Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 1 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BSI Shade chart
Methods of measuring the performance of household electrical appliances -- Methods of measuring the performance of household electrical appliances. Shade chart for the assessment of browning
CPL/59 Confirmed (2012)
Reconfirm
BSI Shade gauge
Methods of measuring the performance of household electrical appliances -- Methods of measuring the performance of household electrical appliances. Shade gauge for the assessment of browning
CPL/59 Confirmed (2012)
Reconfirm
BS 46-3:1951 Keys and keyways and taper pins -- Specification for solid and split taper pins for general engineering purposes
FME/9 Confirmed (2012)
Reconfirm
BS 67:1987 Specification for ceiling roses CPL/34/2 Confirmed (2012)
Reconfirm
BS 84:2007 Parallel screw threads of Whitworth form. Requirements
FME/9 Confirmed (2012)
Reconfirm
BS 122-1:1953 Specification for milling cutters and reamers -- Milling cutters
MTE/18 Confirmed (2012)
Reconfirm
BS 143 and 1256:2000
Threaded pipe fittings in malleable cast iron and cast copper alloy
ISE/110 Confirmed (2012)
Reconfirm
BS 185:Index:1973
Glossary of aeronautical and astronautical terms -- Alphabetical index
ACE/1 Confirmed (2012)
Reconfirm
BS 185-1:1969 Glossary of aeronautical and astronautical terms -- General
ACE/1 Confirmed (2012)
Reconfirm
BS 185-2:1969 Glossary of aeronautical and astronautical terms -- Motion of aircraft
ACE/1 Confirmed (2012)
Reconfirm
BS 185-3:1969 Glossary of aeronautical and astronautical terms -- Structures
ACE/1 Confirmed (2012)
Reconfirm
BS 185-4:1969 Glossary of aeronautical and astronautical terms -- Aerodynamics
ACE/1 Confirmed (2012)
Reconfirm
BS 185-5:1969 Glossary of aeronautical and astronautical terms -- Heavier-than-air aircraft (aerodynes)
ACE/1 Confirmed (2012)
Reconfirm
BS 185-6:1970 Glossary of aeronautical and astronautical terms -- Ballistic and guided missiles
ACE/1 Confirmed (2012)
Reconfirm
BS 185-7:1969 Glossary of aeronautical and astronautical terms -- Lighter-than-air aircraft (aerostats)
ACE/1 Confirmed (2012)
Reconfirm
BS 185-8:1970 Glossary of aeronautical and astronautical terms -- Power plant
ACE/1 Confirmed (2012)
Reconfirm
BS 185-9:1970 Glossary of aeronautical and astronautical terms -- Propellers
ACE/1 Confirmed (2012)
Reconfirm
BS 185-10:1970
Glossary of aeronautical and astronautical terms -- Auxiliary services
ACE/1 Confirmed (2012)
Reconfirm
BS 185-13:1972
Glossary of aeronautical and astronautical terms -- Air-traffic and ground services
ACE/1 Confirmed (2012)
Reconfirm
BS 185-14:1972
Glossary of aeronautical and astronautical terms -- Radiocommunication and radiolocation
ACE/1 Confirmed (2012)
Reconfirm
BS 185-15:1972
Glossary of aeronautical and astronautical terms -- Meteorology
ACE/1 Confirmed (2012)
Reconfirm
BS 185-16:1973
Glossary of aeronautical and astronautical terms -- Personnel
ACE/1 Confirmed (2012)
Reconfirm
BS 185-17:1973
Glossary of aeronautical and astronautical terms -- Aerospace medicine
ACE/1 Confirmed (2012)
Reconfirm
BS 185-18:1970
Glossary of aeronautical and astronautical terms -- Astronautics
ACE/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 2 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 188:1977 Methods for determination of the viscosity of liquids PTI/13 Confirmed (2012)
Reconfirm
BS 302-5:1987 Stranded steel wire ropes -- Specification for ropes for hauling purposes
MHE/2 Confirmed (2012)
Withdraw
BS 325:1947 Specification for black cup and countersunk bolts and nuts
FME/9 Confirmed (2012)
Reconfirm
BS 341-3:2002 Transportable gas container valves -- Valve outlet connections
PVE/3/1 Confirmed (2012)
Reconfirm
BS 376-1:2012 Railway signalling symbols -- Specification for schematic symbols
GEL/9/1 Current Reconfirm
BS 405:1987 Specification for uncoated expanded metal carbon steel sheets for general purposes
ISE/104 Confirmed (2012)
Reconfirm
BS 417-2:1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders -- Metric units
B/504 Confirmed (2012)
Reconfirm
BS 419:1966 Specification for varnished fabrics and tapes for electrical purposes
GEL/15/7 Confirmed (2012)
Reconfirm
BS 426:1969 Specification for fixed centres for use on machine tools and in other applications
MTE/1 Confirmed (2012)
Reconfirm
BS 434-2:2006 Bitumen road emulsions -- Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
B/510/2 Confirmed (2012)
Reconfirm
BS 450:1958 Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
FME/9 Confirmed (2012)
Reconfirm
BS 463-1:1958 Specification for sockets for wire ropes -- Inch units MHE/2 Confirmed (2012)
Reconfirm
BS 463-2:1970 Specification for sockets for wire ropes -- Metric units MHE/2 Confirmed (2012)
Withdraw
BS 469:1995 Specification for railway signalling lamps CPL/34/1 Confirmed (2012)
Reconfirm
BS 470:1984 Specification for inspection, access and entry openings for pressure vessels
PVE/1 Confirmed (2012)
Reconfirm
BS 476-4:1970 Fire tests on building materials and structures -- Non-combustibility test for materials
FSH/21 Confirmed (2012)
Reconfirm
BS 476-11:1982
Fire tests on building materials and structures -- Method for assessing the heat emission from building materials
FSH/21 Confirmed (2012)
Reconfirm
BS 476-12:1991
Fire tests on building materials and structures -- Method of test for ignitability of products by direct flame impingement
FSH/21 Confirmed (2012)
Reconfirm
BS 476-20:1987
Fire tests on building materials and structures -- Method for determination of the fire resistance of elements of construction (general principles)
FSH/22 Confirmed (2012)
Reconfirm
BS 476-22:1987
Fire tests on building materials and structures -- Method for determination of the fire resistance of non-loadbearing elements of construction
FSH/22 Confirmed (2012)
Reconfirm
BS 476-32:1989
Fire tests on building materials and structures -- Guide to full scale fire tests within buildings
FSH/21 Confirmed (2012)
Reconfirm
BS 489:1999 Specification for turbine lubricants PTI/7 Confirmed (2012)
Reconfirm
BS 499-2C:1999
Welding terms and symbols -- European arc welding symbols in chart form
WEE/1 Confirmed (2012)
Reconfirm
BS 500:2000 Steel sleepers RAE/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 3 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 546:1950 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors
PEL/23 Confirmed (2012)
Reconfirm
BS 546:Supplement No. 1:1960
Specification for plugs made of resilient material PEL/23 Confirmed (2012)
Reconfirm
BS 593:1989 Specification for laboratory thermometers LBI/1/2 Confirmed (2012)
Reconfirm
BS 615:1953 Specification for Kohlrausch flasks LBI/1/2 Confirmed (2012)
Reconfirm
BS 633:1970 Specification for cotton selvedge tapes and webbing for electrical purposes
GEL/15/7 Confirmed (2012)
Reconfirm
BS 643:1970 Specification for white metal ingots for capping steel wire ropes
NFE/27 Confirmed (2012)
Reconfirm
BS 644:2012 Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
B/538/1 Current Confirm
BS 658:1989 Specification for apparatus for the determination of distillation range (including flasks and receivers)
LBI/1/2 Confirmed (2012)
Reconfirm
BS 675:1953 Specification for sugar flasks LBI/1/2 Confirmed (2012)
Reconfirm
BS 676:1982 Specification for flasks with graduated necks (phenols type)
LBI/1/2 Confirmed (2012)
Reconfirm
BS 692:1990 Specification for meteorological thermometers LBI/1/2 Confirmed (2012)
Reconfirm
BS 701:1953 Specification for brewers' mash flask LBI/1/2 Confirmed (2012)
Reconfirm
BS 714:1950 Specification. Cartridge fuse-links for use in railway-signalling circuits
PEL/32 Confirmed (2012)
Reconfirm
BS 718:1991 Specification for density hydrometers LBI/1/2 Confirmed (2012)
Reconfirm
BS 733-2:1987 Pyknometers -- Methods for calibration and use of pyknometers
LBI/1/2 Confirmed (2012)
Reconfirm
BS 749:1969 Specification for underfeed stokers RHE/22 Confirmed (2012)
Reconfirm
BS 750:2012 Specification for underground fire hydrants and surface box frames and covers
FSH/17/8 Current Confirm
BS 753:1987 Schedule for density-composition tables for aqueous solutions of sulphuric acid
LBI/1/2 Confirmed (2012)
Reconfirm
BS 756:1952 Specification for Dean and Stark apparatus LBI/1/2 Confirmed (2012)
Reconfirm
BS 764:1990 Specification for automatic change-over contactors for emergency lighting systems
PEL/17 Confirmed (2012)
Reconfirm
BS 768:1958 Specification for slotted grub screws FME/9 Confirmed (2012)
Reconfirm
BS 778:1966 Specification for steel pipes and joints for hydraulic purposes
MCE/18 Confirmed (2012)
Reconfirm
BS 791:1990 Specification for solid-stem calorimeter thermometers LBI/1/2 Confirmed (2012)
Reconfirm
BS 807:1955 Specification for spot welding electrodes WEE/29 Confirmed (2012)
Reconfirm
BS 852:1939 Specification for toolmakers' straightedges TDW/4 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 4 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 855:1990 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
RHE/10 Confirmed (2012)
Reconfirm
BS 856:1969 Specification for wing nuts FME/9 Confirmed (2012)
Reconfirm
BS 857:1967 Specification for safety glass for land transport AUE/1 Confirmed (2012)
Reconfirm
BS 869:1978 Specification for toolmakers' flats and high precision surface plates
TDW/4 Confirmed (2012)
Reconfirm
BS 903-0:2012 Physical testing of rubber -- General PRI/22 Current Confirm
BS 906-1:1972 Specification for engineers' parallels -- Metric units TDW/4 Confirmed (2012)
Reconfirm
BS 906-2:1972 Specification for engineers' parallels. -- Imperial units TDW/4 Confirmed (2012)
Reconfirm
BS 919-1:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of unified form
FME/9 Confirmed (2012)
Reconfirm
BS 919-2:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of Whitworth and B.A. forms
FME/9 Confirmed (2012)
Reconfirm
BS 919-3:2007 Screw gauge limits and tolerances -- Specification for gauges for screw threads of ISO metric form
FME/9 Confirmed (2012)
Reconfirm
BS 919-4:2007 Screw gauge limits and tolerances -- Limits of size for gauges for screw threads of unified form diameters 1/4 in and larger
FME/9 Confirmed (2012)
Reconfirm
BS 939:2007 Engineers' squares (including cylindrical and block squares). Specification
MTE/1 Confirmed (2012)
Reconfirm
BS 946:1970 Method for the designation of yarns TCI/24 Confirmed (2012)
Reconfirm
BS 950-1:1967 Specification for artificial daylight for the assessment of colour -- Illuminant for colour matching and colour appraisal
CPL/34 Confirmed (2012)
Reconfirm
BS 958:1968 Specification for spirit levels for use in precision engineering
TDW/4 Confirmed (2012)
Reconfirm
BS 975:1987 Schedule for density-composition tables for aqueous solutions of nitric acid
LBI/1/2 Confirmed (2012)
Reconfirm
BS 976:1987 Schedule for density-composition tables for aqueous solutions of hydrochloric acid
LBI/1/2 Confirmed (2012)
Reconfirm
BS 1016-1:1973
Methods for analysis and testing of coal and coke -- Total moisture of coal
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-10:1977
Methods for analysis and testing of coal and coke -- Arsenic in coal and coke
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-14:1963
Methods for analysis and testing of coal and coke -- Analysis of coal ash and coke ash
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-100:1994
Methods for analysis and testing of coal and coke -- General introduction and methods for reporting results
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-107.3:1990
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal -- Determination of swelling properties using a dilatometer
PTI/16 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 5 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 1016-107.2:1991
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal -- Assessment of caking power by Gray-King coke test
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-108.2:1992
Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of Micum and Irsid indices
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-108.5:1992
Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of density and porosity
PTI/16 Confirmed (2012)
Reconfirm
BS 1016-108.6:1992
Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of critical air blast value
PTI/16 Confirmed (2012)
Reconfirm
BS 1041-2.1:1985
Code for temperature measurement. Expansion thermometers -- Guide to selection and use of liquid-in-glass thermometers
LBI/1/2 Confirmed (2012)
Reconfirm
BS 1041-2.2:1989
Code for temperature measurement. Expansion thermometers -- Guide to selection and use of dial-type expansion thermometers
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1041-3:1989
Temperature measurement -- Guide to selection and use of industrial resistance thermometers
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1041-4:1992
Temperature measurement -- Guide to the selection and use of thermocouples
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1041-5:1989
Temperature measurement -- Guide to selection and use of radiation pyrometers
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1041-7:1988
Temperature measurement -- Guide to selection and use of temperature/time indicators
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1050:1984 Specification for indicator lamps for use in telecommunication apparatus and for allied purposes
CPL/34/1 Confirmed (2012)
Reconfirm
BS 1083:1965 Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
FME/9 Confirmed (2012)
Reconfirm
BS 1089:1973 Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types
MTE/1 Confirmed (2012)
Reconfirm
BS 1098-2:1977
Specification for jig bushes -- Metric units MTE/18 Confirmed (2012)
Reconfirm
BS 1104:1957 Specification for general purpose Acme screw threads
FME/9 Confirmed (2012)
Reconfirm
BS 1123:2006 Fusible plugs for steam boilers and compressed air applications. Specification
PSE/18/6 Confirmed (2012)
Reconfirm
BS 1125:1987 Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)
B/503 Confirmed (2012)
Reconfirm
BS 1133-7.6:1988
Packaging code. Paper and board wrappers, bags and containers -- Moulded pulp packaging
PKW/0/-/9 Confirmed (2012)
Reconfirm
BS 1133-10.1:1990
Packaging code. Metal containers -- Tins and cans PKW/0/-/8 Confirmed (2012)
Reconfirm
BS 1133-15:1991
Packaging code -- Tensional strapping PKW/0 Confirmed (2012)
Reconfirm
BS 1133-19:1986
Packaging code -- Use of desiccants in packaging PKW/0 Confirmed (2012)
Reconfirm
BS 1133-21:1991
Packaging code -- Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
PKW/0 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 6 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 1133-22:1989
Packaging code -- Packaging in plastics containers PKW/0/-/10 Confirmed (2012)
Reconfirm
BS 1140:1993 Specification for resistance spot welding of uncoated and coated low carbon steel
WEE/29 Confirmed (2012)
Reconfirm
BS 1153:1992 Recommendations for processing and storage of silver-gelatine-type microfilm
IDT/1 Confirmed (2012)
Reconfirm
BS 1157:1975 Recommendations for tapping drill sizes for use with fluted taps
FME/9 Confirmed (2012)
Reconfirm
BS 1161:1977 Specification for aluminium alloy sections for structural purposes
B/525/9 Confirmed (2012)
Reconfirm
BS 1188:1974 Specification for ceramic wash basins and pedestals B/503 Confirmed (2012)
Reconfirm
BS 1203:2001 Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method
PRI/52 Confirmed (2012)
Reconfirm
BS 1206:1974 Specification for fireclay sinks: dimensions and workmanship
B/503 Confirmed (2012)
Reconfirm
BS 1245:2012 Pedestrian doorsets and door frames made from steel sheet. Specification
B/538/1 Current Confirm
BS 1254:1981 Specification for WC seats (plastics) B/503 Confirmed (2012)
Reconfirm
BS 1296-1:1970
Specification for single point cutting tools -- Shank sections
MTE/18 Confirmed (2012)
Reconfirm
BS 1296-2:1972
Specification for single point cutting tools -- Nomenclature
MTE/18 Confirmed (2012)
Reconfirm
BS 1296-3:1978
Specification for single point cutting tools -- Butt-welded cutting tools and blanks
MTE/18 Confirmed (2012)
Reconfirm
BS 1296-4:1978
Specification for single point cutting tools -- Ground high speed steel tool bits
MTE/18 Confirmed (2012)
Reconfirm
BS 1306:1975 Specification for copper and copper alloy pressure piping systems
PVE/10 Confirmed (2012)
Reconfirm
BS 1344-1:1994
Methods of testing vitreous enamel finishes -- Determination of resistance to thermal shock of coatings on articles other than cooking utensils and fabricated sheet steel components
STI/36 Confirmed (2012)
Reconfirm
BS 1344-22:1994
Methods of testing vitreous enamel finishes -- Determination of resistance to thermal shock of coatings for fabricated sheet steel components such as burners and pan supports for cookers
STI/36 Confirmed (2012)
Reconfirm
BS 1362:1973 Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs)
PEL/32 Confirmed (2012)
Reconfirm
BS 1365:1990 Specification for short-range short-stem thermometers
LBI/1/2 Confirmed (2012)
Reconfirm
BS 1413:1989 Specification for page size for books PAI/43 Confirmed (2012)
Reconfirm
BS 1428-B2:1960
Microchemical analysis. Apparatus for the determination of elements by other than combustion methods -- Specification for ammonia distillation apparatus (Markham)
LBI/1/2 Confirmed (2012)
Reconfirm
BS 1428-D5:1955
Microchemical apparatus. Volumetric analysis -- Specification for syringe pattern micro-pipette
LBI/1/2 Confirmed (2012)
Reconfirm
BS 1435-2:2005
Rubber hose assemblies for oil suction and discharge services -- Recommendations for storage, testing and use
PRI/66 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 7 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 1446:1973 Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways
B/510 Confirmed (2012)
Reconfirm
BS 1564:1975 Specification for pressed steel sectional rectangular tanks
PVE/20 Confirmed (2012)
Reconfirm
BS 1566-2:1984
Copper indirect cylinders for domestic purposes -- Specification for single feed indirect cylinders
B/504 Confirmed (2012)
Reconfirm
BS 1574:1994 Specification for split pins (inch series) FME/9 Confirmed (2012)
Reconfirm
BS 1580-1:2007
Unified screw threads -- Screw threads with diameters $9D in and larger. Requirements
FME/9 Confirmed (2012)
Reconfirm
BS 1580-3:2007
Unified screw threads -- Screw threads with diameters below $9D in. Requirements
FME/9 Confirmed (2012)
Reconfirm
BS 1591:1975 Specification for corrosion resisting high silicon iron castings
ISE/111 Confirmed (2012)
Reconfirm
BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
ISE/110 Confirmed (2012)
Reconfirm
BS 1622:1989 Specification for spreaders for winter maintenance B/513 Confirmed (2012)
Reconfirm
BS 1646-4:1984
Symbolic representation for process measurement control functions and instrumentation -- Specification for basic symbols for process computer, interface and shared display/control functions
TDW/4 Confirmed (2012)
Reconfirm
BS 1647-1:1984
pH measurement -- Specification for pH scale LBI/16 Confirmed (2012)
Reconfirm
BS 1647-2:1984
pH measurement -- Specification for reference value standard solutions and operational reference standard solutions
LBI/16 Confirmed (2012)
Reconfirm
BS 1655:1950 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1657:1950 Specification for buttress threads FME/9 Confirmed (2012)
Reconfirm
BS 1660-11:1991
Machine tapers -- Specification for gauges MTE/1 Confirmed (2012)
Reconfirm
BS 1676:1970 Specification for heaters for tar and bitumen (mobile and transportable)
B/513 Confirmed (2012)
Reconfirm
BS 1679-5:1973
Containers for pharmaceutical dispensing -- Eye dropper bottles
PKW/0 Confirmed (2012)
Reconfirm
BS 1679-6:1994
Containers for pharmaceutical dispensing -- Specification for glass medicine bottles
PKW/0/-/7 Confirmed (2012)
Reconfirm
BS 1679-7:1968
Specification for containers for pharmaceutical dispensing -- Ribbed oval glass bottles
PKW/0/-/7 Confirmed (2012)
Reconfirm
BS 1679-8:1992
Containers for pharmaceutical dispensing -- Specification for glass and plastics containers for solid dosage forms, semi-solids and powders
PKW/0 Confirmed (2012)
Reconfirm
BS 1683:1987 Specification for coated aluminium foil for wrapping processed cheese
PKW/0/-/8 Confirmed (2012)
Reconfirm
BS 1692:1998 Specification for gin blocks MHE/3/-/6 Confirmed (2012)
Reconfirm
BS 1694:1990 Specification for hospital ward cots for children CH/100 Confirmed (2012)
Reconfirm
BS 1702:1950 Specification for mild steel drums (heavy duty - fixed ends)
PKW/0/-/4 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 8 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 1707:1989 Specification for hot binder distributors for road surface dressing
B/510/2 Confirmed (2012)
Reconfirm
BS 1722-4:1986
Fences -- Specification for cleft chestnut pale fences B/201 Current Confirm
BS 1734:1951 Specification for micrometer heads TDW/4 Confirmed (2012)
Reconfirm
BS 1747-5:1972
Methods for the measurement of air pollution -- Directional dust gauges
EH/2 Current Confirm
BS 1748:Parts 11 and 12:1964
