Multiple options in your hands
VerSys® Porous Hip System
VerSys Porous Hip System
Among the most essential elements in successful porous hip
arthroplasty is a prosthesis that not only meets the specific
requirements of the patient, but also fits the treatment
philosophy of the surgeon. The complete VerSys Hip System
places comprehensive solutions in your hands by offering
a porous prosthesis to match a wide variety of primary
or revision needs.
The VerSys Porous Hip System facilitates kinematic
restoration by providing options that allow independent
adjustment of offset, leg length, and head center.
These biomechanical variables present an opportunity
to improve stability and range of motion by allowing
the surgeon to optimize joint geometry and limb position.
ComPreHenSiVe SolutionS
Simple instrument System includes use of a single rasp for all VerSys Porous Implants.
Primary and revision Components offer both proximally coated and extensively coated fixation surfaces. The revision stems also offer a bowed option.
large metaphyseal (lm) options add 4mm-5mm in the area of the medial curve to help fill larger proximal-medial anatomies for a more stable arthroplasty.1,2
Porous Surface options include a choice of sintered cobalt-chromium beads (top) or commercially pure titanium fiber metal (bottom).
Acetabular options include fiber metal or Trabecular Metal™ fixation surfaces. A wide variety of liner options are available to address head size and stability issues in both compression molded polyethylene and Longevity® Highly Crosslinked Polyethylene.
Sintered Cobalt-Chromium Beads
Commercially Pure Titanium Fiber Metal
optionsPrimAryFiber metal taper
Beaded midCoat
offset optionsSome VerSys Porous Stems are available with standard, extended, revision, and extra-extended offsets. By increasing offset without increasing leg length, these implants offer the opportunity to achieve joint stability without compromising leg length.
low Head Center optionA 125-degree neck angle option accommodates the varus hip without artificially lengthening the leg. This option not only lowers the head center, but also lateralizes the hip to increase abductor muscle tension for patients with diminished abductor strength.
large metaphyseal (lm) options add 4mm-5mm in the area of the medial curve to help fill larger proximal-medial anatomies for a more stable arthroplasty.1,2
Acetabular
●● ●● ●● ●● ●●● ●● ●● ●● Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Taper Taper LM Taper HA/TCP MidCoat MidCoat LM MidCoat MidCoat MidCoat HA/TCP Collarless LM Collarless
●● ●●● ● ●● ●● ●● ●● ● ● Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded MidCoat MidCoat LM MidCoat MidCoat MidCoat FullCoat FullCoat LM FullCoat FullCoat LHC Collarless LM Collarless LHC XEXT LM
40mm, 36mm, 32mm, 28mm, 26mm, 22mm (Co-Cr only) and 32mm, 28mm
Alumina Ceramic Heads
Non-holed Cluster-holed Multi-holed Spiked
Femoral HeadsTrilogy® Acetabular System
StD
reV
eXt
XeXt
lHC
●
●
●
●
●
PrimAryFiber metal midCoat
6-inch Beaded FullCoat Plus
●● ●● ●● ●● ●●● ●● ●● ●● Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Fiber Metal Taper Taper LM Taper HA/TCP MidCoat MidCoat LM MidCoat MidCoat MidCoat HA/TCP Collarless LM Collarless
●● ●●● ● ●● ●● ●● ●● ● ● Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded MidCoat MidCoat LM MidCoat MidCoat MidCoat FullCoat FullCoat LM FullCoat FullCoat LHC Collarless LM Collarless LHC XEXT LM
Non-holed Cluster-holed Multi-holed Spiked Non-holed Cluster-holed Multi-holed
Trabecular Metal Modular Cups Trabecular Metal Monoblock Acetabular Cup
Neutral 10-degree 20-degree 7mm Elevated Elevated Offset
Longevity Highly Crosslinked and Standard Polyethylene Liners
reViSion
7.5-inch 10-inch 8-inch 10-inch 7.5-inch 7.5-inch 10-inch 10-inch Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat Revision Revision Revision Revision Revision Revision Revision Revision Straight Straight Bowed Bowed Calcar Calcar Calcar Calcar Straight Straight Bowed Bowed w/10mm w/20mm w/10mm w/20mm Build-up Build-up Build-up Build-up
● ● ● ● ● ● ● ●
Beaded revision and revision Calcar
Oblique Eccentric
Trabecular Metal Restrictors
Trabecular Metal Augments
ZCA® Reconstruction Cage
ZCA Reconstruction Roof Ring
Size (mm)Stem type 9 10 11 12 13 13.5 14 15 16 16.5 17 18 19 19.5 20 21 22 22.5Fiber metal taper Standard Offset ● ● ● ● ● ● ● ● ● ● ● ● Extended Offset ● ● ● ● ● ● ● ● ● ● LM Standard Offset ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ LM Extended Offset ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
Fiber metal midCoat Standard Offset ● ● ● ● ● ● ● ● ● ● ● ●Collared Extended Offset ● ● ● ● ● ● ● ● ● ● LM Standard Offset ● ● ● ● ● ● ● ● ● ● LM Extended Offset ● ● ● ● ● ● ● ● ● ●
LM Extra-Extended Offset ● ● ● ● ● ●
