Upload
arun-das
View
32
Download
1
Embed Size (px)
Citation preview
ARUNDAS.D
Mechanical Engineer
Contact Nos.: 00966549443641/ 00914792437883
E-Mail: [email protected]
Seeking assignments in MEP Project Engineering and Management with an organization of high repute
preferably in Construction (EPC) industry
PROFILE SUMMARY
A performance driven professional with 08 plus years of hand own experience in:
~ MEP Projects Engineering & Management in Hospitals, Hotels, Factories, Warehouses, High rise and
residential building construction projects.
~ Project planning through MS project and Gantt chart.
~ Installation, testing and commissioning of all MEP systems like HVAC ,Plumbing (drainage ,water supply, chiller piping
pumps & Firefighting), FM 200 ,Air Sampling system, Medical Gas ,BMS, Complete Electrical & Low Current systems.
~ Hospitals and Hotels Engineering (MEP and civil) standards.
~ HVAC standards like ASHRAE, SMACNA. Plumbing codes like NFPA, IPC & Electrical code (NEC).
~ Medical Engineering standards for various medical projects like radiology,laboratories,operation theatres,morgue etc.
~ Post & Pre Installation, Testing and commissioning of all required electrical and mechanical systems and sub-systems
for Health care equipments like MRI SCAN,CT SCAN, X-RAY and ultrasound Machineries.
~ Facility management, Operation and maintenance, Maintenance operation policies & procedures.
~ Shop drawing and As built preparation (Auto cad),its submittal and obtaining client/consultant approval.
~ Sub contractor, vendor, Contractor bills and Manpower management.
~ Raising of purchase orders, purchase requisitions.
~ Preparation of BOQ, BOM, Tendering and Cost estimation for MEP works.
~ Quantity take off for MEP works.
~ HSE Management.
~ Equipment and material selection, technical proposals, its submittal and obtaining client/consultant approval.
~ Material Procurement, Sub Contracts management and its agreement, Price negotiations.
~ Documentation (Project related ,Administration, ISO, EMS and OHSAS).
Sound exposure in Plumbing pipes selection and its sizing, Plumbing fixtures & equipment selection (pumps, valves etc.)
Sound exposure in HVAC heat load calculation, HVAC equipment selection, Duct materials selection and its sizing.
Adept in DX & chilled water units, FCU's, AHU's, Air cooled and water cooled Chillers, Exhaust Fans and its electrical
systems and requirements.
Sound exposure in Electrical power load calculation and all Electrical systems installations like installation of EMT,
RSC and pvc conduits, Bus Bar with tap offs cable trays and ladders, feeder cables, panel boards, MCC panels,
electrical MDB'S, Earthing & lightning arrestor systems, Wiring.
Sound exposure in low current systems like Matv, Cctv, BMS, Public address, Master Clock, Data and telephone
network Systems (network switches, patch panels, Fiber optic cables, MDF's, IDF's).
Deft in preparing daily work plans and ensuring that PTW and safety measures for better HSE are completed before
the start
Track record of targeting zero safety violation of team members, in terms of PPE and other works carried out at site
Adept in fasteners, fittings, piping, pumps, valves, Hydraulic and pneumatic systems
Instrumental in maintenance of the rotary and static equipments.
Sound exposure in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS)
Proficient in swiftly completing up projects with competent cross-functional skills and ensuring on time deliverables within
pre-set cost parameters
Track record of developing operations & maintenance procedures to increase the efficiency and accordingly implementing
standards and ensuring adherence to quality standards through in-process checks
An effective communicator, proactive planner & negotiator with strong analytical, problem solving, strong communication
skills and organizational abilities
CORE COMPETENCIES
Analyzing project requirements and reviewing all the project proposals wherein mapping requirements of manpower/
materials resources in which ensuring cost effective execution as per schedule.
Following correct installation practices, standards and safety Measures.
Liaising with Consultants/Clients for Materials and drawings Submissions(RFA) and approvals.
Ensuring that inspection request (RFI) are raised for the consultant and the client inspection and coordinate for inspection.
Coordinating to prevent clashes between different disciplines like electrical, mechanical and civil.
Performing Pre/ Post installation audit at site with final Drawings.