Methods for the analysis of copper alloys -- Methods for the determination of copper and lead in leaded bronze alloys
NFE/34 Confirmed (2012)
Reconfirm
BS 1748:Parts 1-5:1961
Methods for the analysis of copper alloys -- Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys
NFE/34 Confirmed (2012)
Reconfirm
BS 1748-6:1960
Methods for the analysis of copper alloys -- Method for the determination of tin in copper alloys (nickel coil reduction method)
NFE/34 Confirmed (2012)
Reconfirm
BS 1748-7:1960
Methods for the analysis of copper alloys -- Method for the determination of silicon in copper alloys (photometric method)
NFE/34 Confirmed (2012)
Reconfirm
BS 1748-8:1960
Methods for the analysis of copper alloys -- Method for the determination of phosphorus in copper alloys (photometric method)
NFE/34 Confirmed (2012)
Reconfirm
BS 1748-9:1963
Methods for the analysis of copper alloys -- Method for the determination of zinc in copper alloys
NFE/34 Confirmed (2012)
Reconfirm
BS 1759:1969 Specification for knurling wheels MTE/18 Confirmed (2012)
Reconfirm
BS 1765-1:1990
Hospital bedside lockers. -- Specification for general purpose bedside lockers for patients
CH/100 Confirmed (2012)
Reconfirm
BS 1765-2:1976
Specification for hospital bedside lockers -- General purpose lockers of wooden construction with facilities for hanging day clothes
CH/100 Confirmed (2012)
Reconfirm
BS 1771-1:1989
Fabrics for uniforms and workwear -- Specification for fabrics of wool and wool blends
TCI/66 Confirmed (2012)
Reconfirm
BS 1771-2:1990
Fabrics for uniforms and workwear -- Specification for fabrics from cellulosic fibres, synthetic fibres and blends
TCI/66 Confirmed (2012)
Reconfirm
BS 1794:1952 Specification for chart ranges for temperature recording instruments
GEL/65/2 Confirmed (2012)
Reconfirm
BS 1804-1:1966
Specification for parallel steel dowel pins -- Inch series
FME/9 Confirmed (2012)
Reconfirm
BS 1804-2:1968
Specification for parallel steel dowel pins -- Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 1804-3:1973
Specification for parallel steel dowel pins -- Parallel and taper types having screw threads for extraction purposes. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 1858:2002 Electric cables. Accessories. Bitumen-based filling compounds
GEL/20/11 Confirmed (2012)
Reconfirm
BS 1868:1975+A1:1990
Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
PSE/18/2 Confirmed (2012)
Reconfirm
BS 1876:1990 Specification for automatic flushing cisterns for urinals
B/503 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 9 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 1877-8:1974
Domestic bedding -- Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)
TCI/66 Confirmed (2012)
Reconfirm
BS 1877-10:2011+A1:2012
Domestic bedding -- Specification for mattresses and bumpers for children’s cots, perambulators and similar domestic articles
CW/1 Current Confirm
BS 1881-131:1998
Testing concrete -- Methods for testing cement in a reference concrete
B/517/1 Current Confirm
BS 1895:1973 Specification for metal-framed wheeled screens for use in hospitals
CH/100 Confirmed (2012)
Reconfirm
BS 1900:1976 Specification for secondary reference thermometers LBI/1/2 Confirmed (2012)
Reconfirm
BS 1932-2:1989
Testing the strength of yarns and threads from packages -- Methods for determination of knot strength and loop strength
TCI/24 Confirmed (2012)
Reconfirm
BS 1935:1972 Specification for spindle noses and adjustable adaptors for multi-spindle heads
MTE/1 Confirmed (2012)
Reconfirm
BS 1936-1:1952
Undercuts and runouts for screw threads -- Inch screw threads
FME/9 Confirmed (2012)
Reconfirm
BS 1936-2:1991
Undercuts and runouts for screw threads -- Specification for ISO metric screw threads
FME/9 Confirmed (2012)
Reconfirm
BS 1968:1953 Specification for floats for ballvalves (copper) B/504 Confirmed (2012)
Reconfirm
BS 1970:2012 Hot water bottles manufactured from rubber and PVC. Specification
PRI/68 Current Reconfirm
BS 1979:1985 Specification for hospital ward bedsteads for psychiatric hospitals
CH/100 Confirmed (2012)
Reconfirm
BS 1981:1991 Specification for unified machine screws and machine screw nuts
FME/9 Confirmed (2012)
Reconfirm
BS 1983-3:1987
Chucks for machine tools and portable power tools -- Specification for dimensions of collet pads for base jaws of power operated workholding chucks
MTE/1 Confirmed (2012)
Reconfirm
BS 1983-4:1987
Chucks for machine tools and portable power tools -- Specification of criteria to be stated affecting performance of power operated workholding chucks at speed
MTE/1 Confirmed (2012)
Reconfirm
BS 1983-5:1989
Chucks for machine tools and portable power tools -- Code of practice for the safe operation of workholding chucks used on lathes
MTE/1 Confirmed (2012)
Reconfirm
BS 2000-129:2003
Methods of test for petroleum and its products -- Determination of bromine number. Colour indicator titration method
PTI/13 Confirmed (2012)
Reconfirm
BS 2000-138:2002
Methods of test for petroleum and its products -- Determination of oxidation stability of aviation fuel. Potential residue method
PTI/13 Confirmed (2012)
Reconfirm
BS 2000-143:2004
Methods of test for petroleum and its products -- Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
PTI/13 Confirmed (2012)
Reconfirm
BS 2000-182:2006
Methods of test for petroleum and its products -- Determination of inorganic acidity of petroleum products. Colour indicator titration method
PTI/13 Confirmed (2012)
Reconfirm
BS 2000-284:2004
Methods of test for petroleum and its products -- Determination of unsaponifiable and saponifiable matter in oils, fats and waxes
PTI/13 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 10 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 2003:1974 Specification for mild steel drums (light duty: removable heads)
PKW/0/-/4 Confirmed (2012); Partially replaced by BS 2003-1:1987
Confirm
BS 2043:1968 Method for the determination of wool fibre fineness by the use of a projection microscope
TCI/24 Confirmed (2012)
Withdraw
BS 2059:1953 Specification for straight-sided splines and serrations MCE/5 Confirmed (2012)
Reconfirm
BS 2059/1:1957
Summary sheet: straight sided splines. Bottom fitting. Shallow
MCE/5 Confirmed (2012)
Reconfirm
BS 2059/2:1957
Summary sheet: straight sided splines. Bottom fitting. Deep
MCE/5 Confirmed (2012)
Reconfirm
BS 2059/3:1957
Summary sheet: straight sided serrations. Internal and external
MCE/5 Confirmed (2012)
Reconfirm
BS 2061:1953 Specification for phosphor bronze spring washers for general engineering purposes
FME/9 Confirmed (2012)
Reconfirm
BS 2069:1954 Specification for gas sampling tubes LBI/1/2 Confirmed (2012)
Reconfirm
BS 2071:1989 Specification for Soxhlet extractors LBI/1/2 Confirmed (2012)
Reconfirm
BS 2096:1954 Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant
B/513 Confirmed (2012)
Reconfirm
BS 2099:1989 Specification for castors for hospital equipment CH/100 Confirmed (2012)
Reconfirm
BS 2456:1990 Specification for floats (plastics) for float operated valves for cold water services
B/504/-/8 Confirmed (2012)
Reconfirm
BS 2470:1973 Specification for hexagon socket screws and wrench keys. Inch series
FME/9 Confirmed (2012)
Reconfirm
BS 2485:1987 Specification for tee slots, tee bolts, tee nuts and tenons
MTE/1 Confirmed (2012)
Reconfirm
BS 2501:1992 Specification for commercial refrigerated storage cabinets of the closed reach-in type
RHE/19 Confirmed (2012)
Reconfirm
BS 2502:1979 Specification for manufacture of sectional cold rooms (walk-in type)
RHE/19 Confirmed (2012)
Reconfirm
BS 2548:1986 Specification for wood wool for general packaging purposes
PKW/0/-/11 Confirmed (2012)
Reconfirm
BS 2562:1979 Specification for cable boxes for transformers and reactors
PEL/14 Confirmed (2012)
Reconfirm
BS 2567:1997 Specification for non-powered roller conveyors MHE/9 Confirmed (2012)
Reconfirm
BS 2586:1979 Specification for glass and reference electrodes for the measurement of pH
LBI/16 Confirmed (2012)
Reconfirm
BS 2610:1978 Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres
TCI/80 Confirmed (2012)
Reconfirm
BS 2626:1992 Specification for lubricants for refrigerant compressors
PTI/7 Confirmed (2012)
Reconfirm
BS 2690-15:1974
Methods of testing water used in industry -- Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
EH/3 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 11 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 2690-102:1979
Methods of testing water used in industry -- Hydrazine: spectrophotometric method (4-dimethylaminobenzaldehyde)
EH/3 Confirmed (2012)
Reconfirm
BS 2690-104:1983
Methods of testing water used in industry -- Silica: reactive, total and suspended
EH/3 Confirmed (2012)
Reconfirm
BS 2690-115:1983
Methods of testing water used in industry -- Cyclohexylamine: spectrophotometric method
EH/3 Confirmed (2012)
Reconfirm
BS 2690-116:1983
Methods of testing water used in industry -- Morpholine: spectrophotometric method
EH/3 Confirmed (2012)
Reconfirm
BS 2690-117:1983
Methods of testing water used in industry -- Long-chain fatty amines: spectrophotometric method
EH/3 Confirmed (2012)
Reconfirm
BS 2692-2:1956
Fuses for voltages exceeding 1000 V a.c. -- Expulsion fuses
PEL/32 Confirmed (2012)
Reconfirm
BS 2718:1979 Specification for gas cylinder trolleys CH/100 Confirmed (2012)
Reconfirm
BS 2751:2001 General purpose acrylonitrile-butadiene rubber compounds. Specification
PRI/54 Confirmed (2012)
Reconfirm
BS 2765:1969 Specification for dimensions of temperature detecting elements and corresponding pockets
GEL/65/2 Confirmed (2012)
Reconfirm
BS 2769-1:1984
Hand-held electric motor-operated tools -- Specification for general requirements
CPL/116 Confirmed (2012)
Reconfirm
BS 2769-2.0:1984
Hand-held electric motor-operated tools. Particular requirements -- General introduction and list of Sections
CPL/116 Confirmed (2012)
Reconfirm
BS 2772-3:1987
Colliery haulage and winding equipment -- Specification for 1.5% manganese steel castings
ISE/111 Confirmed (2012)
Reconfirm
BS 2775:1987 Specification for rubber stoppers and tubing for general laboratory use
PRI/73 Confirmed (2012)
Reconfirm
BS 2782-1:Methods 131C and 131D:1978
Methods of testing plastics. Thermal properties -- Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings
PRI/42 Confirmed (2012)
Reconfirm
BS 2782-4:Method 432D:1995
Methods of testing plastics. Chemical properties -- Determination of styrene evaporation from unsaturated polyester resins
PRI/42 Confirmed (2012)
Reconfirm
BS 2782-4:Method 434D:1975
Methods of testing plastics. Chemical properties -- Determination of antioxidants in polyolefin compounds by a spectrophotometric method
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-4:Method 452B:1993
Methods of testing plastics. Chemical properties -- Determination of carbon black content of polyolefin compound
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-4:Methods 451F to 451J:1978
Methods of testing plastics. Chemical properties -- Determination of formaldehyde in phenolic mouldings (colorimetric method). Determination of formaldehyde in phenolic mouldings (gravimetric method). Determination of sulphates in phenolic mouldings. Determination of chlorides in phenolic mouldings
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-4:Methods 452D to 452F:1978
Methods of testing plastics. Chemical properties -- Determination of pH of water extract of polyolefin compound. Determination of water-soluble sulphates in polyolefin compound. Determination of water-soluble chlorides in polyolefin compound
PRI/21 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 12 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 2782-5:Method 520A:1992
Methods of testing plastics. Optical and colour properties, weathering -- Determination of specular gloss
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-5:Method 521A:1992
Methods of testing plastics. Optical and colour properties, weathering -- Determination of haze of film and sheet
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-6:Method 641A:1983
Methods of testing plastics. Dimensional properties -- Determination of dimensional stability at 100$0DC of flexible polyvinyl chloride sheet
PRI/75 Confirmed (2012)
Reconfirm
BS 2782-7:Method 721A:1988
Methods of testing plastics. Rheological properties -- Determination of resin flow from resin impregnated glass fabric
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-8:Method 822A:1992
Methods of testing plastics. Other properties -- Determination of water vapour transmission rate of plastics films (sachet method)
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-8:Method 835A:1980
Methods of testing plastics. Other properties -- Determination of gelation time of phenolic resins
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-8:Method 835B:1980
Methods of testing plastics. Other properties -- Determination of gelation time of polyester resins (manual method)
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-8:Method 835D:1980
Methods of testing plastics. Other properties -- Determination of gelation time of thermosetting resins using a hot plate
PRI/21 Confirmed (2012)
Reconfirm
BS 2782-8:Methods 823A and 823B:1978
Methods of testing plastics. Other properties -- Methods for the assessment of carbon black dispersion in polyethylene using a microscope
PRI/21 Confirmed (2012)
Reconfirm
BS 2827:1957 Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
FME/9 Confirmed (2012)
Reconfirm
BS 2837:1988 Specification for steel links and strap assemblies for lifting attachments for packing cases
PKW/0 Confirmed (2012)
Reconfirm
BS 2838-1:1988
Examination and general treatment couches. -- Specification for fixed height couches
CH/100 Confirmed (2012)
Reconfirm
BS 2838-2:1991
Examination and general treatment couches -- Specification for variable height couches
CH/100 Confirmed (2012)
Reconfirm
BS 2842:1992 Specification for whirling hygrometer LBI/1/2 Confirmed (2012)
Reconfirm
BS 2856:1973 Precise conversion of inch and metric sizes on engineering drawings
TDW/4 Confirmed (2012)
Reconfirm
BS 2879:1980 Specification for draining taps (screw-down pattern) B/504 Confirmed (2012)
Reconfirm
BS 2881:1989 Specification for cupboards for the storage of medicines in health care premises
CH/100 Confirmed (2012)
Reconfirm
BS 2889:1967 Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser
TCI/24 Confirmed (2012)
Reconfirm
BS 2891:1992 Specification for operating table mattresses and mattress sections
CH/100 Confirmed (2012)
Reconfirm
BS 2893:1989 Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts)
CH/216 Confirmed (2012)
Reconfirm
BS 2955:1993 Glossary of terms relating to particle technology LBI/37 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 13 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 2987:1958 Notes on the application of statistics to paper testing PAI/11 Confirmed (2012)
Reconfirm
BS 3036:1958 Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)
PEL/32 Confirmed (2012)
Reconfirm
BS 3037-1:1958
Specification for tyres for crane rail wheels -- Double-flanged parallel-tread tyres
MHE/3 Confirmed (2012)
Reconfirm
BS 3037-2:1975
Specification for tyres for crane rail wheels -- Forged or rolled steel double flanged rail wheels and tyres (metric units)
MHE/3 Confirmed (2012)
Reconfirm
BS 3044:1990 Guide to ergonomics principles in the design and selection of office furniture
PH/9 Confirmed (2012)
Reconfirm
BS 3064:1978 Specification for metric sine bars and sine tables (excluding compound tables)
TDW/4 Confirmed (2012)
Reconfirm
BS 3083:1988 Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes
ISE/109 Confirmed (2012)
Reconfirm
BS 3084:2006 Slide fasteners (Zips). Specification TCI/66/-/9 Confirmed (2012)
Reconfirm
BS 3090:1978 Method of test for the determination of the cuprammonium fluidity of linen materials
TCI/80 Confirmed (2012)
Reconfirm
BS 3092:1973 Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines
MCE/14 Confirmed (2012)
Reconfirm
BS 3110:1959 Methods for measuring the rub resistance of print PAI/43 Confirmed (2012)
Reconfirm
BS 3127:1979 Specification for ferrous and non-ferrous Bourdon tubing
GEL/65/2 Confirmed (2012)
Reconfirm
BS 3130-2:1990
Glossary of packaging terms -- Paper and board packaging
PKW/0/-/9 Confirmed (2012)
Reconfirm
BS 3130-4:1976
Glossary of packaging terms -- Metal containers and aerosols
PKW/0/-/8 Confirmed (2012); Partially replaced by BS EN 13045, BS EN 13046, BS EN 13047 and BS EN 13048:2000
Confirm
BS 3130-5:1994
Glossary of packaging terms -- Plastics and flexible packaging (excluding paper)
PKW/0/-/10 Confirmed (2012)
Reconfirm
BS 3130-6:1981
Glossary of packaging terms -- Wooden packaging PKW/0/-/11 Confirmed (2012)
Reconfirm
BS 3142-2:1990
Specification for manufactured solid smokeless fuels for household use -- Cokes for domestic openable and closed appliances and open fires with fan-assisted primary air
RHE/28 Confirmed (2012)
Reconfirm
BS 3142-3:1970
Specification for manufactured solid smokeless fuels for household use -- Specially reactive fuels for all types of domestic open fire
RHE/28 Confirmed (2012)
Reconfirm
BS 3145:1978 Specification for laboratory pH meters LBI/16 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 14 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 3146-1:1974
Specification for investment castings in metal -- Carbon and low alloy steels
ISE/111 Confirmed (2012)
Reconfirm
BS 3146-2:1975
Specification for investment castings in metal -- Corrosion and heat resisting steels, nickel and cobalt base alloys
ISE/111 Confirmed (2012)
Reconfirm
BS 3166:1959 Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20$0DF to 220$0DF ( -30$0DC to 105$0DC)
RHE/31 Confirmed (2012)
Reconfirm
BS 3170:1972 Specification for flexible couplings for power transmission
MCE/5 Confirmed (2012)
Reconfirm
BS 3173:1996 Specification for spring units for mattresses FW/0/2 Confirmed (2012)
Reconfirm
BS 3181-1:1987
Methods for determination of cotton fibre properties by the airflow method -- Determination of micronaire value by the single compression airflow method
TCI/24 Confirmed (2012)
Reconfirm
BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method
TCI/24 Confirmed (2012)
Reconfirm
BS 3198:1981 Specification for copper hot water storage combination units for domestic purposes
B/504 Confirmed (2012)
Reconfirm
BS 3212:1991 Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
PRI/66 Confirmed (2012)
Reconfirm
BS 3231:1960 Specification for thermographs (bimetallic type) for air temperatures within the range 0$0DF to 140$0DF (-20$0DC to 60$0DC)
RHE/31 Confirmed (2012)
Reconfirm
BS 3248:1986 Specification for sparkguards for use with solid fuel appliances
CW/1 Confirmed (2012)
Reconfirm
BS 3251:1976 Specification. Indicator plates for fire hydrants and emergency water supplies
FSH/17 Confirmed (2012)
Reconfirm
BS 3262-3:1989
Hot-applied thermoplastic road marking materials -- Specification for application of material to road surfaces
B/509/2 Confirmed (2012)
Reconfirm
BS 3313-1:1968
Specification for aluminium capping foil and strip for dairy product containers -- Aluminium capping foil for glass containers
PKW/0 Confirmed (2012)
Reconfirm
BS 3314:1982 Specification for protective aprons for wet work PH/3 Confirmed (2012)
Reconfirm
BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
TCI/24 Confirmed (2012)
Reconfirm
BS 3332:1987 Specification for white metal bearing alloy ingots NFE/27 Confirmed (2012)
Reconfirm
BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics
TCI/24 Confirmed (2012)
BS 3376:1994 Specification for open fires burning solid mineral fuels with convection, with or without boilers
RHE/28 Confirmed (2012)
Reconfirm
BS 3379:1975 Specification for flexible urethane foam for loadbearing applications
PRI/71 Confirmed (2012)
Reconfirm
BS 3396-1:1991
Woven glass fibre fabrics for plastics reinforcement -- Specification for loom-state fabrics
PRI/42 Confirmed (2012)
Reconfirm
BS 3396-2:1987
Woven glass fibre fabrics for plastics reinforcement -- Specification for desized fabrics
PRI/42 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 15 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 3396-3:1987
Woven glass fibre fabrics for plastics reinforcement -- Specification for finished fabrics for use with polyester resin systems
PRI/42 Confirmed (2012)
Reconfirm
BS 3401:1961 Specification for beryllium copper crinkle washers FME/9 Confirmed (2012)
Reconfirm
BS 3403:1972 Specification for indicating tachometer and speedometer systems for industrial, railway and marine use
MCE/14 Confirmed (2012)
Reconfirm
BS 3406-1:1986
Methods for determination of particle size distribution -- Guide to powder sampling
LBI/37 Confirmed (2012)
Reconfirm
BS 3406-4:1993
Methods for determination of particle size distribution -- Guide to microscope and image analysis methods
LBI/37 Confirmed (2012)
Reconfirm
BS 3407:1982 Guide for assessing coke screening plant PTI/16 Confirmed (2012)
Reconfirm
BS 3423:1986 Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use