Fiber metal midCoat Standard Offset ● ● ● ● ● ● ● ● ● ● ● ●Collarless Extended Offset ● ● ● ● ● ● ● ● ● ● LM Standard Offset ● ● ● ● ● ● ● ● ● ● LM Extended Offset ● ● ● ● ● ● ● ● ● ●
Beaded midCoat Standard Offset ● ● ● ● ● ● ● ● ● ● ●Collared Extended Offset ● ● ● ● ● ● ● ● ● ● LM Standard Offset ● ● ● ● ● ● ● ● ● ● LM Extended Offset ● ● ● ● ● ● ● ● ● ●
LM Extra-Extended Offset ● ● ● ● ● ●
Low Head Center Neck Angle ● ● ● ● ● ●
Beaded midCoat Standard Offset ● ● ● ● ● ● ● ● ● ●Collarless Extended Offset ● ● ● ● ● ● ● ● ● ● LM Standard Offset ● ● ● ● ● ● ● ● ● ● LM Extended Offset ● ● ● ● ● ● ● ● ● ●
6-inch Beaded Standard Offset ● ● ● ● ● ● ● ● ● ● ● ●FullCoat Plus Extended Offset ● ● ● ● ● ● ● ● ● ● ● ● LM Standard Offset ● ● ● ● ● ● ● ● ● ● ● ● LM Extended Offset ● ● ● ● ● ● ● ● ● ● ● ●
LM Extra-Extended Offset ● ● ● ● ● ● ● ●
Low Head Center Neck Angle ● ● ● ● ● ●
Beaded revision 7.5-inch Straight ● ● ● ● ● ● ● ●(1.5mm Increments) 10-inch Straight ● ● ● ● ● ● 8-inch Bowed (Left/Right) ● ● ● ● ● ● ● 10-inch Bowed (Left/Right) ● ● ● ● ● ● ●
Beaded revision 7.5-inch Straight 10mm ● ● ● ● ● ● ●
Calcar 7.5-inch Straight 20mm ● ● ● ● ● ●
(1.5mm Increments) 10-inch Bowed (Left/Right) 10mm ● ● ● ● ● ● ●
10-inch Bowed (Left/Right) 20mm ● ● ● ● ● ●
VerSys Porous Hip Prosthesis
7.5-inch 10-inch 8-inch 10-inch 7.5-inch 7.5-inch 10-inch 10-inch Beaded Beaded Beaded Beaded Beaded Beaded Beaded Beaded FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat FullCoat Revision Revision Revision Revision Revision Revision Revision Revision Straight Straight Bowed Bowed Calcar Calcar Calcar Calcar Straight Straight Bowed Bowed w/10mm w/20mm w/10mm w/20mm Build-up Build-up Build-up Build-up
● ● ● ● ● ● ● ●
StD eXt XeXt lHC reV
● ● ● ● ●
The challenge of a successful porous primary hip
arthroplasty is to achieve secure initial fixation
with minimal bone removal and maximum bone
ingrowth for long-term stability. The VerSys
Porous Primary System offers the features
and options designed to meet this
challenge with a patient-specific
implant that also fits the
surgeon’s preferences.
PrimAry imPlAnt oPtionS
Ti-Nidium® Surface Hardening Process on Tivanium® Ti-6Al-4V Alloy stems
increases surface hardness and abrasion resistance.5
Circumferential Porous Surface provides complete proximal
coverage for a greater area of bone ingrowth.3,4
Corundumized Surface Finish is designed to promote a
secure bone/implant interface and allow for bone ongrowth.
Tapered and Polished Distal Stem is designed to
discourage distal fixation and improve proximal loading.
6-inch Beaded FullCoatPlus
Beaded midCoatCollared
Fiber metalmidCoatlm
Fiber metalmidCoatHA/tCP
Extensively porous coated implants with sintered beads and strength enhancement zone.
Collared proximally porous coated implants with sintered beads or fiber metal.
Collarless proximally porous coated implants with sintered beads or fiber metal.
Calcicoat ® Ceramic Coating (HA/TCP) available on some fiber metal implants.
++7m
m+5
mm
large metaphyseal option helps the surgeon accommodate patients with proximal/distal femoral canal mismatch without compromising proximal fit and fill. The LM components add 4mm-5mm in the area of the medial curve to help fill larger proximal-medial anatomies for a more stable arthroplasty.1,2
three Progressive offset options are accomplished by a 5mm and 7mm medial translation of the neck. By increasing offset without increasing leg length, these implants offer the opportunity to achieve joint stability without compromise.
low Head Center optionwith a 125-degree neck angle accommodates the varus hip without artificially lengthening the leg. This option is designed to lower the head center, and lateralize the hip to increase abductor muscle tension.
125°
While the art of revision hip arthroplasty may never
be replaced by technology, it can be facilitated by
an implant system that frees the surgeon to focus
on the skill that guides their hands, and the
experience-bred intuition that molds their
surgical plan. The extensively porous
coated VerSys Beaded FullCoat
Revision Hip Prosthesis provides
the options to accommodate a
variety of bone conditions.
reViSion imPlAnt oPtionS
Paired progressive offsets and neck lengths facilitate leg length and offset restoration.
Large Metaphyseal (LM) bodies help fill proximal
defects and stabilize the arthroplasty.1,2
Extensive porous coating allows for proximal and distal ingrowth fixation.
Strength enhancement zone on the smaller sizes (13.5mm-15mm) helps to
provide greater strength in higher-stress areas.
two Calcar Build-up Heights of 10mm and 20mm accommodate patients with calcar deficiencies and allow deep seating into the canal so the body can be anchored in viable bone stock.
one-piece Stem Provisionals are available for the 8-inch and 10-inch bowed stems, as well as the 7.5-inch straight stems. Calcar block provisionals fit into the slots on the corresponding provisional stems.
