Medical Resin Selection Booklet
We take healthcare personally.
Healthcare companies need medical-grade plastic resin that meets a wide range of specifications and regulatory requirements. That’s why M. Holland has developed deep expertise in helping our clients optimize material selection and purchase these raw materials.
We offer a full line of medical grade resins, each with full regulatory documentation. Our industry experts support your team in early-stage product development with material selection, and advise on supply chain risk and regulatory qualifications.
Our goal is the same as yours: supporting the creation of safe and effective medical devices from design to global commercialization.
We offer:Globally sourced resinWe distribute a full range of medical grade resins used in the manufacture of medical devices—from complex orthopedics and surgical tools to packaging, from reusables to disposables, from medical electronics to in-vitro diagnostics.
Formulation controlOur medical grade resins have fixed formulations. We have carefully selected materials that carry the lowest levels of supply chain risk—giving you the highest levels of consistency and reliability.
Risk managementWe reduce supply chain risk by using globally committed suppliers and driving selection toward widely accepted medical grade resins that are commonly stocked in our warehouses.
Biocompatibility statementYou will have access to biocompatibility statements on all medical grade resins, which have ISO 10993, U.S. Pharmacopeia (USP), European Union or other similar regulatory body testing available through our product stewardship department.
Change managementWe provide immediate notification of any changes to our medical grade resins. To minimize change and disruption, we secure “last buy” opportunities when possible and regularly provide guidance on alternative solutions and materials. We also provide dual sourcing resin selections to diversify the supply chain risk where possible.
Visit mholland.com | Call +1 800-872-7370
Our Healthcare Suppliers
BASF
Ultradur® PBT Polyester
Ultrason® Polyarylsulfones
PSU | PPSU | PESU
Petra® PET Polyester
Ultraform® POM Acetal
Copolymer
CHEVRON PHILLIPS
MARFLEX® LDPE
HDPE | LDPE | LLDPE
MARFLEX® Metallocene LLDPE
MARLEX® HDPE
MARLEX® HMW
COVESTRO
Apec® high-heat PC
Bayblend® PC/ABS
Makroblend® PC/Polyester
Makrolon® PC
Texin® TPU
Desmopan® TPU
ELASTRON
SEBS
SBS
TPV
FLINT HILLS RESOURCES
Polypropylene
Homopolymer
Random Copolymer
Impact Copolymer
INEOS STYROLUTION
Lustran® ABS
Novodur® ABS
Novodur® High Heat ABS
Triax® ABS+ PA
Terlux® MABS
Clearblend® MBS
Zylar® MBS
Luran® SAN
Lustran® SAN
NAS® SMMA
K-Resin® SBC
Styroflex® SBC
Styrolux® SBC
Styrolution® PS
GPPS | HIPS
LOTTE ADVANCED MATERIALS
starex® ABS
INFINO® PC
PLASKOLITE
Optix® PMMA
Acrylic Resins
TEKNOR APEX
Apex® PVC
TOTAL
Polypropylene
Homopolymer
Random Copolymer
Impact Copolymer
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
ABS INEOS Styrolution Lustran® 248 FC 13 MFR [ 220C/10kg ], global, Chemical resistance data available.