LBI/1/2 Confirmed (2012)
Reconfirm
BS 3449:1990 Method for resistance of fabrics to water absorption (Static immersion test)
TCI/24 Confirmed (2012)
Reconfirm
BS 3475:1976 Specification for bowl stands for use in hospitals CH/100 Confirmed (2012)
Reconfirm
BS 3507:1976 Specification. Orthodontic wire and tape and dental ligature wire
CH/106/2 Confirmed (2012)
Reconfirm
BS 3520:1962 Specification for dental wrought precious metal alloy wire
CH/106/2 Confirmed (2012)
Reconfirm
BS 3521-2:1991
Terms relating to ophthalmic lenses and spectacle frames -- Glossary of terms relating to spectacle frames
CH/172 Confirmed (2012)
Reconfirm
BS 3529:1962 Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines
MCE/14 Confirmed (2012)
Reconfirm
BS 3531-5.5:1990
Implants for osteosynthesis. Bone screws and auxiliary equipment -- Specification for taps and drills
CH/150/5 Confirmed (2012)
Reconfirm
BS 3531-6.1:1990
Implants for osteosynthesis. Skeletal pins and wires -- Specification for general requirements
CH/150/5 Confirmed (2012)
Reconfirm
BS 3531-14.2:1990
Implants for osteosynthesis. Intramedullary nailing systems -- Specification for medullary pins (Rush type) and introducer/extractors
CH/150/5 Confirmed (2012)
Reconfirm
BS 3532:1990 Method of specifying unsaturated polyester resin systems
PRI/42 Confirmed (2012)
Reconfirm
BS 3537:1979 Specification for gudgeon pins up to 200 mm diameter
MCE/14 Confirmed (2012)
Reconfirm
BS 3551:1962 Specification for alloy steel shackles MHE/1 Confirmed (2012)
Reconfirm
BS 3553:1992 Specification for graphical symbols for coal preparation plant flowsheets
PTI/16 Confirmed (2012)
Reconfirm
BS 3567:1985 Code of practice for preparation of flowsheets for the design of coal preparation plant
PTI/16 Confirmed (2012)
Reconfirm
BS 3568:1988 Method for determination of solubility of wool in alkali TCI/80 Confirmed (2012)
Reconfirm
BS 3572:1986 Specification for access fittings for chimneys and other high structures in concrete or brick work
MHE/12/7 Confirmed (2012)
Reconfirm
BS 3580:1964 Guide to design considerations on the strength of screw threads
FME/9 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 16 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 3584:1989 Determination of solubility of wool in urea-bisulphite solution
TCI/80 Confirmed (2012)
Reconfirm
BS 3592-1:1986
Steel wire for hose reinforcement -- Specification for coated round and flat steel wire for rubber hose reinforcement
ISE/106 Confirmed (2012)
Reconfirm
BS 3619:1976 Specification. Mobile infusion stands CH/100 Confirmed (2012)
Reconfirm
BS 3621:2007+A2:2012
Thief resistant lock assembly. Key egress B/538 Current Confirm
BS 3622:1975 Specification for general purpose stools and anaesthetists' chairs for hospital use
CH/100 Confirmed (2012)
Reconfirm
BS 3625:1963 Specification for eyepiece and screen graticules for the determination of the particle size of powders
LBI/37 Confirmed (2012)
Reconfirm
BS 3641-1:1971
Symbols for machine tools -- General symbols MTE/1 Confirmed (2012)
Reconfirm
BS 3641-3:1973
Specification for symbols for machine tools. -- Additional general symbols
MTE/1 Confirmed (2012)
Reconfirm
BS 3643-2:2007
ISO metric screw threads -- Specification for selected limits of size
FME/9 Confirmed (2012)
Reconfirm
BS 3649:1963 Recommendations for original printing plates PAI/43 Confirmed (2012)
Reconfirm
BS 3666:1982 Specification for size designation of women's wear TCI/66/-/3 Confirmed (2012)
Reconfirm
BS 3678:1986 Specification for access hooks for chimneys and other high structures in steel
MHE/12/7 Confirmed (2012)
Reconfirm
BS 3680-10C:1996
Measurement of liquid flow in open channels. Sediment transport -- Guide to methods of sampling of sand-bed and cohesive-bed materials
CPI/113 Confirmed (2012)
Reconfirm
BS 3682-1:1994
Specification for railway brake hose -- Specification for compressed air brake hose
PRI/66 Confirmed (2012)
Reconfirm
BS 3731:1987 Specification for vee blocks TDW/4 Confirmed (2012)
Reconfirm
BS 3735:1987 Specification for plastics and rubber dustbin lids B/508/1 Confirmed (2012)
Reconfirm
BS 3746:1990 Specification for PVC garden hose PRI/66 Confirmed (2012)
Reconfirm
BS 3749:1991 Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems
PRI/42 Confirmed (2012)
Reconfirm
BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
ISE/110 Confirmed (2012)
Reconfirm
BS 3800-3:1990
General tests for machine tools -- Method of testing performance of machines operating under loaded conditions in respect of thermal distortion
MTE/1 Confirmed (2012)
Reconfirm
BS 3816:1989 Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies
PRI/42 Confirmed (2012)
Reconfirm
BS 3821-1:1974
Specification for hardmetal dies and associated hardmetal tools -- Designation and marking of as-sintered pellets and finished dies
MTE/18 Confirmed (2012)
Reconfirm
BS 3821-2:1974
Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round wire
MTE/18 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 17 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 3821-3:1974
Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round bar
MTE/18 Confirmed (2012)
Reconfirm
BS 3828:1973 Specification for crystal glass CW/29 Confirmed (2012)
Reconfirm
BS 3838:1980 Specification for blazer fabrics TCI/66 Confirmed (2012)
Reconfirm
BS 3841-1:1994
Determination of smoke emission from manufactured solid fuels for domestic use -- General method for determination of smoke emission rate
RHE/28/2 Confirmed (2012)
Reconfirm
BS 3841-2:1994
Determination of smoke emission from manufactured solid fuels for domestic use -- Methods for measuring the smoke emission rate
RHE/28/2 Confirmed (2012)
Reconfirm
BS 3866:1979 Specification for holes and shanks for buttons TCI/66 Confirmed (2012)
Reconfirm
BS 3868:1995 Specification for prefabricated drainage stack units in galvanized steel
ISE/110 Confirmed (2012)
Reconfirm
BS 3884-1:1974
Modular units for machine tools -- Specification for basic units
MTE/1 Confirmed (2012)
Reconfirm
BS 3886:1965 Specification for dental impression compound CH/106/2 Confirmed (2012)
Reconfirm
BS 3903:1977 Methods of test for sulphuric acid, oleum and liquid sulphur trioxide
CII/37 Confirmed (2012)
Reconfirm
BS 3936-4:2007
Nursery stock -- Specification for forest trees, poplars and willows
AW/1 Confirmed (2012)
Reconfirm
BS 3958-1:1982
Thermal insulating materials -- Magnesia preformed insulation
B/540 Confirmed (2012)
Reconfirm
BS 3958-2:1982
Thermal insulating materials -- Calcium silicate preformed insulation
B/540 Confirmed (2012)
Reconfirm
BS 3958-3:1985
Thermal insulating materials -- Metal mesh faced man-made mineral fibre mattresses
B/540 Confirmed (2012)
Reconfirm
BS 3958-4:1982
Thermal insulating materials -- Bonded preformed man-made mineral fibre pipe sections
B/540 Confirmed (2012)
Reconfirm
BS 3958-5:1986
Thermal insulating materials -- Specification for bonded man-made mineral fibre slabs
B/540 Confirmed (2012)
Reconfirm
BS 3958-6:1972
Thermal insulating materials -- Finishing materials; hard setting composition, self-setting cement and gypsum plaster
B/540 Confirmed (2012)
Reconfirm
BS 3962-1:1980
Methods of test for finishes for wooden furniture. -- Assessment of low angle glare by measurement of specular gloss at 85$0D
FW/0/1 Confirmed (2012)
Reconfirm
BS 3962-5:1980
Methods of test for finishes for wooden furniture -- Assessment of surface resistance to cold oils and fats
FW/0/1 Confirmed (2012)
Reconfirm
BS 3962-6:1980
Methods of test for finishes for wooden furniture -- Assessment of resistance to mechanical damage
FW/0/1 Confirmed (2012); Partially replaced by BS EN 15186:2012
Confirm
BS 3987:1991 Specification for anodic oxidation coatings on wrought aluminium for external architectural applications
STI/33 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 18 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 3996:1978 Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)
LBI/1/2 Confirmed (2012)
Reconfirm
BS 3999-4:1967
Methods of measuring the performance of household electrical appliances -- Electric clothes drying cabinets and racks
CPL/59/1 Confirmed (2012)
Reconfirm
BS 4029:1978 Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)
TCI/24 Confirmed (2012)
Reconfirm
BS 4032:1978 Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres
TCI/80 Confirmed (2012)
Reconfirm
BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
TCI/24 Confirmed (2012)
Reconfirm
BS 4046:1991 Specification for compressed straw building slabs B/541 Confirmed (2012)
Reconfirm
BS 4048:Parts 1 and 2:1966
Specification for combined wire and fibre ropes -- Combined ropes. Spring lay ropes
MHE/2 Confirmed (2012)
Withdraw
BS 4068:1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists' use including angular trolleys
CH/100 Confirmed (2012)
Reconfirm
BS 4074:2000 Specification for steel trench struts B/514/21 Confirmed (2012)
Reconfirm
BS 4089:1999 Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
GSE/42 Confirmed (2012)
Reconfirm
BS 4092-1:1996
Specification for domestic front entrance gates -- Specification for metal gates
B/201 Confirmed (2012)
Reconfirm
BS 4110:1999 Specification for visors for vehicle users PH/2/2 Confirmed (2012)
Reconfirm
BS 4129:1990 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel
WEE/29 Confirmed (2012)
Reconfirm
BS 4145:1967 Specification for glass mica boards for electrical purposes
GEL/15 Confirmed (2012)
Reconfirm
BS 4151:1967 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in$u2 (gauge)
GEL/65/2 Confirmed (2012)
Reconfirm
BS 4168-7:1982
Hexagon socket screws and wrench keys: metric series -- Specification for hexagon socket shoulder screws
FME/9 Confirmed (2012)
Reconfirm
BS 4168-8:1982
Hexagon socket screws and wrench keys: metric series -- Specification for hexagon socket countersunk head screws
FME/9 Confirmed (2012)
Withdraw
BS 4185-1:1967
Machine tool components -- Locknuts ('C' type, socket set screw locking)
MTE/1 Confirmed (2012)
Reconfirm
BS 4185-2:1967
Machine tool components -- Collars MTE/1 Confirmed (2012)
Reconfirm
BS 4185-7:1973
Machine tool components -- Wide range collets MTE/1 Confirmed (2012)
Reconfirm
BS 4185-9:1976
Specification. Machine tool components. -- Levelling screws, nuts and seating plates
MTE/1 Confirmed (2012)
Reconfirm
BS 4185-10:1977
Machine tool components -- Trapezoidal threads for lead and feed screw assemblies
MTE/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 19 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4185-11:1983
Machine tool components -- Recommendations for accuracy grades of gears
MTE/1 Confirmed (2012)
Reconfirm
BS 4185-13:1985
Machine tool components -- Specification for dimensions of counterbored holes
MTE/1 Confirmed (2012)
Reconfirm
BS 4185-14:1987
Machine tool components -- Method for determination of the pilot diameter of 60$0D centre holes
MTE/1 Confirmed (2012)
Reconfirm
BS 4204:1989 Specification for flash welding of steel tubes for pressure applications
WEE/29 Confirmed (2012)
Reconfirm
BS 4215-2:1987
Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for straight resistance spot welding electrodes
WEE/29 Confirmed (2012)
Reconfirm
BS 4215-6:1987
Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for electrode adaptors, female taper 1:10
WEE/29 Confirmed (2012)
Reconfirm
BS 4215-7:1987
Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for male electrode caps
WEE/29 Confirmed (2012)
Reconfirm
BS 4215-15:1990
Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for insulated pins for use in electrode back-ups
WEE/29 Confirmed (2012)
Reconfirm
BS 4222:1967 Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces
CH/106/4 Confirmed (2012)
Reconfirm
BS 4235-1:1972
Specification for metric keys and keyways -- Parallel and taper keys
MCE/5 Confirmed (2012)
Reconfirm
BS 4258-2:1989
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of iron content
CII/37 Confirmed (2012)
Reconfirm
BS 4258-3:1989
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of sulphate content
CII/37 Confirmed (2012)
Reconfirm
BS 4258-4:1975
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of fluorine content
CII/37 Confirmed (2012)
Reconfirm
BS 4258-5:1989
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of silica content
CII/37 Confirmed (2012)
Reconfirm
BS 4258-7:1978
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method
CII/37 Confirmed (2012)
Reconfirm
BS 4258-9:1989
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of chloride content
CII/37 Confirmed (2012)
Reconfirm
BS 4258-13:1990
Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of soluble sulphate content (potentiometric method)
CII/37 Confirmed (2012)
Reconfirm
BS 4262:1984 Method of specifying the technical quality of coke for use in blast furnaces
PTI/16 Confirmed (2012)
Reconfirm
BS 4267-0:1987
Ammonium nitrate -- General introduction CII/37 Confirmed (2012)
Reconfirm
BS 4267-1:1988
Ammonium nitrate -- Method for determination of ammoniacal nitrogen content
CII/37 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 20 of 60 June 2016
BS identifier Title Committee Status Reconfirm
BS 4267-2:1988
Ammonium nitrate -- Method for determination of total nitrogen content
CII/37 Confirmed (2012)
Reconfirm
BS 4267-4:1987
Ammonium nitrate -- Method for determination of sulphated ash
CII/37 Confirmed (2012)
Reconfirm
BS 4267-7:1987
Ammonium nitrate -- Methods for determination of nitrite content
CII/37 Confirmed (2012)
Reconfirm
BS 4267-8:1987
Ammonium nitrate -- Methods for determination of chloride content
CII/37 Confirmed (2012)
Reconfirm
BS 4267-9:1987
Ammonium nitrate -- Method for determination of sulphate content
CII/37 Confirmed (2012)
Reconfirm
BS 4267-10:1994
Ammonium nitrate -- Method for determination of matter soluble in diethyl ether
CII/37 Confirmed (2012)
Reconfirm
BS 4267-11:1994
Ammonium nitrate -- Method for determination of inorganic matter and grit insoluble in water
CII/37 Confirmed (2012)
Reconfirm
BS 4272-2:1996
Anaesthetic and analgesic machines -- Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen
CH/121/1 Confirmed (2012)
Reconfirm
BS 4276:1968 Specification for hard metal for wire, bar and tube drawing dies
MTE/18 Confirmed (2012)
Reconfirm
BS 4277:1968 Glossary of terms used in offset lithographic printing PAI/43 Confirmed (2012)
Reconfirm
BS 4284:1981 Specification for dental impression pastes (zinc oxide type)
CH/106/2 Confirmed (2012)
Reconfirm
BS 4305-2:1989
Baths for domestic purposes made of acrylic material -- Specification for connecting dimensions
B/503 Confirmed (2012)
Reconfirm
BS 4320:1968 Specification for metal washers for general engineering purposes. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 4322:1968 Recommendations for buffering on hospital vehicles such as trolleys
CH/100 Confirmed (2012)
Reconfirm
BS 4359-2:1982
Determination of the specific surface area of powders -- Recommended air permeability methods
LBI/37 Confirmed (2012)
Reconfirm
BS 4359-4:1995
Determination of the specific surface area of powders -- Recommendations for methods of determination of metal surface area using gas adsorption techniques
LBI/37 Confirmed (2012)
Reconfirm
BS 4361-1:1968
Woodworking machines -- Components MTE/23 Confirmed (2012)
Reconfirm
BS 4361-3:1972
Specification for woodworking machines -- Machine sizes and capacities
MTE/23 Confirmed (2012)
Reconfirm
BS 4367:1968 Methods of test for nitric acid CII/37 Confirmed (2012)
Reconfirm
BS 4372:1968 Specification for engineers' steel measuring rules TDW/4 Confirmed (2012)
Reconfirm
BS 4376-1:1991
Electrically operated blood storage refrigerators -- Specification for closed reach-in types
RHE/19 Confirmed (2012)
Reconfirm
BS 4376-2:1996
Electrically operated blood storage refrigerators -- Specification for cabinets for the storage of frozen plasma
RHE/19 Confirmed (2012)
Reconfirm
BS 4377:1991 Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
FME/9 Confirmed (2012)
Reconfirm
BS 4429:1987 Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications
MHE/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 21 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4431:1989 Methods of sampling and test for liquefied anhydrous ammonia
CII/37 Confirmed (2012)
Reconfirm
BS 4439:1969 Specification for screwed studs for general purposes. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 4442-1:1969
Specification for lathe spindle noses and faceplates. -- Types 'A' and 'Camlock'
MTE/1 Confirmed (2012)
Reconfirm
BS 4444:1989 Guide to electrical earth monitoring and protective conductor proving
PEL/23 Confirmed (2012)
Reconfirm
BS 4463:1969 Specification for crinkle washers for general engineering purposes. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 4464:1969 Specification for spring washers for general engineering and automobile purposes. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 4467:1991 Guide to dimensions in designing for elderly people PH/9 Confirmed (2012)
Reconfirm
BS 4475:2000 Specification for straight mineral lubricating oils PTI/7 Confirmed (2012)
Reconfirm
BS 4479-1:1990
Design of articles that are to be coated -- General recommendations
STI/33 Confirmed (2012)
Reconfirm
BS 4479-2:1990
Design of articles that are to be coated -- Recommendations for electroplated and autocatalytic coatings
STI/33 Confirmed (2012)
Reconfirm
BS 4479-3:1990
Design of articles that are to be coated -- Recommendations for conversion coatings
STI/33 Confirmed (2012)
Reconfirm
BS 4479-4:1990
Design of articles that are to be coated -- Recommendations for paint coatings and varnish coatings
STI/33 Confirmed (2012)
Reconfirm
BS 4479-7:1990
Design of articles that are to be coated -- Recommendations for thermally sprayed coatings
STI/40 Confirmed (2012)
Reconfirm
BS 4479-8:1990
Design of articles that are to be coated -- Recommendations for vitreous enamel coatings
STI/36 Confirmed (2012)
Reconfirm
BS 4479-9:1990
Design of articles that are to be coated -- Recommendations for low pressure and vacuum deposited coatings
STI/33 Confirmed (2012)
Reconfirm
BS 4482:2005 Steel wire for the reinforcement of concrete products. Specification
ISE/104 Confirmed (2012)
Reconfirm
BS 4483:2005 Steel fabric for the reinforcement of concrete. Specification
ISE/104 Confirmed (2012)
Reconfirm
BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
ISE/104 Confirmed (2012)
Reconfirm
BS 4500A:1970
ISO limits and fits -- Data sheet: selected ISO fits - hole basis
TDW/4 Confirmed (2012)
Withdraw
BS 4500B:1970
ISO limits and fits -- Data sheet: selected ISO fits - shaft basis
TDW/4 Confirmed (2012)
Withdraw
BS 4506:1970 Specification for shaft ends MCE/5 Confirmed (2012)
Reconfirm
BS 4507:1969 Specification for grease gun cartridges (composite type)
GME/24 Confirmed (2012)
Withdrawal
BS 4508-1:1986
Thermally insulated underground pipelines -- Specification for steel cased systems with air gap
B/540 Confirmed (2012)
Reconfirm
BS 4508-4:1977
Thermally insulated underground pipelines -- Specific testing and inspection requirements for cased systems without air gap
B/540 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 22 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4514:2001 Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification
PRI/88/1 Confirmed (2012)
Reconfirm
BS 4531:1986 Specification for portable and mobile troughed belt conveyors
MHE/9 Confirmed (2012)
Reconfirm
BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)
GEL/15 Confirmed (2012)
Reconfirm
BS 4550-0:1978
Methods of testing cement -- General introduction B/516/12 Confirmed (2012)
Reconfirm
BS 4550-3.1:1978
Methods of testing cement. Physical tests -- Introduction
B/516/12 Confirmed (2012)
Reconfirm
BS 4550-6:1978
Methods of testing cement -- Standard sand for mortar cubes
B/516/12 Confirmed (2012)
Reconfirm
BS 4553-1:1998
Specification for 600/1000 V single-phase split concentric electric cables -- Cables having PVC insulation
GEL/20/17 Confirmed (2012)
Reconfirm
BS 4553-2:1998
Specification for 600/1000 V single-phase split concentric electric cables -- Cables having thermosetting insulation
GEL/20/17 Confirmed (2012)
Reconfirm
BS 4553-3:1998
Specification for 600/1000 V single-phase split concentric electric cables -- Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
GEL/20/17 Confirmed (2012)
Reconfirm
BS 4554:1970 Method of test for wettability of textile fabrics TCI/24 Confirmed (2012)
Reconfirm
BS 4581-2:1984
Flanges for mounting grinding wheels on grinding machine tools. -- Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore
MTE/1 Confirmed (2012)
Reconfirm
BS 4582-1:1970
Specification for fine pitch gears (metric module) -- Involute spur and helical gears
MCE/5 Confirmed (2012)
Reconfirm
BS 4592-0:2006+A1:2012
Flooring, stair treads and handrails for industrial use -- Common design requirements and recommendations for installation
B/208/1 Current Confirm
BS 4592-3:2006
Industrial type flooring and stair treads -- Cold formed metal planks. Specification
B/208/1 Confirmed (2012)
Reconfirm