Developing project baselines while monitoring and controlling projects with respect to cost, resource deployment, time
over-runs and quality compliance to ensure its satisfactory execution
Anchoring erection & commissioning of equipments and ensured completion of project in minimum turnaround time with
effective resource utilization to maximize the output
Identifying areas of obstruction/ breakdown and taking steps to rectify the equipments through application of troubleshooting
tools
Well versed with Scheduled maintenance (TBM) and condition based maintenance (CBM) Tools and activities
WORK EXPERIENCE
Since Jun’11 Dani Ellia Building Solutions, Riyadh, Kingdom of Saudi Arabia
Projects Engineer (MEP Division)
Key Result Areas:
Planning and ensuring mechanical and electrical installation as per approved drawings and material approvals
Developing the Bill of Materials for the completion of works
Receive quotations, classify, compare and negotiate
Monitor consumption of material with respect to the ordered materials
Maintaining a system of documentation for monitoring the productivity of teams
Ensuring that inspection request (RFI) are raised for the consultant and the client inspection
Liaising with Consultants for Materials Submissions and approvals (RFA)
Ensuring that approved method statements are available explaining the method statements to the foreman and charge
hand while maintaining proper documentation for records
Discussing with clients to understand their needs and providing them MEP solutions with world class standards
(ASHRAE,SMACNA and SASO)
Ensure that all installation works in the site are in accordance with shop drawing and standards.
Testing and commissioning of all MEP systems like HVAC, Plumbing, Electrical, Low current systems.
Handling QHSE and EHS audits and documents
Efficiently worked in coordination:
o For obtaining ISO, EMS And OHSAS Certifications
o With various departments of hospitals like engineering, infection control etc.
to ensure that project is in line with hospital standards
o To prevent clashes between different disciplines like electrical,mechanical and civil.
o With vendors and sub-contractors.
o With major clients as SEIMENS HEALTH CARE LTD and GE HEALTH CARE LTD & is aware of their
systems , Standards, policies and procedures
Played a key role in:
o Performing Pre/Post installation audit at site with final Drawings.
o Preparation and submission of shop drawings, as built drawings and O&M manuals.
o Preparation of documents and coordinate for main contractor/subcontractor audits. Handling of QHSE and EHS
audits and documents.
Highlight:
Successfully received 2 Awards as Best Project Engineer for completing the radiology projects on time at King Fahad
Medical City, Prince Sultan Military Medical City and AL-Batal Design
PREVIOUS WORK EXPERIENCE
19 Sep 2010 to 30 May 2011 with SRF Limited, Chennai
Senior Executive in Mechanical Maintenance (Tyre Cord Dipping Plant) & Projects
Key Result Areas:
Carried out:
o Erection and commissioning of new machines (Engineering projects)
o Operations and maintenance of static and rotary equipments, Conveyor systems, Air compressors, Pumps, D.G
sets, Boilers, Blowers. Hydraulic and pneumatic systems, hydraulic and pneumatic DCV and cylinders, heat
exchangers, cooling towers, chillers, Fire Fighting Systems, AHU system, Electric hoists, Hydraulic lifting
equipment’s, Electric forklifts, Gearboxes, etc.
o Scheduled maintenance (TBM) and condition based maintenance (CBM) activities
o LPG handling (loading/ unloading, storage in LPG bullets)
Managed and analyzed (why why analysis) of all breakdowns and initiate corrective actions
Played a key role in:
o Arranging of spares.
o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
o Managing, Coordination of TQM activities.
Ensured effective machine failure diagnosis and statistics with coordination of TQM activities
Gained practical experience in OHSAS, ISO&TS environment
1 Sep’08 to 17 Aug’10 with MRF Tyres Limited, Arkonam (Tamil Nadu)
Mechanical Engineer(Jr. Executive) - Engineering Department
Key Result Areas:
Handled Erection and commissioning of all machineries required for tyre manufacturing (Engineering projects), Operation
and maintenance of tyre manufacturing machineries, Conveyor systems, Pumps, Air compressors, D.G sets, Boilers,
Hydraulic and pneumatic systems, heat exchangers, cooling towers, chillers, Fire Hydrants, HVAC system, Electric hoists,
Hydraulic lifting equipments, Diesel forklifts, Gearboxes etc.
Handled shifts, Effective initialization and utilization of Manpower.
