Offshore shift supervisor cum Offshore Construction Superintendent

Page 1

MUHAMMAD KHAIRUL ABDULLAH

Position : Offshore Shift Supervisor ( Piping/Structure and

Mechanical )

Expected Salary : Negotiable

Address : Lot 1831, Jalan Intan 9, Lorong 9, Vista Perdana, Bandar Baru

Permyjaya, 98000 Miri, Sarawak east Malaysia.

E-mail : [email protected] or [email protected]

Mobile phone : +60111582 2535, +6014 273 2317

PERSONAL DATA

Nationality : Malaysian

City/Town : Sarikei

State : Sarawak

Country : Malaysia

Race : Iban

Age : 42 Years Old

Religion : Muslim

Nric : 730502 -13- 5023

- SEA SURVIVAL : BOSET ( THE COURSE COVER MODULES ON BASIC OFFSHORE

SAFETY,HELICOPTER UNDERWATER ESCAPE TRAINING ( HUET ) WITH EBS,SEA SURVIVAL

BOAT TRANSFER FIRST AID & BASIC FIRE FIGHTING ) : 27.8. 2012 valid until 26.8.2016

- PASSPORT : 26.6.2014 valid until 26.6.2016 (Malaysian International Passport )

Passport No : K 32847348

Page 2

PERSONAL PROFILE

- My working records as well as involvement in oils and gas industry more than 15 years

in (offshore and onshore) for construction and fabrication, Provision of hook-up,

commissioning, Topsides major maintenance (TMM), Facilities improvement project

(FIP), Project upgrading for fire and gas system//UPS/IPS/IDS and F & G. Topsides

corrosion and base maintenance (TCBM), Project repairing, maintenance and

replacement of piping/structural/vessel and tank. Those activities on this job is taught

me the important of interpersonal skills. As an active person in various activities, I have

the opportunities to lead, initiate and manage as well as developing the ability to

work with people with different level and social backgrounds.

- A dedicate and motivate an Offshore Shift Supervisor in local oil & Gas Company in

Malaysia. Project of provision shell hook up, Topsides major maintenance and

commissioning under Sarawak Shell co, ltd/Sabah shell petroleum co, ltd & Petronas

Carigali (Exploration and production Asia/Upstream). Past working experience is as

an Assistant shift supervisor/Rigging & Scaffolding Supervisor/leader man and others

position within 17 years with a wide experience in construction and fabrication site,

oils & gas industries since late 1992. Before working in oils & gas industries, I was

working in Timber Company overseas & local company the project is dealing with

Jacket legs & topsides installation, pipe line, Calm buoy & SPM at the middle

east/Dubai & Kuwait. Possess/Bombay a good communication, Presentation and

interpersonal skills.

KEY SKILLS

Good inter-personal communication skills.

Good leadership skills.

Good computer skills and knowledge of Computerized Maintenance Management

System (CMMS).

Good computer skills.

Good management and supervisory skills.

LANGUAGE & COMPUTER LITERATE

• English

• Malay

• Iban

• Melanau

• Literate in Microsoft Word, Excel, Power Point and Office Management

• Advance computer knowledge

• Microsoft Window software

EDUCATION QUALIFICATION

Page 3

• Passed in Primary 6 certificate Examination – 1981 Till 1986

• Passed in ( Malaysia Lower Certificate of Education – ( SRP ) – 1987 Till 1989 [

Aggregate- 1 ]

• Passed in ( Malaysia Certificate of Education ) SPM – 1990 Till 1991[ Aggregate – 2]

QUALIFICATION / TRAINING & COURSE

-Had attended various safety course and craft trainings in relation to construction

& oils and gas industries Onshore and Offshore and these are not limited to:

Health, safety & environment related course – Main HSE

qualification course attended :

• Occupational, Safety & Health Officer - OSH course conducted by NIOSH-

Malaysia (National Institute Occupational Safety & Health).

• Safety Supervisor course conducted by MIOSH (Malaysian Integrity of Safety &

health).

• Green Card Trainer for construction site under CIDB – Malaysia (Construction

Industries Development Board) Organized by ABM (Malaysian Academy Board &

Malaysian Construction Academy).

• Attended in WHMC – Work Hazards management Course.

• PTW course conducted by BSTS training centre Approved SSB/SSPC and PETRONA

Malaysia.

• Attended course in construction, Factory and Machinery conducted by CIDB –

Malaysia & ABM Board.

COMPETENCY & IN-HOUSE COURSE ATTENDED

• CPR/First Aider & ERT Course.