EtO, Gamma/E-Beam DMF, USP VI, ISO, FDA Natural/Opaque
ABS INEOS Styrolution Lustran® 348* 14 MFR, global, std flow EtO, Gamma/E-Beam DMF, USP VI, ISO, FDA Natural, Black, and White
ABS INEOS Styrolution Lustran® 308 21 MFI, standard grade 2, low gloss EtO, Gamma/E-Beam, NO2
USP VI, ISO Natural
ABS INEOS Styrolution Novodur® HD 15 15 MVR [ 220C/10kg ], standard grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Natural
ABS INEOS Styrolution Novodur® M205FC 20 MVR, standard grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Natural
ABS INEOS Styrolution Novodur® M203FC 31 MVR, standard grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Natural
ABS Lotte Advanced Materials
MR-0130 30 MFI, gamma stabile, chemical resistance data available, MTO, import grade
EtO, Gamma/E-Beam USP VI, ISO, FDA Opaque
ABS Lotte Advanced Materials
MR-0500 3 MFI - clear, gamma stable, MTO, import grade EtO, Gamma/E-Beam USP VI, ISO, FDA Transparent
ABS Si2 INEOS Styrolution Lustran® 349 Silicone lubricant, made to order EtO, Gamma/E-Beam DMF, USP VI, ISO, FDA Natural/Opaque
Acrylic Plaskolite OPTIX® CA-1000IG 1.6 MVR, fracture toughness, high impact Gamma USP VI Transparent
Acrylic Plaskolite OPTIX® CA-82F 2.4 MVR, high heat resistance, injection molding grade
Gamma FDA Transparent
Acrylic Plaskolite OPTIX® CA-71F 4.3 MVR, high heat resistance, injection and extrusion process grade
Gamma FDA Transparent
Acrylic Plaskolite OPTIX® CA-927G 2.5 MVR, injection molding grade, medium impact strength, high flow
Gamma ray sterilizable FDA Transparent
Acrylic Plaskolite OPTIX® CA-924G 6.3 MVR, transparent, good impact, insulating, weather resistant
Radiation sterilizable FDA Transparent
Acrylic Plaskolite OPTIX® CA-41 UVT 26 MVR, ultra violet light transmitting Gamma FDA Transparent
GPPS INEOS Styrolution Styrolution 1200 1.6 MFI, high heat, thermoforming foam sheet USP VI Transparent
GPPS INEOS Styrolution Styrolution 1300 3 MFI, high heat, unlubed USP VI Transparent
GPPS INEOS Styrolution Styrolution 1301 3 MFI, high heat, lubed USP VI Transparent
GPPS INEOS Styrolution Styrolution 3600 14 MFI, unlubed USP VI Transparent
GPPS INEOS Styrolution Styrolution 3601 14 MFI, lubed USP VI Transparent
HIPS INEOS Styrolution Styrolution 5400 3 MFI, high impact, low gloss, unlubed USP VI Opaque
*Focus grades Visit mholland.com | Call +1 800-872-7370
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
HIPS INEOS Styrolution Styrolution 5601 8 MFI, tough, rigid, lubed USP VI Opaque
HIPS INEOS Styrolution Styrolution 5801 14 MFI, high impact, high toughness USP VI Opaque
HDPE Chevron Phillips Marlex® HHM5502BN*
0.955 density, tailored for lightweight blow molding
DMF, USP VI, USP 26 Natural
HDPE Chevron Phillips Marlex® HHM5202BN*
0.951 density, tailored for lightweight blow molding
DMF, FDA Natural
HDPE Chevron Phillips Marlex® 9012* Ethylene-hexene copolymer injection molding, good flow, impact strength and stiffness; 12 melt
DMF, USP VI, FDA Natural
HDPE Chevron Phillips Marlex® 9018* 0.952 HDPE injection molding grade; 20 melt DMF, USP VI, FDA Natural
HDPE Chevron Phillips Marlex® 9006* 0.953 HDPE injection molding grade; 6.5 melt DMF, USP VI, FDA Natural
HDPE Chevron Phillips Marlex® 9708* 8 MFR, 0.962 HDPE injection molding grade USP 39, USP 26, FDA Natural
HMWHDPE Chevron Phillips Marlex® HXM 50100
0.948 density, extra high molecular weight grade for large part blow molding
DMF, FDA, USP 39 Natural
MLLDPE Chevron Phillips Marlex® D143 0.916 metallocene for all blown film applications requiring high dart and excellent clarity
DMF, FDA, USP Clarified
LDPE Chevron Phillips Marlex® 1122B* 0.920 density for blow molding, extrusion and injection molding; 2 melt
