1
Software Testing
2
Organization of this Lecture
Introduction to Testing. White-box testing:
statement coverage path coverage branch testing condition coverage Cyclomatic complexity
Summary
3
How do you test a system?
Input test data to the system.
Observe the output: Check if the system behaved as expected.
4
How do you test a system?
5
How do you test a system?If the program does not behave as expected: note the conditions under which it failed.
later debug and correct.
6
Errors and FailuresA failure is a manifestation of an error (aka defect or bug). mere presence of an error may not lead to a failure.
7
Test cases and Test suite
Test a software using a set of carefully designed test cases: the set of all test cases is called the test suite
8
Test cases and Test suite
A test case is a triplet [I,S,O]: I is the data to be input to the system,
S is the state of the system at which the data is input,
O is the expected output from the system.
9
Verification versus ValidationVerification is the process of
determining: whether output of one phase of
development conforms to its previous phase.
Validation is the process of determining whether a fully developed system
conforms to its SRS document.
10
Verification versus Validation
Aim of Verification: phase containment of errors
Aim of validation: final product is error free.
11
Verification versus Validation
Verification: are we doing right?
Validation: have we done right?
12
Design of Test CasesExhaustive testing of any non-
trivial system is impractical: input data domain is extremely large.
Design an optimal test suite: of reasonable size to uncover as many errors as
possible.
13
Design of Test CasesIf test cases are selected randomly:
many test cases do not contribute to the significance of the test suite,
do not detect errors not already detected by other test cases in the suite.
The number of test cases in a randomly selected test suite: not an indication of the effectiveness of
the testing.
14
Design of Test Cases
Testing a system using a large number of randomly selected test cases: does not mean that many errors in
the system will be uncovered.Consider an example:
finding the maximum of two integers x and y.
15
Design of Test Cases
If (x>y) max = x; else max = x;
The code has a simple error:test suite {(x=3,y=2);
(x=2,y=3)} can detect the error, a larger test suite {(x=3,y=2);
(x=4,y=3); (x=5,y=1)} does not detect the error.
16
Design of Test Cases
Systematic approaches are required to design an optimal test suite: each test case in the suite should detect different errors.
17
Design of Test CasesTwo main approaches to design test cases: Black-box approach White-box (or glass-box) approach
18
Black-box TestingTest cases are designed using only
functional specification of the software: without any knowledge of the
internal structure of the software.For this reason, black-box testing
is also known as functional testing.
19
White-box TestingDesigning white-box test cases: requires knowledge about the internal structure of software.
white-box testing is also called structural testing.
20
Black-box Testing
Two main approaches to design black box test cases: Equivalence class partitioning
Boundary value analysis
21
White-Box Testing
There exist several popular white-box testing methodologies: Statement coverage branch coverage path coverage condition coverage mutation testing data flow-based testing
22
Statement CoverageStatement coverage methodology: design test cases so that
every statement in a program is executed at least once.
23
Statement Coverage
The principal idea: unless a statement is executed,
we have no way of knowing if an error exists in that statement.
24
Statement coverage criterion
Based on the observation: an error in a program can not be discovered: unless the part of the program containing the error is executed.
25
Statement coverage criterion
Observing that a statement behaves properly for one input value: no guarantee that it will behave correctly for all input values.
26
Example
int f1(int x, int y){ 1 while (x != y){2 if (x>y) then 3 x=x-y;4 else y=y-x;5 }6 return x; }
27
Euclid's GCD computation algorithm
By choosing the test set {(x=3,y=3),(x=4,y=3), (x=3,y=4)} all statements are executed at least once.
28
Branch Coverage
Test cases are designed such that: different branch conditionsgiven true and false values in turn.
29
Branch Coverage
Branch testing guarantees statement coverage: a stronger testing compared to the statement coverage-based testing.
30
Stronger testingTest cases are a superset of
a weaker testing: discovers at least as many errors as a weaker testing
contains at least as many significant test cases as a weaker test.
31
Example
int f1(int x,int y){ 1 while (x != y){2 if (x>y) then 3 x=x-y;4 else y=y-x;5 }6 return x; }
32
Example
Test cases for branch coverage can be:
{(x=3,y=3),(x=3,y=2), (x=4,y=3), (x=3,y=4)}
33
Condition Coverage
Test cases are designed such that: each component of a composite conditional expression given both true and false values.
34
Example
Consider the conditional expression ((c1.and.c2).or.c3):
Each of c1, c2, and c3 are exercised at least once, i.e. given true and false values.
35
Branch testingBranch testing is the simplest condition testing strategy: compound conditions appearing in different branch statements are given true and false values.
36
Branch testing
Condition testing stronger testing than branch testing:
Branch testing stronger than statement coverage testing.
37
Condition coverage
Consider a boolean expression having n components: for condition coverage we require 2n test cases.
38
Condition coverage
Condition coverage-based testing technique: practical only if n (the number of component conditions) is small.
39
Path Coverage
Design test cases such that: all linearly independent paths in the program are executed at least once.
40
Linearly independent paths
Defined in terms of control flow graph (CFG) of a program.
41
Path coverage-based testing
To understand the path coverage-based testing: we need to learn how to draw control flow graph of a program.
42
Control flow graph (CFG)
A control flow graph (CFG) describes: the sequence in which different instructions of a program get executed.
the way control flows through the program.