BS 4602:1977 Specification for the use of metric units in specifications for glass containers and finishes
PKW/0/-/7 Confirmed (2012)
Reconfirm
BS 4611:1989 Methods of test for polyolefin tape yarns TCI/24 Confirmed (2012)
Reconfirm
BS 4618-1.1.3:1974
Recommendations for the presentation of plastics design data. Mechanical properties -- Creep lateral contraction ratio (Poisson's ratio)
PRI/21 Confirmed (2012)
Reconfirm
BS 4618-4.3:1974
Recommendations for the presentation of plastics design data. Environmental and chemical effects -- Resistance to colour change produced by exposure to light
PRI/21 Confirmed (2012)
Reconfirm
BS 4618-4.6:1974
Recommendations for the presentation of plastics design data. Environmental and chemical effects -- The thermal endurance of plastics
PRI/21 Confirmed (2012)
Reconfirm
BS 4651-0:1987
Ammonia solution -- Methods for sampling CII/37 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 23 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4651-1:1988
Ammonia solution -- Method for determination of density at 20$0DC
CII/37 Confirmed (2012)
Reconfirm
BS 4651-4:1988
Ammonia solution -- Method for determination of residue after heating at 850$0DC
CII/37 Confirmed (2012)
Reconfirm
BS 4651-5:1988
Ammonia solution -- Method for determination of iron content
CII/37 Confirmed (2012)
Reconfirm
BS 4651-6:1988
Ammonia solution -- Methods for determination of chloride content
CII/37 Confirmed (2012)
Reconfirm
BS 4651-7:1988
Ammonia solution -- Method for determination of carbon dioxide content
CII/37 Confirmed (2012)
Reconfirm
BS 4655:1986 Method for determination of pile loss of cut-pile and non-loop pile upholstery fabrics
TCI/66/2 Confirmed (2012)
Reconfirm
BS 4656-1:1981
Accuracy of machine tools and methods of test -- Specification for lathes, general purpose type
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-2:1988
Accuracy of machine tools and methods of test -- Specification for copying lathes and copying attachments
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-3:1971
Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal or vertical spindle plain
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-4:1971
Specification for the accuracy of machine tools and methods of test -- Milling machines, bed type, horizontal or vertical spindle
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-5:1979
Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal spindle, universal
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-10:1975
Specification for the accuracy of machine tools and methods of test -- Drilling machines, radial type
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-11:1974
Accuracy of machine tools and methods of test -- Drilling machines, vertical floor mounted column and pillar types
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-12:1979
Specification for the accuracy of machine tools and methods of test -- Dividing heads
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-15:1976
Accuracy of machine tools and methods of test -- Drilling machines, turret and single spindle co-ordinate types
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-18:1981
Accuracy of machine tools and methods of test -- Specification for broaching machines, horizontal internal type
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-25:1980
Accuracy of machine tools and methods of test -- Gear planing machines
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-26:1980
Accuracy of machine tools and methods of test -- Gear shaping machines
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-28:1988
Accuracy of machine tools and methods of test -- Specification for numerically controlled turning machines up to and including 1500 mm turning diameter
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-29:1981
Accuracy of machine tools and methods of test -- Specification for automatic lathes, multi-spindle (indexing drum) type
MTE/1/2 Confirmed (2012)
Reconfirm
BS 4656-38:1995
Accuracy of machine tools and methods of test -- Specification for surface finish of test pieces
MTE/1/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 24 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4678-2:1973
Cable trunking -- Steel underfloor (duct) trunking PEL/213 Confirmed (2012)
Reconfirm
BS 4678-4:1982
Cable trunking -- Specification for cable trunking made of insulating material
PEL/213 Confirmed (2012)
Reconfirm
BS 4727-5:Group 01:1985
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment -- Radiology and radiological physics terminology
CH/210/3 Confirmed (2012)
Reconfirm
BS 4737-3.1:1977
Intruder alarm systems. Specifications for components -- Continuous wiring
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.2:1977
Intruder alarm systems. Specifications for components -- Foil on glass
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.3:1977
Intruder alarm systems. Specifications for components -- Protective switches
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.5:1978
Intruder alarm systems. Specifications for components -- Ultrasonic movement detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.6:1978
Intruder alarm systems. Specifications for components -- Acoustic detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.8:1978
Intruder alarm systems. Specifications for components -- Volumetric capacitive detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.9:1978
Intruder alarm systems. Specifications for components -- Pressure mats
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.10:1978
Intruder alarm systems. Specifications for components -- Vibration detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.12:1978
Intruder alarm systems. Specifications for components -- Beam interruption detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.13:1978
Intruder alarm systems. Specifications for components -- Capacitive proximity detectors
GW/1 Confirmed (2012)
Reconfirm
BS 4737-3.14:1986
Intruder alarm systems. Specifications for components -- Specification for deliberately-operated devices
GW/1 Confirmed (2012)
Reconfirm
BS 4737-4.3:1988
Intruder alarm systems in buildings. Codes of practice -- Code of practice for exterior alarm systems
GW/1 Confirmed (2012)
Reconfirm
BS 4737-5.2:1988
Intruder alarm systems. Terms and symbols -- Recommendations for symbols for diagrams
GW/1 Confirmed (2012)
Reconfirm
BS 4751:2005 Mobile sanitary chairs CH/173/1 Confirmed (2012)
Reconfirm
BS 4756:1998 Specification for ready-mixed aluminium priming paints for woodwork
STI/28 Confirmed (2012)
Withdraw
BS 4764:1986 Specification for powder cement paints STI/28 Confirmed (2012)
Reconfirm
BS 4778-2:1991
Quality vocabulary -- Quality concepts and related definitions
QS/1 Confirmed (2012)
Reconfirm
BS 4778-3.1:1991
Quality vocabulary. Availability, reliability and maintainability terms -- Guide to concepts and related definitions
DS/1 Confirmed (2012)
Reconfirm
BS 4819-2:1989
Resistance welding water-cooled transformers of the press-package and portable types. -- Specification for portable transformers
WEE/29 Confirmed (2012)
Reconfirm
BS 4823:1972 Guide to the selection of fitment bores for cylindrical shaft ends
MCE/5 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 25 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4827:1972 Specification for ISO miniature screw threads. Metric series
FME/9 Confirmed (2012)
Reconfirm
BS 4834:1990 Specification for inset open fires without convection with or without boilers, burning solid mineral fuels
RHE/28 Confirmed (2012)
Reconfirm
BS 4840-1:1985
Rigid polyurethane (PUR) foam in slab form -- Specification for PUR foam for use in transport containers and insulated vehicle bodies
PRI/72 Confirmed (2012)
Reconfirm
BS 4840-2:1994
Rigid polyurethane (PUR) foam in slab form -- Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores
PRI/72 Confirmed (2012)
Reconfirm
BS 4845-1:1972
Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags -- Sampling of coke
PTI/16 Confirmed (2012)
Reconfirm
BS 4845-2:1979
Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags -- Sampling of solid smokeless fuels other than coke
PTI/16 Confirmed (2012)
Reconfirm
BS 4856-1:1972
Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for heating duties; without additional ducting
RHE/6 Confirmed (2012)
Reconfirm
BS 4856-2:1975
Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for cooling duties: without additional ducting
RHE/6 Confirmed (2012)
Reconfirm
BS 4856-3:1975
Methods for testing and rating fan coil units, unit heaters and unit coolers -- Thermal and volumetric performance for heating and cooling duties; with additional ducting
RHE/6 Confirmed (2012)
Reconfirm
BS 4856-4:1997
Methods for testing and rating fan coil units, unit heaters and unit coolers -- Determination of sound power levels of fan coil units, unit heaters and unit coolers using reverberating rooms
RHE/6 Confirmed (2012)
Reconfirm
BS 4857-1:1972
Methods for testing and rating terminal reheat units for air distribution systems -- Thermal and aerodynamic performance
RHE/6 Confirmed (2012)
Reconfirm
BS 4857-2:1978
Methods for testing and rating terminal reheat units for air distribution systems -- Acoustic testing and rating
RHE/6 Confirmed (2012)
Reconfirm
BS 4859:1989 Methods for test for fabrics produced from polyolefin tape yarns
TCI/24 Confirmed (2012)
Reconfirm
BS 4868:1972 Specification for profiled aluminium sheet for building B/525/9 Confirmed (2012)
Reconfirm
BS 4880-1:1973
Specification for urinals -- Stainless steel slab urinals B/503 Confirmed (2012)
Reconfirm
BS 4882:1990 Specification for bolting for flanges and pressure containing purposes
FME/9 Confirmed (2012)
Reconfirm
BS 4886:1988 Specification for hospital bedsteads CH/100 Confirmed (2012)
Reconfirm
BS 4904:1978 Specification for external cladding colours for building purposes
B/542 Confirmed (2012)
Reconfirm
BS 4948:1994 Method for assessment of the visible soiling by body contact of upholstery fabrics
TCI/66/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 26 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4954-1:1973
Methods for testing and rating induction units for air distribution systems -- Thermal and aerodynamic performance
RHE/6 Confirmed (2012)
Reconfirm
BS 4954-2:1978
Methods for testing and rating induction units for air distribution systems -- Acoustic testing and rating
RHE/6 Confirmed (2012)
Reconfirm
BS 4973-1:1973
Interlinings -- Nonwoven sew-in interlinings TCI/66 Confirmed (2012)
Reconfirm
BS 4973-2:1973
Interlinings -- Nonwoven fusible interlinings TCI/66 Confirmed (2012)
Reconfirm
BS 4973-3:1976
Interlinings -- Woven and knitted fusible interlinings TCI/66 Confirmed (2012)
Reconfirm
BS 4973-4:1990
Interlinings -- Specification for woven sew-in interlinings
TCI/66 Confirmed (2012)
Reconfirm
BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)
B/508/1 Confirmed (2012)
Reconfirm
BS 4999-103:2004
General requirements for rotating electrical machines -- Specification for symbols
PEL/2 Confirmed (2012)
Reconfirm
BS 4999-140:1987
General requirements for rotating electrical machines -- Specification for voltage regulation and parallel operation of a.c. synchronous generators
PEL/2 Confirmed (2012)
Reconfirm
BS 4999-145:1987
General requirements for rotating electrical machines -- Specification for winding terminations
PEL/2 Confirmed (2012)
Reconfirm
BS 5000-11:1973
Specification for rotating electrical machines of particular types or for particular applications -- Small-power electric motors and generators
PEL/2 Confirmed (2012)
Reconfirm
BS 5041-1:1987
Fire hydrant systems equipment -- Specification for landing valves for wet risers
FSH/17 Confirmed (2012)
Reconfirm
BS 5041-2:1987
Fire hydrant systems equipment -- Specification for landing valves for dry risers
FSH/17 Confirmed (2012)
Reconfirm
BS 5041-3:1975
Fire hydrant systems equipment -- Specification for inlet breechings for dry riser inlets
FSH/17 Confirmed (2012)
Reconfirm
BS 5041-4:1975
Fire hydrant systems equipment -- Specification for boxes for landing valves for dry risers
FSH/17 Confirmed (2012)
Reconfirm
BS 5041-5:1974
Fire hydrant systems equipment -- Specification for boxes for foam inlets and dry riser inlets
FSH/17 Confirmed (2012)
Reconfirm
BS 5045-7:2000
Transportable gas containers -- Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications
PVE/3/3 Confirmed (2012)
Reconfirm
BS 5045-8:2000
Transportable gas containers -- Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15$0DC for special portable application
PVE/3/3 Confirmed (2012)
Reconfirm
BS 5058:1973 Method for the assessment of drape of fabrics TCI/24 Confirmed (2012)
Reconfirm
BS 5066:1974 Method of test for the resistance of fabrics to an artificial shower
TCI/24 Confirmed (2012)
Reconfirm
BS 5074:1974 Specification for short and long solid-stem thermometers for precision use
LBI/1/2 Confirmed (2012)
Reconfirm
BS 5077:1974 Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507
GME/24 Confirmed (2012)
Withdrawal
BS 5078:1974 Specification for jig and fixture components MTE/18 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 27 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5106:1988 Specification for dimensions of spiral anti-extrusion back-up rings and their housings
MCE/11 Confirmed (2012)
Reconfirm
BS 5116:1974 Method of test for determination of breaking tenacity of flat bundles of cotton fibres
TCI/24 Confirmed (2012)
Reconfirm
BS 5138:1974 Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts
MCE/14 Confirmed (2012)
Reconfirm
BS 5139:1991 Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion
PRI/82 Confirmed (2012)
Reconfirm
BS 5141-1:1975
Specification for air heating and cooling coils -- Method of testing for rating of cooling coils
RHE/6 Confirmed (2012)
Reconfirm
BS 5141-2:1977
Specification for air heating and cooling coils -- Method of testing for rating of heating coils
RHE/6 Confirmed (2012)
Reconfirm
BS 5158:1989 Specification for cast iron plug valves PSE/18/3 Confirmed (2012)
Reconfirm
BS 5173-102.8:1987
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Pressure impulse test for rigid helix reinforced thermoplastics hoses
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-102.3:1988
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Determination of volumetric expansion of fuel-dispensing pump hoses
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-102.10:1990
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests -- Hydrostatic tests for oil suction and discharge hose
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-103.6:1990
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of ignitability of lining
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-103.2:1990
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of crush resistance of hoses
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-103.7:1991
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-103.13:1994
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests -- Determination of resistance to fire
PRI/66 Confirmed (2012)
Reconfirm
BS 5173-106.2:1990
Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests -- General requirements for high temperature ageing tests
PRI/66 Confirmed (2012)
Reconfirm
BS 5189-3:1975
Dental casting investments -- Ethyl silicate-bonded investment materials
CH/106/2 Confirmed (2012)
Reconfirm
BS 5192-1:1993
Guide to production control -- Introduction MS/1 Confirmed (2012)
Reconfirm
BS 5192-2:1993
Guide to production control -- Production programming
MS/1 Confirmed (2012)
Reconfirm
BS 5192-3:1993
Guide to production control -- Ordering methods MS/1 Confirmed (2012)
Reconfirm
BS 5192-4:1993
Guide to production control -- Dispatching (shop-floor control)
MS/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 28 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5192-5:1993
Guide to production control -- The relationship between production control and other management functions
MS/1 Confirmed (2012)
Reconfirm
BS 5192-6:1993
Guide to production control -- Computer aided production control
MS/1 Confirmed (2012)
Reconfirm
BS 5204-1:1975
Specification for straightedges -- Cast iron straightedges (bow shaped and I-section)
TDW/4 Confirmed (2012)
Reconfirm
BS 5204-2:1977
Specification for straightedges -- Steel or granite straightedges of rectangular section
TDW/4 Confirmed (2012)
Reconfirm
BS 5208:1975 Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines
MCE/14 Confirmed (2012)
Reconfirm
BS 5223-3:1976
Specification for hospital bedding -- Flexible polyurethane pillows
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5241-2:1991
Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site -- Specification for dispensed foam for thermal insulation or buoyancy applications
PRI/72 Confirmed (2012)
Reconfirm
BS 5244:1986 Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
PRI/66 Confirmed (2012)
Reconfirm
BS 5245:1975 Specification for phosphoric acid based flux for soft soldered joints in stainless steel
ISE/110 Confirmed (2012)
Reconfirm
BS 5258-9:1989
Safety of domestic gas appliances -- Specification for combined appliances: fanned-circulation ducted-air heaters/circulators
GSE/20 Confirmed (2012)
Reconfirm
BS 5261-3:1989
Copy preparation and proof correction. -- Specification for marks for mathematical copy preparation and mathematical proof correction and their uses
PAI/43 Confirmed (2012)
Reconfirm
BS 5273:1975 Specification. Dense tar surfacing for roads and other paved areas
B/510 Confirmed (2012)
Reconfirm
BS 5276-1:1984
Pressure vessel details (dimensions) -- Specification for davits for branch covers of steel vessels
PVE/1 Confirmed (2012)
Reconfirm
BS 5306-4:2001+A1:2012
Fire extinguishing installations and equipment on premises -- Specification for carbon dioxide systems
FSH/18/6 Current Confirm
BS 5306-5.2:1984
Code of practice for fire extinguishing installations and equipment on premises. Halon systems -- Halon 1211 total flooding systems
FSH/18 Confirmed (2012)
Reconfirm
BS 5306-5.1:1992
Code of practice for fire extinguishing installations and equipment on premises. Halon systems -- Specification for halon 1301 total flooding systems
FSH/18 Confirmed (2012)
Reconfirm
BS 5306-8:2012
Fire extinguishing installations and equipment on premises -- Selection and positioning of portable fire extinguishers. Code of practice
FSH/2 Current Confirm
BS 5317:1976 Specification. Metric length bars and their accessories
TDW/4 Confirmed (2012)
Reconfirm
BS 5326:1976 Specification. Internal broaching tools and pull chuck locations
MTE/1 Confirmed (2012)
Reconfirm
BS 5327:1976 Specification. Swept elbow bends for fluid power applications
MCE/18 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 29 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5350-C6:1990
Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Determination of bond strength in direct tension in sandwich panels
PRI/52 Confirmed (2012)
Reconfirm
BS 5350-G2:1987
Methods of test for adhesives. Tests on anaerobic adhesives -- Determination of static shear strength of anaerobic adhesives
PRI/52 Confirmed (2012)
Reconfirm
BS 5353:1989 Specification for steel plug valves PSE/18/3 Confirmed (2012)
Reconfirm
BS 5372:1997+A1:2012
Specification for Dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors
GEL/20/11 Current Confirm
BS 5388:1976 Specification for spray taps B/504 Confirmed (2012)
Reconfirm
BS 5409-1:1976
Specification for nylon tubing -- Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations
PRI/66 Confirmed (2012)
Reconfirm
BS 5415-1:1985
Safety of electrical motor-operated industrial and commercial cleaning appliances -- Specification for general requirements
CPL/61/10 Confirmed (2012)
Reconfirm
BS 5421-2:1978
Methods of test for elastomeric threads -- Polyurethane thread (elastane yarn)
TCI/24 Confirmed (2012)
Reconfirm
BS 5424-2:1987
Low-voltage controlgear -- Specification for semiconductor contactors (solid state contactors)
PEL/17 Confirmed (2012)
Reconfirm
BS 5426:1993 Specification for workwear and career wear TCI/66 Confirmed (2012)
Reconfirm
BS 5433:1976 Specification for underground stopvalves for water services
B/504 Confirmed (2012)
Reconfirm
BS 5440-1:2008
Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) -- Specification for installation of gas appliances to chimneys and for maintenance of chimneys
GSE/30 Current Reconfirm
BS 5441:1988 Methods of test for knitted fabrics TCI/24 Confirmed (2012)
Reconfirm
BS 5470:1977 Specification for glass alcohol hydrometers not incorporating a thermometer
LBI/1/2 Confirmed (2012)
Reconfirm
BS 5471:1977 Specification for thermometer for use with alcohol hydrometers
LBI/1/2 Confirmed (2012)
Reconfirm
BS 5482-2:1977
Domestic butane- and propane-gas-burning installations -- Installations in caravans and non-permanent dwellings
GSE/24 Confirmed (2012)
Revision
BS 5505-3:1977
Specification for bidets -- Vitreous china bidets over rim supply only. Quality, workmanship and functional dimensions other than connecting dimensions.