Built-in Anteversionreplicates the natural anteversion of the femoral neck. This is accomplished by adding 8-degrees of anteversion to the body relative to the anterior bow of the stem and 8-degrees of anteversion to the neck relative to the body. This 16- degree anteversion permits use of the best available bone in the canal while allowing for a more anatomic stem position, particularly with the bowed stems.
20mm
10mm
8°
8°
8 and 10-inch BeadedFullCoatrevisionBowed
7.5 and 10-inch BeadedFullCoatrevisionStraight10-inch
BeadedFullCoatrevisionCalcarBowedw/10mm and 20mmBuild-up
7.5-inch BeadedFullCoatrevisionCalcarStraightw/10mm and 20mmBuild-up
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7862-009-00 9 110 30 33 35 38 40 24 28 31 35 38
00-7862-010-00 10 115 30 33 35 38 40 24 28 31 35 38
00-7862-011-00 00-7862-011-30 11 120 33 36 38 41 43 28 32 35 39 42
00-7862-012-00 00-7862-012-30 12 125 36 39 41 44 46 30 34 37 41 44
00-7862-013-00 00-7862-013-30 13 130 36 39 41 44 46 30 34 37 41 44
00-7862-014-00 00-7862-014-30 14 135 39 42 44 47 49 35 38 42 45 49
00-7862-015-00 00-7862-015-30 15 140 39 42 44 47 49 35 38 42 45 49
00-7862-016-00 00-7862-016-30 16 145 42 45 47 50 52 39 42 46 49 53
00-7862-017-00 00-7862-017-30 17 150 42 45 47 50 52 39 42 46 49 53
00-7862-018-00 00-7862-018-30 18 155 45 48 50 53 55 43 46 50 53 57
00-7862-019-00 00-7862-019-30 19 155 45 48 50 53 55 43 46 50 53 57
00-7862-020-00 00-7862-020-30 20 155 45 48 50 53 55 43 46 50 53 57
FiBer metAl tAPerStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-009-00 9 130 30 33 35 38 40 24 28 31 35 38
00-7841-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7841-011-00 00-7841-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7841-012-00 00-7841-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7841-013-00 00-7841-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7841-014-00 00-7841-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7841-015-00 00-7841-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7841-016-00 00-7841-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7841-017-00 00-7841-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7841-018-00 00-7841-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7841-019-00 00-7841-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7841-020-00 00-7841-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollAreD FiBer metAl miDCoAtStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7862-011-20 00-7862-011-50 11 120 38 41 43 46 48 31 34 38 41 45
00-7862-012-20 00-7862-012-50 12 125 41 44 46 49 51 33 36 40 43 47
00-7862-013-20 00-7862-013-50 13 130 41 44 46 49 51 33 36 40 43 47
00-7862-014-20 00-7862-014-50 14 135 44 47 49 52 54 37 41 44 48 51
00-7862-015-20 00-7862-015-50 15 140 44 47 49 52 54 37 41 44 48 51
00-7862-016-20 00-7862-016-50 16 145 47 50 52 55 57 41 45 48 52 55
00-7862-017-20 00-7862-017-50 17 150 47 50 52 55 57 41 45 48 52 55
00-7862-018-20 00-7862-018-50 18 155 50 53 55 58 60 46 49 53 56 60
00-7862-019-20 00-7862-019-50 19 155 50 53 55 58 60 46 49 53 56 60
00-7862-020-20 00-7862-020-50 20 155 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-011-20 00-7841-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7841-012-20 00-7841-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7841-013-20 00-7841-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7841-014-20 00-7841-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7841-015-20 00-7841-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7841-016-20 00-7841-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7841-017-20 00-7841-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7841-018-20 00-7841-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7841-019-20 00-7841-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7841-020-20 00-7841-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-015-40 15 160 51 54 56 59 61 41 44 48 51 55
00-7841-016-40 16 160 54 57 59 62 64 45 49 52 56 59
00-7841-017-40 17 160 54 57 59 62 64 45 49 52 56 59
00-7841-018-40 18 160 57 60 62 65 67 49 53 56 60 63
00-7841-019-40 19 160 57 60 62 65 67 49 53 56 60 63
00-7841-020-40 20 160 57 60 62 65 67 49 53 56 60 63
extra extended offset*
A
B
lm
CStD
CeXt
DeXt
DStD
A
lm
CStD
CeXt
B
DeXt
DStD
A
B
D
* The VerSys Fiber Metal Taper Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
* The VerSys Collared Fiber Metal MidCoat Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
CXeXt
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7862-009-00 9 110 30 33 35 38 40 24 28 31 35 38
00-7862-010-00 10 115 30 33 35 38 40 24 28 31 35 38
00-7862-011-00 00-7862-011-30 11 120 33 36 38 41 43 28 32 35 39 42
00-7862-012-00 00-7862-012-30 12 125 36 39 41 44 46 30 34 37 41 44
00-7862-013-00 00-7862-013-30 13 130 36 39 41 44 46 30 34 37 41 44
00-7862-014-00 00-7862-014-30 14 135 39 42 44 47 49 35 38 42 45 49
00-7862-015-00 00-7862-015-30 15 140 39 42 44 47 49 35 38 42 45 49
00-7862-016-00 00-7862-016-30 16 145 42 45 47 50 52 39 42 46 49 53
00-7862-017-00 00-7862-017-30 17 150 42 45 47 50 52 39 42 46 49 53
00-7862-018-00 00-7862-018-30 18 155 45 48 50 53 55 43 46 50 53 57
00-7862-019-00 00-7862-019-30 19 155 45 48 50 53 55 43 46 50 53 57
00-7862-020-00 00-7862-020-30 20 155 45 48 50 53 55 43 46 50 53 57
FiBer metAl tAPerStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-009-00 9 130 30 33 35 38 40 24 28 31 35 38