• PTW system

• H2S course

• Mercury course

• Supervisory communication level course

• Abseiling Technique & WAH emergency rescue plan

• Working at Height & emergency rescue plan

• Hot work procedures

• Lifting & Hoisting Procedures

• Use and Standard Chemical Exposure Hazardous to Health-USCEHH

• Forklift Competency Training below 8 ton Fabrication Yard Training centre

• Malaysian Integrated Occupational Safety And Health (MIOSH) Course

Modules Includes, Self-Motivation, Discipline, Environmental.

• Safety Workshop Management.

• Safety Electrical and Lighting Electricity Shock.

• Compressed Cylinder/Gas Handling Procedure.

• BOSET/Sea Survival, HUET and Basic Fire Fighting course conducted by BSTS

Approved by SSB/SSPC.H2S course.

Page 4

• Hygiene Consciousness at work place

• Confined Space Safety, Gas Detector Use, Lockout & Tag out procedure

• Shot Blasting & Painting Appliance Procedure

• Chemical Handling Procedure and MSDS System

• Site safety supervisor (MIOSH NET )

• HSE induction Course Trainer

• Managing in Occupational, Safety & Health – Construction Site

• Permit Signatory Training

• Safety management System Training

• Accident Prevention Technique

• 12 – Life Saving Rules SSB/SSPC

• EP House Rules SSB/SSPC

• Group Golden Rules SSB/SSP

• Marine Policy SSB/SSPC

• 10 + 1 Hazards Prompt Technique SSB/SSPC

Present Position

Position : Offshore Shift Supervisor.

Company : Dayang Enterprise Sdn Bhd.

Work Location : Work Boat/Barge @ Site Team.

Period : January. 2012 Till To Date

Project : Shell Provision Hook-Up, Construction/Topsides Major

Maintenance & Commissioning

Client : Shell Sarawak Berhad [SSB/EPA]/Sabah Shell Petroleum

Company [SSPC Co. Ltd].

(1)

Offshore Shift Supervisor

Scope of work:

• To be acting as a construction supervisor OR superintendent in event of

meeting/courses and non-available at workplace.

• To lead/monitor/supervise for whole the tasks carried out is accordingly with

company/client and project owner requirement.

To promote Safety program and push for zero accident at work site.

To review of work procedures, testing procedure, installation procedure and JHA.

To Execute planed weekly piping work target to meet progress schedule.

To manage shop welding production.

To represent client in all inspection hold point.

To review and approved cutting plan for shop fabrication of pipe spools and steel

structural.

To orientation and dimensional check during and after fabricated against AFC

drawing.

To check material received against AFC drawing and mill certificate.

To inspect parallelism, levelness of rotating equipment nozzle connection according

to Project and GP standard.

To inspect and witness static equipment installation for levelness, plumpness and

internal inspection.

Page 5

To inspection of completed piping system and Punch piping system.

To supervised and witness Low Pressure Tightness Test of piping system.

To coordination with HSE and QA team for quality inspection and HSSE measures to

ensure safe and quality work place.

• To co-ordinate site technical queries between Engineering and Construction team.

• To assisting a construction supervisor and superintendent to lead/monitor/supervise

for whole the tasks carried out is accordingly with company/client and project owner

requirement.

• To ensure that the work/job is perfecting during project turn around according to the

work schedule/planning and target.

• To co-operate with the offshore field engineer/planner if there is any changes of work

pack/AFC drawing/PI & D drawing by project owner/client and OIM/IMO platform

offshore installation manager/operation ,manager or onshore team.

• To update the project materials/Material taken out (MTO)

piping/structure/mechanical/quality/quantity is available on board/onsite, there for

the whole project will be performed perfectly without any delay.

• To directly report to client CSR/company/Operation manager/field engineer and

Planner.

• To ensure that the whole of the project scope is successful & completed in time.

• Behalf of company site representative/Full responsibility to the whole project

scope/construction crews/HSSE matters whether at workboat/work barge and

workplace.

• Behalf of company side to participate all meeting held by client/vendor & third party

related to project works cope/HSSE and others.

• To update the project scope with project planner/engineer to known that whole the

project scope/progress/target and period in time.

• To responsible to check/request & listing of project materials as per work

scope/materials/tools & equipment specification and quality & quantity standard.

• As a in project schedule/target/progress/meeting as per project duration contract

agreement between client and company.

• As a chairman in HSSE committee meeting/hygiene inspection. To lead the HSSE

officer to investigate any incident/accident or near miss occurred at

accommodation or workplace.

• As a team leader in mustering station/life raft/life boat launcher/ERT/head account in

case of emergency/drills at accommodation or workplace.

• Have a closed communicate & discussion with construction & marine crews/client in

anchor handling & spooling/gangway lifting/ connected & disconnected activity at

workplace.