Played a key role in:
o Arranging of spares.
o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
o Managing, Coordination of TPM activities.
Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).
Effective initialization and utilization of Manpower
Highlight:
Played a stellar role in implementing procedures like maintenance cost reduction, achieving zero breakdowns,
maintenance time reduction(MTTR) and reduction of time between failure (MTBF) wherein attained a reward for the same
as a part of continual improvement program
1 May’06 to 30 Aug’08 with CII Gaurdian International Ltd., Cochin (SEZ)
Mechanical Engineer (Utility &Maintenance Department)
Key Result Areas:
Played a key role in:
o Arranging of spares.
o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).
Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
TRAININGS
Successfully attended various trainings on:
o TPM, Occupational Health & Safety (OHSAS )in 2008 and 2009 and TQM in the year 2011
o ISO,EMS,5S, Kaizen and Lean Manufacturing techniques in 2007
KNOWLEDGE PURVIEW
Preparation of AutoCAD Shop Drawings and as built drawings.
Well versed with Electrical, Plumbing (drainage, water supply and fire fighting), HVAC and Civil Drawings
MS project, Gantt chart.
ASHRAE, SMACNA, SASO (saudi standards), IPC, NFPA, NEC codes
HVAC Cooling Load Calculation (by manual calculation and software), Duct designing using ductilator.
Electrical Load calculation and selection of wires and cables, MCCB and Circuit breakers, Lighting and power systems
Have exposure in civil works like sub and super civil structure, dry and wet Gypsum ceilings and partitions, Flooring, False
ceiling ,Interior decorations, aluminum and structural steel fabrication.
Have knowledge in BAS and applications interior, Communication and networking system, BAS (Building automation
system).
Have knowledge in BMS (Building Management Systems).
ACADEMIC DETAILS
2006 BE in Mechanical Engineering from Mailam Engineering College, Mailam, (Anna University, Chennai) with 78%
Pursuing MBA (Part Time) in Operations and Management from ISBM,Cochin
IT SKILLS
Platforms: DOS, Windows, Linux
Tools: MS office, MS project AutoCAD, SAP, ERP, Oracle 11 I, Microsoft outlook and LAN Environment
PERSONAL DETAILS
Date of Birth: 10th March, 1985
Contact Address: C/O K.Devadasan, Arunodayam (H), Kappil Mekku, Krishnapuram P.O., Kayamkulam, Alleppey Dist.
Kerala,PIN Code - 690533
Languages Known: English, Hindi, Malayalam, Tamil and Arabic
Passport Number : F 9495223
Driving License Holding : valid Indian and Saudi Arabian
REFER TO ANNEXURE FOR PROJECTS EXECUTED
ANNEXURE
PROJECTS EXECUTED
At Dani Ellia Building Solutions, Riyadh, Kingdom of Saudi Arabia
Title: King Fahad Medical City
Role: Project Engineer
Responsibilities:
Handled all the post/pre-installation works required for the installation of GE and SEIMENS Made MRI Scan Machines
Ensure that all installations are as per hospital standards and MRI machine requirements
Liaised with client, GE, SEIMENS and consultant (RAD Planning - USA) for the work quality
Coordinate with hospital to ensure the hospital standards in various streams
Handled installation of:
o Installation, testing and commissioning of Systems like medical gas, chilled water systems with necessary piping
for MRI magnets, plumbing, AHU, pre-insulated duct system, exhaust and fresh air fans
o Fire fighting sprinkler system, FM 200 system, Air sampling system
o Necessary electrical systems like cabling, cable termination, lighting and power, earthing and lightning protection
o Low power systems like data, telephone, public address system(PAS),Master clock system, Intercom system
Handled testing and commissioning of all systems
Carried out safety assurance and audits in coordination with SEIMENS, GE and Hospital
Ensured effective preparation of:
o BOQ ,BOM bills, quotations
o supplier enquiry, Receive supplier quotations and negotiation
o RFI, RFA and Project handover reports
o Snag list and Correction
Title: Prince Sultan Military Medical City
Role: Project Engineer
Responsibilities:
Liaised with client, GE, and consultant (RMAE Planning ) for the work quality
Handled testing and commissioning of all systems
Carried out safety assurance and audits in coordination with GE and Hospital
Handled all the pre-installation works required for the installation of GE Made MRI Scan Machines, CT SCAN machines
and ultrasound machines to ensure that all installations are as per hospital standards and MRI machine requirements
Handled installation of:
o Installation, testing and commissioning of Systems like medical gas, chilled water systems with necessary piping
for MRI magnets, plumbing, AHU, pre-insulated duct system, exhaust and fresh air fans.