00-7841-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7841-011-00 00-7841-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7841-012-00 00-7841-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7841-013-00 00-7841-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7841-014-00 00-7841-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7841-015-00 00-7841-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7841-016-00 00-7841-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7841-017-00 00-7841-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7841-018-00 00-7841-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7841-019-00 00-7841-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7841-020-00 00-7841-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollAreD FiBer metAl miDCoAtStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7862-011-20 00-7862-011-50 11 120 38 41 43 46 48 31 34 38 41 45
00-7862-012-20 00-7862-012-50 12 125 41 44 46 49 51 33 36 40 43 47
00-7862-013-20 00-7862-013-50 13 130 41 44 46 49 51 33 36 40 43 47
00-7862-014-20 00-7862-014-50 14 135 44 47 49 52 54 37 41 44 48 51
00-7862-015-20 00-7862-015-50 15 140 44 47 49 52 54 37 41 44 48 51
00-7862-016-20 00-7862-016-50 16 145 47 50 52 55 57 41 45 48 52 55
00-7862-017-20 00-7862-017-50 17 150 47 50 52 55 57 41 45 48 52 55
00-7862-018-20 00-7862-018-50 18 155 50 53 55 58 60 46 49 53 56 60
00-7862-019-20 00-7862-019-50 19 155 50 53 55 58 60 46 49 53 56 60
00-7862-020-20 00-7862-020-50 20 155 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-011-20 00-7841-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7841-012-20 00-7841-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7841-013-20 00-7841-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7841-014-20 00-7841-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7841-015-20 00-7841-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7841-016-20 00-7841-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7841-017-20 00-7841-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7841-018-20 00-7841-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7841-019-20 00-7841-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7841-020-20 00-7841-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7841-015-40 15 160 51 54 56 59 61 41 44 48 51 55
00-7841-016-40 16 160 54 57 59 62 64 45 49 52 56 59
00-7841-017-40 17 160 54 57 59 62 64 45 49 52 56 59
00-7841-018-40 18 160 57 60 62 65 67 49 53 56 60 63
00-7841-019-40 19 160 57 60 62 65 67 49 53 56 60 63
00-7841-020-40 20 160 57 60 62 65 67 49 53 56 60 63
extra extended offset*
A
B
lm
CStD
CeXt
DeXt
DStD
A
lm
CStD
CeXt
B
DeXt
DStD
A
B
D
* The VerSys Fiber Metal Taper Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
* The VerSys Collared Fiber Metal MidCoat Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
CXeXt
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7845-009-00 9 130 30 33 35 38 40 24 28 31 35 38
00-7845-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7845-011-00 00-7845-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7845-012-00 00-7845-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7845-013-00 00-7845-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7845-014-00 00-7845-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7845-015-00 00-7845-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7845-016-00 00-7845-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7845-017-00 00-7845-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7845-018-00 00-7845-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7845-019-00 00-7845-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7845-020-00 00-7845-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollArleSS FiBer metAl miDCoAtStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7845-011-20 00-7845-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7845-012-20 00-7845-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7845-013-20 00-7845-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7845-014-20 00-7845-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7845-015-20 00-7845-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7845-016-20 00-7845-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7845-017-20 00-7845-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7845-018-20 00-7845-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7845-019-20 00-7845-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7845-020-20 00-7845-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7840-011-00 00-7840-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7840-012-00 00-7840-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7840-013-00 00-7840-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7840-014-00 00-7840-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7840-015-00 00-7840-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7840-016-00 00-7840-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7840-017-00 00-7840-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7840-018-00 00-7840-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7840-019-00 00-7840-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7840-020-00 00-7840-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollAreD