Welcome Presentation in BME 102 runs every 20 minutes starting at 11:00 AM.
All other presentations run continuously throughout the day (11am-2pm).
ROOM PRESENTATION FACULTY/STUDENTS
BME 102
Auditorium
Welcome Slide Presentation
with Questions & Answers
Profs. Noshir Langrana (Chair) and Yannis Androulakis (UG Program
Director)
Meet the Faculty Faculty
BME 115 Molecular/Cellular Bio-Engineering Research Presentations
Prof. Li Cai
and students
BME 117
Microfabrication and Instrumentation
Prof. Jeff Zahn
and students
Biomedical Optics Prof. Mark Pierce
and students
BME 121
Medical Device Demonstrations Prof. Gary Drzewiecki
and students
Senior Design Project Displays Profs. Drzewiecki with Senior Design students
Medical Devices & Bioelectronics Prof. John Li
with Biomedical Instrumentation Lab Students
BME 122 Extended Field-of-View Ultrasound Imaging and Monitoring of Scoliosis
Prof. Ilker Hacihaliloglu
and students
BME 126 BME Seniors
Biomedical Engineering Society (BMES) and Honors Students
BME 128 Graduate Students
BESS (Biomedical Eng. Student Society)
BME 130 Neurorehabilitation Research Prof. William Craelius
with Students
Engineering Building (EN) – C wing
Start time: 10:00am End time: 1:00pm
All presentations run continuously throughout the day.
Location Presentation Description
C-254 Corridor Meet & Greet Meet and converse with faculty and students about the
Chemical and Biochemical Engineering Department
C-254 Corridor Poster Session Observe the displays students have made about their
research and projects
C-217 Instructional Lab Observe the work that senior chemical engineers do in
class, a Wiped Film Evaporator and Two Tank Level
Control experiments.
C-254 C-217 LAB
Tours run every hour and take approximately 45 minutes.
There will be three tours, starting at 10:00 AM, 11:00 AM, and 12:00 PM
Location Description Faculty/Student
Presenters
Table Fair (ASCE
Students)
Talking to visitors about
CEE at Rutgers
ASCE Seniors/Grad
students
CAIT Auditorium Brief Visual Presentation
and Q/A
Dr. Frank Moon and Dr.
Husam Najm
CAIT Auditorium/ Lobby Meet with Faculty and
Seniors
Faculty/Seniors/ASCE
Students
Visualization Lab (CoRE) LiDAR and BIM /
Research/Poster Displays
Dr. Jie Gong/Grad Students
Hydraulic Lab (SOE-A
Wing)
Water Flow Demo
/Research/Poster Displays
Dr. George
(Guo)/Graduate Student
Civil Lab Demo on concrete and
Steel /Poster Displays
Dr. Husam Najm/David
Caronia
Visualization Lab/ CoRE Building
Hydraulics Lab
Civil Lab
CAIT Auditorium/ Lobby
Engineering Quad Lawn
Start time: 11:00am End time: 2:00pm
Please enter through the main entrance of the Electrical Engineering (EE Building) and
start with the video introduction. Then walk through the hallway visiting the poster
presentations and exit on the other side.
Poster Topics
VIDEO Introduction to ECE
IEEE – Institute of Electrical and Electronic Engineers –
Rutgers Student Branch
Research in Software Engineering
Prof. Ivan Marsic
Undergraduate Research:
P2D: Physical to Digital Scanner
Research in Computer Vision/ Biometrics
Prof. Vishal Patel
Undergraduate Research:
Polarized Light for Road Surface Recognition
Research in Signal Processing
Prof. Waheed Bajwa
Undergraduate Research:
AR Enhanced Cooking with Microsoft HoloLens
Research on Brain Imaging
Prof. Laleh Najafizadeh
Undergraduate Research:
Aresty Research Program
Research on Cyber-Physical Systems
Prof. Saman Aliari Zonouz
Research in Privacy
Prof. Janne Lindqvist
Research on Sensor networks, Driverless Cars
Prof. Marco Gruteser
Research in MEMS
Prof. Jaeseok (“J”) Jeon
Research in Computer Vision
Prof. Kristin Dana
EE
Building
Engineering
Quad Lawn
Main Entrance
Tours run every 30 minutes and take approximately 30 minutes.
First tour begins at 10:00 AM. Last tour begins at 12:30 PM. Please
meet in CORE 110.
Room Title/Topic Faculty/Student Presentation
Lobby/Atrium Welcome to ISE! IISE students/brochures
CORE 110 Welcome ISE Video Presentation
with Questions/Answers
Prof. Jim Luxhøj,
ISE Undergraduate Director
CORE 110
Optimization Demos:
- Painting Sequence
- Warehouse Location
- Airline Schedule/Railway
Traffic Flow
Professor Elsayed
Professor Grace Guo
CORE 116
Automation Demos:
- Tennis Ball Collector
- Folding Machine
- Knife Assembly
Professor Elsayed
Professor Grace Guo
CORE 106
Advanced Simulation Lab:
- Smart Cities, Security Game &
Cyber-Physical Demos
Professor Mohsen Jafari
Professor Melike Gursoy
& students
General presentation for MSE will occur every 15 minutes between
10:00am and 12:45pm in the Center for Ceramic Research (CCR) Lobby.
After the presentation, guests will have the opportunity to visit tabletop
demonstrations facilitated by faculty and students of the department.
ROOM PRESENTATION Timeframe
CCR Lobby Overview Presentation of Materials Science and Engineering
10:00 AM- 12:45 PM
CCR Lobby Tabletop Demonstrations 10:00 AM – 1:00 PM
CCR Lobby
Engineering Quad Lawn
Fiber Optics
Tours run every 10 minutes and take approximately 30 minutes.
First tour starts at 11:00am. Last tour starts at 1:30pm. Please meet at D-110.
Location Event Description
D-110 Welcome and Introduction to
Department
Presentation led by Faculty Chair or
Undergraduate Director.
D-123-N MAE Rapid Prototyping Laboratory
(3D Printing)
A lab used to print devices used in
undergraduate projects and faculty research.
D-128 Gas Dynamics Laboratory (Wind
Tunnel)
A Mach 3.5 flow velocity facility.
D-123 Rutgers Formula One Racing Car Every year the Rutgers Formula One Racing
team builds a racing car from scratch for an
international competition.
D-122 Flying Zone
*We request that you kindly turn off
your cell phone when you are in D-
122.*
The lab has a dedicated flying zone about
11.0 FEET X 15.0 FEET X 25.0 FEET
D-117 Programmable Machine Tools Machine tools capable of producing
complicated shapes with the aid of numerical
controlled programming.
D-100 Undergraduate Poster Session Get answers to your Rutgers MAE questions
from members of the community and hear
about the ongoing research being performed
by our current students. Vote on winners for
the Best Undergraduate Poster.
B-120 Faculty and Alumni Panel
Presentations occur every 30 minutes starting at 10:00am and ending at 1:00pm.
Please meet in the CORE Auditorium for the Presentation.
CORE Auditorium Location
Packaging Fun Facts: • Only packaging program
awarding an engineering degree in the United States.
• Only packaging school in a 200-mile radius.
• 48% of packaging students are female.
• 100% graduate employment over the past 10 years.
• 90% of students have completed an internship/co-op opportunity before graduating.
s