Janatics pneumatics AIR valve solenoid dealer vardhman bearings

WWW.VARDHMANBERARINGS.COM

WWW.ARIHANTENGINEERS.COM

We at vardhman bearings are authorize dealer of JANATICS PNEUMATICS ..products , janatics air cylinders , janatics pneumatic cylinders ,

janatics directional control valves , janatics compact valves D S 2, janatics manually operated valves D S 2 , janatics panel mounting valves ,

janatics manual & mechanical valves , janatics solenoid valves J series , janatics solenoid valves DP1 series , janatics solenoid connectors ,

janatics 3/2 direct acting NC values -17 mm , janatics 3/2 direct acting NC valves – 22 mm , janatics airline valves , janatics air preparation

units , janatics pneumatics accessories , janatics pneumatics systems , janatics air preparation units NPT , janatics di rectional control valves

unit NPT ,

Janatics > Janatics Pneumatics Automation

Janatics Pneumatics has been established and manufacturing since more than three decades and have their manufacturing plant based in Coimbatore – India.

Janatics Pneumatics is an engineering focussed pneumatic automation company that have been providing Janatics Pneumatics qual ity pneumatic products and

expertise to the Indian market for over thirty years. Janatics Pneumatics is one of the major Manufacturers of Components for Pne umatics and Factory

Automation.

Beginning with air preparation units ( Frl ), moving on to air management devices such as Pneumatic manual and solenoid operated valves direct acting valves

and finally through to Pneumatic actuators, Pneumatic-Cylinders and handling equipment, Janatics Pneumatics cylinder, valve, & frl dealers & distributors can

always offer the right products.

Spares for Janatics Pneumatics products such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair kit & service kit, solenoid coils &

connectors, auto drain, diaphragms, silencers, flow control & quick exhaust valves, hose pipes, pu tubings & push-in one touch fittings are available with the

dealers, distributors & stockists for immediate sales,repair & service for Standard & Large Bore Cylinders for Iso 6431 A12, A13 series, Iso 15552 A27, A28, A25,

A26 series, Vdma 24562 A23, A24, A63, A64 magnetic & nonmagnetic type series, Compact Cylinders A02, A03 series, Solenoid -Valves & Coils for J, Dp1, Ds2

series & Modular Air Preparation Units (Frls) for ¼”, ½”, ¾” & 1” Bsp sizes and other models also.

Janatics Pneumatics has poppet valve, solenoid valve, cylinder & frl dealers & distributors network spread over Lower Parel, Dadar, Mahim, Andheri, Goregaon,

Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Daman, Boisar, Dahanu Road & outside Mumbai – India.

Also Janatics Pneumatics valve, cylinder & frl dealers & distributors are very prominent all over Maharashtra as in Pune, Kol hapur, Nashik and other locations in

India like Gujarat, Surat, Ahmedabad, Bangalore, Vizag, Indore, Nashik, Nagpur, Ludhiana, Chandigarh, Ernakulum, Hydrebad, Vadodara, Rajkot, Delhi, Chennai,

& Kolkata.

http://www.vardhmanberarings.com/

http://www.arihantengineers.com/

http://www.vardhmanbearings.com

Janatics Pneumatics – Janatics Range of Pneumatic Products Include:-

Janatics Pneumatic Compressed Air Preparation >

Janatics Air Filter, Pressure Regulator & Oil Lubricator, Frl combinations & individual units for compressed modular air preparation ( Frl ). Available in ¼, 3/8, ½, ¾,

1” Bsp pipe connections and more.

Janatics Pneumatic Drives >

Standard Single & Double Acting Cylinders in Compact | Round | Min iature | Short Stroke & Rodless types conforming to Iso 6432, 15552, 21287 Vdma 24562

available in A12, A13 A27, A28, A25, A26 A23, A24 A63, A64, A02, A03 series in magnetic & nonmagnetic types.

Janatics Pu Tubings >

Pipes, Low & High Pressure Hoses, Janatics Pu (Polyurethane), Nylon, Polyamide Od, Id, Spiral Tube.

