A Presentation On
Wireless Human Health Monitor
Group MembersAmarendra Kaudagiya Yadav - 30404
Shishir Dhakal - 30407Surendra Basnet - 30412
Health care sensors are playing a vital role in hospitality.
Patient monitoring system, a major improvement in hospitality because of its advanced technology.
A wireless system to measure heartbeat and body temperature.
ABSTRACT
Introduction Existing System Drawbacks Main Objectives Modules Block Diagram Working of system Advantages Conclusion Future Scope
Outlines
A compact sensor, is used to monitor the heartbeat in analog
form .
To check the condition of the patient we required thermometer.
Temperature sensor and heart beat sensor is connected to monitor the patient’s condition.
INTRODUCTION
There are some systems present in the market but all are having
some difficulties
Compact sensor
Digital Heartbeat monitor
EXISTING SYSTEM
The systems are not Portable.
The patient cant able to understand the analog signals.
Complex system and difficult to operate.
DRAWBACKS IN EXISTING SYSTEM
The specialist at a distance can monitor the patient
condition so that he can save the life.
This system is to be available at reasonable prices.
Embedded technology is to be use for monitoring the patient condition easily.
MAIN OBJECTIVE
A GSM based “WIRELESS HUMAN HEALTH
MONITOR” system is used.
Mainly three parts of the system, Heart beat and temperature sensor, transmitter and receiver.
Hear beat sensor is used to measure heart beat rate.
Temperature sensor is used to measure body temperature.
PROPOSED METHOD
The transmitter transmits the heart beat count and
temperature of patient.
Data transmitted Via GSM modem as SMS.
Transmitter is placed near the patient.
Receiver receives the data.
Receiver is placed at the doctor’s side.
An Embedded technology is used here.
Atmel (AT89S52) is used in this system.
SMS used for transmitting data.
MODULES
BLOCK DIAGRAM OF THE SYSTEM
There are mainly two parts of the system one is transmitter
and the other one is the receiver. In the transmitter, We have Heartbeat sensor, and the
temperature sensor. All the sensors are connected to the patient The microcontroller monitors the all the system in the
transmitter if any abnormality in the patient condition then it sends the signal so that the receiver will capture the signal and will work according to that.
WORKING OF THE SYSTEM
ADVANTAGES OF PROPOSED METHOD
Bridging the gap between the doctor and the patients.
Best to be used on rural areas.
It is a multipurpose so that overall conditions are easily measured.
Easy to operate.
Compare with compact sensor it gives better performance.
FUTURE SCOPE
Multiple parameters like Blood pressure, retinal size, age and weight can be included as controlling parameters in the future.
This system also developed by using advanced GSM and GPRS technology in future.
CONCLUSION
Portable and easy to use.
Prevention is better than cure.
Modern technologies have developed that promotes comfortable and better life which is disease free.
THANK YOU
ANY QUERIES?