Download pdf - Y Altoid countersink bit holder · Insert for an Altoids tin to hold a set of countersink bits Hobby & Makers > Tools countersink bitholder altoidstin altoidscontainer altoids Was

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

159.6 KBupdated 6. 4. 2020

Summary

Insert for an Altoids tin to hold a set of countersink bits

Hobby & Makers > Tools

countersink bitholder altoidstin altoidscontainer altoids

Was a bit tight getting this into the tin, but the filament I'm using is a bitinconsistent. You may need to scale this down in the X/Y directions if yourun into trouble (or sand the outside).

Billiam

Altoid countersinkbit holder

VIEW IN BROWSER

updated 6. 4. 2020 | published 6. 4. 2020

insert.stl

3D M

ODEL

ONLY

https://www.prusaprinters.org/social/23599/prints




https://www.prusaprinters.org/prints/28658-altoid-countersink-bit-holder

https://www.prusaprinters.org/prints/28658-altoid-countersink-bit-holder

https://www.prusaprinters.org/prints?categoryId=48

https://www.prusaprinters.org/prints?categoryId=49

#

#

#

#

#

#

#

#

#

#

https://www.prusaprinters.org/prints/28658-altoid-countersink-bit-holder/files










The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

https://www.prusaprinters.org/prints/28658-altoid-countersink-bit-holder/user-gcodes

http://creativecommons.org/licenses/by-sa/4.0/