Janatics Pneumatic Fittings >

Push-in One Touch fittings in Elbow, Tee, Straight, Y types for m5, 1/8, ¼, 3/8, ½, ¾, & 1 Inch Bsp sizes / Barbed Fittings / Thre aded Fittings also Blanking, Bulk

Head Connectors & Plugs.

Janatics Pneumatic Valves - Pneumatics >

Standard pneumatic and universal directional valves > Solenoid & mechanically actuated valves in Ds2 & J series in 3/2, 5/2, 5/3 No / Nc types | Poppet Valves in

Dp1 series in 3/2 & 5/2 types | Solenoid Connectors in Ka, Kb,& Kc series in 32, 22 & 17 mm sizes | Direct Acting Valve in 3/2 & 2/2 Normally closed and open

types – 17mm & 22mm in Ac / Dc Voltages| shut-off valves | pressure-limiting valves and proportional valves.

Janatics Pneumatic Manual Valves >

Flow Control Valves in Gr & Gr2 series | Quick Exhaust Valve in Gq series | Inline Slide Valve in Gs1 series | Non Return Val ve in Gv1 series | Roller Lever Valves

| Hand Lever Valve in Ds2 series in different pipe connections.

Janatics Pneumatics Solenoid Coils & Accessories >

Janatics Solenoid Explosion Coils & Connectors in Ac & Dc Voltages | Janatics Solenoid Armature Set for poppet & solenoid val ve.

Janatics Pneumatics Silencers, Guages & Air Guns >

Janatics Silencers | Janatics Air Guns & Blower Nozzels | Janatics Pressure Guages for modular air preparation units(frl).

Janatics > Janatics Pneumatics > Dealer & Distributor Mumbai - India

Vardhman bearings is one of the largest dealer & distributor located in Andheri – Mumbai - India having a wide range of Janatics Pneumatics products. We give

free technical advice related to Janatics pneumatic products and provide immediate repair & service within Mumbai – India on Janatics Pneumatics products such

as poppet valves, Solenoid-Valves, direct acting valve, flow control quick exhaust valve,cylinders and modular air preparation units (frl) for all models. We are

market leaders in Janatics Pneumatics factory automation and pneumatic systems providing immediate sales & repair services in Lower Parel, Dadar, Mahim,

Andheri, Goregaon, Malad, Kandivili, Borivali, Dahisar, Mira Road, Bhayander, Vasai, Virar, Mulund, Thane, Palghar, Vapi, Dam an, Boisar, Dahanu Road &

outside Mumbai – India.

Vardhman bearings has also got a good prescence in the International Market and support OEMs and After Sales Dealers Distributors and Export their goods to

countries like Afghanistan Albania Algeria Antarctica Argentina Australia Austria Bahamas Bangladesh Barbados Belgium Bermuda Bhutan Bolivia Botswana

Brazil Brunei Bulgeria Cambodia Camaroon Canada Chile China Congo Colombia Costa Rica Cuba Cyprus Czech Republic Denmark Dominic an Republic

Ecuador Egypt El Salvador Equatorial Guinea Ethiopia Fiji Islands Finland France Georgia Germany Greece Greenland Guine a Hungary Indonesia Iran Iraq

Ireland Israel Italy Jamaica Japan Jordan Kazaksthan Kenya Korea Kuwait Lebanon Liberia Luxembourg Libya Malaysia Maldives Ma uritius Mongolia Montserrat

Morocco Mozambique Myanmar Namibia Nepal Netherlands New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal

Qatar Romania Russia Saudi Arabia Singapore Slovania Somalia South Africa South Georgia Spain Sri Lanka Sudan Sweden Switzerl and Syria Taiwan Tajikistan

Tanzania Thailand Tonga Turkey Uganda Ukraine United Arab Emirates United Kingdom United States Uruguay Uzbekistan Venezuela Vietnam Virgin Islands

Yemen Yugoslavia Zambia Zimbabwe by Air And Sea Transport on FOB or CIF Trade Terms.

Vardhman bearings is always here to help you with all your pneumatic requirements and repair & services ranging from Janatics Pneumatics factory automation

products and systems to component supply of Janatics Pneumatics Modular Air Filters, Regulators, Lubricators (Frl), Air Cylin ders, Compact Cylinders, Poppet

Valves, Flow Control Vavle, Solenoid-Valves, Pneumatic Pu One Touch Fittings & Tubings for most applications.

