Upflow/Horizontal LeftDownflow/Horizontal RightCondensing, Direct VentGas-Fired FurnaceFREEDOM 90 SINGLE STAGEAUX1B040A9241A, AUX1B060A9241A,AUX1B060A9361A, AUX1B080A9241A,AUX1B080A9421A, AUX1C080A9601A,AUX1C100A9361A, AUX1C100A9481A,AUX1D100A9601A, AUX1D120A9601AADX1B040A9241A, ADX1B060A9361A,ADX1B080A9421A, ADX1C100A9481A,ADX1D120A9601A
Single-Stage Fan AssistedCombustion System
PUB. NO. 12-1234-06
© 2009 American Standard Heating & Air Conditioning 2 22-1234-05
GeneralFeatures
NATURAL GAS MODELSCentral Heating furnace designs arecertified by the American Gas Associationfor both natural and L.P. gas. Limitsetting and rating data were establishedand approved under standard ratingconditions using American NationalStandards Institute standards.
SAFE OPERATIONThe Integrated System Control has solidstate devices, which continuously monitorfor presence of flame, when the system isin the heating mode of operation. Dualsolenoid combination gas valve andregulator provide extra safety.
QUICK HEATINGDurable, cycle tested, heavy gaugealuminized steel heat exchangerquickly transfers heat to provide warmconditioned air to the structure. Lowenergy power vent blower, to increaseefficiency and provide a positive dis-charge of gas fumes to the outside.
BURNERSMultiport Inshot burners will give years ofquiet and efficient service. All modelscan be converted to L.P. gas withoutchanging burners.
INTEGRATED SYSTEM CONTROLExclusively designed operational pro-gram provides total control of furnacelimit sensors, blowers, gas valve, flamecontrol and includes self diagnostics forease of service. Also contains connec-tion points for E.A.C./humidifier.
AIR DELIVERYThe four speed, direct drive blowermotor, has sufficient airflow for mostheating and cooling requirements, willswitch from heating to cooling speeds ondemand from room thermostat. Theblower door safety switch will prevent orterminate furnace operation when theblower door is removed.
STYLINGHeavy gauge steel and “wrap-around”cabinet construction is used in thecabinet with baked-on enamel finish forstrength and beauty. The heat ex-changer section of the cabinet is com-pletely lined with foil faced fiberglassinsulation. This results in quiet andefficient operation due to the excellentacoustical and insulating qualities offiberglass. Built-in bottom pan andalternate bottom, left or right side returnair connection provision.
FEATURES ANDGENERAL OPERATIONThe FREEDOM 90 Single Stage HighEfficiency Gas Furnaces employ aSilicon Nitride Hot Surface Ignitionsystem, which eliminates the waste of aconstant burning pilot. The integratedsystem control lights the main burnersupon a demand for heat from the roomthermostat. Complete front serviceaccess.
a. Low energy power venter
b. Vent proving pressure switch.
22-1234-05 3
Contents
General Features 2
Features and Benefits 3FREEDOM 90 Standard Equipment 3FREEDOM 90 Optional Equipment 4
General Data 5AUX1B040A9241A 5AUX1B060A9241A 5AUX1B060A9361A 5AUX1B080A9241A 5AUX1B080A9421A 5AUX1C080A9601A 5AUX1C100A9361A 5AUX1C100A9481A 6AUX1D100A9601A 6AUX1D120A9601A 6ADX1B040A9241A 7ADX1B060A9361A 7ADX1B080A9421A 7ADX1C100A9481A 8ADX1D120A9601A 8
Performance Data 9
Electrical Data 11
Field Wiring 13
Twinning Field Wiring 14
Dimensions 15
Featuresand Benefits
FREEDOM 90Standard Equipment
• Power supply 115/1/60
• Convertible to horizontal left
• Type 29-4C™ stainless steel second-ary heat exchanger
• Inner blower doors
• Direct drive, 4-speed motors
• Silicon Nitride igniter with adaptiveheat up
• Accessory hook-up capability –Hum and EAC
• Quiet induced draft blower
• Blower door safety switch
• Dual solenoid combination gas valve& regulator
• PVC venting – 1 or 2 pipe vent option
• Left/right gas connection
• Selectable cooling fan off delayeliminates need for BAY24X045 timedelay relay
• Single wire twinning
• Integrated solid state control with self-diagnostics
• 24 volt fuse
• Manual reset burner box limit
• Optional extended warranties
4 12-1234-06
Features andBenefits
