4,011
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 54,00 72,00 10,00 3,021TC 54,00 81,00 10,00 4,011SC 55,00 68,00 8,00 2,656SC 55,00 70,00 8,00 2,656TC 55,00 70,00 8,00 2,788SC 55,00 70,00 10,00 2,656TC 55,00 70,00 10,00 2,788SC 55,00 72,00 8,00 2,877TC 55,00 72,00 8,00 3,021SC 55,00 72,00 10,00 2,877TC 55,00 72,00 10,00 3,021TC 55,00 75,00 8,00 3,021SC 55,00 75,00 10,00 2,877TC 55,00 75,00 10,00 3,021SC 55,00 78,00 12,00 3,256SC 55,00 80,00 8,00 3,452TC 55,00 80,00 8,00 3,624SC 55,00 80,00 10,00 3,452TC 55,00 80,00 10,00 3,624TC 55,00 80,10 8,00 4,011SC 55,00 85,00 8,00 3,820TC 55,00 85,00 8,00 4,011SC 55,00 85,00 10,00 3,820TC 55,00 85,00 10,00 4,011TC 55,00 90,00 8,00 4,398SC 55,00 90,00 10,00 4,189TC 55,00 90,00 10,00 4,398TC 55,00 100,00 10,00 5,243SC 55,00 100,00 12,00 4,993TC 55,00 100,00 12,00 5,243TC 55,00 120,00 12,00 7,389SC 56,00 80,00 8,00 3,452SC 56,00 85,00 8,00 3,820SC 58,00 72,00 8,00 2,877TC 58,00 72,00 8,00 3,021TC 58,00 72,00 10,00 3,021SC 58,00 80,00 8,00 3,452SC 58,00 80,00 10,00 3,452TC 58,00 80,00 10,00 3,624TC 58,00 85,00 10,00 4,410TC 58,00 90,00 10,00 *
SC 60,00 70,00 7,00 2,795SC 60,00 72,00 8,00 2,955SC 60,00 75,00 8,00 2,877TC 60,00 75,00 8,00 3,021TC 60,00 75,00 10,00 3,021SC 60,00 80,00 8,00 3,452TC 60,00 80,00 8,00 3,624SC 60,00 80,00 10,00 3,452TC 60,00 80,00 10,00 3,624TC 60,00 80,00 12,00 3,624TC 60,00 82,00 12,00 4,011
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 60,00 85,00 8,00 4,011SC 60,00 85,00 10,00 3,820TC 60,00 85,00 10,00 4,011SC 60,00 90,00 8,00 4,189TC 60,00 90,00 8,00 4,398SC 60,00 90,00 10,00 4,189TC 60,00 90,00 10,00 4,398SC 60,00 95,00 10,00 4,524TC 60,00 95,00 10,00 4,750TC 60,00 100,00 10,00 5,243TC 60,00 100,00 12,00 5,243TC 60,00 100,00 13,00 5,243TC 60,00 110,00 12,00 6,052TC 60,50 78,00 10,00 3,419SC 62,00 85,00 10,00 3,820TC 62,00 85,00 10,00 4,011TC 62,00 85,00 12,00 4,011SC 62,00 90,00 10,00 4,189TC 62,00 90,00 10,00 4,398SC 63,00 90,00 10,00 4,189TC 63,00 90,00 10,00 4,398TC 63,00 100,00 10,00 5,243TC 64,00 80,00 8,00 3,624TC 64,00 85,00 10,00 4,410TC 64,00 85,00 16,00 4,011TC 65,00 75,00 8,00 3,021SC 65,00 80,00 8,00 3,452SC 65,00 80,00 10,00 3,452TC 65,00 80,00 10,00 3,624SC 65,00 85,00 10,00 3,820TC 65,00 85,00 10,00 4,011TC 65,00 85,00 12,00 4,011TC 65,00 85,00 13,00 4,011TC 65,00 90,00 8,00 4,398SC 65,00 90,00 10,00 4,189TC 65,00 90,00 10,00 4,398TC 65,00 90,00 13,00 4,398SC 65,00 95,00 10,00 4,524TC 65,00 95,00 10,00 4,750TC 65,00 100,00 8,00 5,243SC 65,00 100,00 10,00 4,993TC 65,00 100,00 10,00 5,243SC 65,00 100,00 12,00 4,993TC 65,00 100,00 12,00 5,510TC 65,00 110,00 10,00 6,052TC 65,00 120,00 13,00 7,389SC 68,00 90,00 10,00 4,189TC 68,00 90,00 10,00 4,398TC 68,00 98,00 10,00 5,243SC 68,00 100,00 13,00 5,120SC 70,00 85,00 8,00 3,820TC 70,00 85,00 8,00 4,011
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
15
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 70,00 85,00 10,00 4,011SC 70,00 90,00 10,00 4,190TC 70,00 90,00 10,00 4,398SC 70,00 90,00 12,00 4,189TC 70,00 90,00 12,00 4,398SC 70,00 95,00 10,00 4,524TC 70,00 95,00 10,00 4,750TC 70,00 95,00 13,00 4,750SC 70,00 100,00 10,00 4,993TC 70,00 100,00 10,00 5,243TC 70,00 100,00 12,00 5,243SC 70,00 110,00 8,00 5,764SC 70,00 110,00 10,00 5,764TC 70,00 110,00 10,00 6,052SC 70,00 110,00 12,00 5,764TC 70,00 110,00 12,00 6,052TC 70,00 110,00 13,00 6,052TC 70,00 120,00 12,00 7,745SC 71,00 88,00 8,00 4,189SC 72,00 90,00 10,00 4,189TC 72,00 90,00 10,00 4,399SC 72,00 95,00 10,00 4,524TC 72,00 100,00 10,00 5,243TC 72,00 110,00 10,00 6,052TC 74,00 90,00 10,00 4,524SC 75,00 90,00 8,00 4,189TC 75,00 90,00 10,00 4,398SC 75,00 95,00 10,00 4,524TC 75,00 95,00 10,00 4,750SC 75,00 95,00 12,00 4,524TC 75,00 95,00 12,00 4,751SC 75,00 100,00 10,00 4,993TC 75,00 100,00 10,00 5,243SC 75,00 100,00 12,00 4,993TC 75,00 105,00 13,00 5,589TC 75,00 110,00 10,00 6,052SC 75,00 110,00 12,00 5,764SC 75,00 110,00 13,00 5,764TC 75,00 110,00 13,00 6,052TC 75,00 115,00 10,00 5,591SC 75,00 120,00 12,00 7,037TC 75,00 120,00 12,00 7,389TC 75,00 130,00 10,00 8,832SC 78,00 100,00 10,00 4,993TC 78,00 100,00 13,00 5,243SC 78,00 110,00 12,00 5,764SC 80,00 100,00 10,00 4,993TC 80,00 100,00 10,00 5,243TC 80,00 100,00 12,00 5,243SC 80,00 100,00 13,00 4,993TC 80,00 100,00 13,00 5,243TC 80,00 105,00 12,00 5,595
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 92,86 120,65 12,70 7,389SC 95,00 110,00 6,00 *
TC 95,00 110,00 10,00 6,239TC 95,00 110,00 12,00 6,052TC 95,00 115,00 12,00 7,565SC 95,00 120,00 8,00 7,037TC 95,00 120,00 8,00 7,389SC 95,00 120,00 12,00 7,037TC 95,00 120,00 12,00 7,389SC 95,00 120,00 13,00 7,037SC 95,00 125,00 12,00 7,640TC 95,00 125,00 12,00 8,023TC 95,00 125,00 13,00 8,023SC 95,00 130,00 12,00 8,411TC 95,00 130,00 12,00 8,832TC 95,00 135,00 13,00 10,465SC 98,00 120,00 13,00 7,038TC 100,00 115,00 9,00 6,721SC 100,00 120,00 10,00 7,037SC 100,00 120,00 12,00 7,037TC 100,00 120,00 12,00 7,389SC 100,00 125,00 12,00 7,037TC 100,00 125,00 12,00 8,023TC 100,00 125,00 13,00 8,023SC 100,00 130,00 12,00 8,411TC 100,00 130,00 12,00 8,832TC 100,00 130,00 13,00 8,832TC 100,00 135,00 13,00 9,150SC 100,00 140,00 13,00 9,517SC 100,00 150,00 13,00 11,126TC 100,00 150,00 13,00 11,682SC 101,60 127,00 7,90 8,411SC 102,00 125,00 13,00 * 30,000TC 105,00 125,00 10,00 8,023SC 105,00 125,00 13,00 7,640SC 105,00 130,00 12,00 8,411TC 105,00 130,00 12,00 8,832TC 105,00 130,00 13,00 8,832TC 105,00 135,00 13,00 8,964SC 105,00 140,00 12,00 9,517TC 105,00 140,00 12,00 9,993SC 105,00 150,00 15,00 11,126SC 105,00 160,00 12,00 12,790SC 110,00 130,00 12,00 8,411TC 110,00 130,00 12,00 8,832SC 110,00 130,00 13,00 8,520SC 110,00 140,00 12,00 9,517TC 110,00 140,00 12,00 9,993SC 110,00 150,00 13,00 11,126TC 112,00 140,00 13,00 9,993SC 115,00 130,00 12,00 8,411SC 115,00 135,00 10,00 8,964
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 80,00 105,00 13,00 5,589SC 80,00 110,00 10,00 5,764TC 80,00 110,00 10,00 6,052SC 80,00 110,00 12,00 5,764TC 80,00 110,00 12,00 6,052SC 80,00 120,00 12,00 7,037TC 80,00 120,00 13,00 7,389TC 80,00 125,00 10,00 8,023SC 80,00 125,00 12,00 7,640TC 80,00 125,00 12,00 8,023TC 80,00 140,00 12,00 9,993TC 80,00 140,00 13,00 9,993SC 82,00 110,00 12,00 5,764SC 85,00 100,00 6,00 4,993SC 85,00 100,00 9,00 4,993TC 85,00 100,00 13,00 5,243SC 85,00 105,00 10,00 5,328TC 85,00 105,00 10,00 6,174SC 85,00 105,00 13,00 5,328TC 85,00 105,00 13,00 5,595SC 85,00 110,00 12,00 5,764TC 85,00 110,00 12,00 6,052SC 85,00 110,00 13,00 5,764TC 85,00 110,00 13,00 6,052SC 85,00 120,00 12,00 7,037TC 85,00 120,00 12,00 7,389TC 85,00 120,00 13,00 7,389TC 85,00 125,00 12,00 8,023TC 85,00 125,00 14,00 8,023TC 85,00 130,00 10,00 8,831SC 85,00 130,00 12,00 8,405TC 85,00 130,00 12,00 8,832TC 90,00 105,00 10,00 5,595TC 90,00 110,00 8,00 6,052SC 90,00 110,00 10,00 5,764SC 90,00 110,00 12,00 5,764TC 90,00 110,00 12,00 6,052SC 90,00 110,00 13,00 5,764TC 90,00 115,00 12,00 6,720SC 90,00 115,00 13,00 6,401TC 90,00 115,00 13,00 6,720SC 90,00 120,00 12,00 7,037TC 90,00 120,00 12,00 7,389TC 90,00 120,00 13,00 7,389SC 90,00 125,00 12,00 7,640TC 90,00 125,00 12,00 8,023SC 90,00 130,00 12,00 8,411TC 90,00 130,00 12,00 8,832TC 90,00 140,00 12,00 9,993SC 90,00 140,00 13,00 10,365TC 90,00 160,00 10,00 13,019TC 92,00 120,00 12,00 7,389