Also spares such as seal kits, piston seals, o-rings, filter element, filter plastic bowl, repair & sevice kit, auto drain, solenoid coils,diaphragms, silencers,

connectors, hose pipes, pu one touch tubings & fittings are available in stock for immediate repairing & servicing of Janatic s pneumatics Iso 6431 Vdma 24562

standard and custom made Air Cylinders, Poppet Valves, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves & Modular Air Preparation Units (Frls) and

other models.

Some of the popular products namely the Modular Air Filter Regulator Lubricator ( Frl ) series, Standard & Custom made Cylind ers Compact Cylinders in Iso 6431

Vdma 24562 Series, Flow Control Valves, Quick Exhaust Valves, Solenoid-Valves, Solenoid Coils & Connectors in Ac / Dc Voltages are available in bulk stock.

We offer the best competitive prices and discounts on bulk purchase of Janatics Pneumatics pneumatic produc ts and fastest delivery options in and around

Mumbai - India for all your Janatics Pneumatics pneumatic requirements.

Vardhman bearings also has an extensive range of other products like Electrical Temperature & Pressure Differential Switch and Ss Glycerin e Filled Pressure

Guages and of International Brands like Allen Bradley Siemens Omron Switzer Danfoss Indfoss Baumer Waree Orion Trafag Wika Fi ebig etc. All the products are

of international export quality and standards having international approvals and certifications from registered vendors which are mainly used in Process Industries

like Petrochemicals Oil And Gas Fertilizers Cement and Steel Pharmaceuticals Beverages Food Dairy Pet And Water Treatment OEM & Maintenance Industries.

We also deal in Magnetic Piston Filter Clogging Colour Band Indicators High Low Pressure Piston And Diaphragm Differential Dp Pressure Gauges Magne tic Float

Switches Flow Switches Flame Proof Flp Switches etc.

About product range

Since 1977, Janatics has been consistently focusing on development of new products and has more than 17000 models in its range.

Flagship products l ike Air preparation units, Fittings and Valves has made Janatics to be the number one Indian pneumatic pro duct manufacturer and had

enabled to sprawl globally

Exports to over 25 countries which includes UK, USA, Mexico, Germany, Australia, Kuwait, South Africa, Italy, Saudi Arabia, K enya, Egypt etc., would

vouchsafe the product quality








Product Gallery

Air Cylinders

View More..

Directional Control Valves

View More..

Air Line Valves

View More..

Air Preparation Units

View More..

Accessories

View More..

Pneumatic Systems

View More..

ISO 6431 (Tie rod)

As per ISO 6431 / CETOP RP43P, RP53P standards Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm

Standard Cylinder - Series A12, A13

Double End Cylinder - Series A10, A11

ISO 15552 Tie rod (Ø32-100)

AS per ISO 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm

ISO Standard Cylinder - Series A27, A28


ISO 15552 Tie rod (Ø125-200)

As per 15552 / VDMA 24562 standards (Barrel type) Cylinder sizes: Ø125, 160 & 200 mm



VDMA 24562 (Square profile)

As per ISO 15552 / VDMA 24562 standards Cylinder sizes: Ø32, 40, 50, 63, 80, 100 & 125 mm

Air Cylinder (Square Type Profile) - Series A23, A24


ISO 21287 (Ø25-100)

Compact ISO cylinders As per ISO 21287 standards

Cylinder sizes: Ø25, 32, 40, 50, 63, 80 & 100 mm



Compact Cylinders

Compact Cylinder - Series A02 Compact Magnetic Cylinder - Series A03

Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm

ISO 6432 / CETOP RP52P

ISO Miniature Cylinders - Series A51, A52 Cylinder sizes: Ø12, 16, 20 & 25mm

ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)

