Upload
theodoros-yfantidis
View
631
Download
10
Tags:
Embed Size (px)
DESCRIPTION
This is the new ISOMAT product list in English.
Citation preview
PRODUCT LISTFlip through the complete range of our products
Repa
iring
Mat
eria
lsW
ater
proo
fing
Mat
eria
lsTi
le A
dhes
ives
& Gr
outs
Pain
ts &
Pla
ster
sFl
oorin
gsCo
ncre
te &
Mor
tar
Addi
tives
Tools & AccessoriesProduct Index
Appendix
6. Floorings6.1 Cement-based Floorings6.2 Impregnations & Varnishes for Cement-based Floorings6.3 Epoxy-Cement based Floorings6.4 Epoxy & Polyurethane Floorings
8890
80828383
5. Paints & Plasters
C O N T E N T S Page
1. Waterproofing Materials
2.2 Mortar Additives2.1 Concrete Additives
2.3 Auxiliary Concreting Agents
2. Concrete & Mortar Additives
46
1.1 Waterproofing of Basements & Tanks1.2 Waterproofing of Terraces1.3 Waterproofing of Walls
1.5 Waterproofing Materials for Joints1.6 Roofing Membranes
1.4 Complementary Waterproofing Products - Reinforcements
4.1 Strengthening & Repairing of Concrete4.1.1 Cement-based Materials4.1.2 Epoxy-based Materials4.1.3 Fiber Reinforced Polymers (F.R.P.)
4. Repairing Materials
4.3 Putties4.2 Construction & Repairing of Masonry Wall
3.1 Tile Adhesives3.2 Tile Grouts
3. Tile Adhesives & Grouts
3.3 Adhesives for Special Applications3.4 Complementary Products
4.4 Protective Materials & Varnishes
202324
10
1417
13
44
4744
49
5150
54
7072
69
73
6668
64
73
28323741
77785.10 MaterialsPlastering Reinforcement
5.5 Acrylic Plasters
5.9 Plaster Primers
5.6 Silicone Plasters5. 7 Silicate Plasters5.8 Cement-based Plasters
5.1 Interior Paints & Primers5.2 Exterior Paints & Primers5.3 Enamel Paints & Primers5. 4 Epoxy Paints & Primers
4.5 Cleaning Agents4.6 Elastic Joint Sealants4.7 Bituminous Repairing Materials
5856
61
WATERPROOFINGMATERIALS• Waterproofing of Basements & Tanks
• Waterproofing of Terraces
• Waterproofing of Walls
• Complementary Waterproofing Products - Reinforcements
• Waterproofing Materials for Joints
• Roofing Membranes
1
eu
4
1. Waterproofing Materials
1.1 Waterproofing of Basements & TanksPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
AQUAMAT0317/1
4
4
25 kg5 kg
5 kg25 kg
25 kg
Grey
White
Light Blue
Cement-based brushable sealing slurry
AQUAMAT-FLEX0314/1
Two-component, flexible,brushable sealing slurry
(A+B) (A+B)18 kg 18
33 kg(A+B)
54(A)54(B)
0317/1
54160
16054
54
5418 kg
Cement-based, brushable sealing slurry. It offers total waterproofing against hydrostatic pressure up to 7 atm according to DIN 1048. Ideal for waterproofing basements and reservoir tanks. Suitable for potable water tanks according to W-347. Ideal for the internal (negative side) waterproofing of underground areas, since it can withstand negative water pressure. It is classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Grey, white, light blue.
2Consumption: 2,0-4,0 kg/m .
Two-component, flexible, brushable sealing slurry. Suitable forwaterproofing substrates that show or are expected to showhair cracks due to contraction-expansion or vibration.Ideal for surfaces that will be covered with tiles, inverted roofs,underground water tanks etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Grey. Packages: 33 kg (25 kg A+8 kg B), 18 kg (13,6 kg A+4,4 kg B).
2Consumption: 2,0-4,0 kg/m .
AQUAMAT-ELASTIC0338/1
Two-component, elastic,brushable sealing slurry
(A+B)
(A+B)
(A+B)
(A+B)
(A+B)
35 kg
35 kg
7 kg
18 kg
Grey
White54(A)(B)
54(A)
48
1854(B)
Two-component, elastic, brushable sealing slurry. Suitable for waterproofing substrates that show or are expected to show hair cracks due to contraction-expansion or vibration. Idealfor roofs, swimming pools, above ground water tanks etc. Also used for waterproofing under tiles combined with the elastic tile adhesive ISOMAT AK-ELASTIC. It is classified as a coating for surface protection of concrete, according to EN 1504-2. Color: Grey, white. Packages: 35 kg (25 kg A+10 kg B),18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B).
2Consumption: 2,0-4,0 kg/m .
54
0317/1
18 kg
One-component, flexible, fiber-reinforced,brushable sealing slurry
One-component, flexible, fiber-reinforced, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces made of concrete, plaster, bricks, cement-blocks, mosaic etc. Ideal in cases where flexibility of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, underground tanks etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Grey.
2Consumption: 1,5-3,0 kg/m .
One-component, elastic, fiber-reinforced,brushable sealing slurry
AQUAMATMONOELASTIC
AQUAMAT-MONOFLEX
One-component, elastic, fiber-reinforced, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces made of concrete, plaster, gypsum boards, wood, metal etc. Suitable for waterproofing substrates that suffer from contraction-expansion or vibration and show or are expected to show hair cracks, such as roofs, balconies, swimming pools, inverted roofs etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2. Color: Grey.
2Consumption: 1,25-2,50 kg/m .
Waterproofing of Basements & Tanks
5
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Wat
erpr
oofin
g M
ater
ials
0317/1
Brushable sealing slurryresistant to sulfates
Cement-based, brushable sealing slurry for waterproofing surfaces that come into contact with sewage and groundwater containing sulfates. Suitable for waterproofing walls and floors in sewage tanks, wastewater canals, dams etc.Color: Grey.
Consumption: 22,0-4,0 kg/m .
AQUAMAT-SR
AQUAFIX0315/1
Rapid-setting cement for instant plugging and sealing of water leaks.Color: Grey.
Consumption:Approx. 1,6 kg/lit.
Rapid-setting cement for instant sealing of water leaks
15
NEW
FIX-RAPID0315/1
4
Fast-setting cement for anchoring
Fast-setting cement. It is used for quick repairs, fixing, anchoring, patching of cavities or holes etc. and generally wherever the surface needs to be durable and promptly used. Color: Grey.
Consumption: Approx. 1,6 kg FIX RAPID for the preparation of 1 lit hardened mixture.
DUROPRIMER-SG0402/2
10 kg(A+B)
Two-component, solvent-free epoxy primer. It is used as a waterproofing layer on floors that are subject to rising damp and will be covered with epoxy flooring systems or cement screeds. Moreover, it can be used as a primer under the DUROFLOOR epoxy system on substrates that are still damp or oil-contaminated (first, the substrate should be cleaned from oils). It is classified as SR-B2,0, according to EN 13813.Color: Light beige.
2Consumption: 600-1000 g/m .
Two-component epoxy primer for concrete floors
0344/1
(A+B)
54
3275
240
160
42
54
25 kg
15 kg5 kg1 kg
4 kg
20 kg
Crystalline waterproofing slurry
Cement-based, brushable sealing slurry. It penetrates the mass of the concrete and waterproofs it. It remains permanently active, and therefore, continuously protects construction from any water presence. It is capable of sealing hair cracks, even if they appear after construction. It is resistant to both positive and negative hydrostatic pressure. Suitable for waterproofing basements, foundations, manholes and tanks. It is classified as a coating for surface protection of concrete, according to EN 1504-2. Color: Grey.
2Consumption: Approx. 1,5 kg/m .
AQUAMAT-PENETRATE
PLASTIPROOF0120/1
Plasticizing/waterreducing admixturefor concrete
4
*1000 kg240 kg20 kg5 kg
23972
6
Waterproofing Materials
1.2 Waterproofing of Terraces
ISOFLEX0201/1
Brushable, elastomeric waterproofing membrane
ISOFLEX-T25 0225/1
25 kg15 kg5 kg1 kg
25 kg15 kg5 kg1 kg
Brushable, elastomeric waterproofing membrane
Brushable, elastomeric liquid membrane possessing high elasticity and durability even in extreme temperature conditions
0 0(from -25 C to +120 C). Used for jointless and seamless waterproofing of terraces, forming a uniform, elastic vapor-permeable sealing layer.It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2. Color: White, redbrown (Redbrown is available in 1 kg, 5 kg and 15 kg packages.)
2Consumption: 1,0-1,5 kg/m .
Brushable, elastomeric liquid membrane possessing high elasticity and durability. Used for jointless and seamless waterproofing of terraces.It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.Color: White, redbrown.
Consumption:21,0-1,5 kg/m .
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
12
12
Waterproofing of Basements & TanksPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
AQUAMAT-ADMIX0317/1
Crystallinewaterproofingadmixture
Concrete waterproofing admixture in powder form that is added during concrete preparation forming insoluble crystalline compounds. It improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives positive and negative hydrostatic pressure equally well. Suitable for waterproofing foundations, basements, tanks etc. It is classified with the CE marking as a water resisting concrete admixture, according to EN 934-2:T9. Color: Grey. Consumption: 0,8-1,0 kg per 100 kg of cement.
2444
110336
2444
110336
5420 kg
* Packages marked with an asterisk are available by order.
Plasticizing-waterproofing admixture (ASTM C-494, type A, ELOT EN 934-2:T2 & T9). Used for formulating concrete with low water permeability and improved physical properties.Color: Dark brown.
Consumption:0,2-0,5 kg per 100 kg of cement.
7
Waterproofing of TerracesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Wat
erpr
oofin
g M
ater
ials
ISOFLEX-PU 5000226/1
Brushable polyurethanewaterproofing membrane
One-component, brushable, polyurethane, liquid membrane.Used for jointless and seamless waterproofing of terraces, forming a uniform, elastic, vapor-permeable sealing layer. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.Color: White, grey, redbrown.
Consumption:Approx. 1,5 kg/ .2m
NEW
NEW
PRIMER-PU 1000227/1
Primer of ISOFLEX-PU 500
One-component, polyurethane primer with solvents. It ensures the proper adhesion of the brushable, polyurethane liquid membrane ISOFLEX-PU 500 to porous substrates, such as concrete, cement-mortars, wood etc.Color: Transparent.
Consumption: 20,2-0,3 kg/m .
Two-component, brushable, polyurethane, liquid membrane, without solvents. Suitable for waterproofing terraces and balconies, either as an exposed layer, or under tiles, thermal insulation plates etc. Ideal for internal use, as it is almost odorless.Color: Grey.
Consumption:2Approx. 1,5 kg/m .
ISOFLEX-PU 5500227/1
Two-component,brushable, polyurethane,waterproofing membrane
ISOFLEX-PU 6000227/1
Aliphatic polyurethane, brushable waterproofing membrane
ISO-PRIMER0206/1
Primer of ISOFLEX and ISOFLEX-T25.Color: White.
Consumption:20,2-0,3 kg/m .
Primer of ISOFLEX and ISOFLEX-T25
One-component, brushable, aliphatic, polyurethane, liquid membrane. It forms a seamless and jointless waterproofing layer of high elasticity and excellent resistance to UV radiation.Color: White, grey.
Consumption: Approx. 1,5 kg/ 2m .
12036
320
33120360
36
3972
324
120360
416
412
412
416
25 kg6 kg1 kg
17 kg5 kg1 kg
12,5 kg
25 kg
20 kg5 kg1 kg
5 kg1 kg
39(A+B)
8
Waterproofing Materials
Waterproofing of TerracesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0317/1
AQUAMATMONOELASTIC
AQUAMAT-FLEX0314/1
Two-component, flexible,brushable sealing slurry
(A+B) (A+B)18 kg 18
33 kg(A+B)
54(A)54(B)
SM-161407/1
Special solvent for polyurethane coatings
Solvent used to dilute polyurethane coatings. Especially suitable for diluting the brushable polyurethane waterproofing membranes ISOFLEX-PU 500, when applied by spraying. It can also clean tools used for the application of ISOFLEX-PU 500 and also tools from residues of epoxy coatings. Additionally, it can be used as a thinner for epoxy coatings. For polyurethane coatings SM-16 may be added up to 10% by weight.
0317/1
One-component, flexible, fiber-reinforcedbrushable sealing slurry
AQUAMAT-MONOFLEX
NEW
TOPCOAT-PU 720 0229/1
18 kg
18 kg
5 kg1 kg
20 kg4
16
54
54
120320
33
Aliphatic, elasticpolyurethane top coat
One-component, aliphatic, polyurethane top coat. It is used for the protection of ISOFLEX-PU 500 against solar radiation (UV), especially if a dark final color is desired. Also suitable in cases where the polyurethane waterproofing coatings are subject to pedestrian traffic and light vehicle traffic (e.g. parking lots).Color: White, grey. Other colors by order (minimum quantity 500 kg).
Consumption: 0,12-0,25 kg/ , depending on the substrate.2m
45 lit 72121 lit 324
One-component, flexible, fiber-reinforced, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces made of concrete, plaster, bricks, cement-blocks, mosaic etc. Ideal in cases where flexibility of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, underground tanks etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Grey.
2Consumption: 1,5-3,0 kg/m .
Two-component, flexible, brushable sealing slurry. Suitable forwaterproofing substrates that show or are expected to showhair cracks due to contraction-expansion or vibration.Ideal for surfaces that will be covered with tiles, inverted roofs,underground water tanks etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Grey. Packages: 33 kg (25 kg A+8 kg B), 18 kg (13,6 kg A+4,4 kg B).
2Consumption: 2,0-4,0 kg/m .
One-component, elastic, fiber-reinforced,brushable sealing slurry
One-component, elastic, fiber-reinforced, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces made of concrete, plaster, gypsum boards, wood, metal etc. Suitable for waterproofing substrates subject to contraction-expansion or vibration and show or are expected to show hair cracks, such as roofs, balconies, swimming pools, inverted roofs etc. It is classified as a coating for surface protection of concrete, according to EN 1504-2. Color: Grey.
2Consumption: 1,25-2,50 kg/m .
9
Waterproofing of TerracesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Wat
erpr
oofin
g M
ater
ials
ISOPAST1014/6
3619 kg
Bituminous emulsion
5 kg 120
ISODIEN 4 PF ALU0811/4
251m x 10m
2(10m )
Elastomeric bituminous membrane reinforced with polyester 2cloth (150 g/m ) and covered with aluminium sheet. Fixed by
torch welding without using bituminous glue.
2Weight: 4,0 kg/m .
Elastomeric bituminous membrane covered with aluminium sheet
ISOGUM 3V0810/4
301m x 10m
2(10m )
Plastomeric bituminous membrane reinforced with fiberglass 2tissue (50 g/m ). Fixed by torch welding without using
bituminous glue.
2Weight: 3,0 kg/m .
Plastomeric bituminous membrane reinforced with
2fiberglass tissue (50 g/m )
ISOGUM P0801/4
25
2323
1m x 10m 2(10 m )
Roll
Roll
Roll
25
Plastomeric bituminous membrane (APP) reinforced with 2polyester cloth (180 g/m ) with or without mineral chipping.
Fixed by torch welding without using bituminous glue.
Plastomeric bituminous membrane (APP) reinforced with polyester
2cloth of 180 g/m2ISOGUM 4,5 P MIN WHITE (4,5 kg/m ).
PLAIN MEMBRANES 2ISOGUM 4 P (4,0 kg/m ).
MEMBRANES WITH MINERAL CHIPPING2ISOGUM 4 P MIN (4,0 kg/m ).
2ISOGUM 4,5 P MIN (4,5 kg/m ).
AQUAMAT-ELASTIC0338/1
(A+B)
(A+B)
(A+B)
(A+B)
(A+B)
35 kg
35 kg
7 kg
18 kg
Grey
White54(A)(B)
54(A)
48
1854(B)
Bituminous emulsion with excellent adhesion and resistance to acid and alkaline solutions. Used for waterproofing foundations, retaining walls, floors, inclined (pitched) roofs etc. Also used as a primer for fixing bituminous membranes.Color: Brown-black.
Consumption:20,2-1,0 kg/m /layer.
Two-component, elastic,brushable sealing slurry
Two-component, elastic, brushable sealing slurry. Suitable for waterproofing substrates that show or are expected to show hair cracks due to contraction-expansion or vibration. Idealfor roofs, swimming pools, above ground water tanks etc. Also used for waterproofing under tiles combined with the elastic tile adhesive ISOMAT AK-ELASTIC. It is classified as a coating for surface protection of concrete, according to EN 1504-2. Color: Grey, white. Packages: 35 kg (25 kg A+10 kg B),18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B).
2Consumption: 2,0-4,0 kg/m .
Waterproofing Materials
10
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
1.3 Waterproofing of Walls
FLEXCOAT0202/6
High-quality, elastic,waterproofing paint
Elastic, waterproofing paint. It offers total water impermeability protecting walls from rain. It has high elasticity and crack bridging ability on surfaces that show hair cracks. Suitable for painting and waterproofing walls, protecting bituminous layers etc. For exterior and interior use. Color: White. 266 selected colors* (minimum order quantity 10 lit).
2Coverage: 8-12 m per liter.* 305 NCS pallet.
White
Colors
4
444
110
44110
10 lit3 lit
10 lit3 lit
ISOPAST-RUBBER1014/6
Elastomeric bituminousemulsion
ISOMAC1018/6
Bituminous mastic
Bituminous mastic with excellent adhesion and elasticity. It can be cold-applied with a smooth trowel. Suitable for sealing joints on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points while fixing bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing waterproofing layers formed by bituminous membranes.Color: Black.
Consumption: 1,2-1,3 kg/lit.
Elastomeric bituminous emulsion consisting of high-quality asphalt, resins and special additives. It has high durability in moisture and excellent elasticity. It provides excellent adhesion to various substrates like concrete, metal, wood etc. It is used for waterproofing foundations, retaining walls, terraces, roofs, etc.Color: Brown-black.
Consumption:20,35-0,50 kg/m /layer.
Waterproofing of TerracesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOLAC-BT1015/6
36
36120
12036
19 kg
20 kg5 kg
5 kg17 kg
Bituminous varnish
Bituminous waterproofing varnish with solvents. It provides excellent adhesion to all kinds of substrates and water impermeability. Used as a primer for fixing bituminous membranes, as a vapor-barrier in insulations, and for protecting concrete or metal surfaces from moisture (protection against oxidation). It is applied in 1-3 layers by roller or brush.Color: Black.
2Consumption: On metal surfaces: 100-150 g/m /layer. 2 On concrete surfaces: 250-300 g/m /layer.
(former ISOLAC)
Waterproofing of WallsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
11
Wat
erpr
oofin
g M
ater
ials
0228/1
NANOPRO-C Water-based emulsion with high penetrating ability, based on nano-molecular structure. It protects porous surfaces from moisture and salt stains. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2.Color: White (transparent after drying).
2Consumption: 100-200 ml/m , depending on the absorptivity of the substrate.
Nano-impregnationfor protectingporous surfaces
0228/1
NAN0-SEAL
Surface waterproofer/stabilizer
Highly-penetrative, polymer emulsion. When applied on porous substrates, it stabilizes and protects them from the humidity and the creation of salt stains. NANO-SEAL prevents the growth of mould and fungi on the surface of the substrate. It can be over-coated with paint.Color: Light blue (transparent after drying).
Consumption: 2100-200 g/m , depending on the absorptivity of the substrate.
0207/1
PS-21
Siloxane-based solution without solvents for waterproofing
0207/1
PS-20
Siloxane-based solution for waterproofing
Ready-to-use, siloxane-based, transparent solution with solvents for waterproofing. It ensures extremely high water-repellence and long-term protection. It can be applied on various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection from rain. Also suitable for waterproofing tile joints. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: Transparent.
2Consumption: 0,2-0,4 lit/m .
Ready-to-use, siloxane-based solution without solvents for waterproofing. It ensures extremely high water-repellence and long-term protection. It is suitable for waterproofing tile joints and the protection from rain of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly damp substrates. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: White (transparent after drying).
2Consumption: 0,2-0,4 lit/m .
FLEX-PRIMER0224/6
High-quality, acrylic,water-based primer
Highly-penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for waterproofing walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL. Color: White.
2Coverage: 5-10 m /kg. The 10 kg package is available in round, plastic containers, useful for preparing colored primers. A colored primer is necessary when the substrate will be covered with acrylic plasters of base D & TR.
412
412
418
412
412
3972
324
2
3972
324
22120288
72324
39
4472
39
324
20 lit5 lit1 lit
220 kg
5 kg1 kg
20 kg
20 lit5 lit1 lit
20 lit3 lit1 lit
20 kg10 kg5 kg1 kg
Waterproofing Materials
12
Waterproofing of WallsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0228/1
NANOPRO-L Water-based emulsion with high penetrating ability, based on nano-molecular structure. It protects porous and slightly porous surfaces (marbles, granites etc) from oil stains, moisture and salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: White (transparent after drying).
2Consumption: 50-100 ml/m , depending on the absorptivity of the substrate.
