Arun das latest resume

ARUNDAS.D

Mechanical Engineer

Contact Nos.: 00966549443641/ 00914792437883

E-Mail: [email protected]

Seeking assignments in MEP Project Engineering and Management with an organization of high repute

preferably in Construction (EPC) industry

PROFILE SUMMARY

A performance driven professional with 08 plus years of hand own experience in:

~ MEP Projects Engineering & Management in Hospitals, Hotels, Factories, Warehouses, High rise and

residential building construction projects.

~ Project planning through MS project and Gantt chart.

~ Installation, testing and commissioning of all MEP systems like HVAC ,Plumbing (drainage ,water supply, chiller piping

pumps & Firefighting), FM 200 ,Air Sampling system, Medical Gas ,BMS, Complete Electrical & Low Current systems.

~ Hospitals and Hotels Engineering (MEP and civil) standards.

~ HVAC standards like ASHRAE, SMACNA. Plumbing codes like NFPA, IPC & Electrical code (NEC).

~ Medical Engineering standards for various medical projects like radiology,laboratories,operation theatres,morgue etc.

~ Post & Pre Installation, Testing and commissioning of all required electrical and mechanical systems and sub-systems

for Health care equipments like MRI SCAN,CT SCAN, X-RAY and ultrasound Machineries.

~ Facility management, Operation and maintenance, Maintenance operation policies & procedures.

~ Shop drawing and As built preparation (Auto cad),its submittal and obtaining client/consultant approval.

~ Sub contractor, vendor, Contractor bills and Manpower management.

~ Raising of purchase orders, purchase requisitions.

~ Preparation of BOQ, BOM, Tendering and Cost estimation for MEP works.

~ Quantity take off for MEP works.

~ HSE Management.

~ Equipment and material selection, technical proposals, its submittal and obtaining client/consultant approval.

~ Material Procurement, Sub Contracts management and its agreement, Price negotiations.

~ Documentation (Project related ,Administration, ISO, EMS and OHSAS).

Sound exposure in Plumbing pipes selection and its sizing, Plumbing fixtures & equipment selection (pumps, valves etc.)

Sound exposure in HVAC heat load calculation, HVAC equipment selection, Duct materials selection and its sizing.

Adept in DX & chilled water units, FCU's, AHU's, Air cooled and water cooled Chillers, Exhaust Fans and its electrical

systems and requirements.

Sound exposure in Electrical power load calculation and all Electrical systems installations like installation of EMT,

RSC and pvc conduits, Bus Bar with tap offs cable trays and ladders, feeder cables, panel boards, MCC panels,

electrical MDB'S, Earthing & lightning arrestor systems, Wiring.

Sound exposure in low current systems like Matv, Cctv, BMS, Public address, Master Clock, Data and telephone

network Systems (network switches, patch panels, Fiber optic cables, MDF's, IDF's).

Deft in preparing daily work plans and ensuring that PTW and safety measures for better HSE are completed before

the start

Track record of targeting zero safety violation of team members, in terms of PPE and other works carried out at site

Adept in fasteners, fittings, piping, pumps, valves, Hydraulic and pneumatic systems

Instrumental in maintenance of the rotary and static equipments.

Sound exposure in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS)

Proficient in swiftly completing up projects with competent cross-functional skills and ensuring on time deliverables within

pre-set cost parameters

Track record of developing operations & maintenance procedures to increase the efficiency and accordingly implementing

standards and ensuring adherence to quality standards through in-process checks

An effective communicator, proactive planner & negotiator with strong analytical, problem solving, strong communication

skills and organizational abilities

CORE COMPETENCIES

Analyzing project requirements and reviewing all the project proposals wherein mapping requirements of manpower/

materials resources in which ensuring cost effective execution as per schedule.

Following correct installation practices, standards and safety Measures.

Liaising with Consultants/Clients for Materials and drawings Submissions(RFA) and approvals.

Ensuring that inspection request (RFI) are raised for the consultant and the client inspection and coordinate for inspection.

Coordinating to prevent clashes between different disciplines like electrical, mechanical and civil.