FDA, USP 39, USP 27
LDPE Chevron Phillips Marlex® KN226* 0.924 density for injection molding, tailored for caps, housewares and personal care products; 25 melt
DMF, FDA, USP 22
LDPE Chevron Phillips Marlex® 1412* 0.924 density for injection molding, tailored for thin wall molding; 35 melt
FDA, USP 22
LDPE Chevron Phillips Marlex® 1007* 0.917 density DMF, FDA, USP 22
MABS INEOS Styrolution Terlux® HD 2822 2 MFI, medical, extrusion, injeciton and blow molding
USP, ISO, FDA Natural/Clear
MABS INEOS Styrolution Terlux® HD 2802* 2 MFI, medical EtO, Gamma/E-Beam, NO2
DMF, USP VI, ISO, FDA Natural/Clear
MABS INEOS Styrolution Terlux® HD 2812 8 MFI, transparent ABS with gloss, high chemical resistance (MTO)
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
MBS INEOS Styrolution Clearblend® 155* Impact modified, styrene acrylic copolymer EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
MBS INEOS Styrolution Zylar® 650* 45 MFI, impact modified, styrene acrylic copolymer
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
MBS INEOS Styrolution Zylar® 550 55 MFI, impact modified, styrene acrylic copolymer
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
*Focus grades
*Focus grades
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
MBS INEOS Styrolution Zylar® 960* 6.5 MFI, PC drop in, lower cost, no Bis A. Chemical resistance data available.
EtO, Gamma/E-Beam DMF, USP VI, ISO, FDA Natural/Clear
PBT BASF Ultradur® B4520 PRO
25 MVR, rigidity, strength, low moisture, injection molding. Chemical resistance data available.
EtO, Gamma/E-Beam DMF, USP VI, ISO, FDA Natural/Opaque
PC Covestro Apec® 1745 High heat, more autoclave cycles EtO, Gamma/E-Beam ISO Natural/Clear
PC Covestro Makrolon® RX 3440
Improved chemical and drug resistance for IV applications
EtO, Gamma/E-Beam, limited steam
USP VI, ISO
PC Covestro Makrolon® RX 2235
37 MVR, high flow for thin wall and intricate features, two tints available
EtO, Gamma/E-Beam, limited steam
USP VI, ISO Clear
PC Covestro Makrolon® 2558* 15 MVR; Global, higher flow EtO, Gamma/E-Beam Natural/Clear
PC Covestro Makrolon® RX 2530*
15 MVR; Gamma stabilized EtO, Gamma/E-Beam, limited steam
ISO Natural/Clear
PC Covestro Makrolon® 2458* 23 MVR; Easy-flow, good hydrolysis resistance EtO, Gamma/E-Beam, limited steam
ISO Natural/Clear
PC Lotte Advanced Materials
ML-1010R 11.5 MFI, standard PC, MTO, import grade EtO, Steam USP VI, ISO, FDA Transparent
PC Lotte Advanced Materials
ML-1020R 22 MFI, standard PC, MTO, import grade EtO, Steam USP VI, ISO, FDA Transparent
PC Lotte Advanced Materials
MR-1005 7.5 MFI, gamma stabilized, chemical resistance data available, MTO, import grade
EtO, Gamma/E-Beam, Steam
USP VI, ISO, FDA Blue tint
PC Lotte Advanced Materials
MR-1015 18 MFI, gamma stabilized, chemical resistance data available, MTO, import grade
EtO, Gamma/E-Beam, Steam
USP VI, ISO, FDA Blue tint
PC Lotte Advanced Materials
MR-1020 23 MFI, gamma stabilized, chemical resistance data available, MTO, import grade
EtO, Gamma/E-Beam, Steam
USP VI, ISO, FDA Blue tint
PC/ABS Covestro Bayblend® M750* Std flow EtO, Gamma/E-Beam, limited steam
ISO Natural/Opaque
PC/ABS Covestro Bayblend® M850 XF*
High flow. Chemical resistance data available. EtO, Gamma/E-Beam, limited steam
ISO Natural/Opaque
PC/ABS FR Covestro Bayblend® M303 FR
FR V=0, superior flow, medical electronics Limited ISO
PC/ABS FR CovestroBayblend® FR 3010*
15 MVR standard grade, global availability. V = 0. EtO, Gamma/E-Beam, limited steam
Natural/Opaque
PC/ABS FR Covestro Bayblend® M301 FR*
Non Hal FR, std flow. Chemical resistance data available.