Air Cylinder Accessories

Air Cylinder Accessories Magnetic Sensors

Reed switches

Connector cables

Standard Cylinder A12, A13 As per ISO 6431 / CETOP RP43P, RP53P standards

Adjustable cushioning at both ends Wide varieties of mountings

Long life

Magnetic and non magnetic versions

Double End Cylinder A10, A11 Double Acting - Ø32-100 mm

Adjustable cushioning at both ends Wide variety of mountings

Magnetic & Non Magnetic versions

Long life

Vardhman bearings are dealers of janatics pneumatics products , janatics dealers , janatics stockiest , janatics pneumatics suppliers ,

janatics pneumatics manufacturers , janatics valves seal kit dealers , janatics pneumatics price list , janatics products dealers , janatics

products manufacturers , janatics pneumatics in india , janatics pneumatics in Mumbai , janatics pneumatics in pune , janatics pneumatics

in Maharashtra , janatics pneumatics in delhi , janatics pneumatics in Nagpur , janatics pneumatics in kolkatta , janatics pneumatics in

banaglore , janatics pneumatics in Chennai , janatics pneumatics in hyderbad , janati cs pneumatics in Coimbatore , janatics pneumatics

in tamilnadu , janatics pneumatics in Punjab ,

Janatics Pneumatic Products

We are one of the leading organizations engaged in trading and distributing of wide range of Pneumatic products. We are engaged in distributing pneumatics

products manufactured by “Janatics Pneumatic:

Pneumatic Cylinder

SO 6431 (Tie rod)

As per ISO 6431 / CETOP RP43P, RP53P standards

Cylinder sizes: Ø32, 40, 50, 63, 80 & 100 mm

Standard Cylinder - Series A12, A13


ISO 15552 Tie rod (Ø125-200)

As per 15552 / VDMA 24562 standards (Barrel type)

Cylinder sizes: Ø126, 160 & 200 mm



VDMA 24562 (Square profile)

As per ISO 15552 / VDMA 24562 standards


Air Cylinder (Square Type Profile) - Series A23, A24


ISO 21287 (Ø25-100)

Compact ISO cylinders

As per ISO 21287 standards




Compact Cylinders

Compact Cylinder - Series A02

Compact Magnetic Cylinder - Series A03

Cylinder Sizes: Ø12, 16, 20, 25, 32, 40, 50, 63, 80 & 100mm

ISO 6432 / CETOP RP52P

ISO Miniature Cylinders - Series A51, A52

Cylinder sizes: Ø12, 16, 20 & 25mm

ISO Miniature Cylinder with Cushioning - Series A55, A56 (Ø25mm only)

Vardhman bearings deal in janatics pneumatic products , janatics dealers , janatics stockiest ,

janatics valves , janatics hoses , janatics products ,

Pneumatic Directional Control Valves

Leveraging upon rich vendor base, we are trading and distributing pneumatic control valves. These are known fo r features

like long service life, low maintenance and corrosion resistance. Apart from this we traded different types of valves:

Solenoid Compact Valve DS2

Sizes: 1/8, 1/4 & 1/2

3/2, 5/2, 5/3 type available

Available for different standard coil voltages

Manifold mounting is possible

Solenoid Valves DP1 series

Size G1/4 - 3/2, 5/2

Diaphragm operated poppet seat

No lubrication required

Maintenance free

Wide range of coil voltages

Continuous duty cycle

Good flow characteristics

Coil can be rotated by 360°

Suitable for dirty / dusty environment

Solenoid Connectors

Series KA, KB, KC - (Solenoid Connectors 32mm, 22mm, 17mm)

Confirms to DIN 43650 standards

Central screw ensures vibration proof interlocking

Suitable for solenoid valves

Models available with transparent housing and indicator lamps

Connector with circuit to protect the source and load is available

Manually Operated Valves DS2

3/2, 5/2, 5/3 valves

Suitable for 8 bar - G1/8, 10 bar - G1/4, G1/2 air pressure

Mounting provision for individual unit

Suitable for panel mounting

Panel Mounting Valves

Panel Mounting Valve - G1/8

- Spool Design

- Mounting provision for individual unit

Panel Mounting Valve - M5

- Poppet design

- Mounting provision for individual un

Manual & Mechanical Valves

3/2 NO / NC & 5/2 versions

Suitable for 10 bar air pressure

Basic, Roller lever, Finger lever and Foot operated type available

Send Enquiry

Air Preparation Unit (FRL)

