WAGO Energy Data ManagementEfficiency Is That Easy!
Find out more here:www.wago.com/energymanagement
2
MEASUREMENT SYSTEM WITH ADDED VALUE
This user-friendly solution, consisting of software combined with a modular control system, records measurement data from different media and influential factors for energy monitoring and pro-cesses them for further analyses, archiving and reporting.
With application controllers from the high- powered PFC200 family, data from meters and sensors can be easily collected by one conve-nient input module and parameterized through the available software application – no program-ming necessary.
Easy parameter setting – not programming
PFC200 Application Controller(750-8202/000-022 and 750-8207/000-022)
3
ADVANTAGES:• Modular energy and process data collection, management and visualization
User-friendly energy data evaluation and derivation of efficiency plans• Easy input parameterization via Web visualization No programming experience required• Connect existing sensors to the WAGO-I/O-SYSTEM Integration into existing systems for flexibility and maximum return on investment• Scalable, modular I/O system Hassle-free expansions at any time
750-820x/ 000-022
15-minute pulse (power supply)
S0 counter,pulse counter
Current and voltagemeasurement
Flow, pressure,temperature, etc.
Computer Database
WAGO-I/O-SYSTEM 750
ETHERNET
Switch on and offDO
DI
DI 3-PH M-Bus
AI EnOcean
4
Software• Simple allocation of specific meter
data and sensors• Convenient data logging to suit
your requirements• Transparent function check via
measurement data visualization• Automatically detect hardware
upgrade
RECORD, VISUALIZE AND EVALUATE ENERGY DATA Individual, Easy, Expandable
Controller and Input Modules• High-performance controller with integrated
Webserver• Connect to existing networks via ETHERNET
or WLAN router• Extensive range of analog and digital input
modules for 3-phase power measurement• Interfaces for connecting M-Bus meters and
wireless-based EnOcean sensors
Components for Electrical Energy Measurement• Current transformers for connecting electrical
installations of different rated currents• Voltage taps for voltage measurement• Ready to easily retrofit into existing systems
5
FIVE EASY STEPS To WAGO Energy Data Management
1. Select the hardware needed; information about the I/O modules and current transformers to be used is available under: www.wago.com/io-systems
2. Download the “WAGO Energy Data Management” Software from www.wago.com/application-edm and transfer to the application controller.
3. Install hardware.
4. Set the energy data management parameters.
5. Direct connection via MODBUS TPC/UDP; send CSV files via FTP or FTPS.
We will be glad to assist you if you have questions! Phone: +49 (0) 571 887-222
6
Leistung [kW]
Zeit
FEATURES
Switch Digital Outputs via MODBUS
When higher-level software that functions as MODBUS master is used, digital outputs can be actuated via MODBUS TCP or MODBUS UDP. This way, systems can be switched on or off based on events or time.
This is how it works:
ADVANTAGES:• Event- or time-based system switching via MODBUS master
possible• Defined MODBUS register for easy connection• Load spike prevention
750-820x/000-022
Computer
WAGO-I/O-SYSTEM 750
ETHERNET
MODBUS TCP
7
Easy Configuration and Commissioning
Data Logging
• Cyclical data logging in CSV format for up to 80 channels – save data to an SD card
• Easy export of logged channel overview as CSV data for measurement point documentation
• Automatic detection of connected I/O modules• Transparent, clearly structured configuration pages
No previous programming experience required!
8
Data Transfer
MODBUS Interface • All measurement values for up to 32 connected I/O modules are saved in the defined
MODBUS register area. • Up to 80 measurement channels are saved in the dynamic MODBUS register area,
along with current measurement values and specified measuring point designations. With this approach, you can conveniently transfer pre-specified designations to a higher-order software system.
• Visualize configured data points as line or bar charts via data plotter.
• Visualize several data points over the same time interval for an initial benchmark.
FEATURES
Visualization
9
FTP Function The measurement series saved on an SD card can be transmitted to a previously selected server via FTP or FTPS. This transmission can be actuated either manually or automatically at a user-specified time interval.
Cybersecurity
• The transmission path is secured with OpenVPN or IPsec.• Security functions such as port management, MAC address
filter and firewall are also available. • It is also possible to operate two separate networks on the
controller.
Maximum Return on Investment
• Thanks to its scalability, the modular I/O system can be expanded at any time.
10
FEATURES
Decentralized Measurements via Internal Bus Extensions
In control centers, measurements are often included within several control cabinets. The internal data bus extension offers an economical solution to map these detached measuring points on one controller. Up to ten bus exten-sions are possible for such an application. The physical connection is via patch cable (max. length 5 m per cable)
This is how it works:
In this example, the application controller is installed as an intelligent head station with cor-responding in- and outputs in control cabinet 1. The decentralized detached stations of control cabinets 2 to 10 are connected to the bus exten-sion (750-627) via the end module.
The decentralized detached stations are connected to the bus extension (750-628) via coupler module. The coupler module is equipped with two RJ-45 sockets (input + output) so the network can be routed to the next decentralized station via the second RJ-45 port.