EtO, Gamma/E-Beam, limited steam
Limited ISO parts 5 & 10 Natural/Opaque
PC/PBT Covestro Makroblend® M 525*
Non FR, improved chemical resistance EtO, Gamma/E-Beam, limited steam
Limited ISO parts 5 & 10 Natural/Opaque
PC/PBT FR Covestro Makroblend® M 4000 FR*
FR, improved chemical resistance, shrinkage. Chemical resistance data available.
EtO, Gamma/E-Beam, limited steam
Natural/Opaque
Visit mholland.com | Call +1 800-872-7370
*Focus grades
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
PC/PET Covestro Makroblend® UT 1018*
FR, improved chemical resistance EtO, Gamma/E-Beam, limited steam
Natural/Opaque
PC/PET FR Covestro Makroblend® EL 700
FR, impact modified, injection molding, good impact strength, chemical resistance
EtO, Gamma/E-Beam, limited steam
Natural/Opaque
PC/PET FR Covestro Makroblend® EL 703
Non-halogenated FR, chemically resistant, not medical grade but often used for medical electronic housings
EtO, Gamma/E-Beam, limited steam
POM BASF Ultraform® S2320 003 PRO
11 MVR, flow, lubricious, chemical resistance, good stiffness, injection molding
EtO DMF, USP VI, ISO, FDA Opaque/White
POM BASF Ultraform® H4320 PRO
2.5 MVR, lubricious, chemical resistance, good stiffness, extrusion grade
EtO DMF, USP VI, ISO, FDA Opaque/White
POM BASF Ultraform® W2320 003 PRO
25 MVR, lubricious, chemical resistance, good stiffness, injection molding
EtO DMF, USP VI, ISO, FDA Opaque/White
POM BASF Ultraform® W2320 003 PRO TR
25 MVR, additional lubricant, chemical resistance, good stiffness, injection molding
EtO DMF, USP VI, ISO, FDA Opaque/White
POM BASF Ultraform® N2320 033 PRO
7.5 MVR, lubricious, chemical resistance, good stiffness, injection molding
EtO DMF, USP VI, ISO, FDA Opaque/White
PP Flint Hills Resources P5L2Z-038 Random copolymer, hot fill, food, health, medical EtO, Autoclave Sterilizable
DMF, FDA, USP Class VI and ISO 10993
Natural
PP Flint Hills Resources 23S1Acs256 Random copolymer, food, health, medical, medical labware
FDA, USP Class VI and DMF
Natural
PP Flint Hills Resources 23S2A Random copolymer, hot fill, health, medical EtO, Autoclave Sterilizable
FDA, USP Class VI and DMF
Natural
PP Flint Hills Resources 13R9A Random copolymer-vials, micro-tubes, centrifuge tubes, caps, bottles
EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Good clarity
PP Flint Hills Resources 11R12A Specialty polymer, caps & closures EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Natural
PP Flint Hills Resources 13T25A Random copolymer, pharma packaging, medical devices, autoclave, clarified
EtO, Autoclave DMF, USP Class VI, ISO, USP 85
Clarified
PP Flint Hills Resources P9M7R-056 Specialty polymer, pipette tips, vials, micro tubes, PCR plates, lids, racks, low warpage
EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Excellent clarity
PP Flint Hills Resources 23R2A Random copolymer-bottles, beakers, flask, carboys
EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Good clarity
PP Flint Hills Resources H0500HN Homopolymer, closures, medical devices EtO, Autoclave DMF, USP Class VI, ISO, USP 85
Natural
