Upload
sanjay2043
View
546
Download
7
Tags:
Embed Size (px)
Citation preview
NIOSOMES: A NOVEL DRUG DELIVERY SYSTEM
Presented by:
Sanjay Kumar Yadav
Enrollment No: A10647013015
Amity Institute of Pharmacy (AIP)
Introduction Methods of Preparation Characterization of Niosomes Applications of Niosomes Toxicity of Niosomes
PRESENTATION FLOW
NOVEL DRUG DELIVERY SYSTEM (NDDS) Refers to approaches, formulations, technologies, and
systems for transporting a pharmaceutical compound in the body as needed to safely achieve its desired therapeutic effect
May involve scientific site-targeting within the body, or facilitating systemic pharmacokinetics
Technologies modify drug release profile, absorption, distribution and elimination for the benefit of Improving product efficacy and safety Patient convenience and compliance
INTRODUCTION
EXAMPLES OF NDDS • Niosomes • Liposomes• Nanoparticles • Resealed erythrocytes • Microspheres• Monoclonal antibodies • Micro emulsions• Antibody-loaded drug
delivery• Magnetic microcapsules• Implantable pumps
Figure 1: various drug delivery systems (Aitha S, 2013)
Novel drug delivery system, in which the medication is encapsulated in a vesicle which is composed of a bilayer of non-ionic surface active agents (Nasir A, 2012)
Are very small, and microscopic in size.
Although structurally similar to liposomes, they offer several advantages over them.
NIOSOMES
Figure 2: Niosomes Vesicles (Aitha S, 2013)
The vesicles forming amphiphile is a non-ionic surfactant stabilized by addition of cholesterol and small amount of anionic surfactant such as dicetyl phosphate
NIOSOMES
Figure 3: Vesicle of niosome (Aitha S, 2013)
Figure 4: Structure of Niosomes
STRUCTURE OF NIOSOMES
similar to liposomes, in that they are also made up of a bilayer.
However, the bilayer in the case of Niosomes is made up of non-ionic surface active agents rather than phospholipids.
Made of a surfactant bilayer with its hydrophilic ends exposed on the outside and inside of the vesicle, while the hydrophobic chains face each other within the bilayer.
(Patel S.M, 2012)
(Makeshwar K.B, 2013)
Entrap solutes in a manner analogous to liposomes. Osmotically active and stable. Accommodate the drug molecules with a wide range of
solubility. Exhibits flexibility in their structural characteristics
(composition, fluidity and size) Performance of the drug molecules is increased. Better availability to the particular site by protecting the
drug from biological environment. Surfactants used in preparation are biodegradable,
biocompatible and non-immunogenic
SALIENT FEATURES OF NIOSOMES(Makeshwar K.B, 2013)
Improve the therapeutic performance of the drug molecules by Delayed clearance from the circulation Protecting the drug from biological environment Restricting effects to target cells
Niosomal dispersion in an aqueous phase can be emulsified in a nonaqueous phase to Regulate the delivery rate of drug Administer normal vesicle in external non-aqueous phase.
Handling and storage of surfactants requires no special conditions. Bioavailability of poorly absorbed drugs is increased. Targeted to the site of action by oral, parenteral as well as topical
routes.
ADVANTAGES OF NIOSOMES DELIVERY SYSTEM
(Makeshwar K.B, 2013)
According to the nature of lamellarity
1. Multilamellar vesicles (MLV) 1-5 μm in size.
2. Large Unilamellar vesicles (LUV) 0.1 – 1μm in size
3. Small Unilamellar vesicles (SUV) 25 – 500 nm in size. According to the size
1. Small Niosomes (100 nm – 200 nm)
2. Large Niosomes (800 nm – 900 nm)
3. Big Niosomes (2 μm – 4 μm)
TYPES OF NIOSOMES
Film Method Ether Injection Method Sonication Reverse Phase Evaporation Heating Method Microfluidization Multiple Membrane Extrusion Method Transmembrane pH gradient (inside acidic) Drug
Uptake Process (remote Loading) The “Bubble” Method Formation of Niosomes from Proniosomes
METHODS OF PREPARATION (Madhav N.V.S, 2011)
• Mixture of Surfactant and Cholesterol Dissolved in
an organic solvent in a
round-bottomed flask. (e.g.
diethyl ether, chloroform,
etc.)