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
* Disponibile su richiesta Available on request
16
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 115,00 140,00 12,00 9,517TC 115,00 140,00 12,00 9,993SC 115,00 140,00 13,00 9,517TC 115,00 140,00 13,00 9,993TC 115,00 150,00 12,00 11,682SC 120,00 140,00 13,00 9,517SC 120,00 150,00 12,00 11,126TC 120,00 150,00 12,00 11,682SC 120,00 150,00 13,00 11,126TC 120,00 150,00 13,00 11,682TC 120,00 150,00 15,00 11,682SC 120,00 160,00 12,00 12,399TC 120,00 160,00 12,00 13,018SC 120,00 160,00 13,00 12,399TC 120,00 160,00 15,00 13,018TC 120,00 180,00 13,00 16,608TC 125,00 143,00 13,00 11,126SC 125,00 150,00 12,00 11,126TC 125,00 150,00 12,00 11,682SC 125,00 160,00 12,00 12,399SC 125,00 160,00 13,00 11,682TC 130,00 150,00 12,00 11,682TC 130,00 150,00 13,00 11,682SC 130,00 160,00 12,00 12,399TC 130,00 160,00 12,00 13,030TC 130,00 160,00 14,00 14,185TC 130,00 160,00 15,00 13,240SC 130,00 170,00 12,00 13,874TC 130,00 170,00 12,00 14,567TC 130,00 170,00 15,00 14,567SC 130,00 182,00 16,00 17,268TC 130,00 200,00 12,00 19,542SC 135,00 160,00 12,00 12,399SC 135,00 170,00 12,00 13,874TC 140,00 160,00 13,00 13,019TC 140,00 165,00 15,00 12,041SC 140,00 170,00 12,00 13,874TC 140,00 170,00 12,00 14,567SC 140,00 170,00 15,00 13,874TC 140,00 170,00 15,00 14,567SC 140,00 180,00 10,00 15,817SC 140,00 180,00 12,00 15,817TC 140,00 180,00 12,00 16,608TC 142,00 157,00 10,00 13,019TC 145,00 167,00 13,00 14,567TC 145,00 170,00 13,00 14,567SC 145,00 170,00 15,00 13,874TC 145,00 170,00 15,00 14,567TC 145,00 175,00 14,00 16,397SC 145,00 175,00 15,00 15,611TC 145,00 180,00 12,00 16,608TC 148,00 170,00 15,00 14,567
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 150,00 170,00 12,00 15,817SC 150,00 180,00 12,00 15,817TC 150,00 180,00 12,00 16,608SC 150,00 180,00 13,00 15,817TC 150,00 180,00 13,00 16,608SC 150,00 180,00 15,00 15,817TC 150,00 225,00 12,00 30,560SC 155,00 175,00 12,00 15,611TC 160,00 185,00 10,00 17,605SC 160,00 190,00 13,00 18,654TC 160,00 190,00 13,00 19,705SC 160,00 190,00 15,00 18,766TC 160,00 190,00 15,00 19,699SC 160,00 200,00 12,00 21,100SC 160,00 220,00 12,00 26,843TC 160,00 240,00 15,00 32,695TC 165,00 190,00 13,00 19,707SC 170,00 200,00 12,00 21,100SC 170,00 200,00 15,00 21,100TC 170,00 200,00 15,00 22,150TC 170,00 205,00 17,00 24,150SC 170,00 210,00 15,00 22,210SC 175,00 200,00 15,00 21,100TC 175,00 200,00 15,00 22,150SC 175,00 210,00 15,00 22,210TC 180,00 210,00 15,00 24,159TC 180,00 220,00 15,00 28,185SC 190,00 215,00 16,00 24,158SC 190,00 220,00 15,00 26,843TC 190,00 220,00 15,00 28,185SC 193,00 210,00 8,00 22,210SC 200,00 225,00 15,00 28,453SC 200,00 230,00 15,00 28,450TC 200,00 230,00 15,00 30,565TC 200,00 240,00 15,00 33,100SC 200,00 250,00 15,00 34,299SC 210,00 240,00 15,00 29,700TC 210,00 240,00 15,00 32,695SC 210,00 250,00 15,00 34,299TC 210,00 250,00 15,00 36,010SC 215,00 240,00 12,00 29,700TC 220,00 250,00 15,00 36,014TC 220,00 250,00 20,00 36,014SC 230,00 260,00 15,00 38,600SC 240,00 270,00 15,00 37,162TC 240,00 270,00 15,00 39,020SC 240,00 280,00 15,00 43,320TC 250,00 280,00 15,00 51,450SC 260,00 290,00 15,00 58,140TC 260,00 290,00 15,00 61,210SC 260,00 300,00 20,00 * 63,700TC 260,00 300,00 20,00 66,887
Anelli di tenuta standard in NBRStandard shaft seals in NBR SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 265,00 290,00 16,00 * 58,140SC 280,00 310,00 15,00 87,920TC 280,00 310,00 16,00 * 92,310TC 280,00 320,00 20,00 95,680SC 300,00 340,00 16,00 * 98,220SC 300,00 340,00 18,00 98,220TC 300,00 340,00 18,00 103,130SC 320,00 360,00 18,00 * 138,700TC 320,00 360,00 18,00 145,700SC 330,00 370,00 18,00 * 137,220SC 340,00 380,00 18,00 137,220SC 360,00 400,00 16,00 * 153,660TC 360,00 400,00 18,00 161,410SC 380,00 420,00 20,00 * 170,740TC 380,00 420,00 20,00 179,350SC 400,00 425,00 15,00 179,350TC 400,00 440,00 20,00 201,950TC 420,00 460,00 20,00 216,700SC 440,00 480,00 20,00 * 225,050TC 440,00 480,00 20,00 236,400SC 500,00 540,00 15,00 * 309,950
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
* Disponibile su richiesta Available on request
17
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 6,00 15,00 4,00 6,710
SC 6,00 16,00 7,00 6,710
SC 7,00 16,00 7,00 6,710
SC 8,00 16,00 7,00 6,710
SC 8,00 18,00 5,00 6,710
TC 8,00 18,00 6,00 7,045
SC 8,00 22,00 7,00 6,710
SC 9,00 22,00 7,00 6,710
SC 10,00 16,00 4,00 6,710
TC 10,00 18,00 4,00 7,045
TC 10,00 19,00 7,00 7,045
SC 10,00 22,00 4,00 6,710
SC 10,00 22,00 7,00 6,710
SC 10,00 26,00 7,00 6,710
TC 10,00 30,00 7,00 7,045
SB 11,00 17,00 4,00 7,381
TC 11,00 17,00 4,00 7,045
SC 12,00 22,00 4,00 6,710
SC 12,00 22,00 7,00 6,710
TC 12,00 22,00 7,00 7,045
SC 12,00 24,00 4,50 6,710
SC 12,00 24,00 6,00 6,710
SC 12,00 25,00 4,50 6,710
SC 12,00 28,00 7,00 6,710
SC 12,00 32,00 7,00 7,160
TC 12,00 32,00 7,00 7,515
TC 12,00 37,00 7,00 8,925
TC 13,00 25,00 7,00 7,045
TBCW 13,90 23,10 5,50 8,136
SC 14,00 24,00 7,00 6,710
SC 14,00 28,00 10,00 6,710
SC 15,00 24,00 5,00 6,710
SC 15,00 24,00 7,00 6,710
SC 15,00 25,00 5,00 6,710
SC 15,00 30,00 4,50 6,710
SC 15,00 30,00 7,00 6,710
SC 15,00 30,00 10,00 6,710
TC 15,00 32,00 5,00 7,515
SC 15,00 32,00 7,00 7,160
SC 15,00 35,00 7,00 7,160
TC 15,00 35,00 7,00 7,515
SC 15,00 42,00 7,00 9,245
SC 16,00 24,00 5,00 6,710
SC 16,00 28,00 7,00 6,710
SC 17,00 25,00 4,00 6,710
SC 17,00 26,00 6,00 6,710
SC 17,00 28,00 7,00 6,710
TC 17,00 28,00 7,00 7,045
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 17,00 28,00 7,30 6,710
SC 17,00 30,00 7,00 6,710
TC 17,00 30,00 7,00 7,045
SC 17,00 32,00 5,00 7,160
TC 17,00 32,00 5,00 7,515
SC 17,00 32,00 7,00 7,160
TC 17,00 32,00 7,00 7,515
SC 17,00 35,00 7,00 7,160
SC 17,00 35,00 7,00 7,160
TC 17,00 35,00 7,00 7,515
TC 17,00 40,00 7,00 8,925
SC 17,00 47,00 7,00 10,590
TC 18,00 28,00 7,00 7,045
TC 18,00 30,00 7,00 7,045
TC 18,00 32,00 7,00 7,515
SC 18,00 35,00 7,00 7,160
SC 18,00 35,00 10,00 7,160
TC 19,00 25,00 6,00 7,045
TC 19,00 42,00 7,00 9,710
TC 20,00 28,00 7,00 7,045
SC 20,00 30,00 4,00 6,710
SC 20,00 30,00 5,00 6,710
SC 20,00 30,00 7,00 6,710
TC 20,00 30,00 7,00 7,045
SBCW 20,00 31,00 7,20 9,050
TBCW 20,00 31,00 7,30 8,679
SC 20,00 32,00 7,00 7,160
SCW 20,00 32,00 7,00 7,518
TCW 20,00 32,00 7,00 7,890
SC 20,00 35,00 7,00 7,160
TC 20,00 35,00 7,00 7,515
TC 20,00 36,00 7,00 8,925
TC 20,00 40,00 7,00 8,925
TC 20,00 40,00 8,00 8,925
SC 20,00 42,00 6,00 9,245
TC 20,00 42,00 6,00 9,710
SC 20,00 42,00 7,00 9,245
TC 20,00 42,00 7,00 9,710
SB2 20,00 47,00 6,00 9,902
SC 20,00 47,00 7,00 10,590
TC 20,00 47,00 7,00 11,120
SC 20,00 48,00 7,00 10,590
SC 20,00 52,00 7,00 11,223
TC 20,00 62,00 7,00 13,112
SC 22,00 32,00 7,00 7,160
SC 22,00 35,00 7,00 7,160
TC 22,00 35,00 7,00 7,515
TC 22,00 36,00 7,00 8,925
Anelli di tenuta standard in FPMStandard shaft seals in FPM SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 22,00 40,00 7,00 8,272
TC 24,00 32,00 4,00 7,515
TC 24,00 35,00 7,00 7,515