Nano-impregnation for protecting surfaces from oils
AQUAMAT-F0215/1
Aqueous silicate solution used against rising damp on walls made of concrete or masonry. It can be applied either by impregnation or by a borehole procedure.Color: Transparent.
Consumption:2By boreholes: Approx. 18 kg/m of wall cross-section. 2By impregnation: 200-300 g/m of wall surface.
Damp proof course
ISOMAT SL 170523/3
Solvent-free elastomeric liquid membrane possessing high elasticity and durability. Used under tiles for jointless andseamless waterproofing of sanitary areas like bathrooms, showers etc. It can be applied by roller or spatula on concrete, plaster, gypsum-board, chipboard etc.Color: Grey.
Consumption:21,0-1,5 kg/m , depending on the nature of the substrate. Elastomeric liquid
membrane for waterproofing under tiles
0228/1
NANOPRO-M
412
4
412
324
110
7239
7226
44
3972
324
20 lit5 lit1 lit
6 kg25 kg
15 kg5 kg
20 lit5 lit1 lit
Water-based emulsion with high penetrating ability based on nano-molecular structure. It protects unporous surfaces from moisture and salt stains. Suitable for polished marbles, granites, tiles, porcelain etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2.Color: White (transparent after drying).
Consumption: 250-70 ml/m , depending on the absorptivity of the substrate.
Nano-impregnation for protecting marbles
1.4 Complementary Waterproofing Products - ReinforcementsPS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
13
Wat
erpr
oofin
g M
ater
ials
1203/1
POLYESTER CLOTH
Polyester cloth for reinforcing waterproofing layers
0630/1
Special parts made of thermoplastic elastomer for waterproofing humid places.
Inner corner.
Outer corner.
Wall sealings.
Bottom sealings.
Joint sealing tape.
WATERPROOFINGMATERIALS FORHUMID PLACES
1205/1
20
1
1
25
25
25
10
20
FIBERGLASS MESHFOR WATERPROOFINGLAYERS
10 cm x 50 m
1 m x 200 m
1 m x 100 m 2(100 m )
2(200 m )
Roll
Roll
12 cm x 50 m
12 cm x 10 m
14 cm x 14 cm
21 cm x 21cm
12 cm x 12 cm
42,5 cm x 42,5 cm
Roll
Roll
1 m x 50 m 2(50 m )
10 cm x 50 m
Roll
Roll
100 cm wide meshmade of fiberglass, for total reinforcement of waterproofing layers (e.g. ISOFLEX membrane) in tough cases of multiple cracking.
2Weight: approx. 65 g/m .Mesh: 1,0 mm x 2,0 mm.
10 cm wide tapemade of the same material as above, used for the localreinforcement of ISOFLEX membrane along cracks or joints.
Thin polyester cloth2of 30 g/m , used for reinforcing waterproofing layers such
as ISOFLEX, AQUAMAT-ELASTIC etc.
10 cm wide tapemade of the same material as above, used for the localreinforcement of waterproofing layers along cracks, joints orwall-floor junctions.
Waterproofing Materials
14
1.5 Waterproofing Materials for JointsPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
TIXOPHALTE0624/6 24310 ml
Black
Elastoplastic, adhesive bituminous mastic sealant
ELASTOTAN0607/6 15600 ml
25280 ml
White15600 ml25
1.440
750
750
1.875
1.875280 ml
Grey
Elastomeric adhesive mastic sealant
Complementary Waterproofing Products - ReinforcementsPS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
Self-adhesive butyl tape
0719/1 8 cm x 10 m
ISOMAT BUTYL TAPE RollSelf-adhesive butyl tape coated with non-woven polypropylene. Used in damp areas for waterproofing under tiles, especially in places where there are cracks, joints etc. It can be covered with tile adhesives or brushable waterproofing materials.
Thickness: 0,9 mm.
6
0719/1
1 m x 15 mRoll
28
WATERPROOFING& UNCOUPLINGMEMBRANE
Suitable for waterproofing and uncoupling sound and problematic substrates. Especially used in damp areas and on terraces, balconies etc. It can be placed on walls or floors and on a variety of substrates such as concrete, cement mortars, old tile layers, mosaics, masonry etc.
Elastomeric adhesive mastic sealant with exceptional adhesion to all building materials e.g. glass, aluminium, wood, PVC etc. It features high mechanical strength and resistance to ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
Ready-to-use, cold-applied elastoplastic adhesive bituminous mastic sealant. It offers superior permanent flexibility and excellent adhesion to all kinds of materials under various conditions, even under water.Color: Black.
Consumption:Approx.1,4 kg/lit of joint volume.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
Waterproofing Materials for JointsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
15
Wat
erpr
oofin
g M
ater
ials
DOMOSIL-S0622/6
Mildew-resistant silicone sealant
280 mlTransparent
280 mlWhite
DOMOSIL-MICRO0622/6
DOMOSIL-POOL0622/6
High-performance, anti-mould silicone sealant with built-in ®Microban antibacterial protection technology. It remains color-
stable even after 10 years. Appropriate for sealing joints of 3-40 mm wide in non-porous materials, such as glass, aluminium, porcelain and non-porous ceramics. It is applied in high-humidity areas, such as kitchens, bathrooms, etc. It is not recommended for use in aquariums and cannot be overpainted.Color: Transparent, white.Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Anti-mould silicone sealant with built-in
®Microban technology
Silicone sealant for permanent water immersion
Silicone sealant resistant to permanent water immersion, such as swimming pools, aquariums etc. Appropriate for sealing vertical or horizontal joints 3-40 mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass structures etc. It cannot be overpainted. Color: Transparent.Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
280 mlTransparent
280 mlWhite
280 mlTransparent
High-performance, mildew-resistant silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminium, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high-moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, laboratories etc. It prevents fungal development that creates stains and black spots. It is not recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white.Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
High-performance, general-purpose silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminium, porcelain (e.g. tiles), ceramic etc.It cannot be overpainted.Color: Transparent, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
FLEX PU-200627/6
310 ml600 ml
600 ml
Grey
White
One-component, solvent-free polyurethane sealing mastic. Ideal for sealing joints where high elasticity is required. Suitable for joints in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Polyurethane joint sealant
DOMOSIL0623/6
General-purpose silicone sealant
280 mlTransparent
25
25
12
12
25
1220
20
25
25280 mlWhite
1.875
1.875
1.560
1.560
1.875
1.5601.000
1.000
1.875
1.875
Waterproofing Materials
16
Elastomeric adhesive mastic sealant with excellent bonding to any kind of building material, such as glass, aluminium, wood, PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Color: Grey, white, redbrown.
Consumption: Indicative consumption: 1 cartridge /10 linear meters.
0629/6
FLEX MS-45
Elastomeric adhesive sealant
280 ml
280 ml
Grey
White
25
25
25280 mlRedbrown
0626/6
Polyurethane adhesivesealant
FLEX PU-50 S
One-component, polyurethane adhesive mastic sealant with solvents. Ideal for sealing joints where high elasticity is required. Suitable for joints 5-50 mm wide in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
One-component, polyurethane adhesive mastic sealant with solvents. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. Suitable for joints 5-30 mm wide. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
0626/6
FLEX PU-30 S
Polyurethane sealant
25300 ml15600 ml
Grey
25300 ml15600 ml
White
25300 ml15600 ml
Grey
25300 ml15600 ml
White
Two-component joint sealant based on polyurethane resins. Ideal for sealing horizontal and vertical concrete joints on floors and structures like reservoirs, canals etc.Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces.Color: Grey.
Consumption: 1,45 kg/lit of joint volume.
0633/6
FLEX PU-2K
Two-component polyurethane joint sealant
5 kg(A+B)
108
(A+B)
Waterproofing Materials for JointsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
FLEX PU-400626/6
Polyurethane adhesivesealant
12310 ml
12310 ml
20
20
600 ml
600 ml
Grey
White
12
1.500
1.500
1.500
7501.560
7501.560
7501.560
7501.560
1.000
1.000
1.560
1.560
1.0001.560310 ml
20600 mlBrown
One-component, solvent-free polyurethane adhesive mastic sealant. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white, brown.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
17
Wat
erpr
oofin
g M
ater
ials
30
1 m x 30 m 2(30 m )
36
Roll
Bituminous roofing membrane
ROOF-TOP 800Roll weight: approx. 24 kg.
ROOF-TOP 600Roll weight: approx. 18 kg.
ROOF-TOP0704/4
Bituminous roofing membrane placed underneath the tile-bearing laths. It provides complete waterproofing and possesses great mechanical strength. It bears, a polyester reinforcement and is covered with a double, perforated polyethylene film.
1.6 Roofing MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
PS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
0719/4 6
Self-adhesive butyl tapewith aluminium coating
10 cm x 10 m RollSelf-adhesive butyl tape coated with aluminium. Mainly used
for waterproofing and sealing on roofs and terraces, in places such as chimney-roof junctions, roof vents etc. Suitable for repairs on roof tiles, sealing joints on the top of the roof etc.
Thickness: 0,6 mm.
ISOMAT BUTYL TAPE ALU
0625/6 30 m/box 30
WATERSTOP 1520 Roll
Bentonite swelling tape
Waterproofing Materials for JointsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Tape made of specially treated bentonite and caoutchouc. Suitable for sealing and waterproofing construction joints in concrete elements (e.g. work joints between concrete slab and concrete wall).
Dimensions: 15 mm x 20 mm.
Waterproofing Materials
18
CONCRETE &MORTAR ADDITIVES• Concrete Additives
• Mortar Additives
• Auxiliary Concreting Agents
2
eu
2.1 Concrete Additives
20
2. Concrete & Mortar Additives
BEVETOL-SPL0111/1
REOTOL-SPL0121/1
Concrete superplasticizer, type G
Concrete superplasticizer, type F
ADIUM 1100128/1
Broad-use, new-generation concrete superplasticizer
4
20 kg
*1000 kg*220 kg
*1000 kg
*1000 kg250 kg20 kg5 kg
240 kg20 kg
*1000 kg250 kg20 kg
BEVETOL-RD0129/1
Concrete set retarderand superplasticizer, type G
PLASTIPROOF0120/1
4
*1000 kg240 kg20 kg5 kg
239
23972
239
239
23972
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Concrete set retarder and superplasticizer (ASTM C-494: Type A, D and G, ELOT EN 934-2:T11.1 & T11.2). When added to the ready-mixed concrete, it improves its workability and extends its setting time. Suitable for preparing high-strength concrete, exposed concrete, pumpable concrete etc. Color: Dark brown.
Consumption: 0,2-0,8 kg per 100 kg of cement.
Plasticizing/waterreducing admixturefor concrete
Plasticizing-waterproofing admixture (ASTM C-494, type A, ELOT EN 934-2:T2 & T9). Used for formulating concrete with low water permeability and improved physical properties.Color: Dark brown.
Consumption:0,2-0,5 kg per 100 kg of cement.
Concrete superplasticizer (ASTM C-494, type A, D & G, ELOTEN 934-2:T11.1 and T11.2). When added to ready-mixedconcrete, it increases workability without decreasing strength.When added during concrete preparation, it reduces the amountof water required (reduction of w/c ratio), thus increasing both initial and final strength. Color: Dark brown. Consumption:As superplasticizer (Type G): 0,6-0,8 kg per 100 kg of cement. At smaller doses, it acts as a plasticizer.
Concrete superplasticizer (ASTM C-494, type A & F, ELOT EN 934-2:T3.1 and T3.2). When added to ready-mixed concrete, itincreases workability without decreasing strength. When addedduring concrete preparation, it reduces the amount of waterrequired (reduction of w/c ratio), thus increasing both initial and final strength.Color: Dark brown. Consumption:As superplasticizer (Type F): 0,2-1,4 kg per 100 kg of cement. At smaller doses, it acts as a plasticizer.
Liquid polycarboxylate-based admixture acting as concrete superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, it reduces water demand up to 20%. When added to the ready-mixed concrete it significantly improves its workability (fluid concrete), without need for additional water. Color: Light brown.
Consumption: 0,60-1,40 kg per 100 kg of cement.
Concrete Additives
21
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
BEVETOL-VZ0112/1
239
Concrete set retarder
ADIUM 1450128/1
New-generationsuperplasticizer forprecast concreteelements
239
ADIUM 1500128/1
New-generation superplasticizer for precast concrete elements
239
ADIUM 1300128/1
New-generation superplasticizer for long-distance transport of concrete
239
ADIUM 1320128/1
New-generationsuperplasticizer forconcrete with extendedslump retention
239
*250 kg20 kg
*1000 kg*220 kg
20 kg
*1000 kg*220 kg
20 kg
20 kg
*1000 kg*220 kg
20 kg
*1000 kg*220 kg
Liquid polycarboxylate-based admixture acting as as concrete superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. When added during preparation of concrete, it reduces water demand up to 20%. When added to the ready-mixed concrete, it significantly improves its workability (self-compacting concrete) without need for additional water. Ideal for long-distance transport of ready-mixed concrete when long slump retention and workability are required. Color: Dark brown. Consumption: 0,35-0,70 kg per 100 kg of cement.
Liquid polycarboxylate-based admixture acting as as concrete superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. When added during preparation of concrete, it reduces water demand up to 20%. When added to the ready-mixed concrete it significantly improves its workability (self-compacting concrete) without need for additional water. Ideal for long-distance transport of ready-mixed concrete when long slump retention and workability are required. Color: Brown. Consumption: 0,35-0,80 kg per 100 kg of cement.
Liquid polycarboxyliate-based admixture acting as concrete superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, it reduces water demand up to 30%. When added to the ready-mixed concrete itsignificantly improves its workability (self-compacting concrete), without need for additional water. Ideal for precast concrete elements. Color: Brown.
Consumption: 0,20-0,50 kg per 100 kg of cement.
Liquid polycarboxylate-based admixture acting as concrete superplasticizer, according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, it reduces water demand up to 25%. When added to the ready-mixed concrete it significantly improves its workability (self-compacting concrete), without need for additional water. Ideal for precast concrete elements. Color: Brown.
Consumption: 0,30-0,70 kg per 100 kg of cement.
Conc
rete
& M
orta
r Add
itive
s
NewFormula
NewFormula
Concrete set retarder (ASTM C-494, type B, ELOT EN 934-2:T8). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.Color: Dark brown.
Consumption:0,2-0,4 kg per 100 kg of cement.
Broad-use concrete set accelerator-antifreezing agent (ELOT EN 934-2:T6). It reduces setting time of concrete (accelerates setting) in cases where working fast is required and allows safe concreting at low temperatures.Color: Light yellow.
Consumption:1,0-2,0 kg per 100 kg of cement, depending on the desiredsetting time.
AQUAMAT-ADMIX0317/1
Crystalline waterproofingadmixture for concrete
22
4
ADINOL-RAPID 2H0124/1
Hardening accelerator for concrete
Hardening accelerator for concrete (ELOT EN 934-2:T7). It accelerates the process of growth of initial strength of concrete without negatively affecting the final strength. It is recommended for fast removal of formwork and a rapid return to service (e.g. road repairs). Color: Light yellow.
Consumption: 1,0-2,0 kg per 100 kg of cement, depending on the desired result.
Concrete Additives
RETADOL0122/1
Concrete set retarder-Plasticizer
54
392
72
239
392
72
20 kg
1400 kg
20 kg290 kg
5 kg
*1000 kg*250 kg
20 kg
1400 kg
20 kg320 kg
5 kg 4
ADINOL-RAPID0124/1
Broad-use concrete set accelerator - Antifreezing agent
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Concrete & Mortar Additives
* Packages marked with an asterisk are available by order.
Concrete waterproofing admixture in powder form that is added during concrete preparation, forming insoluble crystalline compounds. It improves water impermeability and does not affect vapor permeability of concrete. It remains permanently active and receives positive and negative hydrostatic pressure equally well. Suitable for waterproofing foundations, basements, tanks etc. It is classified with the CE marking as a water resisting concrete admixture, according to EN 934-2:T9. Color: Grey. Consumption: 0,8-1,0 kg per 100 kg of cement.
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2:T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.Color: Dark brown.
Consumption:0,2-0,3 kg per 100 kg of cement.
Colorless mortar plasticizer and set retarder that replaces lime.It is certified with the CE marking as air-entraining/plasticizing admixture for masonry mortar, according to EN 934-3:T2.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement. For plastering mortars: 75 g per 25 kg of cement.
23
2.2 Mortar AdditivesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
412
DOMOLIT-TR0103/1
Transparent mortar plasticizer - Lime replacement
124
412
ADINOL-DM0110/1
412
ADIFLEX-B0113/1
Elastifying agent
Waterproofing admixture for mortars and non-reinforced concrete with plasticizing properties. It is used for waterproofing cement mortars, non-reinforced concrete, plasters etc.Color: Light yellow.
Consumption:Cement mortars: 1 kg per 100 kg of cement. Plastering mortars: 1 kg per 100 kg of cement+lime. Concrete: 0,8 kg per 100 kg of cement.
Waterproofing admixture for mortars and non-reinforced concrete
Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to ISOMAT AK 9, ISOMAT AK 10 etc.). It replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subjectto vibration or contraction-expansion. Color: White.Consumption:5-10 kg per 25 kg bag of AQUAMAT, ISOMAT AK 9, ISOMAT AK 10 etc., depending on the desired elasticity.
DOMOLIT0103/1
Mortar plasticizer - Lime replacement
Conc
rete
& M
orta
r Add
itive
s
124
220 kg20 kg5 kg1 kg
150 kg20 kg10 kg5 kg1 kg
*220 kg20 kg5 kg1 kg
220 kg20 kg
1 kg5 kg
150 kg20 kg
1 kg5 kg
0114/1
ADIPLAST
Polymer latex for multiple improvements of mortars
Polymer latex (SBR) that improves the properties of mortars in several ways offering, e.g. increased bonding to substrate andflexibility, shrinkage reduction, higher resistance to chemicals and abrasion, enhanced water impermeability etc.Ideal for creating a bonding layer between old and newconcrete or mortar.Color: White.Consumption:Added to the mixing water at a ratio of ADIPLAST : water = 1:1 to 1:5.
23972
324
239
32472
23972
324
3393672
324
339
32472
Mortar plasticizer and set retarder that replaces lime.It is certified with the CE marking as air-entraining/plasticizing admixture for masonry mortar according to EN 934-3:T2. Color: Dark brown.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement.For plastering mortars: 75 g per 25 kg of cement.
24
Concrete & Mortar Additives
Mortar AdditivesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
2.3 Auxiliary Concreting Agents
Formwork deshuttering agent
SPLIT-20000211/1
412
DS-990116/1
Additive for tile adhesives & joint grouts
LATEX0127/1
4
324
3972
33972
32412
20 kg5 kg1 kg
150 kg20 kg
5 kg1 kg
Latex admixture -Bonding Agent
Polymer latex. When added into the building mortars andcoatings, it increases bonding to the substrate, provides waterimpermeability and elasticity. It is suitable for creating bondinglayers, repairing mortars, floor screeds resistant to abrasion,waterproof cement mortars, mortars resistant to chemicals,high strength, waterproof plasters etc. Color: White.Consumption:Added to the mixing water at a ratio of LATEX : water = 1:1 to 1:5.
ISOCURE0223/1
Concrete curing agent
Paraffin-based water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.Color: White. Consumption:
20,15-0,20 kg/m , depending on application conditions.
39
239
*140 lit20 lit
220 kg20 kg
Additive for tile adhesives and joint grouts. It significantly Improves properties such as bonding to the substrate, abrasion resistance, water-impermeability.Color: White.
Consumption:Added to the mixing water at a ratio of DS-99 : water= 1:1 to 1:2.
Deshuttering agent for all types of wooden or steel-faced formwork.Color: Light yellow.
Consumption:2Approx. 60 ml/m .
25
Auxiliary Concreting AgentsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Conc
rete
& M
orta
r Add
itive
s
1327/614
20600 g
POLYPROPYLENEFIBERS 900 g
ISOCURE-A0223/1
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need for removing ISOCURE-A in case of subsequent layers on the concrete surface. Color: White (transparent after drying).
2Consumption: 0,15-0,20 kg/m , depending on application conditions.
Acrylic concrete curing agent
20 kg
784
1.120
392220 kg
Paper bag
Plastic bag
* Packages marked with an asterisk are available by order.
Polypropylene fibers 12 mm long, for reinforcing concrete and mortars.
Consumption: 3· 600-900 g/m of concrete.
3 · 900-1200 g/m of mortar.