B/503 Confirmed (2012)
Reconfirm
BS 5506-3:1977
Specification for wash basins -- Wash basins (one or three tap holes). Materials, quality, design and construction
B/503 Confirmed (2012)
Reconfirm
BS 5520:1977 Specification for vitreous china bowl urinals (rimless type)
B/503 Confirmed (2012)
Reconfirm
BS 5535:1978 Specification for right angle and box angle plates TDW/4 Confirmed (2012)
Reconfirm
BS 5536:1988 Recommendations for preparation of technical drawings for microfilming
TDW/4 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 30 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5551-4.2.2:1987
Fertilizers. Chemical analysis. Determination of phosphorus. -- Extraction of phosphates soluble in mineral acids
CII/37 Confirmed (2012)
Reconfirm
BS 5551-4.2.3:1987
Fertilizers. Chemical analysis. Determination of phosphorus. -- Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method)
CII/37 Confirmed (2012)
Reconfirm
BS 5590:1978 Specification for screw thread metric series measuring cylinders
TDW/4 Confirmed (2012)
Reconfirm
BS 5597:1991 Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
PKW/0/-/10 Confirmed (2012)
Reconfirm
BS 5600-1.1:1979
Powder metallurgical materials and products. General information -- Introduction and contents
ISE/65 Confirmed (2012)
Reconfirm
BS 5607:1998 Code of practice for the safe use of explosives in the construction industry
B/513 Confirmed (2012)
Reconfirm
BS 5609:1986 Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material
PKW/0 Confirmed (2012)
Reconfirm
BS 5612:1978 Specification for dental porcelains for jacket crowns CH/106/2 Confirmed (2012)
Reconfirm
BS 5617:1985 Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves
PRI/72 Confirmed (2012)
Reconfirm
BS 5618:1985 Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
PRI/72 Confirmed (2012)
Reconfirm
BS 5627:1984 Specification for plastics connectors for use with horizontal outlet vitreous china WC pans
B/503 Confirmed (2012)
Reconfirm
BS 5655-11:2005
Lifts and service lifts -- Code of practice for the undertaking of modifications to existing electric lifts
MHE/4 Confirmed (2012)
Reconfirm
BS 5655-12:2005
Lifts and service lifts -- Code of practice for the undertaking of modifications to existing hydraulic lifts
MHE/4 Confirmed (2012)
Reconfirm
BS 5655-14:1995
Lifts and service lifts -- Specification for hand-powered service lifts and platform hoists
MHE/4 Confirmed (2012)
Reconfirm
BS 5739:1979 Method of presentation of lubrication instructions for machine tools
MTE/1 Confirmed (2012)
Reconfirm
BS 5740:1989 Specification for oblong flat-top cans for liquid products
PKW/0/-/8 Confirmed (2012)
Reconfirm
BS 5760-2:1994
Reliability of systems, equipment and components -- Guide to the assessment of reliability
DS/1 Confirmed (2012)
Reconfirm
BS 5779:1979 Specification for spray mixing taps B/504 Confirmed (2012)
Reconfirm
BS 5803-5:1985
Thermal insulation for use in pitched roof spaces in dwellings -- Specification for installation of man-made mineral fibre and cellulose fibre insulation
B/540 Confirmed (2012)
Reconfirm
BS 5815-2:1988
Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector -- Specification for towels and napkins
TCI/66/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 31 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5815-3:1991
Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector -- Specification for counterpanes and continental quilt secondary covers including flammability performance
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5837:2012 Trees in relation to design, demolition and construction. Recommendations
B/213 Current Confirm
BS 5842:1980 Specification for thermoplastic hose assemblies for dock, road and tanker use
PRI/66 Confirmed (2012)
Reconfirm
BS 5853:1980 Specification for medicine trolleys CH/100 Confirmed (2012)
Reconfirm
BS 5866-1:1990
Blankets suitable for use in the public sector -- Specification for wool and wool/polyamide blankets
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5866-2:1991
Blankets suitable for use in the public sector -- Specification for cotton leno cellular blankets
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5866-3:1991
Blankets suitable for use in the public sector -- Specification for synthetic fibre cellular blankets
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5866-4:1991
Blankets suitable for use in the public sector -- Specification for flammability performance
TCI/66/1 Confirmed (2012)
Reconfirm
BS 5873-4:1998
Educational furniture -- Specification for strength and stability of storage furniture for educational institutions
FW/0/4 Confirmed (2012)
Reconfirm
BS 5873-5:1998
Educational furniture -- Specification for security of fixed secure storage furniture for educational institutions
FW/0/4 Confirmed (2012)
Reconfirm
BS 5877:1980 Guide for subjective listening tests for sound radio receivers
EPL/100 Confirmed (2012)
Reconfirm
BS 5892-5:1987+A2:2008
Railway rolling stock material (metric) -- Specification for steel bars for retaining rings for tyred wheels
RAE/3/-/1 Confirmed (2012)
Reconfirm
BS 5892-8:2012
Railway rolling stock materials -- Railway applications. Wheelsets and bogies. Powered and non-powered wheelsets with inboard bearings. Product requirements
RAE/3/-/1 Current Reconfirm
BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete. Specification
ISE/104 Current Confirm
BS 5900:2012 Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification
MHE/4 Current Reconfirm
BS 5904:1980 Specification for computer programming language RTL/2
IST/5 Confirmed (2012)
Reconfirm
BS 5905:1980 Specification for computer programming language CORAL 66
IST/5 Confirmed (2012)
Reconfirm
BS 5906:2005 Waste management in buildings. Code of practice B/508/1 Confirmed (2012)
Reconfirm
BS 5908-1:2012
Fire and explosion precautions at premises handling flammable gases, liquids and dusts -- Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises
EXL/23 Current Confirm
BS 5908-2:2012
Fire and explosion precautions at premises handling flammable gases, liquids and dusts -- Guide to applicable standards and regulations
EXL/23 Current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 32 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 5944-4:1984
Measurement of airborne noise from hydraulic fluid power systems and components -- Method of determining sound power levels from valves controlling flow and pressure
MCE/18 Confirmed (2012)
Reconfirm
BS 5944-5:1985
Measurement of airborne noise from hydraulic fluid power systems and components -- Simplified method of determining sound power levels from pumps using an anechoic chamber
MCE/18 Confirmed (2012)
Reconfirm
BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
PRI/26 Confirmed (2012)
Reconfirm
BS 5965:1980 Specification for manually driven balanced personal homelifts
MHE/4 Confirmed (2012)
Reconfirm
BS 5970:2012 Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100$0DC to +870$0DC. Code of practice
B/540 Current Confirm
BS 5972:1980 Specification for photoelectric control units for road lighting
CPL/34/4/1 Confirmed (2012)
Reconfirm
BS 5992-6:1984
Electrical relays -- Specification for the basic modules for the dimensions of general purpose all-or-nothing relays
PEL/95 Confirmed (2012)
Reconfirm
BS 5993:1994 Specification for cricket balls SW/136 Confirmed (2012)
Reconfirm
BS 6004:2012 Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting
GEL/20/17 Current Confirm
BS 6069-4.2:1991
Characterization of air quality. Stationary source emissions. -- Method for the determination of asbestos plant emissions by fibre count measurement
EH/2/1 Confirmed (2012)
Reconfirm
BS 6100-2:2007
Building and civil engineering. Vocabulary -- Spaces, building types, environment and physical planning
CB/101/-/2 Confirmed (2012)
Reconfirm
BS 6100-3:2007
Building and civil engineering. Vocabulary -- Civil engineering. General
CB/101/-/2 Confirmed (2012)
Reconfirm
BS 6100-8:2007
Building and civil engineering. Vocabulary -- Work with timber and wood-based panels
CB/101/-/2 Confirmed (2012)
Reconfirm
BS 6100-9:2007
Building and civil engineering. Vocabulary -- Work with concrete and plaster
CB/101/-/2 Confirmed (2012)
Reconfirm
BS 6100-11:2007
Building and civil engineering. Vocabulary -- Performance characteristics, measurement and joints
CB/101/-/2 Confirmed (2012)
Reconfirm
BS 6101-2:1991
Machine tool ball screws -- Specification for accuracy, including geometrical tests
MTE/1 Confirmed (2012)
Reconfirm
BS 6106:1981 Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk
PKW/0/-/7 Confirmed (2012)
Reconfirm
BS 6129-1:1981
Code of practice for the selection and application of bellows expansion joints for use in pressure systems. -- Metallic bellows expansion joints
PSE/14 Confirmed (2012)
Reconfirm
BS 6130-1:1993
Hose and hose assemblies for asphalt and bitumen. -- Specification for flexible metallic hose and hose assemblies
GSE/42 Confirmed (2012)
Reconfirm
BS 6134:1991 Specification for pressure and vacuum switches GEL/65/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 33 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6143-1:1992
Guide to the economics of quality -- Process cost model
QS/1 Confirmed (2012)
Reconfirm
BS 6143-2:1990
Guide to the economics of quality -- Prevention, appraisal and failure model
QS/1 Confirmed (2012)
Reconfirm
BS 6144:1990 Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
RHE/7 Confirmed (2012)
Reconfirm
BS 6155:1990 Specification for tracheal tubes for large animals in veterinary anaesthesia
CH/121/5 Confirmed (2012)
Reconfirm
BS 6161-18:1991
Methods of test for anodic oxidation coatings on aluminium and its alloys -- Determination of surface abrasion resistance
STI/33 Confirmed (2012)
Reconfirm
BS 6174:1982 Specification for differential pressure transmitters with electrical outputs
GEL/65/2 Confirmed (2012)
Reconfirm
BS 6183-1:2000
Protective equipment for cricketers -- General requirements
PH/3/11 Confirmed (2012)
Reconfirm
BS 6183-2:2000
Protective equipment for cricketers -- Genital protectors
PH/3/11 Confirmed (2012)
Reconfirm
BS 6183-3:2000
Protective equipment for cricketers -- Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen
PH/3/11 Confirmed (2012)
Reconfirm
BS 6183-4:2001
Protective equipment for cricketers -- Gloves for batsmen
PH/3/11 Confirmed (2012)
Reconfirm
BS 6185:1982 Specification for size designation of men's wear TCI/66/-/3 Confirmed (2012)
Reconfirm
BS 6189:1989 Glossary of terms relating to fabrics and associated fibres, yarns and processes
TCI/66/-3 Confirmed (2012)
Reconfirm
BS 6195:2006 Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
GEL/20/17 Confirmed (2012)
Reconfirm
BS 6231:2006 Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
GEL/20/17 Confirmed (2012)
Reconfirm
BS 6261:1982 Method for evaluating the application of and interaction between components in upholstered furniture
FW/0/1 Confirmed (2012)
Reconfirm
BS 6263-2:1991
Care and maintenance of floor surfaces -- Code of practice for resilient sheet and tile flooring
TCI/66 Confirmed (2012)
Reconfirm
BS 6280:1982 Method of vacuum (backsiphonage) test for water-using appliances
B/504 Confirmed (2012)
Reconfirm
BS 6283-2:1991
Safety and control devices for use in hot water systems -- Specifications for temperature relief valves for pressures from 1 bar to 10 bar
B/504 Confirmed (2012)
Reconfirm
BS 6290-2:1999
Lead-acid stationary cells and batteries -- Specification for the high-performance Plante positive type
PEL/21 Confirmed (2012)
Reconfirm
BS 6290-3:1999
Lead-acid stationary cells and batteries -- Specification for the flat positive plate type
PEL/21 Confirmed (2012)
Reconfirm
BS 6312-1:1994
Connectors for analogue telecommunication interfaces -- Specification for plugs
TCT/2 Confirmed (2012)
Reconfirm
BS 6312-2.1:1994
Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312:Part 1 -- Specification for sockets. General requirements
TCT/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 34 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6312-2.2:1997
Connectors for analogue telecommunication interfaces -- Particular requirements for fixed socket-outlets used in permanent wiring installations
TCT/2 Confirmed (2012)
Reconfirm
BS 6319-1:1983
Testing of resin and polymer/cement compositions for use in construction -- Method for preparation of test specimens
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-5:1984
Testing of resin and polymer/cement compositions for use in construction -- Methods for determination of density of hardened resin compositions
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-7:1985
Testing of resin and polymer/cement compositions for use in construction -- Method for measurement of tensile strength
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-8:1984
Testing of resin and polymer/cement compositions for use in construction -- Method for the assessment of resistance to liquids
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-9:1987
Testing of resin and polymer/cement compositions for use in construction -- Method for measurement and classification of peak exotherm temperature
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-10:1987
Testing of resin and polymer/cement compositions for use in construction -- Method for measurement of temperature of deflection under a bending stress
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-11:1993
Testing of resin and polymer/cement compositions for use in construction -- Methods for determination of creep in compression and in tension
B/517/8 Confirmed (2012)
Reconfirm
BS 6319-12:1992
Testing of resin and polymer/cement compositions for use in construction -- Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion
B/517/8 Confirmed (2012)
Reconfirm
BS 6324-1:1983
Terms relating to surgical implants -- Glossary of general medical terms
CH/150 Confirmed (2012)
Reconfirm
BS 6324-2:1983
Terms relating to surgical implants -- Glossary of terms relating to mechanics
CH/150 Confirmed (2012)
Reconfirm
BS 6324-3:1983
Terms relating to surgical implants -- Glossary of terms relating to materials
CH/150 Confirmed (2012)
Reconfirm
BS 6324-4:1983
Terms relating to surgical implants -- Glossary of orthopaedic surgical terms
CH/150 Confirmed (2012)
Reconfirm
BS 6332-6:1990
Thermal performance of domestic gas appliances -- Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
GSE/20 Confirmed (2012)
Reconfirm
BS 6336:1998 Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
FSH/22 Confirmed (2012)
Reconfirm
BS 6340-1:1983
Shower units -- Guide on choice of shower units and their components for use in private dwellings
B/503 Confirmed (2012)
Reconfirm
BS 6340-2:1983
Shower units -- Specification for the installation of shower units
B/503 Confirmed (2012)
Reconfirm
BS 6340-4:1984
Shower units -- Specification for shower heads and related equipment
B/503 Confirmed (2012)
Reconfirm
BS 6349-8:2007
Maritime structures -- Code of practice for the design of Ro-Ro ramps, linkspans and walkways
CB/502 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 35 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6349-1-3:2012
Maritime works -- General. Code of practice for geotechnical design
CB/502 Current Confirm
BS 6374-1:1985
Lining of equipment with polymeric materials for the process idustries. -- Specification for lining with sheet thermoplastics
PVE/1 Confirmed (2012)
Reconfirm
BS 6374-2:1984
Lining of equipment with polymeric materials for the process industries -- Specification for lining with non-sheet applied thermoplastics
PVE/1 Confirmed (2012)
Reconfirm
BS 6374-3:1984
Lining of equipment with polymeric materials for the process industries -- Specification for lining with stoved thermosetting resins
PVE/1 Confirmed (2012)
Reconfirm
BS 6374-4:1984
Lining of equipment with polymeric materials for the process industries -- Specification for lining with cold curing thermosetting resins
PVE/1 Confirmed (2012)
Reconfirm
BS 6374-5:1985
Lining of equipment with polymeric materials for the process industries -- Specification for lining with rubbers
PVE/1 Confirmed (2012)
Reconfirm
BS 6395:1983 Method for numerical designation of fabric faults by visual inspection
TCI/66 Confirmed (2012)
Reconfirm
BS 6400-3:2007
Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m$u3/h -- Low and medium pressure (3rd family gases)
GSE/30 Confirmed (2012)
Reconfirm
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
FSH/21 Confirmed (2012)
Reconfirm
BS 6405:1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2
MHE/1 Confirmed (2012)
Reconfirm
BS 6407-1:1983
Cage pallets for retail use -- Specification for collapsible cage pallets rated at 300 kg
PKW/0 Confirmed (2012)
Reconfirm
BS 6407-2:1984
Cage pallets for retail use -- Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
PKW/0 Confirmed (2012)
Reconfirm
BS 6447:1984 Specification for absolute and gauge pressure transmitters with electrical outputs
GEL/65/2 Confirmed (2012)
Reconfirm
BS 6462:1985 Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
B/538/4 Confirmed (2012)
Reconfirm
BS 6463-103:1999
Quicklime, hydrated lime and natural calcium carbonate -- Methods for physical testing
B/516/11 Confirmed (2012)
Reconfirm
BS 6469-99.2:1992
Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811 -- Electrical tests
GEL/20/17 Confirmed (2012)
Reconfirm
BS 6476:1984 Guide to garment quality and relevant British Standards
TCI/66/-/3 Confirmed (2012)
Reconfirm
BS 6498:2002 Guide to preparation of microfilm and other microforms that may be required as evidence
IDT/1 Confirmed (2012)
Reconfirm
BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers. Specification
PKW/0/-/8 Confirmed (2012)
Reconfirm
BS 6515:1984 Specification for polyethylene damp-proof courses for masonry
B/546 Confirmed (2012)
Reconfirm
BS 6524:1984 Method for determination of the surface resistivity of a textile fabric
TCI/24 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 36 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6526:1998 Domestic oven gloves. Requirements and test methods
PH/3/8 Confirmed (2012)
Reconfirm
BS 6543:1985 Guide to use of industrial by-products and waste materials in building and civil engineering
B/510 Confirmed (2012)
Reconfirm
BS 6571-1:1989
Vehicle parking control equipment -- Specification for coin operated clockwork parking meters
B/509/20 Confirmed (2012)
Reconfirm
BS 6571-2:1989
Vehicle parking control equipment -- Specification for electrically powered parking meters
B/509/20 Confirmed (2012)
Reconfirm
BS 6571-4:1989
Vehicle parking control equipment -- Specification for barrier type parking control equipment
B/509/20 Confirmed (2012)
Reconfirm
BS 6571-6:1996
Vehicle parking control equipment -- Specification for pay-on-foot parking control equipment
B/509/20 Confirmed (2012)
Reconfirm
BS 6571-7:1997
Vehicle parking control equipment -- Specification for parking discs
B/509/20 Confirmed (2012)
Reconfirm
BS 6571-8:1997
Vehicle parking control equipment -- Specification for pre-purchased parking vouchers
B/509/20 Confirmed (2012)
Reconfirm
BS 6576:2005+A1:2012
Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses
B/525/6 Current Confirm
BS 6579-1:1988
Safety fences and barriers for highways -- Specification for components for tensioned corrugated beam safety fence on Z posts
B/509 Confirmed (2012)
Reconfirm
BS 6579-3:1988
Safety fences and barriers for highways -- Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence
B/509 Confirmed (2012)
Reconfirm
BS 6579-4:1990
Safety fences and barriers for highways -- Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence
B/509 Confirmed (2012)
Reconfirm
BS 6579-5:1986
Safety fences and barriers for highways -- Specification for open box beam safety fence (single height)
B/509 Confirmed (2012)
Reconfirm
BS 6579-6:1988
Safety fences and barriers for highways -- Specification for components for open box beam safety fence (double height)
B/509 Confirmed (2012)
Reconfirm
BS 6579-7:1989
Safety fences and barriers for highways -- Specification for components for untensioned corrugated beam safety fence
B/509 Confirmed (2012)
Reconfirm
BS 6579-8:1987
Safety fences and barriers for highways -- Specification for concrete safety barriers
B/509 Confirmed (2012)
Reconfirm
BS 6583:1985 Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
RHE/6 Confirmed (2012)
Reconfirm
BS 6587:1985 Method of acceptance inspection for fasteners FME/9 Confirmed (2012)
Reconfirm
BS 6622:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
GEL/20/16 Confirmed (2012)
Reconfirm
BS 6645:1985 Method for determination of alkali solubility of flax materials
TCI/80 Confirmed (2012)
Reconfirm
BS 6646:1985 Method for determination of ash of textiles TCI/80 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 37 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content
TCI/80 Confirmed (2012)
Reconfirm
BS 6652:1985 Specification for packagings resistant to opening by children
PKW/0/3 Confirmed (2012)
Withdraw
BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
TCI/24 Confirmed (2012)
Reconfirm
BS 6675:1986 Specification for servicing valves (copper alloy) for water services
B/504 Confirmed (2012)
Reconfirm
BS 6683:1985 Guide to installation and use of valves PSE/18/1 Confirmed (2012)
Reconfirm