TC 24,00 40,00 7,00 8,925
SC 25,00 35,00 5,00 7,160
SC 25,00 35,00 7,00 7,160
TC 25,00 35,00 7,00 7,515
TB2 25,00 35,00 7,00 7,026
TC 25,00 35,00 10,00 7,515
SB2 25,00 36,00 7,30 7,734
TBCW 25,00 36,00 7,30 10,308
SC 25,00 37,00 5,00 8,272
SC 25,00 37,00 7,00 8,272
SCW 25,00 37,00 7,00 8,685
HSC 25,00 37,00 7,00 8,272
TBCW 25,00 37,00 7,00 10,308
TC 25,00 38,00 7,00 8,925
SC 25,00 40,00 7,00 8,272
TC 25,00 40,00 7,00 8,925
SC 25,00 42,00 6,00 9,245
SC 25,00 42,00 7,00 9,245
TC 25,00 42,00 7,00 9,710
SC 25,00 46,00 7,00 10,589
SC 25,00 47,00 7,00 10,590
TC 25,00 47,00 7,00 11,120
TC 25,00 47,00 10,00 11,120
TC 25,00 50,00 7,00 11,120
SC 25,00 50,00 10,00 10,590
SC 25,00 52,00 7,00 11,223
TC 25,00 52,00 7,00 11,784
SC 25,00 52,00 10,00 11,223
SC 25,00 55,00 10,00 11,223
SC 25,00 62,00 7,00 12,488
TC 25,00 62,00 7,00 13,112
TC 25,00 62,00 8,00 13,112
SC 25,00 62,00 10,00 12,488
TC 25,00 62,00 10,00 13,112
TC 26,00 35,00 7,00 7,515
SC 27,00 37,00 7,00 8,272
TC 28,00 40,00 7,00 8,925
TC 28,00 42,00 7,00 9,710
TC 28,00 42,00 10,00 9,710
SC 28,00 47,00 7,00 10,590
TC 28,00 47,00 7,00 11,120
TC 30,00 40,00 6,00 8,925
SC 30,00 40,00 7,00 8,272
TC 30,00 40,00 7,00 8,925
TC 30,00 40,00 10,00 8,925Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
18
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 30,00 42,00 7,00 9,245
TC 30,00 42,00 7,00 9,710
SC 30,00 45,00 8,00 9,245
TC 30,00 47,00 6,00 11,120
SB2 30,00 47,00 6,50 9,901
SC 30,00 47,00 7,00 10,590
TC 30,00 47,00 7,00 11,120
SC 30,00 47,00 10,00 10,590
SC 30,00 50,00 7,00 10,590
SC 30,00 50,00 8,00 10,590
SC 30,00 50,00 10,00 10,590
SC 30,00 52,00 7,00 11,223
TC 30,00 52,00 7,00 11,784
SC 30,00 52,00 10,00 11,223
TC 30,00 52,00 10,00 11,784
SC 30,00 55,00 7,00 11,223
TC 30,00 55,00 7,00 11,784
SC 30,00 55,00 10,00 11,223
TC 30,00 55,00 10,00 11,784
SC 30,00 60,00 10,00 11,855
SC 30,00 62,00 7,00 12,488
TC 30,00 62,00 7,00 13,112
TC 30,00 62,00 10,00 13,112
SC 30,00 72,00 10,00 14,384
TC 30,00 72,00 10,00 15,103
TC 30,00 90,00 7,00 21,992
SB2 31,75 53,98 9,50 10,493
SC 32,00 47,00 7,00 10,590
HTCWR 32,00 42,00 7,00 9,707
SC 32,00 52,00 7,00 11,223
TC 34,50 52,00 11,00 11,784
SC 35,00 42,00 4,00 9,245
SCW 35,00 42,00 4,00 9,707
TC 35,00 42,00 6,00 9,710
SC 35,00 44,00 4,00 9,245
SC 35,00 47,00 7,00 10,590
TC 35,00 47,00 7,00 11,120
SC 35,00 50,00 7,00 10,590
SC 35,00 52,00 7,00 11,223
TC 35,00 52,00 7,00 11,784
SC 35,00 52,00 10,00 11,223
SC 35,00 55,00 8,00 11,223
SC 35,00 55,00 10,00 11,223
TC 35,00 55,00 10,00 11,784
SB2 35,00 56,00 8,00 11,084
TC 35,00 56,00 8,00 12,448
SC 35,00 56,00 10,00 11,855
SC 35,00 60,00 10,00 11,855
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TB2 44,45 63,50 12,70 12,259
TC 45,00 55,00 7,00 11,784
TC 45,00 58,00 7,00 12,448
SC 45,00 60,00 7,00 11,855
TC 45,00 60,00 7,00 12,450
SC 45,00 60,00 8,00 11,855
TC 45,00 60,00 8,00 12,450
SC 45,00 62,00 7,00 12,488
SC 45,00 62,00 8,00 12,488
TC 45,00 62,00 8,00 13,112
SC 45,00 65,00 8,00 12,488
TC 45,00 65,00 8,00 13,113
SC 45,00 65,00 10,00 12,488
TC 45,00 65,00 10,00 13,113
HTBCWR 45,00 65,00 10,00 14,420
SC 45,00 68,00 10,00 13,278
TC 45,00 68,00 10,00 13,278
SC 45,00 70,00 10,00 13,278
SC 45,00 72,00 8,00 14,384
TC 45,00 72,00 8,00 15,103
SC 45,00 75,00 8,00 14,384
TC 45,00 75,00 8,00 15,103
SC 45,00 75,00 10,00 14,384
TC 45,00 80,00 7,00 18,121
SC 45,00 80,00 10,00 17,258
SC 45,00 85,00 10,00 19,101
TC 45,00 85,00 10,00 20,056
TC 47,00 62,00 7,00 13,112
SC 48,00 62,00 8,00 12,488
TC 48,00 65,00 10,00 13,113
SC 48,00 72,00 10,00 14,384
TB 49,20 62,74 7,95 14,423
SC 50,00 65,00 8,00 12,488
TC 50,00 65,00 8,00 13,113
SC 50,00 68,00 8,00 13,278
TC 50,00 68,00 8,00 13,278
SC 50,00 70,00 10,00 13,278
TC 50,00 72,00 8,00 15,103
SC 50,00 72,00 10,00 14,384
TC 50,00 72,00 10,00 15,103
SC 50,00 80,00 8,00 17,258
TC 50,00 80,00 8,00 18,121
TC 50,00 80,00 10,00 18,121
SC 50,00 90,00 10,00 20,944
TC 50,00 90,00 10,00 21,992
SC 52,00 72,00 8,00 14,384
SC 55,00 70,00 8,00 13,278
TC 55,00 70,00 8,00 13,942
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 35,00 62,00 7,00 12,488
TC 35,00 62,00 7,00 13,112
SC 35,00 62,00 10,00 12,488
TC 35,00 62,00 10,00 13,112
SC 35,00 68,00 10,00 13,278
TC 35,00 72,00 7,00 15,103
SC 35,00 72,00 10,00 14,384
TC 35,00 72,00 10,00 15,103
TC 36,00 50,00 7,00 11,120
TC 36,00 52,00 7,00 11,784
SC 36,00 58,00 10,00 11,855
TC 36,50 47,63 6,35 11,120
TC 36,50 50,80 7,92 11,784
TC 38,00 52,00 7,00 11,784
SC 38,00 55,00 7,00 11,223
SC 38,00 62,00 7,00 12,488
TC 38,00 72,00 10,00 15,103
TC 40,00 52,00 7,00 11,784
SC 40,00 55,00 7,00 11,223
TC 40,00 55,00 7,00 11,784
TC 40,00 55,00 8,00 11,784
SC 40,00 56,00 8,00 11,855
TC 40,00 56,00 8,00 12,448
SC 40,00 60,00 7,00 11,855
SC 40,00 60,00 10,00 11,855
SC 40,00 62,00 7,00 12,488
TC 40,00 62,00 7,00 13,112
SC 40,00 62,00 8,00 12,488
TC 40,00 62,00 8,00 13,112
TB2 40,00 62,00 9,00 12,259
TC 40,00 62,00 10,00 13,112
SC 40,00 65,00 10,00 12,488
TC 40,00 65,00 10,00 13,113
SC 40,00 68,00 8,00 13,278
SC 40,00 68,00 10,00 13,278
TC 40,00 68,00 10,00 13,278
SC 40,00 72,00 7,00 14,384
TC 40,00 72,00 7,00 15,103
SC 40,00 72,00 10,00 14,384
TC 40,00 80,00 7,00 18,121
SC 40,00 80,00 10,00 17,258
TC 40,00 80,00 10,00 18,121
SC 40,00 90,00 12,00 20,944
TC 41,95 53,98 6,30 11,784
SC 42,00 55,00 8,00 11,223
TC 42,00 56,00 7,00 12,448
TC 42,00 62,00 8,00 13,112
SC 42,00 72,00 8,00 14,384
Anelli di tenuta standard in FPMStandard shaft seals in FPM SC TC
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
19
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TC 55,00 70,00 10,00 13,942
TC 55,00 72,00 8,00 15,103
SC 55,00 72,00 10,00 14,384
TC 55,00 72,00 10,00 15,103
HTB2R 55,00 75,00 9,00 14,121
SC 55,00 75,00 10,00 14,384
SC 55,00 80,00 8,00 17,258
TC 55,00 80,00 8,00 18,121
TC 55,00 80,00 10,00 18,121
TC 55,00 85,00 10,00 20,056
TC 55,00 90,00 8,00 21,992
SC 55,00 90,00 10,00 20,944
TC 55,00 90,00 10,00 21,992
TC 55,00 100,00 10,00 26,214
SC 56,00 70,00 8,00 13,278
TC 56,00 72,00 8,00 15,103
SC 56,00 85,00 8,00 19,101
TC 56,00 85,00 8,00 20,056
SC 58,00 72,00 8,00 14,384
SC 60,00 75,00 8,00 14,384
TC 60,00 75,00 8,00 15,103
SC 60,00 80,00 8,00 17,258
TC 60,00 80,00 8,00 18,121
SC 60,00 80,00 10,00 17,258
TC 60,00 80,00 10,00 18,121
SC 60,00 85,00 8,00 19,101
TC 60,00 85,00 8,00 20,056
HTBCWR 60,00 85,00 10,00 22,062
TC 60,00 90,00 8,00 21,992
SC 60,00 90,00 10,00 20,944
TC 62,00 80,00 9,00 18,121
TC 65,00 80,00 8,00 18,121
TC 65,00 85,00 8,00 20,056
SC 65,00 85,00 10,00 19,101
TC 65,00 85,00 10,00 20,056
SC 65,00 90,00 10,00 20,944
TC 65,00 90,00 10,00 21,992
SC 65,00 95,00 10,00 22,620
TC 65,00 100,00 8,00 26,214
TC 65,00 100,00 10,00 26,214
TC 65,00 100,00 13,00 26,214
TC 65,00 110,00 10,00 30,260
TC 65,00 120,00 13,00 36,946
SC 70,00 85,00 8,00 19,101
TC 70,00 85,00 8,00 20,056
SC 70,00 90,00 10,00 20,944
TC 70,00 90,00 10,00 21,992
SC 70,00 95,00 10,00 22,620
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 70,00 100,00 10,00 24,966
TC 70,00 100,00 10,00 26,214
TC 70,00 110,00 12,00 30,260
TC 70,00 125,00 12,00 40,113