43
How to draw Control flow graph?
Number all the statements of a program.
Numbered statements: represent nodes of the control flow graph.
44
How to draw Control flow graph?An edge from one node to another node exists: if execution of the statement representing the first node can result in transfer of control to the other node.
45
Example
int f1(int x,int y){ 1 while (x != y){2 if (x>y) then 3 x=x-y;4 else y=y-x;5 }6 return x; }
46
Example Control Flow Graph
1
2
3 4
5
6
47
How to draw Control flow graph?
Sequence: 1 a=5; 2 b=a*b-1;
1
2
48
How to draw Control flow graph?
Selection: 1 if(a>b) then 2 c=3; 3 else c=5; 4 c=c*c;
1
2 3
4
49
How to draw Control flow graph?
Iteration: 1 while(a>b){ 2 b=b*a; 3 b=b-1;} 4 c=b+d;
1
2
3
4
50
PathA path through a program:
a node and edge sequence from the starting node to a terminal node of the control flow graph.
There may be several terminal nodes for program.
51
Independent path
Any path through the program: introducing at least one new node:that is not included in any other independent paths.
52
Independent path
It is straight forward: to identify linearly independent paths of simple programs.
For complicated programs: it is not so easy to determine the number of independent paths.
53
McCabe's cyclomatic metric
An upper bound: for the number of linearly independent paths of a program
Provides a practical way of determining: the maximum number of linearly independent paths in a program.
54
McCabe's cyclomatic metric
Given a control flow graph G,cyclomatic complexity V(G): V(G)= E-N+2
N is the number of nodes in GE is the number of edges in G
55
Example Control Flow Graph
1
2
3 4
5
6
56
Example
Cyclomatic complexity = 7-6+2 = 3.
57
Cyclomatic complexity
Another way of computing cyclomatic complexity: inspect control flow graph determine number of bounded
areas in the graphV(G) = Total number of bounded
areas + 1
58
Bounded area
Any region enclosed by a nodes and edge sequence.
59
Example Control Flow Graph
1
2
3 4
5
6
60
Example
From a visual examination of the CFG: the number of bounded areas is 2.
cyclomatic complexity = 2+1=3.
61
Cyclomatic complexity
McCabe's metric provides:a quantitative measure of testing difficulty and the ultimate reliability
Intuitively, number of bounded areas increases with the number of decision nodes and loops.
62
Cyclomatic complexity
The first method of computing V(G) is amenable to automation: you can write a program which determines the number of nodes and edges of a graph
applies the formula to find V(G).
63
Cyclomatic complexity
The cyclomatic complexity of a program provides: a lower bound on the number of test cases to be designed
to guarantee coverage of all linearly independent paths.
64
Cyclomatic complexity
Defines the number of independent paths in a program.
Provides a lower bound: for the number of test cases for path coverage.
65
Cyclomatic complexity
Knowing the number of test cases required: does not make it any easier to derive the test cases,
only gives an indication of the minimum number of test cases required.
66
Path testing
The tester proposes: an initial set of test data using his experience and judgement.
67
Path testingA dynamic program analyzer is
used: to indicate which parts of the program have been tested
the output of the dynamic analysis used to guide the tester in selecting additional test cases.
68
Derivation of Test Cases
Let us discuss the steps: to derive path coverage-based test cases of a program.
69
Derivation of Test Cases
Draw control flow graph.Determine V(G).Determine the set of linearly
independent paths.Prepare test cases:
to force execution along each path.
70
Exampleint f1(int x,int y){ 1 while (x != y){2 if (x>y) then 3 x=x-y;4 else y=y-x;5 }6 return x; }
71
Example Control Flow Diagram
1
2
3 4
5
6
72
Derivation of Test Cases
Number of independent paths: 3 1,6 test case (x=1, y=1) 1,2,3,5,1,6 test case(x=1, y=2) 1,2,4,5,1,6 test case(x=2, y=1)
73
An interesting application of cyclomatic complexity
Relationship exists between: McCabe's metric the number of errors existing in the code,
the time required to find and correct the errors.
74
Cyclomatic complexity
Cyclomatic complexity of a program: also indicates the psychological complexity of a program.
difficulty level of understanding the program.
75
Cyclomatic complexity
From maintenance perspective, limit cyclomatic complexity
of modules to some reasonable value. Good software development organizations: restrict cyclomatic complexity of functions to a maximum of ten or so.
76
Summary
Exhaustive testing of non-trivial systems is impractical: we need to design an optimal set of test cases should expose as many errors as possible.
77
Summary
If we select test cases randomly: many of the selected test cases do not add to the significance of the test set.
78
Summary
There are two approaches to testing: black-box testing and white-box testing.
79
Summary
Designing test cases for black box testing: does not require any knowledge of how the functions have been designed and implemented.
Test cases can be designed by examining only SRS document.
80
Summary
White box testing: requires knowledge about internals of the software.
Design and code is required.
81
Summary
We have discussed a few white-box test strategies. Statement coverage branch coverage condition coverage path coverage
82
Summary
A stronger testing strategy: provides more number of significant test cases than a weaker one.
Condition coverage is strongest among strategies we discussed.
83
SummaryWe discussed McCabe’s
Cyclomatic complexity metric: provides an upper bound for linearly independent paths
correlates with understanding, testing, and debugging difficulty of a program.