BeADeD miDCoAtStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-011-20 00-7840-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7840-012-20 00-7840-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7840-013-20 00-7840-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7840-014-20 00-7840-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7840-015-20 00-7840-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7840-016-20 00-7840-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7840-017-20 00-7840-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7840-018-20 00-7840-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7840-019-20 00-7840-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7840-020-20 00-7840-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset
A
CStD
lm
CeXt
DStD
DeXt
B
A
B
lm
CStD
CeXt
DeXt
DStD
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-015-40 15 160 51 54 56 59 61 41 44 48 51 55
00-7840-016-40 16 160 54 57 59 62 64 45 49 52 56 59
00-7840-017-40 17 160 54 57 59 62 64 45 49 52 56 59
00-7840-018-40 18 160 57 60 62 65 67 49 53 56 60 63
00-7840-019-40 19 160 57 60 62 65 67 49 53 56 60 63
00-7840-020-40 20 160 57 60 62 65 67 49 53 56 60 63
extra extended offset
A
B
D
Prod. No. STD Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-011-10 11 130 38 40 43 45 47 25 28 32 35 38
00-7840-012-10 12 140 40 43 45 48 50 27 30 34 37 40
00-7840-013-10 13 140 40 43 45 48 50 27 30 34 37 40
00-7840-014-10 14 140 43 46 48 51 53 31 34 38 41 44
00-7840-015-10 15 150 43 46 48 51 53 31 34 38 41 44
00-7840-016-10 16 150 46 49 51 54 55 35 39 42 45 48
low Head Center
D
B
A
CXeXt
ClHC
* The VerSys Collarless Fiber Metal MidCoat Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7845-009-00 9 130 30 33 35 38 40 24 28 31 35 38
00-7845-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7845-011-00 00-7845-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7845-012-00 00-7845-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7845-013-00 00-7845-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7845-014-00 00-7845-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7845-015-00 00-7845-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7845-016-00 00-7845-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7845-017-00 00-7845-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7845-018-00 00-7845-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7845-019-00 00-7845-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7845-020-00 00-7845-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollArleSS FiBer metAl miDCoAtStandard offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7845-011-20 00-7845-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7845-012-20 00-7845-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7845-013-20 00-7845-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7845-014-20 00-7845-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7845-015-20 00-7845-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7845-016-20 00-7845-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7845-017-20 00-7845-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7845-018-20 00-7845-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7845-019-20 00-7845-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7845-020-20 00-7845-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset*
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-010-00 10 130 30 33 35 38 40 24 28 31 35 38
00-7840-011-00 00-7840-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7840-012-00 00-7840-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7840-013-00 00-7840-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7840-014-00 00-7840-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7840-015-00 00-7840-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7840-016-00 00-7840-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7840-017-00 00-7840-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7840-018-00 00-7840-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7840-019-00 00-7840-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7840-020-00 00-7840-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollAreD BeADeD miDCoAtStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-011-20 00-7840-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7840-012-20 00-7840-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7840-013-20 00-7840-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7840-014-20 00-7840-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7840-015-20 00-7840-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7840-016-20 00-7840-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7840-017-20 00-7840-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7840-018-20 00-7840-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7840-019-20 00-7840-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7840-020-20 00-7840-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset
A
CStD
lm
CeXt
DStD
DeXt
B
A
B
lm
CStD
CeXt
DeXt
DStD
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-015-40 15 160 51 54 56 59 61 41 44 48 51 55
00-7840-016-40 16 160 54 57 59 62 64 45 49 52 56 59
00-7840-017-40 17 160 54 57 59 62 64 45 49 52 56 59