• To participate in safety day/campaign/program/slogan/incentive/HSSE meeting and

HSSE walk about where’s conduct that is conduct by client & company HSSE officer.

• To ensure that the work/jobs/tasks is carried out by construction crews in safe

manner/each crew is responsible to wear correct/ full PPE prior to commence his

duty at workplace.

• To obligate with CLIENT/HSSE/environmental procedure during & after job completed.

• Ensure the workplace in safe condition/free obstruction/danger gases or chemicals

before/during and after jobs done or before leaving the worksite to avoid injury.

Page 6

(2)

Offshore Assistance Shift Supervisor (March. 2012 to Dec. 2014)

Scope Of Work:

Position : Assistant Shift Supervisor.

Company : Dayang Enterprise Sdn Bhd.

Work Location : Work Boat/Barge @ Site Team.

Project : Shell Provision Hook-Up, Construction/Topsides Major Maintenance &

Commissioning

Client : Shell Sarawak Berhad [SSB/EPA]/Sabah Shell Petroleum Company

[SSPC Co. Ltd].

• To assist offshore shift supervisor/construction supervisor and superintendent to

lead/monitor/supervise for whole the tasks carried out is accordingly with

company/client and project owner requirement.

• To ensure that the work/job is perfecting during project turn around according to the

work schedule/planning and target.

• To co-operate with the offshore field engineer/planner if there is any changes of work

pack/AFC drawing/PI & D drawing by project owner/client and OIM/IMO platform

offshore installation manager/operation ,manager or onshore team.

• To update the project materials/Material taken out (MTO)

piping/structure/mechanical/quality/quantity is available on board/onsite, there for

the whole project will be performed perfectly without any delay.

• To report to duty construction shift supervisor and construction superintendent at

worksite/work boat/work barge.

• To refer/review the details of client/project AFC drawing/PI&D/updating work scope.

• To update the project scope with project planner/engineer to known that whole the

project scope/progress/target and period in time.

• To attend the project meeting/DPR/ and progress meeting is held on work

barge/workboat.

• To monitor heavy lifting/scaffolding/blasting & painting/pressurize/hydro testing and

other critical activity at worksite.

• To have a communication & handover to avoided miss – understanding between

workers/supervisor each of shift.

• To involve in daily progress/HSSE meeting at designated workplace.

• To lead the construction teams to execute the job at site as per HSSE/client

procedure/law & regulation.

• To verify/check/walk-about/SSP (site safety procedure) meeting upon arrival at work

location presentation by client.

• To have a closed work with project/construction MATCO to update the

COG/inventory/listing of materials availability at work site.

• To prepare/submit & update the PTW (permit to work) form to client/representative at

site for reviewing and approving.

Page 7

• To conduct daily pre-job discussion/brief the crew about new hazards and how to

mitigate before commence a jobs.

• To Communicate/Observe/monitor with construction crews/client/vendor and other

party.

• To monitor the crew closely during their duty to ensure that it is meet the client

standard/procedure .Whether it is from HSSE/quality and quantity side.

• To ensure that all the is according to the client procedure/Tasks.

• To ensure that the workplace is in a safe condition/free from obstruction.

(3)

Offshore Rigging & Scaffolding Supervisor (Jan.2009 till Dec.201

Position : Rigging/Scaffolding Supervisor.

Company : Petra Resources Sdn Bhd.

Work Location : Work Boat/Barge and FPSO Gemusut Kakap sabah deep water

Project : Shell Provision Hook-Up, Construction/Topsides Major Maintenance &

Commissioning

Client : Shell Sarawak Berhad [SSB/EPA]/Sabah Shell Petroleum Company

[SSPC Co. Ltd].

Scope of work:

• To liaise with construction shift supervisor/construction supervisor @

Superintendent, field engineer and key personnel to plan the

works/preparation according to work pack/work scope by client.

• To inspect and witness Hydro-testing, leak test, flushing and air drying

activities.

• To review material test certificate and all pressure testing calibration

certificate.

• To supervised and witness Low Pressure Tightness Test of piping system.

• To conduct weekly audit on PTW system, Pre Task Talk, LOTO, QAQC and

Housekeeping.

• To coordination with HSE and QA team for quality inspection and HSSE

measures to ensure safe and quality work place.

• To coordinate site technical queries between Engineering and Construction

team.

• To arrange scaffoldings, material and man power for hook up activity.

• To arrange facilities for back-up sub-contractor working at site.

• To lead the piping team in the installation, erection and testing

of piping works.

• To killing punch-list for ready hydro testing.

• To re-instatement of piping after hydro testing.