Because the sum currents of the internal local buses are limited, a power supply module (750-613) is recommended for each station.
750-820x/000-022
Control Cabinet 1
750-628
Control Cabinet 2
24 VDC Power Supply e.g., 787-1012
24 VDC Power Supply e.g., 787-1012
11
ADVANTAGES:• Cost-effective detached measurement point connection• Data handling via application controller• Modular expansions at any time
Example: Decentralized Station
Control Cabinet 3 Control Cabinet 10
750-628 750-628
750-628 750-613 E.g., 750-495/000-002 750-600
Supply Module
24 VDC Power Supply e.g., 787-1012
24 VDC Power Supply e.g., 787-1012
Coupler Module for Bus Extension
End ModuleAnalog Input Modules
12
Gateways
M-Bus Master(Item No. 753-649)With the M-Bus Master Module, up to 40 M-Bus meters can be connected to the WAGO Energy Data Management System. The meters are powered directly via the bus.
EnOcean Gateway(Item No. 2852-7101)Wireless telegrams can be received from En-Ocean temperature and humidity sensors via the EnOcean Gateway. The EnOcean Gateway is connected to the WAGO Energy Data Management System via serial interface (Item No. 750-652).
SUPPORTED HARDWARE
Base Unit
750-820x/000-022PFC 200 Application Controller for WAGO Energy Data Management System
The application controller is the basic platform for an energy data management application.
750-600The end module completes the internal data bus, ensuring flawless data transmission.
13
I/O Modules
Module Max. Number
750-402 4-channel digital input, 24 VDC, 3.0 ms
1
750-638 2-channel up/down counter, 24 VDC, 500 Hz
4
750-496 8-channel analog input, 0 … 20 mA/4 … 20 mA, single-ended
2
750-497 8-channel analog input, 0 … 10 VDC / ±10 V, single-ended
2
750-451 8-channel analog input, for resistance sensors
2
750-452 2-channel analog input, 0 … 20 mA / 4 … 20 mA, differential input
1
750-495 3-phase power measurement, 690 V, 1 A
Max. 18 (individually selectable)
750-495/000-001 3-phase power measurement, 690 V, 5 A
750-495/000-002 3-phase power measurement, 690 V, RTC
753-649 M-Bus master
1
750-530 8-channel digital output, 24 VDC, 0.5 A
1
The WAGO Energy Data Management System supports the following WAGO-I/O-SYSTEM modules:
Module Quantity
750-627 End module for bus extension
Max. 1
750-628 Coupler module for bus extension
1 … 10
750-613 Power supply module, 24 VDC system supply
1 … 10
750-600 End module
1 … 10
787-1012 EPSITRON® COMPACT Power Supply, 24 VDC
1 … 10
Components for Decentralized Measurements:
14
SUPPORTED HARDWARE
The Application Controller
The application controller (750-8202/000-022) is equipped with an RJ-45 connector for easy connection to an ETHERNET network.
Accessories
Power Supply Data Recording Commissioning
787-1606 787-1012 758-879/000-001 750-923
Switched-mode power supply, 24 VDC / 2 A
Switched-mode power supply, 24 VDC / 2.5 A
SD memory card, 2 GB WAGO USB communication cable, 2.5 m long
24 VDC are needed to supply the I/O system. An SD memory card meeting industry standards is needed to save measurement values.Recommended: 2 GB
15
No Network Connection – No Problem!
Not all locations that WAGO Energy Management might be used at will have a cable network connec-tion or WLAN modem. For these cases, the applica-tion controller (750-8207/000-022) with integrated mobile modem is available.
FURTHER INFORMATION AVAILABLE HERE:
• Commissioning Tutorial for the Application Controller www.wago.com/start-up-edm-controller
• Product Film “WAGO Energy Data Management” www.wago.com/edm-product-video
• Energy Data Management Documentation www.wago.com/application-edm-doku
Additional information and contacts at: http://www.wago.com/energiemanagement
These application controllers require an antenna, e.g., magnetic base antenna (758-965).
Headquarters +49 571/ 887 - 0Sales +49 571/ 887 - 222Orders +49 571/ 887 - 44 333Fax +49 571/ 887 - 844 169
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. “Copyright – WAGO Kontakttechnik GmbH & Co. KG – All rights reserved. The content and structure of the WAGO websites, catalogs, videos and other WAGO media are subject to copy-right. Distribution or modification to the contents of these pages and videos is prohibited. Furthermore, the content may neither be copied nor made available to third parties for commer-cial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties.”
WAGO Kontakttechnik GmbH & Co. KGPostfach 2880 · 32385 Minden, GermanyHansastraße 27 · 32423 [email protected] 08
88-0
599/
0002
-690
1 –
FLY
ER E
NER
GY D
ATA
MAN
AGEM
ENT
1.1
US –
11/
2017
-00
– Pr
inte
d in
Ger
man
y –
Subj
ect t
o de
sign
cha
nges