Filter

Filter with Manual Drain

Filter with Internal Auto Drain

Filter with Metal bowl

Mist Separator

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Regulator

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Regulator

Regulator with NRV

Lubricator

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Lubricator

Lubricator with Metal Bowl

Filter Regulator Combination

FRC with Manual Drain

FRC with Internal Auto Drain

FRC with Metal Bowl

Sizes: G1/4, G3/8, G1/2, G3/4, G1

FRCL Modular

Filter Regulator Combination Lubricator with Modular

FRCLM without Piping Adopter

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Send Enquiry

http://www.fittingsclamp.com/enquiry.html


PU Tube & Push Fittings

One Touch Fittings

WP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)

Attractive design

Compact size

Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree

Full area of the inner bore of the tubing is available for flow of fluid

Bubble tight sealing of tubes

Suitable for both Nylon and PU tubing

Easy and quick push in connection of tube/easy removal of tube by simple pres sing of collet cap

New design Stainless steel collet

Teflon pre coated male taper threads

Maintenance free and long life

The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet

Polyurethane Tubes Coloured

WH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)

Provide differentiation of air line in pneumatic circuits

Polyurethane Coiled Tube

WHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)

Self retracting & space saving

Send Enquiry

Pneumatic Accessories

Air Blow Gun

WB series (Size G1/4)

Easy handling

Compact size

Attractive design

Good flow and characteristics

Junction box

WJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)

Wide range of models available

Aluminium anodized body

Mounting holes provided

Silencer

AS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)

Brass body and sintered bronze silencer elements

Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control (with spring) types

Good flow and silencing characteristics

Can be cleaned by kerosene and soap water

Tube Holder

WT series (Sizes Ø4, 6, 8, 10, 12mm)

Suitable for Nylon & Polyurethane tubes


One Touch Fittings WP2 series (Sizes Ø4, 6, 8, 10, 12, 14 and 16mm)

Attractive design Compact size

Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree

Full area of the inner bore of the tubing is available for flow of fluid

Bubble tight sealing of tubes







Suitable for both Nylon and PU tubing

Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap

New design Stainless steel collet

Teflon pre coated male taper threads


The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet

Air Blow Gun WB series (Size G1/4)

Easy handling Compact size

Attractive design

Good flow and characteristics

Nipples WN series (Sizes M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)

Wide variety of nipples available Nickel plated brass body

Male (R) taper threads with thread sealant coating, Male parallel threads with sealing washer (M5 only)

Junction box WJ series (Sizes M5, 1/8, 1/4, 3/8, 1/2)

Wide range of models available Aluminium anodized body

Mounting holes provided

Silencer AS series (Sizes M5, 1/8, 1/4, 3/8, 1/2)

Brass body and sintered bronze silencer elements Button, Conical, Silencer cum flow control (with lock nut), Silencer cum flow control

(with spring) types

Good flow and silencing characteristics

Can be cleaned by kerosene and soap water

Quick coupler WQ series (Sizes 1/4, 1/2)

Nickel plated brass body High flow characteristics

Wide range of models


Compact size

Attractive design

Polyurethane Tubes Coloured WH Series - Sizes Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red, Black, Yellow)

Provide differentiation of air line in pneumatic circuits

Polyurethane Coiled Tube WHC series (Tube sizes Ø4, 6, 8, 10, 12mm OD)

Self retracting & space saving

Tube Holder WT series (Sizes Ø4, 6, 8, 10, 12mm)

Suitable for Nylon & Polyurethane tubes

His

Polyurethane Coiled Tube

WHC series (Tube sizes: Ø4, 6, 8, 10, 12mm OD)

Polyurethane Tubes Coloured

WH Series - Sizes: Ø4, 6, 8, 10, 12mm OD (Silver, Transparent, Red,

Black, Yellow)

Quick coupler

WQ series (Sizes : 1/4, 1/2)

Silencer

AS series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)

Junction box

WJ series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)

Nipples

WN series (Sizes : M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)

Air Blow Gun

WB series (Size: G1/4)

