ENCAP SYSTEMS INC.

“Encapsulating and Protecting building systems for a stronger

tomorrow”

NEW & OLD CONSTRUCTION

Test Equipment and Procedure

ASTM C1601 - 04 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces (ASTM C1601 - 04 2004) is a pressurized water test that simulates wind

driven rain. The test measures the rate of water flow out of a closed system under a given rate of

air pressure and water flow that simulates wind speed and rainfall rate respectively.

Used by the University of Central Florida to determine the reasons for water penetrations, new and old stucco construction during heaving rains and hurricanes.

Results after ASTM Test on ENCAP SEAL on the walls at the VA hospital.

.083 Gallons/ hour intrusion

(.375 Gallons/ hour intrusion considered excellent)

The Encap Group, LLC

Application of water intrusion equipment being installed to the walls of the VA hospital prior to the application of the ENCAP SEAL System.

Water curtain attached to the wall of the VA hospital prior to the application of the ENCAP SEAL water proofing system.

Note water running down the wall prior to the application of the ENCAP SEAL system.

UCF pump equipment

EXAMPLES OF PRODUCT USE

WATER PROOFING ON WALLS AND ROOFSOUC

Water Storage Tank,

Lake Highland

Orlando, FL

Encap Seal was applied as

a roof coating this water

Tank.

As a water proof

coating on concrete /

stucco walls

Allowing heavy

lift crane to

traverse

without damage to

The coating.

INSULATED WALL PANELS

ENCAP SEAL applied to walls, Orlando Florida

SYSTEM OVER T1-11 WOOD SIDING AND OLD BRICK

Columbus, Ohio

CONCRETE STRUCTURAL REPAIRS

Retaining walls repaired without the use of concrete forms.Shell Oil Company , Cleveland Ohio

DENSE GLASS

ENCAP SEAL applied to Dense Glass without using a vapor barrier.

Tavares, Florida

ENCAP SYSTEMS INC.

“Encapsulating and Protecting building systems for a stronger

tomorrow”

www.encapsystems.com