Q4 2016 Mainstream Products -Applications and New Product Update

Mainstream Products include…

Oscilloscopes• Integrated Logic Channels

• Integrated Function Generator

• Integrated Spectrum Analyzer

• Serial Bus Decoding

• Power Analysis

• Jitter Analysis

• Wide Range of Probes

Power Analyzers• Up to .04% Accuracy

• Single Phase and Three

Phase

• Measure Standby, Efficiency,

Inrush, Harmonics, Input

Power

Source Measure Units (SMUs)• Characterize Devices

• Four Quadrant Source and Sink

• Charge/Discharge Testing

• Electrochemistry

• Sensitive, Low Level Measurements

Arbitrary Function

Generators and RF

Sources• Create any Type of Signal –

Analog or Digital, Ideal or

Distorted, Standard or

Custom

Spectrum Analyzers• EMI Pre-compliance Testing

and Wireless Integration

• Interference Hunting

• Component and System

Design and Test

Power Supplies and

Electronic Loads• Programmable Voltage and

Current

DMMs, Data logging, and

Precision Switch Systems• Up to 576 Channels

• Continuity and Low Resistance

Testing

• Production and Functional Testing

Mainstream Applications include…

EMI/EMCEMI Pre-compliance Testing

RF and Wireless Component Testing, Network Testing

Interference Hunting

Wireless Standards Testing

IoT Device and Sensor TestingDesign and Test of MEMs and other Sensors

Low Level Power Consumption Analysis

Wireless Transmit and Receive

Battery Modeling, Simulation, Characterization

Semiconductor Device Design, Test,

and Characterization

Mainstream Applications include…

Power Analysis and Energy EfficiencyComponent Testing and Characterization

Power Supply and Power Converter Design

Efficiency, Standby Power, Harmonics, Inrush

AC and DC Power Measurements

Data Acquisition, Switching, and Control

Data AnalysisSerial Bus Protocol Decode and Debug

Jitter Analysis

Compliance Testing

Materials Science Electrochemistry

Resistivity and Conductivity

Ultra-Low Measurements

What’s New?

Tektronix MDO4000C The only scope to offer synchronized analog, digital and RF signal analysis at the

same time• Deep memory – standard 20M point record

length on each analog and digital channel,

with user controllable sample resolution for

high accuracy

• Dedicated front panel pan/zoom controls;

consistent measurement results even when

zooming; automatic searching

• Industry-lowest 3.9 pF passive probes are

standard

• Optional 50 MHz Arbitrary/Function Generator

• Optional16 channel Logic Analyzer with

16.5Gs/S MagniVu® high speed acquisition.

• Optional Protocol Analyzer with Tektronix

industry best features

• Optional Spectrum Analyzer with frequency

range up to 6 GHz, enabling synchronized

capture of analog, digital and RF

Read more, watch videos at http://www.tek.com/oscilloscope/mdo4000c

Tektronix TBS2000 Digital Storage Oscilloscope

Designed for outstanding waveform

visualization and analysis

• 2 and 4 analog channel models

• 100 and 70 MHz bandwidth models

• Up to 500 MS/s sampling rate

• 20 M record length on all channels

• 32 automated scope measurements

• Tek VPI probe interface supports active,

current, and differential probes with

automatic scaling and units

• 9-inch WVGA color display

• First basic oscilloscope with Wi-fi dongle

support; LAN with LXI compatibility is

included. TBS2000 can be remotely

accessed on any device on the same

network with a web browser

• 5 year warranty

Read more, watch videos at

http://www.tek.com/oscilloscope/tbs2000-basic-oscilloscope

IsoVuThe first, and only, measurement system capable of accurately resolving high

bandwidth, differential signals, in the presence of large common mode voltage

• Optical communications and power-over-

fiber for complete galvanic isolation

• Bandwidths from DC to 1 GHz

• 1,000,000:1 (120 dB) Common Mode

Rejection up to 100 MHz; 10,000:1 (80 dB)

Common Mode Rejection at 1 GHz

• 2,000V Common Mode Voltage

• Up to ±50 Differential (DC + pk AC)

• Output Clamping

• Safety Certified

Read more, watch videos at http://www.tek.com/isolated-

measurement-systems

TekScope Anywhere Waveform Analysis SoftwareCollaborate, Analyze, Document Offline

TekScope Anywhere™ brings the power of

oscilloscope analysis environment to the PC:

• View, measure, and analyze data captured in

a lab, independent of the oscilloscope

hardware

• 50+ Parametric and Cursors Measurements

• Conduct Jitter analysis on your PC

• Interactive plots, including zoom functionality

• Easily document measurement results and

configuration details with detailed test report

Compatible with most common Save/Recall waveform files, independent

of the hardware acquisition, including: Tektronix, LeCroy, and Keysight

oscilloscope formats (wfm, .isf, .csv, .h5, .tr0, .trc, and .bin).