PP Flint Hills Resources 23N10A Random copolymer, pharma packaging, SBM, bottles, autoclavable
EtO, Autoclave DMF, USP Class VI, ISO, USP 85
Natural
*Focus grades
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
PP Flint Hills Resources
P4C5N-046 Homopolymer, nucleated, medical device, closures, opthalmic
EtO, Autoclave DMF, USP Class VI, ISO, USP 85
Natural
PP Flint Hills Resources
P5M5R-083 Random copolymer, medical device, labware, radiation stabilized
EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Natural
PP Flint Hills Resources
P5M6K-080 Random copolymer, medical device, labware, radiation stabilized
EtO, Gamma, Autoclave
DMF, USP Class VI, ISO, USP 85
Clarified
PP Flint Hills Resources
23M2A Random copolymer, pharma packaging, BFS, bottles
EtO, Autoclave DMF, USP Class VI, ISO, USP 85
Natural
PP Total 3281 1.3 MFI homopolymer, sheet, blow molding, fiber EtO FDA, USP VI Natural
PP Total 3230 1.6 MFI homopolymer, blow molding EtO FDA, USP VI, DMF Natural
PP Total 6232 2 MFI copolymer, blow molding EtO FDA, USP VI, DMF Natural
PP Total 7238 2 MFI copolymer, blow molding EtO FDA, USP VI, DMF Natural
PP Total 7425 4 MFI copolymer, injection molding EtO FDA, USP VI, DMF Natural
PP Total Z9450 5 MFI copolymer, film EtO FDA, USP VI, DMF Natural
PP Total 8573 7 MFI copolymer, film EtO FDA, USP VI, DMF Natural
PP Total 7622MZ 11 MFI copolymer, clarified, anti-static, injection molding, ISBM
EtO FDA, USP VI, DMF Clarified
PP Total 3620WZ 12 MFI homopolymer, film, sheet blow molding EtO, Gamma/E-Beam FDA, USP VI, DMF Natural
PP Total 3622 12 MFI homopolymer, film, sheet blow molding EtO FDA, USP VI, DMF Natural
PP Total 3727W 20 MFI homopolymer, nucleated, injection molding
EtO FDA, USP VI, DMF Natural
PP Total 3740WR 20 MFI homopolymer, nucleated, radiation stabilized, injection molding
EtO, Gamma/E-Beam FDA Natural
PP Total 3847 MR 45 MFI homopolymer, hydrophobic, radiation stabilized, clarified
EtO, Gamma/E-Beam FDA, USP VI, DMF Clarified
PP Total 3944 MR 60 MFI homopolymer, hydrophobic, radiation stabilized, clarified
EtO, Gamma/E-Beam FDA, USP VI, DMF Transparent, Opaque/ White
PP Total Lumicene® 1251 2 MFL metallocene PP, film, injection molding, blow molding
EtO FDA, USP VI, DMF Natural
PP Total Lumicene® M3382MZ
3.5 MFI metallocene PP, clarified, anti-static thermoforming, blow molding
EtO FDA Clarified
PP Total Lumicene® M3661 14 MFI metallocene PP, injection molding, film, fiber
EtO FDA Natural
PP Total Lumicene® M6823MZ
30 MFI metallocene PP, clarified, anti-static, injection molding, ISBM
EtO FDA, USP VI, DMF Clarified
Visit mholland.com | Call +1 800-872-7370
*Focus grades
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
PPSU BASF Ultrason® E 3010 High viscosity, tough, injection molding, extrusion. Chemical resistance data available.
EtO, Gamma/E-Beam, Autoclave
FDA Natural/Clear
PPSU BASF Ultrason® E 2010 Medium viscosity, injection molding, blown film and extrusion, high heat. Chemical resistance data available.
EtO, Gamma/E-Beam, limited steam
FDA Natural/Clear
PSU BASF Ultrason® S 2010 High heat, good flow. Chemical resistance data available.