• To review drawings such as Isometrics, P & ID, Pipe supports prior

implementation at site.

• To liaise with sub-contractor on work schedule, manpower availability and

work activity.

• To attend construction meeting for work progress & discussion regarding

matters pertaining to piping works.

Page 8

• To liaise with on board duty CSR/Deputy CSR and other’s personnel in-charge

where’s assigning by client to ongoing project in certain position or categories

• To lead the construction crew to execute the jobs as in work

pack/tasks/details of the project.

• To ensure that the work is carried out according to company/client/activity

owner standard & quality as a policy.

• To support the marine crew in AHT (anchor handling & deploy soft moor

attached to platform or jacket legs as anchor pattern required.

• As a focal point in lifting/hoisting/rigging & scaffolding activity at workplace.

• To involve in pre – shutdown & pre – start-up works on offshore.

• To plan 24hrs tasks ahead, Prepare the PTW where’s relating to jobs was carry

on at platform and jacket.

• Pre-check, visual inspection on all tools & equipment before starting the work.

• To brief the crew about hazards created before, during and after the work

has been done during tool box meeting & pre-jobs discussion at site.

• To monitor, surveillance and supervise the crew closely at worksite.

• To guide the new comer to commence their duty.

• To communicate with PLS or SSB personnel, crew before working at any

location on platform/jacket although there is green or brown field.

• To direct and supervise/coordinate and control all aspect the crew in

erection, modify & dismantling activity onsite.

• To ensure that only trained & competence or qualify scaffolder is allowed in

scaffolding tasks and must have a adequate experience.

• To visually check fitness/quality on scaffolding materials/equipment and fitting

to be used.

• To ensure that scaffolding built up on strongly/firmly ground or base.

• To familiar with BS 1139 accordingly (Malaysian standard).

• To ensure that scaffolder involved directly in scaffolding activity especial

working at height(WAH) are known their rescue procedures during an

emergency case and escape route/designated muster station/alternative.

• To identify/recognise and mitigate the hazards or apply stop work policy if

unsafe work condition.

• All scaffolding structure/platform must be inspected by “scaffolding inspector

“prior to occupy on.

• Ensure that scaffolding tag are install or displayed visible on scaffolding on

green tag mean is safe for use or red tag is structure/platform not safe for use.

• To lead/person in charge the crew in general rigging, hoisting, lifting or

shifting, manual handling and transferring to location.

• To understand with the client quality & standard, HSSE house rules &

procedures included permit to work system (PTW) requirement.

• To ensure that the worksite is surely free from any obstruction & hazards.

• To ensure the crew is wearing appropriate PPE, adequate and suitable on

their tasks with a safe manner.

• To attend the SSP (site safety procedure) & SIMOP simulate operation

cascading meeting held on platform living quarters.

• To leader the HSSE campaign, Poster, Scheme, Program, Slogan, Incentive,

Awareness, and Lesson learn and training at worksite or training Centre ware’s

provided/Approved by client.

Page 9

• To encourage the crews to attend any HSSE & Trade courses and seminar to

improve their capability and Skills in carrying their duty safely/accordingly.

• All personnel have the duty to “STOP WORK “if the works/jobs & tasks is likely

deemed unsafe condition.

My Working experience base on the following:

• Carrying out Hydro testing works for piping if it’s conformed by RT technician or

welding inspector on site.

• Re-instatement test either using water or N2, it’s accordingly as procedure’s said in

project work pack, for the entire piping after tie –In (TP).

• Purging using N2 for cutting piping line to in forced any kind of gases trap inside the

line before cutting, spading, blind off, spectacle blind reverse, breaking flange ,drop

spools and where’s works or tasks relating to mechanical & piping.

• Purging @ injecting the N2 into vessel, tank and piping line to cease out any

remaining gases or hydrocarbon before any breaking flanges/vessel

opening/entering and spading activity as the SSB procedure.

• Leak test/function test or running test either using the hydraulic or compress air on any

type @ kind of equipment on SHELL facility as per SSB procedures.

• Tank or Vessel installation/Removal, maintenance, services and cleaning an onshore

and offshore especially at SSB & Carigali platform/Jacket and facility.

• Referring to drawing e.g. PI & D, Iso metric drawing, GA, piping, structure, flows

,process and mechanical plan to get actual & right site measurement & location

where it is been installed and removed, is requested by the project field engineer.

• Involving in heavy lifted to hook up & installation the new topside, Vessel, Structure

and tank .etc. from materials barge to platform.

• Planning, Preparing, Setting up & supervising any lifting activity included managing

the work task that is assigned by the leader.

• As a team leader in Assisting client in mechanical & commissioning works prior to

platform, Jacket& plant charge-up and start-up.