FREEDOM 90 Single Stage Optional EquipmentComfort Control, XL803, Programmable 7 Day, 3-Ht, 2-Cl ........................................................................... TCONT803AS32DA [ ]Comfort Control, XR402, Electric, 3-Ht, 2-Cl (Non-programmable) .............................................................. TCONT402AN32DA [ ]For additional comfort control choices, see the product catalog or quick select handbookPropane Conversion Kit ....................................................................................................................................... BAYLPKT210B [ ]Propane Conversion Kit (stainless steel burners) ................................................................................................ BAYLPSS210B [ ]Wall Mount Flange – 3" ............................................................................................................................................. BAY96X147 [ ]Wall Mount Flange – 2" ............................................................................................................................................. BAY96X148 [ ]Downflow Subbase ................................................................................................................................................ BAYBASE205 [ ]Filter Access Door Kit .............................................................................................................................................. BAYFLTR206 [ ]Side Filter Rack ....................................................................................................................................................... BAYFLTR200 [ ]High Altitude Pressure Switch Kit TUX040,100C960D; TDX040C .......................................................................... BAYHALT230 [ ]High Altitude Pressure Switch Kit TUX060C ........................................................................................................... BAYHALT231 [ ]High Altitude Pressure Switch Kit TUX080C ........................................................................................................... BAYHALT232 [ ]High Altitude Pressure Switch Kit TUX100C948D,120C; TDX080,120C ................................................................. BAYHALT233 [ ]High Altitude Pressure Switch Kit TDX100C ........................................................................................................... BAYHALT234 [ ]High Altitude Pressure Switch Kit TDX060C ........................................................................................................... BAYHALT241 [ ]Concentric Vent Kit .............................................................................................................................................. BAYVENT100A [ ]Sidewall Vent Termination Kit .............................................................................................................................. BAYVENT200B [ ]Manufactured/Mobile Home Kit ...........................................................................................................................BAYMFGH100A [ ]
12-1234-06 5
Product Specifications 1MODEL
TYPE
RATINGS 2Input BTUHCapacity BTUH (ICS) 3AFUE (ICS)Temp. rise (Min.-Max.) °F.
BLOWER DRIVEDiameter - Width (In.)No. UsedSpeeds (No.)CFM vs. in. w.g.Motor HPR.P.M.Volts / Ph / Hz
COMBUSTION FAN - TypeDrive - No. SpeedsMotor HP - RPMVolts / Ph / HzFLA
FILTER — Furnished?Type RecommendedHi Vel. (No.-Size-Thk.)
VENT PIPE DIA. — Min (In.) 56
HEAT EXCHANGERType-Fired
-UnfiredGauge (Fired)
ORIFICES — MainNat. Gas. Qty. — Drill SizeL.P. Gas Qty. — Drill Size
GAS VALVE
PILOT SAFETY DEVICEType
BURNERS — TypeNumber
POWER CONN. — V / Ph / Hz 4Ampacity (In Amps)Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DIMENSIONSCrated (In.)
WEIGHTShipping (Lbs.) / Net (Lbs)
GeneralData
AUX1B040A9241A
Upflow / Horizontal
40,00038,00095.0
30 - 60
DIRECT9 x 7
14
See Fan Performance Table1/5
1075115/1/60
CentrifugalDirect - 1
1/55 - 3000115/1/60
1.0
NoHigh Velocity
1 - 17x25 - 1in.
2 Round
Aluminized Steel - Type I
20
2 — 452 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot2
115/1/604.815
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
139 / 129
AUX1B060A9361A
Upflow / Horizontal
60,00056,00092.1
30 - 60
DIRECT10 x 7
14
See Fan Performance Table1/3
1075115/1/60
CentrifugalDirect - 1
1/55 - 3000115/1/60
1.0
NoHigh Velocity
1 - 17x25 - 1in.