o Fire-fighting sprinkler system, fm200 system, Air sampling system.
o Necessary electrical systems like cabling, cable termination, lighting and power, earthing and lightning
protection.
o Low power systems like data,telephone,public address system(PAS),centralized clock system, intercom system
o Systems like BMS,AIR SAMPLING DETECTION SYSTEM, HONEYWELL FIRE ALARM SYSTEMS.
Ensured effective preparation of:
o BOQ, BOM, bills, quotations
o supplier enquiry, Receive supplier quotations and negotiation
o RFI, RFA and Project handover reports
Title: Marriot Courtyard Hotel - Olaya, Riyadh, Saudi Arabia
Role: Project Engineer
Responsibilities:
Handled installation and commissioning of all MEP systems like chilled water system, air cooled system, AHU, HVAC
ducts, fad, various types of exhaust, smoke and fresh air fans, complete fire fighting systems and plumbing including
drainage and domestic water supply systems
Handled Installation, Testing and Commissioning of complete electrical systems like Lighting Systems, Panel Boards,
Smoke Detectors, Fire Alarm System, CCTV, Pas, Intercom System and BMS System
Ensured effective preparation of:
o BOQ, bills, quotations and supplier enquiry and negotiation
o RFI, RFA and Project handover reports
Liaised with consultants and clients
Title: MSD office at Wassel Tower - Riyadh, Saudi Arabia
Role: Project Engineer
Responsibilities:
Handled the installation and commissioning of chilled water systemand necessary pipings, AHU, HVAC Ducts, FAD,
Exhaust Fans, fire fighting systems and other utilities
Liaised with consultants (Global Office Solutions-Riyadh)
Handled gypsum board partitioning works. Handled complete electrification works, smoke detectors, fire alarms
Carried out supplier enquiry and negotiation
Title: Saudi Aramco - Dammam, Saudi Arabia
Role: Project Engineer
Responsibilities:
Efficiently designed, installed and commissioned exhaust system including ducts and fans for TMEIC inverters
Ensured effective preparation of BOQ, bills, quotations
Carried out supplier enquiry and negotiation, Safety assurance and audits
Managed preparation and submission of O&M manuals
Preparation of RFI, RFA and Project handover reports
Testing and commissioning af all systems
Ensured effective preparation of:
o BOQ, bills, quotations and supplier enquiry and negotiation
o RFI, RFA and Project handover reports
Title: Saudi Investment Bank (SIB) Office – Riyadh, Saudi Arabia
Role: Project Engineer
Responsibilities:
Managed erection and commissioning of MEP works like HVAC system, firefighting system, exhaust and FAD’S and
Plumbing including Drainage and domestic water supply systems other utilities
Preparation of BOQ, bills, quotations
Supplier enquiry and negotiation. SAFETY assurance and audits
Preparation and submission of O&M manuals and preparation of RFI, RFA and Project handover reports
Testing and commissioning of all systems
Ensured effective preparation of:
o BOQ, bills, quotations and supplier enquiry and negotiation
o RFI, RFA and Project handover reports
Title: AL-Batal Design Factory - Furniture Factory in Riyadh:
Role: Project Engineer
Responsibilities:
Carried out project management of complete electrical, plumbing and HVAC works
Handled erection and commissioning of:
o Industrial coolers, chillers, chiller piping and package units with ducts, exhaust fans and cooling towers, handled
testing and balancing of all HVAC systems
o Complete fire fighting systems
o Complete drainage system and domestic water supply system
Managed complete electrification of factory including installation, testing and commissioning of lighting systems, panel
boards, busbar, data and telephone system, CCTV, public address system, fire alarms and smoke etectors, earthing and
lightning protection systems
Handled installation, testing and commissioning of compressors and diesel generator set
Ensured effective preparation of:
o BOQ, bills, quotations and supplier enquiry and negotiation
o RFI, RFA and Project handover reports