SC 72,00 90,00 10,00 20,944
SC 72,00 95,00 10,00 22,620
SC 75,00 90,00 10,00 20,944
SC 75,00 95,00 10,00 22,620
TC 75,00 95,00 10,00 23,751
SC 75,00 95,00 12,00 22,620
SC 75,00 100,00 10,00 24,966
TC 75,00 100,00 10,00 26,214
SC 75,00 110,00 12,00 28,819
TC 75,00 110,00 12,00 30,260
SC 75,00 120,00 12,00 35,187
TC 75,00 120,00 12,00 36,946
SC 75,00 130,00 13,00 42,023
TC 75,00 130,00 13,00 44,159
SC 80,00 100,00 10,00 24,966
TC 80,00 100,00 10,00 26,214
TC 80,00 110,00 10,00 30,260
SC 80,00 110,00 12,00 28,819
TC 80,00 110,00 12,00 30,260
TC 80,00 140,00 13,00 49,965
TC 85,00 105,00 13,00 27,946
SC 85,00 110,00 12,00 28,819
TC 85,00 110,00 12,00 30,260
SC 85,00 120,00 12,00 35,187
TC 85,00 120,00 12,00 36,946
TCI 85,00 125,00 12,00 40,113
SC 90,00 110,00 10,00 28,819
SC 90,00 110,00 12,00 28,819
TC 90,00 110,00 12,00 30,260
SC 90,00 120,00 12,00 35,187
TC 90,00 120,00 12,00 36,946
TC 90,00 130,00 12,00 44,159
TCI 90,00 140,00 10,00 49,965
TC 92,00 120,00 12,00 36,946
TC 95,00 115,00 13,00 35,000
SC 95,00 120,00 12,00 35,187
TC 95,00 120,00 12,00 36,946
TC 95,00 135,00 13,00 52,325
SC 100,00 120,00 12,00 35,187
TC 100,00 120,00 12,00 36,946
TC 100,00 125,00 12,00 40,113
SC 100,00 130,00 12,00 42,023
TC 100,00 130,00 12,00 44,159
TC 100,00 150,00 13,00 58,411
Anelli di tenuta standard in FPMStandard shaft seals in FPM SC TC
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
SC 105,00 130,00 12,00 42,023
TC 105,00 130,00 12,00 44,159
TC 105,00 130,00 13,00 44,159
SC 110,00 130,00 12,00 42,023
TC 110,00 130,00 12,00 44,159
SC 110,00 140,00 12,00 51,825
SC 115,00 135,00 10,00 44,821
SC 115,00 140,00 12,00 51,825
TC 115,00 140,00 12,00 49,965
TC 115,00 150,00 12,00 58,411
SC 120,00 150,00 12,00 55,629
TC 120,00 150,00 12,00 58,411
TC 120,00 170,00 12,00 72,837
TCI 120,00 180,00 13,00 83,041
SC 130,00 160,00 12,00 63,950
SC 130,00 170,00 12,00 69,369
TC 130,00 170,00 12,00 72,837
TC 130,00 200,00 12,00 97,708
SC 135,00 160,00 12,00 63,950
SC 140,00 170,00 12,00 69,369
TC 140,00 170,00 12,00 72,837
TC 140,00 170,00 15,00 72,837
TC 145,00 170,00 15,00 72,837
TC 150,00 170,00 15,00 72,837
HTBCW 150,00 170,00 15,00 84,126
TC 150,00 180,00 13,00 83,041
SC 150,00 180,00 15,00 79,087
TC 160,00 180,00 10,00 83,041
SC 160,00 190,00 15,00 93,270
TC 160,00 190,00 15,00 98,523
SC 170,00 200,00 15,00 105,500
TC 180,00 210,00 15,00 120,793
SC 200,00 230,00 15,00 142,250
TC 200,00 230,00 15,00 152,825
TC 210,00 250,00 15,00 180,050
TC 220,00 250,00 15,00* 180,050
TC 230,00 260,00 15,00 187,570
TC 240,00 270,00 15,00 195,100
TC 250,00 280,00 15,00 257,250
TC 260,00 300,00 20,00 334,433
TC 280,00 320,00 20,00 478,400
SC 300,00 340,00 18,00* 440,000
SC 320,00 360,00 18,00* 480,000
TC 320,00 360,00 18,00 728,500
SC 360,00 400,00 20,00 870,000
SC 400,00 440,00 20,00 1.050,000
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
20
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCV 8,00 22,00 6,40 1,480
TCV 10,00 20,00 4,00 1,480
TCV 10,00 26,00 7,00 1,480
TCP 12,00 22,00 6,00 1,830
TCP 12,00 28,00 6,00 2,198
TCP 12,00 26,00 6,00 2,198
TCV 12,00 22,00 6,00 1,480
TCV 12,00 20,00 5,00 1,480
TCV 12,00 22,00 6/6,5 1,775
TCP 12,00 22,00 6,00 2,198
TCHP 12,70 22,23 6,40 2,818
TCP 12,70 19,05 4,20 1,830
TCP 12,70 22,23 6,40 1,830
TB2P 15,00 26,00 4/4,5 1,830
SCP 15,00 35,00 7,00 2,233
TB2V 17,00 35,00 8,00 1,578
HTCPWR 17,45 30,00 6,00 2,198
SCV 17,45 28,58 6,35 1,409
SCP 17,45 28,58 6,35 1,744
TCP 17,46 28,58 6,30 1,830
SCV 18,00 24,00 4,00 1,409
TCHP 18,00 30,00 7,00 2,818
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCP 6,00 16,00 5,00 9,158
TCP 9,00 22,00 7,00 9,158
TCP 10,00 22,00 7,00 9,158
TCP 12,00 22,00 6,00 9,158
SCV 17,46 28,58 6,35 7,045
TCP 17,46 28,58 6,35 9,158
TCP 18,00 30,00 7,00 9,158
SCP 19,05 28,58 6,35 8,723
TCV 20,00 30,00 7,00 7,397
TCP 25,00 35,00 6/6,5 9,769
HTCPWI 25,00 35,00 6/6,5 9,769
TCVW 25,00 36,00 7,30 9,371
TB2V 31,75 50,80 11,10 12,373
TB2V 31,75 63,55 12,70 13,767
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCHP 45,00 65,00 7,00 5,246
HTCPW 45,00 75,00 8/8,5 3,927
TCP 50,00 65,00 8,00 3,408
TB2V 52,00 80,00 13,00 3,805
SCV 55,00 90,00 8,00 4,398
TCP 55,00 68,00 8,00 3,624
TCP 55,00 85,00 8,00 5,214
TCP 55,00 68,00 7/7,5 3,624
TCHP 56,00 72,00 8,00 6,042
SCHP 60,00 80,00 7/6 6,904
TCP 60,00 90,00 7/7,5 5,717
TCP 65,00 80,00 7,00 4,711
TCP 70,00 92,00 12,00 6,175
TCP 73,00 90,00 7/7,5 5,717
TCP 75,00 90,00 10/10,5 5,717
SCHP 80,00 100,00 8/6 9,986
TCP 90,00 110,00 12/13 7,867
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCP 70,00 92,00 12,00 30,876
TCP 75,00 90,00 10/11 28,589
TCP 80,00 100,00 10,00 34,078
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCPY 18,00 30,00 7,00 1,830
SCP 19,05 28,58 6,40 1,744
SCV 20,00 42,00 7,00 1,941
SCP 20,00 35,00 5,30 1,861
TBRV 22,00 35,00 8,00 1,578
TCV 24,00 40,00 7,00 1,822
TCP 24,00 40,00 7,00 2,256
TCP 25,00 40,00 6/6,5 2,256
TBP 25,00 45,00 10,00 2,524
TCP 29,36 42,82 7,90 2,524
TCP 30,00 42,00 7,00 3,029
TCP 32,00 42,00 7,00 2,524
SCHP 33,00 45,00 6,00 3,698
TCV 35,00 50,00 10,00 2,335
SCHP 35,00 52,00 5,00 4,490
TCP 35,00 45,00 7,00 2,524
TCP 35,00 50,00 10,00 2,891
TCP 35,00 47,00 6/6,5 2,891
TCP 38,00 50,00 7,00 2,891
TCP 40,00 52,00 7/7,5 3,064
TCP 40,00 60,00 7,00 3,237
TCP 41,28 60,32 9,50 3,408
TipoType
Dimensioni Dimensions (mm)
€Diametro Diameter AltezzaWidhtInterno
InternalEsternoExternal
TCP 35,00 47,00 6,00 14,456
TCP 35,00 47,00 6/6.5 14,456
HTCP 35,00 47,00 7,00 14,456
TCP 35,00 52,00 7,00 15,319
TCP 38,00 52,00 7,00 15,319
TB2P 38,10 58,73 12,70 16,182
TCV 40,00 52,00 7,00 12,373
TCV 40,00 62,00 8,00 13,767
SCV 44,45 63,50 7,90 13,112
TCHP 45,00 65,00 7,00 26,226
TCV 45,00 65,00 8,00 13,768
TBRP 49,00 62,80 7,90 17,045
TCP 55,00 68,00 7/7,5 17,261
TCP 70,00 85,00 8,00 26,072
Anelli di tenuta per alte pressioni in NBRShaft seals for high pressure in NBR
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
SCV TCV
Anelli di tenuta per alte pressioni in FPMShaft seals for high pressure in FPM SCV TCV
21
Anelli di tenuta per bussole di scorrimentoSeals for sliding ball bushing
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VCW 6,00 15,00 3,30 NBR 1,589
VCW 7,00 15,00 5,00 NBR 1,589
VCW 8,00 12,00 3,00 NBR 1,589
VCW 8,00 14,00 4,00 NBR 1,589
VCW 8,00 15,00 3,00 NBR 1,589
VCW 9,00 13,00 3,00 NBR 1,589
VCW 9,00 16,00 3,00 NBR 1,589
VCW 10,00 14,00 3,00 NBR 1,589
VCW 10,00 17,00 3,00 NBR 1,589
VCW 10,00 29,70 3,00 NBR 1,589
VCW 12,00 16,00 3,00 NBR 1,589
VCW 12,00 18,00 3,00 NBR 1,589
VCW 12,00 19,00 3,00 NBR 1,589
VCW 12,00 29,55 3,00 NBR 1,720
VCW 12,00 29,70 3,00 NBR 1,720
VCW 13,00 19,00 3,00 NBR 1,589
VCW 14,00 20,00 3,00 NBR 1,589
VCW 14,00 21,00 3,00 NBR 1,589
VCW 14,00 22,00 3,00 NBR 1,589
VCW 14,00 22,00 4,00 NBR 1,589
VCW 15,00 21,00 3,00 NBR 1,589
VCW 16,00 22,00 3,00 NBR 1,589
VCW 16,00 24,00 3,00 NBR 1,589
VCW 16,00 25,00 3,00 NBR 1,589
VCW 17,00 23,00 3,00 NBR 1,589
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VC 5,00 11,00 3,00 NBR 1,589
VC 7,80 13,70 2,50 NBR 1,589
VC 10,00 17,00 3,50 NBR 1,589
VC 12,00 17,00 6,00 NBR 1,589