Performing Pre/ Post installation audit at site with final Drawings.

Developing project baselines while monitoring and controlling projects with respect to cost, resource deployment, time

over-runs and quality compliance to ensure its satisfactory execution

Anchoring erection & commissioning of equipments and ensured completion of project in minimum turnaround time with

effective resource utilization to maximize the output

Identifying areas of obstruction/ breakdown and taking steps to rectify the equipments through application of troubleshooting

tools

Well versed with Scheduled maintenance (TBM) and condition based maintenance (CBM) Tools and activities

WORK EXPERIENCE

Since Jun’11 Dani Ellia Building Solutions, Riyadh, Kingdom of Saudi Arabia

Projects Engineer (MEP Division)

Key Result Areas:

Planning and ensuring mechanical and electrical installation as per approved drawings and material approvals

Developing the Bill of Materials for the completion of works

Receive quotations, classify, compare and negotiate

Monitor consumption of material with respect to the ordered materials

Maintaining a system of documentation for monitoring the productivity of teams

Ensuring that inspection request (RFI) are raised for the consultant and the client inspection

Liaising with Consultants for Materials Submissions and approvals (RFA)

Ensuring that approved method statements are available explaining the method statements to the foreman and charge

hand while maintaining proper documentation for records

Discussing with clients to understand their needs and providing them MEP solutions with world class standards

(ASHRAE,SMACNA and SASO)

Ensure that all installation works in the site are in accordance with shop drawing and standards.

Testing and commissioning of all MEP systems like HVAC, Plumbing, Electrical, Low current systems.

Handling QHSE and EHS audits and documents

Efficiently worked in coordination:

o For obtaining ISO, EMS And OHSAS Certifications

o With various departments of hospitals like engineering, infection control etc.

to ensure that project is in line with hospital standards

o To prevent clashes between different disciplines like electrical,mechanical and civil.

o With vendors and sub-contractors.

o With major clients as SEIMENS HEALTH CARE LTD and GE HEALTH CARE LTD & is aware of their

systems , Standards, policies and procedures

Played a key role in:

o Performing Pre/Post installation audit at site with final Drawings.

o Preparation and submission of shop drawings, as built drawings and O&M manuals.

o Preparation of documents and coordinate for main contractor/subcontractor audits. Handling of QHSE and EHS

audits and documents.

Highlight:

Successfully received 2 Awards as Best Project Engineer for completing the radiology projects on time at King Fahad

Medical City, Prince Sultan Military Medical City and AL-Batal Design

PREVIOUS WORK EXPERIENCE

19 Sep 2010 to 30 May 2011 with SRF Limited, Chennai

Senior Executive in Mechanical Maintenance (Tyre Cord Dipping Plant) & Projects

Key Result Areas:

Carried out:

o Erection and commissioning of new machines (Engineering projects)

o Operations and maintenance of static and rotary equipments, Conveyor systems, Air compressors, Pumps, D.G

sets, Boilers, Blowers. Hydraulic and pneumatic systems, hydraulic and pneumatic DCV and cylinders, heat

exchangers, cooling towers, chillers, Fire Fighting Systems, AHU system, Electric hoists, Hydraulic lifting

equipment’s, Electric forklifts, Gearboxes, etc.

o Scheduled maintenance (TBM) and condition based maintenance (CBM) activities

o LPG handling (loading/ unloading, storage in LPG bullets)

Managed and analyzed (why why analysis) of all breakdowns and initiate corrective actions


o Arranging of spares.

o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.

o Managing, Coordination of TQM activities.

Ensured effective machine failure diagnosis and statistics with coordination of TQM activities

Gained practical experience in OHSAS, ISO&TS environment

1 Sep’08 to 17 Aug’10 with MRF Tyres Limited, Arkonam (Tamil Nadu)

Mechanical Engineer(Jr. Executive) - Engineering Department

Key Result Areas:

Handled Erection and commissioning of all machineries required for tyre manufacturing (Engineering projects), Operation

and maintenance of tyre manufacturing machineries, Conveyor systems, Pumps, Air compressors, D.G sets, Boilers,

Hydraulic and pneumatic systems, heat exchangers, cooling towers, chillers, Fire Hydrants, HVAC system, Electric hoists,

Hydraulic lifting equipments, Diesel forklifts, Gearboxes etc.

