Ceramic pulley lagging

Ceramic pulley lagging:

Kingcera ceramic lined belt pulley is adopting the new methods. We vulcanized our wear resistant ceramic into the rubber and

wrap onto the pulley. Beside, our lining which have troughs between the ceramic are good for draining the water and clay, so

that it can ensure the working when the condition is rigorous. It not only can prevent the pulley from slipping, can also

prolong the pulley's service life span.

Technical Specifications:

Item Index

Ceramic wear material ≥95%

Density 3.65g/cm3

Porosity ＜ 0.1

Compressive Strength ≥1700 Mpa

Rockwell Hardness ≥85 HRA

Vickers Hardness ≥1000 HV10

Fracture Toughness(KIC) ≥4.5 Mpa.m1/2

Bending strength ≥290Mpa

Wear volume ≤0.05 cm3

ASTM G65 Relative Factor 9-11

Thickness 8mm

Rubber Natural

Tensile Strength(TSB) ≥ 15 Mpa

Hardness 60 +/- 5 Shore A

Elongation 450%

Resilience 65%

Thickness 8MM

Manufacturing:

Clear advantages:

--- Long lifetime

--- Maintenance free operation

--- No operation interruption

--- No production losses

--- Reduced pressure losses and lower energy cost

--- Wear resistant and corrosion resistant

--- Deviation resistant

Customer visiting:

Certification:

EXPLORE PROJECT BY COMPANY

Add: No. 8 Lixing West Road, Changsha, Hunan Province, China

Sale manager: Roy Luo Tel: +86-731-84019856 Fax: +86-731-84069186 Moblie: +86-18570396817 E-mail: roy@kingcera.com/roy@jcnmc.com

Web: www.kingcera.com