• Supervising in lifting activities to connect or disconnect primary gangway from

workboat & work barge onto platform as per gangway sketch approved from PCS

(Production and engineering services & SSB/SSPC.

• As a Frontline &Leadership in executing the job tasks, controlling and minimizing the

work hazards.

• Install ting/Removing & Maintaining the SBM at LCOT Labuan, floating hose, CALM

BOUY & SPM at Middle East (Kuwait).

• Assisting SSB/client vendor to install, remove, maintain& services the turbine GTG,

Moto condensate/glycol/sum caisson pump, fan cooler, cooler plug, ball valve and

others at platform.

• Being a team leader in heavy lifted, Pipe line and marine tasks at cat 1 & cat 3

include an overseas project.

• Assisting by company SSB vendor to carry out Well Head services & maintenance.

• Working together with millwright to install/remove, Align & Adjust the mechanical &

piping material/equipment.

• Presenting the works planning during daily progress meeting (DPR) to the client.

Page 10

SCAFFOLDING/RIGGING COURSE

• Rigging and Slinging Course Conducted by BSTS training centre Approved SSB/SSPC

and PETRONAScarigali Malaysia.

• Introduce of Hoisting and Lifting Operation Course Conducted by BSTS training centre

Approved SSB/SSPC and PETRONAScarigali Malaysia.

• Banksman Course Conducted by BSTS training centre Approved SSB/SSPC and

PETRONAScarigali Malaysia.

• Advanced Banks man Course Conducted by BSTS training centre Approved SSB/SSPC

and PETRONAScarigali Malaysia.

• P.I.C – Person in Charged for whole Lifting, Rigging, Slinging and Hoisting operation on

Platform onshore & offshore site Conducted by BSTS training centre Approved

SSB/SSPC and PETRONAScarigali Malaysia.

• Lifting Equipment Focal Point – LEFP Conducted by BSTS training centre Approved

SSB/SSPC and PETRONAScarigali Malaysia.

• Implement in Colour Coding on Slings & other Lifting Tackle and Equipment in house

Training conducted by SSB/SSPC and PETRONAScarigali Malaysia.

• Platform Crane Signals Man in House Training conducted by SSB/SSPC and

PETRONAScarigali Malaysia.

• Safe Lifting Operation at Platform Safety Code of Practice in House Training

conducted by SSB/SSPC and PETRONAScarigali Malaysia.

• Scaffolding Course, Basic and Part I Conducted by Mega United Skills MU Training

Centre Approved by SSB/SSPC and PETRONAScarigali Malaysia Certified by CIDB,

NIOSH and DOSH Malaysia.

• Scaffolding course, basic part I & II conducted by Mega United Skills (MU) training

centre Approved by SSB/SSPC/PETRONAScarigali at Miri, Sarawak.

General Responsibilities/Duties While Working As HSE Personnel is based on the

following below : • Main duties is to ensure the company project HSE plan is properly implemented and

shall meet client’s HSE standard and expectation , As well to monitor the entire

operation shall not contravene to local laws and regulations. The responsibilities are

as followed:

• Implemented approved project HSE management system.

• Develop, Implemented and manage tools for recording of HSE performance

measures.

• Regularly representing HSE department during meeting with client and solve raise

safety issues.

Page 11

• Conduct HSE audit/inspection and follow-up on remedial actions/re-corrections and

close-out.

• Conduct safety briefing and orientation for new personnel to certificate in the

project.

• Attended safety meeting as specified in project HSE plan.

• Accident/incident investigation and close-out.

• Prepare job safety Analysis [JHA] or risk assessment.

• Conduct Company’s in-house craft training such as rigging, Scaffolding, Welding,

Cutting, Confined space entry, Forklift safe operation and organize any specific

training required during the project period.

• Compiling weekly and monthly HSE reports.

• To monitor/implemented of PTW Systems at workplace.

• Initial and participate in TBM/Pre-jobs discussion conducted by supervisory personnel

and sub-contractors supervisory personnel.

• Maintaining relevant HSE filing systems and libraries at worksites.

• Carried out for drugs & alcohols test [Urine test] by daily at yards clinic.

• Investigate

• To understand the project HSE Policy & HSE – MS, Established strategic approaches to

implement project HSE – MS by defined rules of team leader and influence them in

safe practices.

• To provide barge management with advices, initiatives safety information on all HSE

matters.

• To evaluate facilities and advices management on need for modification open

necessary.

• To ensure safety standards develop with critical, local authorities including codes of

practice and company HSE requirement.

• To stay current on HSE related legislation ACTS and advices management on

potential impact.