Handled shifts, Effective initialization and utilization of Manpower.




o Managing, Coordination of TPM activities.

Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).

Effective initialization and utilization of Manpower

Highlight:

Played a stellar role in implementing procedures like maintenance cost reduction, achieving zero breakdowns,

maintenance time reduction(MTTR) and reduction of time between failure (MTBF) wherein attained a reward for the same

as a part of continual improvement program

1 May’06 to 30 Aug’08 with CII Gaurdian International Ltd., Cochin (SEZ)

Mechanical Engineer (Utility &Maintenance Department)

Key Result Areas:




Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).

Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.

TRAININGS

Successfully attended various trainings on:

o TPM, Occupational Health & Safety (OHSAS )in 2008 and 2009 and TQM in the year 2011

o ISO,EMS,5S, Kaizen and Lean Manufacturing techniques in 2007

KNOWLEDGE PURVIEW

Preparation of AutoCAD Shop Drawings and as built drawings.

Well versed with Electrical, Plumbing (drainage, water supply and fire fighting), HVAC and Civil Drawings

MS project, Gantt chart.

ASHRAE, SMACNA, SASO (saudi standards), IPC, NFPA, NEC codes

HVAC Cooling Load Calculation (by manual calculation and software), Duct designing using ductilator.

Electrical Load calculation and selection of wires and cables, MCCB and Circuit breakers, Lighting and power systems

Have exposure in civil works like sub and super civil structure, dry and wet Gypsum ceilings and partitions, Flooring, False

ceiling ,Interior decorations, aluminum and structural steel fabrication.

Have knowledge in BAS and applications interior, Communication and networking system, BAS (Building automation

system).

Have knowledge in BMS (Building Management Systems).

ACADEMIC DETAILS

2006 BE in Mechanical Engineering from Mailam Engineering College, Mailam, (Anna University, Chennai) with 78%

Pursuing MBA (Part Time) in Operations and Management from ISBM,Cochin

IT SKILLS

Platforms: DOS, Windows, Linux

Tools: MS office, MS project AutoCAD, SAP, ERP, Oracle 11 I, Microsoft outlook and LAN Environment

PERSONAL DETAILS

Date of Birth: 10th March, 1985

Contact Address: C/O K.Devadasan, Arunodayam (H), Kappil Mekku, Krishnapuram P.O., Kayamkulam, Alleppey Dist.

Kerala,PIN Code - 690533

Languages Known: English, Hindi, Malayalam, Tamil and Arabic

Passport Number : F 9495223

Driving License Holding : valid Indian and Saudi Arabian

REFER TO ANNEXURE FOR PROJECTS EXECUTED

ANNEXURE

PROJECTS EXECUTED

At Dani Ellia Building Solutions, Riyadh, Kingdom of Saudi Arabia

Title: King Fahad Medical City

Role: Project Engineer

Responsibilities:

Handled all the post/pre-installation works required for the installation of GE and SEIMENS Made MRI Scan Machines

Ensure that all installations are as per hospital standards and MRI machine requirements

Liaised with client, GE, SEIMENS and consultant (RAD Planning - USA) for the work quality

Coordinate with hospital to ensure the hospital standards in various streams

Handled installation of:

o Installation, testing and commissioning of Systems like medical gas, chilled water systems with necessary piping

for MRI magnets, plumbing, AHU, pre-insulated duct system, exhaust and fresh air fans

o Fire fighting sprinkler system, FM 200 system, Air sampling system

o Necessary electrical systems like cabling, cable termination, lighting and power, earthing and lightning protection

o Low power systems like data, telephone, public address system(PAS),Master clock system, Intercom system

Handled testing and commissioning of all systems

Carried out safety assurance and audits in coordination with SEIMENS, GE and Hospital