00-7840-018-40 18 160 57 60 62 65 67 49 53 56 60 63
00-7840-019-40 19 160 57 60 62 65 67 49 53 56 60 63
00-7840-020-40 20 160 57 60 62 65 67 49 53 56 60 63
extra extended offset
A
B
D
Prod. No. STD Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7840-011-10 11 130 38 40 43 45 47 25 28 32 35 38
00-7840-012-10 12 140 40 43 45 48 50 27 30 34 37 40
00-7840-013-10 13 140 40 43 45 48 50 27 30 34 37 40
00-7840-014-10 14 140 43 46 48 51 53 31 34 38 41 44
00-7840-015-10 15 150 43 46 48 51 53 31 34 38 41 44
00-7840-016-10 16 150 46 49 51 54 55 35 39 42 45 48
low Head Center
D
B
A
CXeXt
ClHC
* The VerSys Collarless Fiber Metal MidCoat Hip Prosthesis is available with an HA/TCP coating. The product numbers for this option begin with a 65- prefix instead of a 00- prefix
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7847-011-00 00-7847-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7847-012-00 00-7847-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7847-013-00 00-7847-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7847-014-00 00-7847-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7847-015-00 00-7847-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7847-016-00 00-7847-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7847-017-00 00-7847-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7847-018-00 00-7847-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7847-019-00 00-7847-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7847-020-00 00-7847-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollArleSS BeADeD miDCoAtStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-06 00-7843-011-36 11 160 33 36 38 41 43 28 32 35 39 42
00-7843-012-06 00-7843-012-36 12 160 36 39 41 44 46 30 34 37 41 44
00-7843-013-06 00-7843-013-36 13 160 36 39 41 44 46 30 34 37 41 44
00-7843-014-06 00-7843-014-36 14 160 39 42 44 47 49 35 38 42 45 49
00-7843-015-06 00-7843-015-36 15 160 39 42 44 47 49 35 38 42 45 49
00-7843-016-06 00-7843-016-36 16 160 42 45 47 50 52 39 42 46 49 53
00-7843-017-06 00-7843-017-36 17 160 42 45 47 50 52 39 42 46 49 53
00-7843-018-06 00-7843-018-36 18 160 45 48 50 53 55 43 46 50 53 57
00-7843-019-06 00-7843-019-36 19 160 45 48 50 53 55 43 46 50 53 57
00-7843-020-06 00-7843-020-36 20 160 45 48 50 53 55 43 46 50 53 57
00-7843-021-06 00-7843-021-36 21 160 45 48 50 53 55 43 46 50 53 57
00-7843-022-06 00-7843-022-36 22 160 45 48 50 53 55 43 46 50 53 57
6-inCH BeADeD FullCoAt PluSStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7847-011-20 00-7847-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7847-012-20 00-7847-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7847-013-20 00-7847-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7847-014-20 00-7847-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7847-015-20 00-7847-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7847-016-20 00-7847-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7847-017-20 00-7847-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7847-018-20 00-7847-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7847-019-20 00-7847-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7847-020-20 00-7847-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-26 00-7843-011-56 11 160 38 41 43 46 48 31 34 38 41 45
00-7843-012-26 00-7843-012-56 12 160 41 44 46 49 51 33 36 40 43 47
00-7843-013-26 00-7843-013-56 13 160 41 44 46 49 51 33 36 40 43 47
00-7843-014-26 00-7843-014-56 14 160 44 47 49 52 54 37 41 44 48 51
00-7843-015-26 00-7843-015-56 15 160 44 47 49 52 54 37 41 44 48 51
00-7843-016-26 00-7843-016-56 16 160 47 50 52 55 57 41 45 48 52 55
00-7843-017-26 00-7843-017-56 17 160 47 50 52 55 57 41 45 48 52 55
00-7843-018-26 00-7843-018-56 18 160 50 53 55 58 60 46 49 53 56 60
00-7843-019-26 00-7843-019-56 19 160 50 53 55 58 60 46 49 53 56 60
00-7843-020-26 00-7843-020-56 20 160 50 53 55 58 60 46 49 53 56 60
00-7843-021-26 00-7843-021-56 21 160 50 53 55 58 60 46 49 53 56 60
00-7843-022-26 00-7843-022-56 22 160 50 53 55 58 60 46 49 53 56 60
extended offset
A
B
lm
CStD
CeXt
DStD
DeXt
A
B
lm
CStD
CeXt
DeXt
DStD
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-015-46 15 160 51 54 56 59 61 41 44 48 51 55
00-7843-016-46 16 160 54 57 59 62 64 45 49 52 56 59
00-7843-017-46 17 160 54 57 59 62 64 45 49 52 56 59
00-7843-018-46 18 160 57 60 62 65 67 49 53 56 60 63
00-7843-019-46 19 160 57 60 62 65 67 49 53 56 60 63
00-7843-020-46 20 160 57 60 62 65 67 49 53 56 60 63
00-7843-021-46 21 160 57 60 62 65 67 49 53 56 60 63
00-7843-022-46 22 160 57 60 62 65 67 49 53 56 60 63
extra extended offset
A
B
D
Prod. No. STD Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-16 11 150 38 40 43 45 47 25 28 32 35 38
00-7843-012-16 12 150 40 43 45 48 50 27 30 34 37 40
00-7843-013-16 13 150 40 43 45 48 50 27 30 34 37 40
00-7840-014-16 14 150 43 46 48 51 53 31 34 38 41 44
00-7843-015-16 15 150 43 46 48 51 53 31 34 38 41 44
00-7843-016-16 16 150 46 49 51 54 55 35 39 42 45 48
low Head Center
A
B
D
CXeXt
ClHC
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7847-011-00 00-7847-011-30 11 130 33 36 38 41 43 28 32 35 39 42
00-7847-012-00 00-7847-012-30 12 140 36 39 41 44 46 30 34 37 41 44
00-7847-013-00 00-7847-013-30 13 140 36 39 41 44 46 30 34 37 41 44
00-7847-014-00 00-7847-014-30 14 140 39 42 44 47 49 35 38 42 45 49
00-7847-015-00 00-7847-015-30 15 160 39 42 44 47 49 35 38 42 45 49