• organic solvent is removed by low pressure/vacuum at room temperature
example using a rotary evaporator.
• The resultant dry surfactant film is hydrated by agitation at 50–60°C Multilamell
ar vesicles (MLV) are formed
FILM METHOD • Also known as hand shaking
method
FILM METHOD
Figure 5: Steps of Film method (Madhav N.V.S, 2011)
A solution of the surfactant is made by dissolving it in diethyl ether.
This solution is then introduced using an injection (14 gauge needle) into warm water or aqueous media containing the drug maintained at 60°C.
Vaporization of the ether leads to the formation of single layered vesicles.
• The particle size of the Niosomes formed depend on the conditions used, and can range anywhere between 50-1000 μm. (Madhav N.V.S, 2011)
ETHER INJECTION METHOD
Figure 6: Steps of Ether injection method (Madhav N.V.S, 2011)
The mixture is probe sonicated
at 60°C for 3 minutes using a sonicator with a
titanium probe to yield Niosomes.
Added to the surfactant/ cholesterol mixture in a 10 ml glass
vial
Aliquot of drug solution in buffer
SONICATION
Figure 7: Sonication method (Madhav N.V.S, 2011)
Creation of a solution of cholesterol and surfactant (1:1 ratio) in a mixture of ether and chloroform
An aqueous phase containing the drug to be loaded is added to this
Resulting two phases are sonicated at 4-5°C
A clear gel is formed which is further sonicated after the addition of phosphate buffered saline (PBS)
Temperature is raised to 40°C and pressure is reduced to remove the organic phase
Viscous Niosome suspension is formed which can be diluted with PBS and heated on a water bath at 60°C for 10 minutes to yield Niosomes
REVERSE PHASE EVAPORATION (Madhav N.V.S, 2011)
Non-toxic, Scalable and one-step method.
HEATING METHOD
Mixtures of non-ionic surfactant, cholesterol and/or charge inducing molecules are added to an aqueous medium e.g. buffer, distilled H2O, etc• In the presence of a
Polyol such as glycerol.
The mixture is heated while stirring at low shear forces• Until vesicles are
formed
(Madhav N.V.S, 2011)
Recent technique used to prepare Unilamellar vesicles of defined size distribution.
based on submerged jet principle
MICROFLUIDIZATION
Two fluidized streams interact at ultra high velocities, in precisely defined micro channels within the interaction chamber
The impingement of thin liquid sheet along a common front is arranged such that the energy supplied to the system remains within the area of Niosomes formation
The result is a greater uniformity, smaller size and better reproducibility of Niosome are formed
(Madhav N.V.S, 2011)
MICROFLUIDIZATION
Figure 8: Steps of microfludization method (Madhav N.V.S, 2011)
Good method for controlling Niosomes size.
MULTIPLE MEMBRANE EXTRUSION METHOD
Mixture of surfactant, cholesterol and dicetyl phosphate in chloroform is made
into thin film by evaporation
The film is hydrated with aqueous drug solution
Resultant suspension is extruded through polycarbonate membranes which are placed in series for upto 8 passages
Figure 9: Multiple membrane extrusion method (Madhav N.V.S, 2011)
Solution of surfactant and cholesterol is made in chloroform
Solvent is then evaporated under reduced pressure to get a thin film on the wall of the round bottom flask, similar to the hand shaking method
This film is then hydrated using citric acid solution by vortex mixing
Resulting Multilamellar vesicles are then treated
to three freeze thaw cycles and sonicated
To the Niosomal suspension, aqueous solution containing 10mg/ml of drug is added and vortexed
pH of the sample is then raised to 7.0-7.2 using 1M disodium
phosphate
Mixture is heated at 60°C for 10 minutes to
give Niosomes
TRANSMEMBRANE pH GRADIENT DRUG UPTAKE PROCESS (Madhav N.V.S, 2011)
A recently developed technique which allows the preparation of Niosomes without the use of organic solvents.
BUBBLE METHOD
The bubbling unit consists of a round bottom flask with three necks, and this is positioned in a water bath to control the temperature.
Water-cooled reflux and thermometer is positioned in the first and second neck, while the third neck is used to supply nitrogen.
Cholesterol and surfactant are dispersed together in a buffer (pH 7.4) at 70°C.
This dispersion is mixed for a period of 15 seconds with high shear homogenizer and immediately afterwards, it is bubbled at 70°C using the nitrogen gas to yield Niosomes.