26
Concrete & Mortar Additives
TILE ADHESIVES& GROUTS• Tile Adhesives
• Tile Grouts
• Adhesives for Special Applications
• Complementary Products
3
eu
ISOMAT AK 90553/3
25 kg20 kg
25 kgGrey
White
3.1 Tile Adhesives
ISOMAT AK 110550/3
ISOMAT AK 120552/3
ISOMAT AK 20
25 kg
25 kg
25 kg
15 kg25 kg
25 kg
25 kg
5 kg
5 kg 4
4
ISOMAT AK 100501/3
4
4
5463
54
54
54
9054
54
54
54
160
160
54160
54160
25 kg
25 kg
5 kg
5 kg
28
3. Tile Adhesives & Grouts
Grey
Grey
Grey
Grey
White
White
White
White
Cement-based tileadhesive C1
Cement-based tileadhesive, with no verticalslip C1 T
High-performance,polymer-modified tileadhesive C2 E
High-performance,polymer-modified tileadhesive C2 TE
High-performance,flexible, polymer-modifiedtile adhesive C2 TE S1
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High-performance, polymer-modified adhesive for ceramic and porcelain tiles on critical substrates. It is characterized by extended open time and no vertical slip. Also suitable for fixing tiles on common substrates such as concrete, screeds, brickwork, plaster. For indoor and outdoor applications, on walls and floors. It offers high initial and final adhesive strength and resistance to moisture. It is classified as C2 TE adhesive, according to EN 12004.Color: Grey, white.
2 1,5-4,0 kg/m . Consumption:
High-performance, flexible, polymer-modified adhesive for ceramic and porcelain tiles on critical substrates. It is characterized by extended open time, no vertical slip and flexibility. Also suitable for fixing natural stone and decorative bricks, on concrete, screeds etc. Recommended for substrates like old tile layers, floors with in-floor heating, swimming pools etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S1 adhesive, according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
Cement-based tile adhesive. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications. It is classified as C1 adhesive, according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
Cement-based tile adhesive, with no vertical slip. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications.It is classified as C1 T adhesive, according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
High-performance, polymer-modified tile adhesive with extended open time. Suitable for fixing ceramic and porcelain tiles on all common substrates, such as concrete, screeds, brickwork, plaster etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 E adhesive, according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
0558/3
flex
extraflex
Tile Adhesives
29
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAT AK 220549/3
5490
5425 kg
25 kg15 kg
Grey
White
High-performance,flexible, polymer-modifiedtile adhesive C2 TE S1
5 kg 4 160
5 kg 4 160
extraflex
ISOMAT AK 250582/3
High-performance, elastic, polymer-modified tile adhesive C2 TE S2
High-performance, elastic, polymer-modified adhesive for fixing all types of tiles on deformable and vibratile substrates. It is characterized by extended open time, no vertical slip and elasticity. Also suitable for fixing tiles on concrete, screeds, plaster, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces, etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S2 adhesive, according to EN 12004 and EN 12002.Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
ISOMAT AK-LIGHT0572/3
5418 kg
Light-weight, elastic tile adhesive C2 TE S2
Light-weight, elastic adhesive for fixing ceramic and porcelain tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high elasticity. Also suitable for fixing natural stone and decorative bricks on concrete, screeds, plaster etc. Ideal in case high elasticity and adhesion are required like old tile layers, gypsum boards etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S2 adhesive, according to EN 12004 and EN 12002.Color: Grey.
2Consumption: 1,0-3,0 kg/m .
0572/35415 kg
Light-weight, flexible tile adhesive C2 TE S1
Light-weight, flexible adhesive for fixing all types of tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high flexibility. Also suitable for tiling on concrete, screeds, plaster, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S1 adhesive, according to EN 12004 and EN 12002.Color: White.
2Consumption: 1,0-3,0 kg/m .
High-performance, flexible, polymer-modified adhesive for fixing all types of tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high flexibility. Also suitable for fixing tiles on concrete, screeds, gypsum board, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S1 adhesive, according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
flex
flex
flex
ISOMAT AK 210560/3
High-performance, polymer-modified, cement-based tile adhesive. It is characterized by extended open time and no vertical slip. Due to its special composition, it minimizes the dust produced while mixing it with water. Suitable for fixing ceramic and porcelain tiles, natural stone, decorative bricks etc. on walls or floors on substrates where high adhesion, elasticity and moisture resistance are required. For indoor or outdoor applications. It is classified as C2 TE S1 adhesive, according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 2,0-4,0 kg/m .
5425 kgGrey
LowDust
High-performance, polymer-modified adhesive for critical substrates - Low-Dust Technology
Tile
Adh
esiv
es &
Gro
uts
ISOMAT AK-ECOLIGHT
25 kgWhite
54
454
160
5425 kg
25 kg5 kg
Grey
White
30
Tile Adhesives & Grouts
Tile Adhesives
ISOMAT AK-RAPID0557/3 5425 kg
25 kg5 kg 4 160
54
Grey
White
Fast-setting polymer- modified tile adhesiveC2 FT
ISOMAT AK-ELASTIC0562/3
54(A)
48
54(B)(A+B)
(A+B) (A+B)
35 kg
7 kg
High-performance,two-component elastictile adhesive C2 E S2
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High performance, two-component elastic tile adhesive. It is -characterized by extended open time and exceptional elasticity. Suitable for fixing ceramic and mosaic tiles wherever high elasticity and adhesion are required like old tile layers, terraces, swimming pools, floors with in-floor heating etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 E S2 adhesive, according to EN 12004 and EN 12002. Packages: 35 kg (25 kg A+10 kg B) & 7 kg (5 kg A+2 kg B).Color: White.
2Consumption: 1,5-4,0 kg/m .
Fast-setting, polymer-modified, cement-based tile adhesive. Suitable for fixing absorptive or non-absorptive tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. Ideal in cases where the surfaces have to be delivered fast for use, e.g. work areas etc. It is qualified as non-slip (T: slip resistant). For indoor and outdoor applications. It is classified as C2 FT adhesive, according to EN 12004.Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
0557/3
Two-component, fast-setting, flexible tile adhesive. It is characterized by extended open time and flexibility. Suitable for fixing ceramic and porcelain tiles on concrete, screeds, plaster, mosaic, gypsum boards, terraces, floors with in-floor heating, swimming pools etc. Ideal for areas that must be ready for use within short time. For indoor and outdoor applications, on walls and floors. It is classified as C2 FE S2 adhesive, according to EN 12004 and EN 12002. Package: 33 kg (25 kg A+8 kg B).Color: White. Consumption: 1,5-4,0 kg/ 2m .
Two-component, fast-setting, flexible tile adhesive C2 FE S2
33 kg(A+B)
54(A)54(B)
ISOMAT AK-STONE0556/3 5425 kg
25 kg 54
Grey
White
Coarse-grained tile and natural stone adhesiveC1 E
ISOMAT AK-RAPID FLEX0557/3
54
5425 kg
25 kg
Grey
White
Fast-setting, flexible, polymer-modified tile adhesive C2 FT S1
High-performance, fast-setting, flexible, polymer-modified tile adhesive. It is qualified as non-slip (T: slip resistant). Suitable for fixing absorptive or non-absorptive tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc., especially when high adhesion, elasticity and resistance to moisture is required. Ideal in cases where the surfaces have to be delivered fast for use, e.g. work areas etc. For indoor and outdoor applications. It is classified as C2 FT S1 adhesive, according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
elastic
ISOMAT AK-MEGARAPID
extraflex
flex
Cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing tiles or natural stone on walls or floors on surfaces made of concrete, brickwork, plaster etc. It has increased open time for application. For indoor and outdoor applications. It is classified as C1 E adhesive, according to EN 12004. Color: Grey, white.
Consumption:22,0-8,0 kg/m .
31
Tile Adhesives
0574/3
ISOMAT AK-PRIMER
Adhesion primer for tile adhesives
Highly-penetrative, polymer emulsion used as adhesion primer on smooth, absorbent or non-absorbent substrates, before the application of cement-based tile adhesives.Color: Light purple.
Consumption:2100-200 g/m , depending on the absorptivity of the substrate.
ISOMAT AK-FLUX0563/3
54
Polymer-modifiedadhesive for large tiles & irregular substrates C2 E S1
Polymer-modified, cement- based tile adhesive with increased open time. After mixing with water, it becomes fluid. Suitable for thick layers (up to 20mm). Fields of application: Fixing absorptive and non-absorptive floor tiles on various surfaces. Ideal for fixing large tiles by ‘full-bed’ laying and in case of leveling and fixing tiles on irregular substrates. For indoor and outdoor applications. It is classified as C2 E S1 adhesive, according to EN 12004 and EN 12002.Color: Grey.
2Consumption: 2,0-8,0 kg/m .
412
72324
39
UNI-PRIMER0209/1 4
12
3972
324
Acrylic, water-based primer
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAT AK-GRAND0543/3 5425 kg
Grey
25 kg 54White
Polymer-modified tile adhesive for decorative overlays C2 E
25 kg 54Beige
Coarse-grained, polymer-modified, cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing and pointing decorative overlays (artificial stone, slate, decorative bricks etc.) on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. It has increased open time for application. For indoor and outdoor applications. It is classified as C2 E adhesive, according to EN 12004.Color: Grey, white, beige.
2Consumption: Fixing: 2,0-8,0 kg/m . 2 Pointing: 0,5-5,0 kg/m .
ISOMAT AK-MARBLE0555/3
54
25 kg
5 kg1 kg
20 kg
20 kg5 kg1 kg
25 kg
Polymer-modified, marble and granite adhesive C2 E S1
Fast-setting, polymer-modified, cement-based marble and granite adhesive. Suitable for fixing marble or granite on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. It prevents staining of sensitive overlays, such as marble layers, due to fast retention of water. It has increased open time for application. For indoor and outdoor applications. It is classified as C2 E S1 adhesive, according to EN 12004 and EN 12002.Color: White.
2Consumption: 1,5-6,0 kg/m .
Tile
Adh
esiv
es &
Gro
uts
Ready-to-use acrylic water-based primer. It stabilizes weak, loose or crumbling plasters.Color: White. Consumption:
2100-200 g/m .
ISOMAT AK 500575/3
Two-component epoxy tile adhesive R2T
Two-component, solvent-free epoxy adhesive. It is suitable for fixing every type of tiles to several substrates, on walls or floorings. It has high adhesion and chemical resistance. It can also be used for pointing tile joints. It is classified as R2T adhesive, according to EN 12004.Color: Light grey.Consumption:
2Approximately 1,75 kg/m /mm of layer thickness.
10 kg
5 kg
(A+B)
(A+B)
MULTIFLEX0517/3
22
25 kg5 kg1 kg
High-performance, ready-to-use, pasty tile adhesive D2T
Ready-to-use, pasty tile adhesive based on acrylic resins. Ideal for minor repairs due to its fast and easy application. Suitable for fixing tiles on surfaces such as concrete, plaster, cement-board, wood etc. Also appropriate for areas with high humidity such as bathrooms, kitchens, etc. It is used indoors on walls and floors and outdoors on walls. It is classified as D2T adhesive, according to EN 12004. Color: White.
2Consumption: 1,0-3,0 kg/m .
Tile AdhesivesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
MULTIFILL0511/3
5 kg
44
110
24110264
1604 bags/
box
01 White
05 Light Grey
15 Manhattan Grey
03 Grey04 Pearl Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
17 Anemone18 Pearl Beige
19 Mocha
06 Bahama Beige
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel
14 Cotto
20 Maroon
09 Light Brown08 Brown07 Redbrown
25 Crocus
Cement-based colored grout for pointing tile joints on walls or floors, for indoor and outdoor applications.It is classified as CG2 WA tile grout, accordingto EN 13888.
It is available in 2 types:
· MULTIFILL 2-5, suitable for joint width from 2 mm to 5 mm. · MULTIFILL 3-15, suitable for joint width from 3 mm to 15 mm.
Consumption:20,2-2,0 kg/m , depending on the tile size
and the joint width.
Colored tile grout CG2 WA
0503/3
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
3.2 Tile Grouts
32
Tile Adhesives & Grouts
30 Cement Grey27 Orange26 Green
33
MULTIFILL
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
31 Ceramic32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
01 White
05 Light Grey
03 Grey04 Pearl Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
06 Bahama Beige
14 Cotto
09 Light Brown08 Brown07 Redbrown
10 bags/box
2 kg 300
Tile Grouts
15 Manhattan Grey
30 Cement Grey
17 Anemone18 Pearl Beige19 Mocha
22 Magnolia23 Oregon
24 Cinnamon
16 Light Ochre
21 Caramel20 Maroon
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
25 kg 5401 White
05 Light Grey03 Grey
06 Bahama Beige
0511/30503/3
Tile
Adh
esiv
es &
Gro
uts
MULTIFILL 2-5 is available in all 34 colors.MULTIFILL 3-15 is available only in colors marked with an asterisk (*). 30 Cement Grey
10 Dark Grey21 Caramel
5 kg 1604 bags/
box
Tile GroutsCOLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
MULTIFILL RAPID 1-80520/3
Fast-setting, cement based tile grout enriched with resins CG2 WA
Fast-setting, polymer-modified, cement-based tile grout. It offers high mechanical strength, excellent color stability and high water-repellence. It provides a smooth and glossy final surface. Suitable for joints 1-8 mm wide. Used for grouting any kind of tiles on walls or floors, indoors or outdoors. It is classified as CG2 WA tile grout, accordingto EN 13888.
Consumption:20,2-2,0 kg/m , depending on the tile size and
the joint width.
4 kg 1604 bags/
15 Manhattan Grey17 Anemone
01 White
05 Light Grey03 Grey
30 Cement Grey
10 Dark Grey06 Bahama Beige
box
4 kg 1604 bags/
box
01 White
05 Light Grey
15 Manhattan Grey
03 Grey04 Pearl Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
17 Anemone18 Pearl Beige19 Mocha
06 Bahama Beige
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel
14 Cotto
20 Maroon
09 Light Brown08 Brown07 Redbrown
25 Crocus
27 Orange26 Green
MULTIFILL SMALTO 1-8 is a colored, polymer-modified, cement-based tile grout. It offers high mechanical strength, superb color stability and great water-repellence. It contains special bacteriostatic agents, which block the formation of bacteria on the grout. It gives a smooth, glossy final surface. Suitable for joints 1-8 mm wide. It is classified as CG2 WA tile grout, accordingto EN 13888.
Consumption:20,2-2,0 kg/m , depending on the tile size and
the joint width.
0511/3
Tile grout porcelain-textured, water-repellentCG2 WA
SMALTO 1-8
MULTIFILL
34
Tile Adhesives & Grouts
30 Cement Grey31 Ceramic32 Mykonos Blue33 Yellow
35
Tile GroutsCOLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
0511/3SMALTO 1-8
MULTIFILL 34 Mint35 Tropical Sea36 Cypress
01 White
05 Light Grey
03 Grey04 Pearl Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
06 Bahama Beige
14 Cotto
09 Light Brown08 Brown07 Redbrown
2 kg 240
15 Manhattan Grey
30 Cement Grey
17 Anemone18 Pearl Beige19 Mocha
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel20 Maroon
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
20 kg 5401 White
05 Light Grey03 Grey
06 Bahama Beige
Tile
Adh
esiv
es &
Gro
uts
4 kg 1604 bags/
box
10 bags/box
Paint Premixed Plasters
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
Tile Grouts
MULTIFILL-STONE0556/3
25 kg01 White03 Grey06 Bahama Beige
Colored cement mortar for building and grouting stones CG2 WA acc. EN 13888, M15 acc. EN 998-2
Colored, polymer-modified cement mortar for building and grouting natural or artificial stone, on walls and floors. It provides high initial and final adhesive strength, high mechanical properties and exceptional color stability. Suitable for joint width 5-40 mm. Due to the special particle size granulation of the product, the mortar does not give way under the weight of the masonry units. It is classified as M15 mortar for masonry, according to EN 998-2 and as CG2 WA grout, according to EN 13888.
10 Dark Grey
MULTIFILLMARBLE 0-30555/3
Grout for marbles CG2 WA
Colored, fine-grained, polymer-modified, cement-based grout. It offers high mechanical strength, superb color stability and great water-repellence. Suitable for joint width up to 3 mm. It is used for grouting marbles, granites, tiles, glass and marble mosaic, on walls and floors, indoors and outdoors. It is classified as CG2 WA tile grout, accordingto EN 13888.
Consumption: 20,2-1,3 kg/m , depending on the marble size
and the joint width.
06 Bahama Beige17 Anemone
01 White02 Black05 Light Grey
4 kg
54
1604 bags/
box
16 Light Ochre
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
MULTIFILL-EPOXYTHIXO0539/3
Two-component epoxy grout and tile adhesive
10 kg
5 kg
(A+B)
(A+B)
2 kg(A+B)
MULTIFILL-ELASTIC0569/3 25
44
110
140
1.500280 mlCartr.
Colored elastic tile joint sealant
36
Tile Adhesives & Grouts
Two-component, solvent-free epoxy system. It is applied wherever high mechanical and chemical resistance is required. Ideally combined with special tiles for industrial use. Suitable for fixing wall and floor tiles and pointing tile joints in industrial spaces, like breweries, dairies, swimming pools, kitchens etc. It has excellent workability and is easily cleaned with water, before it hardens. Suitable for joint widths 1,5-12 mm. It is classified as RG tile grout, according to EN 13888 and as R2T adhesive, according to EN 12004. Color: White, grey, light grey, black, bahama beige. Other colors by order (minimum quantity 120 kg). Consumption: 0,2-5,0 kg/m².
One-component, colored, elastic joint sealant. Used for pointing tile joints on walls or floors, especially where high elasticity is required (expansion joints etc.). Suitable for indoor and outdoor applications.Color: White, light grey, grey, dark grey, anemone, bahama beige, caramel.
Consumption:Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
37
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
Tile Grouts
0538/3
MULTIFILL-EPOXYFLOW
Two-component epoxy grout and tile adhesive for floorings
Two-component, solvent-free epoxy system. It is applied wherever high mechanical and chemical resistance is required. It is ideally combined with special tiles for industrial use. It is suitable for fixing floor tiles and pointing tile joints in industrial spaces, like breweries, dairies, as well as swimming pools, kitchens etc. It has excellent workability and is easily cleaned with water, before it hardens. Suitable for joint widths 1,5-12 mm. It is classified as RG tile grout, according to EN 13888 and as R2 adhesive, according to EN 12004.Color: Light grey, white. Other RAL colors by order (minimumquantity 120 kg).
2Consumption: 0,2-5,0 kg/m .
10 kg
5 kg
(A+B)
(A+B)
10 kg
5 kg(A+B)
(A+B)
0540/3
ISOMAT GLITTER Colored metallic aggregates which are added to the epoxy grout MULTIFILL-EPOXY GLITTER forming a colored, decorative grout and ensuring a special aesthetic result. ISOMAT-GLITTER is added at a ratio of up to 10% by weight.
100 Silver, 110 Green,120 Τurquoise, 130 Violet,140 Pink, 150 Red,160 Red Brown, 170 Bronze,180 Beige, 190 Gold.
200 g 20
MULTIFILL-EPOXYGLITTER0540/3
Three-component decorative epoxy grout
Three-component decorative, solvent-free epoxy grout. The addition of ISOMAT-GLITTER forms a colored, decorative grout that ensuves a special aesthetic result. It is applied where high mechanical and chemical resistance is required. Ideally combined with glass mosaic tiles and tiles with high chemical resistance. Suitable for pointing wall or floor tile joints in residences, clubs, shops, industrial sites etc. It is classified as RG tile grout, according to EN 13888.Color: 10 selected colors.
2Consumption: 0,1-4,0 kg/m .
2 kg(A+B)
44
110
44
110
110
3.3 Adhesives for Special Applications
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
ISOMAT AK-T330335/3
5425 kg
Adhesive for thermal insulation boards
Cement-based adhesive for thermal insulation boards. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates.Color: Grey.
Consumption: 3,0-4,0 kg/m².
Tile
Adh
esiv
es &
Gro
uts
White
Light grey
ISOMAT AK-THERMO0335/3
5425 kg
Fiber-reinforcedadhesive for thermalinsulation boards
Fiber-reinforced, polymer-modified, cement-based adhesive. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it is the ideal substrate for the subsequent layer of plaster. It has increased open time. It is classified as GP CS IV, W2 rendering mortar, according to EN 998-1 and as C2 E adhesive, according to EN 12004.Color: White.
2Consumption: As an adhesive: 2,0-4,0 kg/m . 2 As a reinforced mortar: 1,5 kg/m /mm.
Adhesives for Special Applications
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
Fiber-reinforced, polymer-modified, cement-based adhesive. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it is the ideal substrate for the subsequent layer of plaster. Color: Grey, white.
Consumption: As an adhesive: 3,0-4,0 kg/m². As a reinforced mortar: approx. 1,5 kg/m²/mm.
ISOMAT AK-T550335/3
5425 kg
5425 kg
Fiber-reinforced, polymer-modified cement-based adhesive. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it is the ideal substrate for the subsequent layer of plaster. It is the GP CS IV, W2 rendering mortar, according to EN 998-1 and as C2 adhesive, according to EN 12004. Color: Grey, white. Consumption: As an adhesive: 3,0-4,0 kg/m². As a reinforced mortar: approx. 1,5 kg/m²/mm.
Fiber-reinforced adhesive for thermal insulation boards
ISOMAT AK-T350335/3 54
54
25 kg
25 kg
Grey
Grey
White
White
Fiber-reinforced adhesive for thermal insulation boards
ISOMAT AK-T650335/3
5425 kgPolymer-modified, cement-based adhesive. Suitable for fixing mineral wool boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed mineral wool boards, it is the ideal substrate for the subsequent layer of plaster. It is classified as GP CS IV, W2 rendering mortar, according to EN 998-1.Color: Grey.