VC 12,70 19,05 3,17 NBR 1,589
VC 12,80 19,40 2,50 NBR 1,589
VC 13,00 26,00 4,00 NBR 1,589
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VCW 17,00 25,00 3,00 NBR 1,589
VCW 18,00 24,00 3,00 NBR 1,589
VCW 18,00 24,00 4,00 NBR 1,589
VCW 20,00 26,00 4,00 NBR 1,720
VCW 20,00 28,00 4,00 NBR 1,720
VCW 22,00 28,00 4,00 NBR 1,720
VCW 22,00 30,00 4,00 NBR 1,720
VCW 24,00 32,00 4,00 NBR 2,012
VCW 25,00 32,00 4,00 NBR 2,012
VCW 25,00 34,00 4,00 NBR 2,012
VCW 25,00 35,00 4,00 NBR 2,012
VCW 27,00 35,00 4,00 NBR 2,012
VCW 28,00 35,00 4,00 NBR 2,012
VCW 28,00 37,00 4,00 NBR 2,278
VCW 30,00 37,00 4,00 NBR 2,278
VCW 30,00 38,00 4,00 NBR 2,278
VCW 30,00 40,00 4,00 NBR 2,278
VCW 31,00 38,00 4,00 NBR 2,278
VCW 32,00 42,00 4,00 NBR 2,522
VCW 33,00 40,00 3,00 NBR 2,278
VCW 35,00 42,00 4,00 NBR 2,522
VCW 35,00 45,00 4,00 NBR 2,522
VCW 38,00 45,00 4,00 NBR 2,522
VCW 38,00 48,00 4,00 NBR 2,799
VCW 40,00 47,00 4,00 NBR 2,799
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VC 15,00 23,00 3,00 NBR 1,589
VC 16,00 20,00 2,50 NBR 1,589
VC 16,00 22,30 2,40 NBR 1,589
VC 16,00 22,70 2,00 NBR 1,589
VC 16,00 25,00 5,00 NBR 1,589
VC 17,00 22,00 5,00 NBR 1,589
VC 20,40 27,15 2,00 NBR 1,720
VCW
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VCW 40,00 50,00 4,00 NBR 2,799
VCW 40,00 52,00 5,00 NBR 3,061
VCW 45,00 52,00 4,00 NBR 3,061
VCW 46,00 54,00 4,00 NBR 3,061
VCW 50,00 58,00 4,00 NBR 3,164
VCW 50,00 62,00 5,00 NBR 3,290
VCW 70,00 78,00 4,00 NBR 3,901
VCW 70,00 78,00 5,00 NBR 3,901
VCW 12,00 19,00 3,00 FPM 7,945
VCW 15,00 21,00 3,00 FPM 7,945
VCW 16,00 24,00 3,00 FPM 7,945
VCW 20,00 28,00 4,00 FPM 8,602
VCW 25,00 35,00 4,00 FPM 10,059
VCW 35,00 45,00 4,00 FPM 12,610
VCW 40,00 50,00 4,00 FPM 13,995
VCW 50,00 62,00 5,00 FPM 16,452
VCW 70,00 78,00 5,00 FPM 19,507
VCW 40,00 47,00 4,00 FPM 13,995
VCW 63,00 75,00 5,00 FPM 19,505
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VC 42,00 52,00 4,00 NBR 3,061
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
Anelli di tenuta per bussole di scorrimentoSeals for sliding ball bushing VC
22
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
Anelli di tenuta per bussole di scorrimentoSeals for sliding ball bushing VB
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VB 5,00 9,00 2,00 NBR 1,953
VB 6,00 10,00 2,00 NBR 1,953
VB 6,00 12,00 2,00 NBR 1,953
VB 7,00 11,00 2,00 NBR 1,953
VB 8,00 12,00 3,00 NBR 1,953
VB 9,52 14,23 2,40 NBR 1,953
VB 10,00 14,00 3,00 NBR 1,953
VB 10,00 15,00 3,00 NBR 1,953
VB 10,00 16,00 4,00 NBR 1,953
VB 11,00 17,00 3,00 NBR 1,953
VB 12,00 16,00 3,00 NBR 1,953
VB 12,00 18,00 3,00 NBR 1,953
VB 14,00 18,00 3,00 NBR 1,953
VB 14,00 20,00 3,00 NBR 1,953
VB 14,00 22,00 4,00 NBR 1,953
VB 16,00 22,00 3,00 NBR 1,953
VB 17,00 23,00 3,00 NBR 1,953
VB 18,00 26,00 4,00 NBR 1,589
VB 20,00 26,00 4,00 NBR 2,099
VB 20,00 28,00 4,00 NBR 2,099
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 12,00 5,00 NBR 1,422
EC 13,00 4,5 NBR 1,422
EC 14,00 4,00 NBR 1,422
EC 16,00 4,00 NBR 1,422
EC 18,00 4,00 NBR 1,422
EC 19,00 7,00 NBR 1,422
EC 20,00 4,00 NBR 1,422
EC 22,00 4,00 NBR 1,422
EC 22,00 5,00 NBR 1,422
EC 22,00 7,00 NBR 1,422
EC 24,00 7,00 NBR 1,422
EC 25,00 5,00 NBR 1,422
EC 26,00 6,5 NBR 1,422
EC 28,00 4,00 NBR 1,512
EC 28,00 5,00 NBR 1,512
EC 28,00 7,00 NBR 1,512
EC 30,00 5,00 NBR 1,512
EC 30,00 6,00 NBR 1,512
EC 30,00 8,00 NBR 1,512
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VBY 21,00 28,70 3,5/5,7 NBR 2,099
VB 22,00 30,00 4,00 NBR 2,099
VB 25,00 32,00 4,00 NBR 2,493
VB 25,40 31,75 3,20 NBR 2,493
VBY 27,00 33,70 3,5/5,7 NBR 2,493
VB 27,00 35,00 4,00 NBR 2,493
VB 28,00 35,00 3,00 NBR 2,493
VB 28,00 35,00 4,00 NBR 2,493
VB 28,00 35,00 2,50 NBR 2,493
VB2 28,58 41,25 6,40 NBR 3,222
VB 30,00 37,00 4,00 NBR 2,886
VB 30,00 35,00 3,00 NBR 2,493
VB 32,00 42,00 4,00 NBR 3,222
VB 34,00 41,00 4,00 NBR 3,222
VBY 34,00 41,20 3,5/4,7 NBR 3,222
VB 34,79 44,45 4,82 NBR 3,222
VB 35,00 41,00 2,50 NBR 3,222
VBY 35,00 42,00 3,5/5,7 NBR 3,222
VB2 39,69 52,39 5,30 NBR 3,953
VB 40,00 47,00 4,00 NBR 3,615
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 32,00 5,00 NBR 1,589
EC 32,00 7,00 NBR 1,589
EC 32,00 9,50 NBR 1,589
EC 35,00 5,00 NBR 1,683
EC 35,00 7,00 NBR 1,683
EC 35,00 8,00 NBR 1,683
EC 37,00 5,00 NBR 1,683
EC 37,00 7,00 NBR 1,863
EC 38,00 10,00 NBR 1,863
EC 40,00 5,00 NBR 1,863
EC 40,00 7,00 NBR 1,863
EC 42,00 7,00 NBR 1,863
EC 42,00 9,50 NBR 1,863
EC 43,00 13,00 NBR 1,863
EC 45,00 5,00 NBR 1,958
EC 45,29 6,40 NBR 1,958
EC 47,00 4,00 NBR 1,958
EC 47,00 5,00 NBR 1,958
EC 47,00 7,00 NBR 1,958
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
VBY 41,28 49,50 4/6,2 NBR 3,615
VB 42,00 52,00 4,00 NBR 3,953
VBY 43,00 52,00 3,5/5,5 NBR 3,953
VBY 44,70 54,00 6/8,5 NBR 3,953
VB 45,00 50,00 3,00 NBR 3,615
VB 45,00 52,00 4,00 NBR 3,953
VBY 45,00 60,00 6,5/8 NBR 4,080
VB 50,00 58,00 4,00 NBR 4,080
VBY 50,80 59,00 4/6,2 NBR 4,080
VB2 52,00 68,00 6,00 NBR 4,470
VBY 53,00 60,00 4/6 NBR 4,080
VB 71,42 98,45 4,78 NBR 6,983
VBR 5,00 10,00 4,00 FPM 7,945
VBR 6,00 12,70 3,80 FPM 7,945
VB 38,00 48,00 4,00 FPM 18,075
VBCR 95,00 120,00 4/7 FPM 45,743
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 47,00 8,00 NBR 1,958
ECY 47/53 8,00 NBR 2,175
EC 47,00 10,00 NBR 1,958
EC 47,00 13,00 NBR 1,958
EC 50,00 7,00 NBR 2,034
EC 50,00 9,00 NBR 2,034
EC 52,00 7,00 NBR 2,034
EC 52,00 8,00 NBR 2,034
ECY 52/58 8,00 NBR 2,260
EC 52,00 10,00 NBR 2,034
EC 55,00 4,00 NBR 2,214
EC 55,00 7,00 NBR 2,214
EC 55,00 10,00 NBR 2,214
EC 56,00 10,00 NBR 2,214
EC 58,75 7,90 NBR 2,214
EC 60,00 7,00 NBR 2,214
EC 62,00 7,00 NBR 2,214
EC 62,00 8,00 NBR 2,214
EC 62,00 9,50 NBR 2,214
Tappi di chiusuraEnd covers EC ECW ECY
23
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 65,00 10,00 NBR 3,195
EC 68,00 8,00 NBR 3,195
EC 70,00 10,00 NBR 3,195
EC 72,00 7,00 NBR 3,195
ECW 72,00 8,50 NBR 3,195
EC 72,00 9,00 NBR 3,195
EC 72,00 10,00 NBR 3,195
EC 75,00 7,00 NBR 3,636
EC 80,00 10,00 NBR 3,636
EC 80,00 12,00 NBR 3,636
EC 83,00 7,00 NBR 3,987
EC 85,00 10,00 NBR 3,987
EC 85,00 12,00 NBR 3,987
TipoType
Ø AlberoØ Shaft(mm)
€
VA 3 0,397
VA 4 0,406
VA 5 0,414
VA 6 0,422
VA 7 *
VA 8 0,439
VA 10 0,447
VA 12 0,455
VA 14 0,463
VA 16 0,472
VA 18 0,480
VA 20 0,571
VA 22 0,612
VA 25 0,629
VA 28 0,770
VA 30 0,786
VA 32 0,819
VA 35 0,861
VA 38 0,919
VA 40 1,001
VA 45 1,018
VA 50 1,208
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 88,90 9,50 NBR 3,987
EC 90,00 7,00 NBR 4,428
EC 90,00 10,00 NBR 4,428
EC 90,00 12,00 NBR 4,428
EC 95,00 10,00 NBR 5,700
EC 100,00 10,00 NBR 5,130
EC 100,00 12,00 NBR 5,130
EC 110,00 10,00 NBR 5,670
EC 110,00 12,00 NBR 5,670
EC 120,00 12,00 NBR 7,020
EC 125,00 12,00 NBR 8,433
EC 130,00 12,00 NBR 10,170
EC 140,00 12,00 NBR 10,539
TipoType
Ø AlberoØ Shaft(mm)
€
VA 55 1,217
VA 60 1,399
VA 65 1,423
VA 70 1,605
VA 75 1,821
VA 80 1,969
VA 85 2,201
VA 90 2,218
VA 95 2,605
VA 100 2,605
VA 110 3,211
VA 120 3,479
VA 130 4,080
VA 140 4,616
VA 150 5,077
VA 160 5,468
VA 170 6,640
VA 180 8,200
VA 190 8,980
VA 199 9,765
VA 200 16,054
VA 220 17,626
TipoType
Dimensioni (mm) Dimensions (mm) Note €
Diametro Diameter
AltezzaWidht