• To arrange safety training to meet side induction and training requirement.

• To provide safety standards HSE activities plan and control for construction,

Maintenance, Commissioning and hook-up at barge and platform [Offshore].

• To review and prepare safety procedure in order to meet client safety standard and

code of practice.

• To assists barge clerk in manage to develop the suitable hazards control interventions.

• To schedule and coordinates safety activities and program.

• To liaise with Construction Supervisor & Barge Superintendent on critical safety task

requirement and solution.

• To prepare daily, Weekly and Monthly report and statistic.

• To conducted safety tool box talk, Presentation as required during the project period.

• To review and compile daily hazard observations report, Safety walkabout and site

visit by management and on actions as soon as possible.

• To conduct accident, incident and near missed site investigation report/ Conduct

safety Inspection and audit.

• To review barge crew HSSEO performance periodically and develop improvement

action plans.

• To liaise with tower operator on critical weather condition, standby and abandon if

necessary.

• To review in-coming and out-going crew on barge.

Page 12

• As an In charge, In muster station on head account and lift raft preparation if

emergency case like abandon the barge immediately and emergency boat transfer

& boat to boat.

• To setting up safety induction for new comer and video presentation.

• To lead in inspection of tools & Equipment/safety walk about on site.

• Conduct Tool Box Talks, HSE and committee meeting.

• To organize the safety/food committee meeting and Welfare.

• To encourage the crew in safety competition e.g. poster, Slogan, Scheme and

incentive.

• To organize the company/client HSSE Day and achievement without LTI/LTA Zero

accident during the project period.

RIGGING DUTY/ROLE & RESPONSIBILITY

• Any statutory requirement or regulation e.g. Latest edition of Department of

Occupation Safety and Health Factories and Machinery 1967 act [ACT 139]

requirement on inspection frequency.

• Understand the project Lifting procedure-MS and requirement during the period of

project, Established strategic approaches to implement project Lifting procedures –

MS by defined rules of team leader and influence them in safe practices.

• Every lifting shall have an assigned Person in- Charged or Banks man to control the

lifting operation.

• All lifting appliances used must have current colour code clearly visible.

• All personal involved in lifting should have up to date and formal training required for

their role, Complete PPE must be worn during lifting operation carried out.

• Ensure all lifting equipment used for transferring of personnel must be certified for man

riding.

• Ensure all lifting equipment should have currently valid certificate of fitness.

• Rigger and Slinger should be formally trained in rigging and slinging method.

• Ensure the use of correct PPE & rigging technique and equipment during lifting

operation. Ensure the rigger before start or during should be (by example, visual

check] of lifting equipment are in good condition before use. Check all lifting

appliance are colour code before use and participate in JHA, Tool Box Talk & Pre-Job

discussion at site before starting the task.

• Direct and supervise all lifting activities at their responsibilities area and make sure

other personnel are not entering into lifting area.

• Only source of signal and instruction for crane operator are allowed.

• Must be not involved in load handling and rigging other than.

• Check for correct rigging and slinging technique.

• Recognized a potential lifting hazard around work area and eliminate it immediately

or report it to designated personnel.

• Competent with API standard hand signals or using radio if that area recovered by

and visibility no clearly.

• Must have adequate experience in rigging and slinging.

• Coordinate and control all aspects of lifting operation.

Page 13

• Verify that all personnel involved are trained/competent and aware of the task,

Procedure and their responsibilities and ensure job safety and efficiency at all time.

• Recognized and control of hazards or unsafe condition or stop work policy.

• Liaise with crane operation in all condition during lifting operation carried out at

platform and work boat/barge.

• Check and liaise with tower operation for wind speed, weather focus and wave

condition.

• Put lifting signage where lifting activities where’s carried out.

• Perform Job Hazards Analysis (JHA) at work site specify to current job are carried out.

• All personal are involved in lifting operation shall be, Medically fit

• Familiar by formal training with the equipment and procedure followed

• Familiar with lifting plan and attend the tool box meeting or briefing prior to the lift

• All personnel have the duty to STOP WORK if the condition or work is deemed to be

unsafe.

SCAFFOLDING DUTY/ROLE & RESPONSIBILITY

• Any statutory requirement or regulation e.g. Latest edition of Department of

Occupation Safety and Health Factories and Machinery 1967 act [ ACT 139 ]

Building and Construction Operation ACT requirement on inspection frequency.

• Understand the project Scaffolding procedure-MS and requirement during the period

of project, Established strategic approaches to implement project scaffolding

procedures – MS by defined rules of team leader and influence them in safe

practices (BS 1139).