One Touch Fittings

WP2 series (Sizes : Ø4, 6, 8, 10, 12, 14 and 16mm)

Filter

Filter with Manual Drain Filter with Internal Autodrain

Filter with Metal bowl

Mist Separator

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Regulator

Sizes: G1/4, G3/8, G1/2, G3/4, G1 Regulator

Regulator with NRV

Lubricator

Sizes: G1/4, G3/8, G1/2, G3/4, G1 Lubricator

Lubricator with Metalbowl

Filter Regulator Combination

FRC with Manual Drain FRC with Internal Autodrain

FRC with Metalbowl

Sizes: G1/4, G3/8, G1/2, G3/4, G1

FRL Modular

Filter, Regulator, Lubricator with Modular FRLM without Piping Adopter

Sizes: G1/4, G3/8, G1/2, G3/4, G1

FRCL Modular

Filter Regulator Combination Lubricator with Modular FRCLM without Piping Adopter

Sizes: G1/4, G3/8, G1/2, G3/4, G1

Accessories

Modular Construction FRL Clamps

Pressure Gauges

Panel Mounting Pressure Gauges

Auto Drain Valve

Shut Off Valve GS2 Series (Sizes G1/4, G3/8, G1/2)

Connecting thread at both ends Connection - G1/4, G3/8, G1/2

Modular mounting with FRL

Shut Off Valve Lockable GS2 Series (Sizes G1/4, G3/8, G1/2)

Modular mounting with FRL Port thread at both ends

Window display to show the valve position • ( i.e.) the valve is in On condition or Off condition

Pressure Switch PW series - Size R1/8

Quick response Easy adjustability of set pressure

Hysteresis adjustable

Pressure Sensor - 2 outputs Digital Pressure Sensor (PS series) - Size R1/8

Set pressure selectable (Mpa, psi, kgf/cm2, bar) Both upper and lower limits of pressure can be set independently

Panel mountable

Direct mountable

Both PNP & NPN versions

Two outputs

Pressure Sensor - 1 output Digital Pressure Sensor (Series PS - R1/8

2 Colours display (Red / Green) Set pressure selectable (kPa, psi, kgf/cm2, bar)

Both upper and lower limits of pressure can be set independently

Panel mountable

Direct mountable

Both PNP & NPN versions

Single output

Regulator R1 series - Sizes G1/4, G3/8, G1/2, 3/4, 1

Conform to ISO 6953 1 Suitable for panel and modular mountings

Non raising Press to Lock adjusting knob for locking at any set pressure

Diaphragm operated, relieving type

Pressure compensated by balanced poppet

Flow compensated in models R14, R15 and R17 (with venturi) for faster response

Good flow and regulating characteristics

Regulator Built in NRV R1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2

Conform to ISO 6953 1 Suitable for panel and modular mountings

Non raising Press to Lock adjusting knob for locking at any set pressure

Diaphragm operated, relieving type

Pressure compensated by balanced poppet

Flow compensated in models R14 and R15 (with venturi) for faster response


Built in non return valve allows free air flow in reverse direction. When the inlet air is reduced by and below the setup pressure

Regulator Built in NRV

R1N Series - Air Regulator (With built in Non Return Valve) - Sizes G1/4, 3/8, 1/2

Lubricator L1 series - Sizes G1/4, G3/8, G1/2, G3/4, G1

Conform to ISO 6301-1 Suitable for Modular mounting

Fog/Mist type

Fine adjustment of lubrication

Steel bowlguard, bayonet type on L14, L15 & L17 models and threaded type on L13 model

Lubrication proportional to flow

Lubricator with Metalbowl L1M series - Sizes G1/4, G3/8, G1/2, G3/4, G1

For higher pressure range above 10 bar Suitable for Modular mounting

Fog / mist type

Fine adjustment of lubrication

Aluminium bowl guard, bayonet type (3/4 and 1" only)

Lubrication proportional to flow

Lubricator with Metalbowl

L1M series - Sizes : G1/4, G3/8, G1/2, G3/4, G1

FRC with Manual drain FRC1 series - Sizes G1/4, 3/8, 1/2, 3/4, 1

Modular type Suitable for panel mounting

Filter • Bronze filtering element • Separator and shield for efficient moisture separation

