About Us

Address : 105,Sita Ram Complex, Opposite Railway Under bridge, Vapi (East)

Contact – Yashodhan Vaidya – 09374662561/08866847330 . Email – metalsafety.vapi@gmail.com

Head Office : Metal Safety NDT Training Institute,301 Shanti Complex, B wing, Shanti Nagar, Near Mira Road Station, Mira Road(E)

Pioneers • Metal Safety is the 1st. Institute in Vapi to provide NDT Training &Certification.

Experience

• Metal Safety was established in 2009 by Mr.Sanjiv Shrivastav .

• Mr.Shrivastav is ASNT certified Level III expert in many NDT methods and has over 18 years of experience in the field of NDT.

Spread

• We have over Head Office in Mira Road Mumbai – with fully equipped NDT Lab.

• We have branch offices in Sanpada, Thane and Vapi.

• What is NDT?

NDT is NON-DESTRUCTIVE TESTING.

This implies that the material is to be tested for its properties or soundness without any alterations to its Present State.

In other words- The object of interest must be returned in the same condition as it was received….

Package of 4 Basic Methods

• Ultra Sound Testing - Duration 3/4 days (8 Hours per Day)

• Radiography - Duration 3/4 days (8 Hours per Day)

• Penetrant Testing -Duration 2/3 days (8 Hours per Day)

• Magnetic Particle Testing - Duration 2/3 days (8 Hours per Day)

Duration

• The total duration of the Courses consisting of 4 Basic Methods is of 80 to 100 Hours in Total or 10 to 12 Days.

• The Courses is Distributed in 2 batches :

• 1. Saturday /Sunday batch – timing 10 A.M to 5 P.M. (5 weeks)

• 2. Evening Batch – Daily 7.30 P.M. to 9 P.M.(10 hours per week = 8 weeks)

Courses Offered

Courses Offered

Certification System • WHAT IS ASNT?

ASNT stands for AMERICAN SOCIETY for NON-DESTRUCTIVE TESTING.

It is a pioneer body for certification in the field of NDT.

• WHY CERTIFICATION?

Certification is required because most of the ASME and other International codes require the person performing NDT to be certified as per Recommended Practice No. SNT-TC-1A, Personnel Qualification and Certification in Non-destructive Testing or other equivalent International standard.

Levels of QUALIFICATION as per ASNT :

• An NDT Level I individual should be qualified to properly perform specific calibrations, specific NDT and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. The NDT Level I should receive the necessary instruction and supervision from a certified NDT Level II or III individual.

• An NDT Level II individual should be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications. The NDT Level II should be thoroughly familiar with the scope and limitations of the methods for which he is qualified and should exercise assigned responsibility for on-the-job training and guidance of trainees and NDT Level I personnel. The NDT Level II should be able to organize and report the results of NDT tests.

• An NDT Level III individual should be capable of developing, qualifying and approving procedures, establishing and approving techniques, interpreting codes, standards, specifications and procedures, as well as designating the particular NDT methods, techniques and procedures to be used. The NDT Level III should be responsible for the NDT operations for which he is qualified and assigned and should be capable of interpreting and evaluating results in terms of existing codes, standards and specifications.

Certification System continued…

1. NDT is an exciting and challenging career field. 2. It is a growing career field. 3. It is a highly technology field driven by computer technology. 4. The field of NDT is filled with opportunities for career growth and advancement. 5. The demand for qualified technicians is high. 6. The pay is good. 7. Education and training is readily available. 8. There are many different types of jobs NDT Certified Inspector can do. 9. There are NDT personnel working in all parts of the country. . 10. The work can be very rewarding.

THANK YOU

Prepared by : Yashodhan Vaidya - Facilitator @ Metal Safety NDT Training Institute, Vapi.