Upload
ahmadreza-aminian
View
297
Download
20
Tags:
Embed Size (px)
Citation preview
Transient Heat
ConductionPRESENTED BY: A.R. AMINIAN
1
First things First….
An Introduction to Metallurgical Engineering…
Metallurgy…what does it mean?!
2
An intro to Lumped Element
Method (LEM) [1]
Lump means that the interior temperature remains essentially
uniform at all times during a heat transfer process…
…The temperature of such bodies can be taken to be a function of
time only, T(t)…
…Lumped system analysis, provides great simplification in certain
classes of heat transfer problems without much sacrifice from
accuracy.
3
LEM Applicability
Ex1: the Copper Ball
Ex2: the Roast Beef
4
Lumped Element System:
the Definition
Consider a body of arbitrary shape, At time t=0, the body is placed
into a medium at temperature 𝑇∞, and heat transfer takes place
between the body and its environment, with a heat transfer coefficient h.
5
Lumped Element System:
the Definition
assuming that 𝑇∞ > 𝑇𝑖, the temperature remains uniform within the
body at all times and changes with time only, T =T(t).
During a differential time interval dt, the temperature of the body rises by a differential amount dT. An energy balance of the solid for
the time interval dt can be expressed as
6
Lumped Element System:
the Definition
Or:
Noting that m=ρV and dT=d(T-T∞) since T=constant, the Equation
above can be rearranged as
7
Lumped Element System:
the Definition
Integrating from t = 0, at which T = Ti, to any time t, at which T = T(t),
gives
8
Lumped Element System:
the Definition
Taking the exponential of both sides and rearranging, we obtain
where
9
Lumped Element System:
the Definition
The b is called the time constant
10
Lumped Element System:
the Definition
There are 2 point of views in the graph:
First:
The equation of b enables us to determine the temperature T(t) of a
body at time t, or alternatively, the time t required for the
temperature to reach a specified value T(t).
Second:
The temperature of a body approaches the ambient temperature T
exponentially. The temperature of the body changes rapidly at the beginning, but rather slowly later on.
11
Lumped Element System:
the Definition
A large value of b indicates that the body approaches the
environment temperature in a short time.
The larger the value of the exponent b, the higher the rate of decay
in temperature.
12
Lumped Element System:
the Applications
Metallurgical Analysis of Heat Transfer during
Heat Treatment
Casting
Hot Forging
Thermo-Forming
Vacuum Thermo-Forming, and…
13
Lumped Element Analysis:
other Apps. than Heat Transfer
14
Transient Heat Conduction:
the Separation of Variables [1]
an Intro to Nondimensionalization:
Consider an original heat conduction problem:
15
Transient Heat Conduction:
the Separation of Variables [1]
Now, Nondimensionalizing the problem lead us to:
16
Transient Heat Conduction:
the Separation of Variables [1]
Nondimensionalization reduces the number of independent
variables in one-dimensional transient conduction problems from 8
to 3, offering great convenience in the presentation of results.
The non-dimensionalized PDEs together with its boundary and initial
conditions can be solved using several analytical and numerical
techniques, including
the Laplace or other transform methods,
the method of separation of variables,
the finite difference method, and
the finite-element method.
17
Separation of Variables [1 & 2]
The method developed by J. Fourier in 1820s and is based on expanding an arbitrary function (including a constant) in terms of Fourier series.
The method is applied by assuming the dependent variable to be a product of a number of functions, each being a function of a single independent variable.
This reduces the partial differential equation to a system of ordinary differential equations, each being a function of a single independent variable.
In the case of transient conduction in a plane wall, for example, the dependent variable is the solution function θ(X, τ), which is expressed as θ(X, τ) = F(X)G(τ), and the application of the method results in two ordinary differential equation, one in X and the other in τ.
18
Separation of Variables:
Applicability
The method is applicable if:
(1) the geometry is simple and finite (such as a rectangular block, a
cylinder, or a sphere) so that the boundary surfaces can be described by simple mathematical functions, and
(2) the differential equation and the boundary and initial conditions
in their most simplified form are linear (no terms that involve products
of the dependent variable or its derivatives) and involve only one
nonhomogeneous term (a term without the dependent variable or
its derivatives).