2Consumption: As an adhesive: 5,0 kg/m . 2 As a reinforced mortar: approx. 1,5 kg/m /mm.
Adhesive for mineralwool boards
0335/32425 kgISOMAT AK-THERMO
ACRYL
Ready-to-use, pasty coating, based on acrylic resins. It provides high elasticity and moisture resistance. Ideal for the external thermal insulation of buildings when applied in combination with the organic plasters MARMOCRYL. When reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent organic plaster. Moreover, it can be used as an adhesive for fixing thermal insulation boards on the facade of buildings. Color: White.Consumption: As an adhesive: 2,0-5,0 kg/m². As a reinforced coat: approx. 3,0-4,0 kg/m².
Acrylic, fiber-reinforced coating for thermal insulation boards
38
Tile Adhesives & Grouts
39
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
Adhesives for Special Applications
0577/3
ISOMAT MT 200
Pre-mixed, cement-based mortar for marbles
Pre-mixed, cement-based mortar for fixing marbles. It is used only with the addition of water. It simplifies and accelerates the application.Color: White.
Consumption: 2Approx. 15,0 kg/m /cm of layer thickness.
5425 kg
ISOMAT AK-GLASS0324/3 4
54160
25 kg5 kg
Polymer-modified adhesive for fixing and pointing glass-blocks
0571/3
Refractory mortar for laying and grouting firebricks
25 kg5 kg
ISOMAT AK-FIRE4
54160
ISOMAT AK-BLOCK0544/3 54
54
25 kg
25 kg
Polymer-modifiedadhesive for aerated concrete masonry
Refractory cement mortar for firebricks. Suitable for laying and grouting all kinds of firebricks in areas where high temperatures are developed (fireplaces, wood ovens, stoves, barbecues, chimneys etc.). It provides excellent resistance to high temperatures and extensive temperature changes, high initial and final adhesive strength and resistance to moisture. Color: Grey.Consumption:Indicatively, for firebricks with dimensions 20x10x3 cm and
2joint width 1 cm the consumption is about 5 kg/m .
Grey
White
ISOMAT AK-EPOXY
0573/3NORMAL
Two-component epoxy marble and granite adhesive
Two-component solvent-free epoxy adhesive. Suitable for fixing marbles, granites and most of the building materials to several substrates, on walls or floors. After hardening, it obtains great chemical resistance and high compressive strength.Easy to use due to the simple mixing ratio of the two components (A:B = 1:1 by volume).It is classified as R2T adhesive, according to EN 12004.Color: Light yellow.Consumption:Depends on the dimensions and weight of the bonded material.
20 lit 22
18
70
(A+B) (A+B)
(A+B)
(A+B)4 lit
1 lit
(A+B)
(A+B)
Tile
Adh
esiv
es &
Gro
uts
High-performance, polymer-modified cement-based adhesive. Used for fixing aerated concrete elements. It has increased open time for application.Color: Grey, white.
Consumption:3Approx. 13,0 kg for building 1 m of aerated concrete wall.
Polymer-modified, cement-based adhesive for glass blocks. Used for fixing and pointing glass blocks.Color: White.
Consumption:2Approx. 13,0 kg for building 1 m of wall with ordinary glass
blocks.
Adhesives for Special Applications
0631/3
ISOMAT AK-PARQUET 3612 kg/can
0630/3
MONTAGE-W310 ml
Solvent-free pasty adhesive for fast and powerful bonding
High-performance, solvent-free adhesive based on acrylic emulsion. It is used for fast and powerful bonding on all kinds of porous substrates, like wood, concrete, masonry, gypsum boards etc. No need for drilling, screwing or nailing. Suitable for bonding polystyrene insulation boards. Color: Beige.
Consumption:Typical consumption: 1 cartridge/12 linear meters.
25Cartr.
Cartr.
High-performance, one-component polyurethane adhesive for wooden floorings. Suitable for fixing and bonding all types of wooden floorings such as solid, lam parquet, strips, longstrips, planks, on cementious floors, wooden floors, ceramic tiles, marble, mosaic, metal surfaces, etc. Color: Beige.
Consumption:21,2-1,4 kg/m .Polyurethane adhesive
for wooden floorings
0630/3
MONTAGE-S310 ml
Pasty adhesive for fast and powerful bonding
High-performance, pasty adhesive in a solvent solution. It is based on caoutchouc and synthetic resins. It is used for fast and powerful bonding on almost all construction materials. No need for drilling, screwing or nailing. Not suitable for bonding mirrors, polystyrene insulation boards or other materials sensitive to solvents. Color: Beige.
Consumption:Typical consumption: 1 cartridge/12 linear meters.
25Cartr.
ISOMAT AK-EPOXYFAST0573/3
Two-component, fast-setting epoxy marble and granite adhesive
Two-component, solvent-free epoxy adhesive. Suitable for fixing marbles, granites and most of the building materials to several substrates, on walls or floors. Suitable for fixing on vertical surfaces due to its fast setting (7 minutes). After hardening, it has great chemical resistance and high compressive strength. Easy to use due to the simple mixing ratio of the two components (A:B = 1:1 by volume). It is classified as R2T adhesive, according to EN 12004. Color: Grey-green.Consumption: Depends on the dimensions and weight of the bonded material.
22
18
70
(A+B)
(A+B)
(A+B)
20 lit(A+B)
4 lit
1 lit
(A+B)
(A+B)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
SUPERBOND-PU0631/3 25
1.500
1.500
1.500280 mlOne-component high-performance, polyurethane adhesive, without solvents. It provides powerful bonding on all construction materials such as wood, concrete, aluminium, tiles etc. It is also suitable for every wood construction and for wood furniture industry. Color: White.
Consumption: Indicative consumption: 1 cartridge/12 linear meters.Polyurethane adhesive
for powerful bonding
40
Tile Adhesives & Grouts
41
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
WATERPROOFING& UNCOUPLINGMEMBRANE0719/1
1 m x 15 mRoll
28
3.4 Complementary Products
UNCOUPLING
MEMBRANE0719/3
Suitable for uncoupling sound and problematic substrates. It allows subsequent coverings to function as independent layers in relation with the substrate. It can be placed on walls or floors in a variety of substrates such as concrete, cement mortars, old layers of tiles, mosaics, masonry etc.
1 m x 30 mRoll
28
Suitable for waterproofing and uncoupling sound and problematic substrates. Especially used in damp areas and on terraces, balconies etc. It can be placed on walls or floors and on a variety of substrates such as concrete, cement mortars, old tile layers, mosaics, masonry etc.
Tile
Adh
esiv
es &
Gro
uts
42
Tile Adhesives & Grouts
REPAIRINGMATERIALS • Strengthening & Repairing of Concrete
• Construction & Repairing of Masonry Wall
• Putties
• Protective Materials & Varnishes
• Cleaning Agents
• Elastic Joint Sealants
• Bituminοus Repairing Materials
4
eu
FERROSEAL0331/1
4.1 Strengthening & Repairing of Concrete4.1.1 CEMENT-BASED MATERIALS
44
4. Repairing Materials
Polymer-modified brushable cement mortar used forprotecting reinforcement elements from corrosion and forcreating the bonding layer between old and new concrete ormortar.Color: Redbrown.
Consumption:As anticorrosive coating: 0,07-0,13 kg/m of reinforcement element.
2As bonding agent: approx. 2,0 kg/m .
Cement-based anticorrosive coating for reinforcement elements - Bonding agent
DUROCRET0310/1
Redbrown
5 kg25 kg
25 kg
25 kg5 kg
5 kg
Grey
White
Polymer-modified cement mortar
DUROCRET-PLUS0310/1
Polymer-modified, fiber-reinforced cement mortar. Suitable for patching and repairing concrete, masonry and plaster, forming fillets, ridge tiles on roofs etc.It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
Consumption: Approx. 16,0 kg/ /cm 2m of layer thickness.For formin : 1,9-2,7 kg/m.g fillets
Polymer-modified, fiber-reinforced repairing cement mortar
DUROCRET-FAST0310/1
54Fast-setting, polymer-modified cement mortar. It provides high adhesion to the substrate, excellent workability and abrasion resistance. Suitable for repairing works on concrete, screeds, masonry etc. Working time: 45 minutes.It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
2Consumption: Approx. 17,0 kg/m /cm of layer thickness. For formin : 1,9-2,7 kg/m.g fillets
Fast-setting, repairing cement mortar
FERROSEAL-MCI0331/1
Impregnation-corrosioninhibitor
Water-based emulsion with high penetrating ability that acts as a corrosion inhibitor of steel reinforcement. FERROSEAL-MCI penetrates the concrete and forms a protective layer on the surface of the reinforcing steel. Ideal for repairs of reinforced concrete. Also suitable as an anti-corrosive protection for structures of reinforced concrete that are exposed to aggressive environments such as bridges, aqueducts etc. Color: Transparent.
2Consumption: Approx. 0,5 kg/m .
4
4
4
15
124
54160
54
54160
160
54
32
24075
39
32472
25 kg
25 kg
15 kg
1 kg5 kg
20 kg
1 kg5 kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
NEW
Polymer-modified cement mortar, suitable for patching and repairing concrete, masonry and plaster, forming fillets at wall to floor junctions, fixing ridge tiles on roofs (redbrown version), etc.It is classified as PCC R2 mortar for concrete repairs, accordingto EN 1504-3. Color: Grey, white, redbrown.
Consumption:2Approx. 15,0 kg/m /cm of layer thickness.
For formin : 1 9-2 7 kg/m.g fillets , ,
Strengthening & Repairing of ConcreteCEMENT-BASED MATERIALS
45
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
RAPICRET0316/1 4
54160
25 kg5 kg
Fast-setting patching mortar
DUROCRET
PENETRATE0310/1
5425 kg
Crystalline waterproofing & repairing cement mortar
5425 kgPolymer-modified, extra fine-grained cement-based mortar. It provides water repellency and very good adhesion to the substrate. After hardening a smooth final surface is formed. It is used in thin layers (1-3mm) as a cement mortar on cementicious substrates. Suitable for applications such as stairs, floors, walls and also for special constructions such as built sanitary ware (sinks, showers etc.). It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: White, grey, light grey, light ochre, mocha, crocus.
2Consumption: Approx. 1,4 kg/m /mm of layer thickness.
DUROCRET-DECOFINISH0310/1
Extra fine-grained, cement-mortar for surface finishing on floors and walls
WhiteGrey
Light GreyLight OchreMochaCrocus
FIX-RAPID0315/1
4 kg 4 160
Fast-setting cement for anchoring
Fast-setting cement. It is used for quick repairs, fixing, anchoring, patching of cavities or holes etc. in case the surface needs to be durable and promptly used. Color: Grey.
Consumption: Approx. 1,6 kg FIX RAPID for the preparation of 1 lit of hardened mixture.
Repa
iring
Mat
eria
ls
DUROCRET-DECO0310/1
5425 kgPolymer-modified, fiber-reinforced, cement mortar. It provides excellent adhesion to the substrate, waterproofing and abrasion resistance. For indoor and outdoor use in a variety of applications, on floors and walls, for a special aesthetic result (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.). It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: White, grey, light grey, light ochre, mocha, crocus.
2Consumption: Approx. 1,5 kg/m /mm .of layer thickness
Cement mortar for surface finishing on floors and walls
Repairing and waterproofing cement mortar. It is suitable for indoor and outdoor applications on concrete or brickwork, forming fillets at wall to floor junctions etc. Also it can be used for waterproofing concrete elements, in cases ranging from simple moisture to water under pressure. Suitable for waterproofing of basements, foundations, manholes, water tanks, sewage tanks etc. It is classified as CC R2 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
2Consumption: Approx. 17,0 kg/m /cm of layer thickness. For forming fillets: 1,9-2,7 kg/m.
Fast-setting cement mortar for patching and repairing concrete elements, fixing, anchoring, cavity sealing, forming fillets at wall to floor junctions and generally in case the surface needs to be durable and promptly used.It is classified as PCC R3 mortar for concrete repairs, accordingto EN 1504-3. Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm of layer thickness.
WhiteGrey
Light GreyLight OchreMochaCrocus
46
Repairing Materials
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
MEGAGROUT-1000323/1
5425 kg
High-strength, non-shrinking pourable cast grout for repairs and strengthening
0322/125 kg 54
Fast-setting,fiber-reinforced,high-strength repairing cement mortar
Fast-setting, high-strength, fiber-reinforced, repairing cement mortar. Suitable for fast repairs in concrete elements. It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine. It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
Consumption: 2Approx. 17,5 kg/m /cm of layer thickness.
MEGACRET-400322/1
25 kg 54
High-strength, fiber-reinforced repairing mortar
4 1605 kg
5425 kgMEGACRET-40 MCI0322/1
High-strength, fiber-reinforced, repairing cement mortar, with built-in corrosion inhibitor
High-strength, fiber-reinforced, repairing cement mortar, with built-in corrosion inhibitor. Suitable for repairs of exposed concrete due to its corrosion inhibiting properties. It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine. It is classified as PCC R4 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
Consumption: 2Approx. 17,5 kg/m /cm of layer thickness.
MEGACRET-40 FAST
MEGACRET-100334/1
5425 kg
High-strength, fiber-reinforced repairing mortar
High-strength, fiber-reinforced, repairing cement mortar. Suitable for highly demanding repairs of concrete elements. It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine.It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm of layer thickness.
High-strength, fiber-reinforced, thixotropic, repairing cement mortar. Suitable for highly demanding repairs of concrete elements. It is applied in layers up to 10 mm thick (per layer), by trowel or gunite machine.It is classified as CC R3 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm of layer thickness.
High-strength, non-shrinking, pourable cast grout for repairs and strengthening. Suitable for concrete jacketing and filling of cavities and cracks in concrete elements, in a thickness of upto 100 mm.It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
2Consumption: Approx. 21,5 kg/m /cm of layer thickness or 2,1 kg for filling volume of 1 lit.
Strengthening & Repairing of ConcreteCEMENT-BASED MATERIALS
47
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
EPOMAX-EK0421/1
96
96
240
6
15
2 kg
4 kg
1 kg
(A+B)
(A+B)
(A+B) (A+B)
(A+B)
(A+B) (A+B) (A+B)Two-component epoxy putty
4.1.2 EPOXY-BASED MATERIALS
EPOMAX-STUCCO0429/1
1 kg(A+B) (A+B)
Two-component,extra fine-grainedepoxy putty
21618
EPOMAX-MT0422/2
Three-component,high-strength, pourable epoxy grout
Three-component, pourable, high-strength, non-shrinking cast grout. Based on a two-component solvent-free epoxy resin and on specially selected quartz sand. It provides high initial and final strength, excellent bonding with steel and concrete and high resistance to impact and vibration. It is used for anchor bolts, machine bedding, bridge bearings, stanchions etc. It can also be used as a pourable mortar for repairs in damaged concrete elements. Color: Light grey. Consumption: Approx. 1,9 kg for filling volume of 1 lit.
25 kg
(A+B+C)
54 (A+B)
54 (C)
MEGAGROUT-1010329/1
5425 kg
High-strength, non-shrinking pourable cast grout for precision grouting of machinery
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High-strength, non-shrinking pourable cast grout. Suitable for machinery founding and tenancy, anchoring, precision grouting of base plates of precision machinery installations. Applied at a maximum thickness of 100 mm.It is classified as CC R4 mortar for concrete repairs, accordingto EN 1504-3. Color: Grey.
2Consumption: Approx. 21,5 kg/m /cm of layer thickness or 2,1 kg for filling volume of 1 lit.
Repa
iring
Mat
eria
ls
Two-component epoxy putty, extra fine-grained. Ideal forputtying any type of surfaces. It is also used for bondingconcrete, steel, stone, wood etc., as well as for restoringdamages in concrete and cement mortars. For limitedapplications, it is possible to mix smaller quantities of the components A and B, by keeping the 1:1 ratio by volume.Color: Grey.
Consumption:2Approx. 1,35 kg/m /mm of layer thickness.
Two-component epoxy putty. Used for bonding concrete and steel, repairing concrete, filling joints and sealing cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND.Color: Grey.
Consumption:2Approx. 1,85 kg/m /mm of layer thickness.
Strengthening & Repairing of ConcreteCEMENT-BASED MATERIALS
Strengthening Repairing of Concrete & EPOXY-BASED MATERIALS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
48
1308/6
100/ps.NOZZLES FOR EPOXYINJECTION RESINS
DUREBOND0416/1
72
180
6
15
4 kg
1 kg
(A+B) (A+B) (A+B)
(A+B) (A+B) (A+B)
Two-componentepoxy injection resin for cracks > 3 mm wide -Bonding agent
Two-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as an injection resin mortar for repairing concrete cracks wider than 3,0 mm as well as for fixing and anchoring of reinforcing rods in concrete elements etc. It can be perfectly applied even on damp substrates.Color: Grey. Consumption:
2As a bonding agent: approx. 0,6 kg/m . Approx. 1,5 kg for filling volume of 1 lit.
EPOMAX-L100418/1
72
180
6
15
3 kg
1 kg
(A+B) (A+B) (A+B)
(A+B) (A+B) (A+B)
Two-componentepoxy injection resin forcracks 0,5-3,0 mm wide
EPOMAX-L200424/1
180151 kg(A+B) (A+B) (A+B)
Two-componentepoxy injection resin forcracks 0,1-1,0 mm wide
EPOMAX-CMT0422/2
Three-component thixotropic epoxy mortar for surface sealing
Three-component, solvent-free thixotropic mortar for surface sealing, based on cement and epoxy resins. It is used for repairing, leveling and smoothing cement-based walls or floors that will be covered with epoxy coatings, polyurethane coatings etc. Also suitable as a final layer for increasing surface resistance to mechanical loads.It is classified as PCC R4 mortar for concrete repairs, according to EN 1504-3. Color: Grey.
2Consumption: Approx. 2 kg/m /mm of layer thickness.
(A+B+C)
54 (A+B)
54 (C)
25 kg
Repairing Materials
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0,1-1,0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on damp substrates.Color: Transparent yellow.
Consumption:Approx. 1,1 kg for filling volume of 1 lit.
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0,5-3,0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on dampsubstrates.Color: Transparent yellow.
Consumption:Approx. 1,1 kg for filling volume of 1 lit.
For the injection of EPOMAX-L10, EPOMAX-L20 and DUREBOND epoxy resins into structural elements.
4.1.3 FIBER REINFORCED POLYMERS (F.R.P.)
MEGAWRAP-2001500/1 2060 cm x 50 m
2(30 m )
RollFabric made of continuous unidirectional carbon fibers. Used for the structural strengthening of construction elements.
Carbon fabric for structural strengthening
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
EPOMAX-LD1501/1
5 kg 72(A+B)
Two-component, epoxy impregnation adhesive for composite fabrics
49
Strengthening Repairing of Concrete & EPOXY-BASED MATERIALS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
0430/6
Plastic sleeve that is used in combination with EPOMAX-ANCHOR for anchoring reinforcing rods into hollow-blocks.
Type: KSH 15 x 130
Type: KSH 12 x 50
Type: KSH 15 x 85
10 ps./box
10 ps./box
10 ps./box
PLASTIC SLEEVE FOR HOLLOW-BLOCKS
EPOMAX-ANCHOR0430/6
Fast-curing anchoring adhesive for reinforcing rods
Two-component, polyester-based anchoring adhesive. It does not contain solvents and styrene. Suitable as an anchoring adhesive for reinforcing bars, reinforcing rods, threaded rods etc.Color: Dark grey.
Consumption: Depending on the application.
12 1.152300 mlCartr.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Two-component epoxy resin without solvents. Suitable for theimpregnation and bonding of synthetic fiber fabrics such as glass fiber or carbon fiber fabrics etc. Used for the structuralstrengthening or repairing of construction elements like concrete, masonry, wood etc.Color: Grey.
Consumption:20,7-1,2 kg/m , depending on the application.
Repa
iring
Mat
eria
ls
4.2 Construction & Repairing of Masonry Wall
ISOMAT MT-80 S0576/1
5425 kgPre-mixed, cement-based mortar for masonry. Due to its special formula, it prevents the formation of salts on masonries which are exposed to weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as M5 mortar for masonry, according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.Pre-mixed, cement-
based mortar for exposed masonry
0576/1
ISOMAT MT-80
Pre-mixed, cement-based mortar for masonry
Pre-mixed, cement-based mortar for masonry. It is used only with the addition of water. It simplifies and accelerates the application. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc.It is classified as M5 mortar for masonry, according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.
5425 kg9015 kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
50
MEGAPLATE1503/1 5 cm x 100 m
5 cm x 50 m
10 cm x 100 m10 cm x 50 m
Roll
Roll
Carbon plates for structural strengthening
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
Strengthening Repairing of Concrete& FIBER REINFORCED POLYMERS (F.R.P.)
EPOMAX-PL1502/1
5 kg 72(A+B)
Two-component, epoxy adhesive paste for composite plates
High-strength carbon fiber plate used for structural strengthening of construction elements. Industrial product manufactured from epoxy resins and unidirectional carbon fibers.