Ensured effective preparation of:

o BOQ ,BOM bills, quotations

o supplier enquiry, Receive supplier quotations and negotiation

o RFI, RFA and Project handover reports

o Snag list and Correction

Title: Prince Sultan Military Medical City


Responsibilities:

Liaised with client, GE, and consultant (RMAE Planning ) for the work quality

Handled testing and commissioning of all systems

Carried out safety assurance and audits in coordination with GE and Hospital

Handled all the pre-installation works required for the installation of GE Made MRI Scan Machines, CT SCAN machines

and ultrasound machines to ensure that all installations are as per hospital standards and MRI machine requirements

Handled installation of:

o Installation, testing and commissioning of Systems like medical gas, chilled water systems with necessary piping

for MRI magnets, plumbing, AHU, pre-insulated duct system, exhaust and fresh air fans.

o Fire-fighting sprinkler system, fm200 system, Air sampling system.

o Necessary electrical systems like cabling, cable termination, lighting and power, earthing and lightning

protection.

o Low power systems like data,telephone,public address system(PAS),centralized clock system, intercom system

o Systems like BMS,AIR SAMPLING DETECTION SYSTEM, HONEYWELL FIRE ALARM SYSTEMS.


o BOQ, BOM, bills, quotations

o supplier enquiry, Receive supplier quotations and negotiation


Title: Marriot Courtyard Hotel - Olaya, Riyadh, Saudi Arabia


Responsibilities:

Handled installation and commissioning of all MEP systems like chilled water system, air cooled system, AHU, HVAC

ducts, fad, various types of exhaust, smoke and fresh air fans, complete fire fighting systems and plumbing including

drainage and domestic water supply systems

Handled Installation, Testing and Commissioning of complete electrical systems like Lighting Systems, Panel Boards,

Smoke Detectors, Fire Alarm System, CCTV, Pas, Intercom System and BMS System


o BOQ, bills, quotations and supplier enquiry and negotiation


Liaised with consultants and clients

Title: MSD office at Wassel Tower - Riyadh, Saudi Arabia


Responsibilities:

Handled the installation and commissioning of chilled water systemand necessary pipings, AHU, HVAC Ducts, FAD,

Exhaust Fans, fire fighting systems and other utilities

Liaised with consultants (Global Office Solutions-Riyadh)

Handled gypsum board partitioning works. Handled complete electrification works, smoke detectors, fire alarms

Carried out supplier enquiry and negotiation

Title: Saudi Aramco - Dammam, Saudi Arabia


Responsibilities:

Efficiently designed, installed and commissioned exhaust system including ducts and fans for TMEIC inverters

Ensured effective preparation of BOQ, bills, quotations

Carried out supplier enquiry and negotiation, Safety assurance and audits

Managed preparation and submission of O&M manuals

Preparation of RFI, RFA and Project handover reports

Testing and commissioning af all systems




Title: Saudi Investment Bank (SIB) Office – Riyadh, Saudi Arabia


Responsibilities:

Managed erection and commissioning of MEP works like HVAC system, firefighting system, exhaust and FAD’S and

Plumbing including Drainage and domestic water supply systems other utilities

Preparation of BOQ, bills, quotations

Supplier enquiry and negotiation. SAFETY assurance and audits

Preparation and submission of O&M manuals and preparation of RFI, RFA and Project handover reports

Testing and commissioning of all systems




Title: AL-Batal Design Factory - Furniture Factory in Riyadh:


Responsibilities:

Carried out project management of complete electrical, plumbing and HVAC works

Handled erection and commissioning of:

o Industrial coolers, chillers, chiller piping and package units with ducts, exhaust fans and cooling towers, handled

testing and balancing of all HVAC systems

o Complete fire fighting systems

o Complete drainage system and domestic water supply system

Managed complete electrification of factory including installation, testing and commissioning of lighting systems, panel

boards, busbar, data and telephone system, CCTV, public address system, fire alarms and smoke etectors, earthing and

lightning protection systems

Handled installation, testing and commissioning of compressors and diesel generator set