19
Separation of Variables:
the Math Model [2]
The linear heat equation written in the form:
as the basic mathematical model.
Equation (1) describes heat transfer via conduction in a
nonhomogeneous isotropic medium and is supplemented by the
initial condition:
20
Separation of Variables:
the Math Model
and a homogeneous boundary condition, e.g. by the first-kind
condition
It is important for the method of separation of variables that the
boundary condition is homogeneous.
Therefore, if we deal with a problem with generic boundary
conditions, we should first pass to the problem with homogeneous conditions.
21
Separation of Variables:
the Math Model
The essence of the method of separation of variables (the Fourier
method) is the construction of particular solutions of (1) that can be
represented as a product:
where each factor depends on its own variable. Let us first consider
the case of a homogeneous equation (i.e. f (2, t) = 0 in (1)). We
substitute (4) into (1) and derive the equations for B(t) and v(x):
22
Separation of Variables:
the Math Model
According to (3), equation (5) is supplemented by the boundary
condition
The problem of (5) and (7) has nontrivial solutions only for some X
and is referred to as a spectral problem (the Sturm-Lioville problem).
The corresponding values of X are said to be eigenvalues and the
corresponding solutions v(x) are called eigen functions.
Let us number the eigenvalues of the problem of (5) and (7) in ascending order so that
23
Separation of Variables:
the Math Model
Given a solution of the spectral problem of (5) and (7), we can determine the general solution of (6) as
Let us now represent the solution of (1)-(3) with f(x,t) = 0 as a superposition of constructed particular solutions
The coefficients 𝑐𝑛 are determined by the initial condition (2), namely 𝑐𝑛 = 𝑢0, 𝑣𝑛 𝑐, are the coefficients in the expansion of the function 𝑢0 𝑥in the eigen functions 𝑣𝑛 𝑥 𝑐(the Fourier coefficients).
24
Separation of Variables:
the Math Model
Thus, we derived the solution with f(x, t) = 0 in the form:
In the case of nonhomogeneous equation (1), representation (9) in the method of separation of variables includes an additional term,
namely
25
Separation of Variables:
the Solution Form
We thus obtained the general solution (10) of the heat transfer
problem (1)-(3). The cases of the first- or second-kind boundary
conditions, mixed boundary conditions, etc. are proceeded with similarly.
Since the solution is represented as an infinite series, it is often
necessary to simplify the original problem to get a simpler solution.
The general solution is constructed given the solution of the spectral
problem in (5) and (7).
Note that the solution of this problem is known only in a few cases,
and most textbooks on heat transfer do not present these solutions.
26
Separation of Variables:
an Example
Let us find the solution of the simplest one-dimensional problem in
which x = (0,l). We consider the heat equation
with initial and boundary conditions in (2) and (3), respectively.
The corresponding eigenvalue problem (see (5) and (7)) becomes
27
Separation of Variables:
an Example
The eigenvalue problem in (12) and (13) has the solution
The solution of (11) is thus presented according to (lo), (14) and the
conditions in (2) and (3).
28
Separation of Variables:
the Applications [5]
Mathematical Models of Heat Flow in Edge-Emitting Semiconductor
Lasers:
29
Separation of Variables:
the Applications
Basic thermal behavior of an edge-emitting laser can be described
by the stationary heat conduction equation:
The heat power density is determined according to the crude
approximation:
Assuming no heat escape from the side walls:
30
Separation of Variables:
the Applications
Using the separation of variables approach, one obtains the solution
for T in two-fold form. In the layers above the active layer (n - even)
temperature is described by:
And for n - odd:
31
References for Further Readings
1) Y.A. Çengel, Introduction to Thermodynamics & Heat Transfer, 2nd
ed., 2008, pp475-481.
2) A.A. Samarskii, Computational Heat Transfer, Vol. 1: Mathematical Modelling, 1995, pp62-65.
3) G.E. Myers, Analytical Methods in Conduction Heat Transfer, 1st ed.,
1966, pp74-85.
4) H.D. Bähr, K. Stephan, Heat and Mass Transfer, 3rd ed., 2011, pp144-
174.
5) V.S. Vikhrenko, Heat Transfer - Engineering Applications, 2011, pp7-24.
32