Plate thickness: 1,2 mm.
Repairing Materials
Two-component epoxy adhesive paste. Suitable for bonding carbon plates used in the structural strengthening ofconstruction elements.Color: Grey.
Consumption:21,6-1,7 kg/m /mm of layer thickness.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
STUCCOCRET0326/6
54108
20 kg10 kg
4 kg 4 160
Spatula putty
Construction & Repairing of Masonry Wall
4.3 Putties
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
51
220 kg20 kg
1 kg5 kg
DOMOLIT0103/1
UNICRET-FAST0325/1
124
425 kg5 kg
Fast-setting, white repairing mortar
UNICRET0309/1
239
32472
54160
54
5425 kg
25 kg
Grey
White
Mortar for plastering and masonry
Spatula putty for smoothing and preparing wall surfaces that will be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. It replaces oil stuccos and other similar materials.It is classified as GP CS II, W0 mortar, according to EN 998-1.Color: White.
Consumption:2Approx. 1,1 kg/m /mm of layer thickness.
Fast-setting white mortar, ideal for quick plaster repairs in old and new constructions. It replaces the use of gypsum in relevant applications.It is classified as GP CS I, W0 mortar, according to EN 998-1.Color: White.
Consumption:2Approx. 14,7 kg/m /cm of layer thickness.
Mortar suitable for plastering and masonry works.It is classified as GP CS II, W0 mortar, according to EN 998-1.Color: Grey, white.
Consumption:2Approx. 15,5 kg/m /cm of layer thickness.
Repa
iring
Mat
eria
ls
Mortar plasticizer - Lime replacement
Mortar plasticizer and set retarder that replaces lime.It is certified with the CE marking as air-entraining/plasticizing admixture for masonry mortar according to EN 934-3:T2. Color: Dark brown.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement.For plastering mortars: 75 g per 25 kg of cement.
52
FLEX-COVER0222/6
1102,6 kg(A+B)
Two-component, flexible putty, for sealing joints and cracks
PLANFIX-FINE0308/1
4
54
160
25 kg
5 kg25 kg 54
Grey
White
Polymer-modified cement putty, extra fine-grained
5425 kgPLANFIX-FINEPROFESSIONAL0308/1
Polymer-modified cementputty, extra fine-grained
Polymer-modified cement putty, extra fine-grained. Easily applicable, suitable for repairing and puttying exposed concrete, fixing pores or cavities etc. Due to its low weight, it can be applied or sanded easily and has little consumption. It can be applied using a gunite machine. It is classified as PCC R1 mortar for concrete repairs, according to EN 1504-3. Color: White.
2Consumption: Approx. 1,2 kg/m /mm of layer thickness.
Two-component, flexible putty that consists of a cement-based powder (component A) and a resin emulsion (component B). Suitable for sealing and waterproofing joints and cracks, on walls or floors. It can also be used on window recesses, wall to floor junctions, as well as for puttying surfaces with hair cracks. It can be applied on plaster, cement, gypsum boards, wood etc. Ideal for outdoor applications.Color: White.Consumption: Joint 5 mm x 5 mm: 40 g/m of joint length.
2Puttying: 1,6 kg/m /mm of layer thickness.
PLANFIX0308/1 25 kg
25 kg
5 kg 454
54
160
Grey
White
Polymer-modified cement putty
Polymer-modified cement putty for repairing and puttying exposed concrete, fixing of pores or cavities etc. It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: Grey, white.
Consumption:2Approx. 1,3 kg/m /mm of layer thickness.
Polymer-modified cement putty, extra fine-grained, for repairing and puttying exposed concrete. It can also be applied using a gunite machine.It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: Grey, white.
Consumption:2Approx. 1,3 kg/m /mm of layer thickness.
Repairing Materials
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0326/6
Polymer-modified spatula putty
Polymer-modified, cement-based putty. It is extra fine-grained and suitable for smoothing and preparing interior wall surfaces that will be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. It replaces oil stuccos and other similar materials. Due to its low weight, it is easy to use and covers up to 18% extra surface compared to conventional putties. It is classified as GP CS II, W0 mortar, according to EN 998-1. Color: White.
2Consumption: Approx. 0,9 kg/m /mm of layer thickness.
5420 kgSTUCCOCRET-PLUS
Putties
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
53
0339/1
Joint compound for cement boards
JOINT-FILLER 20 kg
GB-COVER0219/6 7 kg
Pasty acrylic gypsum-board putty
20 kg
FAST-COVER0220/6
5 lit1 lit
0,5 lit
54
3360
90320576
Ready-to use, lightweight acrylic putty
Ready-to-use acrylic putty. Suitable for indoor and outdoor use. It is very convenient in application and rubbing. It provides a flat and smooth final surface, ready for priming and painting. Ideal for stuccoing surfaces made of plaster, concrete, masonry, wood, gypsum board and cement board. Color: White.
Consumption: 21,5-2,5 kg/m , depending on layer thickness.
ISOMAT ACRYL STUCCO0219/6
Pasty acrylic putty
400 g
800 g
816
18
36
Putties
Repa
iring
Mat
eria
ls
Ready-to-use, lightweight acrylic putty for filling and patching cracks and holes of any kind, in a single step. It is applied on plaster, gypsum board, wood etc. at a maximum thickness of 5 cm. It does not crack and does not need rubbing. It can be painted after 30 minutes. For indoor and outdoor application.Color: White.
Ready-to-use acrylic spatula putty. Suitable for stuccoing (skim coat puttying) and pointing gypsum boards. It provides a flat and smooth final surface, ready for priming and painting.Color: White.
Consumption:22,0-3,0 kg/m , depending on layer thickness.
Polymer-modified, fiber-reinforced, cement-based joint compound for cement boards. It features great flexibility, high mechanical strength and superb adhesion to the substrate. It can be applied and rubbed easily. It provides a smooth final surface that can be covered with paint, tiles, etc.Color: Grey.
Consumption:100-150 g per joint meter.
54
0228/1
NANOPRO-C4
12
3972
324
412
3972
324
0207/1
PS-21
418
22120288
0207/1
PS-20
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0228/1
NANOPRO-M4
12
3972
324
0228/1
NANOPRO-L4
1272
324
39
20 lit5 lit1 lit
20 lit5 lit1 lit
20 lit3 lit1 lit
20 lit5 lit1 lit
20 lit5 lit1 lit
Repairing Materials
4.4 Protective Materials & Varnishes
Water-based emulsion with high penetrating ability, based on nano-molecular structure. It protects porous surfaces from moisture and salt stains. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2.Color: White (transparent after drying).
2Consumption: 100-200 ml/m , depending on the absorptivity of the substrate.
Nano-impregnation for protectingporous surfaces
Siloxane-based solution for waterproofing
Ready-to-use, siloxane-based, transparent solution with solvents for waterproofing. It ensures extremely high water-repellence and long-term protection. It can be applied on various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection from rain. Also suitable for waterproofing tile joints. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: Transparent.
2Consumption: 0,2-0,4 lit/m .
Siloxane-based solution without solvents for waterproofing
Ready-to-use, siloxane-based solution without solvents for waterproofing. It ensures extremely high water-repellence and long-term protection. It is suitable for waterproofing tile joints and the protection from rain of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly damp substrates. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: White (transparent after drying).
2Consumption: 0,2-0,4 lit/m .
Water-based emulsion with high penetrating ability, based on nano-molecular structure. It protects porous and slightly porous surfaces (marbles, granites etc) from oil stains, moisture and salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2. Color: White (transparent after drying).
2Consumption: 50-100 ml/m , depending on the absorptivity of the substrate.
Nano-impregnation for protecting surfaces from oils
Water-based emulsion with high penetrating ability based on nano-molecular structure. It protects unporous surfaces from moisture and salt stains. Suitable for polished marbles, granites, tiles, porcelain etc. For indoor and outdoor applications. It is certified with the CE marking as a hydrophobic impregnation, according to EN 1504-2.Color: White (transparent after drying).
Consumption: 250-70 ml/m , depending on the absorptivity of the substrate.
Nano-impregnation for protecting marbles
55
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
VS-10216/6
124
Acrylic stone varnish
Ready-to-use, transparent acrylic varnish, used to impregnate and brighten up natural stone (slate or sinter stone etc.) and artificial building materials (decorative bricks, roof tiles etc). VS-1 brings out the natural color of the material on which it is applied, protecting at the same time the surfaces from the influence of rainwater, weather conditions and atmospheric pollution. It is applied on walls and floors, in indoor or outdoor areas.
2Consumption: 150-200 ml/m per layer, depending on the absorptivity of the surface.
28872
42
124
324
3972
VS-W is a ready-to-use, transparent, acrylic, water-based varnish of nano-molecular structure. It is used on cement-based substrates, natural stones, wooden surfaces etc. VS-W enhances the natural color of the material on which it is applied, protecting at the same time the surfaces from rainwater and atmospheric pollution. Ideal for the protection of substrates decorated with cement screed finish. Suitable for walls and floors, indoor or outdoor.
2Consumption: 150-200 ml/m per layer, depending on the absorptivity of the surface.
VS-W0216/6
Acrylic water-basedvarnish
4 lit1 lit
10 lit
20 lit5 lit1 lit
ISOMAT AG 770221/6
Anti-graffiti emulsion
320963 lit
1 lit 8
Protective Materials & Varnishes
Repa
iring
Mat
eria
ls
Brushable, paraffin-based emulsion. It protects surfaces from several kinds of stains, such as graffiti spray or paint, environmental impurities etc. It makes the surface easy to clean, without affecting its appearance. It provides great durability in time and weather conditions. It can be applied on painted or non-painted surfaces of concrete, plaster, stone, metal etc.
Consumption:250-100 ml/m , depending on the absorptivity of the surface.
VARNISH-PU 2K
0227/6 NEW180
725 kg1 kg 12
4
Transparent,two-component,polyurethane varnish
Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
2Consumption: 0,1-0,2 kg/m for 2-3 layers, depending on the porosity of the substrate.
124
180725 kg
1 kgNEW
Transparent,two-component,polyurethane varnish
Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform matte surface.It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
2Consumption: 0,1-0,2 kg/m for 2-3 layers, depending on the porosity of the substrate.
Gloss
VARNISH-PU 2K
0227/6Mat
56
4.5 Cleaning AgentsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
SM-121401/1
4 72Thinner for epoxy products and cleaner of tools used in epoxysystem applications. Used in combination with ISOMAT AG 77to clean surfaces from graffiti.
Special solvent for epoxy systems
5 lit
CL-CLEAN1402/1 4
12
3972
324
Tile and natural stone cleaner. It removes lime residues, plaster, cement etc.
Tile & natural stone cleaner
20 kg5 kg1 kg
FD-CLEAN1403/1
Oil/grease remover from concrete floors
18 kg4 kg
CL-MOLD1402/1
Antifungal cleaning fluid
Special cleaning fluid with antifungal activity. It cleans and disinfects surfaces from mold, bacteria and algae. It may however act as a precaution preventing the occurrence of microorganisms in high humidity spaces. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for fungal decontamination and maintaining sanitary conditions in places such as kitchens, restaurants, hotels, factories or food warehouses , commercial ovens, etc.Color: Blue.
1 lit
SM-161407/1
Special solvent for polyurethane coatings
Solvent used to dilute polyurethane as well as epoxy coatings. Ideal for thinning the brushable polyurethane waterproofing membranes ISOFLEX-PU 500, when applied by spraying. Also used to clean tools involved in the application of ISOFLEX-PU 500 or tools covered with epoxy residues. As regards the polyurethane coatings, SM-16 is added up to 10% by weight.
4
12
4
12
5 lit
1 lit
3972
324
72
324
Repairing Materials
It removes oil and grease residues from concrete floors by means of emulsification.
Cleaning AgentsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
57
CL-GROUT1402/1
Special cleaner for tile grouts
Liquid cleaner for tile grouts. It is used to clean tile grouts from salts, mould, stains of coffee, wine etc.
Consumption: 21 lit/15-20 m .
*20 lit5 lit
0,75 lit
CL-UNIVERSAL1402/1
General use liquid cleaner. It is used to remove coffee, wine, oils, grease and other similar stains from tiles, marbles, granites, formicas etc.
Consumption: 21 lit/15-20 m .
General use cleaner
*20 lit5 lit
0,75 lit
412
412
3972
324
3972
324
CL-INDUSTRY1402/1 39
4 72
12 324
Liquid cleaner for industrial areas.It is used to clean oils, grease and other intense stains from tiles, concrete, walls, epoxy floorings, metal surfaces etc. Due to its effective formula, it is ideal for cleaning stains in industrial areas.
Consumption:21 lit/15-20 m .
Special cleaner for industrial floorings
CL-EPOXY FLOOR1402/1 39
4 7212 324
Liquid cleaner for epoxy floorings. It is used to clean oils, grease and other intense stains from epoxy floorings.
Consumption: 21 lit/15-20 m .
Special cleaner for epoxy floorings
CL-MARBLE1402/1
394 72
12 324
Liquid cleaner for marbles and granites.It is used to clean stains of coffee, wine, oils, nicotine, ash and others from marbles and granites. It does not contain any acid and does not affect sensitive surfaces. It is applied undiluted on the stained surface and is left to act until the stain disappears. It usually takes 24 hours until the stain is completely removed. For difficult stains repeat the same process.
Consumption: 21 lit/15-20 m .
Special cleaner for marbles and granites
*1000 lit*20 lit
5 lit
0,75 lit
*20 lit*1000 lit
5 lit0,75 lit
*20 lit5 lit
0,75 lit
* Packages marked with an asterisk are available by order.
Repa
iring
Mat
eria
ls
58
4.6 Elastic Joint SealantsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMASTIC-A0601/6 25 1.500
1.500
280 mlWhiteElastoplastic sealant without solvents based on acrylic
polymers. Suitable for sealing work joints, thin expansion joints or plaster cracks in interior or exterior areas. Also suitable for slightly wet surfaces. Easily paintable.Color: White, grey.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
Elastoplastic acrylic sealant
Repairing Materials
DOMOSIL-S0622/6
Mildew-resistant silicone sealant
280 mlTransparent
280 mlWhite
High-performance, mildew-resistant silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminium, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high-moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, laboratories etc. It prevents fungal development that creates stains and black spots. It is not recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white.Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
25
25
1.875
1.875
DOMOSIL-MICRO0622/6
High-performance, anti-mould silicone sealant with built-in ®Microban antibacterial protection technology. It remains color-
stable even after 10 years. Appropriate for sealing joints of 3-40 mm wide in non-porous materials, such as glass, aluminium, porcelain and non-porous ceramics. It is applied in high-humidity areas, such as kitchens, bathrooms, etc. It is not recommended for use in aquariums and cannot be overpainted.Color: Transparent, white.Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Anti-mould silicone sealant with built-in
®Microban technology
280 mlTransparent
280 mlWhite
12
12
1.560
1.560
DOMOSIL-POOL0622/6
Silicone sealant for permanent water immersion
Silicone sealant resistant to permanent water immersion, such as swimming pools, aquariums etc. Appropriate for sealing vertical or horizontal joints 3-40 mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass structures etc. It cannot be overpainted. Color: Transparent.Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
280 mlTransparent
25 1.875
High-performance, general-purpose silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminium, porcelain (e.g. tiles), ceramic etc.It cannot be overpainted.Color: Transparent, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
DOMOSIL0623/6
General-purpose silicone sealant
280 mlTransparent
25
25280 mlWhite
1.875
1.875
59
Elastic Joint SealantsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Repa
iring
Mat
eria
ls
FLEX PU-200627/6
310 ml600 ml
600 ml
Grey
White
One-component, solvent-free polyurethane sealing mastic. Ideal for sealing joints where high elasticity is required. Suitable for joints in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Polyurethane joint sealant
1220
20
1.5601.000
1.000
0626/6
Polyurethane adhesivesealant
FLEX PU-50 S
One-component, polyurethane adhesive mastic sealant with solvents. Ideal for sealing joints where high elasticity is required. Suitable for joints 5-50 mm wide in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
One-component, polyurethane adhesive mastic sealant with solvents. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. Suitable for joints 5-30 mm wide. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
0626/6
FLEX PU-30 S
Polyurethane sealant
25300 ml15600 ml
Grey
25300 ml15600 ml
White
25300 ml15600 ml
Grey
25300 ml15600 ml
White
Two-component joint sealant based on polyurethane resins. Ideal for sealing horizontal and vertical concrete joints on floors and structures like reservoirs, canals etc.Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces.Color: Grey.
Consumption: 1,45 kg/lit of joint volume.
0633/6
FLEX PU-2K
Two-component polyurethane joint sealant
5 kg(A+B)
108
(A+B)
FLEX PU-400626/6
Polyurethane adhesivesealant
12310 ml
12310 ml
20
20
600 ml
600 ml
Grey
White
12
7501.560
7501.560
7501.560
7501.560
1.000
1.000
1.560
1.560
1.0001.560310 ml
20600 mlBrown
One-component, solvent-free polyurethane adhesive mastic sealant. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white, brown.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
60
Elastic Joint SealantsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAT PU FOAM0632/6
12750 mlOne-component, self-expanding polyurethane foam. It has excellent adhesion to wood, cement, stone, metal etc. It is used for fixing door and window frames, filling holes, sealing voids on roofs and insulating materials etc.
One-component, moisture-curing polyurethane foam
ISOMAT PU FOAMPROFESSIONAL0632/6
12750 mlOne-component, moisture curing, low-expansion polyurethane foam. It offers excellent adhesion to most materials (wood, plaster, concrete, stone, metal, etc.), heat and noise insulation, resistance to moisture and ageing. It is used for fixing door and window frames, filling holes, gaps, cracks in insulating materials and pipes penetrating walls etc.
One-component, low-expansion polyurethane foam
1.020
1.020
Repairing Materials
ELASTOTAN0607/6 15600 ml
25280 ml
White15600 ml25
750
750
1.875
1.875280 ml
Grey
Elastomeric adhesive mastic sealant
Elastomeric adhesive mastic sealant with exceptional adhesion to all building materials e.g. glass, aluminium, wood, PVC etc. It features high mechanical strength and resistance to ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
TIXOPHALTE0624/6 24310 ml
Black
Elastoplastic, adhesive bituminous mastic sealant
1.440Ready-to-use, cold-applied elastoplastic adhesive bituminous mastic sealant. It offers superior permanent flexibility and excellent adhesion to all kinds of materials under various conditions, even under water.Color: Black.
Consumption:Approx.1,4 kg/lit of joint volume.
0629/6
FLEX MS-45
Elastomeric adhesive sealant
280 ml
280 ml
Grey
White
25
25
25280 mlRedbrown
1.500
1.500
1.500
Elastomeric adhesive mastic sealant with excellent bonding to any kind of building material, such as glass, aluminium, wood, PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Color: Grey, white, redbrown.
Consumption: Indicative consumption: 1 cartridge /10 linear meters.
61
4.7 Bituminous Repairing MaterialsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAC1018/6
20 kg 365 kg 120
Cold asphalt mix for instant road repairs
25 kg 36
Repa
iring
Mat
eria
ls
Ready-to-use, cold asphalt mixture for patching small potholeson asphalt or concrete pavements. It enables high flexibility, without showing cracks due to contraction-expansion. It has superb adhesion to the substrate and features high resistance to weather conditions and ageing. Color: Black.
Consumption:2 Approx. 21 kg/m /cm of layer thickness.
Bituminous mastic
Bituminous mastic with excellent adhesion and elasticity. It can be cold-applied with a smooth trowel. Suitable for sealing joints on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points while fixing bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing waterproofing layers formed by bituminous membranes.Color: Black.
Consumption: 1,2-1,3 kg/lit.
ASPHALTOS1010/6
62
Repairing Materials
PAINTS &PLASTERS• Interior Paints & Primers
• Exterior Paints & Primers
• Enamel Paints & Primers
• Epoxy Paints & Primers
• Acrylic Plasters
• Silicone Plasters
• Silicate Plasters
5
• Plastering Reinforcement Materials
• Cement-based Plasters
• Plaster Primers
eu
5.1 Interior Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High-quality emulsion paint for interior use. It is characterized by excellent surface coverage and workability, as well as superb resistance to frequent washing and ageing. It provides strong adhesion to any kind of old or new substrate like plaster, concrete, gypsum boards etc. It offers an excellent matte finish and is ammonia free.Color: White. 305 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. High-quality emulsionpaint for interior use
0212/6
ISOMAT CLASSIC White10 lit
0,75 lit3 lit
10 lit
1 lit3 lit
Colors
ISOMAT COLOR0231/6
Emulsion paint for interior use
9 lit15 lit
3 lit
15 lit9 lit3 lit
Colors
Emulsion paint for interior use. It is characterized by very good workability and surface coverage, as well as resistance to frequent washing and ageing. It provides strong adhesion to any kind of old or new substrate. It offers an excellent matte finish and is ammonia free.Color: White. 305 selected colors* (minimum order quantity 9 lit).
2Coverage: Approx. 12 m per liter.