2 Round
Aluminized Steel - Type I
20
3 — 453 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot3
115/1/608.415
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
150 / 140
AUX1B060A9241A
Upflow / Horizontal
60,00056,00092.1
30 - 60
DIRECT9 x 7
14
See Fan Performance Table1/3
1075115/1/60
CentrifugalDirect - 1
1/55 - 3000115/1/60
1.0
NoHigh Velocity
1 - 17x25 - 1in.
2 Round
Aluminized Steel - Type I
20
3 — 453 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot3
115/1/609.215
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
150 / 140
AUX1B080A9241A
Upflow / Horizontal
80,00074,00092.1
35 - 65
DIRECT10 x 7
14
See Fan Performance Table1/3
1075115/1/60
CentrifugalDirect - 1
1/24 - 3200115/1/60
1.35
NoHigh Velocity
1 - 17x25 - 1in.
2 Round
Aluminized Steel - Type I
20
4 — 454 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot4
115/1/609.515
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
158 / 148
Notes1 Central Furnace heating designs are certified by AGA and ETL.2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea
level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500feet above sea level.
3 Based on U.S. government standard tests.4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.5 Refer to the Vent Length Table in the Installer's Guide or the Allowable Vent Length label located on the furnace.6 All *UX1 and *DX1 furnace models have a vent outlet diameter that equals 2".
6 12-1234-06
Product Specifications 1MODEL
TYPE
RATINGS 2Input BTUHCapacity BTUH (ICS) 3AFUE (ICS)Temp. rise (Min.-Max.) °F.
BLOWER DRIVEDiameter - Width (In.)No. UsedSpeeds (No.)CFM vs. in. w.g.Motor HPR.P.M.Volts / Ph / Hz
COMBUSTION FAN - TypeDrive - No. SpeedsMotor HP - RPMVolts / Ph / HzFLA
FILTER — Furnished?Type RecommendedHi Vel. (No.-Size-Thk.)
VENT PIPE DIAMETER — Min (In.) 56
HEAT EXCHANGERType-Fired
-UnfiredGauge (Fired)
ORIFICES — MainNat. Gas. Qty. — Drill SizeL.P. Gas Qty. — Drill Size
GAS VALVE
PILOT SAFETY DEVICEType
BURNERS — TypeNumber
POWER CONN. — V / Ph / Hz 4Ampacity (In Amps)Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DIMENSIONSCrated (In.)
WEIGHTShipping (Lbs.) / Net (Lbs)
AUX1B080A9421A
Upflow / Horizontal
80,00074,00092.1
35 - 65
DIRECT10 x 8
14
See Fan Performance Table1/3
1075115/1/60
CentrifugalDirect - 1
1/24 - 3200115/1/60
1.35
NoHigh Velocity
1 - 17x25 - 1in.
2 Round
Aluminized Steel - Type I
20
4 — 454 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot4
115/1/609.515
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
158 / 148
AUX1C080A9601A
Upflow / Horizontal
80,00074,00092.1
30 - 60
DIRECT10 x 11
14
See Fan Performance Table3/4
1075115/1/60
CentrifugalDirect - 1
1/25 - 3200115/1/60
1.35
NoHigh Velocity
1 - 20x25 - 1in.
2.5 Round
Aluminized Steel - Type I
20
4 — 454 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot4
115/1/6013.520
1/2
H x W x D41-3/4 x 23 x 30-1/2
171 / 160
AUX1C100A9361A
Upflow / Horizontal
100,00093,00092.1
35 - 65
DIRECT10 x 10
14
See Fan Performance Table1/2
1075115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
1.75
NoHigh Velocity
1 - 20x25 - 1in.
2.5 Round
Aluminized Steel - Type I
20
5 — 455 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot5
115/1/6011.815
1/2
H x W x D41-3/4 x 23 x 30-1/2
171 / 160
Notes1 Central Furnace heating designs are certified by AGA and ETL.2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea
level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500feet above sea level.
3 Based on U.S. government standard tests.4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.5 Refer to the Vent Length Table in the Installer's Guide or the Allowable Vent Length label located on the furnace.6 All *UX1 and *DX1 furnace models have a vent outlet diameter that equals 2".