EC 140,00 15,00 NBR 10,539
EC 150,00 15,00 NBR 13,752
EC 160,00 15,00 NBR 16,200
EC 165,00 12,00 NBR 19,980
EC 170,00 15,00 NBR 19,980
EC 180,00 12,00 NBR 20,700
EC 200,00 13,00 NBR 25,965
EC 210,00 15,00 NBR 29,970
EC 225,00 14,00 NBR 34,110
EC 230,00 14,00 NBR 35,460
EC 240,00 15,00 NBR 38,160
EC 30,00 5,00 FPM 7,560
TipoType
Ø AlberoØ Shaft(mm)
€
VA 250 18,867
VA 275 22,012
VA 300 24,500
VA 325 26,540
VA 350 28,584
VA 375 44,685
VA 400 52,464
VA 450 *
VA 500 *
VA 550 *
VA 600 *
VA 650 *
VA 700 *
VA 725 *
VA 800 *
VA 850 *
VA 950 *
VA 1000 *
VA 1050 *
VA 1100 *
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
V-Ring in NBRV-Ring in NBR
Tappi di chiusuraEnd covers EC
VA
ECW
VS
ECY
VL
* Disponibile su richiesta Available on request
24
V-Ring in NBRV-Ring in NBR
TipoType
Ø AlberoØ Shaft(mm)
€
VS 5 0,397
VS 6 0,397
VS 7 0,406
VS 8 0,414
VS 10 0,422
VS 12 0,439
VS 14 0,497
VS 16 0,513
VS 18 0,571
VS 20 0,629
VS 22 0,778
VS 25 0,828
VS 28 0,869
VS 30 0,910
VS 32 1,010
VS 35 1,059
VS 38 1,159
VS 40 1,208
VS 45 1,258
VS 50 1,307
TipoType
Ø AlberoØ Shaft(mm)
€
VA 6 1,558
VA 8 1,672
VA 14 2,660
VA 16 3,230
VA 20 3,667
VA 22 4,104
VA 25 4,218
VA 28 4,769
VA 30 5,130
VA 32 5,662
VA 35 5,662
VA 38 6,004
VA 40 6,897
VA 45 9,443
VA 50 9,690
VA 55 11,001
VA 60 11,115
VA 65 11,780
TipoType
Ø AlberoØ Shaft(mm)
€
VS 55 1,341
VS 60 1,523
VS 65 1,548
VS 70 1,787
VS 75 2,003
VS 80 2,085
VS 85 2,418
VS 90 2,418
VS 95 2,605
VS 100 2,648
VS 110 3,674
VS 120 4,303
VS 130 4,386
VS 140 4,634
VS 150 4,972
VS 160 6,703
VS 170 7,034
VS 180 8,592
VS 190 9,374
VS 199 10,155
TipoType
Ø AlberoØ Shaft(mm)
€
VA 70 14,440
VA 75 15,523
VA 80 17,556
VA 90 20,330
VA 95 21,888
VA 100 23,275
VA 110 32,547
VA 120 33,231
VA 130 40,851
VA 160 61,560
VA 180 96,930
VA 199 124,630
VA 220 183,217
VA 300 274,892
VS 20 5,605
VS 22 6,555
VS 25 6,954
TipoType
Ø AlberoØ Shaft(mm)
€
VL 130 *
VL 140 4,752
VL 150 5,086
VL 160 5,298
VL 170 5,815
VL 180 5,885
VL 190 8,592
VL 200 15,307
VL 220 15,455
VL 250 17,617
VL 275 19,816
VL 300 22,022
VL 325 25,284
VL 350 27,675
VL 375 30,592
VL 400 33,036
TipoType
Ø AlberoØ Shaft(mm)
€
VS 28 7,562
VS 30 7,980
VS 35 8,740
VS 38 8,930
VS 40 9,120
VS 45 9,671
VS 50 10,336
VS 55 11,780
VS 60 11,780
VS 65 13,775
VS 70 18,221
VS 75 19,000
VS 80 21,451
VS 85 23,104
VS 90 24,662
VS 100 34,105
VS 110 34,333
VS VL
V-Ring in FPMV-Ring in FPM VA VS
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
* Disponibile su richiesta Available on request
25
RaschiatoriWipers
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
GA GC DSI
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
DSI 12,00 18,00 5/3 NBR 1,958
DSI 16,00 22,00 5/3 NBR 1,958
DSI 18,00 24,00 5/3 NBR 1,958
DSI 20,00 28,00 7/5 NBR 1,958
DSI 22,00 30,00 7/5 NBR 1,958
DSI 25,00 33,00 7/5 NBR 2,023
DSI 28,00 36,00 7/5 NBR 2,023
DSI 28,00 38,00 7/5 NBR 2,622
DSI 30,00 38,00 7/5 NBR 2,622
DSI 32,00 40,00 7/5 NBR 2,622
DSI 35,00 43,00 7/5 NBR 2,622
DSI 36,00 44,00 7/5 NBR 2,622
DSI 40,00 48,00 7/5 NBR 2,622
DSI 42,00 50,00 7/5 NBR 2,622
DSI 45,00 55,00 7/5 NBR 2,809
DSI 50,00 60,00 7/5 NBR 3,034
DSI 55,00 65,00 7/5 NBR 3,408
DSI 56,00 66,00 7/5 NBR 3,408
DSI 60,00 70,00 7/5 NBR 3,408
DSI 63,00 73,00 7/5 NBR 3,820
DSI 65,00 75,00 7/5 NBR 3,820
DSI 70,00 78,00 7/5 NBR 3,820
DSI 70,00 80,00 7/5 NBR 3,820
DSI 75,00 87,00 12/7 NBR 4,008
DSI 80,00 92,00 12/7 NBR 4,232
DSI 85,00 97,00 12/7 NBR 4,420
DSI 90,00 102,00 12/7 NBR 4,832
DSI 95,00 107,00 12/7 NBR 5,019
DSI 100,00 112,00 12/7 NBR 5,244
DSI 105,00 117,00 12/7 NBR 5,843
DSI 115,00 127,00 12/7 NBR 6,030
DSI 125,00 137,00 12/7 NBR 7,828
DSI 130,00 142,00 12/7 NBR 8,053
DSI 135,00 147,00 12,5/7 NBR 8,053
DSI 140,00 155,00 16/10 NBR 8,465
DSI 145,00 157,00 12,5/7 NBR 8,465
DSI 170,00 185,00 16/10 NBR 15,094
DSI 200,00 220,00 18/10 NBR 38,192
GA 10,00 16,00 3/4,5 NBR 1,437
GA 12,00 20,00 6/4 NBR 1,437
GA 14,00 22,00 4/3 NBR 1,437
GA 16,00 22,00 4/3 NBR 1,437
GA 16,00 26,00 8/5 NBR 1,437
GA 20,00 28,00 5/3 NBR 1,437
GA 20,00 30,00 10/7 NBR 1,437
GA 25,00 35,00 10/7 NBR 1,642
GA 30,00 40,00 8/5 NBR 1,711
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
GA 35,00 45,00 10/7 NBR 2,122
GA 40,00 50,00 8/5 NBR 2,258
GA 40,00 50,00 10/7 NBR 2,258
GA 45,00 55,00 10/7 NBR 2,600
GA 50,00 60,00 10/7 NBR 2,942
GA 50,00 65,00 8/5 NBR 3,216
GA 55,00 65,00 10/7 NBR 3,216
GA 56,00 65,00 7/5 NBR 3,216
GA 60,00 70,00 10/7 NBR 3,284
GA 65,00 75,00 10/7 NBR 4,311
GA 70,00 80,00 10/7 NBR 4,721
GA 75,00 85,00 10/7 NBR 4,721
GA 80,00 88,00 10/7 NBR 6,014
GA 80,00 90,00 10/7 NBR 6,014
GA 90,00 100,00 10/7 NBR 6,682
GA 95,00 105,00 10/7 NBR 6,774
GA 100,00 110,00 10/7 NBR 7,117
GA 110,00 120,00 10/7 NBR 8,895
GA 120,00 130,00 10/7 NBR 10,127
GA 30,00 40,00 8/5 FPM 9,505
GA 130,00 145,00 9/12 FPM 56,260
GC 6,00 13,00 3/4 NBR 1,367
GC 6,00 13,00 3,5/4,5 NBR 1,367
GC 8,00 14,00 3,5/5 NBR 1,367
GC 10,00 16,00 3,5/5 NBR 1,367
GC 12,00 18,00 3,5/5 NBR 1,367
GC 14,00 20,00 3,5/5 NBR 1,367
GC 15,00 21,00 3,5/5 NBR 1,367
GC 15,00 25,00 8/5 NBR 1,367
GC 16,00 22,00 3,5/5 NBR 1,367
GC 16,00 26,00 8/5 NBR 1,367
GC 18,00 24,00 7/4 NBR 1,367
GC 18,00 28,00 7/5 NBR 1,367
GC 20,00 30,00 7/5 NBR 1,367
GC 20,00 30,00 10/7 NBR 1,367
GC 22,00 32,00 7/5 NBR 1,367
GC 22,00 32,00 10/7 NBR 1,367
GC 24,00 35,00 8/5 NBR 1,692
GC 25,00 32,00 7/5 NBR 1,692
GC 25,00 35,00 7/5 NBR 1,692
GC 25,00 35,00 10/7 NBR 1,692
GC 26,00 35,00 10/7 NBR 1,692
GC 28,00 38,00 7/5 NBR 1,692
GC 30,00 40,00 7/5 NBR 1,692
GC 30,00 40,00 10/7 NBR 1,692
GC 30,00 45,00 10/7 NBR 1,953
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
GC 32,00 42,00 7/5 NBR 1,953
GC 35,00 45,00 10/7 NBR 1,953
GC 36,00 45,00 10/7 NBR 1,953
GC 36,00 46,00 7/5 NBR 1,953
GC 38,00 48,00 10/7 NBR 1,953
GC 40,00 50,00 8/5 NBR 1,953
GC 40,00 50,00 10/7 NBR 1,953
GC 45,00 55,00 7/5 NBR 2,474
GC 45,00 55,00 10/7 NBR 2,474
GC 50,00 60,00 7/5 NBR 2,727
GC 50,00 60,00 10/7 NBR 2,727
GC 55,00 65,00 7/5 NBR 2,727
GC 55,00 65,00 10/7 NBR 2,727
GC 60,00 70,00 7/5 NBR 3,319
GC 60,00 70,00 10/7 NBR 3,319
GC 65,00 75,00 7/5 NBR 4,166
GC 65,00 75,00 10/7 NBR 4,166
GC 70,00 80,00 7/5 NBR 4,166
GC 70,00 80,00 10/7 NBR 4,166
GC 75,00 83,00 10/7 NBR 4,166
GC 75,00 85,00 10/7 NBR 4,166
GC 80,00 88,00 10/7 NBR 4,166
GC 80,00 90,00 10/7 NBR 4,166
GC 85,00 95,00 10/7 NBR 5,602
GC 90,00 100,00 10/7 NBR 6,106
GC 100,00 110,00 10/7 NBR 7,636
GC 100,00 120,00 10/7 NBR 10,349
GC 110,00 120,00 10/7 NBR 10,349
GC 120,00 130,00 10/7 NBR 12,047
GC 130,00 145,00 12/9 NBR 16,329
GC 140,00 155,00 12/9 NBR 18,279
GC 150,00 165,00 12/9 NBR 20,880
GC 160,00 175,00 12/9 NBR 22,754
GC 10,00 20,00 8/5 FPM 7,590
GC 18,00 24,00 7/4 FPM 7,590
GC 18,00 28,00 7/5 FPM 7,590
GC 22,00 32,00 7/5 FPM 7,590
GC 25,00 35,00 7/5 FPM 9,400
GC 40,00 50,00 7/10 FPM 10,850
GC 40,00 50,00 8/5 FPM 10,850
GC 45,00 55,00 7/5 FPM 13,740
GC 60,00 70,00 5/7 FPM 18,440
GC 70,00 80,00 7/5 FPM 23,145
26
Bonded sealsBonded seals BO-1
Ulteriori dimensioni, fornibili a richiesta, sono presenti sul catalogo tecnico TTOAdditional dimensions, available on request, are present on the TTO Technical catalogue.