High-quality ecological emulsion paint forinterior use
0233/6
ISOMAT CLASSIC ECO White10 lit
0,75 lit3 lit
10 lit
1 lit3 lit
Colors
0213/6
Emulsion paint for interior use
Emulsion paint for interior use. It is recommended for use in areas, where frequent painting is required, such as public buildings, hotels, hospitals, schools, entertainment venues etc. It is characterized by great workability and surface coverage, as well as high resistance to washing and ageing. It dries quickly and can be promptly recoated. Color: White. 305 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter.
White
White
10 lit
10 lit
3 lit
3 lit
0,75 lit
0,75 lit
Colors
ISOMAT PROFESSIONALCLASSIC
15 lit
ISOMAT COLORECONOMY0232/6
Emulsion paint for interior use
Emulsion paint for interior use. It is recommended for use on new surfaces or surfaces already coated where washing and soiling resistance are not required. It is characterized by great workability. It dries quickly and can be promptly recoated. Color: White. 257 selected colors* (minimum order quantity 9 lit).
2Coverage: Approx. 12 m per liter.
9 lit
3 lit
124
124
124
124
4
4
4
4
12
12
4
4
9 lit3 lit
Colors15 lit
360
360
44110
44110
4424
110
2444
110
360
360
44110
44110
44110
44110
360
360
2444
110
44
110
24
* 305 NCS Pallet
High-quality ecological emulsion paint for interior use. It is characterized by excellent surface coverage and workability, as well as superb resistance to frequent washing and ageing. It provides strong adhesion to any kind of old or new substrate like plaster, concrete, gypsum boards etc. It offers an excellent matte finish and is ammonia free.Color: White. 305 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter.
NEW
White
5. Paints & Plasters
64
Interior Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
CL-MOLD1402/1
1 lit
FLEX-PRIMER0212/6
Acrylic, micronized, water-based primer
PRIMER CLASSIC Acrylic, micronized, water-based primer. It offers excellent bonding. Suitable for use on new surfaces, such as plasters, concrete, bricks etc., that are going to be coated with emulsion paints. Thinning: Up to 50% with clean water. For highly-absorptive substrates, use it undiluted. Color: Blue.
Coverage: 210-15 m per liter, per layer.
20 lit
10 lit5 lit1 lit
FLEX-PRIMER0213/6
Acrylic, water-based primer- Stain Blocker
BLOCK PRIMER Acrylic water-based primer. It offers excellent bonding and high penetration. It blocks water-soluble stains on the substrate, so that they do not appear on the final color. Suitable for use on surfaces that will be coated with emulsion paints and substrates polluted with smoke, nicotine, exhaust fumes etc. It may be diluted up to 10% with clean water. In cases of intense dirt, it is preferable to use it undiluted.Color: White.
2Coverage: Approx. 11-12 m per liter, per layer.
3 lit0,75 lit
0229/6
High quality antimold emulsion paint
High-quality antimold emulsion paint for indoor use. It drastically prevents mold and bacteria and is ideal for areas with high moisture and vapor concentration , such as kitchens, bathrooms, basements, ceilings etc. It has strong adhesion to various substrates such as plaster, concrete, bricks, plaster wood etc. Ammonia free. It provides a uniform matte surface.Color: White. 256 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter.
White10 lit
0,75 lit3 lit
12
412
412
124
124
324
72
3960
324
110360
44
360110
44
360110
10 lit
1 lit3 lit
Colors
ISOMAT
ΒΑΤΗ & KITCHEN
NEW
65
Pai
nts
& P
last
ers
* 305 NCS Pallet
Antifungal cleaning fluid
Special cleaning fluid with antifungal activity. It cleans and disinfects surfaces from mold, bacteria and algae. It may however act as a precaution preventing the occurrence of microorganisms in high humidity spaces. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for fungal decontamination and maintaining sanitary conditions in places such as kitchens, restaurants, hotels, factories or food warehouses , commercial ovens, etc.Color: Blue.
5.2 Exterior Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
FLEXCOAT0202/6
High-quality, elasticwaterproofing paint
Elastic, waterproofing paint. It offers total water impermeability protecting walls from rain. It has high elasticity and crack-bridging ability on surfaces that show hair cracks. Suitable for painting and waterproofing walls, protecting bituminous layers etc. For exterior and interior use. Color: White. 266 selected colors* (minimum order quantity 10 lit).
2Coverage: 8-12 m per liter.
ISOMAT SILICONE0230/6
High-quality, new-generation silicone paint for outdoor use. Characterized by high water and vapor permeability and excellent surface coverage. It shows strong adhesion to all types of new or old substrate, such as plaster, concrete, wood etc. It is ideal for areas with high humidity and extreme weather conditions. It provides a uniform matte surface.Color: White. 180 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. High-quality silicone paint
ISOMAT COLOR ACRYL0242/6
Acrylic emulsion paint for exterior use
Acrylic emulsion paint for exterior use. It is recommended for new or old surfaces that require frequent painting, such as public buildings, hotels, hospitals, schools etc. It is characterized by good workability and surface coverage, as well as resistance to ageing. It dries quickly and can be promptly recoated.Color: White. 305 selected colors* (minimum order quantity 9 lit).
2Coverage: Approx. 12 m per liter.
10 lit3 lit
White
Colors
10 lit3 lit
Colors10 lit3 lit
White
White
10 lit3 lit
15 lit9 lit3 lit
9 lit15 lit
3 lit
Colors
* 305 NCS Pallet
0208/6
Acrylic emulsion paint for exterior use. It is recommended for new or old surfaces that require frequent painting, such as public buildings, hotels, hospitals, schools as well as surfaces that are tarnished by graffiti. It is characterized by great workability and surface coverage, as well as high resistance to ageing. It dries quickly and can be promptly recoated. Color: White. 305 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. Acrylic emulsion paint for exterior use
White
Ηigh-quality, acrylic emulsion paint for exterior use. It is characterized by high water-repellency, excellent surface coverage and durability in harsh weather conditions and ageing. It is also vapor permeable allowing the building to breathe. It provides strong adhesion to any kind of old or new substrate like plaster, concrete, wood etc. It has excellent workability and dries quickly. It offersan excellent matte finish. It is certified as cool paint. Color: White. 305 selected colors* (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. Ηigh-quality, acrylic emulsionpaint for exterior use
ISOMAT ACRYL0205/6
White10 lit
3 lit0,75 lit
Colors10 lit
1 lit3 lit
10 lit3 lit
10 lit3 lit
ISOMAT PROFESSIONALACRYL
4
4
4
4
4
4
4
4
412
124
12
12
44110
44110
44110
44110
4424
110
2444
110
44110
44110
360
44110
44110360
360
360
0,75 lit
0,75 lit
Colors
Paints & Plasters
66
Exterior Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
SM-181407/6 4
12
Solvent forPRIMER ACRYL-S
0208/6
Acrylic, solvent-based primer
Acrylic, solvent-based primer. It offers excellent bonding and high penetration. Penetrates and anchors to the substrate and stabilizes weak substrates. It is recommended for use on new or old porous surfaces that are going to be covered with paint or plaster. It dries and is recoated rapidly. Thinning: Up to 100% with SM-18. For highly-absorptive substrates use it undiluted. Color: Transparent.
2Coverage: 10-15 m per liter, per layer.
124
PRIMER ACRYL-S
Silicone acrylic micronized water-based primer. It offers excellent bonding, high penetration, as well as durability to alkaline surfaces. It protects from rising moisture and salt stains and stabilizes weak substrates. It is recommended for use on new or old external porous surfaces that are going to be covered with paints or plasters. Thinning: Up to 50% with clean water. For highly-absorptive substrates, use it undiluted. Color: Light yellow.
2Coverage: 10-15 m per liter, per layer.
0205/6
Silicone, acrylic, micronized water-based primer
PRIMER ACRYL
FLEX-PRIMER0224/6
412
412
3972
324
7224
288
72
3960
324
4472
39
324
20 lit5 lit
0,75 lit
15 lit5 lit1 lit
20 lit10 lit5 lit1 lit
20 kg10 kg5 kg1 kg
67
High-quality, acrylic,water-based primer
Highly-penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for waterproofing walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL. Color: White.
2Coverage: 5-10 m /kg. The 10 kg package is available in round, plastic containers, useful for preparing colored primers. A colored primer is necessary when the substrate will be covered with acrylic plasters of base D & TR.
Special solvent used as a thinner of the primer PRIMER ACRYL-S.Also suitable for cleaning the tools after use.
Pai
nts
& P
last
ers
FLEX-PRIMER0240/6
Acrylic water-basedprimer for woodensurfaces
Acrylic water-based primer for wooden surfaces. Suitable for indoor and outdoor use. It provides excellent adhesion to the substrate and great coverage. Used on new or old wooden surfaces and is the ideal substrate for water-based enamel paint ISOLAC AQUA. It is odorless and environmentally and user friendly.Color: White.
Coverage: 2Approx. 12 m per liter.
2,50 lit0,75 lit
140360
ISOLAC AQUA-PRIMER
5.3 Enamel Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0241/6
FLEX-PRIMER
Premium qualitywater enamel paint.Satin surface
ISOLAC ΑQUA- SATIN140
140
360
360
2,50 lit
2,50 lit
0,75 lit
0,75 lit
White
Colors
FLEX-PRIMER0240/6
Premium qualitywater enamel paint.Glossy surface
ISOLAC ΑQUA-GLOSS
140360
2,50 lit0,75 lit
124
4
4
12
12
412
412
140360
2,50 lit0,75 lit
White
Colors
Excellent quality, new-generation, water-based enamel paint for wooden surfaces. Suitable for indoor and outdoor use. It is characterized by high elasticity, excellent coverage and outstanding resistance to weathering and ageing. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water soluble enamels (enamel or oil paint). It provides a uniform satin surface.Color: White. 305 selected colors* (minimum order quantity 2,5 lit).
2Coverage: Approx. 12 m per liter. Excellent quality, new generation, water-based enamel paint for wooden surfaces. Suitable for indoor and outdoor use. It is characterized by high elasticity, excellent coverage and outstanding resistance to weathering and ageing. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water soluble enamels (enamel or oil paint). It provides a uniform glossy surface.Color: White. 305 selected colors* (minimum order quantity 2,5 lit).
2Coverage: Approx. 12 m per liter.
FLEX-PRIMER0244/6
Premium quality enamelpaint for metal surfaces
ISOLAC DUCO Premium quality enamel paint for metal surfaces. Suitable for both indoor and outdoor use. It may be applied on old or new metal surfaces, such as doors, railings, machinery and tools. It is characterized by high hardness, glossiness and coverage. It dries fast and offers a highly wear-resistant surface.Color: White, black. 305 selected colors* (minimum order quantity 2,5 lit).
Coverage: 2Approx. 15 m per liter.
4
4
12
12
140
140
360
360
2,50 lit
2,50 lit
0,75 lit
0,75 lit
0244/6
Anti-rust primer formetal surfaces
ISOLAC RUST PRIMER Anti-rust primer for metal surfaces. Suitable for both indoor and outdoor use. It offers excellent adhesion and efficiently protects metal surfaces from rust. Used in new or old metal surfaces, such as doors, railings, machinery and tools and constitutes the ideal substrate for the enamel paimt ISOLAC DUCO.Color: Grey, brown.
Coverage: 2Approx. 13 m per liter.
412
140360
2,50 lit0,75 lit
NEW
NEW
68 * 305 NCS Pallet
Colors
Paints & Plasters
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
EPOXYCOAT0405/1
8 kg 39(A+B) (A+B)
5.4 Epoxy Paints & Primers
Two-component epoxy coating
Two-component, solvent-based epoxy coating. It provides high resistance to abrasion, chemical effects and weather conditions.It is certified with the CE marking and classified as a coating for surface protection of concrete, according to EN 1504-2.Color: RAL 9016 (white), RAL 7035 (light grey), RAL 7040(grey), RAL 1015 (beige). Other RAL colors by order (minimumquantity 120 kg).
Consumption:2200-300 g/m /layer.
EPOXYCOAT-AC0413/1
39
726
8 kg
3 kg(A+B) (A+B) (A+B)
(A+B) (A+B)
Two-component anti-corrosive epoxy coating
EPOXYCOAT-VSF0406/1
3910 kg(A+B) (A+B)
Two-component, solvent-free epoxy coating. It offers high hardness and abrasion resistance. It is specially designed for aggressive chemical environments such as petroleum, high acids, alkalis etc. It is certified with the CE marking and classified as a coating for surface protection of concrete, according to EN 1504-2.Color: RAL 7032 (sand grey). Other RAL colors by order (minimum quantity 120 kg).
2Consumption: 200-300 g/m /layer.
Two-component, anti-corrosive, solvent-based epoxy primer for metal surfaces. Used as a final coat or as an anticorrosive primer of EPOXYCOAT-W, EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. It is classified as a product for reinforcement corrosion protection, according to EN 1504-7.Color: RAL 3009 (redbrown), RAL 7040 (grey). Other RAL colors by order (minimum quantity 120 kg).
2Consumption: 150-200 g/m /layer.
Two-component, epoxy coating for aggressive chemical environments
7262 kg(A+B) (A+B) (A+B)
EPOXYCOAT-W0420/1
9 kg
3 kg(A+B)
(A+B)
Two-component, water-based epoxy coating
39(A+B)
EPOXYCOAT-S0406/1
9,6 kg 39
6 2 kg
(A+B)
(A+B)
(A+B)
72(A+B)
72(A+B)
(A+B)
Two-component epoxy coating suitable for swimming pools
Two-component, solvent-based, epoxy coating. It provides high resistance to abrasion, chemical effects and weather conditions, as well as enhanced flexibility. Ideal for painting swimming pools. It is certified with the CE marking and classified as a coating for surface protection of concrete, according to EN 1504-2.Color: Blue of the pool, RAL 9003 (white). Other RAL colors by order (minimum quantity 144 kg).
2Consumption: 200-300 g/m /layer.
Two-component, water-based epoxy coating. Especially suitablefor priming wet or fresh (age < 28 days) concrete surfaces. It provides high resistance to abrasion, chemical effects and weather conditions. It is certified with the CE marking and classified as a coating forsurface protection of concrete, according to EN 1504-2.Color: RAL 7035 (light grey), RAL 1015 (beige). Other RAL colors by order (minimum quantity 120 kg).
2Consumption: 200-300 g/m /layer.
69
Pai
nts
& P
last
ers
Epoxy Paints & PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
DUROFLOOR-BI0403/2
10 kg
4 kg
48
105
(A+B)
(A+B)
(A+B)
(A+B)
Two-component,colorless epoxyimpregnation
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. It prevents the formation of dust on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. It is classified as SR-B2,0, according to EN 13813.
Consumption:2150-250 g/m /layer.
72SM-141407/1
45 lit
Special solvent for epoxy coatings
70
MARMOCRYL Fine
Acrylic, ready-to-use, colored, water-repellent plaster.Smooth finish
1 mm0345/6
1,5 mm2,0 mm
0346/6
0347/6
Acrylic, ready-to-use, white or colored, water-repellent finish coat plaster. Suitable for creating a smooth surface. It eliminates the need for facade painting. Due to its high elasticity and excellent bonding to the surface, MARMOCRYL Fine is also an ideal final layer for external thermally-insulated facades.It is certified with the CE marking, according to EN 15824.Color: White and 305 selected colors*.
Recommended thickness: MARMOCRYL Fine 1 mm: 1 mm.MARMOCRYL Fine 1,5 mm: 1,5 mm.MARMOCRYL Fine 2 mm: 2 mm.
2Consumption: Approx. 1,8 kg/m /mm of plaster thickness.
The colors of MARMOCRYL Fine may present slight differences from those of exterior paints because of the plaster's texture.
25 kg 24White
5.5 Acrylic PlastersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
2425 kgColors
* 305 NCS Pallet
Special solvent used for thinning the epoxy coatings EPOXYCOAT, EPOXYCOAT-S and EPOXYCOAT-AC, and cleaning the tools used in applications of the above epoxy materials.
Paints & Plasters
71
Acrylic PlastersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
* 305 NCS Pallet
2 mm3 mm
0349/6
0350/6
Acrylic, ready-to-use, colored, water-repellent plaster.Rough-textured finish
25 kg 24WhiteAcrylic, ready-to-use, white or colored, water-repellent finish
coat plaster. Suitable for creating a rough-textured decorative surface. It eliminates the need for painting. Due to its high elasticity and excellent bonding to the surface MARMOCRYL Decor is also an ideal final layer for external thermally-insulated facades. It is certified with the CE marking, according to EN 15824.Color: White and 305 selected colors*.
Recommended thickness: MARMOCRYL Decor 2 mm: 2 mm.MARMOCRYL Decor 3 mm: 3 mm.
2Consumption: Approx. 1,6 kg/m /mm of plaster thickness.
The colors of MARMOCRYL Decor may present slight differences from those of exterior paints because of the plaster's texture.
MARMOCRYL Decor
2425 kgColors
0372/6
25 kg 24Acrylic, pasty coating with a granite-like finish. It is used as a finish coat to create a colored , water-repellent, coarse-textured finish. It can be applied on all kinds of building materials such as plaster, concrete, cement boards, gypsum boards etc. Ideal as a final coating for the external thermal insulation composite systems in facades. It is certified with the CE marking, according to EN 15824 as V2, W2 render.
Color: 24 selected colors (MARMOCRYL GRANIT pallet).
Consumption: 2Approx. 1,8 kg/m /mm of plaster thickness.
Recommended application thickness: Approx. 2 mm.
Acrylic, pasty coating with a granite-like finish
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
G 710,G 760,G 820,G 870G 930G 950G 660
G 160, G 980G 490
G 510, G 600G 130,G 150,G 220
G 550G 440, G 500
G 530G 300MARMOCRYL GRANIT
G 380G 330G 270G 110
Pai
nts
& P
last
ers
72
2 mm3 mm
0364/6
0365/6
MARMOCRYL
SILICONE Decor
Ready-to-use, water repellent, colored silicone plaster.Rough-textured finish
Ready-to-use, white or colored, silicone plaster. MARMOCRYL SILICONE Decor is characterized by extreme hydrophobia and excellent vapor permeability. It is suitable for creating a rough-textured surface. It eliminates the need for facade painting. Due to its high elasticity and excellent bonding to the surface,it is also an ideal final layer for external thermally-insulated facades. It is certified with the CE marking, according to EN 15824.Color: White and 227 selected colors*.
Recommended thickness: MARMOCRYL SILICONE Decor 2 mm: 2 mm.MARMOCRYL SILICONE Decor 3 mm: 3 mm.
Consumption: 2Approx. 1,6 kg/m /mm of plaster thickness.
The colors of MARMOCRYL SILICONE Decor may present slight differences from those of exterior paints because of the plaster's texture.
5.6 Silicone Plasters
MARMOCRYLSILICONE Fine
1 mm0360/6
1,5 mm2,0 mm
0361/6
0362/6
Ready-to-use, water repellent, colored silicone plaster.Smooth finish
Ready-to-use, white or colored, silicone plaster. MARMOCRYL SILICONE Fine is characterized by extreme hydrophobia and excellent vapor permeability. It is suitable for creating a smooth surface. It eliminates the need for facade painting. Due to its high elasticity and excellent bonding to the surface, it is also an ideal final layer for external thermally-insulated facades.It is certified with the CE marking, according to EN 15824.Color: White and 227 selected colors*.
Recommended thickness: MARMOCRYL SILICONE Fine 1 mm: 1 mm.MARMOCRYL SILICONE Fine 1,5 mm: 1,5 mm.MARMOCRYL SILICONE Fine 2 mm: 2 mm.
2Consumption: Approx. 1,8 kg/m /mm of plaster thickness.
The colors of MARMOCRYL SILICONE Fine may present slight differences from those of exterior paints because of the plaster's texture.
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
25 kg 24White
25 kg 24White
* 305 NCS Pallet
2425 kgColors
2425 kgColors
Paints & Plasters
73
5.7 Silicate Plasters
MARMOCRYLSILICATE Fine
1 mm0395/6
1,5 mm2,0 mm
0396/6
0397/6
Ready-to-use, pasty, white or colored silicate plaster with special silicone additives. It provides water repellency and excellent vapor permeability. It is suitable for creating a smooth surface. Due to its high elasticity and excellent bonding to the substrate, it is also an ideal final layer for external thermally-insulated facades. It is certified with the CE marking, according to EN 15824.Color: White and 227 selected colors*.
Recommended thickness:MARMOCRYL SILICATE Fine 1 mm: 1 mm.MARMOCRYL SILICATE Fine 1,5 mm: 1,5 mm.MARMOCRYL SILICATE Fine 2 mm: 2 mm.
2Consumption: Approx. 1,8 kg/m /mm of plaster thickness.The colors of MARMOCRYL SILICATE Fine may present slight differences from those of exterior paints because of the plaster's texture.
Ready-to-use, pasty, white or colored silicate plaster.Smooth finish
Ready-to-use, pasty, white or colored silicate plaster.Rough-textured finish
MARMOCRYLSILICATE Decor
2 mm3 mm
0398/6
0399/6
Ready-to-use, pasty, white or colored silicate plaster with special silicone additives. It provides water repellency and excellent vapor permeability. It is suitable for creating a rough textured surface. Due to its high elasticity and excellent bonding to the substrate it is also an ideal final layer for external thermally-insulated facades. It is certified with the CE marking, according to EN 15824.Color: White and 227 selected colors*.