12-1234-06 7
GeneralData
Product Specifications 1MODEL
TYPE
RATINGS 2Input BTUHCapacity BTUH (ICS) 3AFUE (ICS)Temp. rise (Min.-Max.) °F.
BLOWER DRIVEDiameter - Width (In.)No. UsedSpeeds (No.)CFM vs. in. w.g.Motor HPR.P.M.Volts / Ph / Hz
COMBUSTION FAN - TypeDrive - No. SpeedsMotor HP - RPMVolts / Ph / HzFLA
FILTER — Furnished?Type RecommendedHi Vel. (No.-Size-Thk.)
VENT PIPE DIAMETER — Min (In.) 56
HEAT EXCHANGERType-Fired
-UnfiredGauge (Fired)
ORIFICES — MainNat. Gas. Qty. — Drill SizeL.P. Gas Qty. — Drill Size
GAS VALVE
PILOT SAFETY DEVICEType
BURNERS — TypeNumber
POWER CONN. — V / Ph / Hz 4Ampacity (In Amps)Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DIMENSIONSCrated (In.)
WEIGHTShipping (Lbs.) / Net (Lbs)
AUX1C100A9481A
Upflow / Horizontal
100,00093,00092.1
35 - 65
DIRECT10 x 10
14
See Fan Performance Table1/2
1075115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
1.75
NoHigh Velocity
1 - 20x25 - 1in.
2.5 Round
Aluminized Steel - Type I
20
5 — 455 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot5
115/1/6013.620
1/2
H x W x D41-3/4 x 23 x 30-1/2
171 / 160
AUX1D120A9601A
Upflow / Horizontal
120,000113,000
92.140 - 70
DIRECT11 x 10
14
See Fan Performance Table3/4
1100115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
0.71
NoHigh Velocity
1 - 24x25 - 1in.
3 Round
Aluminized Steel - Type I
20
6 — 456 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot6
115/1/6012.920
1/2
H x W x D41-3/4 x 26-1/2 x 30-1/2
205 / 193
AUX1D100A9601A
Upflow / Horizontal
100,00093,00092.1
35 - 65
DIRECT11 x 10
14
See Fan Performance Table3/4
1100115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
0.71
NoHigh Velocity
1 - 24x25 - 1in.
2.5 Round
Aluminized Steel - Type I
20
5 — 455 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot5
115/1/6012.920
1/2
H x W x D41-3/4 x 26-1/2 x 30-1/2
197 / 185
Notes1 Central Furnace heating designs are certified by AGA and ETL.2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea
level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500feet above sea level.
3 Based on U.S. government standard tests.4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.5 Refer to the Vent Length Table in the Installer's Guide or the Allowable Vent Length label located on the furnace.6 All *UX1 and *DX1 furnace models have a vent outlet diameter that equals 2".
8 12-1234-06
GeneralData
Product Specifications 1MODEL
TYPE
RATINGS 2Input BTUHCapacity BTUH (ICS) 3AFUE (ICS)Temp. rise (Min.-Max.) °F.
BLOWER DRIVEDiameter - Width (In.)No. UsedSpeeds (No.)CFM vs. in. w.g.Motor HPR.P.M.Volts / Ph / Hz
COMBUSTION FAN - TypeDrive - No. SpeedsMotor HP - RPMVolts / Ph / HzFLA
FILTER — Furnished?Type RecommendedHi Vel. (No.-Size-Thk.)
VENT PIPE DIAMETER — Min (In.) 56
HEAT EXCHANGERType-Fired
-UnfiredGauge (Fired)
ORIFICES — MainNat. Gas. Qty. — Drill SizeL.P. Gas Qty. — Drill Size
GAS VALVE
PILOT SAFETY DEVICEType
BURNERS — TypeNumber
POWER CONN. — V / Ph / Hz 4Ampacity (In Amps)Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DIMENSIONSCrated (In.)
WEIGHTShipping (Lbs.) / Net (Lbs)
ADX1B040A9241A
Downflow / Horizontal
40,00038,00091.0
30 - 60
DIRECT10 x 7
14
See Fan Performance Table1/5
1080115/1/60
CentrifugalDirect - 1
1/55 - 3000115/1/60
1.14
NoHigh Velocity
2 - 14x20 - 1in.