• All scaffolding material and equipment to use at site must be approved and certified

by SSB/SSPC and PETRONAScarigali Malaysia.

• Scaffolding material & equipment are comfort BS 1139 standard including scaffolding

plank should be certified by SSB/SSPC and colour coding as per project requirement.

• Every erection and modification shall have assigned a person in charged to minimize

damage to equipment.

• All personal involved in erection, modification& dismantling should have up to date

and formal training required for their role, Complete PPE must be worn.

• Ensure scaffolding platform are clearly marked follow is state by category e.g. Very

light duty, Light Duty and Heavy Duty and Scaffolding tagging.

• Must inspect and up to date by Foreman and scaffolding Inspector shall have valid

tagging of fitness.

• Scaffolder should be formally trained in scaffolding erection, Modification and

Dismantling.

• Ensure the scaffolding erected firmly on ground and stability condition. Ensure the

scaffolder before start or during should be [by simple visual check] of scaffolding

material are in good condition before carrying any erection.Any of Erection,

Modification and Dismantling shall be confirmed by Scaffolding Inspection before

use.

• Surrounding area must be putting sign board to aware people working around.

Page 14

• Familiar by formal training with the equipment and procedure followed.

• Familiar with scaffolding erection, modification and dismantling and attend the tool

box meeting or briefing prior to the job.

• All personnel have the duty to STOP WORK if the condition or work is deemed to be

unsafe.

• Scaffolding material & equipment should place at protected area.

Working History While Serving As HSE and Rigging & Scaffolding

(4)

• Position : Offshore Leader Man

Company : Hyundai heavy Industries @ HHI Co, Ltd

Work Location : HD - 423 DLB [ Derrick Laying Barge ] @ Kuwait Gulf Offshore, Dubai,

Abu Dhabi, Middle East / Saudi Arabia & India.

Period : 2007 till Dec.2008

Project : 56” Pipe Line 450 KM,8 Leg Jacket Installation & Pile, Maintenance

and Construction of Single Pumping Mooring [ SPM ] Cater nary Anchor Leg

Mooring [ CALM BUOY ], [ PLEM ] and Floating hose installation and Platform

Client : Kuwait Oil Company [KOC] AL-Ahmadi Platform

Offshore : Kuwait Deep Water.

Work of scope:

To assist rigger foreman in slinging/rigging and lifting activity for pipe laying

and heavy lifted tasks.

To lead the barge crew on routine lifting activity on cat 1 barge, included

preparing/installation all lifting appliance/tackle, equipment prior to

commence heavy lifted job.

As a signalman for lifting activity in upload & backload materials via

supply/dump/anchor tug boat.

To lead the crew in scaffolding erection, modification and dismantling as

require by team.

To assist barge electrician, engine & mechanic in repair, install and

maintenance.

To lead the crew in material shifting, transferring and manual handling.

(5)

Position : Offshore Rigger

Company : Hyundai heavy Industries @ HHI Co, Ltd

Work Location : HD - 423 DLB [Derrick Laying Barge] at Bombay Heights, India Gulf.

Period : Feb. 2005 Till Dec. 2007

Project : Installation of 8,16 & 32” Pipe Line 350 KM, Construction, Maintenance

and Hook-Up of [PLEM, CALM BUOY & SPM]

Client : ONGP India Oil Company Limited

Offshore : Indian Offshore.

Work of scope:

To carry out a routine rigging/lifting activity as order by Team Leader.

Slinging & rigging/Installation of lifting appliance/tackle, equipment prior

to commence heavy lifted job.

Assisting the other team in various jobs on barge or platform/jacket.

Page 15

Carry out the duty with smooth and safely.

(6)

Position : Safety @ HSE Coordinator

Company :Richall Engineering Sdn Bhd

Work Location : Malaysia Shipyard and Engineering Sdn Bhd (MSE) Fabrication Yard

at pasir gudang, johore bahru.

Period : Jan. 2003 Till Dec. 2004

Project : FPSO Sub-Structure, Jacket, Modules and Topsides Project

Client : Saipem S.A Nigeria Deep Water Co, LTD

Work of scope:

To assist in the development and review of safety case requirements and

performance standards.

Advice and support operations in terms of HSE initiative and processes.

Conduct investigation on any incident/accident and proposed corrective

and preventive action

Dealing with all matters relation to the development and implementation of

the HSE management system

To conduct safety briefing and toolbox muster for site workers

Investigate the nature and causes of accident in the workplace.

Follow strictly all exits and future policies implemented.

Perform other related duties incidental to the work described here in and/or

other functions which are logical assignments to the position.