Regulator • Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated in models FRC14, FRC15 and FRC17 for faster response • Non raising press to lock adjusting knob for locking at any set pressure

Steel bowl guard, bayonet type on FRC14, FRC15 & FRC17 models and threaded type on FRC13 model


FRC with Internal Autodrain FRC1A series - Sizes G3/8, 1/2, 3/4, 1


Filter • Bronze filtering element • Separator and shield for efficient moisture separation • Bayonet type steel bowl guard

Internal auto drain • Float type, no electrical connections required • Provided with manual drain • Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean

Regulator

• Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated for faster response • Non raising Press to lock adjusting knob for locking at any set pressure


FRC with Metal Bowl FRC1M series - Sizes G1/4, 3/8, 1/2, 3/4, 1


Filter • Bronze filtering element • Separator and shield for efficient moisture separation • Press type manual drain for easy operation • Suitable for automatic drain

Regulator • Diaphragm operated, relieving type • Pressure compensated by balanced poppet • Flow compensated • Non raising Press to lock adjusting knob

Aluminium bowl guard, bayonet type (3/4 and 1" only)


Flow Control Valve GR2 series (Sizes M5, 1/8, 1/4, 3/8, 1/2)

Directly mountable on cylinder/valve ports Can be rotated by 360 degree

Fine regulation of air flow

Nickel plated body

Male threads(R) teflon coated

Elegant design and finish

Flow Control Valve - Metal Series GR - Sizes M5, 1/8, 1/4, 3/8, 1/2 (Metal type Flow control valves)

Directly mountable on cylinder / valve ports Fine regulation of air flow

Male threads (G) with sealing washer

Elegant design and finish

Slotted head screw adjusting type

Flow control valve - Inline type GR2 series (Sizes Ø4, 6, 8, 10 & 12mm)

Fine regulation of air flow Elegant design and finish

Available sizes : Ø4, 6, 8, 10 & 12mm

Quick Exhaust Valve GQ series (Sizes M5, G1/8, G1/4, G3/8, G1/2)

Increase the speed of the cylinder With / without silencer

Connection - M5, G1/8, G1/4, G3/8, G1/2

Type GQ01 series is with silencer to reduce the exhaust noise

Pilot operated Non-Return Valve GV2 series (Sizes G1/8, G1/4, G3/8, G1/2)

Available in two versions Low cracking and closing pressure

Bubble tight - elastomer seat

Plastic portion can be turned by 360°

Teflon pre-coated male taper threads

Inline Slide Valve GS1 series (Sizes R1/8, R1/4, R3/8, R1/2, R3/4)

Inline mounted Sleeve type, saves space

Smooth, easy operation

Non Return Valve GV1 series (Sizes G1/8, G1/4, G3/8, G1/2)

In line mounting Low cracking and closing pressure

Bubble tight elastomer seat

AND Valve GA series (Sizes M5, G1/8, G1/4)

AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y)

If two signals of different pressure is applied, the lower pressure is connected to outlet (A).

OR Valve GB series (Sizes M5, G1/8, G1/4 )

OR valve delivers air at the outlet (A) always supplied by higher pressure (X or Y) If two signals of different pressure is applied, the higher pressure is connected to

outlet (A)

Shut Off Valve - Hand lever Series GS3 - Hand lever operated ball valves - G1/4, 3/8, 1/2, 3/4, 1, 1¼, 1½, 2

Ball type In line mounting

Easy and smooth operation

Assembly on rigid pipe system

Maintenance free

Bubble tight sealing

Shut Off Valve - Knob type Series GS3 - Knob operated ball valves - G1/8, 1/4, 3/8, 1/2

Ball type In line mounting

Easy and smooth operation

Assembly on rigid pipe system

Maintenance free

Bubble tight sealing

Janatics complete product range in ready stock delivery from vardhman bearings

Janatics valves dealers , stockiest , importers , janatics pneumatic cylinder , janatics FRLS , janatics

solenoid valves ,

Engineering

Janatics pneumatics AIR valve solenoid dealer vardhman bearings