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
1 3,05 6,35 1,20 0,454
301 3,60 7,50 1,00 0,454
201 4,10 7,20 1,00 0,433
2 4,12 7,26 1,20 0,454
202 4,50 7,00 1,00 0,433
302 4,60 9,00 1,00 M4 0,454
3 5,21 8,38 1,20 0,461
303 5,60 10,00 1,00 0,461
203 5,70 9,00 1,00 M5 0,425
204 5,70 10,00 1,00 0,461
205 6,20 9,20 1,00 0,454
304 6,60 11,00 1,00 0,461
206 6,70 10,00 1,00 0,461
207 6,70 11,00 1,00 M6 0,461
208 6,70 11,00 2,50 0,579
305 6,85 13,27 1,30 0,482
4 6,86 13,21 1,20 0,522
5 6,99 13,34 1,20 0,522
306 7,00 11,40 1,00 0,461
209 7,10 12,00 1,00 0,461
210 7,30 10,20 1,00 0,461
519 8,30 12,70 1,20 0,522
6 8,31 13,34 1,20 0,522
211 8,50 13,40 1,00 0,472
307 8,60 13,00 1,00 0,472
7 8,64 14,22 1,20 M8 0,522
212 8,70 13,00 1,00 M8 0,472
213 8,70 14,00 1,00 0,472
214 8,70 16,00 1,00 0,482
215 9,30 13,30 1,00 0,472
216 10,35 16,00 2,00 0,564
20 10,37 15,88 2,00 ¹/” 0,588
510 10,40 14,70 1,20 ¹/” CTP 0,522
217 10,70 16,00 1,50 M10 0,505
310 10,70 17,00 1,50 0,522
218 10,70 18,00 1,50 0,516
8 11,26 18,36 2,00 M10 0,603
219 11,40 16,30 1,50 0,505
9 11,69 19,05 2,00 M11 0,608
312 11,80 18,10 1,50 0,532
220 11,80 18,50 1,50 0,539
221 11,80 19,10 1,50 0,539
222 12,70 18,00 1,50 0,608
313 12,70 19,00 1,50 0,538
223 12,70 20,00 1,50 M12 0,548
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
224 13,70 20,00 1,50 0,548
225 13,70 22,00 1,50 0,564
21 13,74 20,57 2,00 M12-¼” 0,626
315 13,80 20,10 1,50 0,548
511 13,85 18,70 1,20 ¼” CTP 0,574
226 14,00 18,70 1,50 0,539
316 14,70 21,00 1,50 0,558
227 14,70 22,00 1,50 M14 0,645
10 14,86 22,23 2,00 M14 0,649
22 15,83 22,23 2,00 0,649
228 16,00 22,70 1,50 0,564
11 16,51 25,40 2,00 M16 0,711
317 16,70 23,00 1,50 0,574
229 16,70 24,00 1,50 M16 0,608
319 17,20 23,90 2,00 0,698
23 17,28 23,80 2,00 ³/” 0,698
512 17,35 22,70 1,20 ³/” CTP 0,603
230 17,40 24,00 1,50 0,603
231 18,00 24,70 1,50 0,608
12 18,16 25,40 2,30 M18 0,783
232 18,70 26,00 1,50 M18 0,724
320 18,70 27,00 2,00 0,749
24 19,69 26,92 2,30 0,828
233 20,70 28,00 1,50 M20 0,662
321 20,70 29,00 2,00 0,774
234 21,50 28,70 2,50 0,807
25 21,54 28,58 2,50 M20-½” 0,851
513 21,65 26,70 1,20 ½” CTP 0,676
235 22,50 28,00 1,50 0,662
236 22,70 30,00 2,00 M22 0,906
237 22,70 30,00 3,00 1,097
324 22,70 31,00 2,00 0,840
26 23,49 31,75 2,30 M22-/” 0,919
325 23,70 32,00 2,00 0,851
13 24,26 33,27 2,30 M24 0,884
238 24,70 32,00 2,00 M24 0,851
326 24,70 33,00 2,00 0,868
239 26,70 35,00 2,00 M26 0,884
327 27,00 35,30 2,00 0,906
27 27,05 34,93 2,30 M26-³/” 1,004
240 27,20 36,00 2,00 0,893
514 27,30 32,50 1,20 ³/” CTP 0,860
520 27,30 32,60 2,00 0,896
328 27,70 36,00 2,00 0,902
28 27,82 38,61 2,30 M27 1,072
TipoType
Dimensioni Dimensions (mm)Note €Diametro Diameter Altezza
WidhtInternoInternal
EsternoExternal
329 28,60 36,00 2,00 0,902
241 28,70 37,00 2,00 0,919
330 29,20 37,50 2,00 0,927
14 29,33 36,58 2,30 1,021
331 30,70 39,00 3,00 M30 0,961
29 30,81 38,10 2,30 M30-/” 1,055
242 31,00 39,00 2,00 0,979
15 32,64 41,40 3,20 1,447
243 33,70 42,00 2,00 M33 1,115
31 33,89 42,80 2,30 M33-1” 1,285
30 33,89 42,80 3,20 M33-1” 1,599
515 34,20 39,50 2,00 1” CTP 0,970
244 34,30 43,00 2,00 1,140
16 35,94 44,45 3,20 M36 1,668
245 36,70 46,00 2,00 M36 1,200
333 37,00 48,00 2,50 1,455
17 38,96 47,75 3,20 M38 1,634
246 40,00 51,00 2,50 1,541
247 42,70 53,00 3,00 M42 1,927
516 42,80 49,50 2,00 1 ¼”CTP 1,940
32 42,93 52,38 3,20 M42-1 ¼” 2,051
335 43,00 54,00 2,50 1,902
18 45,34 57,15 3,20 M45 2,259
336 46,00 57,00 2,50 1,902
33 48,44 58,60 3,20 1 ½” 2,242
517 48,70 55,50 2,00 1 ½”CTP 1,723
248 48,70 59,00 3,00 M48 2,183
337 49,00 60,00 2,50 1,986
19 51,69 63,50 3,20 2,349
249 52,00 60,00 3,00 2,230
250 53,30 64,50 3,00 2,268
34 54,89 69,85 3,20 M52-1 ³/” 2,783
35 58,04 70,36 3,20 *
518 60,50 68,50 2,00 2”CTP 2,361
36 60,58 73,03 3,20 2” 2,907
251 60,70 73,00 3,00 2,817
37 64,39 77,22 3,20 *
38 66,68 79,50 3,20 2 ¼” 3,327
252 68,60 79,50 3,50 3,502
39 76,08 90,17 3,20 2 ½” 4,910
253 76,08 90,30 3,38 4,136
254 89,09 101,48 3,20 5,722
255 127,00 143,67 5,00 *
* Disponibile su richiesta Available on request
27
Pistoni pneumatici completi con canali di ventilazione PKCComplete pneumatic pistons with ventilation grooves PKC
TipoType
Dimensioni - Dimensions (mm)€
D d d1 d2 H1 H2 H3
PKC 25x 8 25 8 15,5 20 12 6 4 3,78
PKC 32x 8 32 8 14 24,5 15 6 4 4,73
PKC 40x10 40 10 20 32 18 7 5 5,38
PKC 50x10 50 10 20 42 18 7 5 6,11
PKC 54x30 54 30 40,5 46 18 6 4 *
PKC 60x12 60 12 39 51 22 9 5 7,86
PKC 63x16 63 16 43 54 22 9 6 8,37
PKC 63x14 63 14 32 54 22 9 6 *
PKC 70x12 70 12 49 60 25 9 6 11,86
PKC 75x12 75 12 55 61 25 9 6 12,95
PKC 80x14 80 14 32 70 25 9 6 14,19
PKC 80x16 80 16 55 70 25 9 6 *
PKC 85x12 85 12 60 75 25 12 7 15,94
PKC 90x12 90 12 64 82 24 10 7 16,81
PKC 95x12 95 12 69 87 25 10 7 18,12
PKC 100x18 100 18 45 90 25 12 9 19,72
PKC 100x20 100 20 45 90 25 12 9 *
PKC 125x18 125 18 45 114 30 12 9 *
PKC 160x24 160 24 55 149 30 14 11 *
PKC 200x24 200 24 55 190 30 14 11 *
* Disponibile su richiesta Available on request
28
IntroduzioneLe forniture dei prodotti, presenti in questo documento, sono regolate dalle seguenti condizioni generali di vendita. Sarà necessario un preventivo accordo scritto con il Fornitore per ulteriori ed eventuali clausole e/o condizioni particolari richieste dai Clienti. Sono da ritenersi inaccettabili, tutte le clausole e/o condizioni contrattuali in contrasto con quanto sotto riportato.
1) Off erte ed ordiniLe off erte mantengono una validità di 30 giorni dalla data di comunicazione al Cliente. Decorso questo termine senza avere ricevuto l’ordine, il Fornitore avrà la facoltà di accettare o non accettare l’ordinazione tardiva. Tutti gli ordini dovranno indicare sempre la tipologia del prodotto, la quantità e la data di consegna richiesta. Il Fornitore si riserva il diritto di fornire eventualmente altri prodotti aventi le stesse caratteristiche merceologiche di quelli ordinati.Gli ordini sono da intendersi impegnativi per il Cliente, anche senza la forma scritta. Il Fornitore avrà il medesimo obbligo al momento dell’invio della conferma d’ordine (escluse le eccezioni ai punti due e cinque).
2) PrezziI prezzi validi di riferimento sono quelli indicati nell’off erta e/o nell’accettazione dell’ordine e sono riferiti solo a prodotti standard. I prezzi relativi a tipologie speciali di prodotto e/o non standard ovvero a richiesta specifi ca del Cliente, saranno concordati per ogni singolo ordine di volta in volta tra le parti. Il Fornitore si riserva il diritto, per esigenze produttive e/o d’approvvigionamento, di fornire una quantità di prodotto con variazione pari a ± 15% rispetto alla quantità concordata con il Cliente. Nel corso delle diverse forniture qualora dovessero verifi carsi degli aumenti causati da variazioni quali: aumento delle materie prime, del costo della mano d’opera, del costo dei trasporti, delle imposte e dazi, ed anche altri aumenti che comportino aumenti del prodotto per il Fornitore, questo potrà a proprio insindacabile giudizio adeguare i prezzi, comunicando l’entità di tale aumento al Cliente. Le quotazioni dei prodotti, sono da intendersi franco sede del Fornitore, escluso imballo ed IVA.
3) Consegna La consegna, è da intendersi terminata ed eseguita nel momento in cui i prodotti sono messi a disposizione del Cliente al banco, presso la sede del Fornitore o con la consegna al vettore/spedizioniere. Se il Cliente non ha dato precise istruzioni sulle modalità di spedizione dei prodotti o non ha provveduto in modo celere al loro ritiro, il Fornitore potrà conservarli presso i propri locali; a rischio e pericolo ed a spese del Cliente, senza alcuna responsabilità per la loro conservazione o spedirli con mezzi propri o corrieri di propria scelta.
4) Termini di consegnaI termini di consegna indicati dal Fornitore, sono indicativi e non hanno carattere essenziale e perentorio. La loro inosservanza non costituirà in alcun caso motivo di risoluzione del contratto e/o risarcimento d’alcun danno di qualsiasi natura. I termini saranno rispettati per quanto possibile, poiché la consegna dipende da soggetti terzi rispetto al Fornitore.Il Fornitore potrà risolvere il contratto e/o modifi care i termini di consegna, senza che ciò possa costituire in alcun modo motivo di risarcimento e/o pagamento d’indennità per eventuali danni subiti dai Clienti, nei seguenti casi: I. Inadempienza dei pagamenti e/o pendenze debitorie da parte
del Cliente. II. Diffi coltà in fase d’approvvigionamento dei prodotti.III. Modifi che alle condizioni contrattuali dopo il ricevimento
dell’ordine.IV. Eventi di causa e/o forza maggiore, non imputabili alla volontà
del Fornitore, quali a titolo di esempio scioperi di vario genere,
IntroductionThe supply of the products covered by this document is governed by the following general conditions of sale. Any additional clauses and/or special conditions requested by Customers shall only be valid in case of prior written agreement with the Supplier. All contract clauses and/or conditions in conflict with the terms set out below shall be considered unacceptable.
1) Off ers and orders Offers are valid for 30 days from the date of communication to the Customer. If no order is received within this period, the Supplier shall have the option of accepting or rejecting late orders, at its own discretion. All orders must always state the type of product, the quantity and the delivery date required. The Supplier reserves the right to supply different products with the same characteristics as those ordered.Orders are binding on the Customer even if not in writing. Orders shall also be binding on the Supplier once the confirmation of order has been dispatched (with the exceptions in points two and five below).
2) PricesThe valid reference prices are those stated in the offer and/or the order acceptance, and refer to standard products only. The prices relating to special and/or non-standard product types, or to specific requests from the Customer, shall be agreed between the parties for each order on a one-off basis. Depending on production and/or procurement requirements, the Supplier reserves the right to supply a quantity of product with variation of +/-15% from the quantity agreed with the Customer. Over a series of shipments, if increases occur due to variations such as increases in raw material costs, in the cost of labour, freight costs, taxes and duties, or any other increases which lead to increases in the cost of the product for the Supplier, the latter may adjust the prices accordingly, at its own absolute discretion, informing the Customer of the amount of any such increase. Quotations for products are ex-works Supplier’s factory, not including packaging or VAT.
3) DeliveryDelivery is considered to have taken place when the products are placed on the Customer’s disposal on the counter on the Supplier’s premises, or on consignment to the carrier/forwarding agent. If the Customer has not given clear instructions concerning the procedures for shipment of the products, or has not arranged for their prompt collection, the Supplier may store them on its own premises, at the Customer’s risk and expense, without any responsibility for their conservation, or may ship them using its own vehicles or carriers of its choice.
4) Delivery termsThe delivery terms stated by the Supplier are guideline and not binding. In no case shall failure to meet them constitute grounds for termination of the contract and/or for compensation for any damage of any kind. Delivery terms shall be complied with as far as possible, since delivery depends on third parties over which the Supplier has no control.The Supplier may terminate the contract and/or modify the delivery terms, without this constituting grounds for compensation and/or payment of damages for any costs or losses incurred by the Customer, in the following cases: I. Failure to meet payment terms and/or outstanding debts on the
part of the Customer. II. Diffi culty in procurement of the products.III. Modifi cations of the contract conditions after receipt of the order.
IV. Circumstances of force majeure, beyond the Supplier’s control, such as, for example, strikes of various kinds, natural disasters,
Condizioni Generali di VenditaGeneral Sales Conditions
29
calamità naturali, epidemie, sommosse, tumulti, guerre, blocchi doganali che possono gravare sul Fornitore stesso o sulle sue fonti d’approvvigionamento.
V. Inesattezze o ritardi da parte del Cliente nella conferma dell’ordine.
Per i fatti riportati ai punti I-III-V il Fornitore potrà chiedere il risarcimento dei danni al Cliente.