Recommended thickness:MARMOCRYL SILICATE Decor 2 mm: 2 mm.MARMOCRYL SILICATE Decor 3 mm: 3 mm.
2Consumption: Approx. 1,6 kg/m /mm of plaster thickness.The colors of MARMOCRYL SILICATE Decor may present slight differences from those of exterior paints because of the plaster's texture.
25 kg 24White
25 kg 24White
PRODUCT/CODE DESCRIPTION PACKAG. PS/BOX PS/E.-PAL
2425 kgColors
2425 kgColors
MARMOCRET-BOND0340/1
5425 kg
5.8 Cement-based Plasters
Mortar for bondingspatterdash of plaster
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Pre-mixed, cement-based plaster used for creating the bondingspatterdash of plaster. Suitable for concrete, masonry, thermal insulation boards etc., in order to enhance the adhesion of the base coat of plaster that follows. It only needs the addition of water. Ideal for application with plastering machine. It is classified as GP CS IV, W1 mortar, according to EN 998-1.Color: Grey.
2Consumption: Approx. 5 kg/m .
* 305 NCS Pallet
Pai
nts
& P
last
ers
74
Cement-based PlastersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
MARMOCRET-BASE0341/1
5425 kg
Pre-mixed plasterfor the base coat
MARMOCRET Fine0311/1
5425 kg
MARMOCRET Decor0312/1
25 kg 54
Pre-mixed, colored, water-repellent plaster for a smooth final surface
Pre-mixed, colored, water-repellent plaster for arough-textured final surface
MARMOCRET 10306/1
48
4830 kg
30 kg
Grey
White
One coat plaster
Pre-mixed, one coat plaster. It is applied at a maximum thickness of 3 cm per layer. Its usage requires the application of a bonding spatterdash (rough cast).It is mixed only with water. The plaster is applied with a plastering machine or by hand, using a float or a trowel. It is classified as OC CS II, W1 mortar, according to EN 998-1.Color: Grey, white.
Consumption: 2Approx. 15,0 kg/m /cm of plaster thickness.
Decorative, water-repellent finish coat plaster ideal, for the preparation of smooth surfaces. It only needs water. It is classified as GP CS II, W1 mortar, according to EN 998-1.Color: White. Other colors by order (minimum quantity 6.000 kg).
Consumption:2Approx. 1,4 kg/m /mm of plaster thickness.
Recommended thickness: 2-5 mm.
Pre-mixed, cement-based plaster, used to create the base coat(brown coat) of plaster. It is the ideal substrate for the colored, water-repellent finish coat plasters when applied with plastering machine. It only needs the addition of water.It is classified as GP CS II, W0 mortar, according to EN 998-1.Color: Grey.
Consumption:2Approx. 13,5 kg/m /cm of plaster thickness.
Decorative, water-repellent finish coat plaster for the preparation of rough-textured surfaces. It only needs water. It is classified as GP CS II, W1 mortar, according to EN 998-1.Color: White. Other colors by order (minimum quantity 6.000 kg).
Consumption:2Approx. 1,5 kg/m /mm of plaster thickness.
Recommended thickness: 2,5-3,5 mm.
MARMOCRET Fine PLUS0336/1 54
54
54
25 kg
25 kg
25 kg
White
MARMOCRETPallet
colorsOther
Polymer-modified, colored, water-repellent plaster, for a smooth final surface
Decorative, polymer-modified, water-repellent finish coat plaster, white or colored for a smooth final surface. It is applied on substrates with special demands in elasticity and adhesion. It only needs water. It is used as a complete system in combination with fiber-reinforced adhesives for insulation boards. It is classified as GP CS II, W2 mortar, according to EN 998-1. Color: White and 7 selected colors (MARMOCRET pallet). Other colors by order (minimum quantity 6.000 kg).
2Consumption: Approx. 1,4 kg/m /mm of plaster thickness. R ecommended thickness: 2-3 mm.
Paints & Plasters
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
MARMOCRET Decor
PLUS 0337/1 54
54
54
25 kg
25 kg
25 kg
Pallet
colorsOther
White
Polymer-modified, colored, water-repellent plaster, for a rough-textured final surface
MARMOCRET-S0304/1
6015 kg
Mortar-binder for the preparation of white water-repellent plasters
0341/1
MARMOCRETGRAFFIATO
5425 kgPolymer-modified, water-repellent, cement-based finish coat plaster. It consists of aggregate with a special particle size granulation, to form an extra coarse-textured decorative surface. It is applied on substrates with special demands in elasticity and adhesion. It is used as a complete system in combination with fiber-reinforced adhesives for insulation boards.It is classified as GP CS III, W1 mortar, according to EN 998-1. Color: White.
2Consumption: Approx. 1,5 kg/m /mm of plaster thickness. Recommended thickness: 3-4 mm.
Polymer-modified, water-repellent plaster, for a rough-textured final surface
MARMOCRET
MARMOCRET-SP0304/1
5425 kgRestoration plaster, particularly durable to salts and moisture. Suitable for the restoration of renders in buildings located near the sea or in areas exposed to rising damp. Also appropriate for areas with high humidity such as bathrooms, basements etc. For indoor and outdoor applications.It is classified as R CS IΙ mortar, according to EN 998-1.Color: White.
Consumption:2Approximately 10 kg/m /cm of plaster thickness.
Restoration plaster for renovation
Decorative, polymer-modified, water-repellent finish coat plaster, white or colored for a rough-textured final surface. It is applied on substrates with special demands in elasticity and adhesion. It only needs water. It is used as a complete system in combination with fiber-reinforced adhesives for insulation boards.It is classified as GP CS II, W2 mortar, according to EN 998-1.Color: White and 7 selected colors (MARMOCRET pallet). Other colors by order (minimum quantity 6.000 kg).
2Consumption: Approx. 1,4 kg/m /mm of plaster thickness. R ecommended thickness: 2,5-3,5 mm.
Mortar-binder for preparation of white, water-repellent plasters. It is mixed with marble sand and water.Color: White.
Consumption:21 bag/10 m /5 mm of plaster thickness.
ISOMAT ST-10224/1
Special impregnation for the restoration of salt damaged masonry. It transforms water soluble salts such as chlorides and sulfates into insoluble compounds. It is used in combination with the restoration plaster MARMOCRET-SP.
Consumption:20,4-0,5 kg/m .
Impregnation of salt damaged masonry
20 kg5 kg1 kg
4
12
3972
324
75
Cement-based Plasters
Pai
nts
& P
last
ers
UNICRET0309/1 25 kg
25 kg
Grey
White
Mortar for plastering and masonry
UNICRET-FAST0325/1 4
25 kg5 kg
Fast-setting, white repairing mortar
0576/1
ISOMAT MT-80
Pre-mixed, cement-based mortar for masonry
Pre-mixed, cement-based mortar for masonry. It is used only with the addition of water. It simplifies and accelerates the applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc.It is classified as M5 mortar for masonry, according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.
25 kg15 kg
ISOMAT MT-80 S0576/1
54
54
54160
5490
5425 kgPre-mixed, cement-based mortar for masonry. Due to its special formula, it prevents the formation of salts on masonries which are exposed to weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as M5 mortar for masonry, according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.Pre-mixed, cement-based
mortar for exposed masonry
Mortar suitable for plastering and masonry works.It is classified as GP CS II, W0 mortar, according to EN 998-1.Color: Grey, white.
Consumption:2Approx. 15,5 kg/m /cm of plaster thickness.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
76
Fast-setting white mortar, ideal for quick plaster repairs in old and new constructions. It replaces the use of gypsum in relevant applications.It is classified as GP CS I, W0 mortar, according to EN 998-1.Color: White.
Consumption:2Approx. 14,7 kg/m /cm of plaster thickness.
Paints & Plasters
Cement-based Plasters
77
5.9 Plaster PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ML-PRIMER0119/6
Acrylic slurry prime coat
Water-based, white or colored, acrylic slurry prime coat with very fine aggregates. It increases the substrate's roughness, enhancing the adhesion of decorative plasters of all types (cement-based, acrylic, silicone, silicate). Furthermore it ensures a uniform color of the final surface, especially when a dark colored plaster has been selected. Suitable for interior and exterior applications. Color: White and 305 selected colors* (minimum quantity for order 15 kg).
2Consumption: 150-200 g/m .
15 kg5 kg
44110
* 305 NCS Pallet
412
4
412
PL-PRIMER0119/1
Plaster primer - Dehydration barrier
3972
20 kg5 kg
PL-BOND0333/1
Adhesion primer consisting of synthetic resins and quartz sand.Used for priming smooth or non-absorptive surfaces, instead ofspatterdash (rough cast), in order to increase the adhesion of the subsequent plaster. Ideal substrate for gypsum plasters. Suitable for indoor and outdoor use.
Consumption:2300-350 g/m , depending on layer thickness. Plaster adhesion
primer
1102420 kg
5 kg
FLEX-PRIMER0224/6 44
72
39
324
20 kg10 kg5 kg1 kg
UNI-PRIMER0209/1
3972
324
20 kg5 kg1 kg
Plaster primer-dehydration barrier. It is applied diluted with water on surfaces that will be subsequently plastered. It prevents fast absorption of the plaster's water by the substrate. Suitable for aerated concrete surfaces.Color: Red.
Consumption:240-100 g/m .
High-quality, acrylic,water-based primer
Highly-penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for waterproofing walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL. Color: White.
2Coverage: 5-10 m /kg. The 10 kg package is available in round, plastic containers, useful for preparing colored primers. A colored primer is necessary when the substrate will be covered with acrylic plasters of base D & TR.
Acrylic, water-based primer
Ready-to-use acrylic water-based primer. It stabilizes weak, loose or crumbling plasters.Color: White. Consumption:
2100-200 g/m .
Pai
nts
& P
last
ers
5.10 Plastering Reinforcement Materials
1207/1
30
30
30
0,25m x 50m 2(12,5 m )
1m x 50m 2(50 m )
1m x 50m 2(50 m )
1m x 50m 2(50 m )
RollFIBERGLASS MESHFOR PLASTER
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/PAL.PS/BOX
High-strength fiberglass mesh for reinforcing plasters or cement mortars that are subject to cracking.
301m x 50m 2(50 m )
2Branded white color, 145 g/m .Mesh: 5,0 mm x 5,0 mm. Ideal for facade thermal insulation works.
301m x 50m 2(50 m )
2White color, 160 g/m .Mesh: 4,0 mm x 4,0 mm. Ideal for facade thermal insulation works.
2White color, 90 g/m .Mesh: 5,0 mm x 5,0 mm.
2Blue color, 120 g/m .Mesh: 10,0 mm x 10,0 mm.
2Blue color, 90 g/m .Mesh: 10,0 mm x 10,0 mm.
2Blue color, 90 g/m .Mesh: 10,0 mm x 10,0 mm.
1207/1
16
24
100
FIBERGLASS TAPE90 m
20 m
Roll
Roll
Self-sticking fiberglass tape
Self-sticking fiberglass tape for reinforcing gypsum boards, cement sheets etc. Also used for bridging cracks in other repairing works.
Tape width: 5 cm.
78
Plaster PrimersPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
SILICONE-PRIMER0359/6
Adhesion primer for silicone plasters
Silicone polymer aqueous emulsion which stabilizes porous substrates and ensures the proper adhesion of silicone plasters MARMOCRYL SILICONE.Color: White.
2Coverage: 5-10 m /kg. The 10 kg package is available in round, plastic containers useful for preparing colored primers. A colored primers is necessary when the substrates will be covered with silicone plasters of base D & TR.
3944
20 kg10 kg
4 725 kg
Paints & Plasters
eu
FLOORINGS• Cement-based Floorings
• Impregnations & Varnishes for Cement-based Floorings
• Epoxy-Cement based Floorings
• Epoxy & Polyurethane Floorings
6
EXTRA-TOP0327/1 5425 kg
Grey
5425 kg
Ochre
5425 kgRedbrown
5425 kg
Light Blue
6.1 Cement-based Floorings
80
6. Floorings
Surface hardener for cement-based floors
FLOWCRET 1-100307/1
5425 kg
Self-leveling, polymer-modified cementitious screed
FLOWCRET 1-10
EXPRESS0307/1
Fast-setting, self-leveling, polymer-modified cementi-tious screed
EXPRESS
FLOWCRET 3-300307/1
5425 kgFast-setting, self-leveling, polymer-modified compound, used for smoothing and leveling surfaces. It can be applied at a thickness of 3-30 mm. Ideal before installing floor coverings such as tiles, moquettes, plastic or wooden floors, marbles, natural stones etc. Also suitable for floors with underfloor heating.It is classified as CT-C40-F10-AR2, according to EN 13813.Color: Grey.
Consumption: 2Approx. 1,65 kg/m /mm of layer thickness.
Fast-setting, self leveling, polymer-modified cementitious screed, used for smoothing and leveling concrete or mortar floors, before laying finishing materials like ceramic tiles, moquettes, parquet, vinyl tiles etc. It can be used at a thickness of 1-10 mm. Ideal for quick repairs, as it is walkable after 3 hours. Also, it can be covered after 24 hours. It is classified as CT-C30-F7-AR4 (grey) and CT-C30-F7-AR6 (white), according to EN 13813.Color: Grey, white.
2Consumption: Approx. 1,65 kg/m /mm of layer thickness.
Fast-setting, self-leveling compound
EXTRA-TOP CR0327/1
Hardening agent forindustrial floors withcorundum
5425 kgHardening agent for industrial floors with corundum, quartz aggregates and special admixtures. Suitable for floors withhigh demands in mechanical strength such as industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas, etc. It is classified as CT-C80-F10-AR1, according to EN 13813.Color: Grey.
Consumption: 23-5 kg/m .
Self-leveling, polymer-modified cementitious screed, forsmoothing and leveling concrete or mortar floors, before laying finishing materials like moquettes, parquet layers, tiles etc. Applied at a thickness of 1-10 mm per layer.It is classified as CT-C30-F10-AR1, according to EN 13813.Color: Grey.
Consumption:2Approx. 1,65 kg/m /mm of layer thickness.
54
54
25 kgGrey
25 kgWhite
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Surface hardener for cement-based floors with quartz aggregates and special admixtures. Suitable for industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas etc. It is classified as CT-C70-F7-AR2, according to EN 13813.Color: Grey, ochre, redbrown, light blue.
Consumption:23-5 kg/m .
DUROCRET-DECO0310/1
5425 kgWhite
Grey
Light Grey
Light Ochre
Mocha
Crocus
81
Cement-based Floorings
SCREED-1000328/6
5425 kg
Floor leveling cementious screed
SCREED-SX0328/6
5420 kg
Rapid-setting mortar-binder for the preparation of floor screeds
Rapid-setting, reinforced mortar that replaces the cement (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water, a rapid-setting, high-strength cement mortar is prepared. Suitable for filling and leveling floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also suitable for preparing cement mortar grade for terraces and outdoor areas. Color: Grey.
2Consumption: 2,0-3,5 kg/m /cm of layer thickness.
Cementitious screed for filling and leveling floors to be coveredwith tiles, marble, parquet etc., as well as for forming slopes on terraces. It replaces non-reinforced concrete or gas-concrete. Applied at a thickness of up to 10 cm per layer.It is classified as CT-C7-F3-A12, according to ΕΝ 13813.Color: Grey.
Consumption:2Approx. 14,0 kg/m /cm of layer thickness.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
5425 kgWhiteGrey
Light GreyLight OchreMochaCrocus
Floo
rings
Polymer-modified, extra fine-grained cement-based mortar. It provides water repellency and very good adhesion to the substrate. After hardening a smooth final surface is formed. It is used in thin layers (1-3mm) as a cement mortar on cementicious substrates. Suitable for applications such as stairs, floors, walls and also for special constructions such as built sanitary ware (sinks, showers etc.). It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: White, grey, light grey, light ochre, mocha, crocus.
2Consumption: Approx. 1,4 kg/m /mm of layer thickness.
Polymer-modified, fiber-reinforced, cement mortar. It provides excellent adhesion to the substrate, waterproofing and abrasion resistance. For indoor and outdoor use in a variety of applications, on floors and walls, for a special aesthetic result (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.). It is classified as PCC R2 mortar for concrete repairs, according to EN 1504-3. Color: White, grey, light grey, light ochre, mocha, crocus.
2Consumption: Approx. 1,5 kg/m /mm .of layer thickness
Cement mortar for surface finishing on floors and walls
DUROCRET-DECOFINISH0310/1
Extra fine-grained, cement-mortar for surface finishing on floors and walls
NEW
82
Floorings
DUROFLOOR-BI0403/2
4 kg
10 kg
105
48
(A+B)
(A+B)
(A+B)
(A+B)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
6.2 Impregnations & Varnishes for Cement-based Floorings
ISOMAT BI-1000224/1
Concrete hardening and dustproofing impregnation
Water-based polymer emulsion with high penetration ability. When applied on concrete floors or cement screeds, it hardens and dustproofs the surface. Suitable for indoor and outdoor use. Color: White (transparent after drying).
Consumption: 2100-200 g/m , depending on the absorptivity of the substrate.
3972
324
0224/1
One-component,transparent polyurethaneimpregnation
One-component, transparent, polyurethane resin for impregnating and sealing concrete floors or cement. It is also used as a hardener on brittle floors and surfaces, in order to increase their strength and wear resistance. Suitable for areas such as basements, warehouses, parking lots with light traffic etc.
Consumption: 2100-200 g/m , depending on the absorptivity of the substrate.
72
33
20 kg5 kg1 kg
ISOMAT BI-120 PU5 kg
18 kg
412
4
Two-component,colorless epoxyimpregnation
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. It prevents the formation of dust on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. It is classified as SR-B2,0, according to EN 13813.
Consumption:2150-250 g/m /layer.
VARNISH-PU 2K
0227/6 NEW
Transparent,two-component,polyurethane varnish
NEW
Transparent,two-component,polyurethane varnish
Gloss
VARNISH-PU 2K
0227/6Mat
180725 kg
1 kg 124Two-component polyurethane varnish. Characterized by high
abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
2Consumption: 0,1-0,2 kg/m for 2-3 layers, depending on the porosity of the substrate.
124
180725 kg
1 kg
Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform matte surface.It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
2Consumption: 0,1-0,2 kg/m for 2-3 layers, depending on the porosity of the substrate.
83
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
6.3 Epoxy-Cement based Floorings
DUROFLOOR-CMT0422/2
Three-component,self-levelingepoxy-cement flooring
25 kg(A+B+C)
54 (A+B)54 (C)
Three-component, self-leveling, solvent-free epoxy-cement flooring. It is used for repairing and leveling cement-based floors that are going to be covered with DUROFLOOR epoxy systems, polyurethane coatings, plastic floorings, wooden floorings etc. It is also applied in cases where the floor is relatively fresh or subject to rising damp in order to prepare the substrate for the application of epoxy coatings, avoiding detachment problems. It is classified as CT-C50-F10-AR0,5 screed material, according to EN 13813. Color (A+B+C): Grey.
2Consumption: Approx. 2,1 kg/m /mm of layer thickness.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
6.4 Epoxy & Polyurethane Floorings
DUROFLOOR0401/2
399 kg(A+B) (A+B)
Two-component, self-leveling epoxy flooring
Two-component, solvent-free, self-leveling epoxy flooring. After mixing the two components, Q35 quartz sand is added at a ratio of DUROFLOOR : quartz sand = 1:2 by weight. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). Other RAL colors by order (minimum quantity 144 kg).
2Consumption: DUROFLOOR: 0,6 kg/m /mm. 2Quartz sand: 1,2 kg/m /mm (mix. ratio:DUROFLOOR:sand=1:2).
500 kg(2A+1B)
DUROFLOOR-R0404/2
10 kg
275 kg
39(A+B)
(A+B)
(A+B)
Two-component,brushable epoxy coating
DUROFLOOR 110400/2
Two-component epoxy flooring
3916 kg
200 kg
(A+B)
(A+B)
(A+B)
Two-component, solvent-free epoxy flooring. With the addition of quartz sand M32 at ratio of 1:1 by weight, it can be used as a self-leveling epoxy flooring. Also, without adding quartz sand, it can be applied as a brushable epoxy coating. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: RAL 7032 (sand grey), RAL 7040 (grey). Other RAL colors by order (minimum quantity 160 kg).
2Consumption: As a self-leveling epoxy flooring: 0,85 kg/m /mm. 2Consumption of quartz sand: 0,85 kg/m /mm.
2As a brushable epoxy coating: 250-300 g/m /layer.
Two-component, solvent-free brushable epoxy coating, suitable for concrete or cement mortar surfaces. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). Other RAL colors by order (minimum quantity 150 kg).
Consumption:2250-300 g/m /layer.