EtO, Gamma/E-Beam, limited steam
FDA Natural/Clear
PVC Teknor Apex Apex® 33033RV-NT1
DEHP free, TOTM plasticizer, highest overall performance, shore A 50-90, extrusion grade
USP VI, ISO
PVC Teknor Apex Apex® 32033RV-NT1
DEHP free, TOTM plasticizer, highest overall performance, injection grade
USP VI, ISO
PVC Teknor Apex Apex® 33043RV-NT1
DEHP free, TOTM/DOTP plasticizer, cost effective, shore A 50-90, extrusion grade
USP VI, ISO
PVC Teknor Apex Apex® 32043RV-NT1
DEHP free, TOTM/DOTP plasticizer, cost effective, injection grade
USP VI, ISO
PVC Teknor Apex Apex® 33022RV-NT1
DEHP free, ATBC plasticizer, shore A 50-90, extrusion grade
USP VI, ISO
PVC Teknor Apex Apex® 32022RV-NT1
DEHP free, ATBC plasticizer, injection grade USP VI, ISO
PVC Teknor Apex Apex® 33042RV-NT1
DEHP free, ATBC/DOTP plasticizer, shore A 50-90, extrusion grade
USP VI, ISO
PVC Teknor Apex Apex® 32042RV-NT1
DEHP free, ATBC/DOTP plasticizer, injection grade
USP VI, ISO
PVC Teknor Apex Apex® 35033RV-NT1
DEHP free, TOTM plasticizer, PC/ABS craze resistance, shore A 40-80, extrusion and injection grade
USP VI, ISO
PVC Teknor Apex Apex® 35022RV-NT1
DEHP free, ATBC plasticizer, shore A 40-80, extrusion and injection grade
USP VI, ISO
SAN INEOS Styrolution Luran® HD 20 Rigid, chemically resistant, import grade only EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SAN INEOS Styrolution Lustran® SAN 29 Rigid, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SAN INEOS Styrolution Lustran® SAN 31* 24 MFI, rigid, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SAN INEOS Styrolution Lustran® SAN Sparkle
Rigid, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SBC INEOS Styrolution K-Resin® KR03 7.5 MFI, thermoplastic EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
*Focus grades
ResinsResin Manufacturer Grades Description Sterilization
Regulatory, Drug Master File, USP Class VI, ISO 10993 - FDA Color
SBC INEOS Styrolution K-Resin® KR01 8 MFI, thermoplastic EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SBC INEOS Styrolution Styroflex® 2G66* 14 MFI, extrusion and injection, styrene thermoplastic elastomer (S-TPE)
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SBC INEOS Styrolution Styrolux® 684D* 11 MFI, injection, extrusion and blow molding for labware, disposables and drip chambers
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SBC INEOS Styrolution Styrolux® 3G46 Thermoplastic EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SBC INEOS Styrolution Styrolux® 656C Thermoplastic EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SEBS Elastron Elastron® G Series Available in Shore A 30-90 versions. PP bondable, seals, closures and medical hoses.
EtO, Gamma/E-Beam, limited steam
USP VI, some ISO, USP 88 Natural, Blackand Translucent
SMMA INEOS Styrolution NAS® 90 16 MFI, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SMMA INEOS Styrolution NAS® 21* 24 MFI, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
SMMA INEOS Styrolution NAS® 30 30 MFI, chemically resistant EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT50D (Ether)
Polyether TPU, injection and extrusion standard grade
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT65D (Ether)
Ether TPU, injection and extrusion standard grade
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT76D Injection and extrusion standard grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT85A (Ether)
Injection and extrusion standard grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxS285 (Ester)
Blow film, injection and extrusion grade EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texis RXS292 Shore A 92, Blow film, injection and extrusion grade
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT70A (Ether)
Polyether TPU, injection and extrusion standard grade
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPU Covestro Texin® RxT90A (Ether)
Polyether TPU, injection and extrusion standard grade
EtO, Gamma/E-Beam, NO2
USP VI, ISO Transparent
TPV Elastron Elastron® V Series Shore A 30-90 EtO, Gamma/E-Beam, limited steam
USP VI, some ISO, USP 87 Natural, Black, and Transparent
Visit mholland.com | Call +1 800-872-7370
M. Holland | 400 Skokie Boulevard | Suite 600 | Northbrook, IL 60062 © July 2019
To learn more about what M. Holland can do for you, visit mholland.com or call +1 800-872-7370.