Picture Log

This is the parts of the engine after the disassembly process. Parts include crank, transmission, head, pistons, shifter cluster, bearings, ad coil.

This is the top case of the engine and the cylinders.

This is all the bolts, nuts and washers that we had to order for the reassembly of the engine.

This is where I placed the crank, crank bearings, and the transmission in the bottom end of the engine.

This is where I had to place the cylinders in the top case of the engine and install the pistons and rings.

This is after I installed the pistons and we placed the head on the cylinders.

This is where I assembled the body of the four wheeler to make sure we had not misplaced any parts before we installed the engine.

This is the engine after I had put it all back together.

This is where I had installed the engine and exhaust on the frame

This is me loosing the carbs to remove them to tune the engine.

This is me changing the jets in the carbs to get the tuning right.

This is me reinstalling the carbs after installing the smaller sized jets.