00-7847-016-00 00-7847-016-30 16 160 42 45 47 50 52 39 42 46 49 53
00-7847-017-00 00-7847-017-30 17 160 42 45 47 50 52 39 42 46 49 53
00-7847-018-00 00-7847-018-30 18 160 45 48 50 53 55 43 46 50 53 57
00-7847-019-00 00-7847-019-30 19 160 45 48 50 53 55 43 46 50 53 57
00-7847-020-00 00-7847-020-30 20 160 45 48 50 53 55 43 46 50 53 57
CollArleSS BeADeD miDCoAtStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-06 00-7843-011-36 11 160 33 36 38 41 43 28 32 35 39 42
00-7843-012-06 00-7843-012-36 12 160 36 39 41 44 46 30 34 37 41 44
00-7843-013-06 00-7843-013-36 13 160 36 39 41 44 46 30 34 37 41 44
00-7843-014-06 00-7843-014-36 14 160 39 42 44 47 49 35 38 42 45 49
00-7843-015-06 00-7843-015-36 15 160 39 42 44 47 49 35 38 42 45 49
00-7843-016-06 00-7843-016-36 16 160 42 45 47 50 52 39 42 46 49 53
00-7843-017-06 00-7843-017-36 17 160 42 45 47 50 52 39 42 46 49 53
00-7843-018-06 00-7843-018-36 18 160 45 48 50 53 55 43 46 50 53 57
00-7843-019-06 00-7843-019-36 19 160 45 48 50 53 55 43 46 50 53 57
00-7843-020-06 00-7843-020-36 20 160 45 48 50 53 55 43 46 50 53 57
00-7843-021-06 00-7843-021-36 21 160 45 48 50 53 55 43 46 50 53 57
00-7843-022-06 00-7843-022-36 22 160 45 48 50 53 55 43 46 50 53 57
6-inCH BeADeD FullCoAt PluSStandard offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7847-011-20 00-7847-011-50 11 130 38 41 43 46 48 31 34 38 41 45
00-7847-012-20 00-7847-012-50 12 140 41 44 46 49 51 33 36 40 43 47
00-7847-013-20 00-7847-013-50 13 140 41 44 46 49 51 33 36 40 43 47
00-7847-014-20 00-7847-014-50 14 140 44 47 49 52 54 37 41 44 48 51
00-7847-015-20 00-7847-015-50 15 160 44 47 49 52 54 37 41 44 48 51
00-7847-016-20 00-7847-016-50 16 160 47 50 52 55 57 41 45 48 52 55
00-7847-017-20 00-7847-017-50 17 160 47 50 52 55 57 41 45 48 52 55
00-7847-018-20 00-7847-018-50 18 160 50 53 55 58 60 46 49 53 56 60
00-7847-019-20 00-7847-019-50 19 160 50 53 55 58 60 46 49 53 56 60
00-7847-020-20 00-7847-020-50 20 160 50 53 55 58 60 46 49 53 56 60
extended offset
Prod. No. STD Body
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-26 00-7843-011-56 11 160 38 41 43 46 48 31 34 38 41 45
00-7843-012-26 00-7843-012-56 12 160 41 44 46 49 51 33 36 40 43 47
00-7843-013-26 00-7843-013-56 13 160 41 44 46 49 51 33 36 40 43 47
00-7843-014-26 00-7843-014-56 14 160 44 47 49 52 54 37 41 44 48 51
00-7843-015-26 00-7843-015-56 15 160 44 47 49 52 54 37 41 44 48 51
00-7843-016-26 00-7843-016-56 16 160 47 50 52 55 57 41 45 48 52 55
00-7843-017-26 00-7843-017-56 17 160 47 50 52 55 57 41 45 48 52 55
00-7843-018-26 00-7843-018-56 18 160 50 53 55 58 60 46 49 53 56 60
00-7843-019-26 00-7843-019-56 19 160 50 53 55 58 60 46 49 53 56 60
00-7843-020-26 00-7843-020-56 20 160 50 53 55 58 60 46 49 53 56 60
00-7843-021-26 00-7843-021-56 21 160 50 53 55 58 60 46 49 53 56 60
00-7843-022-26 00-7843-022-56 22 160 50 53 55 58 60 46 49 53 56 60
extended offset
A
B
lm
CStD
CeXt
DStD
DeXt
A
B
lm
CStD
CeXt
DeXt
DStD
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-015-46 15 160 51 54 56 59 61 41 44 48 51 55
00-7843-016-46 16 160 54 57 59 62 64 45 49 52 56 59
00-7843-017-46 17 160 54 57 59 62 64 45 49 52 56 59
00-7843-018-46 18 160 57 60 62 65 67 49 53 56 60 63
00-7843-019-46 19 160 57 60 62 65 67 49 53 56 60 63
00-7843-020-46 20 160 57 60 62 65 67 49 53 56 60 63
00-7843-021-46 21 160 57 60 62 65 67 49 53 56 60 63
00-7843-022-46 22 160 57 60 62 65 67 49 53 56 60 63
extra extended offset
A
B
D
Prod. No. STD Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-011-16 11 150 38 40 43 45 47 25 28 32 35 38
00-7843-012-16 12 150 40 43 45 48 50 27 30 34 37 40
00-7843-013-16 13 150 40 43 45 48 50 27 30 34 37 40
00-7840-014-16 14 150 43 46 48 51 53 31 34 38 41 44
00-7843-015-16 15 150 43 46 48 51 53 31 34 38 41 44
00-7843-016-16 16 150 46 49 51 54 55 35 39 42 45 48
low Head Center
A
B
D
CXeXt
ClHC
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-81/82/11/12 13.5 200/200/250/250 39 42 44 46 49 31 35 38 42 45
00-7843-015-81/82/11/12 15 200/200/250/250 42 45 47 49 52 36 39 42 46 49
00-7843-016-81/82/11/12 16.5 200/200/250/250 42 45 47 50 52 36 39 43 46 49
00-7843-018-81/82/11/12 18 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-019-81/82/11/12 19.5 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-021-81/82/11/12 21 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-022-81/82/11/12 22.5 200/200/250/250 45 48 50 52 55 42 46 49 53 56
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Resection Level (mm) When
Head/Neck Component Selected is:
-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-91/92 13.5 240/240 39 42 44 46 49 42 44 46 49 51
00-7843-015-71/72/91/92 15 230/230/240/240 42 45 47 49 52 55/45 57/47 60/50 62/52 65/55
00-7843-016-71/72/91/92 16.5 230/230/240/240 42 45 47 49 52 55/45 58/48 60/50 63/53 65/55
00-7843-018-71/72/91/92 18 230/230/240/240 45 48 50 52 55 62/52 64/54 67/57 69/59 72/62
00-7843-019-71/72/91/92 19.5 230/230/240/240 45 48 50 52 55 62/52 65/55 67/57 70/60 72/62
00-7843-021-71/72/91/92 21 230/230/240/240 45 48 50 52 55 63/53 65/55 68/58 70/60 73/63
00-7843-022-71/72/91/92 22.5 230/230/240/240 45 48 50 52 55 63/53 66/56 68/58 70/60 73/63
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-012-18 12 190 36 39 41 43 46 30 33 37 40 44
00-7843-013-18 13.5 190 39 42 44 46 49 31 35 38 42 45
00-7843-015-18/24 15 190/250 42 45 47 49 52 36 39 43 46 50