(Madhav N.V.S, 2011)
FORMATION OF NIOSOMES FROM PRONIOSOMES (Makeshwar K.B, 2013)
Water soluble carrier such as
sorbitol is coated with surfactant.
The result of the coating process is a dry formulation in which each water-soluble particle is
covered with a thin film of dry surfactant.
This preparation is termed
“Proniosomes”.
The Niosomes are recognized by the addition of aqueous phase at T > Tm and brief agitation.
T=Temperature.Tm = mean phase transition temperature
POST-PREPARATION PROCESSES (Madhav N.V.S, 2011)
1) Dialysis: The aqueous niosomal dispersion is dialyzed in a dialysis
tubing against phosphate buffer or normal saline or glucose solution.
2) Gel Filtration: The unentrapped drug is removed by gel filtration of niosomal
dispersion through a Sephadex-G -50 column and elution with phosphate buffered saline or normal saline.
3) Centrifugation: The niosomal suspension is centrifuged and the supernatant is
separated. The pellet is washed and then resuspended to obtain a niosomal suspension free from unentrapped drug.
POST-PREPARATION PROCESSES (Makeshwar K.B, 2013)
a) Size, Shape and Morphology
b) Entrapment efficiency
c) Vesicle diameter
d) In vitro release
e) Vesicle charge
f) Bilayer rigidity and Homogeneity
g) Osmotic Shrinkage
h) Physical stability of vesicles at different temperature
i) Turbidity Measurement
CHARACTERIZATION OF NIOSOMES(Singh C.H et al, 2011)
Structure of surfactant based vesicles has been visualized and established using freeze fracture microscopy
Photon correlation spectroscopy used to determine mean diameter of the vesicles.
Electron microscopy used for morphological studies of vesicles
Laser beam is generally used to determine size distribution, mean surface diameter and mass distribution of Niosomes.
SIZE, SHAPE AND MORPHOLOGY(Singh C.H et al, 2011)
After preparing Niosomal dispersion, unentrapped drug is separated by
Dialysis Centrifugation Gel filtration
Drug remained entrapped in Niosomes is determined by complete vesicle disruption using 50% n-propanol or 0.1% Triton X-100 and analysing the resultant solution by appropriate assay method for the drug. (Bragagnia M, 2012)
ENTRAPMENT EFFICIENCY
To determine drug loading and encapsulation efficiency, the niosomal aqueous suspension was ultracentrifuged, supernatant was removed and sediment was washed twice with distilled water in order to remove the adsorbed drug.
The Niosomal recovery was calculated as:
NIOSOMAL DRUG LOADING
(Makeshwar K.B, 2013)
Niosomes diameter can be determined using Light microscopy Photon correlation microscopy Freeze fracture electron microscopy. Freeze thawing
VESICLE DIAMETER (Shirsand S.B et al, 2012)
Figure 10: Microphotograph of Niosomes (Shrisand S.B et al, 2012)
At various time intervals, the buffer is analysed for the drug content by an appropriate assay method.
The bag containing the vesicles is placed in 200 ml of buffer solution in a 250 ml beaker with constant shaking at 25°C or 37°C.
The vesicle suspension is pipetted into a bag made up of the tubing and sealed.
A dialysis sac is washed and soaked in distilled water.
A method of in-vitro release rate study includes the use of dialysis tubing.
IN VITRO RELEASE (Makeshwar K.B, 2013)
The vesicle surface charge can play an important role in the behaviour of Niosomes in vitro and in vivo.
Charged Niosomes are more stable against aggregation and fusion than uncharged vesicles.
In order to obtain an estimate of the surface potential, the zeta potential of individual Niosomes can be measured by Microelectrophoresis, Fluorophores, and Dynamic light scattering.
Zeta potential is calculated by using Henry equation (Vyas S.P, 2011)
Where is Zeta potential, is electrophoretic mobility, is viscosity of the medium and is dielectric constant
VESICLE CHARGE
(Makeshwar K.B, 2013)
The biodistribution and biodegradation of Niosomes are influenced by rigidity of the bilayer.
Homogeneity can occur both within Niosomes structures themselves and between Niosomes in dispersion and could be identified via. NMR, Differential Scanning Calorimetry (DSC) and Fourier transform-infra red spectroscopy (FT-IR) techniques.