5) SpedizioniLe spedizioni sono sempre eseguite per conto dei Clienti, pertanto a loro rischio e pericolo, anche nei casi di trasporti “franco destino”. Nel caso d’eventuali manomissioni o ammanchi imputabili espressamente al vettore/spedizioniere, sarà obbligo del Cliente stesso di presentare reclamo direttamente al vettore/spedizioniere. Il Fornitore, potrà accettare reclami per eventuali diff erenze, qualitative e quantitative dei prodotti, solamente se comunicate da parte del Cliente, in forma scritta entro otto giorni dalla data di ricevimento dei prodotti, a pena di decadenza da ogni e qualsiasi reclamo. In mancanza d’istruzioni dettagliate da parte del Cliente, il Fornitore non sarà responsabile, sia per la scelta dei mezzi di trasporto, sia per le tariff e applicate dai vettori/spedizionieri. Inoltre qualora non sussista accordo tra le parti, le spese di spedizione sono da intendersi a cura ed a carico del Cliente. Nei casi in cui anche solo una parte delle spese di trasporto sia a carico del Fornitore, quest’ultimo potrà servirsi dei mezzi più economici a propria insindacabile scelta. Gli ulteriori aggravi e oneri aggiuntivi nei costi di trasporto saranno ad esclusivo carico del Cliente. Per errori di consegna causati dal Cliente, con conseguente reso dei prodotti, il Fornitore avrà il diritto di addebitare al Cliente le spese di spedizione se dovute, ed il 15% del prezzo dei prodotti. 6) Pagamenti Il Cliente non potrà sospendere ovvero ritardare i pagamenti della merce per nessun motivo e dovranno essere eseguiti al domicilio del Fornitore, come indicato nei documenti che accompagnano la spedizione dei prodotti. Non saranno considerati validi pagamenti eff ettuati in luoghi diversi, salvo che non siano stati concordati preventivamente con il Fornitore. Decorsi i termini indicati, il Fornitore avrà diritto al pagamento, oltre alla somma capitale dovuta per il prezzo della merce, anche agli interessi di mora pari all’Euribor aumentato del 3%, avvalendosi del diritto d’agire anche giudizialmente nei confronti del Cliente moroso. Il Fornitore ha la facoltà di sospendere temporaneamente la fabbricazione o la fornitura dei prodotti ancora in ordine; inoltre potrà annullare il residuo dell’ordine stesso, comunicandolo al Cliente, che non avrà diritto ad indennizzi d’alcun genere. Il Fornitore avrà il diritto di ottenere il pagamento delle somme dovutegli per le consegne già eseguite. Per ogni contestazione inerente a prodotti in corso di fabbricazione, pronti per essere spediti o già in possesso del Cliente, quest’ultimo non è liberato dai propri obblighi e dovrà provvedere al pagamento, alla data stabilita, di quanto dovuto al Fornitore.
7) GaranziaLa garanzia s’estende per un anno dalla data di consegna dei prodotti; è limitata esclusivamente alla riparazione o alla sostituzione gratuita dei pezzi riconosciuti non conformi rispetto alle specifi che riportate sui cataloghi tecnici. La responsabilità della garanzia del Fornitore decade per tutti i prodotti che hanno subito manomissioni, sovraccarichi d’esercizio, lubrifi cazioni, riparazioni errate o errori in fase di montaggio, quindi per problemi causati da un utilizzo improprio del Cliente e pertanto non più restituibili al Fornitore.Il Cliente inoltre è tenuto ad avvertire il Fornitore per eventuali difetti, vizi o non conformità dei prodotti entro otto giorni dal ricevimento degli stessi (in forma scritta), pena la decadenza della garanzia. Non saranno accettati reclami trascorsi i termini sopra citati. I reclami non possono causare l’’annullamento o la riduzione degli
epidemics, uprisings, riots, wars or customs blockades which may affect the Supplier itself or its sources of supply.
V. Inaccuracies or delays on the part of the Customer in confi rming the order.
In the circumstances listed in points I-III-V, the Supplier may request compensation from the Customer.
5) ShipmentsShipments are always made on the Customer’s behalf and therefore at its risk, even in case of delivery “freight prepaid”. In case of tampering or missing items for which the carrier/forwarding agent is specifi cally to blame, the Customer shall be responsible for placing a claim directly with the carrier/forwarding agent. The Supplier will only be able to accept claims for any diff erences in the quality or quantity of the products if submitted by the Customer, in writing within eight days after the date of receipt of the products; otherwise, all claims shall become null and void. In the absence of detailed instructions from the Customer, the Supplier shall not be responsible for the choice of means of transport or for the rates charged by the carriers/forwarding agents. Moreover, in the absence of agreement between the parties, the shipment expenses shall be payable by the Customer. If even just a part of the freight costs is to be met by the Supplier, the latter shall be permitted to make use of the most economical means of transport, at its own absolute discretion. Any additional freight costs and/or charges shall be solely for the Customer’s account. For errors in delivery caused by the Customer which result in return of the products, the Supplier shall be entitled to charge the Customer the shipment expenses, if due, plus 15% of the price of the products.
6) PaymentThe Customer shall not be permitted to suspend or delay payments for goods for any reason, and payments must be made to the Supplier’s domicile, as stated in the documents which accompany the shipment of the products. Payments made to other places shall not be considered valid unless agreed in advance with the Supplier. Once the specified payment terms have passed, the Supplier shall be entitled to payment, not only of the capital sum due for the price of the goods, but also of interest at the Euribor rate increased by 3%, and retains the right to take legal action against any Customer late with payments. The Supplier shall be entitled to temporarily suspend the manufacture or supply of any products still on order; it may also cancel the remainder of the order, informing the Customer, which shall not be entitled to compensation of any kind. The Supplier shall be entitled to obtain payment of the sums due to it for the deliveries already made. In case of any disputes concerning products being manufactured, ready for shipment or already in the Customer’s possession, the latter shall not be released from its obligations and must pay the amounts due to the Supplier at the date set.
7) WarrantyThe warranty is valid for one year from the date of delivery of the products; it is limited solely to the repair or replacement, free of charge, of pieces acknowledged not to comply with the specifi cations stated in the technical catalogues. The Supplier’s warranty ceases to apply to all products which have been tampered with, operated with overloads, improperly lubricated or repaired, or incorrectly assembled; in other words, for all problems caused by improper use by the Customer, for which the Supplier is not responsible.The Customer is also obliged to inform the Supplier about any defects, faults or non-conformity of the products within eight days after the date of receipt of the same (in writing); otherwise, the warranty shall become null and void. No claims shall be accepted once the above terms have expired.
Condizioni Generali di VenditaGeneral Sales Conditions
30
ordini da parte del Cliente, né la corresponsione d’indennizzi e/o risarcimenti da parte del Fornitore. Non si accettano ritorni di prodotti, se non preventivamente autorizzati. Non si accettano ritorni di forniture, per prodotti resi non integri o manomessi o espressamente costruiti, lavorati e/o modifi cati per il Cliente. Il materiale non conforme dovrà essere reso previa autorizzazione del Fornitore, esente da ogni spesa (franco destino). Sul documento di reso dovranno essere riportati gli estremi del DDT o fattura di vendita relativa (Data e n° - obbligatorio per legge). Il Fornitore non assume alcuna responsabilità per incidenti che possano avvenire nell’utilizzo dei propri prodotti.
8) Prodotti speciali e/o a disegnoIl Fornitore qualora accetti commesse di prodotti speciali o su particolari specifiche tecniche del Cliente, dovrà sempre ricevere un disegno tecnico dettagliato prima di procedere alla produzione. Dopo aver accettato l’ordine e previa consegna del disegno tecnico, il Fornitore invierà al Cliente una campionatura del prodotto. Il Cliente, dopo averne preso visione, dovrà inviare conferma scritta al Fornitore per l’esecuzione dell’intera fornitura. Nel caso in cui il Cliente per motivi non imputabili al Fornitore rifiutasse in modo parziale o completo la fornitura, il Fornitore potrà avvalersi del diritto di addebitare le spese per l’esecuzione della campionatura, oltre al mancato guadagno e per gli eventuali danni subiti, trattandosi di prodotti non commercializzabili. Il Fornitore provvederà al ritiro ed alla sostituzione del materiale non conforme, nel caso in cui il Cliente dimostrasse palesemente che le caratteristiche del prodotto fornito non corrispondono a quelle dei campioni consegnati, senza alcuna responsabilità da parte del Fornitore e con rinuncia del Cliente ad ogni richiesta di risarcimento a qualsiasi titolo richiesto.
9) Validità e deroghe delle Condizioni Generali di VenditaOgni e qualsiasi deroga o modifi ca alle sopra indicate condizioni generali di vendita, dovrà essere convenuta in forma scritta tra le parti.
10) Domicilio del ClienteIl domicilio del Cliente è da intendersi quello ove il Cliente ha la propria sede legale, salvo diversa comunicazione scritta. Il Fornitore pertanto indirizzerà tutte le comunicazioni e le spedizioni dei prodotti in quella sede.
11) Foro competentePer ogni e qualsiasi controversia sarà competente il foro dove si trova la sede legale del Fornitore.
Claims shall not constitute grounds for the cancellation or reduction of orders on the part of the Customer, or the payment of damages and/or compensation on the part of the Supplier. No returns of products are accepted unless authorised in advance. No returns are accepted of products which are not intact, have been tampered with, or have been specifi cally built, processed and/or modifi ed for the Customer. Non-conforming material must be returned, further to the Supplier’s authorisation, with all expenses paid (freight prepaid). The return document must contain the details of the original transport document or invoice (date and number - compulsory by law). The Supplier does not accept any responsibility for accidents occurring during the use of its products.
8) Special and/or custom-made productsIf the Supplier accepts orders for special products or those made to the Customer’s own technical specifications, it must always receive a detailed technical drawing before proceeding with production. After accepting the order and further to consignment of the technical drawing, the Supplier shall send the Customer a sample lot of the product. After viewing the sample lot, the Customer shall send the Supplier written confirmation for production of the entire ordered amount. If, due to circumstances beyond the Supplier’s control, the Customer refuses delivery of all or part of the goods, the Supplier shall be entitled to reimbursement of the expenses for production of the sample lot, and for compensation for loss of earnings and for any damages incurred, since these products are not marketable. The Supplier shall collect and replace non-conforming material if the Customer clearly demonstrates that the characteristics of the product supplied differ from those of the samples consigned, without any liability on the part of the Supplier and with waiver on the part of the Customer of any request for compensation on any grounds. 9) Validity and waivers of the General Conditions of SaleAny waivers or modifi cations of the aforesaid general conditions of sale must be agreed between the parties in writing.
10) Customer’s DomicileThe Customer shall be domiciled in the place where it has its registered offi ce, unless otherwise notifi ed in writing. The Supplier shall therefore send all communications and shipments of products to the relevant address.
11) Legal jurisdictionThe law court of the Supplier’s registered offi ce shall have jurisdiction over all disputes of any kind.
Condizioni Generali di VenditaGeneral Sales Conditions
©Copyright
È vietata la riproduzione anche parziale del contenuto di questo Catalogo Tecnico.Non si possono accettare responsabilità per eventuali errori od omissioni. Le misure non sono impegnative.
The reproduction, even partial, of the contained concerning this Technical Catalogue, is forbidden. Liability for possible errors and/or omissions are not accepted. Sizes are not binding.
O TTO
TTO TTO T
TO
TTO T
TO TTO T
TO
O TTO T
TO TTO T
TO TTO
TTO TTO T
TO TTO T
TO TTO T
TO
TTO T
TO TTO T
TO TTO T
TO TT
TO TTO T
TO TTO T
TO TTO T
TO T
TO TTO T
TO TTO T
TO TTO
TO TTO T
TO TTO T
T
TO TTO T
TOT
TO TTO
T
1.1.10 ©Copyright
79800501