SIMPLE STEPS TO CHANGE YOUR LAWN MOWER TIRE

Lawn Tractors usually have tires without inflatable inner tubes. Replacing them is much like replacing a car tire.

These easy steps will walk you though the process of changing your lawn mower tires.

Necessary Tools

• New Tire

• Pliers

• Hammer

805-530-6596

• Screwdriver or Tire Iron

• Dish Soap

• Optional: Crowbar

Starting: Steps 1 & 2

1. Remove the Wheel from the Lawn Tractor

• Elevate wheel using jack

• Unscrew lug nuts or remove axel pin

• A crowbar can help gently pry the wheel off

805-530-6596

2. Select Replacement Tire

• Be conscious of new tire’s height

• An incorrect height may cause the lawn tractor to drag

3. Remove the Rim from the Tire

• Release air from tire to make removing rim easier

• If difficulty arises, use screwdriver or Overstock Wheel’s tire iron set to lift tire away from rim

805-530-6596

Steps 3 & 4

4. Use Dish Soap

• Use dish soap to lube tire beads (the edge of a tire that sits on the rim) before putting on new tire

Step 5

5. Apply Tire Beads*

• Work one side of tire beads over the lip of rim using our Overstock Wheel’s tire iron set

805-530-6596

*Note: If Installing an Inner Tube

• Place inner tube inside tire before applying tire beads

• Make sure the valve stem is properly placed

Steps 6 - 8

8. Put Tire back on Lawn Tractor

• Tighten the lug nuts or re-insert axel pin

• Gently lower jack

805-530-6596

7. Inflate Tire

6. Reconnect Tire with Rim

• Work the other side of tire bead using tire iron set until tire is completely on rim