Membrane rigidity can be measured by means of mobility of fluorescence probe as a function of temperature. (Patel S.M, 2012)
BILAYER RIGIDITY AND HOMOGENEITY
Osmotic shrinkage of vesicles can be determined by monitoring reductions in vesicle diameter, initiated by addition of hypertonic salt solution to suspension of Niosomes.
Niosomes prepared from pure surfactant are osmotically more sensitive in contrast to vesicles containing cholesterol.
OSMOTIC SHRINKAGE (Singh C.H et al, 2011)
Aggregation or fusion of vesicles as a function of temperature was determined as the changes in vesicle diameter by laser light scattering method.
The vesicles were stored in glass vials at room temperature or kept in refrigerator (4oC) for 3 months.
The changes in morphology of Multilamellar vesicles (MLVs) and also the constituent separation were assessed by an optical microscope.
The retention of entrapped drug were measured 72 hours after preparation and after 1, 2 or 3 months in same formulations
PHYSICAL STABILITY OF VESICLES AT DIFFERENT TEMPERATURE
(Singh C.H et al, 2011)
Niosomes were diluted with bidistilled water to give a total lipid concentration of 0.312 mM
After rapid mixing by sonication for 5 min Turbidity was measured as the absorbance with an
ultraviolet-visible diode array spectrophotometer.
TURBIDITY MEASUREMENT (Singh C.H et al, 2011)
Niosomes as Drug Carriers Diagnostic imaging with Niosomes Drug Targeting
Delivery to the brain Anti cancer drugs Anti infectives
Targeting of bioactive agents To Reticulo-endothelial system (RES) To organs other than RES
NIOSOME DELIVERY APPLICATIONS (Malhotra M, 1994)
Ophthalmic drug delivery Delivery of peptide drugs Immunological application of Niosomes Transdermal delivery of drugs by Niosomes Delivery system for the vasoactive intestinal peptide
(VIP) Niosomes as carriers for Hemoglobin Niosomal vaccines
NIOSOME DELIVERY APPLICATIONS Nasir A. et al, (2012)
Sustained Release Localized Drug Action
OTHER APPLICATIONS Nasir A. et al, (2012)
Unfortunately, there is not enough research conducted to investigate toxicity of Niosomes.
It was determined that the ester type surfactants are less toxic than ether type surfactants.
In general, the physical form of Niosomes did not influence their toxicity as evident in a study comparing the formulations prepared in the form of liquid crystals and gels.
Nasal applications of these formulations caused toxicity in the case of liquid crystal type Niosomes.
TOXICITY OF NIOSOMES Vyas S.P, 2011
1. Aitha, S. (2013). slideshare. Retrieved 2014, from http://www.slideshare.net/swethaaitha/liposomes-and-niosomes-15259272
2. Bragagnia M, Natascia M. (2012). Development and Characterization of Niosomal Formulations of Doxorubicin Aimed at Brain Targeting. Journal of Pharmaceutical science, 184-196.
3. Madhav N.V.S, Saini A. (2011). Niosomes: A Novel Drug Delivery System. International Journal of Research in Pharmacy and Chemistry, 1(3), 498-511.
4. Makeshwar K.B, Wasankar S. (2013). Niosome: a Novel Drug Delivery System. Asian Journal of Pharmapress, 3(1), 16-20.
5. Malhotra M, Jain N. (1994). Niosomes as drug carriers (Vol. 31). Newdelhi: Indian Drugs.
6. Nasir A, Harikumar S.L, Kaur A. (2012). Niosomes: An Excellent Tool for Drug Delivery. International Journal of Research in Pharmacy and Chemistry, 2(2), 479-487.
7. Patel S.M, Rathod D.R. (2012). Niosome as an Effective Drug Delivery: A Review. International Journal for Pharmaceutical Research Scholars, 46-53.
8. Shirsand S.B, Para M.S, Kanani K.M, Keerthy D, Kumar N.D. (2012). Formulation and evaluation of Ketoconazole niosomal gel drug delivery system. Int J Pharma investig, 201-207.
9. Singh C.H, Jain C.P, Bairwa N.K. (2011). Formulation, characterization, stability and invitro evaluation of nimesulide niosomes. Pharmacophore, 2, 168-185.
10. Vyas SP, Khar. R. (2011). Targeted and Controlled Drug Delivery Novel carrier systems. New delhi: CBS Publisher and Distributors.
REFERENCE
THANK YOU