(7)

Position : Safety @ HSE Officer

Company : Muzamir Construction and Engineering Enterprise

Work Location :Sime Sembcorp Engineering Sdn Bhd [SSE] Fabrication Yard at pasir

gudang Johore Bahru.


Project : Construction, Piling and Built of AMENAM AMP2 Jacket, Sub-Structure

and Living Quarters.

Client : Saipem S.A Nigeria Deep Water Co, LTD

Work of scope:

Responsible in providing the advice on measuring to secure the safety and

health of employees, and assist in organizing OSH programs.

In charge of HSE Operation of 12 collegues, on EMT/EMP, safety briefing,

accident investigation and etc.

Inspect the workplace and take part in inspections carried out by

management.

Investigate serious accidents, dangerous occurances and occupational

diseases.

Page 16

Assist in investigating accidents, check their reports and risk control measures

implemented.

Keep statistics on accidents, diseases and dangerous occurences at the

place of work

Interpret instructions and issues arising, and implement actions according to

safety and health’s policies and procedures.

Adhere to health and safety policy, and other requirement relating to care

of equipment.

Adhere to procedure relating to the proper use and care of equipment and

material for which the role has responsibilty.

To implement and ensure the compliances of company quality system, i.e

ISO 9001:2008

Perform duties as assigned by Top Management

(8)

Position : Safety @ HSE Promoter

Company : Sime SembCorp Engineering Sdn Bhd [SSE]

Work Location : Sime Sembcorp Engineering Sdn Bhd [SSE] Fabrication Yard at Pasir

Gudang, Johore Bahru.

Period : Jan. 2001 Till 01 Dec. 2002

Project : Construction of B11P-A Process & Utility.

Client : Sarawak Shell Berhad/Sabah Shell Petroleum Co, Ltd [ SSB/SSPC ]

Work of scope:






management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


(9)


Company : Hin Loon Engineering Sdn Bhd

Work Location : SimeSembcorp Engineering Sdn Bhd [SSE] Fabrication Yard at Pasir

gudang, Johore Bahru.

Period :Jan. 1997 Till Dec. 1999

Page 17

Project : Construction/Fabrication the JNDR-A & B11 DR-A module/jacket, Sub-

Structure & Top Sides


Work of scope:






management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


(10)


Company : Richall Engineering Sdn Bhd

Work Location : Malaysia Shipyard and Engineering Sdn Bhd [MSE] Fabrication Yard at

Pasir Gudang, Johore Bahru.


Project : Fabrication and Construction of E11K-A Sub-Structure, Jacket, Top

Sides and Module.


Work of scope:






management.


diseases.


implemented.


place of work



Page 18


of equipment.




ISO 9001:2008


(11)

Position : Safety @ HSE Supervisor

Company : Kokusai Keiso & P.J Indah Instrumentation and Electrical Work Sdn Bhd

Work Location : Shell SMDS Construction Site at Tanjung Kidurong, Bintulu. Sarawak


Project : Re-Construction and Expansion of Shell SMDS Plant and Tank.

Client : Shell MDS Co, Ltd

Work of scope:






management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


(12)

Position : Safety @ HSE Officer

Company : Yelico Showa Denki Electrical & Instrumentation Sdn Bhd

Work Location : Titan Polymer Production Co, Ltd


Project : Re-Construction & Expansion of Titan Refiner

Client : Titan Polymer Production Co, Ltd

Work of scope:



Page 19




management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


(13)


Company : Yew Seng Engineering Sdn Bhd

Work Location : Malaysia Shipyard and Engineering Sdn Bhd [MSE] Fabrication Yard at



Project : To construction &Fabricate the jacket legs, Topsides & Structure of

Helang Platform at MSE yard.

Client : Nippon Steels Co.Ltd

Work of scope:






management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


Page 20

(14)


Company : AHS Engineering Sdn Bhd

Work Location : Sime Sembawang Engineering Sdn Bhd[ SSE ] Fabrication Yard at


Period : Jan.1993 Till Dec. 1994

Project : To construction, Fabricate of MP3 Module, Jacket & Sub-Structure

Client : SSB/SSPC [Malaysia] Sdn Bhd

Work of scope:






management.


diseases.


implemented.


place of work




of equipment.




ISO 9001:2008


(15)

Position : Forklift Operator

Company : Rimbunan Hijau Plywood Factory Sdn Bhd

Work Location : Sibu, Sarawak East Malaysia

Period : Jan.1991 Till Dec. 1991

Yard : Timber/Logging yard/Log pond

Page 21

Work of scope:

Responsible in operate the forklift to lifted and transfer the plywood bundle

to location.

To stack/arrange and manage the logs on loading bay.

To assist the factory foreman to promote the safe & healthy working

environtment.

Thank You