2 Round
Aluminized Steel - Type I
20
2 — 452 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot2
115/1/604.815
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
145 / 135
ADX1B060A9361A
Downflow / Horizontal
60,00056,00091.0
30 - 60
DIRECT10 x 8
14
See Fan Performance Table1/3
1075115/1/60
CentrifugalDirect - 1
1/55 - 3000115/1/60
1.0
NoHigh Velocity
2 - 14x20 - 1in.
2 Round
Aluminized Steel - Type I
20
3 — 453 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot3
115/1/609.215
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
155 / 145
ADX1B080A9421A
Downflow / Horizontal
80,00074,00091.0
35 - 65
DIRECT11 x 8
14
See Fan Performance Table1/2
1075115/1/60
CentrifugalDirect - 1
1/25 - 3200115/1/60
1.35
NoHigh Velocity
2 - 14x20 - 1in.
2 Round
Aluminized Steel - Type I
20
4 — 454 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot4
115/1/6011.415
1/2
H x W x D41-3/4 x 19-1/2 x 30-1/2
168 / 158
Notes1 Central Furnace heating designs are certified by AGA and ETL.2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea
level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500feet above sea level.
3 Based on U.S. government standard tests.4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.5 Refer to the Vent Length Table in the Installer's Guide or the Allowable Vent Length label located on the furnace.6 All *UX1 and *DX1 furnace models have a vent outlet diameter that equals 2".
12-1234-06 9
GeneralData
Product Specifications 1MODEL
TYPE
RATINGS 2Input BTUHCapacity BTUH (ICS) 3AFUE (ICS)Temp. rise (Min.-Max.) °F.
BLOWER DRIVEDiameter - Width (In.)No. UsedSpeeds (No.)CFM vs. in. w.g.Motor HPR.P.M.Volts / Ph / Hz
COMBUSTION FAN - TypeDrive - No. SpeedsMotor HP - RPMVolts / Ph / HzFLA
FILTER — Furnished?Type RecommendedHi Vel. (No.-Size-Thk.)
VENT PIPE DIAMETER — Min (In.) 56
HEAT EXCHANGERType-Fired
-UnfiredGauge (Fired)
ORIFICES — MainNat. Gas. Qty. — Drill SizeL.P. Gas Qty. — Drill Size
GAS VALVE
PILOT SAFETY DEVICEType
BURNERS — TypeNumber
POWER CONN. — V / Ph / Hz 4Ampacity (In Amps)Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DIMENSIONSCrated (In.)
WEIGHTShipping (Lbs.) / Net (Lbs)
ADX1D120A9601A
Downflow / Horizontal
120,000110,000
91.040 - 70
DIRECT11 x 10
14
See Fan Performance Table3/4
1075115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
0.71
NoHigh Velocity
2 - 16x20 - 1in.
3 Round
Aluminized Steel - Type I
20
6 — 456 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot6
115/1/6013.920
1/2
H x W x D41-3/4 x 26-1/2 x 30-1/2
206 / 196
ADX1C100A9481A
Downflow / Horizontal
100,00094,00091.0
35 - 65
DIRECT11 x 10
14
See Fan Performance Table1/2
1075115/1/60
CentrifugalDirect - 1
1/20 - 3450115/1/60
0.71
NoHigh Velocity
2 - 16x20 - 1in.
2.5 Round
Aluminized Steel - Type I
20
5 — 455 — 56
Redundant - Single Stage
Hot Surface Ignition
Multiport Inshot5
115/1/6013.620
1/2
H x W x D41-3/4 x 23 x 30-1/2
185 / 175
Notes1 Central Furnace heating designs are certified by AGA and ETL.2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea
level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500feet above sea level.
3 Based on U.S. government standard tests.4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.5 Refer to the Vent Length Table in the Installer's Guide or the Allowable Vent Length label located on the furnace.6 All *UX1 and *DX1 furnace models have a vent outlet diameter that equals 2".
10 12-1234-06
PerformanceData
FURNACE AIRFLOW (CFM) VS. EXTERNAL STATIC PRESSURE (in. w.c.)