399 kg(A+B) (A+B)
colorsOther
3910 kg(A+B) (A+B)
colorsOther
3916 kg(A+B) (A+B)
colorsOther
Floo
rings
NEW
TOPCOAT-PU 720 0229/1 5 kg
1 kg
20 kg120320
416
33
84
Epoxy & Polyurethane FlooringsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
DUROFLOOR-C0409/2
39
39
(A+B) (A+B)
(A+B)(A+B)
colorsOther
Two-component, self-leveling, conductive epoxy flooring
10 kg
10 kg
DUROFLOOR-BI0403/2
4 kg
10 kg
105
48
(A+B)
(A+B)
(A+B)
(A+B)
DUROFLOOR-PU0431/2
Two-component,brushable polyurethanecoating
10 kg 39(A+B) (A+B)
Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. It is classified as SR-B2,0-AR2-IR8, according to EN 13813.Color: RAL 7040 (grey). Other RAL colors by order (minimum quantity 150 kg).
Consumption: 2250-300 g/m /layer.
0412/2
Two-component, brushable epoxy coating
DUROFLOOR-RL(A+B)275 kg
10 kg 39(A+B) (A+B)
3910 kg(A+B) (A+B)
colorsOther
3910 kg(A+B) (A+B)
colorsOther
Two-component, solvent-free, colored epoxy system, with a very low content of volatile organic compounds (VOC), according to LEED. It is used as a brushable coating on concrete floors, cement screeds etc., when high mechanical or chemical strength is required. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: RAL 7040 (grey). Other RAL colors by order (minimum quantity 150 kg).
2Consumption: 250-300 g/m /layer.
Two-component,colorless epoxyimpregnation
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. It prevents the formation of dust on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. It is classified as SR-B2,0, according to EN 13813.
Consumption:2150-250 g/m /layer.
Floorings
Two-component, solvent-free, self-leveling, conductive epoxy flooring, used to eliminate static electricity problems.It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: RAL 7040 (grey), RAL 1015 (beige). Other RAL colors by order (minimum quantity 150 kg).
Consumption:2Approx. 1,5 kg/m /mm of layer thickness.
Aliphatic, elasticpolyurethane top coat
One-component, aliphatic, polyurethane top coat. It is used for the protection of ISOFLEX-PU 500 against solar radiation (UV), especially if a dark final color is desired. Also suitable in cases where the polyurethane waterproofing coatings are subject to pedestrian traffic and light vehicle traffic (e.g. parking lots).Color: White, grey. Other colors by order (minimum quantity 500 kg).
Consumption: 0,12-0,25 kg/ , depending on the substrate.2m
85
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0402/2
Two-component, solvent-free epoxy primer
DUROPRIMER-PRO
(A+B) (A+B)10 kg 39
(A+B)220 kgTwo-component, solvent-free epoxy primer. It is used as a
primer on cementicious substrates to be coated with epoxy layers of the DUROFLOOR system. With the addition of quartz sand it can be used as resin-mortar or as a crack-repairing material. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: Whitish.
Consumption:2250-400 g/m .
0402/2
Two-component, solvent-free epoxy primer
Transparent, two-component, solvent-free epoxy primer, with a very low content of volatile organic compounds (VOC), in compliance with the LEED requirements. It is used as a primer for epoxy flooring systems, for the preparation of resin-mortars with the addition of quartz sand and as a sealing coating on cement-based floors (e.g. industrial areas, warehouses, etc.). It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.
2Consumption: 200-300 g/m .
DUROPRIMER-RL(A+B) (A+B)10 kg 39
DUROFLOOR-CV0410/2
39(A+B) (A+B)
Two-component, conductive epoxy varnish. To be used before DUROFLOOR-C.It is classified as SR-B2,0, according to EN 13813.Color: Black.
Consumption:2Approx. 200 g/m .
Two-component,conductive epoxy varnish
8 kg
DUROFLOOR-PSF0419/2
39
48
(A+B)
(A+B)
(A+B)
(A+B) (A+B)6(A)
12(B)
Transparent, two-component, solvent-free epoxy primer. It is used as a primer on surfaces that will be subsequently coated with epoxy flooring systems, as a binder for preparing epoxy mortars with the addition of quartz sand and also for sealing cementitious floors in industrial areas and warehouses.It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: Light yellow.
Consumption: 2200-300 g/m .
Two-component, solvent-free epoxy primer
DUROPRIMER-PSF0402/2
Two-component, solvent-free epoxy primer. It is used as a primer on surfaces that will be subsequently coated with epoxy flooring systems and also as a binder for preparing epoxy mortars with the addition of quartz sand.It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.Color: Light yellow.
Consumption:2200-300 g/m .
Two-component, solvent-free epoxy primer
10 kg
280 kg
5 kg
39(A+B) (A+B)10 kg
(2A+1B)500 kg
Epoxy & Polyurethane Floorings
Floo
rings
86
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
(A+B)
(A+B)
(A+B)
(A+B)
EPOXYPRIMER-W0402/2
Two-component, water-based epoxy primer
10 kg 39
DUROPRIMER0402/2
9 kg
200 kg
3 kg
48
105
(A+B)
(A+B)
(A+B)
(A+B) (A+B)
Two-component, colorless, solvent-based epoxy primer. It is used on substrates that will be coated with epoxy layers of the DUROFLOOR system.It is classified as SR-B2,0, according to EN 13813.
Consumption:2200-300 g/m .
Two-component epoxy primer
EPOXYPRIMER 5000402/2
Two-component, water-based epoxy primer
DUROPRIMER-SG0402/2
10 kg 39(A+B) (A+B)
Two-component, water-based epoxy primer. It is used as a primer of ISOFLEX-PU 500 when applied over non-absorptive substrates or over old waterproofing layers. Also suitable as a primer for cement-based substrates, e.g. concrete or cement-screeds, which will be covered with epoxy layers of DUROFLOOR system.Color: Light yellow.
Consumption: 2150-200 g/m .
DUROPRIMER-W0423/2
21 kg 11(A+B+C) (A+B+C)
Three-component,water-based epoxy primer
NEW
20 kg 39
(A+B) (A+B)1 kg 18015
(A+B) (A+B)4 kg 726
Two-component, water-based epoxy primer. It is used as aprimer for cement-based substrates, e.g. concrete orcement-screeds, that will be covered with epoxy layers ofDUROFLOOR system. It can also be used as a primer ofISOFLEX-PU 500 when applied over non-absorptive substrates or over old waterproofing layers.It is classified as SR-B2,0, according to EN 13813. Color: Light yellow.
2Consumption: 200-300 g/m .
Two-component, solvent-free epoxy primer. It is used as a waterproofing layer on floors that are subject to rising damp and will be covered with epoxy flooring systems or cement screeds. Moreover, it can be used as a primer under the DUROFLOOR epoxy system on substrates that are still damp or oil-contaminated (first, the substrate should be cleaned from oils). It is classified as SR-B2,0, according to EN 13813.Color: Light beige.
2Consumption: 600-1000 g/m .
Two-component epoxy primer for concrete floors
Floorings
Epoxy & Polyurethane Floorings
Three-component, water-based epoxy primer. It is used forpriming wet or fresh (age < 28 days) concrete floors that will be subsequently covered with epoxy layers of the DUROFLOORsystem.It is classified as SR-B2,0, according to EN 13813. Color: Light yellow.
Consumption:2250-300 g/m /layer.
APPENDIX
! Tools & Accessories
! Product Index
87
Tools & Accessories
88
1374/6
For proper grouting, while fixing ceramic tiles.Packaging: 500 pieces/bag.
For proper grouting, while fixing ceramic tiles.Packaging: 500 pieces/bag.
For proper grouting, while fixing glass-blocks.Packaging: 50 pieces/bag.
For fixing ceramic tiles.Packaging: 500 pieces/bag.
1399/6
1374/6
1364/6
1311/6
For the application of DUROFLOOR self-leveling epoxy flooring.
1329/6
Adjustable floor finish scraper for the application of DUROFLOOR self-leveling epoxy flooring.
1398/6
Additive of epoxy layers which increases thixotropy and decreases fluidity on vertical or sloped surfaces.
1318/6
1319/6
Special shoes with spikes used during the application of DUROFLOOR self-leveling epoxy flooring.
CROSS TILE SPACERS
T-SHAPED TILESPACERS
CROSS GLASS-BLOCK SPACERS
WEDGES
TROWELNOTCHED
FLOOR FINISH SCRAPER
THIXOTROPICAGENT
SPIKED ROLLER
SPIKED SHOES
DESCRIPTION - APPLICATIONPRODUCT/CODE PACKAG. WIDTH PS/E.-PAL.
6
bag/box
bag/box
bag/box
bag/box
8080
60
100
40
30
30
24
18145
3 mm
2 mm1 mm
3 mm4 mm5 mm7 mm
10 mm
5 mm7 mm
1,5 kg
12 mm spikes.
Used on the fresh layer of DUROFLOOR self-leveling epoxy flooring immediately after application with the notched trowel, permitting the trapped air to escape and homogenizing the mixture.
Tools & Accessories
89
1301/6
For mastic cartridges 310 ml.
For mastic sausages 600 ml.
SPECIAL GUNFOR CARTRIDGES
1370/6
4061/6
Quartz sand of special granulometry for dusting flooring layers with DUROFLOOR.
Quartz sand of special granulometry for dusting flooring layers with DUROFLOOR 11.
Q35 QUARTZ SAND
M32 QUARTZ SAND
54
53
Bag
Bag
18 kg
25 kg
1324/6
Used during application of DUROFLOOR-C conductive epoxy flooring.
COPPER TAPESELF-ADHESIVE 20 m
Roll
1308/6
Device for the application of epoxy injection resins.
1360/6
For treating the final surface of plasters.
1361/6
For treating MARMOCRET Fine final surface.
1331/6
Hard sponge for smoothing and emulsifying MULTIFILL-EPOXY tile gout.
1332/6
Hard sponge with handle for smoothing and emulsifyingMULTIFILL-EPOXY tile grout.
1333/6
Soft sponge with handle for the final cleaning of MULTIFILL-EPOXY tile grout.
EPOXY INJECTIONRESIN POT
METAL TROWEL
SPONGE TROWEL
HARD SPONGE
HARD SPONGEWITH HANDLE
SOFT SPONGEWITH HANDLE
Dimensions: 165 x 110 x 50 mm.
Dimensions: 15 x 30 cm.
Spare hard sponge.
Spare soft sponge.
Dimensions: 15 x 30 cm.
10
10
4
10
4
DESCRIPTION - APPLICATIONPRODUCT/CODE PACKAG. WIDTH PS/E.-PAL.
Product Index
90
PAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
23
21
12
4
5
23ADIPLAST
22ADINOL-RAPID
23ADIFLEX-B
ADINOL-DM
AQUAMAT
AQUAFIX
AQUAMAT-F
5AQUAMAT-SR
4, 9AQUAMAT-ELASTIC
4, 8AQUAMAT-FLEX
20ADIUM 110
21ADIUM 130
ADIUM 150
22ADINOL-RAPID 2H
ADIUM 132 21
ADIUM 145 21
AQUAMAT-ADMIX 6, 22
5AQUAMAT-PENETRATE
61
20
20
21
BEVETOL-SPL
BEVETOL-VZ
BEVETOL-RD
ASPHALTOS
AQUAMAT-MONOFLEX 4, 8
57
57
57
57
56
57
CL-EPOXY FLOOR
CL-INDUSTRY
CL-MARBLE
CL-CLEAN
CL-UNIVERSAL
CL-GROUT
88CROSS TILE SPACERS
88CROSS GLASS-BLOCK SPACERS
89COPPER TAPE SELF-ADHESIVE
CL-MOLD 56, 65
DOMOSIL-POOL 15, 58
15, 58DOMOSIL
DOMOSIL-MICRO 15, 58
23, 51DOMOLIT
23DOMOLIT-TR
AQUAMAT-MONOELASTIC 4, 8
BLOCK PRIMER 65
EPOXYPRIMER 500 86DOMOSIL-S 15, 58
EPOMAX-L10 48
EPOXYCOAT
EPOMAX-L20
EPOMAX-LD
EPOMAX-PL
EPOMAX-STUCCO
69
48
50
47
49
EPOXYCOAT-S
EPOXYCOAT-AC
69
69
69
EPOXYCOAT-W
86
69
EPOXYCOAT-VSF
EPOXYPRIMER-W
EPOMAX-MT 47
DUROCRET-PENETRATE 45
DUROFLOOR 83
EPOMAX-ANCHOR 49
DUROFLOOR-R
DUROPRIMER
DUROPRIMER-PSF
83
DUROFLOOR-C 84
83DUROFLOOR 11
DUROFLOOR-PSF 85
86
85
5, 86
DUROPRIMER-W
ELASTOTAN
EPOMAX-CMT
EPOMAX-EK
DUROCRET-PLUS 44
86
14, 60
48
47
DUROPRIMER-SG
DUREBOND 48
DUROFLOOR-PU 84
DUROFLOOR-BI 70,82,84
DUROFLOOR-CV 85
DUROCRET 44
DUROCRET-FAST 44
DS-99 24
DUROCRET-DECO 45, 81
DUROFLOOR-CMT 83
DUROCRET-DECO FINISH 45, 81
DUROFLOOR-RL
DUROPRIMER-PRO
DUROPRIMER-RL
84
85
85
ISOFLEX-PU 600 7
EXTRA-TOP CR 80
FERROSEAL
FD-CLEAN
FAST-COVER
44
53
56
FERROSEAL-MCI 44
78FIBERGLASS TAPE
13FIBERGLASS MESH FOR WATERPR.
78FIBERGLASS MESH FOR PLASTER
FLEX-PRIMER 11,67,77
FLEX PU-20 15, 59
FLEX-COVER 52
FLEXCOAT 10, 66
FLEX MS-45 16, 60
FLEX PU-2K 16, 59
FLEX PU-40 16, 59
GB-COVER 53
ISOCURE 24
80FLOWCRET 3-30 EXPRESS
ISOCURE-A 25
FLOWCRET 1-10 80
80FLOWCRET 1-10 EXPRESS
88FLOOR FINISH SCRAPER
89HARD SPONGE WITH HANDLE
89HARD SPONGE
FLEX PU-50 S 16, 59
FLEX PU-30 S 16, 59
EXTRA-TOP 80
89EPOXY INJECTION RESIN POT
FIX-RAPID 5, 45
ISOFLEX-PU 550
7
ISOFLEX 6
ISOFLEX-PU 500
7
ISOLAC AQUA-SATIN 68
ISOGUM 3V
ISOGUM P
9
9
ISOFLEX-T25 6
ISOLAC AQUA-GLOSS 68
ISOLAC AQUA-PRIMER 68
ISODIEN 4 PF ALU 9
ISOLAC-BT 10
Product IndexPAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
91
ISOMASTIC-A 58
ISOMAT AK-T35 38
ISOMAT AK-T55 38
ISOMAT AK-THERMO ACRYL 38
ISOMAT AK-THERMO 38
38ISOMAT AK-T65
ISOMAT BATH & KITCHEN 65
ISOMAT AK-T33 37
ISOMAT ACRYL 66
ISOMAT AG 77 55
ISOMAT AK 11 28
ISOMAT AK 12 28
ISOMAT AK 10 28
ISOMAT AK 9 28
ISOMAT AK-PRIMER
ISOMAT AK-PARQUET
31
40
ISOMAT AK-GLASS 39
ISOMAT AK-GRAND 31
ISOMAT AK-FLUX
ISOMAT AK-ELASTIC
31
39
30
ISOMAT AK-FIRE
ISOMAT AK-EPOXY NORMAL
ISOMAT AK-EPOXY FAST
39
40
ISOMAT AK-BLOCK
ISOMAT AK-ECOLIGHT
39
29
ISOMAT AK-LIGHT 29
ISOMAT AK-MARBLE 31
ISOMAT AK-MEGARAPID 30
ISOMAT AK 50 32
ISOMAT AK 25 29
ISOMAT AK 22 29
ISOMAT AK 20 28
ISOMAT AK 21 29
ISOMAT ACRYL STUCCO 53
ISOMAT AK-RAPID 30
ISOMAT AK-STONE 30
ISOMAT AK-RAPID FLEX 30
ISOLAC DUCO 68
ISOLAC RUST PRIMER 68
ISOMAC 10, 61
ISOMAT BI-100 82 MARMOCRYL SILICONE Decor 72
ISOMAT BI-120 PU 82
50, 76
50, 76
MARMOCRYL Decor 71
MARMOCRYL Fine 70
MARMOCRYL GRANIT 71
MARMOCRYL SILICATE Fine
MARMOCRYL SILICATE Decor
73
73
ISOMAT CLASSIC 64
ISOMAT COLOR
ISOMAT COLOR ACRYL
ISOMAT COLOR ECONOMY
64
66
64
MARMOCRET Decor
MARMOCRET Decor PLUS
MARMOCRET-BOND
74
75
73
MARMOCRET-SP 75
MARMOCRET-S 75
MARMOCRET Fine
MARMOCRET Fine PLUS
74
74
MARMOCRET GRAFFIATO 75
MARMOCRET 1 74
MARMOCRET-BASE 74
89M32 QUARTZ SAND
ISOPAST
ISO-PRIMER
LATEX 24
53
9
JOINT-FILLER
ISOPAST-RUBBER
7
10
ISOMAT BUTYL TAPE ALU 17
ISOMAT MT-80
ISOMAT MT-80 S
ISOMAT ST-1 75
ISOMAT SL 17
ISOMAT PU FOAM
12
60
ISOMAT PROFESSIONAL CLASSIC
ISOMAT PROFESSIONAL ACRYL
64
66
ISOMAT MT 200 39
ISOMAT SILICONE 66
ISOMAT PU FOAM PROFESSIONAL 60
ISOMAT GLITTER 37
14ISOMAT BUTYL TAPE
ISOMAT CLASSIC ECO 64
MARMOCRYL SILICONE Fine 72
PL-PRIMER
PL-BOND
PLASTIPROOF
77
77
6, 20
49PLASTIC SLEEVE
MONTAGE-W 40
MULTIFILL-EPOXY FLOW
MULTIFILL-EPOXY GLITTER
37
37
MULTIFILL-ELASTIC 36
MULTIFILL-EPOXY THIXO
MULTIFILL RAPID 1-8
36
34
MULTIFLEX
NANOPRO-C
NANOPRO-L
32
11, 54
12, 54
MULTIFILL SMALTO 1-8
MULTIFILL-STONE
34
36
NANO-SEAL 11
PLANFIX 52
NANOPRO-M 12, 54
MULTIFILL 32
PLANFIX-FINE 52
48NOZZLES
MULTIFILL MARBLE 0-3 36
PLANFIX-FINE PROFESSIONAL 52
MONTAGE-S 40
MEGAWRAP-200 49
MEGAPLATE 50
MEGAGROUT-101
MEGAGROUT-100
47
46
MEGACRET-40 46
MEGACRET-10 46
89METAL TROWEL
MEGACRET-40 FAST 46
MEGACRET-40 MCI 46
ML-PRIMER 77
PRIMER ACRYL 67
PRIMER CLASSIC
PRIMER ACRYL-S 67
65
PRIMER-PU 100 7
25POLYPROPYLENE FIBERS
13POLYESTER CLOTH
Product IndexPAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
Note:In case of ordering products with special colors that are not listed in the price list, explicit agreement about price anddelivery time is required.
92
89SOFT SPONGE WITH HANDLE
14, 60
88TROWEL NOTCHED
89SPECIAL GUN FOR CARTRIDGES
TIXOPHALTE
STUCCOCRET-PLUS
SUPERBOND-PU
52
40
88THIXOTROPIC AGENT
STUCCOCRET 51
SPLIT-2000 24
88SPIKED SHOES
88SPIKED ROLLER
89SPONGE TROWEL
TOPCOAT-PU 720 8, 84
88T-SHAPED TILE SPACERS
VS-1
VS-W
55
55
WATERPROOFING & UNCOUPLING MEMBRANE 14, 41
88WEDGES
WATERSTOP 1520 17
13WATERPROOFING MATERIALS
51, 76UNICRET-FAST
51, 76UNICRET
31, 77UNI-PRIMER
UNCOUPLING MEMBRANE 41
VARNISH-PU 2K Mat 55, 82
VARNISH-PU 2K Gloss 55, 82
REOTOL-SPL 20
RAPICRET 45
RETADOL 22
ROOF-TOP 17
89Q35 QUARTZ SAND
SM-18 67
SM-16 8, 56
SM-14 70
SM-12 56
SCREED-100 81
SILICONE-PRIMER 78
SCREED-SX 81
PS-21 11, 54
PS-20 11, 54
Notes
Notes
Notes
ISOMAT. Building quality
ISOMAT is the potent, liable company that sets new standards in building. The products of ISOMAT are innovative and offer smart solutions in new constructions, in renovation and in restoration of damages.
They are developed in the Research and Development Department with devotion to quality and emphasis in detail. When reaching the market they should be perfect in every aspect. They should provide radical solutions, be user-friendly, economic and reliable through time. Our satisfied customers from the world of construction, industry and commerce are our best reference.
Nevertheless, ISOMAT moves further on. With a highly qualifiedstaff of engineers, we provide reliable technical support to everyone concerned. The consultant of ISOMAT is always close to you in order to advice you on any building issue. Because ISOMATis interested in your success and in the quality of your construction.