Edality's corporate presentation 2015

Edality © 2015. Confidential

CORPORATE PROFILE 2015

KEY FACTS

2007

The company was founded on April 5, 2007 in Minsk, Republic of Belarus. We

design electronics starting from the very first days.

> 40The number of successfully completed projects for the

customers all over the world allows us to proudly

proclaim that we possess huge experience

accumulated within last 8 years.

> 300 000

Summarized amount of time our team has spent on executing commercial

projects exceeds 300 000 hours.

KEY PARTNERS


TURNKEY ELECTRONICS DEVELOPMENT

OFFSHORE DEVELOPMENT CENTER

Deep technical knowledge and significant experience on eachstage of product development and testing.

Building flexible engineering teams (offshore development centers) withtransparent management.

Consulting on stage of consideration of business idea, estimating development andproduction expenses, preparing for fabrication.CONSULTING


SERVICES

SEPARATE DEVELOPMENT SERVICESProviding stand-alone services in order to maintain an ongoing projectand shorten terms of product launch: PCB design, SW development,testing, etc.

Schematics design PCB layout designSI, PI, thermal analysis

Embedded software development, FPGA programming

Virtual prototyping – creating 3D-models of a PCB or complete assembly

Library creation and maintenance

Testing and verification

CUSTOM ELECTRONICS DESIGN


High-speed digital, analog, mixed digital/analog PCB designs;

Using Routing approach based on signals’ cross-coupling;

EMC and Thermal verification;

Pre- and Post-layout SI (Signal Integrity) and PI (Power integrity) verification;

Calculating parameters of PCB (Stack-up) with controlled impedances;

Preproduction inspection and optimization (DFM/DFA).

Company’s experience involves hundreds of solutions, including development of high-speed devices (up to 10 Gbps), FPGA, digital, analog and mixed-signal designs.We take advantage of using time-proven approaches to routing and verification, with help of up-to-date CAD systems.

PCB LAYOUT DESIGN


We made over 3000 components with varying complexity, up to 1500 pins for a single item. During the library creation we use different CAD’s in order to satisfy Customer’s specific requirements. Each component goes through three-step verification procedure to meet high standards of expertise.

LIBRARY CREATION & MAINTENANCE

SCHEMATIC SYMBOL CREATION PCB FOOTPRINT CREATION

Saving time on entering entire scheme

Minimizing risks of mistakes Compliance with requirements

of IEC 60617, etc.

Saving time on PCB layout design

Proven quality of footprints Compliance with

requirements of IPC standard



Automotive

Telecommunications

Security systems

Embedded solutions

Medical equipment

Multimedia

AREAS OF EXPERTISE

Mentor Graphics Expedition Enterprise Mentor Graphics PADS Mentor Graphics HyperLynx Cadence Allegro Cadence Orcad Zuken Cadstar Zuken CR5000 Altium Designer

CADs IN USE


SRAM LPDDR LPDDR2-1066 DDR DDR2-1033 DDR-2066 DDR4 QDRI

QDRII RLDRAM RLDRAMIIetc.

INTERFACES

HDMI USB 1.x/2.0/3.0 Gigabit Ethernet PCI-e (Gen 1/2/3) PCI-x SATA LVDS SerDesetc.

MEMORY

TECHNOLOGY EXPERIENCE


Development of SoM based on Freescale i.MX6 CPU fromscratch, compliant with SMARC standard. We made full cycle ofhardware development, including making schematics design,PCB layout design, testing and verification.We also developed Board Support Package based on the latestversion of Linux, and drivers to support a list of peripheraldevices.

4 1800 hrs

12-layer PCB with blind and buried vias, 85x50 mm

3x PCIe Gen.2 2x SDIO 8x DDR3 3x USB

3x I2S 5x I2C 10/100/1000 Mbps Ethernet SATA -40°C - +85°C RoHS, CE, EMC, ISO, etc.

SMARC SOM BASED ON FREESCALE i.MX6


The client required new control unit for meat refrigerationsystem with remote status control and management viaWi-Fi and Ethernet.

The fridge is based on SoM with AM335x CPU on board,which collects and processes data from temperature,humidity and door position sensors.

FRIDGE WITH REMOTE CONTROL

4 2500 hrsEdality © 2015. Confidential

Within this project our engineers developed both hardware andsoftware for power control unit and general control system of thescalable supercomputer.

Developed solution provides remote control over power system of thecomputer, asset condition monitoring and general control over up to 9compute blades, 18 hard drives, 2 high-speed commutation switches,up to 4 programmable primary power sources. New power supplysystem is compliant with ATX standard. Intellectual air cooling systemcollects and analyses metering values from a number of temperaturesensors.

Set of high-current PCBs designed by our engineers is capable toprovide up to 450 W output power and passage of current up to 90 A.

CONTROL SYSTEM OF A SUPERCOMPUTER

5 чел 2600 hrsEdality © 2015. Confidential

Designed module is a 10-layer board based on Spartan®-6FPGA with custom form-factor. It serves for automotivepurposes and contains ARM® Cortex®-R4F 32-Bit RISCCPU from TI, SDRAM memory, Ethernet, USB, SD memorycard interface, CAN bus, SPI bus.Design of the module was created in tight collaboration withthe customer, the whole project took about 6 weeks. UsedCAD version: Altium Designer.

под ключ

10-layer PCB FPGA Xilinx Spartan-6 ARM Cortex-R4F 32-bit SDRAM SPI

Ethernet USB SD CAN

PCB FOR VEHICLE’S ONBOARD COMPUTER


The client needed to develop a new control unit for thenext generation of parking system with embedded cash-register machine, TFT-panel, and communication systembetween driver and operator.

Our engineers had defined full range of technicalrequirements, designed schematics and PCB layout, andprovided finished solution based on SoM with AM335xCPU.

Prototype of the board was tested and successfullyrepresented to the client.

CONTROL UNIT FOR PARKOMAT

под ключ3 1700 hrs


Main purpose of the boards was testing samples ofexperimental microprocessors, developed by thecustomer.

We had to prepare layout of four different PCBs formounting either processor in QFN88 package orspecialized adapter for the same type of integratedcircuit.

Within this project we provided the possibility of usingpredefined climatic chamber aimed to control keyoperating conditions during the tests.

под ключ

PCBs FOR TESTING MICROPROCESSORS


Edality

Surganova st. 43, office 602Minsk, 220013, Belarus

+375 17 2966580

[email protected]

THANK YOU

Engineering

Edality's corporate presentation 2015