MODEL SPEED TAP 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90
AUX1B040A9241A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
1043940837729
992895798694
930841752657
885791705600
812726649545
740650560478
647559438376
518420305220
457390279178
AUX1B060A9241A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
12471105991726
11751055956721
11171106920713
1057956879698
991901832674
925836776637
839767709582
717683628506
563582531406
AUX1B060A9361A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
139412501102957
135912321092944
131412021069922
126011601034891
11961106986853
11221040925806
1038962852750
945873766686
853771668614
AUX1B080A9241A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
156612501073809
152212381068804
147012171059797
141511911045792
135611581025783
12871114995764
12141063957738
11391006910705
1058942851659
AUX1B080A9421A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
174813751178859
168313671167863
161513471147856
154413141119839
147012681082811
139312101036772
13141139982723
12321056919663
1147960847592
AUX1C08019601A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2304198016681375
2262196316541372
2219194616401368
2170191916261361
2121189216111354
2048185315871330
1975181415621305
1893175115111267
1811168714601229
AUX1C100A9361A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2058183716291430
1983179716031415
1911175315731400
1835169615361371
1755162614871331
1672155314241289
1578146313431228
1467135012421138
1340122011171027
AUX1C100A9481A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2054193217621558
1980187517201546
1906181816771533
1826174616151477
1746167315521421
1649157714631350
1551148113731278
1428137112661175
1305126011581071
AUX1D100A9601A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2411210817721480
2358208317591477
2304205817451474
2235200717231458
2165195617001441
2083189316571414
2001182916131386
1915175415441327
1828167914751268
AUX1D120A9601A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2454210517471445
2406209217421447
2358207817361449
2310204517201440
2261201217031430
2184195016771400
2106188716511369
2017182615931325
1928176515351280
From D330656 Sh.1 Rev. 12
CFM VS. TEMPERATURE RISE
MODELCubic Feet Per Minute (CFM)
600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
AUX1B040A9241A 56 48 42 37 33
AUX1B060A9241A 56 50 45 42 39 36
AUX1B060A9361A 56 50 45 42 39 36
AUX1B080A9241A 61 56 51 48 44 42
AUX1B080A9421A 61 56 51 48 44 42
AUX1C080A9601A 61 56 51 48 44 42 39 37 35 33 32 30
AUX1C100A9361A 64 60 56 52 49 46 44 42
AUX1C100A9481A 64 60 56 52 49 46 44 42
AUX1D100A9601A 64 60 56 52 49 46 44 42 40 38
AUX1D120A9601A 63 59 56 53 50 48 46
From C340405 Sh. 1 Rev. 9
NOTE: See page 12 for factory heat & cool speed tap settings
12-1234-06 11
PerformanceData
FURNACE AIRFLOW (CFM) VS. EXTERNAL STATIC PRESSURE (in. w.c.)
MODEL SPEED TAP 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90
ADX1B040A9241A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
998856753647
965832728617
922797694581
870751650538
807695596490
735628533435
653550460375
561462378308
459363286235
ADX1B060A9361A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
148713421181877
142512911147863
136212401113849
128611821061820
120911241009791
11251047943739
1040989877686
935869779612
830769681537
ADX1B080A9421A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
1547148713881263