BS 6720:1986 Specification for marking transit information on packages for distribution
PKW/0 Confirmed (2012)
Reconfirm
BS 6747:1987 Specification for orthodontic resins CH/106/2 Confirmed (2012)
Reconfirm
BS 6751:1986 Guide for protection of machine tools intended for use in extreme environmental conditions
MTE/1 Confirmed (2012)
Reconfirm
BS 6793:1987 Specification for men's uniform shirts TCI/66 Confirmed (2012)
Reconfirm
BS 6808-3:1989
Coordinate measuring machines -- Code of practice TDW/4 Confirmed (2012)
Reconfirm
BS 6809:1987 Method for calibration of radiometers for use in fire testing
FSH/22 Confirmed (2012)
Reconfirm
BS 6841:1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
GME/21/6 Confirmed (2012)
Reconfirm
BS 6859-1:1987
Operating tables -- Specification for mobile general operating tables
CH/100 Confirmed (2012)
Reconfirm
BS 6859-2:1987
Operating tables -- Specification for fixed-pedestal general operating tables
CH/100 Confirmed (2012)
Reconfirm
BS 6870-3:1989
Analysis of aluminium ores -- Method for multi-element analysis by wavelength dispersive X-ray fluorescence
NFE/35 Confirmed (2012)
Reconfirm
BS 6880-1:1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Fundamental and design considerations
RHE/2 Confirmed (2012)
Reconfirm
BS 6880-2:1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Selection of equipment
RHE/2 Confirmed (2012)
Reconfirm
BS 6880-3:1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW -- Installation, commissioning and maintenance
RHE/2 Confirmed (2012)
Reconfirm
BS 6884:1987 Recommendations for plan dimensions of unit loads PKW/0 Confirmed (2012)
Reconfirm
BS 6885:1988 Specification for miniature cartridge fuse links for use on printed wiring boards
PEL/32 Confirmed (2012)
Reconfirm
BS 6898:1987 Specification for glass centrifuge tubes for general laboratory use
LBI/1/2 Confirmed (2012)
Reconfirm
BS 6905:1987 Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
CH/216 Confirmed (2012)
Reconfirm
BS 6909:1988 Method for generation and counting of the airborne linting propensity of fabrics in the dry state
TCI/24 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 38 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 6913-5:1990
Operation and maintenance of earth-moving machinery -- Specification for diagnostic ports
B/513/1 Confirmed (2012)
Reconfirm
BS 6920-3:2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- High temperature tests
EH/6 Confirmed (2012)
Reconfirm
BS 6942-2:1989
Design and construction of small kits for oxy-fuel gas welding and allied processes -- Specification for kits using refillable gas containers for oxygen and fuel gas
WEE/18 Confirmed (2012)
Reconfirm
BS 6944:1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
WEE/29 Confirmed (2012)
Reconfirm
BS 6946:1988 Specification for metal channel cable support systems for electrical installations
PEL/213 Confirmed (2012)
Reconfirm
BS 6965-1:1988
Creasing properties of carton board. -- Method for determination of crease recovery (spring back) of 90$0D fold
PKW/0/-/9 Confirmed (2012)
Reconfirm
BS 6972:1988 Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
PEL/23 Confirmed (2012)
Reconfirm
BS 6979:1989 Method for measurement of static deflection of power presses
MTE/1 Confirmed (2012)
Reconfirm
BS 6981:1988 Method for determination of acid content of wool TCI/80 Confirmed (2012)
Reconfirm
BS 6991:1990 Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
PEL/23 Confirmed (2012)
Reconfirm
BS 7000-6:2005 (large print version)
Design management systems -- Managing inclusive design. Guide
DES/1 Confirmed (2012)
Reconfirm
BS 7001:1988 Specification for interchangeability and safety of a standardized luminaire supporting coupler
PEL/23 Confirmed (2012)
Reconfirm
BS 7021:1989 Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam
PRI/72 Confirmed (2012)
Reconfirm
BS 7022:1988 Guide for geophysical logging of boreholes for hydrogeological purposes
CPI/113 Confirmed (2012)
Reconfirm
BS 7028:1999 Eye protection for industrial and other uses. Guidance on selection, use and maintenance
PH/2 Confirmed (2012)
Reconfirm
BS 7033-1:1989
Cleaning and polishing cloths -- Specification for optical polishing cloths for use on transparent plastics panels
TCI/66 Confirmed (2012)
Reconfirm
BS 7067:1990 Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants
PTI/16 Confirmed (2012)
Reconfirm
BS 7068:1989 Specification for alternating pressure air mattresses CH/100 Confirmed (2012)
Reconfirm
BS 7071:1992 Specification for portable residual current devices PEL/23 Confirmed (2012)
Reconfirm
BS 7074-1:1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for domestic heating and hot water supply
RHE/7 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 39 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7074-2:1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for low and medium temperature hot water heating systems
RHE/7 Confirmed (2012)
Reconfirm
BS 7074-3:1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems -- Code of practice for chilled and condenser systems
RHE/7 Confirmed (2012)
Reconfirm
BS 7116:1990 Specification for double sided pressure sensitive adhesive tapes
PKW/0 Confirmed (2012)
Reconfirm
BS 7121-11:1998
Code of practice for safe use of cranes -- Offshore cranes
MHE/3/11 Confirmed (2012)
Reconfirm
BS 7121-12:1999
Code of practice for safe use of cranes -- Recovery vehicles and equipment. Code of practice
MHE/3/11 Confirmed (2012)
Reconfirm
BS 7121-2-1:2012
Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. General
MHE/3/11 Current Confirm
BS 7121-2-3:2012
Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. Mobile cranes
MHE/3/11 Current Confirm
BS 7121-2-5:2012
Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. Tower cranes
MHE/3/11 Current Confirm
BS 7143:1989 Specification for catheter mounts (flexible adaptors) for use with medical breathing systems
CH/121/5 Confirmed (2012)
Reconfirm
BS 7164-22.1:1994
Chemical tests for raw and vulcanized rubber. Determination of chlorine content -- Parr bomb method
PRI/22 Confirmed (2012)
Reconfirm
BS 7167:1990 Specification for Bordeaux connections MHE/1 Confirmed (2012)
Reconfirm
BS 7181:1989 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes
B/504 Confirmed (2012)
Reconfirm
BS 7184:2001 Selection, use and maintenance of chemical protective clothing. Guidance
PH/3/3 Confirmed (2012)
Reconfirm
BS 7209:1990 Specification for water vapour permeable apparel fabrics
TCI/66 Confirmed (2012)
Reconfirm
BS 7211:2012 Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
GEL/20/17 Current Confirm
BS 7227:1990 Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards
IST/17 Confirmed (2012)
Reconfirm
BS 7254-3:1990
Orthopaedic implants -- Recommendations for care and handling
CH/150/5 Confirmed (2012)
Reconfirm
BS 7254-4:1990
Orthopaedic implants -- Recommendations for retrieval and examination of implants and associated tissues
CH/150/5 Confirmed (2012)
Reconfirm
BS 7255:2012 Code of practice for safe working on lifts MHE/4 Current Reconfirm
BS 7262:1990 Specification for automatic safe load indicators MHE/3/11 Confirmed (2012)
Reconfirm
BS 7289:1990 Specification for dimensions of three-piece tinplate aerosol cans
PKW/0/-/8 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 40 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7310:1990 Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution
LBI/16 Confirmed (2012)
Reconfirm
BS 7319-6:1990
Analysis of sodium chloride for industrial use -- Method for determination of cadmium content
CII/26 Confirmed (2012)
Reconfirm
BS 7319-7:1990
Analysis of sodium chloride for industrial use -- Method for determination of copper content
CII/26 Confirmed (2012)
Reconfirm
BS 7319-8:1990
Analysis of sodium chloride for industrial use -- Method for determination of lead content
CII/26 Confirmed (2012)
Reconfirm
BS 7319-9:1990
Analysis of sodium chloride for industrial use -- Method for determination of mercury content
CII/26 Confirmed (2012)
Reconfirm
BS 7319-10:1990
Analysis of sodium chloride for industrial use -- Method for determination of pH and total alkalinity
CII/26 Confirmed (2012)
Reconfirm
BS 7319-11:1990
Analysis of sodium chloride for industrial use -- Method for determination of iron content
CII/26 Confirmed (2012)
Reconfirm
BS 7323:1990 Specification for sit harnesses for rock climbing SW/136/5 Confirmed (2012)
Reconfirm
BS 7327-1:1990
Small fixed fire extinguishers -- Specification for small fixed halon fire extinguishers
FSH/18 Confirmed (2012)
Reconfirm
BS 7339:1990 Code of practice for supplementary checking of metallic materials of construction in pressurized systems
PVE/1 Confirmed (2012)
Reconfirm
BS 7346-5:2005
Components for smoke and heat control systems -- Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice
FSH/25 Confirmed (2012)
Reconfirm
BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
PSE/18/2 Confirmed (2012)
Reconfirm
BS 7351:1990 Specification for metal-sheathed heating elements for industrial use
PEL/27 Confirmed (2012)
Reconfirm
BS 7357:1990 Specification for 7.5 L WC flushing cisterns B/503 Confirmed (2012)
Reconfirm
BS 7379:1991 Specification for plastics/metal laminate collapsible tubes
PKW/0 Confirmed (2012)
Reconfirm
BS 7394-2:2007
Complete spectacles -- Specification for prescription spectacles
CH/172 Confirmed (2012)
Reconfirm
BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
CPI/30 Confirmed (2012)
Reconfirm
BS 7419:2012 Specification for holding down bolts FME/9 Current Confirm
BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
RHE/31 Confirmed (2012)
Reconfirm
BS 7438:1991 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
PSE/18/2 Confirmed (2012)
Reconfirm
BS 7442-0:1991
Rubber or plastics covered rollers -- Introduction PRI/73 Confirmed (2012)
Reconfirm
BS 7448-1:1991
Fracture mechanics toughness tests -- Method for determination of KIc, critical CTOD and critical J values of metallic materials
ISE/101 Current Confirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 41 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
PRI/72 Confirmed (2012)
Reconfirm
BS 7521:1992 Specification for electronic messaging enabling the application of BS ISO/IEC 10021 in the United Kingdom
IST/6 Confirmed (2012)
Reconfirm
BS 7530-1:1992
Methods for froth flotation testing of hard coal -- Laboratory procedure
PTI/16 Confirmed (2012)
Reconfirm
BS 7530-2:1995
Methods for froth flotation testing of hard coal -- Evaluation of flotation characteristics
PTI/16 Confirmed (2012)
Reconfirm
BS 7539:1992 Methods for test for determination of properties of cushioning materials for package design purposes
PKW/0 Confirmed (2012)
Reconfirm
BS 7540-3:2005
Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V -- National standard cables not included in HD 21 and HD 22
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7542:1992 Method of test for curing compounds for concrete B/517/1 Confirmed (2012)
Reconfirm
BS 7558:1992 Specification for gun cabinets GW/2 Confirmed (2012)
Reconfirm
BS 7582:2005 Code of practice for reconditioning of used safes GW/2 Confirmed (2012)
Reconfirm
BS 7591-1:1992
Porosity and pore size distribution of materials -- Method of evaluation by mercury porosimetry
LBI/37 Confirmed (2012)
Withdraw
BS 7591-4:1993
Porosity and pore size distribution of materials -- Method of evaluation by liquid expulsion
LBI/37 Confirmed (2012)
Reconfirm
BS 7593:2006 Code of practice for treatment of water in domestic hot water central heating systems
CII/62 Confirmed (2012)
Reconfirm
BS 7611:1992 Specification for potato storage boxes for mechanical handling
PKW/0/-/11 Confirmed (2012)
Reconfirm
BS 7649:1993 Guide to the design and preparation of documentation for users of application software
IST/15 Confirmed (2012)
Withdraw
BS 7655-0:2006
Specification for insulating and sheathing materials for cables -- General introduction
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-1.2:1997
Specification for insulating and sheathing materials for cables -- General 90$0DC application
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-1.3:2000
Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds -- Sec1.3 XLPE
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-1.5:2000
Specification for insulating and sheathing materials for cables -- Flame retardant composites
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-2.3:2000
Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds -- General application
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-2.6:2000
Specification for insulating and sheathing materials for cables -- Sheathing compounds for ships' wiring and offshore applications
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-3.2:2000
Specification for insulating and sheathing materials for cables. PVC insulating compounds -- Hard grade types
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-4.2:2000
Specification for insulating and sheathing materials for cables. PVC sheathing compounds -- General application
GEL/20/17 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 42 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7655-6.1:1997
Specification for insulating and sheathing materials for cables -- General application thermoplastic types
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7655-10.1:2000
Specification for insulating and sheathing materials for cables -- Thermoplastic medium density polyethylene (MDPE) sheathing compound
GEL/20/17 Confirmed (2012)
Reconfirm
BS 7660:1993 Specification for safety pins for general use TCI/66 Confirmed (2012)
Reconfirm
BS 7666-0:2006
Spatial datasets for geographical referencing -- General model for gazetteers and spatial referencing
IST/36 Confirmed (2012)
Reconfirm
BS 7666-1:2006
Spatial datasets for geographical referencing -- Specification for a street gazetteer
IST/36 Confirmed (2012)
Reconfirm
BS 7666-2:2006
Spatial datasets for geographical referencing -- Specification for a land and property gazetteer
IST/36 Confirmed (2012)
Reconfirm
BS 7666-5:2006
Spatial datasets for geographical referencing -- Specification for a delivery point gazetteer
IST/36 Confirmed (2012)
Reconfirm
BS 7669-3:1994
Vehicle restraint systems -- Guide to the installation, inspection and repair of safety fences
B/509 Confirmed (2012)
Reconfirm
BS 7670-1:1993
Steel nuts and bolts for resistance projection welding. -- Specification for dimensions and properties
FME/9 Confirmed (2012)
Reconfirm
BS 7715:1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
FME/9 Confirmed (2012)
Reconfirm
BS 7724:1994 Specification for split pins (metric series) FME/9 Confirmed (2012)
Reconfirm
BS 7727:1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm$u2
GEL/20/11 Confirmed (2012)
Reconfirm
BS 7738-1:1994
Specification for information systems products using SSADM (Structured Systems Analysis and Design Method) -- Implementation of SSADM version 4
IST/15 Confirmed (2012)
Withdraw
BS 7751-1:1994
Prevailing torque type wire thread inserts -- Specification for ISO metric coarse pitch threads
FME/9 Confirmed (2012)
Reconfirm
BS 7751-2:1994
Prevailing torque type wire thread inserts -- Specification for ISO metric fine pitch threads
FME/9 Confirmed (2012)
Reconfirm
BS 7752-2:1994
Free running type wire thread inserts -- Specification for ISO metric fine pitch threads
FME/9 Confirmed (2012)
Reconfirm
BS 7753:1994 Specification for performance of prevailing torque wire thread inserts
FME/9 Confirmed (2012)
Reconfirm
BS 7754:1994 Code of practice for garment evaluation by wearer trials
TCI/24 Confirmed (2012)
Reconfirm
BS 7764:1994 Specification for hexagon slotted nuts and castle nuts FME/9 Confirmed (2012)
Reconfirm
BS 7776:1995 Glossary of torque terminology for threaded fasteners FME/9 Confirmed (2012)
Reconfirm
BS 7793-1:1995
Vitreous enamel coatings for use on bolted steel panels -- Specification for coatings on bolted steel panels for use in agricultural slurry tanks
STI/36 Confirmed (2012)
Reconfirm
BS 7795:1995 Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
FME/9 Confirmed (2012)
Reconfirm
BS 7814:1995 Specification for bolts and screws incorporating either underhead locking or anti-rotation features
FME/9 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 43 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7818:1995 Specification for pedestrian restraint systems in metal B/509/1 Confirmed (2012)
Reconfirm
BS 7835:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
GEL/20/16 Confirmed (2012)
Reconfirm
BS 7838:1996 Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50
GSE/42 Confirmed (2012); Partially replaced by BS EN 15266:2007
Confirm
BS 7842:1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
FME/9 Confirmed (2012)
Reconfirm
BS 7843-3:2012
Acquisition and management of meteorological precipitation data from a gauge network -- Code of practice for the design and manufacture of storage and automatic collecting raingauges
CPI/113 Current Confirm
BS 7843-4:2012
Acquisition and management of meteorological precipitation data from a raingauge network -- Guide for the estimation of areal rainfall
CPI/113 Current Confirm
BS 7850-1:1992
Total quality management -- Guide to management principles
QS/1 Confirmed (2012)
Reconfirm
BS 7852:1997 Code of practice for design of canoes and kayaks GME/33 Confirmed (2012)
Reconfirm
BS 7858:2012 Security screening of individuals employed in a security environment. Code of practice
GW/3/-/9 Current Confirm
BS 7861-1:2007
Strata reinforcement support system components used in coal mines -- Specification for rockbolting
MRE/1 Confirmed (2012)
Reconfirm
BS 7870-3.10:2001
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV -- PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
GEL/20/16 Confirmed (2012)
Reconfirm
BS 7870-3.20:2001
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV -- PVC insulated split concentric cables with copper or aluminium conductors
GEL/20/16 Confirmed (2012)
Reconfirm
BS 7871-2:1998
Pneumatic conveying -- Glossary of equipment MHE/9 Confirmed (2012)
Reconfirm
BS 7873:1996 Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
ISE/110 Confirmed (2012)
Reconfirm
BS 7885:1997 Code of practice for safe entry into silos MHE/9 Confirmed (2012)
Reconfirm
BS 7889:2012 Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
GEL/20/17 Current Confirm
BS 7895:1997 Specification for bayonet lampholders with enhanced safety
CPL/34/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 44 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7896:1997 Securities. Specification for the format and structure of names and addresses used in securities transactions for the business of registrars
IST/12 Confirmed (2012)
Reconfirm
BS 7901:2002 Specification for recovery vehicles and vehicle recovery equipment
MHE/3/-/14 Confirmed (2012)
Confirm
BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods
FSH/21 Confirmed (2012)
Reconfirm
BS 7905-1:2001
Lifting equipment for performance, broadcast and similar applications -- Specification for the design and manufacture of above stage equipment (excluding trusses and towers)
MHE/3/13 Confirmed (2012)
Reconfirm
BS 7905-2:2000
Lifting equipment for performance, broadcast and similar applications -- Specification for design and manufacture of aluminium and steel trusses and towers
MHE/3/13 Confirmed (2012)
Reconfirm
BS 7906-1:2005
Use of lifting equipment for performance, broadcast and similar applications -- Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers)
MHE/3/13 Confirmed (2012)
Reconfirm
BS 7906-2:2000
Lifting equipment for performance, broadcast and similar applications -- Code of practice for use of aluminium and steel trusses and towers
MHE/3/13 Confirmed (2012)
Reconfirm
BS 7907:2007 Code of practice for the design and manufacture of children's clothing to promote mechanical safety
TCI/66/-/2 Confirmed (2012)
Withdraw
BS 7918-1:1999
Visual imperfections in rubber products -- Vocabulary PRI/73 Confirmed (2012)
Reconfirm
BS 7921:1998 Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
PKW/0/-/8 Confirmed (2012)
Reconfirm
BS 7929:1999 Guide for the verification of a pump casing design procedure
MCE/6 Confirmed (2012)
Reconfirm
BS 7951:2000 Electricity meters. Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2
PEL/13 Confirmed (2012)
Reconfirm
BS 7952:2001 Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
RHE/28 Confirmed (2012)
Reconfirm
BS 7955:1999 Containment nets and sheets on construction works. Specification for performance and test methods
B/514/27 Confirmed (2012)
Reconfirm
BS 7959-3:2007
Materials used for the control of liquid spillages -- Colour coding of sorbent materials
CII/63 Confirmed (2012)
Reconfirm
BS 7962:2000 Black materials for masking existing road markings. Specification
B/509/2 Confirmed (2012)
Reconfirm
BS 7970:2012 Electric cables. Metal foil and longitudinally welded aluminium sheath constructions of power cables having XLPE insulation for rated voltages from 66 kV (U$dm = 72.5 kV) to 132 kV (U$dm = 145 kV)
GEL/20/16 Current Confirm
BS 7971-2:2003
Protective clothing and equipment for use in violent situations and in training -- Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
PH/3/12 Confirmed (2012)
Reconfirm
BS 7971-3:2002
