Upload
jose-miguel-barrionuevo
View
60
Download
3
Embed Size (px)
Citation preview
EQH-3.0
Induction Heater
EQH-3.0 Induction Heater
The preparation of metallic samples is madenowadays using varied and different ways –according to the hardness of the metal -. Manytimes, the preheating of the sample isnecessary in order to soften the metal andthus facilitate its subsequent processing,whether by crushing or punching. The EQH-3.0 Induction Heater has been speciallydeveloped for heating up lollipops and barsfor their fast softening.
The EQH-3.0 Induction Heater has got 5 predefinedprograms to cater for the requests of the routines inthe preparation of samples in steel factories andfoundries. These programs can be modifiedaccording to the type of sample and the needs ofeach client.
The EQH-3.0 simply requires an space of 50 x 50cm. and a power source of 200 V, and it has got thecapacity to heat up a piece of metal to hightemperatures in barely 30 seconds – as per thechosen program -.
The operation of the unit is very simple. Once thedesired program is selected, you must put the sampleto be heated inside the coil and push the «START»button. The heater will switch on – the lamp insideunit 2 will indicate that the coil is heating -. When theestablished time is reached, the unit shall warn with ahigh pitch sound that the power in the coil willdecrease to a stop in order to allow for the sample tobe taken out. At that moment, the sample will beperfectly ready for processing – as a safetymeasure, the lamp will continue on for 30 seconds ormore -.
Applications:
steel and ferroalloys
• Heat up quickly your metallicsamples
• Very simple to operate
• 5 adjustable working programs
• Convenient digital display withinstructions in Spanish and English
• Compact design
• The best quality/price ratio in the market
• Very fast• Simple• Safe• 5 working programs
Technical specifications:
Method: induction heating_________________________________________________________________________________________________________________________
Applications: Acerías, Fundiciones_______________________________________________________________________________________________________________________________________________
Programs: five programs_______________________________________________________________________________________________________________________________________________
Time: adjustable / 30 seconds_______________________________________________________________________________________________________________________________________________
Maximum power: 3KVA_______________________________________________________________________________________________________________________________________________
Power source: 220V 50/60 Hz_______________________________________________________________________________________________________________________________________________
Induction frequency: 120 kHz ... 150 kHz_______________________________________________________________________________________________________________________________________________
Protection: IP 40_______________________________________________________________________________________________________________________________________________
Dimensions: 40 (height) x 51 (width) x 42cm (depth)Approximate weight: 12Kg_______________________________________________________________________________________________________________________________________________
* Depending on the sample material and the heating program
Equilab, S.A.Avda. Camino de lo Cortao, 21 - Nave 628703 - San Sebastián de los Reyes - MadridTel.: 91 661 00 22 / Fax: 91 661 81 46www.equilab.esAtención al cliente: [email protected]
EQUILAB
© 2014 Equilab, S.A. All Rights Reserved
EQUILAB is a registered trademark of Equilab, S.A.