00-7843-016-18/24 16.5 190/250 42 45 47 49 52 36 39 43 46 50
00-7843-018-18/24 18 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-019-18/24 19.5 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-021-18/24 21 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-022-18/24 22.5 190/250 45 48 50 52 55 42 46 49 53 56
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Resection Level (mm) When
Head/Neck Component Selected is:
-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-07 13.5 177 39 42 44 46 49 42 44 46 49 51
00-7843-015-17/07 15 167/177 42 45 47 49 52 55/45 57/47 60/50 62/52 65/55
00-7843-016-17/07 16.5 167/177 42 45 47 49 52 55/45 58/48 60/50 63/53 65/55
00-7843-018-17/07 18 167/177 45 48 50 52 55 62/52 64/54 67/57 69/59 72/62
00-7843-019-17/07 19.5 167/177 45 48 50 52 55 62/52 65/55 67/57 70/60 72/62
00-7843-021-17/07 21 167/177 45 48 50 52 55 63/53 65/55 68/58 70/60 73/63
00-7843-022-17/07 22.5 167/177 45 48 50 52 55 63/53 66/56 68/58 70/60 73/63
BeADeD FullCoAt reViSion8/10-inch Bowed (left/right)
BeADeD FullCoAt reViSion7.5/10-inch Straight (left/right)
10-inch Bowed – Calcar
(left/right, 10 and 20mm Build-up)
7.5-inch Straight – Calcar
(10 and 20mm Build-up)
A
B
D
C
A
B
D
C
A
B
D
C
A
B
D
C
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-81/82/11/12 13.5 200/200/250/250 39 42 44 46 49 31 35 38 42 45
00-7843-015-81/82/11/12 15 200/200/250/250 42 45 47 49 52 36 39 42 46 49
00-7843-016-81/82/11/12 16.5 200/200/250/250 42 45 47 50 52 36 39 43 46 49
00-7843-018-81/82/11/12 18 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-019-81/82/11/12 19.5 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-021-81/82/11/12 21 200/200/250/250 45 48 50 52 55 42 46 49 53 56
00-7843-022-81/82/11/12 22.5 200/200/250/250 45 48 50 52 55 42 46 49 53 56
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Resection Level (mm) When
Head/Neck Component Selected is:
-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-91/92 13.5 240/240 39 42 44 46 49 42 44 46 49 51
00-7843-015-71/72/91/92 15 230/230/240/240 42 45 47 49 52 55/45 57/47 60/50 62/52 65/55
00-7843-016-71/72/91/92 16.5 230/230/240/240 42 45 47 49 52 55/45 58/48 60/50 63/53 65/55
00-7843-018-71/72/91/92 18 230/230/240/240 45 48 50 52 55 62/52 64/54 67/57 69/59 72/62
00-7843-019-71/72/91/92 19.5 230/230/240/240 45 48 50 52 55 62/52 65/55 67/57 70/60 72/62
00-7843-021-71/72/91/92 21 230/230/240/240 45 48 50 52 55 63/53 65/55 68/58 70/60 73/63
00-7843-022-71/72/91/92 22.5 230/230/240/240 45 48 50 52 55 63/53 66/56 68/58 70/60 73/63
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Neck Length (mm) When Head/Neck Component
Selected is:-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-012-18 12 190 36 39 41 43 46 30 33 37 40 44
00-7843-013-18 13.5 190 39 42 44 46 49 31 35 38 42 45
00-7843-015-18/24 15 190/250 42 45 47 49 52 36 39 43 46 50
00-7843-016-18/24 16.5 190/250 42 45 47 49 52 36 39 43 46 50
00-7843-018-18/24 18 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-019-18/24 19.5 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-021-18/24 21 190/250 45 48 50 52 55 42 46 49 53 56
00-7843-022-18/24 22.5 190/250 45 48 50 52 55 42 46 49 53 56
Prod. No. LM Body
A Stem Size
(mm)
B Stem
Length (mm)
C Offset (mm) When
Head/Neck Component Selected is:
D Resection Level (mm) When
Head/Neck Component Selected is:
-3.5 +0 +3.5 +7 +10.5 -3.5 +0 +3.5 +7 +10.5
00-7843-013-07 13.5 177 39 42 44 46 49 42 44 46 49 51
00-7843-015-17/07 15 167/177 42 45 47 49 52 55/45 57/47 60/50 62/52 65/55
00-7843-016-17/07 16.5 167/177 42 45 47 49 52 55/45 58/48 60/50 63/53 65/55
00-7843-018-17/07 18 167/177 45 48 50 52 55 62/52 64/54 67/57 69/59 72/62
00-7843-019-17/07 19.5 167/177 45 48 50 52 55 62/52 65/55 67/57 70/60 72/62
00-7843-021-17/07 21 167/177 45 48 50 52 55 63/53 65/55 68/58 70/60 73/63
00-7843-022-17/07 22.5 167/177 45 48 50 52 55 63/53 66/56 68/58 70/60 73/63
BeADeD FullCoAt reViSion8/10-inch Bowed (left/right)
BeADeD FullCoAt reViSion7.5/10-inch Straight (left/right)
10-inch Bowed – Calcar
(left/right, 10 and 20mm Build-up)
7.5-inch Straight – Calcar
(10 and 20mm Build-up)
A
B
D
C
A
B
D
C
A
B
D
C
A
B
D
C
Contact your Zimmer representative or visit us at www.zimmer.com
97-7
841-
101-
00 R
ev. 1
7.5
ML
Pri
nted
in U
SA ©
2005
Zim
mer
, Inc
.
1 Lawrence JM, Engh CA, Macalino GE, et al. Outcome of revision hip arthroplasty done without cement. J Bone Joint Surg. 1994;76-A(7):965-972.
2 Sugiyama H, Whiteside LA, Engh CA, et al. Late mechanical stability of the proximal coated AML prostheses. Orthopaedics. 1994;17(7):583-588.
3 Smith E, Harris WH. Increasing prevalence of femoral lysis in cementless total hip arthroplasty. J Arthroplasty. 1995;10(4):407-412.
4 Bobyn JD, Jacobs JJ, Tanzer M, et al. The susceptibility of smooth implant surfaces to peri-implant fibrosis and migration of polyethylene wear debris. Clin Orthop. 1995;311:21-39.
5 Zimmer. Improved abrasion resistance of nitrogen-hardened titanium alloy surfaces. Current Topics. 1991;3:6.
6 Dujovne AR, Bobyn JD, Krygier JJ, et al. Mechanical compatibility of noncemented hip prostheses with the human femur. J Arthroplasty. 1993;8(1):7-22.
7 Bobyn JD, Glassman AH, Goto H, et al. The effect of stem stiffness on femoral bone resorption after canine porous-coated total hip arthroplasty. Clin Orthop. 1990;261:196-213.