Protective clothing and equipment for use in violent situations and in training -- Personal defence shields. Requirements and test methods
PH/3/12 Confirmed (2007)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 45 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 7971-4:2002
Protective clothing and equipment for use in violent situations and in training -- Limb protectors. Requirements and test methods
PH/3/12 Confirmed (2007)
Reconfirm
BS 7971-8:2003
Protective clothing and equipment for use in violent situations and in training -- Blunt trauma torso, shoulder, abdomen and genital protectors. Requirements and test methods
PH/3/12 Current Confirm
BS 7971-11:2006
Protective clothing and equipment for use in violent situations and in training -- Foot and ankle protectors and foot protectors. Requirements and test methods
PH/3/12 Partially replaced by BS 7971-5:2016
Confirm
BS 7973-1:2001
Spacers and chairs for steel reinforcement and their specification -- Product performance requirements
B/525/2 Confirmed (2012)
Reconfirm
BS 7973-2:2001
Spacers and chairs for steel reinforcement and their specification -- Fixing and application of spacers and chairs and tying of reinforcement
B/525/2 Confirmed (2012)
Reconfirm
BS 7974:2001 Application of fire safety engineering principles to the design of buildings. Code of practice
FSH/24 Confirmed (2012)
Reconfirm
BS 7980:2003+A1:2012
Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
MHE/12 Current Confirm
BS 7982:2001 Guidance on the environmental impact of large-scale fires involving plastics materials
PRI/26 Confirmed (2012)
Reconfirm
BS 7983:2001 Requirements for payphones for networks other than the ISDN
TCT/2 Confirmed (2012)
Reconfirm
BS 7989:2001 Specification for recirculatory filtration fume cupboards
LBI/1/1 Confirmed (2012)
Reconfirm
BS 7991:2001 Determination of the mode I adhesive fracture energy, G$dI$dC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens
PRI/52 Confirmed (2012)
Reconfirm
BS 8000-1:1989
Workmanship on building sites -- Code of practice for excavation and filling
B/526 Confirmed (2012); Partially replaced by BS 8000-0:2014
Reconfirm
BS 8000-4:1989
Workmanship on building sites -- Code of practice for waterproofing
B/546 Confirmed (2012); Partially replaced by BS 8000-0:2014
Confirm
BS 8000-8:1994
Workmanship on building sites -- Code of practice for plasterboard partitions and dry linings
B/544 Confirmed (2012); Partially replaced by BS 8000-0:2014
Reconfirm
BS 8000-9:2003
Workmanship on building sites -- Cementitious levelling screeds and wearing screeds. Code of practice
CB/300 Confirmed (2012); Partially replaced by BS 8000-0:2014
Confirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 46 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 8000-12:1989
Workmanship on building sites -- Code of practice for decorative wallcoverings and painting
B/209 Confirmed (2012); Partially replaced by BS 8000-0:2014
Confirm
BS 8000-15:1990
Workmanship on building sites -- Code of practice for hot and cold water services (domestic scale)
B/504 Confirmed (2012); Partially replaced by BS 8000-0:2014
Reconfirm
BS 8010-2.5:1989
Code of practice for pipelines. Pipelines on land: design, construction and installation -- Glass reinforced thermosetting plastics
PSE/17/2 Confirmed (2012)
Reconfirm
BS 8210:2012 Guide to facilities maintenance management FMW/1 Current Confirm
BS 8212:1995 Code of practice for dry lining and partitioning using gypsum plasterboard
B/544 Confirmed (2012)
Reconfirm
BS 8213-1:2004
Windows doors and rooflights -- Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice
B/538/1 Confirmed (2012)
Reconfirm
BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice
B/546 Confirmed (2012)
Reconfirm
BS 8220-2:1995
Guide for security of buildings against crime -- Offices and shops
B/562 Confirmed (2012)
Reconfirm
BS 8221-1:2012
Code of practice for cleaning and surface repair of buildings -- Cleaning of natural stone, brick, terracotta and concrete
B/560 Current Confirm
BS 8221-2:2000
Code of practice for cleaning and surface repair of buildings -- Surface repair of natural stones, brick and terracotta
B/560 Confirmed (2012)
Reconfirm
BS 8313:1997 Code of practice for accommodation of building services in ducts
B/209 Confirmed (2012)
Reconfirm
BS 8410:2007 Code of practice for lightweight temporary cladding for weather protection and containment on construction works
B/514/27 Confirmed (2012)
Reconfirm
BS 8415:2005+A2:2012
Monuments within burial grounds and memorial sites. Specification
B/545 Current Confirm
BS 8424:2004 Building hardware. Pull handles. Requirements and test methods
B/538/4 Confirmed (2012)
Reconfirm
BS 8430:2005 Terminology work. Fundamentals made simple TS/1 Confirmed (2012)
Reconfirm
BS 8437:2005+A1:2012
Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
PH/5 Current Confirm
BS 8445:2012 Bath and shower mats. Testing. Assessment of slip resistance properties
PRI/60 Current Confirm
BS 8450:2006 Code of practice for installation of electrical and electronic equipment in ships
JPEL/18 Confirmed (2012)
Reconfirm
BS 8467:2006 Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods
PH/3/3 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 47 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 8468-7:2012
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Closed-circuit breathing apparatus. Specification
PH/4 Current Confirm
BS 8469:2007 Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
PH/14 Confirmed (2012)
Reconfirm
BS 8471:2007 Guide to particle sizing methods LBI/37 Confirmed (2012)
Reconfirm
BS 8475:2006 Instrumental colour measurement of textiles. Method TCI/81 Confirmed (2012)
Reconfirm
BS 8476:2007 Code of practice for the safe use of concrete pumps B/513/-/8 Confirmed (2012)
Reconfirm
BS 8490:2007 Guide to siphonic roof drainage systems B/505 Confirmed (2012)
Reconfirm
BS 8496:2007 Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
EH/3/4 Confirmed (2012)
Reconfirm
BS 8501:2002 PDF
Graphical symbols and signs. Public information symbols
PH/8/2 Current Withdraw
BS 8539:2012 Code of practice for the selection and installation of post-installed anchors in concrete and masonry
B/514 Current Confirm
BS 8541-1:2012
Library objects for architecture, engineering and construction -- Identification and classification. Code of practice
B/555 Current Confirm
BS 8541-3:2012
Library objects for architecture, engineering and construction -- Shape and measurement. Code of practice
B/555 Current Confirm
BS 8541-4:2012
Library objects for architecture, engineering and construction -- Attributes for specification and assessment. Code of practice
B/555 Current Confirm
BS 8552:2012 Sampling and monitoring of water from building services closed systems. Code of practice
EH/3/6 Current Confirm
BS 8560:2012 Code of practice for the design of buildings incorporating safe work at height
B/209 Current Confirm
BS 8567:2012 Specification for outdoor electricity meter cupboards PEL/13 Current Confirm
BS 8573:2012 Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire
GEL/20/17 Current Reconfirm
BS 8577:2012 Framework for the provision of financial advice and planning services. Specification
SVS/6/1 Current Confirm
BS 8581-1:2012
Exchanging course related information -- Course advertising profile. Specification
IST/43 Current Confirm
BS 8581-2:2012
Exchanging course related information -- Course advertising profile. Code of practice
IST/43 Current Confirm
BS 8587:2012 Guide to facility information management FMW/1 Current Confirm
BS 8621:2007+A2:2012
Thief resistant lock assembly. Keyless egress B/538 Current Confirm
BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
B/546 Confirmed (2012)
Revision
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 48 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 8855-2:2000
Soil analysis -- Method for determination of coal tar-derived phenolic compounds
EH/4 Confirmed (2012)
Reconfirm
BS 8887-1:2006
Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- General concepts, process and requirements
TDW/4 Confirmed (2012)
Reconfirm
BS 8887-211:2012
Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- Specification for reworking and remarketing of computing hardware
TDW/4/7 Current Confirm
BS 9133 N001 to 003:1975
Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level
EPL/40X Confirmed (2012)
Reconfirm
BS 9210 N007-2:1976
Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings -- Control drawings. Mating face details and gauge information
EPL/46 Confirmed (2012)
Reconfirm
BS 9210 N0009-2:1978
Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling -- Control drawings. Mating face details and gauge information
EPL/46 Confirmed (2012)
Reconfirm
BS 9220 N001:1971
Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category
EPL/46 Confirmed (2012)
Reconfirm
BS 9220 N002:1971
Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category
EPL/46 Confirmed (2012)
Reconfirm
BS 9220 N003:1971
Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category
EPL/46 Confirmed (2012)
Reconfirm
BS 9220 N004:1971
Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category
EPL/46 Confirmed (2012)
Reconfirm
BS 9222:2007 Personal financial planning. Guidance on the application of BS ISO 22222 and assessment of compliance
SVS/6 Confirmed (2012)
Reconfirm
BS 10621:2007+A2:2012
Thief resistant dual-mode lock assembly B/538 Current Confirm
BS 2A 27:1962 Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS A 55 AND 56:1951+A3:2012
Specifications for grub screws for aeronautical purposes
ACE/12 Current Reconfirm
BS A 101:1969+A3:2012
Specification for general requirements for titanium bolts
ACE/12 Current Reconfirm
BS 4A 102:2002+A2:2012
Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
ACE/12 Current Reconfirm
BS 3A 103:1962
Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 49 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4A 104:2002+A2:2012
Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads), strength class 880 MPa, for aircraft
ACE/12 Current Reconfirm
BS 3A 105:1962
Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS 3A 107:1962
Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
ACE/12 Confirmed (2012)
Revision
BS 4A 111:1993
Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks
ACE/12 Confirmed (2012)
Reconfirm
BS 4A 112:1992
Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)
ACE/12 Confirmed (2012)
Revision
BS 4A 113:1999+A1:2012
Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive bolts
ACE/12 Current Reconfirm
BS 4A 116:2012
Steel pan head bolts (Unified threads), cadmium plated, for aircraft
ACE/12 Current Reconfirm
BS 4A 169:2002
Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS 4A 170:1999+A1:2012
Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
ACE/12 Current Reconfirm
BS 2A 173:1962+A7:2012
Specification for 100$0D Countersunk head steel bolts (Unified threads), cadmium plated, for aircraft
ACE/12 Current Confirm
BS 3A 174:2012
100$0D Countersunk head, D-slot recess, corrosion-resisting steel bolts (Unified threads), Strength Class 880 MPa, for aircraft
ACE/12 Current Reconfirm
BS 2A 175:1962
Specification for 100$0D countersunk head aluminium alloy bolts (Unified threads) for aircraft
ACE/12 Confirmed (2012)
Revision
BS 2A 210:1962
Specification for brass nuts (Unified hexagons and Unified threads) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS A 226:1965 Specification for steel hexagon head bolts (short thread: Class 3A)
ACE/12 Confirmed (2012)
Reconfirm
BS A 227:1965 Specification for steel pan head bolts (short thread: Class 3A)
ACE/12 Confirmed (2012)
Reconfirm
BS 4A 228:1997
Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in$u2) for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS 2A 229:1972
Specification for hexagonal head steel bolts 160000 lbf/in$u2 (1100/MPa)
ACE/12 Confirmed (2012)
Reconfirm
BS 2A 230:1974
Specification for 100$0D countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses]
ACE/12 Confirmed (2012)
Reconfirm
BS A 237-240:1971
Specification for plain hexagonal nut (of Class 3B UNJ thread)
ACE/12 Confirmed (2012)
Reconfirm
BS A 242; A 243; A 244; A 245:1974
Specification for hexagonal castle nuts (of Class 3B UNJ thread)
ACE/12 Confirmed (2012)
Reconfirm
BS A 246; A 247; A 248; A 249:1974
Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
ACE/12 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 50 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS A 250; A 251; A 252; A 253:1974
Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
ACE/12 Confirmed (2012)
Reconfirm
BS C 3:1964 Specification for aircraft material. Coupling dimensions for aircraft pressure re-oiling connection
ACE/1 Confirmed (2012)
Reconfirm
BS 2C 4:1973 Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
ACE/1 Confirmed (2012)
Reconfirm
BS 2C 5:1976 Specification for mating dimensions for liquid oxygen replenishment couplings
ACE/12 Confirmed (2012)
Reconfirm
BS C 6:1966 Specification for aircraft engine nacelle fire extinguisher doors
ACE/12 Confirmed (2012)
Reconfirm
BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft
ACE/1 Confirmed (2012)
Reconfirm
BS C 10:1958 Coupling dimensions for aircraft ground air-conditioning connections
ACE/12 Confirmed (2012)
Reconfirm
BS 2C 13:1988 Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
ACE/12 Confirmed (2012)
Reconfirm
BS C 15:1960 Specification for coupling dimensions for aircraft-to-tractor tow bar connections
ACE/57 Confirmed (2012)
Reconfirm
BS C 16:1973 Specification for dimensions for gaseous oxygen replenishment couplings for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS C 17:1973 Specification for coupling dimensions for low pressure air connections for engine starting
ACE/12 Confirmed (2012)
Reconfirm
BS C 20:1986 Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)
ACE/12 Confirmed (2012)
Reconfirm
BS 6F 49:2007 Specification for shuttle woven cotton webbing for aerospace purposes
ACE/65 Confirmed (2012)
Reconfirm
BS 3F 63:1981 Specification for low pressure oxygen hose for aeronautical purposes
ACE/65 Confirmed (2012)
Reconfirm
BS 3F 65:1991 Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)
ACE/65 Confirmed (2012)
Reconfirm
BS 2F 66:1982 Specification for rubber bonded cork sheets ACE/65 Confirmed (2012)
Reconfirm
BS 2F 67:1980 Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes
ACE/65 Confirmed (2012)
Reconfirm
BS 4F 68:2002 Controlled storage of vulcanized rubbers for use in aerospace applications
ACE/65 Confirmed (2012)
Reconfirm
BS 3F 69:1979 Specification for packaging and identification of vulcanized rubber items
ACE/65 Confirmed (2012)
Reconfirm
BS 3F 70:1991 Specification for heavy duty braided rubber cord ACE/65 Confirmed (2012)
Reconfirm
BS 3F 71:1991 Specification for light duty braided rubber cord ACE/65 Confirmed (2012)
Reconfirm
BS 4F 111:2002
Flax harness webbing for aerospace purposes ACE/65 Confirmed (2012)
Reconfirm
BS 3F 114:1995
Specification for 80 g/m$u2 cotton madapolam fabric ACE/65 Confirmed (2012)
Reconfirm
BS 3F 116:1995
Specification for mercerized cotton fabric ACE/65 Confirmed (2012)
Reconfirm
BS 5F 118:2002
50 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 51 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 4F 119:2002
145 g/m$u2 to 235 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)
Reconfirm
BS 3F 126:2002
35 g/m$u2 nylon parachute fabric ACE/65 Confirmed (2012)
Reconfirm
BS F 137:1989 Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies
ACE/65 Confirmed (2012)
Reconfirm
BS F 138:1991 Specification for polyester plain (bobbin) netting suitable for aerospace purposes
ACE/65 Confirmed (2012)
Reconfirm
BS F 140:1991 Glossary of parachute terms ACE/65 Confirmed (2012)
Reconfirm
BS 2F 151:2007
Specification for shuttleless woven cotton webbing for aerospace purposes
ACE/65 Confirmed (2012)
Reconfirm
BS 2G 112:1956
Specification for air-driven directional gyroscopes for aircraft
ACE/1 Confirmed (2012)
Reconfirm
BS 2G 113:1956
Specification for manifold pressure gauges for aircraft ACE/1 Confirmed (2012)
Reconfirm
BS 2G 127:1967
Specification for power and current transformers for use in aircraft electrical power supply systems
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 132:1981
Specification for general requirements for electromagnetically operated contactors for aircraft
ACE/6 Confirmed (2012)
Reconfirm
BS G 174:1959
Invertors for secondary electrical supplies for aircraft ACE/1 Confirmed (2012)
Reconfirm
BS G 175:1959
Aircraft fuel nozzle grounding plugs and sockets ACE/6 Confirmed (2012)
Reconfirm
BS 5G 178-1:1993
Crimped joints for aircraft electrical cables and wires. -- Specification for design requirements (including tests) for components and tools
ACE/6 Confirmed (2012)
Reconfirm
BS 4G 178-2:1986
Crimped joints for aircraft electrical cables and wires -- Specification for control of crimping (including user control tests)
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 180:1974
Specification for permanent splicing of aircraft electrical cables
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 191:1988
Specification for lighting for aircraft indicators using integral filament lamps
ACE/1 Confirmed (2012)
Reconfirm
BS G 193:1966
Specification for aircraft lampholders ACE/6 Confirmed (2012)
Reconfirm
BS 2G 196:1971
Specification for static invertors ACE/6 Confirmed (2012)
Reconfirm
BS 3G 197:1982
Specification for stud-type terminal blocks for terminations on aircraft electric cables
ACE/6 Confirmed (2012)
Reconfirm
BS 4G 198-1:1997
Sleeves for aircraft electric cables and equipment wires -- Specification for elastomeric sleeves for binding and identification
ACE/6 Confirmed (2012)
Reconfirm
BS 3G 198-2:1997
Sleeves for aircraft electric cables and equipment wires -- Specification for slip-on sleeves for identification purposes
ACE/6 Confirmed (2012)
Reconfirm
BS 4G 198-3:1999
Sleeves and moulded components for aircraft electric cables and equipment wires -- Specification for heat-shrinkable sleeving for binding, insulation, and identification
ACE/6/-/8 Confirmed (2012)
Reconfirm
BS 3G 198-4:1996
Sleeves for aircraft electric cables and equipment wires -- Specification for fluoropolymer heat shrinkable sleeving for binding and insulation
ACE/6 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 52 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS G 198-5:1997
Sleeves and moulded components for aircraft electric cables and equipment wires -- Specification for heat shrinkable moulded shapes
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 201:1996
Specification for counter and pointer pressure altimeters
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 202:1988
Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
ACE/6 Confirmed (2012)
Reconfirm
BS G 203:1967
Specification for Unified screws with captive facing and locking washers
ACE/12 Confirmed (2012)
Reconfirm
BS G 207:1969
Specification for aircraft electrical circuit diagrams ACE/6 Confirmed (2012)
Reconfirm
BS G 209:1970
Specification for transformer rectifier units ACE/6 Confirmed (2012)
Reconfirm
BS 3G 210:1996
Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190$0DC) or nickel plated copper conductors (260$0DC)
ACE/6 Confirmed (2012)
Reconfirm
BS G 212:1971
Specification for general requirements for aircraft electrical cables
ACE/6 Confirmed (2012)
Reconfirm
BS G 217:1975
Specification for general requirements for cockpit lighting controllers
ACE/6 Confirmed (2012)
Reconfirm
BS G 222:1976
Specification for Efglas type electric cables (metric units)
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 223:1989
Specification for screen terminating devices for aircraft electric cables
ACE/6 Confirmed (2012)
Reconfirm
BS 3G 230:2000
Specification for general requirements for aircraft electrical cables (second series)
ACE/6/-/2 Confirmed (2012)
Reconfirm
BS 2G 232:1987
Specification for electric cables for general airframe or equipment interconnect use (135$0DC), wrapped insulation
ACE/6 Confirmed (2012)
Reconfirm
BS 3G 233:1990
Specification for electric cables for general airframe or equipment interconnect use (135$0DC), extruded insulation
ACE/6 Confirmed (2012)
Reconfirm
BS G 235:1987
Specification for electric cables for general airframe or equipment interconnect use (150$0DC), wrapped insulation with silver plated conductors
ACE/6 Confirmed (2012)
Reconfirm
BS G 236:1987
Specification for electric cables for general airframe or equipment interconnect use (200$0DC), wrapped insulation with nickel plated conductors
ACE/6 Confirmed (2012)
Reconfirm
BS G 237:1987
Specification for electric cables for general airframe or equipment interconnect use (200$0DC), extruded insulation with nickel plated conductors
ACE/6 Confirmed (2012)
Reconfirm
BS 2G 238:1996
Specification for electric cables for general airframe or equipment interconnect use (260$0DC), nickel plated copper and copper alloy conductors, with wrapped insulation
ACE/6 Confirmed (2012)
Reconfirm
BS G 241:1988
Specification for fire proof electric cables for engine fire zone and airframe use
ACE/6 Confirmed (2012)
Reconfirm
BS G 242:1989
Specification for data bus interconnecting systems ACE/6 Confirmed (2012)
Reconfirm
BS G 243:1990
Specification for igniter cables for engine use (4 kV d.c.)