1498143613481234
1445138213021196
1386132512491150
1323126511911095
1254120211261032
118011371056960
11011069979879
1016998896790
ADX1C100A9481A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
1892177916301444
1827172615871416
1762167215441388
1688160514851348
1614153814261308
1531146013621246
1448138112971184
1354129112081108
1260120011191032
ADX1D120A9601A
4 -3 -2 -1 -
HIGH - BlackMED.-HIGH - BlueMED.-LOW - YellowLOW - Red
2213205717651468
2138200017331452
2062194317001435
2001188316521409
1939182216031382
1863175215521336
1786168115001290
1706159514241225
1625150813471159
From D330710 Rev.10
CFM VS. TEMPERATURE RISE
MODELCubic Feet Per Minute (CFM)
600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400
ADX1B040A9241A 56 48 42 37 34
ADX1B060A9361A 63 56 51 46 42 39 36 34
ADX1B080A9421A 61 56 52 48 45 42 40 37 35
ADX1C100A9481A 65 60 56 53 50 47 44 42 40 38 37 35
ADX1D120A9601A 67 63 59 56 53 51 48 46 44 42
From C330767 Sh. 1 Rev. 3
12 12-1234-06
ElectricalData
From Dwg. D342565 Rev. 1
AUX1 Wiring
12-1234-06 13
From Dwg. D342565 Rev. 1
AUX1 Schematic
14 12-1234-06From Dwg. D342566 Rev. 0
ADX1 Wiring
12-1234-06 15
ElectricalData
From Dwg. D342566 Rev. 0
ADX1 Schematic
16 12-1234-06
FieldWiring
OUTDOOR UNIT (NO TRANSFORMER)
SEE NOTE 6
From Dwg. B340388 Rev. 2
SEE NOTE 8
FURNACE
B/CB/C
TO 115 V 1 PH.,60 HZ., POWERSUPPLY PERLOCAL CODES
HUM SEENOTE 5
EAC SEENOTE 5
FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE1 STAGE HEATING, 1 STAGE COOLING
USING A 1 STAGE HEATING, 1 STAGE COOLING THERMOSTAT(OUTDOOR SECTION WITHOUT TRANSFORMER)
SEE NOTE 6
From Dwg. B341437 Rev. 1
FURNACE
TWIN
SEE NOTE 7
B/CB/C TO 115 V 1 PH.,60 HZ., POWERSUPPLY PERLOCAL CODES
HUM SEENOTE 5
EAC SEENOTE 5
FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE1 STAGE HEATING
USING A 1 STAGE HEATING THERMOSTATNO COOLING
12-1234-06 17
TwinningField Wiring
TWIN TWIN
R1 R1
TWINNING CONNECTION DIAGRAMFOR TWINNING 1 STAGE FURNACES WITH
SINGLE WIRE TWINNING FEATURE1 STAGE HEATING ONLY THERMOSTAT1 STAGE HEAT
ONLYTHERMOSTAT
(WITH FAN SWITCH) FURNACE NO. 1 FURNACE NO. 2
BLOWER OPERATION OF UNIT NO. 2 IS SYNCRONIZEDWITH UNIT NO. 1 VIA SIGNALS
FROM TWIN CONNECTION.
SEE NOTE 4
SEE NOTE 3
ISOLATION RELAY(FIELD SUPPLIED)
SEE NOTE 4
ISOLATION RELAYSEE NOTE 4
B/CB/CB/C
From Dwg. 21B341422 Rev. 3
TWIN TWIN
R1
R1
TWINNING CONNECTION DIAGRAMFOR TWINNING 1 STAGE FURNACES WITH
SINGLE WIRE TWINNING FEATURE1 STAGE HEAT / 1 STAGE COOL THERMOSTAT
1 STAGEHEATING / COOLING
THERMOSTAT FURNACE NO. 1 FURNACE NO. 2
BLOWER OPERATION OF UNIT NO. 2 IS SYNCRONIZEDWITH UNIT NO. 1 VIA SIGNALS
FROM TWIN CONNECTION.
SEE NOTE 4
SEE NOTE 5
ISOLATION RELAY(FIELD SUPPLIED)
SEE NOTE 4
ISOLATION RELAYSEE NOTE 4
OUTDOOR UNIT(NO TRANSFORMER)
OUTDOOR UNIT(WITH TRANSFORMER)
RC
ISOLATION RELAY(FIELD SUPPLIED)
SEE NOTE 3
B/CB/CB/C
From Dwg. 21B341423 Rev. 2
18 12-1234-06
Fro
m D
wg.
C34
1884
Rev
. 6AUX1 Outline Drawing(ALL DIMENSIONS ARE IN INCHES)
Dimensions
12-1234-06 19
Fro
m D
wg.
C34
1885
Rev
. 6ADX1 Outline Drawing(ALL DIMENSIONS ARE IN INCHES)
American Standard Heating & Air Conditioning has a policy of continuous product and product dataimprovement and it reserves the right to change design and specifications without notice.
American StandardHeating & Air Conditioning6200 Troup HighwayTyler, TX 75707
Literature Order Number 12-1234-06
File Number 12-1234-06
Supersedes 12-1234-05
Date 04/09
NOTES