Read more, watch videos at

http://www.tek.com/datasheet/collaborate-analyze-document-offline-2

2450, 2460 SMUsThe World’s First Source-Measure Unit Instruments with Touchscreen

Technology

Source and measure voltage or current via touchscreen or programmatic

interface

4 quadrant operation for “sinking” current and voltage

High dynamic range and high sensitivity

Standard front banana and rear triax connectors

Scalability – multiple units can be cascaded via TSP-Link

Free software for control and acquisition; drivers for programmatic control

Models:

2450 - 20W / 1A max

2460 - 100W / 7A max

See all SMU products at http://www.keithley.com/products/dcac/currentvoltage

2461 SMU Touchscreen DC Power Analyzer with high power and high accuracy

Pulse up to 10A or 1000W; 7A maximum current, 100W maximum power

Tightly coupled instrument that combines the capabilities of analyzers,

curve tracers, and I-V systems at a fraction of their cost

Dual 18-bit 1MS/s digitizers for fast sampling and measuring both current

and voltage simultaneously

Storage for 5M readings

Built-in contact check for reliable production testing; standard front and rear

connectors

Free software for control and acquisition; drivers for programmatic control

See all SMU products at http://www.keithley.com/products/dcac/currentvoltage

Tektronix PA3000 4-channel, Multi-phase AC/DC power analyzer

1 to 4 channel power analyzer optimized for

testing today’s single and multi-phase, high

efficiency power conversion products and

designs.

• 1 to 4 channels supports single-and three

phase applications

• Low 20 mW standby power measurements

• 1 MHz bandwidth

• Harmonic analysis to 100th order

• ±0.04% basic voltage and current

accuracy

• Standard power supply for external

transducers

• Free PWRVIEW software for PC based

control and data acquisition.

Read more, watch videos at http://www.tek.com/power-analyzer/

USB Real-time Spectrum AnalyzersGreat Performance, low cost

RSA500 Series• 9 kHz – 3 or 7.5 GHz

• 40 MHz real time bandwidth

• Field ruggedized

• Optional tracking generator

• Battery operated or AC line

RSA600 Series• 9 kHz – 3 or 7.5 GHz

• 40 MHz real time bandwidth

• Optional tracking generator

• AC line powered

RSA306B• 9 kHz – 6 GHz

• 40 MHz real time bandwidth

• Field ruggedized

• USB3.0 Powered

Ideal for the Lab Ideal for the Field Highly Portable

SignalVu Software From Basic RF to Advanced Analysis

ONE PLATFORM, ONE CUSTOMIZABLE SOFTWARE

Traditional Spectrum Analyzer

Functionality

17 Measurement Displays with Many

Automated Measurements

Real-time Measurements

Vector Signal Analysis

Spectrum Masks

Compliance Testing

Mapping and Signal Survey

Basic Advanced

DMM7510 7½-Digit Touchscreen Graphical display with great accuracy, speed, and usability

Touchscreen interface with graphical display

1MS/sec,18-bit digitizer

High speed with high accuracy - 1uA resolution

at 1PLC

Advanced triggering on voltage or current

levels, enabling capture at precise event

Large internal memory stores 11M readings in

standard mode or 27.5M readings in compact

mode.

Free software for control and acquisition;

drivers for programmatic control

See all DMMs at http://www.keithley.com/products/dcac/dmm

2281S Battery Simulator and Precision DC Power Supply

Create a complete battery model during

battery testing

Precision DC power supply, with DMM-quality

high resolution, low current measurements

capability

Optimized performance for production tests

Read more, watch videos about the 2281S at

http://www.tek.com/dc-power-supply/series-2281s-battery-simulator

Series 2380 DC Electronic Load

Single output, standalone loads with

200W, 250W and 750W models

Multiple operation modes including

constant resistance and constant

power, with up to 25 kHz of dynamic

cycling

Superior voltage/current resolution

and read back accuracy

Built-in battery test mode

List mode to support complicated

current changes

Read more, watch videos about the 2380 series at

http://www.tek.com/dc-electronic-load/series-2380

AFG3151C, AFG3152C 150 MHz Arbitrary Function Generator

150 MHz Bandwidth, 1GS/s Sample Rate

Single and Dual Channel Models

FREE Arb Express software to create or edit

waveforms for playback on AFG

See many more AFGs at http://www.tek.com/arbitrary-function-generator

Low cost potentiostat.

Real-time plotting on front panel.

Electrochemistry Measurements -

• Cyclic Voltammetry

• Open Circuit Potential

• Line, Square Wave, and Pulse

Voltammetry

• Chronoamperometry

• Chronopotentiometry

Electrochemistry Potentiostats2450 or 2460 Touchscreen SMU with eChem Test Scripts and Probe

Read more, watch videos at

http://www.tek.com/electrochemistry-lab-systems

Let me know how I can help you succeed.

Jeff SableMainstream Sales Manager – New England I manage sales of Tektronix and Keithley products through our distribution partners throughout New England.

jeff.sable@tektronix.com