ACE/6 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 53 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS G 244:1989
Code of practice for installation/repair of aircraft electrical interconnection systems
ACE/6 Confirmed (2012)
Reconfirm
BS G 247-1:1992
Locator lights for airborne applications -- Specification for lifejacket lights
ACE/6 Confirmed (2012)
Reconfirm
BS G 247-2:1995
Locator lights for airborne applications -- Specification for liferaft lights
ACE/6 Confirmed (2012)
Reconfirm
BS 3HR 2:2010+A2:2012
Specification for nickel-chromium-cobalt-titanium-aluminiumheat-resistin g alloy billets, bars, forgings and parts (Nickel base, Cr19.5, Co 18.0 , Ti 2.5, Al 1.5)
ACE/61/-/48
Current Reconfirm
BS HC 7:1974 Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS HC 8:1974+A2:2012
Specification for 3% chromium-molybdenum steel castings (1150–1300 MPa)
ACE/61 Current Reconfirm
BS HC 9:1974+A2:2012
Specification for Nickel-chromium-molybdenum steel castings (880–1080 MPa)
ACE/61 Current Reconfirm
BS HC 10:1974
Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 4HR 100:2010+A1:2012
Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
ACE/61 Current Reconfirm
BS HC 103:1974
Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS HC 106:1974
Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS HR 251:1974
Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
ACE/61/-/48
Confirmed (2012)
Reconfirm
BS HC 502:1981
Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)
ACE/61/-/16
Confirmed (2012)
Reconfirm
BS 4J 10:1991 Specification for pressure-sensitive adhesive water resistant PVC tape
ACE/65 Confirmed (2012)
Reconfirm
BS 4J 11:1991 Specification for pressure-sensitive adhesive paper masking tape
ACE/65 Confirmed (2012)
Reconfirm
BS L 164:1978 Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
ACE/61/-/24
Confirmed (2012)
Reconfirm
BS L 165:1978 Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
ACE/61/-/24
Confirmed (2012)
Reconfirm
BS 2L 169:2002
Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6)
ACE/61/-/24
Confirmed (2012)
Reconfirm
BS M 32:1969 Specification for dimensions of aircraft accessory drives and mounting pads
ACE/12 Confirmed (2012)
Reconfirm
BS M 48:1975 Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series
ACE/69 Confirmed (2012)
Reconfirm
BS 3N 3:2000 Breathing oxygen for airborne applications ACE/1 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 54 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS N 5:1992 Specification for crew portable protective breathing equipment for use during aircraft emergencies
ACE/1 Confirmed (2012)
Reconfirm
BS N 6:1998 Specification for aeromedical portable oxygen concentrator systems. General requirements
ACE/1 Confirmed (2012)
Reconfirm
BS 4N 100-1:1999
Aircraft oxygen systems and equipment -- Design and installation
ACE/1 Confirmed (2012)
Reconfirm
BS 4N 100-2:1999
Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
ACE/1 Confirmed (2012)
Reconfirm
BS 4N 100-3:1999
Aircraft oxygen systems and equipment -- Testing of equipment and systems
ACE/1 Confirmed (2012)
Reconfirm
BS 4N 100-4:1999
Aircraft oxygen systems and equipment -- Guide to the physiological factors
ACE/1 Confirmed (2012)
Reconfirm
BS 4N 100-6:1999
Aircraft oxygen systems and equipment -- Guidance and recommendations on the selection of materials for use with oxygen
ACE/1 Confirmed (2012)
Reconfirm
BS 5N 100-7:2002
Aircraft oxygen systems and equipment -- Guide to cleaning labelling and packaging
ACE/1 Confirmed (2012)
Reconfirm
BS 6SP 4:2000+A3:2012
Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 MPa
ACE/12 Current Reconfirm
BS SP 8:1939+A7:2012
Specification for turnbuckles (tension rod type) for aircraft purposes
ACE/12 Current Confirm
BS SP 18 and 19:1949
Specification for washers for aircraft purposes (primarily for use with timber)
ACE/12 Confirmed (2012)
Reconfirm
BS SP 41-46:1951+A5:2012
Specifications for tab washers for B.A. and B.S.W. hexagons for aircraft
ACE/12 Current Reconfirm
BS 2SP 47:1957
Single coil spring washers for aircraft ACE/12 Confirmed (2012)
Reconfirm
BS SP 49 and BS SP 50:1953+A1:2012
Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable)
ACE/12 Current Confirm
BS SP 51 and 52:1953+A3:2012
Specifications for identification tags for swaged cable-end assemblies. For aircraft
ACE/12 Current Confirm
BS SP 59 and SP 60:1955+A1:2012
Specifications for Spring catches for aeronautical purposes
ACE/12 Current Reconfirm
BS SP 66 and SP 67:1955+A2:2012
Specifications for Cable thimbles for aircraft ACE/12 Current Confirm
BS 7S 80:2002 High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2SP 93:1974
Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use
ACE/12 Confirmed (2012)
Reconfirm
BS 2SP 95:1974
Specification for elastomeric grommets (polychloroprene) for aerospace use
ACE/12 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 55 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS SP 107-112:1954+A5:2012
Specifications for tab washers for unified hexagons for aircraft
ACE/12 Current Reconfirm
BS SP 113:1954
Specification for cadmium plated close tolerance shear pins for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS SP 115 to 117:1956
Specifications for hydraulic surface-check type lubricating nipples for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS SP 119-120:1957+A2:2012
High tensile steel fork joints (Unified threads). For aircraft
ACE/12 Current Reconfirm
BS SP 121:1958
Collars for shear pins for aircraft ACE/12 Confirmed (2012)
Reconfirm
BS SP 134 to SP 138:1968+A1:2012
Specification for Copper beryllium crinkle washers ACE/12 Current Confirm
BS 2S 136:1977
Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS SP 139 and SP 140:1969+A2:2012
Specification for Corrosion-resisting steel crinkle washers
ACE/12 Current Confirm
BS 2S 140:1976
Specification for 2 1/2% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1080-1280 MPa: limiting ruling section 150 mm)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS SP 141:1970
Specification for design and performance requirements for toggle type panel fasteners
ACE/12 Confirmed (2012)
Reconfirm
BS SP 144-147:1971
Specification for corrosion resisting worm drive clamps for aircraft
ACE/12 Confirmed (2012)
Reconfirm
BS 2SP 148-150:1979
Specification for Unified aluminium alloy washers ACE/12 Confirmed (2012)
Reconfirm
BS S 150:1975 Specification for chromium-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (930-1080 MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 151:1975 Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2SP 151-153:1979
Specification for Unified alloy steel washers ACE/12 Confirmed (2012)
Revision
BS S 152:1975 Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2SP 154-156:1979
Specification for Unified corrosion-resistant steel washers
ACE/12 Confirmed (2012)
Reconfirm
BS 2SP 157-163:1973
Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials
ACE/12 Confirmed (2012)
Revision
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 56 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS S 162:1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS SP 164:1978
Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series)
ACE/12 Confirmed (2012)
Reconfirm
BS S 164:2002 1 % Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 3SP 168-169:2002
Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
ACE/65 Confirmed (2012)
Reconfirm
BS 3SP 170-171:2002
Braided rubber cord assemblies for aerospace use ACE/65 Confirmed (2012)
Reconfirm
BS S 206:1999 Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2S 513:1970
Specification for spring steel strip ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 532:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 533:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 534:1969 Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 535:1969 Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS S 538:1975 Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 3T 53:1980 Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 3T 60:1980 Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2T 66:1980 Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2T 68:1980 Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS T 72-T 73:1977
Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS T 76:1978 Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS T 77:1980 Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
ACE/61/-/15
Confirmed (2012)
Reconfirm
BS 2W 11:1967
Specification for aircraft material. Preformed corrosion-resisting steel wire rope
ACE/12 Confirmed (2012)
Reconfirm
BS 2W 12:1989
Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
ACE/12 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 57 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft
ACE/65 Confirmed (2012)
Reconfirm
BS AU 50-1.8:1989
Tyres and wheels. Tyres. -- Code of practice for the storage of tyres, inner tubes and flaps
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-1.0d:1998
Tyres and wheels. Tyres -- General AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-1.5.1:1994
Tyres and wheels. Tyres. Industrial vehicle tyres -- Specification for code-designated series tyres
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-2.6a:1983
Tyres and wheels. Wheels and rims -- Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-2.8a:1985
Tyres and wheels. Wheels and rims -- Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers)
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-2.3:1994
Tyres and wheels. Wheels and rims -- Specification for road-wheel nuts, studs and bolts for commercial vehicles
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-2.7a:1995
Tyres and wheels. Wheels and rims -- Code of practice for the selection and care of tyres and wheels for commercial vehicles
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-2.5c:1996
Tyres and wheels. Wheels and rims -- Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-3.7:1985
Tyres and wheels. Valves -- Section 7: Code of practice for the selection and care of tyre inflation valves for passenger cars (including cartavens and light vehicles
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-3.8:1985
Tyres and wheels. Valves -- Section 8a: Code of practice for the selection and care of tyre inflation valves for commercial vehicles
AUE/4 Confirmed (2012)
Reconfirm
BS AU 50-4.5.1:1995
Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rims -- Specification for rim profiles and dimensions for code-designated series tyres
AUE/4 Confirmed (2012)
Reconfirm
BS AU 88a:1985
Recommendations for ratings for light duty cables for automobile use
AUE/16 Confirmed (2012)
Reconfirm
BS AU 110a:1995
Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
PRI/66 Confirmed (2012)
Reconfirm
BS AU 138b:2000
Towing vehicle, trailer and semi-trailer pneumatic braking systems. "Contact" type couplings
AUE/15 Confirmed (2012)
Reconfirm
BS AU 144f:1988
Specification for retreaded car and commercial vehicle tyres
AUE/3 Confirmed (2012)
Reconfirm
BS AU 193a:1990
Specification for replacement motor cycle and moped exhaust systems
AUE/9 Confirmed (2012)
Reconfirm
BS AU 237a:1993
Specification for light domestic duty jumper lead sets for automotive starting
AUE/9 Confirmed (2012)
Reconfirm
BS AU 251:1994
Specification for performance of automotive laminated windscreen repair systems
AUE/1 Confirmed (2012)
Reconfirm
BS AU 258:1995
Specification for elasticated straps AUE/9 Confirmed (2012)
Reconfirm
BS MA 5:1970 Specification for brass service nameplates for valves SME/32 Confirmed (2012)
Reconfirm
BS MA 25:1973
Specification for ships' windows SME/32 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 58 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
BS MA 28:1973
Specification for dimensions of tracks for mast and deck fittings
GME/33 Confirmed (2012)
Reconfirm
BS MA 29:1982
Specification for steel wire rope and strand for yachts GME/33 Confirmed (2012)
Reconfirm
BS MA 41:1975
Specification for two tonne general purpose davits MHE/3/3 Confirmed (2012)
Reconfirm
BS MA 47:1977
Code of practice for ships' cargo blocks MHE/3/-/6 Confirmed (2012)
Reconfirm
BS MA 48:1976
Code of practice for design and operation of ships' derrick rigs
MHE/3/-/6 Confirmed (2012)
Reconfirm
BS MA 57:1975
Specification for ships' deck machinery - rope storage reels
SME/32 Confirmed (2012)
Reconfirm
BS MA 81:1980
Specification for ships' derrick fittings MHE/3/3 Confirmed (2012)
Reconfirm
CP 143-5:1964 Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Zinc
B/542/5 Confirmed (2012)
Reconfirm
CP 143-10:1973
Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units
B/542/5 Confirmed (2012)
Reconfirm
CP 143-12:1970
Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Copper. Metric units
B/542/5 Confirmed (2012)
Reconfirm
CP 143-15:1973
Code of practice for sheet roof and wall coverings -- Code of practice for sheet roof and wall coverings. Aluminium. Metric units
B/542/5 Confirmed (2012)
Reconfirm
CP 342-2:1974 Code of practice for centralized hot water supply -- Buildings other than individual dwellings
B/504 Confirmed (2012)
Reconfirm
CP 3000:1955 Code of practice on the installation and maintenance of underfeed stokers
RHE/22 Confirmed (2012)
Reconfirm
DD 253:2001 Mouthguards for use in sport and recreation. Requirements and test methods
PH/3/11 Confirmed (2015)
Withdraw
DD 263:2010 Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice
GW/1/2 Confirmed (2015)
Withdraw
DD 7971-9:2005
Protective clothing and equipment for use in violent situations and in training -- Training suits and equipment. Requirements and test methods
PH/3/12 Confirmed (2008)
Withdraw
PD 308:1996 Guide to the European standards for engineering drawing in the BS EN series
TDW/4 Confirmed (2012)
Reconfirm
PD 476-3:2012 Classification rules for the end-use application of test results arising from BS 476-3, "Classification and method of test for external fire exposure of roofs"
FSH/22/-/8 Current Confirm
PD 5454:2012 Guide for the storage and exhibition of archival materials
IDT/2/9 Current Confirm
PD 6434:1969 Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances
RHE/28/2 Confirmed (2012)
Reconfirm
PD 6438:1969 A review of present methods for design of bolted flanges for pressure vessels
PVE/1 Confirmed (2012)
Reconfirm
PD 6457:1970 Guide to the application of addendum modification to involute spur and helical gears
MCE/5 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 59 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
PD 6470:1981 The management of design for economic production. Standardization philosophy aimed at improving the performance of the electrical and mechanical manufacturing sectors
TDW/4/7 Confirmed (2012)
Reconfirm
PD 6494:1980 Mismatch of screw thread systems FME/9 Confirmed (2012)
Reconfirm
PD 6497:1982 Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982
PVE/1 Confirmed (2012)
Reconfirm
PD 6507:1982 Guidance on metric screw threads and fasteners for use by model engineers
FME/9 Confirmed (2012)
Reconfirm
PD 6508:1985 Detail drawings for the apparatus specified in BS 476:Part 11:1982
FSH/21 Confirmed (2012)
Reconfirm
PD 6516:1987 Guide to guarding fires and heating appliances CW/1 Confirmed (2012)
Reconfirm
PD 6520:1988 Guide to fire test methods for building materials and elements of construction
FSH/21 Confirmed (2012)
Reconfirm
PD 6527:1990 Methods of test for textiles (other than those methods already published as British Standards)
TCI/24 Confirmed (2012)
Reconfirm
PD 6537-1:1993
Variability of methods of test for textiles and reports of interlaboratory trials on certain methods -- Phase 1: BS 2576, BS 4303 and ISO 9290
TCI/24 Confirmed (2012)
Reconfirm
PD 6537-2:1994
Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods. -- Phase 2. BS 3320, BS 2010 and BS 1932
TCI/24 Confirmed (2012)
Reconfirm
PD 6550-1:1989
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Domed ends (heads)
PVE/1 Confirmed (2012)
Reconfirm
PD 6550-2:1989
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Openings and branch connections
PVE/1 Confirmed (2012)
Reconfirm
PD 6550-3:1989
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Vessels under external pressure
PVE/1 Confirmed (2012)
Reconfirm
PD 6550-4:1989
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design -- Heat exchanger tubesheets
PVE/1 Confirmed (2012)
Reconfirm
PD 6577:1995 The influence of environmental conditions on the testing of textile materials
TCI/24 Confirmed (2012)
Reconfirm
PD 6584:1995 Model for a supplier quality assurance assessment questionnaire
QS/1 Confirmed (2012)
PD 6609:2007 Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing
LBI/30 Confirmed (2012)
Reconfirm
PD 6614:2002 Obsolescence management. Guide to the substitution of components in electronic equipment
DS/1/2 Confirmed (2012)
Reconfirm
PD 6615:1998 Guide to setting up a parts database DS/1/2 Confirmed (2012)
Reconfirm
Email your comments to: [email protected] Your email subject line: eg: 2017 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 60 of 60 June 2016
BS identifier Title Committee Status Final Review Outcome
PD 6667:2000 Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components
DS/1/2 Confirmed (2012)
Reconfirm
PD 6677:2002 Implementation guide for NATO AQAP-160 incorporating all AQAP-160 text and relevant ISO text
IST/15 Confirmed (2012)
Withdraw
PD 6678:2005 Guide to the specification of masonry mortar B/519 Confirmed (2012)
Reconfirm
PD 6688-1-2:2007
Background paper to the UK National Annex to BS EN 1991-1-2
B/525/1 Confirmed (2012)
Reconfirm
PD 6693-1:2012
Recommendations for the design of timber structures to Eurocode 5: Design of timber structures -- General. Common rules and rules for buildings
B/525/5 Current Confirm
PD 6695-2:2008+A1:2012
Recommendations for the design of bridges to BS EN 1993
B/525/10 Current Confirm
PD 6696-2:2007+A1:2012
Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2
B/525/4 Current Reconfirm
PD 6699-1:2007
Nanotechnologies -- Good practice guide for specifying manufactured nanomaterials
NTI/1 Confirmed (2012)
Reconfirm
PD 6699-2:2007
Nanotechnologies -- Guide to safe handling and disposal of manufactured nanomaterials
NTI/1 Confirmed (2012)
Reconfirm
PD 7974-2:2002
Application of fire safety engineering principles to the design of buildings -- Spread of smoke and toxic gases within and beyond the enclosure of origin (Sub-system 2)
FSH/24 Confirmed (2012)
Reconfirm
PD 7974-8:2012
Application of fire safety engineering principles to the design of buildings -- Property protection, business and mission continuity, and resilience
FSH/24 Current Reconfirm
PD 8010-4:2012
Pipeline systems -- Steel pipelines on land and subsea pipelines. Code of practice for integrity management
PSE/17/2 Current Confirm
PD 8888:2001 Technical product documentation (TPD). An interim report
TDW/4 Confirmed (2012)
Reconfirm
PD 25888:2011
Business continuity management. Guidance on organization recovery following disruptive incidents
CAR/1 Current Confirm